From: Mario Limonciello <mario.limonciello@amd.com>
To: Antheas Kapenekakis <lkml@antheas.dev>
Cc: Alex Deucher <alexander.deucher@amd.com>,
Shyam Sundar S K <Shyam-sundar.S-k@amd.com>,
Perry Yuan <perry.yuan@amd.com>,
amd-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org
Subject: Re: [PATCH v1 3/3] drm/amdgpu: only send the SMU RLC notification on S3
Date: Fri, 24 Oct 2025 11:52:19 -0500 [thread overview]
Message-ID: <d6f72b8f-1961-406a-aed8-5f4570ce98d1@amd.com> (raw)
In-Reply-To: <CAGwozwH+UneR7uB0h_yrEWTBM=-uHapmzL3JnmrJ8S2v5WQ2SQ@mail.gmail.com>
On 10/24/2025 11:45 AM, Antheas Kapenekakis wrote:
> On Fri, 24 Oct 2025 at 18:24, Antheas Kapenekakis <lkml@antheas.dev> wrote:
>>
>> On Fri, 24 Oct 2025 at 18:20, Mario Limonciello
>> <mario.limonciello@amd.com> wrote:
>>>
>>>
>>>
>>> On 10/24/2025 10:54 AM, Mario Limonciello wrote:
>>>>
>>>>
>>>> On 10/24/2025 10:21 AM, Antheas Kapenekakis wrote:
>>>>> From: Alex Deucher <alexander.deucher@amd.com>
>>>>>
>>>>> For S0ix, the RLC is not powered down. Rework the Van Gogh logic to
>>>>> skip powering it down and skip part of post-init.
>>>>>
>>>>> Fixes: 8c4e9105b2a8 ("drm/amdgpu: optimize RLC powerdown notification
>>>>> on Vangogh")
>>>>> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659
>>>>> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>>>>> Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
>>>>> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
>>>>> ---
>>>>> drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 8 +++++---
>>>>> drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 6 ++++++
>>>>> drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c | 3 +++
>>>>> 3 files changed, 14 insertions(+), 3 deletions(-)
>>>>>
>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/
>>>>> drm/amd/amdgpu/amdgpu_device.c
>>>>> index 3d032c4e2dce..220b12d59795 100644
>>>>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>>>>> @@ -5243,9 +5243,11 @@ int amdgpu_device_suspend(struct drm_device
>>>>> *dev, bool notify_clients)
>>>>> if (amdgpu_sriov_vf(adev))
>>>>> amdgpu_virt_release_full_gpu(adev, false);
>>>>> - r = amdgpu_dpm_notify_rlc_state(adev, false);
>>>>> - if (r)
>>>>> - return r;
>>>>> + if (!adev->in_s0ix) {
>>>>> + r = amdgpu_dpm_notify_rlc_state(adev, false);
>>>>> + if (r)
>>>>> + return r;
>>>>> + }
>>>>
>>>> Just FYI this is going to clash with my unwind failed suspend series [1].
>>>>
>>>> This is fine, just whichever "lands" first the other will need to rework
>>>> a little bit and I wanted to mention it.
>>>>
>>>> Link: https://lore.kernel.org/amd-gfx/20251023165243.317153-2-
>>>> mario.limonciello@amd.com/ [1]
>>>>
>>>> This does have me wondering though why amdgpu_dpm_notify_rlc_state() is
>>>> even in amdgpu_device_suspend()? This is only used on Van Gogh.
>>>> Should we be pushing this deeper into amdgpu_device_ip_suspend_phase2()?
>>>>
>>>> Or should we maybe overhaul this to move the RLC notification into
>>>> a .set_mp1_state callback instead so it's more similar to all the other
>>>> ASICs?
>>>>
>>>
>>> My proposal as such is here:
>>>
>>> https://lore.kernel.org/amd-gfx/20251024161216.345691-1-mario.limonciello@amd.com/
>>>
>>> It would need some testing though to make sure it didn't break Steam
>>> Deck or Steam Deck OLED.
>>
>> I will give it a quick go on my OLED.
>
> Horribly broken. Did not enter S3 and when waking up fan maxed out and
> it bootlooped. Journalctl stops on suspend entry. It works on the Xbox
> ally though
>
> My series works on both
OK.
Can you try Alex's idea instead? Just comment out the RLC notification
code in amdgpu_device_suspend().
It's supposed to already be called in smu_disable_dpms() anyway.
>
>
>>
>>>>> return 0;
>>>>> }
>>>>> diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/
>>>>> drm/amd/pm/swsmu/amdgpu_smu.c
>>>>> index fb8086859857..244b8c364d45 100644
>>>>> --- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
>>>>> +++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
>>>>> @@ -2040,6 +2040,12 @@ static int smu_disable_dpms(struct smu_context
>>>>> *smu)
>>>>> smu->is_apu && (amdgpu_in_reset(adev) || adev->in_s0ix))
>>>>> return 0;
>>>>> + /* vangogh s0ix */
>>>>> + if ((amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(11, 5, 0) ||
>>>>> + amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(11, 5,
>>>>> 2)) &&
>>>>> + adev->in_s0ix)
>>>>> + return 0;
>>>>> +
>>>>
>>>> How about for GPU reset, does PMFW handle this too?
>>>>
>>>>> /*
>>>>> * For gpu reset, runpm and hibernation through BACO,
>>>>> * BACO feature has to be kept enabled.
>>>>> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c b/
>>>>> drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
>>>>> index 2c9869feba61..0708d0f0938b 100644
>>>>> --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
>>>>> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
>>>>> @@ -2217,6 +2217,9 @@ static int vangogh_post_smu_init(struct
>>>>> smu_context *smu)
>>>>> uint32_t total_cu = adev->gfx.config.max_cu_per_sh *
>>>>> adev->gfx.config.max_sh_per_se * adev-
>>>>>> gfx.config.max_shader_engines;
>>>>> + if (adev->in_s0ix)
>>>>> + return 0;
>>>>> +
>>>>> /* allow message will be sent after enable message on Vangogh*/
>>>>> if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_GFXCLK_BIT) &&
>>>>> (adev->pg_flags & AMD_PG_SUPPORT_GFX_PG)) {
>>>>
>>>
>>>
>
next prev parent reply other threads:[~2025-10-24 16:52 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-24 15:21 [PATCH v1 0/3] platform/x86/amd: Add S0ix support to the Xbox Ally Antheas Kapenekakis
2025-10-24 15:21 ` [PATCH v1 1/3] platform/x86/amd/pmc: Add support for Van Gogh SoC Antheas Kapenekakis
2025-10-24 15:43 ` Mario Limonciello
2025-10-24 16:08 ` Antheas Kapenekakis
2025-10-24 16:32 ` Mario Limonciello
2025-10-27 8:22 ` Shyam Sundar S K
2025-10-27 8:31 ` Antheas Kapenekakis
2025-10-27 8:36 ` Shyam Sundar S K
2025-10-27 8:41 ` Antheas Kapenekakis
2025-11-05 11:13 ` Ilpo Järvinen
2025-11-05 11:28 ` Shyam Sundar S K
2025-11-05 11:34 ` Antheas Kapenekakis
2025-11-05 13:15 ` Shyam Sundar S K
2025-10-27 13:36 ` Mario Limonciello
2025-10-31 13:05 ` Mario Limonciello (AMD) (kernel.org)
2025-10-24 15:21 ` [PATCH v1 2/3] platform/x86/amd/pmc: Add spurious_8042 to Xbox Ally Antheas Kapenekakis
2025-10-24 15:54 ` Mario Limonciello (AMD) (kernel.org)
2025-10-24 15:21 ` [PATCH v1 3/3] drm/amdgpu: only send the SMU RLC notification on S3 Antheas Kapenekakis
2025-10-24 15:54 ` Mario Limonciello
2025-10-24 16:08 ` Alex Deucher
2025-10-24 16:20 ` Mario Limonciello
2025-10-24 16:24 ` Antheas Kapenekakis
2025-10-24 16:45 ` Antheas Kapenekakis
2025-10-24 16:52 ` Mario Limonciello [this message]
2025-10-24 17:02 ` Antheas Kapenekakis
2025-10-24 15:32 ` [PATCH v1 0/3] platform/x86/amd: Add S0ix support to the Xbox Ally Mario Limonciello
2025-10-24 15:38 ` Antheas Kapenekakis
2025-10-24 15:45 ` Mario Limonciello
2025-10-31 13:07 ` Mario Limonciello (AMD) (kernel.org)
2025-11-05 12:24 ` Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d6f72b8f-1961-406a-aed8-5f4570ce98d1@amd.com \
--to=mario.limonciello@amd.com \
--cc=Shyam-sundar.S-k@amd.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lkml@antheas.dev \
--cc=perry.yuan@amd.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox