From: Patrick Shirkey <pshirkey@boosthardware.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: Re: USB recording - repetitive peaks
Date: Fri, 05 Jul 2002 01:23:18 +0900 [thread overview]
Message-ID: <3D247676.8090309@boosthardware.com> (raw)
In-Reply-To: s5hpty5ry0y.wl@alsa2.suse.de
Takashi Iwai wrote:
>the hang-up at capture close was at least fixed on cvs.
>it was due to the combination of ASYNC_UNLINK and complete callbacks.
>
>not sure whether the bug with jack is fixed, too, but i think it was
>caused by the same reason. please update the cvs tree.
I can now record successfully using arecord without hanging the system
but now I get an instant lock up while starting ardour. :( I have a
suspicion that it happens when ardour registers with jackd and asks for
the available input devices. (I'm not sure about the sound quality. I
will see if I can generate a test tone to use instead of actual music).
The only way to get out of it is reboot using sysreq.
I will check some more. Please note this wasn't happening so quickly
yesterday.
I'm not sure about the sound quality it is definitely better. I will see
if I can generate a test tone to use instead of actual music.
--
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.boosthardware.com/LAU/guide/
========================================
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Caffeinated soap. No kidding.
http://thinkgeek.com/sf
next prev parent reply other threads:[~2002-07-04 16:23 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-01 17:07 [PATCH] USB MIDI driver Clemens Ladisch
2002-07-02 10:36 ` Takashi Iwai
2002-07-02 14:28 ` USB recording - repetitive peaks Patrick Shirkey
2002-07-02 14:57 ` Takashi Iwai
2002-07-02 15:35 ` Patrick Shirkey
2002-07-02 16:03 ` Takashi Iwai
2002-07-02 16:37 ` Patrick Shirkey
2002-07-02 16:39 ` Takashi Iwai
2002-07-02 17:08 ` Patrick Shirkey
2002-07-02 17:29 ` Takashi Iwai
2002-07-02 18:04 ` Patrick Shirkey
2002-07-02 18:26 ` Patrick Shirkey
2002-07-02 18:38 ` Patrick Shirkey
2002-07-04 9:41 ` Takashi Iwai
2002-07-03 8:55 ` Takashi Iwai
2002-07-04 16:23 ` Patrick Shirkey [this message]
2002-07-04 16:26 ` Takashi Iwai
2002-07-04 17:15 ` Patrick Shirkey
2002-07-04 17:27 ` Paul Davis
2002-07-05 13:44 ` Takashi Iwai
2002-07-05 18:19 ` Patrick Shirkey
2002-07-05 18:37 ` Patrick Shirkey
2002-07-04 18:59 ` Thorsten Haas
2002-07-05 6:56 ` Thorsten Haas
2002-07-05 8:34 ` Patrick Shirkey
2002-07-05 8:38 ` Thorsten Haas
2002-07-05 9:06 ` Thorsten Haas
2002-07-05 15:35 ` Takashi Iwai
2002-07-03 5:18 ` Fernando Pablo Lopez-Lezcano
2002-07-03 8:50 ` Takashi Iwai
2002-07-02 16:07 ` Patrick Shirkey
2002-07-02 14:51 ` Re: [PATCH] USB MIDI driver Takashi Iwai
2002-07-02 20:40 ` Pedro Lopez-Cabanillas
2002-07-02 22:10 ` Pedro Lopez-Cabanillas
2002-07-03 12:52 ` Clemens Ladisch
2002-07-03 13:18 ` Takashi Iwai
2002-07-03 14:42 ` Clemens Ladisch
2002-07-04 9:47 ` Takashi Iwai
2002-07-04 11:52 ` Clemens Ladisch
2002-07-05 7:55 ` Clemens Ladisch
2002-07-05 13:40 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2002-07-05 18:11 Re: USB recording - repetitive peaks Patrick Shirkey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D247676.8090309@boosthardware.com \
--to=pshirkey@boosthardware.com \
--cc=alsa-devel@lists.sourceforge.net \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox