AMD-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Huang Rui <ray.huang@amd.com>
To: amd-gfx@lists.freedesktop.org
Cc: "AnZhong Huang" <anzhong.huang@amd.com>,
	"Aaron Liu" <aaron.liu@amd.com>, "Huang Rui" <ray.huang@amd.com>,
	"Alex Deucher" <alexander.deucher@amd.com>,
	"Leo Liu" <leo.liu@amd.com>,
	"Christian König" <christian.koenig@amd.com>
Subject: [PATCH 07/12] drm/amdgpu: use register distance member instead of hardcode in gfxhub v1
Date: Mon,  6 Jul 2020 13:05:04 +0800	[thread overview]
Message-ID: <20200706050509.714975-8-ray.huang@amd.com> (raw)
In-Reply-To: <20200706050509.714975-1-ray.huang@amd.com>

This patch updates to use register distance member instead of hardcode
in gfxhub v1.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
---
 drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c | 41 +++++++++++++++---------
 1 file changed, 25 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c b/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c
index c51833fefc7d..529e46386a50 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c
@@ -38,15 +38,15 @@ u64 gfxhub_v1_0_get_mc_fb_offset(struct amdgpu_device *adev)
 void gfxhub_v1_0_setup_vm_pt_regs(struct amdgpu_device *adev, uint32_t vmid,
 				uint64_t page_table_base)
 {
-	/* two registers distance between mmVM_CONTEXT0_* to mmVM_CONTEXT1_* */
-	int offset = mmVM_CONTEXT1_PAGE_TABLE_BASE_ADDR_LO32
-			- mmVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_LO32;
+	struct amdgpu_vmhub *hub = &adev->vmhub[AMDGPU_GFXHUB_0];
 
 	WREG32_SOC15_OFFSET(GC, 0, mmVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_LO32,
-				offset * vmid, lower_32_bits(page_table_base));
+			    hub->ctx_addr_distance * vmid,
+			    lower_32_bits(page_table_base));
 
 	WREG32_SOC15_OFFSET(GC, 0, mmVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_HI32,
-				offset * vmid, upper_32_bits(page_table_base));
+			    hub->ctx_addr_distance * vmid,
+			    upper_32_bits(page_table_base));
 }
 
 static void gfxhub_v1_0_init_gart_aperture_regs(struct amdgpu_device *adev)
@@ -207,6 +207,7 @@ static void gfxhub_v1_0_disable_identity_aperture(struct amdgpu_device *adev)
 
 static void gfxhub_v1_0_setup_vmid_config(struct amdgpu_device *adev)
 {
+	struct amdgpu_vmhub *hub = &adev->vmhub[AMDGPU_GFXHUB_0];
 	unsigned num_level, block_size;
 	uint32_t tmp;
 	int i;
@@ -245,25 +246,31 @@ static void gfxhub_v1_0_setup_vmid_config(struct amdgpu_device *adev)
 		tmp = REG_SET_FIELD(tmp, VM_CONTEXT1_CNTL,
 				    RETRY_PERMISSION_OR_INVALID_PAGE_FAULT,
 				    !amdgpu_noretry);
-		WREG32_SOC15_OFFSET(GC, 0, mmVM_CONTEXT1_CNTL, i, tmp);
-		WREG32_SOC15_OFFSET(GC, 0, mmVM_CONTEXT1_PAGE_TABLE_START_ADDR_LO32, i*2, 0);
-		WREG32_SOC15_OFFSET(GC, 0, mmVM_CONTEXT1_PAGE_TABLE_START_ADDR_HI32, i*2, 0);
-		WREG32_SOC15_OFFSET(GC, 0, mmVM_CONTEXT1_PAGE_TABLE_END_ADDR_LO32,  i*2,
-			lower_32_bits(adev->vm_manager.max_pfn - 1));
-		WREG32_SOC15_OFFSET(GC, 0, mmVM_CONTEXT1_PAGE_TABLE_END_ADDR_HI32, i*2,
-			upper_32_bits(adev->vm_manager.max_pfn - 1));
+		WREG32_SOC15_OFFSET(GC, 0, mmVM_CONTEXT1_CNTL,
+				    i * hub->ctx_distance, tmp);
+		WREG32_SOC15_OFFSET(GC, 0, mmVM_CONTEXT1_PAGE_TABLE_START_ADDR_LO32,
+				    i * hub->ctx_addr_distance, 0);
+		WREG32_SOC15_OFFSET(GC, 0, mmVM_CONTEXT1_PAGE_TABLE_START_ADDR_HI32,
+				    i * hub->ctx_addr_distance, 0);
+		WREG32_SOC15_OFFSET(GC, 0, mmVM_CONTEXT1_PAGE_TABLE_END_ADDR_LO32,
+				    i * hub->ctx_addr_distance,
+				    lower_32_bits(adev->vm_manager.max_pfn - 1));
+		WREG32_SOC15_OFFSET(GC, 0, mmVM_CONTEXT1_PAGE_TABLE_END_ADDR_HI32,
+				    i * hub->ctx_addr_distance,
+				    upper_32_bits(adev->vm_manager.max_pfn - 1));
 	}
 }
 
 static void gfxhub_v1_0_program_invalidation(struct amdgpu_device *adev)
 {
+	struct amdgpu_vmhub *hub = &adev->vmhub[AMDGPU_GFXHUB_0];
 	unsigned i;
 
 	for (i = 0 ; i < 18; ++i) {
 		WREG32_SOC15_OFFSET(GC, 0, mmVM_INVALIDATE_ENG0_ADDR_RANGE_LO32,
-				    2 * i, 0xffffffff);
+				    i * hub->eng_addr_distance, 0xffffffff);
 		WREG32_SOC15_OFFSET(GC, 0, mmVM_INVALIDATE_ENG0_ADDR_RANGE_HI32,
-				    2 * i, 0x1f);
+				    i * hub->eng_addr_distance, 0x1f);
 	}
 }
 
@@ -299,12 +306,14 @@ int gfxhub_v1_0_gart_enable(struct amdgpu_device *adev)
 
 void gfxhub_v1_0_gart_disable(struct amdgpu_device *adev)
 {
+	struct amdgpu_vmhub *hub = &adev->vmhub[AMDGPU_GFXHUB_0];
 	u32 tmp;
 	u32 i;
 
 	/* Disable all tables */
 	for (i = 0; i < 16; i++)
-		WREG32_SOC15_OFFSET(GC, 0, mmVM_CONTEXT0_CNTL, i, 0);
+		WREG32_SOC15_OFFSET(GC, 0, mmVM_CONTEXT0_CNTL,
+				    i * hub->ctx_distance, 0);
 
 	/* Setup TLB control */
 	tmp = RREG32_SOC15(GC, 0, mmMC_VM_MX_L1_TLB_CNTL);
@@ -360,7 +369,7 @@ void gfxhub_v1_0_set_fault_enable_default(struct amdgpu_device *adev,
 				CRASH_ON_NO_RETRY_FAULT, 1);
 		tmp = REG_SET_FIELD(tmp, VM_L2_PROTECTION_FAULT_CNTL,
 				CRASH_ON_RETRY_FAULT, 1);
-    }
+	}
 	WREG32_SOC15(GC, 0, mmVM_L2_PROTECTION_FAULT_CNTL, tmp);
 }
 
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

  parent reply	other threads:[~2020-07-06  5:05 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-06  5:04 [PATCH 00/12] drm/amdgpu: add register distance Huang Rui
2020-07-06  5:04 ` [PATCH 01/12] drm/amdgpu: add register distance members into vmhub structure Huang Rui
2020-07-06  5:04 ` [PATCH 02/12] drm/amdgpu: use register distance member instead of hardcode in GMC9 Huang Rui
2020-07-06  5:05 ` [PATCH 03/12] drm/amdgpu: use register distance member instead of hardcode in GMC10 Huang Rui
2020-07-06  5:05 ` [PATCH 04/12] drm/amdgpu: use register distance member instead of hardcode in VCN1/JEPG1 Huang Rui
2020-07-06  5:05 ` [PATCH 05/12] drm/amdgpu: use register distance member instead of hardcode in UVD7/VCE4 Huang Rui
2020-07-06  5:05 ` [PATCH 06/12] drm/amdgpu: use register distance member instead of hardcode in VCN2/JEPG2 Huang Rui
2020-07-06  5:05 ` Huang Rui [this message]
2020-07-06  5:05 ` [PATCH 08/12] drm/amdgpu: use register distance member instead of hardcode in gfxhub v2 Huang Rui
2020-07-06  5:05 ` [PATCH 09/12] drm/amdgpu: use register distance member instead of hardcode in gfxhub v2.1 Huang Rui
2020-07-06  5:05 ` [PATCH 10/12] drm/amdgpu: use register distance member instead of hardcode in mmhub v1 Huang Rui
2020-07-06  5:05 ` [PATCH 11/12] drm/amdgpu: use register distance member instead of hardcode in mmhub v2 Huang Rui
2020-07-06  5:05 ` [PATCH 12/12] drm/amdgpu: use register distance member instead of hardcode in mmhub v9.4 Huang Rui
2020-07-06 10:39 ` [PATCH 00/12] drm/amdgpu: add register distance Christian König

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200706050509.714975-8-ray.huang@amd.com \
    --to=ray.huang@amd.com \
    --cc=aaron.liu@amd.com \
    --cc=alexander.deucher@amd.com \
    --cc=amd-gfx@lists.freedesktop.org \
    --cc=anzhong.huang@amd.com \
    --cc=christian.koenig@amd.com \
    --cc=leo.liu@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox