From: Mario Limonciello <mario.limonciello@amd.com>
To: Antheas Kapenekakis <lkml@antheas.dev>,
Alex Deucher <alexander.deucher@amd.com>,
Shyam Sundar S K <Shyam-sundar.S-k@amd.com>,
Perry Yuan <perry.yuan@amd.com>
Cc: amd-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org
Subject: Re: [PATCH v1 3/3] drm/amdgpu: only send the SMU RLC notification on S3
Date: Fri, 24 Oct 2025 11:20:32 -0500 [thread overview]
Message-ID: <27439123-98aa-4096-a4e4-3c8eecb3aaca@amd.com> (raw)
In-Reply-To: <61da9864-b7c8-43f1-b437-36756077b545@amd.com>
On 10/24/2025 10:54 AM, Mario Limonciello wrote:
>
>
> On 10/24/2025 10:21 AM, Antheas Kapenekakis wrote:
>> From: Alex Deucher <alexander.deucher@amd.com>
>>
>> For S0ix, the RLC is not powered down. Rework the Van Gogh logic to
>> skip powering it down and skip part of post-init.
>>
>> Fixes: 8c4e9105b2a8 ("drm/amdgpu: optimize RLC powerdown notification
>> on Vangogh")
>> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659
>> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>> Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
>> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
>> ---
>> drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 8 +++++---
>> drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 6 ++++++
>> drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c | 3 +++
>> 3 files changed, 14 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/
>> drm/amd/amdgpu/amdgpu_device.c
>> index 3d032c4e2dce..220b12d59795 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>> @@ -5243,9 +5243,11 @@ int amdgpu_device_suspend(struct drm_device
>> *dev, bool notify_clients)
>> if (amdgpu_sriov_vf(adev))
>> amdgpu_virt_release_full_gpu(adev, false);
>> - r = amdgpu_dpm_notify_rlc_state(adev, false);
>> - if (r)
>> - return r;
>> + if (!adev->in_s0ix) {
>> + r = amdgpu_dpm_notify_rlc_state(adev, false);
>> + if (r)
>> + return r;
>> + }
>
> Just FYI this is going to clash with my unwind failed suspend series [1].
>
> This is fine, just whichever "lands" first the other will need to rework
> a little bit and I wanted to mention it.
>
> Link: https://lore.kernel.org/amd-gfx/20251023165243.317153-2-
> mario.limonciello@amd.com/ [1]
>
> This does have me wondering though why amdgpu_dpm_notify_rlc_state() is
> even in amdgpu_device_suspend()? This is only used on Van Gogh.
> Should we be pushing this deeper into amdgpu_device_ip_suspend_phase2()?
>
> Or should we maybe overhaul this to move the RLC notification into
> a .set_mp1_state callback instead so it's more similar to all the other
> ASICs?
>
My proposal as such is here:
https://lore.kernel.org/amd-gfx/20251024161216.345691-1-mario.limonciello@amd.com/
It would need some testing though to make sure it didn't break Steam
Deck or Steam Deck OLED.
>> return 0;
>> }
>> diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/
>> drm/amd/pm/swsmu/amdgpu_smu.c
>> index fb8086859857..244b8c364d45 100644
>> --- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
>> +++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
>> @@ -2040,6 +2040,12 @@ static int smu_disable_dpms(struct smu_context
>> *smu)
>> smu->is_apu && (amdgpu_in_reset(adev) || adev->in_s0ix))
>> return 0;
>> + /* vangogh s0ix */
>> + if ((amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(11, 5, 0) ||
>> + amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(11, 5,
>> 2)) &&
>> + adev->in_s0ix)
>> + return 0;
>> +
>
> How about for GPU reset, does PMFW handle this too?
>
>> /*
>> * For gpu reset, runpm and hibernation through BACO,
>> * BACO feature has to be kept enabled.
>> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c b/
>> drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
>> index 2c9869feba61..0708d0f0938b 100644
>> --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
>> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
>> @@ -2217,6 +2217,9 @@ static int vangogh_post_smu_init(struct
>> smu_context *smu)
>> uint32_t total_cu = adev->gfx.config.max_cu_per_sh *
>> adev->gfx.config.max_sh_per_se * adev-
>> >gfx.config.max_shader_engines;
>> + if (adev->in_s0ix)
>> + return 0;
>> +
>> /* allow message will be sent after enable message on Vangogh*/
>> if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_GFXCLK_BIT) &&
>> (adev->pg_flags & AMD_PG_SUPPORT_GFX_PG)) {
>
next prev parent reply other threads:[~2025-10-24 16:20 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-24 15:21 [PATCH v1 0/3] platform/x86/amd: Add S0ix support to the Xbox Ally Antheas Kapenekakis
2025-10-24 15:21 ` [PATCH v1 1/3] platform/x86/amd/pmc: Add support for Van Gogh SoC Antheas Kapenekakis
2025-10-24 15:43 ` Mario Limonciello
2025-10-24 16:08 ` Antheas Kapenekakis
2025-10-24 16:32 ` Mario Limonciello
2025-10-27 8:22 ` Shyam Sundar S K
2025-10-27 8:31 ` Antheas Kapenekakis
2025-10-27 8:36 ` Shyam Sundar S K
2025-10-27 8:41 ` Antheas Kapenekakis
2025-11-05 11:13 ` Ilpo Järvinen
2025-11-05 11:28 ` Shyam Sundar S K
2025-11-05 11:34 ` Antheas Kapenekakis
2025-11-05 13:15 ` Shyam Sundar S K
2025-10-27 13:36 ` Mario Limonciello
2025-10-31 13:05 ` Mario Limonciello (AMD) (kernel.org)
2025-10-24 15:21 ` [PATCH v1 2/3] platform/x86/amd/pmc: Add spurious_8042 to Xbox Ally Antheas Kapenekakis
2025-10-24 15:54 ` Mario Limonciello (AMD) (kernel.org)
2025-10-24 15:21 ` [PATCH v1 3/3] drm/amdgpu: only send the SMU RLC notification on S3 Antheas Kapenekakis
2025-10-24 15:54 ` Mario Limonciello
2025-10-24 16:08 ` Alex Deucher
2025-10-24 16:20 ` Mario Limonciello [this message]
2025-10-24 16:24 ` Antheas Kapenekakis
2025-10-24 16:45 ` Antheas Kapenekakis
2025-10-24 16:52 ` Mario Limonciello
2025-10-24 17:02 ` Antheas Kapenekakis
2025-10-24 15:32 ` [PATCH v1 0/3] platform/x86/amd: Add S0ix support to the Xbox Ally Mario Limonciello
2025-10-24 15:38 ` Antheas Kapenekakis
2025-10-24 15:45 ` Mario Limonciello
2025-10-31 13:07 ` Mario Limonciello (AMD) (kernel.org)
2025-11-05 12:24 ` Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=27439123-98aa-4096-a4e4-3c8eecb3aaca@amd.com \
--to=mario.limonciello@amd.com \
--cc=Shyam-sundar.S-k@amd.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lkml@antheas.dev \
--cc=perry.yuan@amd.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox