Re: [PATCH] Volume control quirk for QuickCam E 3500

[Takashi Iwai <tiwai@suse.de>]

At Wed, 22 Jul 2009 12:42:56 +0200,
Alexey Fisher wrote:
> 
> - E3500 report cval->max more than it actually can handel, so if you
> set 95% capture level it will be silently muted.
> - Betwen cval->min and cval-max(real) is 2940 control units,
> but real are only 7 with cval->res = 384.
> - Alsa can't handel less than 10 controls, so make it more
> and set cval->res = 192.
> 
> Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net>

They miss still break lines...
Could you fix it?


thanks,

Takashi

> ---
>  sound/usb/usbmixer.c |   23 ++++++++++++++++++-----
>  1 files changed, 18 insertions(+), 5 deletions(-)
> 
> diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
> index 5c48199..c87bcd1 100644
> --- a/sound/usb/usbmixer.c
> +++ b/sound/usb/usbmixer.c
> @@ -1000,20 +1000,33 @@ static void build_feature_ctl(struct mixer_build *state, unsigned char *desc,
>  		break;
>  	}
>  
> -	/* quirk for UDA1321/N101 */
> -	/* note that detection between firmware 2.1.1.7 (N101) and later 2.1.1.21 */
> -	/* is not very clear from datasheets */
> -	/* I hope that the min value is -15360 for newer firmware --jk */
> +	/* volume control quirks */
>  	switch (state->chip->usb_id) {
>  	case USB_ID(0x0471, 0x0101):
>  	case USB_ID(0x0471, 0x0104):
>  	case USB_ID(0x0471, 0x0105):
>  	case USB_ID(0x0672, 0x1041):
> +	/* quirk for UDA1321/N101.
> +	 * note that detection between firmware 2.1.1.7 (N101) 
> +	 * and later 2.1.1.21 is not very clear from datasheets.
> +	 * I hope that the min value is -15360 for newer firmware --jk
> +	 */
>  		if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
>  		    cval->min == -15616) {
> -			snd_printk(KERN_INFO "using volume control quirk for the UDA1321/N101 chip\n");
> +			snd_printk(KERN_INFO
> +				 "set volume quirk for UDA1321/N101 chip\n");
>  			cval->max = -256;
>  		}
> +
> +	case USB_ID(0x046d, 0x09a4):
> +		if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
> +			snd_printk(KERN_INFO
> +				"set volume quirk for QuickCam E3500\n");
> +			cval->min = 6080;
> +			cval->max = 8768;
> +			cval->res = 192;
> +		}
> +
>  	}
>  
>  	snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n",
> -- 
> 1.6.3.3
>