From: Felix Kuehling <felix.kuehling@amd.com>
To: Philip Yang <Philip.Yang@amd.com>, amd-gfx@lists.freedesktop.org
Cc: alex.sierra@amd.com
Subject: Re: [PATCH 2/2] drm/amdgpu: enable Navi retry fault wptr overflow
Date: Tue, 23 Nov 2021 11:58:39 -0500 [thread overview]
Message-ID: <5cae2d74-328b-1ee6-e0fa-7ede2a3f8a58@amd.com> (raw)
In-Reply-To: <20211123160352.21228-2-Philip.Yang@amd.com>
Am 2021-11-23 um 11:03 a.m. schrieb Philip Yang:
> If xnack is on, VM retry fault interrupt send to IH ring1, and ring1
> will be full quickly. IH cannot receive other interrupts, this causes
> deadlock if migrating buffer using sdma and waiting for sdma done
> while handling retry fault.
>
> Remove VMC from IH storm client, enable ring1 write pointer
> overflow, then IH will drop retry fault interrupts and be able to receive
> other interrupts while driver is handling retry fault.
>
> IH ring1 write pointer doesn't writeback to memory by IH, and ring1
> write pointer recorded by self-irq is not updated, so always read
> the latest ring1 write pointer from register.
>
> Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Looks like the same thing you did in this commit for Vega:
b672cb1eee59 drm/amdgpu: enable retry fault wptr overflow
This series is
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
> ---
> drivers/gpu/drm/amd/amdgpu/navi10_ih.c | 33 ++++++++++----------------
> 1 file changed, 12 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/navi10_ih.c b/drivers/gpu/drm/amd/amdgpu/navi10_ih.c
> index dafad6030947..38241cf0e1f1 100644
> --- a/drivers/gpu/drm/amd/amdgpu/navi10_ih.c
> +++ b/drivers/gpu/drm/amd/amdgpu/navi10_ih.c
> @@ -276,10 +276,8 @@ static int navi10_ih_enable_ring(struct amdgpu_device *adev,
> tmp = navi10_ih_rb_cntl(ih, tmp);
> if (ih == &adev->irq.ih)
> tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, RPTR_REARM, !!adev->irq.msi_enabled);
> - if (ih == &adev->irq.ih1) {
> - tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, WPTR_OVERFLOW_ENABLE, 0);
> + if (ih == &adev->irq.ih1)
> tmp = REG_SET_FIELD(tmp, IH_RB_CNTL, RB_FULL_DRAIN_ENABLE, 1);
> - }
>
> if (amdgpu_sriov_vf(adev) && amdgpu_sriov_reg_indirect_ih(adev)) {
> if (psp_reg_program(&adev->psp, ih_regs->psp_reg_id, tmp)) {
> @@ -320,7 +318,6 @@ static int navi10_ih_irq_init(struct amdgpu_device *adev)
> {
> struct amdgpu_ih_ring *ih[] = {&adev->irq.ih, &adev->irq.ih1, &adev->irq.ih2};
> u32 ih_chicken;
> - u32 tmp;
> int ret;
> int i;
>
> @@ -364,15 +361,6 @@ static int navi10_ih_irq_init(struct amdgpu_device *adev)
> adev->nbio.funcs->ih_doorbell_range(adev, ih[0]->use_doorbell,
> ih[0]->doorbell_index);
>
> - tmp = RREG32_SOC15(OSSSYS, 0, mmIH_STORM_CLIENT_LIST_CNTL);
> - tmp = REG_SET_FIELD(tmp, IH_STORM_CLIENT_LIST_CNTL,
> - CLIENT18_IS_STORM_CLIENT, 1);
> - WREG32_SOC15(OSSSYS, 0, mmIH_STORM_CLIENT_LIST_CNTL, tmp);
> -
> - tmp = RREG32_SOC15(OSSSYS, 0, mmIH_INT_FLOOD_CNTL);
> - tmp = REG_SET_FIELD(tmp, IH_INT_FLOOD_CNTL, FLOOD_CNTL_ENABLE, 1);
> - WREG32_SOC15(OSSSYS, 0, mmIH_INT_FLOOD_CNTL, tmp);
> -
> pci_set_master(adev->pdev);
>
> /* enable interrupts */
> @@ -421,12 +409,19 @@ static u32 navi10_ih_get_wptr(struct amdgpu_device *adev,
> u32 wptr, tmp;
> struct amdgpu_ih_regs *ih_regs;
>
> - wptr = le32_to_cpu(*ih->wptr_cpu);
> - ih_regs = &ih->ih_regs;
> + if (ih == &adev->irq.ih) {
> + /* Only ring0 supports writeback. On other rings fall back
> + * to register-based code with overflow checking below.
> + */
> + wptr = le32_to_cpu(*ih->wptr_cpu);
>
> - if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
> - goto out;
> + if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
> + goto out;
> + }
>
> + ih_regs = &ih->ih_regs;
> +
> + /* Double check that the overflow wasn't already cleared. */
> wptr = RREG32_NO_KIQ(ih_regs->ih_rb_wptr);
> if (!REG_GET_FIELD(wptr, IH_RB_WPTR, RB_OVERFLOW))
> goto out;
> @@ -514,15 +509,11 @@ static int navi10_ih_self_irq(struct amdgpu_device *adev,
> struct amdgpu_irq_src *source,
> struct amdgpu_iv_entry *entry)
> {
> - uint32_t wptr = cpu_to_le32(entry->src_data[0]);
> -
> switch (entry->ring_id) {
> case 1:
> - *adev->irq.ih1.wptr_cpu = wptr;
> schedule_work(&adev->irq.ih1_work);
> break;
> case 2:
> - *adev->irq.ih2.wptr_cpu = wptr;
> schedule_work(&adev->irq.ih2_work);
> break;
> default: break;
next prev parent reply other threads:[~2021-11-23 16:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-23 16:03 [PATCH 1/2] drm/amdgpu: enable Navi 48-bit IH timestamp counter Philip Yang
2021-11-23 16:03 ` [PATCH 2/2] drm/amdgpu: enable Navi retry fault wptr overflow Philip Yang
2021-11-23 16:58 ` Felix Kuehling [this message]
2021-11-24 7:08 ` [PATCH 1/2] drm/amdgpu: enable Navi 48-bit IH timestamp counter Christian König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5cae2d74-328b-1ee6-e0fa-7ede2a3f8a58@amd.com \
--to=felix.kuehling@amd.com \
--cc=Philip.Yang@amd.com \
--cc=alex.sierra@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox