* [ALSA - driver 0000935]: M-Audio Delta 1010-LT; S/PDIF out = 0Volts on device open
@ 2005-02-23 19:09 bugtrack
0 siblings, 0 replies; 3+ messages in thread
From: bugtrack @ 2005-02-23 19:09 UTC (permalink / raw)
To: alsa-devel
The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=935>
======================================================================
Reported By: stever8
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 935
Category: PCI - ice1712
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Redhat Linux 7.3, modified
Kernel Version: 2.4.26
======================================================================
Date Submitted: 02-23-2005 20:09 CET
Last Modified: 02-23-2005 20:09 CET
======================================================================
Summary: M-Audio Delta 1010-LT; S/PDIF out = 0Volts on device
open
Description:
Our original report:
When we first load the alsa drivers, we see a S/PDIF output signal from
the 1010LT
on an oscilloscope. A minidisc player also sees this as a valid signal (it
is all
zeros, silence).
As soon as our program opens the audio device, however, the signal goes
to 0V on the oscilloscope, and the minidisc of course sees "no signal".
We can't output S/PDIF, no matter what settings we try in Envy24control.
Strangely enough, if we do the following, we do get S/PDIF output :
. Plug in an external S/PDIF input source (which is muted so as not to
mix
with our sound).
. In Envy24control, set the Master Clock to "Word Clock". (it doesn't work
if the
master clock is set to "S/PDIF")
Jaroslav Kysela suggested:
Strange. Could you try to comment lines:
//if (reset)
// snd_cs8427_reset(cs8427);
in alsa-kernel/i2c/cs8427.c and test if the signal is present after this
change?
Which I did. The S/PDIF signal no longer goes away (it appears on the
scope, and the minidisc player recognizes it as a valid signal) however it
just contains silence.
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
02-23-05 20:09 stever8 New Issue
02-23-05 20:09 stever8 Distribution => Redhat Linux 7.3,
modified
02-23-05 20:09 stever8 Kernel Version => 2.4.26
======================================================================
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ALSA - driver 0000935]: M-Audio Delta 1010-LT; S/PDIF out = 0Volts on device open
@ 2005-09-19 8:06 bugtrack
0 siblings, 0 replies; 3+ messages in thread
From: bugtrack @ 2005-09-19 8:06 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=935>
======================================================================
Reported By: stever8
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 935
Category: PCI - ice1712
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Redhat Linux 7.3, modified
Kernel Version: 2.4.26
======================================================================
Date Submitted: 02-23-2005 20:09 CET
Last Modified: 09-19-2005 10:06 CEST
======================================================================
Summary: M-Audio Delta 1010-LT; S/PDIF out = 0Volts on device
open
Description:
Our original report:
When we first load the alsa drivers, we see a S/PDIF output signal from
the 1010LT
on an oscilloscope. A minidisc player also sees this as a valid signal (it
is all
zeros, silence).
As soon as our program opens the audio device, however, the signal goes
to 0V on the oscilloscope, and the minidisc of course sees "no signal".
We can't output S/PDIF, no matter what settings we try in Envy24control.
Strangely enough, if we do the following, we do get S/PDIF output :
. Plug in an external S/PDIF input source (which is muted so as not to
mix
with our sound).
. In Envy24control, set the Master Clock to "Word Clock". (it doesn't work
if the
master clock is set to "S/PDIF")
Jaroslav Kysela suggested:
Strange. Could you try to comment lines:
//if (reset)
// snd_cs8427_reset(cs8427);
in alsa-kernel/i2c/cs8427.c and test if the signal is present after this
change?
Which I did. The S/PDIF signal no longer goes away (it appears on the
scope, and the minidisc player recognizes it as a valid signal) however it
just contains silence.
======================================================================
----------------------------------------------------------------------
jdthood - 09-19-05 10:06
----------------------------------------------------------------------
stever8: Were you able to solve this problem? Have you tried playing with
the various mixer switches listed by amixer?
Issue History
Date Modified Username Field Change
======================================================================
02-23-05 20:09 stever8 New Issue
02-23-05 20:09 stever8 Distribution => Redhat Linux 7.3,
modified
02-23-05 20:09 stever8 Kernel Version => 2.4.26
09-19-05 10:06 jdthood Note Added: 0006284
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server.
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ALSA - driver 0000935]: M-Audio Delta 1010-LT; S/PDIF out = 0Volts on device open
@ 2005-12-30 22:23 bugtrack
0 siblings, 0 replies; 3+ messages in thread
From: bugtrack @ 2005-12-30 22:23 UTC (permalink / raw)
To: alsa-devel
The following issue has been CLOSED
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=935>
======================================================================
Reported By: stever8
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 935
Category: PCI - ice1712
Reproducibility: always
Severity: major
Priority: normal
Status: closed
Distribution: Redhat Linux 7.3, modified
Kernel Version: 2.4.26
Resolution: open
Fixed in Version:
======================================================================
Date Submitted: 02-23-2005 20:09 CET
Last Modified: 12-30-2005 23:23 CET
======================================================================
Summary: M-Audio Delta 1010-LT; S/PDIF out = 0Volts on device
open
Description:
Our original report:
When we first load the alsa drivers, we see a S/PDIF output signal from
the 1010LT
on an oscilloscope. A minidisc player also sees this as a valid signal (it
is all
zeros, silence).
As soon as our program opens the audio device, however, the signal goes
to 0V on the oscilloscope, and the minidisc of course sees "no signal".
We can't output S/PDIF, no matter what settings we try in Envy24control.
Strangely enough, if we do the following, we do get S/PDIF output :
. Plug in an external S/PDIF input source (which is muted so as not to
mix
with our sound).
. In Envy24control, set the Master Clock to "Word Clock". (it doesn't work
if the
master clock is set to "S/PDIF")
Jaroslav Kysela suggested:
Strange. Could you try to comment lines:
//if (reset)
// snd_cs8427_reset(cs8427);
in alsa-kernel/i2c/cs8427.c and test if the signal is present after this
change?
Which I did. The S/PDIF signal no longer goes away (it appears on the
scope, and the minidisc player recognizes it as a valid signal) however it
just contains silence.
======================================================================
----------------------------------------------------------------------
jdthood - 09-19-05 10:06
----------------------------------------------------------------------
stever8: Were you able to solve this problem? Have you tried playing with
the various mixer switches listed by amixer?
----------------------------------------------------------------------
rlrevell - 12-30-05 23:23
----------------------------------------------------------------------
No response
Issue History
Date Modified Username Field Change
======================================================================
02-23-05 20:09 stever8 New Issue
02-23-05 20:09 stever8 Distribution => Redhat Linux 7.3,
modified
02-23-05 20:09 stever8 Kernel Version => 2.4.26
09-19-05 10:06 jdthood Note Added: 0006284
12-30-05 23:23 rlrevell Status new => closed
12-30-05 23:23 rlrevell Note Added: 0007287
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-12-30 22:23 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-12-30 22:23 [ALSA - driver 0000935]: M-Audio Delta 1010-LT; S/PDIF out = 0Volts on device open bugtrack
-- strict thread matches above, loose matches on Subject: below --
2005-09-19 8:06 bugtrack
2005-02-23 19:09 bugtrack
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox