From: Takashi Iwai <tiwai@suse.de>
To: "Tais M. Hansen" <tais.hansen@osd.dk>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: Re: [Alsa-user] Upgrade problems -addendum
Date: Thu, 23 Jan 2003 16:08:51 +0100 [thread overview]
Message-ID: <s5h4r7zzyws.wl@alsa2.suse.de> (raw)
In-Reply-To: <200301231337.13089.tais.hansen@osd.dk>
[-- Attachment #1: Type: text/plain, Size: 1258 bytes --]
At Thu, 23 Jan 2003 13:36:53 +0100,
Tais M. Hansen <tais.hansen@osd.dk> wrote:
>
> > > Well... Ogg123 freezes the same way as with test1. Artsd no longer fails
> > > with "cpu overload", but it's constantly busy and can't play sound.
> > > ...
> > hmm, it'd better to start from the beginning.
> > please try the attached patch (solely).
> > this will generate bunch of debug messages at each interrupt but won't
> > improve any behavior.
> > so, it would be enough to run only once or twice if you got bad
> > playback.
> > from the obtained log, we'll be able to know whether the interrupt is
> > properly generated, or at which condition, the read of register value
> > fails.
>
> Okay, fresh cvs checkout. Enabled POINTER_DEBUG and applied the
> via-pointer-debug.dif.
>
> Ogg123 freezes/stalls without ever making a sound, like with the previous test
> and test3 patches. Log output is attached.
>
> Aplay plays a wav-file fine. No problems noticed. Log output is attached.
>
> When artsd is started a short piece of noise is looped, as described earlier.
> Can't play any sound through arts. Log output attached.
thanks.
it seems really the index value was not updated correctly by the
chip.
ok, take 4: please try the new one...
Takashi
[-- Attachment #2: via-pointer-test4.dif --]
[-- Type: application/octet-stream, Size: 4271 bytes --]
Index: alsa-kernel/pci/via82xx.c
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-kernel/pci/via82xx.c,v
retrieving revision 1.21
diff -u -r1.21 via82xx.c
--- alsa-kernel/pci/via82xx.c 22 Jan 2003 14:21:05 -0000 1.21
+++ alsa-kernel/pci/via82xx.c 23 Jan 2003 15:05:35 -0000
@@ -230,7 +230,10 @@
u32 *table; /* physical address + flag */
dma_addr_t table_addr;
struct snd_via_sg_table *idx_table;
+ int *period_idx;
+ unsigned int periods;
/* for recovery from the unexpected pointer */
+ unsigned int intr_cnt;
unsigned int lastpos;
unsigned int bufsize;
unsigned int bufsize2;
@@ -262,11 +265,17 @@
if (! dev->idx_table)
return -ENOMEM;
}
+ if (! dev->period_idx) {
+ dev->period_idx = kmalloc(sizeof(int) * VIA_TABLE_SIZE, GFP_KERNEL);
+ if (! dev->period_idx)
+ return -ENOMEM;
+ }
/* fill the entries */
idx = 0;
ofs = 0;
for (i = 0; i < periods; i++) {
+ dev->period_idx[i] = idx;
rest = fragsize;
/* fill descriptors for a period.
* a period can be split to several descriptors if it's
@@ -303,6 +312,7 @@
dev->tbl_entries = idx;
dev->bufsize = periods * fragsize;
dev->bufsize2 = dev->bufsize / 2;
+ dev->periods = periods;
return 0;
}
@@ -318,6 +328,10 @@
kfree(dev->idx_table);
dev->idx_table = NULL;
}
+ if (dev->period_idx) {
+ kfree(dev->period_idx);
+ dev->period_idx = NULL;
+ }
}
@@ -481,10 +495,12 @@
/* disable interrupts */
outb(0x00, port + VIA_REG_OFFSET_CONTROL);
/* clear interrupts */
- outb(0x03, port + VIA_REG_OFFSET_STATUS);
- outb(0x00, port + VIA_REG_OFFSET_TYPE); /* for via686 */
+ outb(0x07, port + VIA_REG_OFFSET_STATUS);
+ if (chip->chip_type == TYPE_VIA686)
+ outb(0x00, port + VIA_REG_OFFSET_TYPE);
outl(0, port + VIA_REG_OFFSET_CURR_PTR);
viadev->lastpos = 0;
+ viadev->intr_cnt = 0;
}
@@ -512,9 +528,16 @@
/* check status for each stream */
for (i = 0; i < chip->num_devs; i++) {
viadev_t *viadev = &chip->devs[i];
- if (inb(chip->port + viadev->reg_offset) & (VIA_REG_STAT_EOL|VIA_REG_STAT_FLAG)) {
- outb(VIA_REG_STAT_FLAG | VIA_REG_STAT_EOL, VIAREG(chip, OFFSET_STATUS) + viadev->reg_offset);
+ unsigned long port = chip->port + viadev->reg_offset; /* STATUS */
+ unsigned char status = inb(port) & 0x07;
+ if (! status)
+ continue;
+ outb(status, port); /* ack */
+ if (status & (VIA_REG_STAT_EOL|VIA_REG_STAT_FLAG)) {
if (viadev->substream && viadev->running) {
+ viadev->intr_cnt++;
+ if (viadev->intr_cnt >= viadev->periods)
+ viadev->intr_cnt = 0;
spin_unlock(&chip->reg_lock);
snd_pcm_period_elapsed(viadev->substream);
spin_lock(&chip->reg_lock);
@@ -587,15 +610,21 @@
#ifdef POINTER_DEBUG
printk("fail: idx = %i/%i, lastpos = 0x%x, bufsize2 = 0x%x, offsize = 0x%x, size = 0x%x, count = 0x%x\n", idx, viadev->tbl_entries, viadev->lastpos, viadev->bufsize2, viadev->idx_table[idx].offset, viadev->idx_table[idx].size, count);
#endif
- /* count register returns full size when end of buffer is reached */
if (size != count) {
- snd_printd(KERN_ERR "invalid via82xx_cur_ptr, using last valid pointer\n");
- res = viadev->lastpos;
+ /* recover from the interrupt position */
+ idx = viadev->period_idx[viadev->intr_cnt];
+ size = viadev->idx_table[idx].size;
+ res = viadev->idx_table[idx].offset + size - count;
+ if (res < viadev->lastpos && (res >= viadev->bufsize2 || viadev->lastpos < viadev->bufsize2)) {
+ snd_printd(KERN_ERR "invalid via82xx_cur_ptr, using last valid pointer\n");
+ return viadev->lastpos;
+ }
} else {
+ /* count register returns full size when end of buffer is reached */
res = viadev->idx_table[idx].offset + size;
if (res < viadev->lastpos && (res >= viadev->bufsize2 || viadev->lastpos < viadev->bufsize2)) {
snd_printd(KERN_ERR "invalid via82xx_cur_ptr (2), using last valid pointer\n");
- res = viadev->lastpos;
+ return viadev->lastpos;
}
}
}
@@ -648,7 +677,7 @@
return 0;
spin_lock(&chip->reg_lock);
count = inl(VIAREG(chip, OFFSET_CURR_COUNT) + viadev->reg_offset);
- idx = count >> 24;
+ idx = (count >> 24) & viadev->tbl_entries;
count &= 0xffffff;
res = calc_linear_pos(viadev, idx, count);
spin_unlock(&chip->reg_lock);
next prev parent reply other threads:[~2003-01-23 15:08 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200301221234.33054.tais.hansen@osd.dk>
[not found] ` <200301221543.52285.tais.hansen@osd.dk>
[not found] ` <s5hznpt1bn2.wl@alsa2.suse.de>
[not found] ` <200301221647.05780.tais.hansen@osd.dk>
2003-01-22 16:23 ` [Alsa-user] Upgrade problems -addendum Takashi Iwai
2003-01-23 0:35 ` Tais M. Hansen
2003-01-23 10:03 ` Takashi Iwai
2003-01-23 11:15 ` Tais M. Hansen
2003-01-23 11:46 ` Takashi Iwai
2003-01-23 12:36 ` Tais M. Hansen
2003-01-23 15:08 ` Takashi Iwai [this message]
2003-01-23 17:50 ` Tais M. Hansen
2003-01-23 18:07 ` Takashi Iwai
2003-01-23 18:43 ` Tais M. Hansen
2003-01-24 9:12 ` Takashi Iwai
2003-01-24 12:41 ` Tais M. Hansen
2003-01-24 13:30 ` Takashi Iwai
2003-01-24 14:12 ` Tais M. Hansen
2003-01-24 15:45 ` Takashi Iwai
2003-01-24 16:40 ` Tais M. Hansen
2003-01-24 17:08 ` Takashi Iwai
2003-01-24 21:24 ` Tais M. Hansen
2003-01-27 10:42 ` Takashi Iwai
2003-01-27 14:42 ` Tais M. Hansen
2003-01-27 15:15 ` Takashi Iwai
2003-01-27 17:01 ` Tais M. Hansen
2003-01-27 17:27 ` Takashi Iwai
2003-01-28 0:43 ` VIA823x testing Tais M. Hansen
2003-01-28 9:31 ` Takashi Iwai
2003-01-28 13:25 ` Tais M. Hansen
2003-01-28 16:21 ` Takashi Iwai
2003-01-28 23:19 ` Tais M. Hansen
2003-01-24 16:42 ` Re: [Alsa-user] Upgrade problems -addendum Tais M. Hansen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h4r7zzyws.wl@alsa2.suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@lists.sourceforge.net \
--cc=tais.hansen@osd.dk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox