Re: Fwd: Problems with hda_intel, Santa Rosa, and suspend

[Takashi Iwai <tiwai@suse.de>]

At Fri, 06 Jul 2007 17:46:04 +0200,
Thorsten Leemhuis wrote:
> 
> Hi!
> 
> FYI, I own the same laptop-model as Matt and have similar (identical?)
> problems.
> 
> On 06.07.2007 11:32, Takashi Iwai wrote:
> > At Thu, 5 Jul 2007 21:42:21 -0500,
> > Matt Mullins wrote:
> >> Found what I think is the problem... patch_sigmatel.c set
> >> spec->num_pins=14, yet spec->pin_nids pointed to stac9205_pin_nids,
> >> which was an array of only 12 NIDs.  That caused [total guess here]
> >> either stac92xx_save_bios_config_regs or stac92xx_set_config_regs to
> >> read past the end of the array and into an uninitialized area.  I
> >> changed the 14 to a 12, and it seems to work.  The attached patch is
> >> against the current Mercurial sources, but I made the similar change
> >> to kernel 2.6.22-rc7, and it doesn't use single_cmd anymore.
> > Argh!  Thanks for spotting this nasty bug.
> 
> Agreed; Matt, thx for your work.
> 
> > It'd be better to use ARRAY_SIZE there.  Then typos would be more
> > obvious.  Could you check the patch below?
> 
> Works fine for me (patch was applied to alsa-driver 1.0.14 sources and
> compiled against/tested on a Fedora 2.6.21 kernel and a 2.6.22-rc7-git3
> kernel from the Fedora devel tree)

Thanks for confirmation.  I committed the patch to HG tree now.

> >>  It still
> >> doesn't work after a suspend, though, making me unload and reload the
> >> module.
> > Do you mean you'll get a communication error after suspend, or got no
> > sound output, or any other problem?
> 
> I simply don't get any audio output at all after either suspend or
> hibernate. Reloading the module after suspend/hibernate makes the sound
> working again.

Doesn't changing the mixer values after resume have any effect?

Also, could you compare the codec#* proc dump before and after
suspend/resume?


thanks,

Takashi