* [ALSA - driver 0001694]: snd-intel8x0m unable to initialize the Modem device ICH6
@ 2005-12-29 21:43 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2005-12-29 21:43 UTC (permalink / raw)
To: alsa-devel
The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1694>
======================================================================
Reported By: guido
Assigned To: sashak
======================================================================
Project: ALSA - driver
Issue ID: 1694
Category: PCI - intel8x0m
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
Distribution: Debian "Sarge" with kernel and alsa from "SID"
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-29-2005 22:43 CET
Last Modified: 12-29-2005 22:43 CET
======================================================================
Summary: snd-intel8x0m unable to initialize the Modem device
ICH6
Description:
Dear Maintainer and Reader,
I couldn't get the modem in my Notebook "Acer Aspire 1692WLMi" working.
I found a lot of things recommended in different Mailing lists and blogs
but they did not solve my problem. I use alsa Ver. 1.0.10-1 with
kernel Version 2.6.14 with source from Debian "SID".
The current status is that two modules are loaded during boot,
snd-intel8x0 and snd-intel8x0m. When both modules are loaded
the sound doesn't works. Only when snd-intel8x0 is loaded alone the sound
works fine.
If I additionally load module snd-intel8x0m sound does not work anymore
and error messages in syslog are printed.
So I think the error messages are a buck in the snd-intel8x0m module.
There is no /proc/asound/Modem present when I load the snd-intel8x0m
module.
In the "Additional Information" Section I paste some debugging output.
Regards
Guido
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
12-29-05 22:43 guido New Issue
12-29-05 22:43 guido Distribution => Debian "Sarge" with
kernel and alsa from "SID"
12-29-05 22:43 guido Kernel Version => 2.6.14
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0001694]: snd-intel8x0m unable to initialize the Modem device ICH6
@ 2006-01-07 0:56 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2006-01-07 0:56 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1694>
======================================================================
Reported By: guido
Assigned To: sashak
======================================================================
Project: ALSA - driver
Issue ID: 1694
Category: PCI - intel8x0m
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
Distribution: Debian "Sarge" with kernel and alsa from "SID"
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-29-2005 22:43 CET
Last Modified: 01-07-2006 01:56 CET
======================================================================
Summary: snd-intel8x0m unable to initialize the Modem device
ICH6
Description:
Dear Maintainer and Reader,
I couldn't get the modem in my Notebook "Acer Aspire 1692WLMi" working.
I found a lot of things recommended in different Mailing lists and blogs
but they did not solve my problem. I use alsa Ver. 1.0.10-1 with
kernel Version 2.6.14 with source from Debian "SID".
The current status is that two modules are loaded during boot,
snd-intel8x0 and snd-intel8x0m. When both modules are loaded
the sound doesn't works. Only when snd-intel8x0 is loaded alone the sound
works fine.
If I additionally load module snd-intel8x0m sound does not work anymore
and error messages in syslog are printed.
So I think the error messages are a buck in the snd-intel8x0m module.
There is no /proc/asound/Modem present when I load the snd-intel8x0m
module.
In the "Additional Information" Section I paste some debugging output.
Regards
Guido
======================================================================
----------------------------------------------------------------------
sashak - 01-07-06 01:56
----------------------------------------------------------------------
I think there is Conexant's AMC (audio/modem codec) - CXT30, Conexant modem
codecs are not supported by intel8x0m (due to lack of docs), so this will
not be helpful anyway.
Of course intel8x0m driver loading sould not lead to problems with sound.
This problem may be investigated. If you are with recent version of
alsa-driver could you send output of 'dmesg' after snd-intel8x0m loading?
Issue History
Date Modified Username Field Change
======================================================================
12-29-05 22:43 guido New Issue
12-29-05 22:43 guido Distribution => Debian "Sarge" with
kernel and alsa from "SID"
12-29-05 22:43 guido Kernel Version => 2.6.14
01-03-06 20:51 guido Issue Monitored: guido
01-07-06 01:56 sashak Note Added: 0007501
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0001694]: snd-intel8x0m unable to initialize the Modem device ICH6
@ 2006-01-07 0:57 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2006-01-07 0:57 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1694>
======================================================================
Reported By: guido
Assigned To: sashak
======================================================================
Project: ALSA - driver
Issue ID: 1694
Category: PCI - intel8x0m
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
Distribution: Debian "Sarge" with kernel and alsa from "SID"
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-29-2005 22:43 CET
Last Modified: 01-07-2006 01:57 CET
======================================================================
Summary: snd-intel8x0m unable to initialize the Modem device
ICH6
Description:
Dear Maintainer and Reader,
I couldn't get the modem in my Notebook "Acer Aspire 1692WLMi" working.
I found a lot of things recommended in different Mailing lists and blogs
but they did not solve my problem. I use alsa Ver. 1.0.10-1 with
kernel Version 2.6.14 with source from Debian "SID".
The current status is that two modules are loaded during boot,
snd-intel8x0 and snd-intel8x0m. When both modules are loaded
the sound doesn't works. Only when snd-intel8x0 is loaded alone the sound
works fine.
If I additionally load module snd-intel8x0m sound does not work anymore
and error messages in syslog are printed.
So I think the error messages are a buck in the snd-intel8x0m module.
There is no /proc/asound/Modem present when I load the snd-intel8x0m
module.
In the "Additional Information" Section I paste some debugging output.
Regards
Guido
======================================================================
----------------------------------------------------------------------
sashak - 01-07-06 01:56
----------------------------------------------------------------------
I think there is Conexant's AMC (audio/modem codec) - CXT30, Conexant modem
codecs are not supported by intel8x0m (due to lack of docs), so this will
not be helpful anyway.
Of course intel8x0m driver loading sould not lead to problems with sound.
This problem may be investigated. If you are with recent version of
alsa-driver could you send output of 'dmesg' after snd-intel8x0m loading?
----------------------------------------------------------------------
sashak - 01-07-06 01:57
----------------------------------------------------------------------
And could you try attached patch?
Issue History
Date Modified Username Field Change
======================================================================
12-29-05 22:43 guido New Issue
12-29-05 22:43 guido Distribution => Debian "Sarge" with
kernel and alsa from "SID"
12-29-05 22:43 guido Kernel Version => 2.6.14
01-03-06 20:51 guido Issue Monitored: guido
01-07-06 01:56 sashak Note Added: 0007501
01-07-06 01:57 sashak File Added: ich-cxt30amc-test.patch
01-07-06 01:57 sashak Note Added: 0007502
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0001694]: snd-intel8x0m unable to initialize the Modem device ICH6
@ 2006-01-12 22:40 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2006-01-12 22:40 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1694>
======================================================================
Reported By: guido
Assigned To: sashak
======================================================================
Project: ALSA - driver
Issue ID: 1694
Category: PCI - intel8x0m
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
Distribution: Debian "Sarge" with kernel and alsa from "SID"
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-29-2005 22:43 CET
Last Modified: 01-12-2006 23:40 CET
======================================================================
Summary: snd-intel8x0m unable to initialize the Modem device
ICH6
Description:
Dear Maintainer and Reader,
I couldn't get the modem in my Notebook "Acer Aspire 1692WLMi" working.
I found a lot of things recommended in different Mailing lists and blogs
but they did not solve my problem. I use alsa Ver. 1.0.10-1 with
kernel Version 2.6.14 with source from Debian "SID".
The current status is that two modules are loaded during boot,
snd-intel8x0 and snd-intel8x0m. When both modules are loaded
the sound doesn't works. Only when snd-intel8x0 is loaded alone the sound
works fine.
If I additionally load module snd-intel8x0m sound does not work anymore
and error messages in syslog are printed.
So I think the error messages are a buck in the snd-intel8x0m module.
There is no /proc/asound/Modem present when I load the snd-intel8x0m
module.
In the "Additional Information" Section I paste some debugging output.
Regards
Guido
======================================================================
----------------------------------------------------------------------
sashak - 01-07-06 01:57
----------------------------------------------------------------------
And could you try attached patch?
----------------------------------------------------------------------
guido - 01-12-06 23:40
----------------------------------------------------------------------
here is what I did:
- Downloaded the alsa-driver-1.0.11rc2 source package
- Unpacked it
- made ./configure from within the alsa source directory
- executed "make" and "make install"
so the newly created modules have been installed into my kernel
modules package.
- rebooted
- looked at /var/log/syslog and found the following alsa message:
ALSA
/home/guido/software/alsa/alsa-driver-1.0.11rc2/pci/ac97/ac97_codec.c:2002:
MC'97 0 converters and GPIO not ready (0x1)
- Improvements to Version 1.0.10:
Sound works now from boot with snd-intel8x0 and snd-intel8x0m module
loaded
at the same time.
A valid modem device "/dev/ttySL0 -> /dev/pts/0" is now created.
(before I used alsa driver Version 1.0.10)
- Now I did the same things with the patch provided from you for
intel8x0m.c
but the /var/log/syslog output was the same.
- See attached syslog File The output looks everytime the same with
patched
Version or original 1.0.11rc2.
Issue History
Date Modified Username Field Change
======================================================================
12-29-05 22:43 guido New Issue
12-29-05 22:43 guido Distribution => Debian "Sarge" with
kernel and alsa from "SID"
12-29-05 22:43 guido Kernel Version => 2.6.14
01-03-06 20:51 guido Issue Monitored: guido
01-07-06 01:56 sashak Note Added: 0007501
01-07-06 01:57 sashak File Added: ich-cxt30amc-test.patch
01-07-06 01:57 sashak Note Added: 0007502
01-12-06 23:39 guido File Added: syslog
01-12-06 23:40 guido Note Added: 0007593
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0001694]: snd-intel8x0m unable to initialize the Modem device ICH6
@ 2006-01-12 23:21 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2006-01-12 23:21 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1694>
======================================================================
Reported By: guido
Assigned To: sashak
======================================================================
Project: ALSA - driver
Issue ID: 1694
Category: PCI - intel8x0m
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
Distribution: Debian "Sarge" with kernel and alsa from "SID"
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-29-2005 22:43 CET
Last Modified: 01-13-2006 00:21 CET
======================================================================
Summary: snd-intel8x0m unable to initialize the Modem device
ICH6
Description:
Dear Maintainer and Reader,
I couldn't get the modem in my Notebook "Acer Aspire 1692WLMi" working.
I found a lot of things recommended in different Mailing lists and blogs
but they did not solve my problem. I use alsa Ver. 1.0.10-1 with
kernel Version 2.6.14 with source from Debian "SID".
The current status is that two modules are loaded during boot,
snd-intel8x0 and snd-intel8x0m. When both modules are loaded
the sound doesn't works. Only when snd-intel8x0 is loaded alone the sound
works fine.
If I additionally load module snd-intel8x0m sound does not work anymore
and error messages in syslog are printed.
So I think the error messages are a buck in the snd-intel8x0m module.
There is no /proc/asound/Modem present when I load the snd-intel8x0m
module.
In the "Additional Information" Section I paste some debugging output.
Regards
Guido
======================================================================
----------------------------------------------------------------------
guido - 01-12-06 23:43
----------------------------------------------------------------------
here is what I did:
- Downloaded the alsa-driver-1.0.11rc2 source package
- Unpacked it
- made ./configure from within the alsa source directory
- executed "make" and "make install"
so the newly created modules have been installed into my kernel
modules package.
- rebooted
- looked at /var/log/syslog and found the following alsa message:
ALSA
/home/guido/software/alsa/alsa-driver-1.0.11rc2/pci/ac97/ac97_codec.c:2002:
MC'97 0 converters and GPIO not ready (0x1)
- Improvements to Version 1.0.10:
Sound works now from boot with snd-intel8x0 and snd-intel8x0m module
loaded
at the same time.
A valid modem device "/dev/ttySL0 -> /dev/pts/0" is now created.
(before I used alsa driver Version 1.0.10)
- Now I did the same things with the patch provided from you for
intel8x0m.c
but the /var/log/syslog output was the same.
- See attached syslog File The output looks everytime the same with
patched
Version or original 1.0.11rc2.
- Sound works but there is no modem dialtone. I think because of the
ac97_codec error in syslog.
----------------------------------------------------------------------
sashak - 01-13-06 00:21
----------------------------------------------------------------------
This modem (CXT30) is unsupported and will not work.
The only good result is that sound is ok.
Issue History
Date Modified Username Field Change
======================================================================
12-29-05 22:43 guido New Issue
12-29-05 22:43 guido Distribution => Debian "Sarge" with
kernel and alsa from "SID"
12-29-05 22:43 guido Kernel Version => 2.6.14
01-03-06 20:51 guido Issue Monitored: guido
01-07-06 01:56 sashak Note Added: 0007501
01-07-06 01:57 sashak File Added: ich-cxt30amc-test.patch
01-07-06 01:57 sashak Note Added: 0007502
01-12-06 23:39 guido File Added: syslog
01-12-06 23:40 guido Note Added: 0007593
01-12-06 23:43 guido Note Edited: 0007593
01-13-06 00:21 sashak Note Added: 0007601
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0001694]: snd-intel8x0m unable to initialize the Modem device ICH6
@ 2006-01-13 9:06 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2006-01-13 9:06 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1694>
======================================================================
Reported By: guido
Assigned To: sashak
======================================================================
Project: ALSA - driver
Issue ID: 1694
Category: PCI - intel8x0m
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
Distribution: Debian "Sarge" with kernel and alsa from "SID"
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-29-2005 22:43 CET
Last Modified: 01-13-2006 10:06 CET
======================================================================
Summary: snd-intel8x0m unable to initialize the Modem device
ICH6
Description:
Dear Maintainer and Reader,
I couldn't get the modem in my Notebook "Acer Aspire 1692WLMi" working.
I found a lot of things recommended in different Mailing lists and blogs
but they did not solve my problem. I use alsa Ver. 1.0.10-1 with
kernel Version 2.6.14 with source from Debian "SID".
The current status is that two modules are loaded during boot,
snd-intel8x0 and snd-intel8x0m. When both modules are loaded
the sound doesn't works. Only when snd-intel8x0 is loaded alone the sound
works fine.
If I additionally load module snd-intel8x0m sound does not work anymore
and error messages in syslog are printed.
So I think the error messages are a buck in the snd-intel8x0m module.
There is no /proc/asound/Modem present when I load the snd-intel8x0m
module.
In the "Additional Information" Section I paste some debugging output.
Regards
Guido
======================================================================
----------------------------------------------------------------------
sashak - 01-13-06 00:21
----------------------------------------------------------------------
This modem (CXT30) is unsupported and will not work.
The only good result is that sound is ok.
----------------------------------------------------------------------
guido - 01-13-06 10:06
----------------------------------------------------------------------
What gives you the Information that this is a CXT30 Modem?
Or is ICH6 Modem controller and CXT30 the same?
My lspci says that is a ICH6 Modem:
lspci output:
...
0000:00:1e.2 Multimedia audio controller: Intel Corp.
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
0000:00:1e.3 Modem: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97
Modem Controller (rev 04)
...
Issue History
Date Modified Username Field Change
======================================================================
12-29-05 22:43 guido New Issue
12-29-05 22:43 guido Distribution => Debian "Sarge" with
kernel and alsa from "SID"
12-29-05 22:43 guido Kernel Version => 2.6.14
01-03-06 20:51 guido Issue Monitored: guido
01-07-06 01:56 sashak Note Added: 0007501
01-07-06 01:57 sashak File Added: ich-cxt30amc-test.patch
01-07-06 01:57 sashak Note Added: 0007502
01-12-06 23:39 guido File Added: syslog
01-12-06 23:40 guido Note Added: 0007593
01-12-06 23:43 guido Note Edited: 0007593
01-13-06 00:21 sashak Note Added: 0007601
01-13-06 10:06 guido Note Added: 0007636
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0001694]: snd-intel8x0m unable to initialize the Modem device ICH6
@ 2006-01-13 9:15 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2006-01-13 9:15 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1694>
======================================================================
Reported By: guido
Assigned To: sashak
======================================================================
Project: ALSA - driver
Issue ID: 1694
Category: PCI - intel8x0m
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
Distribution: Debian "Sarge" with kernel and alsa from "SID"
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-29-2005 22:43 CET
Last Modified: 01-13-2006 10:15 CET
======================================================================
Summary: snd-intel8x0m unable to initialize the Modem device
ICH6
Description:
Dear Maintainer and Reader,
I couldn't get the modem in my Notebook "Acer Aspire 1692WLMi" working.
I found a lot of things recommended in different Mailing lists and blogs
but they did not solve my problem. I use alsa Ver. 1.0.10-1 with
kernel Version 2.6.14 with source from Debian "SID".
The current status is that two modules are loaded during boot,
snd-intel8x0 and snd-intel8x0m. When both modules are loaded
the sound doesn't works. Only when snd-intel8x0 is loaded alone the sound
works fine.
If I additionally load module snd-intel8x0m sound does not work anymore
and error messages in syslog are printed.
So I think the error messages are a buck in the snd-intel8x0m module.
There is no /proc/asound/Modem present when I load the snd-intel8x0m
module.
In the "Additional Information" Section I paste some debugging output.
Regards
Guido
======================================================================
----------------------------------------------------------------------
guido - 01-13-06 10:06
----------------------------------------------------------------------
What gives you the Information that this is a CXT30 Modem?
Or is ICH6 Modem controller and CXT30 the same?
My lspci says that is a ICH6 Modem:
lspci output:
...
0000:00:1e.2 Multimedia audio controller: Intel Corp.
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
0000:00:1e.3 Modem: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97
Modem Controller (rev 04)
...
----------------------------------------------------------------------
pzad - 01-13-06 10:15
----------------------------------------------------------------------
This:
Mixers: 0: Conexant id 30
This is Conexant AMC97 codec responsible for Analog audio and analog modem
part.
Your modem consists from two parts ICH6 (digital part - controler) and
MC97(in this case AMC97) codec (analog part). ICH6 modem is supported, but
Conexant codec modem part not.
Issue History
Date Modified Username Field Change
======================================================================
12-29-05 22:43 guido New Issue
12-29-05 22:43 guido Distribution => Debian "Sarge" with
kernel and alsa from "SID"
12-29-05 22:43 guido Kernel Version => 2.6.14
01-03-06 20:51 guido Issue Monitored: guido
01-07-06 01:56 sashak Note Added: 0007501
01-07-06 01:57 sashak File Added: ich-cxt30amc-test.patch
01-07-06 01:57 sashak Note Added: 0007502
01-12-06 23:39 guido File Added: syslog
01-12-06 23:40 guido Note Added: 0007593
01-12-06 23:43 guido Note Edited: 0007593
01-13-06 00:21 sashak Note Added: 0007601
01-13-06 10:06 guido Note Added: 0007636
01-13-06 10:15 pzad Note Added: 0007637
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0001694]: snd-intel8x0m unable to initialize the Modem device ICH6
@ 2006-01-14 22:48 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2006-01-14 22:48 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1694>
======================================================================
Reported By: guido
Assigned To: sashak
======================================================================
Project: ALSA - driver
Issue ID: 1694
Category: PCI - intel8x0m
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
Distribution: Debian "Sarge" with kernel and alsa from "SID"
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-29-2005 22:43 CET
Last Modified: 01-14-2006 23:48 CET
======================================================================
Summary: snd-intel8x0m unable to initialize the Modem device
ICH6
Description:
Dear Maintainer and Reader,
I couldn't get the modem in my Notebook "Acer Aspire 1692WLMi" working.
I found a lot of things recommended in different Mailing lists and blogs
but they did not solve my problem. I use alsa Ver. 1.0.10-1 with
kernel Version 2.6.14 with source from Debian "SID".
The current status is that two modules are loaded during boot,
snd-intel8x0 and snd-intel8x0m. When both modules are loaded
the sound doesn't works. Only when snd-intel8x0 is loaded alone the sound
works fine.
If I additionally load module snd-intel8x0m sound does not work anymore
and error messages in syslog are printed.
So I think the error messages are a buck in the snd-intel8x0m module.
There is no /proc/asound/Modem present when I load the snd-intel8x0m
module.
In the "Additional Information" Section I paste some debugging output.
Regards
Guido
======================================================================
----------------------------------------------------------------------
pzad - 01-13-06 10:15
----------------------------------------------------------------------
This:
Mixers: 0: Conexant id 30
This is Conexant AMC97 codec responsible for Analog audio and analog modem
part.
Your modem consists from two parts ICH6 (digital part - controler) and
MC97(in this case AMC97) codec (analog part). ICH6 modem is supported, but
Conexant codec modem part not.
----------------------------------------------------------------------
guido - 01-14-06 23:48
----------------------------------------------------------------------
So let's resume:
I can now load snd-intel8x0 and snd-intel8x0m at the same time and the
sound
output still is working.
I have a conexant modem chip and a intel ICH6 modem controller.
For the conexant modem chip I will need the hsf codecs from linuxant.
So is the snd-intel8x0m module for any use for my type of hardware
combination?
What can I do with this module?
Regards
Guido
Issue History
Date Modified Username Field Change
======================================================================
12-29-05 22:43 guido New Issue
12-29-05 22:43 guido Distribution => Debian "Sarge" with
kernel and alsa from "SID"
12-29-05 22:43 guido Kernel Version => 2.6.14
01-03-06 20:51 guido Issue Monitored: guido
01-07-06 01:56 sashak Note Added: 0007501
01-07-06 01:57 sashak File Added: ich-cxt30amc-test.patch
01-07-06 01:57 sashak Note Added: 0007502
01-12-06 23:39 guido File Added: syslog
01-12-06 23:40 guido Note Added: 0007593
01-12-06 23:43 guido Note Edited: 0007593
01-13-06 00:21 sashak Note Added: 0007601
01-13-06 10:06 guido Note Added: 0007636
01-13-06 10:15 pzad Note Added: 0007637
01-14-06 23:48 guido Note Added: 0007657
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0001694]: snd-intel8x0m unable to initialize the Modem device ICH6
@ 2006-01-15 12:57 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2006-01-15 12:57 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1694>
======================================================================
Reported By: guido
Assigned To: sashak
======================================================================
Project: ALSA - driver
Issue ID: 1694
Category: PCI - intel8x0m
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
Distribution: Debian "Sarge" with kernel and alsa from "SID"
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-29-2005 22:43 CET
Last Modified: 01-15-2006 13:57 CET
======================================================================
Summary: snd-intel8x0m unable to initialize the Modem device
ICH6
Description:
Dear Maintainer and Reader,
I couldn't get the modem in my Notebook "Acer Aspire 1692WLMi" working.
I found a lot of things recommended in different Mailing lists and blogs
but they did not solve my problem. I use alsa Ver. 1.0.10-1 with
kernel Version 2.6.14 with source from Debian "SID".
The current status is that two modules are loaded during boot,
snd-intel8x0 and snd-intel8x0m. When both modules are loaded
the sound doesn't works. Only when snd-intel8x0 is loaded alone the sound
works fine.
If I additionally load module snd-intel8x0m sound does not work anymore
and error messages in syslog are printed.
So I think the error messages are a buck in the snd-intel8x0m module.
There is no /proc/asound/Modem present when I load the snd-intel8x0m
module.
In the "Additional Information" Section I paste some debugging output.
Regards
Guido
======================================================================
----------------------------------------------------------------------
guido - 01-14-06 23:48
----------------------------------------------------------------------
So let's resume:
I can now load snd-intel8x0 and snd-intel8x0m at the same time and the
sound
output still is working.
I have a conexant modem chip and a intel ICH6 modem controller.
For the conexant modem chip I will need the hsf codecs from linuxant.
So is the snd-intel8x0m module for any use for my type of hardware
combination?
What can I do with this module?
Regards
Guido
----------------------------------------------------------------------
pzad - 01-15-06 13:57
----------------------------------------------------------------------
For you, snd-intel8x0m is not usable.
Yu can delete it, rename, ....
Issue History
Date Modified Username Field Change
======================================================================
12-29-05 22:43 guido New Issue
12-29-05 22:43 guido Distribution => Debian "Sarge" with
kernel and alsa from "SID"
12-29-05 22:43 guido Kernel Version => 2.6.14
01-03-06 20:51 guido Issue Monitored: guido
01-07-06 01:56 sashak Note Added: 0007501
01-07-06 01:57 sashak File Added: ich-cxt30amc-test.patch
01-07-06 01:57 sashak Note Added: 0007502
01-12-06 23:39 guido File Added: syslog
01-12-06 23:40 guido Note Added: 0007593
01-12-06 23:43 guido Note Edited: 0007593
01-13-06 00:21 sashak Note Added: 0007601
01-13-06 10:06 guido Note Added: 0007636
01-13-06 10:15 pzad Note Added: 0007637
01-14-06 23:48 guido Note Added: 0007657
01-15-06 13:57 pzad Note Added: 0007663
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0001694]: snd-intel8x0m unable to initialize the Modem device ICH6
@ 2006-01-15 20:29 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2006-01-15 20:29 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1694>
======================================================================
Reported By: guido
Assigned To: sashak
======================================================================
Project: ALSA - driver
Issue ID: 1694
Category: PCI - intel8x0m
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
Distribution: Debian "Sarge" with kernel and alsa from "SID"
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-29-2005 22:43 CET
Last Modified: 01-15-2006 21:29 CET
======================================================================
Summary: snd-intel8x0m unable to initialize the Modem device
ICH6
Description:
Dear Maintainer and Reader,
I couldn't get the modem in my Notebook "Acer Aspire 1692WLMi" working.
I found a lot of things recommended in different Mailing lists and blogs
but they did not solve my problem. I use alsa Ver. 1.0.10-1 with
kernel Version 2.6.14 with source from Debian "SID".
The current status is that two modules are loaded during boot,
snd-intel8x0 and snd-intel8x0m. When both modules are loaded
the sound doesn't works. Only when snd-intel8x0 is loaded alone the sound
works fine.
If I additionally load module snd-intel8x0m sound does not work anymore
and error messages in syslog are printed.
So I think the error messages are a buck in the snd-intel8x0m module.
There is no /proc/asound/Modem present when I load the snd-intel8x0m
module.
In the "Additional Information" Section I paste some debugging output.
Regards
Guido
======================================================================
----------------------------------------------------------------------
pzad - 01-15-06 13:57
----------------------------------------------------------------------
For you, snd-intel8x0m is not usable.
You can delete it, rename, ....
----------------------------------------------------------------------
sashak - 01-15-06 21:29
----------------------------------------------------------------------
> You can delete it, rename, ....
Yes, or to investigate how it works and extend driver to support this hw,
but this will not be easy task.
Issue History
Date Modified Username Field Change
======================================================================
12-29-05 22:43 guido New Issue
12-29-05 22:43 guido Distribution => Debian "Sarge" with
kernel and alsa from "SID"
12-29-05 22:43 guido Kernel Version => 2.6.14
01-03-06 20:51 guido Issue Monitored: guido
01-07-06 01:56 sashak Note Added: 0007501
01-07-06 01:57 sashak File Added: ich-cxt30amc-test.patch
01-07-06 01:57 sashak Note Added: 0007502
01-12-06 23:39 guido File Added: syslog
01-12-06 23:40 guido Note Added: 0007593
01-12-06 23:43 guido Note Edited: 0007593
01-13-06 00:21 sashak Note Added: 0007601
01-13-06 10:06 guido Note Added: 0007636
01-13-06 10:15 pzad Note Added: 0007637
01-14-06 23:48 guido Note Added: 0007657
01-15-06 13:57 pzad Note Added: 0007663
01-15-06 13:57 pzad Note Edited: 0007663
01-15-06 21:29 sashak Note Added: 0007671
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ALSA - driver 0001694]: snd-intel8x0m unable to initialize the Modem device ICH6
@ 2006-01-16 9:51 bugtrack
0 siblings, 0 replies; 11+ messages in thread
From: bugtrack @ 2006-01-16 9:51 UTC (permalink / raw)
To: alsa-devel
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1694>
======================================================================
Reported By: guido
Assigned To: sashak
======================================================================
Project: ALSA - driver
Issue ID: 1694
Category: PCI - intel8x0m
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
Distribution: Debian "Sarge" with kernel and alsa from "SID"
Kernel Version: 2.6.14
======================================================================
Date Submitted: 12-29-2005 22:43 CET
Last Modified: 01-16-2006 10:51 CET
======================================================================
Summary: snd-intel8x0m unable to initialize the Modem device
ICH6
Description:
Dear Maintainer and Reader,
I couldn't get the modem in my Notebook "Acer Aspire 1692WLMi" working.
I found a lot of things recommended in different Mailing lists and blogs
but they did not solve my problem. I use alsa Ver. 1.0.10-1 with
kernel Version 2.6.14 with source from Debian "SID".
The current status is that two modules are loaded during boot,
snd-intel8x0 and snd-intel8x0m. When both modules are loaded
the sound doesn't works. Only when snd-intel8x0 is loaded alone the sound
works fine.
If I additionally load module snd-intel8x0m sound does not work anymore
and error messages in syslog are printed.
So I think the error messages are a buck in the snd-intel8x0m module.
There is no /proc/asound/Modem present when I load the snd-intel8x0m
module.
In the "Additional Information" Section I paste some debugging output.
Regards
Guido
======================================================================
----------------------------------------------------------------------
sashak - 01-15-06 21:29
----------------------------------------------------------------------
> You can delete it, rename, ....
Yes, or to investigate how it works and extend driver to support this hw,
but this will not be easy task.
----------------------------------------------------------------------
guido - 01-16-06 10:51
----------------------------------------------------------------------
Thank You for Your help!
Guido
Issue History
Date Modified Username Field Change
======================================================================
12-29-05 22:43 guido New Issue
12-29-05 22:43 guido Distribution => Debian "Sarge" with
kernel and alsa from "SID"
12-29-05 22:43 guido Kernel Version => 2.6.14
01-03-06 20:51 guido Issue Monitored: guido
01-07-06 01:56 sashak Note Added: 0007501
01-07-06 01:57 sashak File Added: ich-cxt30amc-test.patch
01-07-06 01:57 sashak Note Added: 0007502
01-12-06 23:39 guido File Added: syslog
01-12-06 23:40 guido Note Added: 0007593
01-12-06 23:43 guido Note Edited: 0007593
01-13-06 00:21 sashak Note Added: 0007601
01-13-06 10:06 guido Note Added: 0007636
01-13-06 10:15 pzad Note Added: 0007637
01-14-06 23:48 guido Note Added: 0007657
01-15-06 13:57 pzad Note Added: 0007663
01-15-06 13:57 pzad Note Edited: 0007663
01-15-06 21:29 sashak Note Added: 0007671
01-16-06 10:51 guido Note Added: 0007684
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2006-01-16 9:51 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-01-15 20:29 [ALSA - driver 0001694]: snd-intel8x0m unable to initialize the Modem device ICH6 bugtrack
-- strict thread matches above, loose matches on Subject: below --
2006-01-16 9:51 bugtrack
2006-01-15 12:57 bugtrack
2006-01-14 22:48 bugtrack
2006-01-13 9:15 bugtrack
2006-01-13 9:06 bugtrack
2006-01-12 23:21 bugtrack
2006-01-12 22:40 bugtrack
2006-01-07 0:57 bugtrack
2006-01-07 0:56 bugtrack
2005-12-29 21:43 bugtrack
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox