ATH10K Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Greear <greearb@candelatech.com>
To: Simon Wunderlich <sw@simonwunderlich.de>, ath10k@lists.infradead.org
Subject: Re: ath10k tx99-like test mode?
Date: Mon, 16 Mar 2015 08:04:05 -0700	[thread overview]
Message-ID: <5506F0E5.2000205@candelatech.com> (raw)
In-Reply-To: <1934267.DCC3TFggkK@prime>

On 03/16/2015 05:21 AM, Simon Wunderlich wrote:
> Hi,
>
> is there a test mode for ath10k where one can set different legacy/MCS rates to
> test output power levels in a lab? We used tx99 on ath9k for that purpose, is
> there an equivalent feature in ath10k as well?

My firmware and driver changes have recently given the ability to set
fixed rates for all types of traffic.

Only caveat so far as that mgt frames (beacons and such) cannot be set
to HT or VHT rates.

Stock firmware should be able to set all but mgt rates (bcast, ucast, mcast) with a firmware
update, but stock firmware does not support setting mgt rate from what I can tell.

Maybe not quite as good as what you can do with ath9k, but perhaps good enough?

Thanks,
Ben

>
> Thanks!
>      Simon
>
>
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
>

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  reply	other threads:[~2015-03-16 15:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-16 12:21 ath10k tx99-like test mode? Simon Wunderlich
2015-03-16 15:04 ` Ben Greear [this message]
2015-03-16 21:01 ` Pushpal Sidhu
  -- strict thread matches above, loose matches on Subject: below --
2015-03-16 20:51 mrex
2015-03-16 21:21 ` Ben Greear

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5506F0E5.2000205@candelatech.com \
    --to=greearb@candelatech.com \
    --cc=ath10k@lists.infradead.org \
    --cc=sw@simonwunderlich.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox