From: Takashi Iwai <tiwai@suse.de>
To: "Tais M. Hansen" <tais.hansen@osd.dk>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: Re: [Alsa-user] Upgrade problems -addendum
Date: Mon, 27 Jan 2003 16:15:45 +0100 [thread overview]
Message-ID: <s5h3cneoc7y.wl@alsa2.suse.de> (raw)
In-Reply-To: <200301271542.48663.tais.hansen@osd.dk>
[-- Attachment #1: Type: text/plain, Size: 891 bytes --]
At Mon, 27 Jan 2003 15:42:43 +0100,
Tais M. Hansen <tais.hansen@osd.dk> wrote:
>
> [1 <text/plain; iso-8859-1 (quoted-printable)>]
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On Monday 27 January 2003 11:42, Takashi Iwai wrote:
> > > I just gave it another try with aplay. Bad idea; froze the system.
> > > Something's really wrong with the test8-patch.
> > ok. now, i rewrote the patch completely again.
> > the module options was removed again.
> > here we go...
>
> Ok. Hope you had a great weekend. :)
>
> - - Fresh cvs update. Recompiled & installed alsa-lib and alsa-util.
> - - POINTER_DEBUG enabled.
>
> No sound from aplay but it had a lot of complaints for me. Two files attached.
ok, the patch was buggy.
but any sounds must come out. please check your mixer configuration.
the fixed patch below: same as test9 but more verbose with POINTER_DEBUG.
Takashi
[-- Attachment #2: via-pointer-test10.dif --]
[-- Type: application/octet-stream, Size: 10515 bytes --]
Index: alsa-kernel/pci/via82xx.c
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-kernel/pci/via82xx.c,v
retrieving revision 1.21
diff -u -r1.21 via82xx.c
--- alsa-kernel/pci/via82xx.c 22 Jan 2003 14:21:05 -0000 1.21
+++ alsa-kernel/pci/via82xx.c 27 Jan 2003 15:12:46 -0000
@@ -88,7 +88,7 @@
MODULE_PARM(mpu_port, "1-" __MODULE_STRING(SNDRV_CARDS) "l");
MODULE_PARM_DESC(mpu_port, "MPU-401 port.");
MODULE_PARM_SYNTAX(mpu_port, SNDRV_PORT_DESC);
-MODULE_PARM(ac97_clock, "1-" __MODULE_STRING(SNDRV_CARDS) "l");
+MODULE_PARM(ac97_clock, "1-" __MODULE_STRING(SNDRV_CARDS) "i");
MODULE_PARM_DESC(ac97_clock, "AC'97 codec clock (default 48000Hz).");
MODULE_PARM_SYNTAX(ac97_clock, SNDRV_ENABLED ",default:48000");
@@ -230,10 +230,13 @@
u32 *table; /* physical address + flag */
dma_addr_t table_addr;
struct snd_via_sg_table *idx_table;
+ int *period_idx;
+ unsigned int periods;
/* for recovery from the unexpected pointer */
+ unsigned int intr_cnt;
unsigned int lastpos;
+ unsigned int lastidx;
unsigned int bufsize;
- unsigned int bufsize2;
};
@@ -262,11 +265,17 @@
if (! dev->idx_table)
return -ENOMEM;
}
+ if (! dev->period_idx) {
+ dev->period_idx = kmalloc(sizeof(int) * VIA_TABLE_SIZE, GFP_KERNEL);
+ if (! dev->period_idx)
+ return -ENOMEM;
+ }
/* fill the entries */
idx = 0;
ofs = 0;
for (i = 0; i < periods; i++) {
+ dev->period_idx[i] = idx;
rest = fragsize;
/* fill descriptors for a period.
* a period can be split to several descriptors if it's
@@ -302,7 +311,7 @@
}
dev->tbl_entries = idx;
dev->bufsize = periods * fragsize;
- dev->bufsize2 = dev->bufsize / 2;
+ dev->periods = periods;
return 0;
}
@@ -318,13 +327,18 @@
kfree(dev->idx_table);
dev->idx_table = NULL;
}
+ if (dev->period_idx) {
+ kfree(dev->period_idx);
+ dev->period_idx = NULL;
+ }
}
/*
*/
-enum { TYPE_VIA686 = 1, TYPE_VIA8233 };
+enum { TYPE_CARD_VIA686 = 1, TYPE_CARD_VIA8233 };
+enum { TYPE_VIA686, TYPE_VIA8233, TYPE_VIA8233A };
#define VIA_MAX_DEVS 7 /* 4 playback, 1 multi, 2 capture */
@@ -365,8 +379,8 @@
};
static struct pci_device_id snd_via82xx_ids[] __devinitdata = {
- { 0x1106, 0x3058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_VIA686, }, /* 686A */
- { 0x1106, 0x3059, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_VIA8233, }, /* VT8233 */
+ { 0x1106, 0x3058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA686, }, /* 686A */
+ { 0x1106, 0x3059, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA8233, }, /* VT8233 */
{ 0, }
};
@@ -481,10 +495,13 @@
/* disable interrupts */
outb(0x00, port + VIA_REG_OFFSET_CONTROL);
/* clear interrupts */
- outb(0x03, port + VIA_REG_OFFSET_STATUS);
- outb(0x00, port + VIA_REG_OFFSET_TYPE); /* for via686 */
+ outb(0x07, port + VIA_REG_OFFSET_STATUS);
+ if (chip->chip_type == TYPE_VIA686)
+ outb(0x00, port + VIA_REG_OFFSET_TYPE);
outl(0, port + VIA_REG_OFFSET_CURR_PTR);
viadev->lastpos = 0;
+ viadev->lastidx = 0;
+ viadev->intr_cnt = 0;
}
@@ -512,10 +529,20 @@
/* check status for each stream */
for (i = 0; i < chip->num_devs; i++) {
viadev_t *viadev = &chip->devs[i];
- if (inb(chip->port + viadev->reg_offset) & (VIA_REG_STAT_EOL|VIA_REG_STAT_FLAG)) {
- outb(VIA_REG_STAT_FLAG | VIA_REG_STAT_EOL, VIAREG(chip, OFFSET_STATUS) + viadev->reg_offset);
+ unsigned long port = chip->port + viadev->reg_offset; /* STATUS */
+ unsigned char status = inb(port) & 0x07;
+ if (! status)
+ continue;
+ outb(status, port); /* ack */
+ if (status & (VIA_REG_STAT_EOL|VIA_REG_STAT_FLAG)) {
if (viadev->substream && viadev->running) {
+ viadev->intr_cnt++;
+ if (viadev->intr_cnt >= viadev->periods)
+ viadev->intr_cnt = 0;
spin_unlock(&chip->reg_lock);
+#ifdef POINTER_DEBUG
+ snd_printd("period elapsed\n");
+#endif
snd_pcm_period_elapsed(viadev->substream);
spin_lock(&chip->reg_lock);
}
@@ -538,7 +565,7 @@
unsigned char val;
unsigned long port = chip->port + viadev->reg_offset;
- if (chip->chip_type == TYPE_VIA8233)
+ if (chip->chip_type != TYPE_VIA686)
val = VIA_REG_CTRL_INT;
else
val = 0;
@@ -573,35 +600,76 @@
*/
/*
+ * check whether the given index is within the current area
+ */
+static inline int out_of_intr_idx(viadev_t *viadev, unsigned int idx)
+{
+ unsigned int cnt;
+
+ if (idx < viadev->period_idx[viadev->intr_cnt])
+ return 1;
+ cnt = viadev->intr_cnt + 1;
+ if (cnt != viadev->periods && idx >= viadev->period_idx[cnt])
+ return 1;
+ return 0;
+}
+
+/*
* calculate the linear position at the given sg-buffer index and the rest count
*/
-static inline unsigned int calc_linear_pos(viadev_t *viadev, unsigned int idx, unsigned int count)
+static unsigned int calc_linear_pos(viadev_t *viadev, unsigned int idx, unsigned int count)
{
unsigned int size, res;
size = viadev->idx_table[idx].size;
res = viadev->idx_table[idx].offset + size - count;
-
- /* check the validity of the calculated position */
- if (size < count || (res < viadev->lastpos && (res >= viadev->bufsize2 || viadev->lastpos < viadev->bufsize2))) {
#ifdef POINTER_DEBUG
- printk("fail: idx = %i/%i, lastpos = 0x%x, bufsize2 = 0x%x, offsize = 0x%x, size = 0x%x, count = 0x%x\n", idx, viadev->tbl_entries, viadev->lastpos, viadev->bufsize2, viadev->idx_table[idx].offset, viadev->idx_table[idx].size, count);
+ snd_printd("calc_linear_pos: idx = %i/%i, ptr = 0x%x, lastpos = 0x%x, size = 0x%x, count = 0x%x\n", idx, viadev->tbl_entries, res, viadev->lastpos, size, count);
#endif
- /* count register returns full size when end of buffer is reached */
- if (size != count) {
- snd_printd(KERN_ERR "invalid via82xx_cur_ptr, using last valid pointer\n");
- res = viadev->lastpos;
- } else {
- res = viadev->idx_table[idx].offset + size;
- if (res < viadev->lastpos && (res >= viadev->bufsize2 || viadev->lastpos < viadev->bufsize2)) {
- snd_printd(KERN_ERR "invalid via82xx_cur_ptr (2), using last valid pointer\n");
- res = viadev->lastpos;
+ if (count == 0) {
+ /* fully processed, increase the index */
+ if (++idx >= viadev->tbl_entries)
+ idx = 0;
+ }
+
+ if (out_of_intr_idx(viadev, idx)) {
+ if (size == count) {
+ /* count register returns full size when end of buffer is reached */
+ if (++idx >= viadev->tbl_entries)
+ idx = 0;
+ if (! out_of_intr_idx(viadev, idx)) {
+ res = viadev->idx_table[idx].offset;
+ goto _ok;
}
}
+ if (! out_of_intr_idx(viadev, viadev->lastidx)) {
+#ifdef POINTER_DEBUG
+ snd_printd("recover from last\n");
+#endif
+ return viadev->lastpos;
+ }
+ /* recover from the interrupt pointer */
+ idx = viadev->period_idx[viadev->intr_cnt];
+ res = viadev->idx_table[idx].offset;
+#ifdef POINTER_DEBUG
+ snd_printd("recover from intr: idx = %i, ptr = 0x%x\n", idx, res);
+#endif
+ } else if (res < viadev->lastpos) {
+ if (! out_of_intr_idx(viadev, viadev->lastidx)) {
+#ifdef POINTER_DEBUG
+ snd_printd("recover from last #2\n");
+#endif
+ return viadev->lastpos;
+ }
}
- viadev->lastpos = res; /* remember the last positiion */
+ _ok:
if (res >= viadev->bufsize)
res -= viadev->bufsize;
+ viadev->lastidx = idx;
+ viadev->lastpos = res;
+#ifdef POINTER_DEBUG
+ snd_printd("get position: 0x%x, idx = %d\n", res, idx);
+#endif
return res;
}
@@ -648,7 +716,7 @@
return 0;
spin_lock(&chip->reg_lock);
count = inl(VIAREG(chip, OFFSET_CURR_COUNT) + viadev->reg_offset);
- idx = count >> 24;
+ idx = (count >> 24) & viadev->tbl_entries;
count &= 0xffffff;
res = calc_linear_pos(viadev, idx, count);
spin_unlock(&chip->reg_lock);
@@ -950,7 +1018,7 @@
if ((err = snd_via82xx_pcm_open(chip, viadev, substream)) < 0)
return err;
substream->runtime->hw.channels_max = 6;
- if (chip->revision == VIA_REV_8233A)
+ if (chip->chip_type == TYPE_VIA8233A)
snd_pcm_hw_constraint_list(substream->runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, &hw_constraints_channels);
return 0;
}
@@ -1365,7 +1433,7 @@
int i, err, caps;
unsigned char val;
- caps = chip->revision == VIA_REV_8233A ? 1 : 2;
+ caps = chip->chip_type == TYPE_VIA8233A ? 1 : 2;
for (i = 0; i < caps; i++) {
snd_via8233_capture_source.index = i;
err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_via8233_capture_source, chip));
@@ -1651,6 +1719,19 @@
return 0;
}
+struct via823x_info {
+ int revision;
+ char *name;
+ int type;
+};
+static struct via823x_info via823x_cards[] __devinitdata = {
+ { VIA_REV_PRE_8233, "VIA 8233-Pre", TYPE_VIA8233 },
+ { VIA_REV_8233C, "VIA 8233C", TYPE_VIA8233 },
+ { VIA_REV_8233, "VIA 8233", TYPE_VIA8233 },
+ { VIA_REV_8233A, "VIA 8233A", TYPE_VIA8233A },
+ { VIA_REV_8233, "VIA 8235", TYPE_VIA8233 },
+};
+
static int __devinit snd_via82xx_probe(struct pci_dev *pci,
const struct pci_device_id *pci_id)
{
@@ -1658,7 +1739,7 @@
snd_card_t *card;
via82xx_t *chip;
unsigned char revision;
- int chip_type;
+ int chip_type = 0, card_type;
int i, err;
if (dev >= SNDRV_CARDS)
@@ -1672,24 +1753,31 @@
if (card == NULL)
return -ENOMEM;
- chip_type = pci_id->driver_data;
+ card_type = pci_id->driver_data;
pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
- switch (chip_type) {
- case TYPE_VIA686:
+ switch (card_type) {
+ case TYPE_CARD_VIA686:
strcpy(card->driver, "VIA686A");
strcpy(card->shortname, "VIA 82C686A/B");
+ chip_type = TYPE_VIA686;
break;
- case TYPE_VIA8233:
- if (revision == VIA_REV_8233A) {
+ case TYPE_CARD_VIA8233:
+ chip_type = TYPE_VIA8233;
+ sprintf(card->shortname, "VIA 823x rev%d", revision);
+ for (i = 0; i < ARRAY_SIZE(via823x_cards); i++) {
+ if (revision == via823x_cards[i].revision) {
+ chip_type = via823x_cards[i].type;
+ strcpy(card->shortname, via823x_cards[i].name);
+ break;
+ }
+ }
+ if (chip_type == VIA_REV_8233A)
strcpy(card->driver, "VIA8233A");
- strcpy(card->shortname, "VIA 8233A");
- } else {
+ else
strcpy(card->driver, "VIA8233");
- strcpy(card->shortname, "VIA 8233/C");
- }
break;
default:
- snd_printk(KERN_ERR "invalid chip type %d\n", chip_type);
+ snd_printk(KERN_ERR "invalid card type %d\n", card_type);
err = -EINVAL;
goto __error;
}
@@ -1705,7 +1793,7 @@
(err = snd_via686_init_misc(chip, dev)) < 0)
goto __error;
} else {
- if (revision == VIA_REV_8233A) {
+ if (chip_type == VIA_REV_8233A) {
if ((err = snd_via8233a_pcm_new(chip)) < 0)
goto __error;
} else {
@@ -1792,4 +1880,3 @@
__setup("snd-via82xx=", alsa_card_via82xx_setup);
#endif /* ifndef MODULE */
-
next prev parent reply other threads:[~2003-01-27 15:15 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200301221234.33054.tais.hansen@osd.dk>
[not found] ` <200301221543.52285.tais.hansen@osd.dk>
[not found] ` <s5hznpt1bn2.wl@alsa2.suse.de>
[not found] ` <200301221647.05780.tais.hansen@osd.dk>
2003-01-22 16:23 ` [Alsa-user] Upgrade problems -addendum Takashi Iwai
2003-01-23 0:35 ` Tais M. Hansen
2003-01-23 10:03 ` Takashi Iwai
2003-01-23 11:15 ` Tais M. Hansen
2003-01-23 11:46 ` Takashi Iwai
2003-01-23 12:36 ` Tais M. Hansen
2003-01-23 15:08 ` Takashi Iwai
2003-01-23 17:50 ` Tais M. Hansen
2003-01-23 18:07 ` Takashi Iwai
2003-01-23 18:43 ` Tais M. Hansen
2003-01-24 9:12 ` Takashi Iwai
2003-01-24 12:41 ` Tais M. Hansen
2003-01-24 13:30 ` Takashi Iwai
2003-01-24 14:12 ` Tais M. Hansen
2003-01-24 15:45 ` Takashi Iwai
2003-01-24 16:40 ` Tais M. Hansen
2003-01-24 17:08 ` Takashi Iwai
2003-01-24 21:24 ` Tais M. Hansen
2003-01-27 10:42 ` Takashi Iwai
2003-01-27 14:42 ` Tais M. Hansen
2003-01-27 15:15 ` Takashi Iwai [this message]
2003-01-27 17:01 ` Tais M. Hansen
2003-01-27 17:27 ` Takashi Iwai
2003-01-28 0:43 ` VIA823x testing Tais M. Hansen
2003-01-28 9:31 ` Takashi Iwai
2003-01-28 13:25 ` Tais M. Hansen
2003-01-28 16:21 ` Takashi Iwai
2003-01-28 23:19 ` Tais M. Hansen
2003-01-24 16:42 ` Re: [Alsa-user] Upgrade problems -addendum Tais M. Hansen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h3cneoc7y.wl@alsa2.suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@lists.sourceforge.net \
--cc=tais.hansen@osd.dk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox