From: Takashi Iwai <tiwai@suse.de>
To: Patrick Shirkey <pshirkey@boosthardware.com>
Cc: thorsten.haas@gmx.de, alsa-devel@lists.sourceforge.net
Subject: Re: Re: USB recording - repetitive peaks
Date: Thu, 04 Jul 2002 11:41:30 +0200 [thread overview]
Message-ID: <s5h3cuzsud1.wl@alsa2.suse.de> (raw)
In-Reply-To: <3D21F331.7090609@boosthardware.com>
At Wed, 03 Jul 2002 03:38:41 +0900,
Patrick Shirkey wrote:
>
> Patrick Shirkey wrote:
> > Patrick Shirkey wrote:
> >
> >> I did run make install and have just done so again to make sure but
> >> it's not in /usr/local/share/aclocal either. I will copy it over and
> >> try recording again (see below).
> >>
> >> >
> >
> > >> Recording was a bit messy, due to killing the arecord process
> > freezes my >> box.
> > >> Deterministically: whenever the process is interuppted (Ctrl-C) or
> > killed
> > >> (sig 9).
> >
> > This seems to be the same here now. The file was recorded and with no
> > distortions
> > to the sound but arecord hangs my rig when it stops. I'll check with
> > JACK+ardour.
> >
> >
>
> Ouch. JACK+ardour causes an instant hang. Using alt+sysreq I can sync
> unmount and reboot but nothing else. Also the sound quality is
> significantly degraded while running through JACK. At least the native
> drivers are sounding correct now though :)
the hang-up at capture close was at least fixed on cvs.
it was due to the combination of ASYNC_UNLINK and complete callbacks.
not sure whether the bug with jack is fixed, too, but i think it was
caused by the same reason. please update the cvs tree.
Takashi
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Caffeinated soap. No kidding.
http://thinkgeek.com/sf
next prev parent reply other threads:[~2002-07-04 9:41 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-01 17:07 [PATCH] USB MIDI driver Clemens Ladisch
2002-07-02 10:36 ` Takashi Iwai
2002-07-02 14:28 ` USB recording - repetitive peaks Patrick Shirkey
2002-07-02 14:57 ` Takashi Iwai
2002-07-02 15:35 ` Patrick Shirkey
2002-07-02 16:03 ` Takashi Iwai
2002-07-02 16:37 ` Patrick Shirkey
2002-07-02 16:39 ` Takashi Iwai
2002-07-02 17:08 ` Patrick Shirkey
2002-07-02 17:29 ` Takashi Iwai
2002-07-02 18:04 ` Patrick Shirkey
2002-07-02 18:26 ` Patrick Shirkey
2002-07-02 18:38 ` Patrick Shirkey
2002-07-04 9:41 ` Takashi Iwai [this message]
2002-07-03 8:55 ` Takashi Iwai
2002-07-04 16:23 ` Patrick Shirkey
2002-07-04 16:26 ` Takashi Iwai
2002-07-04 17:15 ` Patrick Shirkey
2002-07-04 17:27 ` Paul Davis
2002-07-05 13:44 ` Takashi Iwai
2002-07-05 18:19 ` Patrick Shirkey
2002-07-05 18:37 ` Patrick Shirkey
2002-07-04 18:59 ` Thorsten Haas
2002-07-05 6:56 ` Thorsten Haas
2002-07-05 8:34 ` Patrick Shirkey
2002-07-05 8:38 ` Thorsten Haas
2002-07-05 9:06 ` Thorsten Haas
2002-07-05 15:35 ` Takashi Iwai
2002-07-03 5:18 ` Fernando Pablo Lopez-Lezcano
2002-07-03 8:50 ` Takashi Iwai
2002-07-02 16:07 ` Patrick Shirkey
2002-07-02 14:51 ` Re: [PATCH] USB MIDI driver Takashi Iwai
2002-07-02 20:40 ` Pedro Lopez-Cabanillas
2002-07-02 22:10 ` Pedro Lopez-Cabanillas
2002-07-03 12:52 ` Clemens Ladisch
2002-07-03 13:18 ` Takashi Iwai
2002-07-03 14:42 ` Clemens Ladisch
2002-07-04 9:47 ` Takashi Iwai
2002-07-04 11:52 ` Clemens Ladisch
2002-07-05 7:55 ` Clemens Ladisch
2002-07-05 13:40 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2002-07-05 18:11 Re: USB recording - repetitive peaks Patrick Shirkey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h3cuzsud1.wl@alsa2.suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@lists.sourceforge.net \
--cc=pshirkey@boosthardware.com \
--cc=thorsten.haas@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox