amd-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Philip Yang <Philip.Yang@amd.com>
To: <amd-gfx@lists.freedesktop.org>
Cc: alex.sierra@amd.com, Philip Yang <Philip.Yang@amd.com>,
	Felix.Kuehling@amd.com
Subject: [PATCH 2/2] drm/amdgpu: enable Navi retry fault wptr overflow
Date: Tue, 23 Nov 2021 11:03:52 -0500	[thread overview]
Message-ID: <20211123160352.21228-2-Philip.Yang@amd.com> (raw)
In-Reply-To: <20211123160352.21228-1-Philip.Yang@amd.com>

If xnack is on, VM retry fault interrupt send to IH ring1, and ring1
will be full quickly. IH cannot receive other interrupts, this causes
deadlock if migrating buffer using sdma and waiting for sdma done
while handling retry fault.

Remove VMC from IH storm client, enable ring1 write pointer
overflow, then IH will drop retry fault interrupts and be able to receive
other interrupts while driver is handling retry fault.

IH ring1 write pointer doesn't writeback to memory by IH, and ring1
write pointer recorded by self-irq is not updated, so always read
the latest ring1 write pointer from register.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
---
 drivers/gpu/drm/amd/amdgpu/navi10_ih.c | 33 ++++++++++----------------
 1 file changed, 12 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/navi10_ih.c b/drivers/gpu/drm/amd/amdgpu/navi10_ih.c
index dafad6030947..38241cf0e1f1 100644
--- a/drivers/gpu/drm/amd/amdgpu/navi10_ih.c
+++ b/drivers/gpu/drm/amd/amdgpu/navi10_ih.c
@@ -276,10 +276,8 @@ static int navi10_ih_enable_ring(struct amdgpu_device *adev,
 	tmp = navi10_ih_rb_cntl(ih, tmp);
 	if (ih == &adev->irq.ih)
 		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, RPTR_REARM, !!adev->irq.msi_enabled);
-	if (ih == &adev->irq.ih1) {
-		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_ENABLE, 0);
+	if (ih == &adev->irq.ih1)
 		tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, RB_FULL_DRAIN_ENABLE, 1);
-	}
 
 	if (amdgpu_sriov_vf(adev) && amdgpu_sriov_reg_indirect_ih(adev)) {
 		if (psp_reg_program(&adev->psp, ih_regs->psp_reg_id, tmp)) {
@@ -320,7 +318,6 @@ static int navi10_ih_irq_init(struct amdgpu_device *adev)
 {
 	struct amdgpu_ih_ring *ih[] = {&adev->irq.ih, &adev->irq.ih1, &adev->irq.ih2};
 	u32 ih_chicken;
-	u32 tmp;
 	int ret;
 	int i;
 
@@ -364,15 +361,6 @@ static int navi10_ih_irq_init(struct amdgpu_device *adev)
 	adev->nbio.funcs->ih_doorbell_range(adev, ih[0]->use_doorbell,
 					    ih[0]->doorbell_index);
 
-	tmp = RREG32_SOC15(OSSSYS, 0, mmIH_STORM_CLIENT_LIST_CNTL);
-	tmp = REG_SET_FIELD(tmp, IH_STORM_CLIENT_LIST_CNTL,
-			    CLIENT18_IS_STORM_CLIENT, 1);
-	WREG32_SOC15(OSSSYS, 0, mmIH_STORM_CLIENT_LIST_CNTL, tmp);
-
-	tmp = RREG32_SOC15(OSSSYS, 0, mmIH_INT_FLOOD_CNTL);
-	tmp = REG_SET_FIELD(tmp, IH_INT_FLOOD_CNTL, FLOOD_CNTL_ENABLE, 1);
-	WREG32_SOC15(OSSSYS, 0, mmIH_INT_FLOOD_CNTL, tmp);
-
 	pci_set_master(adev->pdev);
 
 	/* enable interrupts */
@@ -421,12 +409,19 @@ static u32 navi10_ih_get_wptr(struct amdgpu_device *adev,
 	u32 wptr, tmp;
 	struct amdgpu_ih_regs *ih_regs;
 
-	wptr = le32_to_cpu(*ih->wptr_cpu);
-	ih_regs = &ih->ih_regs;
+	if (ih == &adev->irq.ih) {
+		/* Only ring0 supports writeback. On other rings fall back
+		 * to register-based code with overflow checking below.
+		 */
+		wptr = le32_to_cpu(*ih->wptr_cpu);
 
-	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
-		goto out;
+		if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
+			goto out;
+	}
 
+	ih_regs = &ih->ih_regs;
+
+	/* Double check that the overflow wasn't already cleared. */
 	wptr = RREG32_NO_KIQ(ih_regs->ih_rb_wptr);
 	if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
 		goto out;
@@ -514,15 +509,11 @@ static int navi10_ih_self_irq(struct amdgpu_device *adev,
 			      struct amdgpu_irq_src *source,
 			      struct amdgpu_iv_entry *entry)
 {
-	uint32_t wptr = cpu_to_le32(entry->src_data[0]);
-
 	switch (entry->ring_id) {
 	case 1:
-		*adev->irq.ih1.wptr_cpu = wptr;
 		schedule_work(&adev->irq.ih1_work);
 		break;
 	case 2:
-		*adev->irq.ih2.wptr_cpu = wptr;
 		schedule_work(&adev->irq.ih2_work);
 		break;
 	default: break;
-- 
2.17.1


  reply	other threads:[~2021-11-23 16:04 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-23 16:03 [PATCH 1/2] drm/amdgpu: enable Navi 48-bit IH timestamp counter Philip Yang
2021-11-23 16:03 ` Philip Yang [this message]
2021-11-23 16:58   ` [PATCH 2/2] drm/amdgpu: enable Navi retry fault wptr overflow Felix Kuehling
2021-11-24  7:08 ` [PATCH 1/2] drm/amdgpu: enable Navi 48-bit IH timestamp counter Christian König

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211123160352.21228-2-Philip.Yang@amd.com \
    --to=philip.yang@amd.com \
    --cc=Felix.Kuehling@amd.com \
    --cc=alex.sierra@amd.com \
    --cc=amd-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).