Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: "Tais M. Hansen" <tais.hansen@osd.dk>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: Re: [Alsa-user] Upgrade problems -addendum
Date: Mon, 27 Jan 2003 11:42:49 +0100	[thread overview]
Message-ID: <s5hn0lmoouu.wl@alsa2.suse.de> (raw)
In-Reply-To: <200301242224.47436.tais.hansen@osd.dk>

[-- Attachment #1: Type: text/plain, Size: 487 bytes --]

At Fri, 24 Jan 2003 22:24:43 +0100,
Tais M. Hansen <tais.hansen@osd.dk> wrote:
> 
> > > > now comes the patch of the week:
> > > > idx_detect=1 : like test7.  perhaps not perfect.
> > > No sound, so you're right.
> > hmm, it should produce some sounds.
> 
> I just gave it another try with aplay. Bad idea; froze the system. Something's 
> really wrong with the test8-patch.

ok.  now, i rewrote the patch completely again.
the module options was removed again.

here we go...


Takashi

[-- Attachment #2: via-pointer-test9.dif --]
[-- Type: application/octet-stream, Size: 10668 bytes --]

Index: alsa-kernel/pci/via82xx.c
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-kernel/pci/via82xx.c,v
retrieving revision 1.21
diff -u -r1.21 via82xx.c
--- alsa-kernel/pci/via82xx.c	22 Jan 2003 14:21:05 -0000	1.21
+++ alsa-kernel/pci/via82xx.c	27 Jan 2003 10:38:59 -0000
@@ -88,7 +88,7 @@
 MODULE_PARM(mpu_port, "1-" __MODULE_STRING(SNDRV_CARDS) "l");
 MODULE_PARM_DESC(mpu_port, "MPU-401 port.");
 MODULE_PARM_SYNTAX(mpu_port, SNDRV_PORT_DESC);
-MODULE_PARM(ac97_clock, "1-" __MODULE_STRING(SNDRV_CARDS) "l");
+MODULE_PARM(ac97_clock, "1-" __MODULE_STRING(SNDRV_CARDS) "i");
 MODULE_PARM_DESC(ac97_clock, "AC'97 codec clock (default 48000Hz).");
 MODULE_PARM_SYNTAX(ac97_clock, SNDRV_ENABLED ",default:48000");
 
@@ -230,10 +230,13 @@
 	u32 *table; /* physical address + flag */
 	dma_addr_t table_addr;
 	struct snd_via_sg_table *idx_table;
+	int *period_idx;
+	unsigned int periods;
 	/* for recovery from the unexpected pointer */
+	unsigned int intr_cnt;
 	unsigned int lastpos;
+	unsigned int lastidx;
 	unsigned int bufsize;
-	unsigned int bufsize2;
 };
 
 
@@ -262,11 +265,17 @@
 		if (! dev->idx_table)
 			return -ENOMEM;
 	}
+	if (! dev->period_idx) {
+		dev->period_idx = kmalloc(sizeof(int) * VIA_TABLE_SIZE, GFP_KERNEL);
+		if (! dev->period_idx)
+			return -ENOMEM;
+	}
 
 	/* fill the entries */
 	idx = 0;
 	ofs = 0;
 	for (i = 0; i < periods; i++) {
+		dev->period_idx[i] = idx;
 		rest = fragsize;
 		/* fill descriptors for a period.
 		 * a period can be split to several descriptors if it's
@@ -302,7 +311,7 @@
 	}
 	dev->tbl_entries = idx;
 	dev->bufsize = periods * fragsize;
-	dev->bufsize2 = dev->bufsize / 2;
+	dev->periods = periods;
 	return 0;
 }
 
@@ -318,13 +327,18 @@
 		kfree(dev->idx_table);
 		dev->idx_table = NULL;
 	}
+	if (dev->period_idx) {
+		kfree(dev->period_idx);
+		dev->period_idx = NULL;
+	}
 }
 
 
 /*
  */
 
-enum { TYPE_VIA686 = 1, TYPE_VIA8233 };
+enum { TYPE_CARD_VIA686 = 1, TYPE_CARD_VIA8233 };
+enum { TYPE_VIA686, TYPE_VIA8233, TYPE_VIA8233A };
 
 #define VIA_MAX_DEVS	7	/* 4 playback, 1 multi, 2 capture */
 
@@ -365,8 +379,8 @@
 };
 
 static struct pci_device_id snd_via82xx_ids[] __devinitdata = {
-	{ 0x1106, 0x3058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_VIA686, },	/* 686A */
-	{ 0x1106, 0x3059, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_VIA8233, },	/* VT8233 */
+	{ 0x1106, 0x3058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA686, },	/* 686A */
+	{ 0x1106, 0x3059, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA8233, },	/* VT8233 */
 	{ 0, }
 };
 
@@ -481,10 +495,13 @@
 	/* disable interrupts */
 	outb(0x00, port + VIA_REG_OFFSET_CONTROL);
 	/* clear interrupts */
-	outb(0x03, port + VIA_REG_OFFSET_STATUS);
-	outb(0x00, port + VIA_REG_OFFSET_TYPE); /* for via686 */
+	outb(0x07, port + VIA_REG_OFFSET_STATUS);
+	if (chip->chip_type == TYPE_VIA686)
+		outb(0x00, port + VIA_REG_OFFSET_TYPE);
 	outl(0, port + VIA_REG_OFFSET_CURR_PTR);
 	viadev->lastpos = 0;
+	viadev->lastidx = 0;
+	viadev->intr_cnt = 0;
 }
 
 
@@ -512,10 +529,20 @@
 	/* check status for each stream */
 	for (i = 0; i < chip->num_devs; i++) {
 		viadev_t *viadev = &chip->devs[i];
-		if (inb(chip->port + viadev->reg_offset) & (VIA_REG_STAT_EOL|VIA_REG_STAT_FLAG)) {
-			outb(VIA_REG_STAT_FLAG | VIA_REG_STAT_EOL, VIAREG(chip, OFFSET_STATUS) + viadev->reg_offset);
+		unsigned long port = chip->port + viadev->reg_offset; /* STATUS */
+		unsigned char status = inb(port) & 0x07;
+		if (! status)
+			continue;
+		outb(status, port); /* ack */
+		if (status & (VIA_REG_STAT_EOL|VIA_REG_STAT_FLAG)) {
 			if (viadev->substream && viadev->running) {
+				viadev->intr_cnt++;
+				if (viadev->intr_cnt >= viadev->periods)
+					viadev->intr_cnt = 0;
 				spin_unlock(&chip->reg_lock);
+#ifdef POINTER_DEBUG
+				snd_printd("period elapsed\n");
+#endif
 				snd_pcm_period_elapsed(viadev->substream);
 				spin_lock(&chip->reg_lock);
 			}
@@ -538,7 +565,7 @@
 	unsigned char val;
 	unsigned long port = chip->port + viadev->reg_offset;
 
-	if (chip->chip_type == TYPE_VIA8233)
+	if (chip->chip_type != TYPE_VIA686)
 		val = VIA_REG_CTRL_INT;
 	else
 		val = 0;
@@ -572,36 +599,70 @@
  * pointer callbacks
  */
 
+static inline int out_of_intr_idx(viadev_t *viadev, unsigned int idx)
+{
+	unsigned int cnt;
+
+	if (idx < viadev->period_idx[viadev->period_idx[viadev->intr_cnt]])
+		return 1;
+	cnt = viadev->intr_cnt + 1;
+	if (cnt != viadev->periods &&
+	    idx >= viadev->period_idx[viadev->period_idx[cnt]])
+		return 1;
+	return 0;
+}
+
 /*
  * calculate the linear position at the given sg-buffer index and the rest count
  */
-static inline unsigned int calc_linear_pos(viadev_t *viadev, unsigned int idx, unsigned int count)
+static unsigned int calc_linear_pos(viadev_t *viadev, unsigned int idx, unsigned int count)
 {
 	unsigned int size, res;
 
 	size = viadev->idx_table[idx].size;
 	res = viadev->idx_table[idx].offset + size - count;
+	if (count == 0) {
+		if (++idx >= viadev->tbl_entries)
+			idx = 0;
+	}
 
-	/* check the validity of the calculated position */
-	if (size < count || (res < viadev->lastpos && (res >= viadev->bufsize2 || viadev->lastpos < viadev->bufsize2))) {
+	if (out_of_intr_idx(viadev, idx)) {
+		if (size == count) {
+			/* count register returns full size when end of buffer is reached */
+			if (++idx >= viadev->tbl_entries)
+				idx = 0;
+			if (! out_of_intr_idx(viadev, idx)) {
+				res = viadev->idx_table[idx].offset;
+				goto _ok;
+			}
+		}
+		if (! out_of_intr_idx(viadev, viadev->lastidx)) {
 #ifdef POINTER_DEBUG
-		printk("fail: idx = %i/%i, lastpos = 0x%x, bufsize2 = 0x%x, offsize = 0x%x, size = 0x%x, count = 0x%x\n", idx, viadev->tbl_entries, viadev->lastpos, viadev->bufsize2, viadev->idx_table[idx].offset, viadev->idx_table[idx].size, count);
+			snd_printd("recover from last: idx = %i/%i, lastpos = 0x%x, size = 0x%x, count = 0x%x\n", idx, viadev->tbl_entries, viadev->lastpos, size, count);
 #endif
-		/* count register returns full size when end of buffer is reached */
-		if (size != count) {
-			snd_printd(KERN_ERR "invalid via82xx_cur_ptr, using last valid pointer\n");
-			res = viadev->lastpos;
-		} else {
-			res = viadev->idx_table[idx].offset + size;
-			if (res < viadev->lastpos && (res >= viadev->bufsize2 || viadev->lastpos < viadev->bufsize2)) {
-				snd_printd(KERN_ERR "invalid via82xx_cur_ptr (2), using last valid pointer\n");
-				res = viadev->lastpos;
+			return viadev->lastpos;
+		}
+#ifdef POINTER_DEBUG
+		snd_printd("recover from intr: idx = %i/%i, lastpos = 0x%x, intr_idx = %i\n", idx, viadev->tbl_entries, viadev->lastpos, viadev->period_idx[viadev->intr_cnt]);
+#endif
+		/* recover from the interrupt pointer */
+		idx = viadev->period_idx[viadev->intr_cnt];
+		res = viadev->idx_table[idx].offset;
+	} else {
+		if (res < viadev->lastpos) {
+			if (! out_of_intr_idx(viadev, viadev->lastidx)) {
+#ifdef POINTER_DEBUG
+			snd_printd("recover from last #2: idx = %i/%i, curpos = 0x%x, lastpos = 0x%x, size = 0x%x, count = 0x%x\n", idx, viadev->tbl_entries, res, viadev->lastpos, size, count);
+#endif
+				return viadev->lastpos;
 			}
 		}
 	}
-	viadev->lastpos = res; /* remember the last positiion */
+ _ok:
 	if (res >= viadev->bufsize)
 		res -= viadev->bufsize;
+	viadev->lastidx = idx;
+	viadev->lastpos = res;
 	return res;
 }
 
@@ -646,9 +707,10 @@
 	snd_assert(viadev->tbl_entries, return 0);
 	if (!(inb(VIAREG(chip, OFFSET_STATUS) + viadev->reg_offset) & VIA_REG_STAT_ACTIVE))
 		return 0;
+
 	spin_lock(&chip->reg_lock);
 	count = inl(VIAREG(chip, OFFSET_CURR_COUNT) + viadev->reg_offset);
-	idx = count >> 24;
+	idx = (count >> 24) & viadev->tbl_entries;
 	count &= 0xffffff;
 	res = calc_linear_pos(viadev, idx, count);
 	spin_unlock(&chip->reg_lock);
@@ -950,7 +1012,7 @@
 	if ((err = snd_via82xx_pcm_open(chip, viadev, substream)) < 0)
 		return err;
 	substream->runtime->hw.channels_max = 6;
-	if (chip->revision == VIA_REV_8233A)
+	if (chip->chip_type == TYPE_VIA8233A)
 		snd_pcm_hw_constraint_list(substream->runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, &hw_constraints_channels);
 	return 0;
 }
@@ -1365,7 +1427,7 @@
 	int i, err, caps;
 	unsigned char val;
 
-	caps = chip->revision == VIA_REV_8233A ? 1 : 2;
+	caps = chip->chip_type == TYPE_VIA8233A ? 1 : 2;
 	for (i = 0; i < caps; i++) {
 		snd_via8233_capture_source.index = i;
 		err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_via8233_capture_source, chip));
@@ -1651,6 +1713,19 @@
 	return 0;
 }
 
+struct via823x_info {
+	int revision;
+	char *name;
+	int type;
+};
+static struct via823x_info via823x_cards[] __devinitdata = {
+	{ VIA_REV_PRE_8233, "VIA 8233-Pre", TYPE_VIA8233 },
+	{ VIA_REV_8233C, "VIA 8233C", TYPE_VIA8233 },
+	{ VIA_REV_8233, "VIA 8233", TYPE_VIA8233 },
+	{ VIA_REV_8233A, "VIA 8233A", TYPE_VIA8233A },
+	{ VIA_REV_8233, "VIA 8235", TYPE_VIA8233 },
+};
+
 static int __devinit snd_via82xx_probe(struct pci_dev *pci,
 				       const struct pci_device_id *pci_id)
 {
@@ -1658,7 +1733,7 @@
 	snd_card_t *card;
 	via82xx_t *chip;
 	unsigned char revision;
-	int chip_type;
+	int chip_type = 0, card_type;
 	int i, err;
 
 	if (dev >= SNDRV_CARDS)
@@ -1672,24 +1747,31 @@
 	if (card == NULL)
 		return -ENOMEM;
 
-	chip_type = pci_id->driver_data;
+	card_type = pci_id->driver_data;
 	pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
-	switch (chip_type) {
-	case TYPE_VIA686:
+	switch (card_type) {
+	case TYPE_CARD_VIA686:
 		strcpy(card->driver, "VIA686A");
 		strcpy(card->shortname, "VIA 82C686A/B");
+		chip_type = TYPE_VIA686;
 		break;
-	case TYPE_VIA8233:
-		if (revision == VIA_REV_8233A) {
+	case TYPE_CARD_VIA8233:
+		chip_type = TYPE_VIA8233;
+		sprintf(card->shortname, "VIA 823x rev%d", revision);
+		for (i = 0; i < ARRAY_SIZE(via823x_cards); i++) {
+			if (revision == via823x_cards[i].revision) {
+				chip_type = via823x_cards[i].type;
+				strcpy(card->shortname, via823x_cards[i].name);
+				break;
+			}
+		}
+		if (chip_type == VIA_REV_8233A)
 			strcpy(card->driver, "VIA8233A");
-			strcpy(card->shortname, "VIA 8233A");
-		} else {
+		else
 			strcpy(card->driver, "VIA8233");
-			strcpy(card->shortname, "VIA 8233/C");
-		}
 		break;
 	default:
-		snd_printk(KERN_ERR "invalid chip type %d\n", chip_type);
+		snd_printk(KERN_ERR "invalid card type %d\n", card_type);
 		err = -EINVAL;
 		goto __error;
 	}
@@ -1705,7 +1787,7 @@
 		    (err = snd_via686_init_misc(chip, dev)) < 0)
 			goto __error;
 	} else {
-		if (revision == VIA_REV_8233A) {
+		if (chip_type == VIA_REV_8233A) {
 			if ((err = snd_via8233a_pcm_new(chip)) < 0)
 				goto __error;
 		} else {
@@ -1792,4 +1874,3 @@
 __setup("snd-via82xx=", alsa_card_via82xx_setup);
 
 #endif /* ifndef MODULE */
- 

  reply	other threads:[~2003-01-27 10:42 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <200301221234.33054.tais.hansen@osd.dk>
     [not found] ` <200301221543.52285.tais.hansen@osd.dk>
     [not found]   ` <s5hznpt1bn2.wl@alsa2.suse.de>
     [not found]     ` <200301221647.05780.tais.hansen@osd.dk>
2003-01-22 16:23       ` [Alsa-user] Upgrade problems -addendum Takashi Iwai
2003-01-23  0:35         ` Tais M. Hansen
2003-01-23 10:03           ` Takashi Iwai
2003-01-23 11:15             ` Tais M. Hansen
2003-01-23 11:46               ` Takashi Iwai
2003-01-23 12:36                 ` Tais M. Hansen
2003-01-23 15:08                   ` Takashi Iwai
2003-01-23 17:50                     ` Tais M. Hansen
2003-01-23 18:07                       ` Takashi Iwai
2003-01-23 18:43                         ` Tais M. Hansen
2003-01-24  9:12                           ` Takashi Iwai
2003-01-24 12:41                             ` Tais M. Hansen
2003-01-24 13:30                               ` Takashi Iwai
2003-01-24 14:12                                 ` Tais M. Hansen
2003-01-24 15:45                                   ` Takashi Iwai
2003-01-24 16:40                                     ` Tais M. Hansen
2003-01-24 17:08                                       ` Takashi Iwai
2003-01-24 21:24                                         ` Tais M. Hansen
2003-01-27 10:42                                           ` Takashi Iwai [this message]
2003-01-27 14:42                                             ` Tais M. Hansen
2003-01-27 15:15                                               ` Takashi Iwai
2003-01-27 17:01                                                 ` Tais M. Hansen
2003-01-27 17:27                                                   ` Takashi Iwai
2003-01-28  0:43                                                     ` VIA823x testing Tais M. Hansen
2003-01-28  9:31                                                       ` Takashi Iwai
2003-01-28 13:25                                                         ` Tais M. Hansen
2003-01-28 16:21                                                           ` Takashi Iwai
2003-01-28 23:19                                                             ` Tais M. Hansen
2003-01-24 16:42                                     ` Re: [Alsa-user] Upgrade problems -addendum Tais M. Hansen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hn0lmoouu.wl@alsa2.suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@lists.sourceforge.net \
    --cc=tais.hansen@osd.dk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox