From: Takashi Sakamoto <o-takashi@sakamocchi.jp>
To: Clemens Ladisch <clemens@ladisch.de>, Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org,
Stefan Richter <stefanr@s5r6.in-berlin.de>,
kbuild test robot <lkp@intel.com>,
ffado-devel@lists.sf.net, kbuild-all@01.org
Subject: Re: [PATCH 1/7] ALSA: firewire-tascam: add skeleton for TASCAM FireWire series
Date: Sat, 3 Oct 2015 18:57:34 +0900 [thread overview]
Message-ID: <560FA68E.8050501@sakamocchi.jp> (raw)
In-Reply-To: <560F9C6E.70800@ladisch.de>
On 2015年10月03日 18:14, Clemens Ladisch wrote:
> Takashi Sakamoto wrote:
>>>>> 23 data = be32_to_cpu(fw_dev->config_rom[28]);
>>
>> About using 'be32_to_cpu()', the 'config_rom' member actually has 'const
>> u32 *', while in the member caracters in the textual leaf are aligned in
>> big-endian.
>
> Strictly speaking, strings do not have an endianness.
>
> Most data in the actual configuration ROM is organized as big-endian 32-
> bit values, so the FireWire core converts _all_ words from big endian to
> CPU endian. The words that are not actually 32-bit values but strings
> have to be converted back; the correct function for this is cpu_to_be32().
Yes. And I forgot a pair of cpu_to_be32/be32_to_cpu is symmetric each other!
(I'm really a stupid guy, sigh...)
This patch solves the sparce warnings.
$ git diff
diff --git a/sound/firewire/tascam/tascam.c b/sound/firewire/tascam/tascam.c
index ee2f498..6e1087e 100644
--- a/sound/firewire/tascam/tascam.c
+++ b/sound/firewire/tascam/tascam.c
@@ -50,19 +50,19 @@ static int check_name(struct snd_tscm *tscm)
struct fw_device *fw_dev = fw_parent_device(tscm->unit);
char vendor[8];
char model[8];
- __u32 data;
+ __be32 data;
/* Retrieve model name. */
- data = be32_to_cpu(fw_dev->config_rom[28]);
+ data = cpu_to_be32(fw_dev->config_rom[28]);
memcpy(model, &data, 4);
- data = be32_to_cpu(fw_dev->config_rom[29]);
+ data = cpu_to_be32(fw_dev->config_rom[29]);
memcpy(model + 4, &data, 4);
model[7] = '\0';
/* Retrieve vendor name. */
- data = be32_to_cpu(fw_dev->config_rom[23]);
+ data = cpu_to_be32(fw_dev->config_rom[23]);
memcpy(vendor, &data, 4);
- data = be32_to_cpu(fw_dev->config_rom[24]);
+ data = cpu_to_be32(fw_dev->config_rom[24]);
memcpy(vendor + 4, &data, 4);
vendor[7] = '\0';
> Iwai-san,
Should I re-post this patchset? Or you kindly merge them with your
modification?
Regards
Takashi Sakamoto
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2015-10-03 9:57 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-01 13:02 [PATCH 0/7 v3] firewire-tascam: new driver for TASCAM FireWire series Takashi Sakamoto
2015-10-01 13:02 ` [PATCH 1/7] ALSA: firewire-tascam: add skeleton " Takashi Sakamoto
2015-10-01 13:54 ` kbuild test robot
2015-10-02 16:24 ` Takashi Iwai
2015-10-02 18:47 ` Clemens Ladisch
2015-10-03 2:34 ` Takashi Sakamoto
2015-10-03 8:51 ` Takashi Iwai
2015-10-03 10:33 ` Stefan Richter
2015-10-03 9:14 ` Clemens Ladisch
2015-10-03 9:57 ` Takashi Sakamoto [this message]
2015-10-03 10:54 ` Stefan Richter
2015-10-04 11:54 ` Takashi Sakamoto
2015-10-03 16:07 ` Takashi Iwai
2015-10-03 23:33 ` Takashi Sakamoto
2015-10-01 13:02 ` [PATCH 2/7] ALSA: firewire-tascam: add a structure for model-dependent parameters Takashi Sakamoto
2015-10-01 13:02 ` [PATCH 3/7] ALSA: firewire-tascam: add proc node to show firmware information Takashi Sakamoto
2015-10-01 13:02 ` [PATCH 4/7] ALSA: firewire-tascam: add data block processing layer Takashi Sakamoto
2015-10-01 13:02 ` [PATCH 5/7] ALSA: firewire-tascam: add streaming functionality Takashi Sakamoto
2015-10-01 13:02 ` [PATCH 6/7] ALSA: firewire-tascam: add PCM functionality Takashi Sakamoto
2015-10-01 13:02 ` [PATCH 7/7] ALSA: firewire-tascam: add hwdep interface Takashi Sakamoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=560FA68E.8050501@sakamocchi.jp \
--to=o-takashi@sakamocchi.jp \
--cc=alsa-devel@alsa-project.org \
--cc=clemens@ladisch.de \
--cc=ffado-devel@lists.sf.net \
--cc=kbuild-all@01.org \
--cc=lkp@intel.com \
--cc=stefanr@s5r6.in-berlin.de \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox