* ath10k: first qca6174 hw2.1 firmware released @ 2015-08-13 10:31 Kalle Valo 2015-08-13 14:00 ` Lapo Calamandrei 0 siblings, 1 reply; 9+ messages in thread From: Kalle Valo @ 2015-08-13 10:31 UTC (permalink / raw) To: ath10k; +Cc: linux-wireless Hi, I just pushed the first qca6174 hw2.1 firmware to ath10k-firmware.git: https://github.com/kvalo/ath10k-firmware/commit/7f7e7dda33676ced293de477b03711199ffe5256 Please test and provide feedback. -- Kalle Valo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath10k: first qca6174 hw2.1 firmware released 2015-08-13 10:31 ath10k: first qca6174 hw2.1 firmware released Kalle Valo @ 2015-08-13 14:00 ` Lapo Calamandrei 2015-08-17 5:52 ` Michal Kazior 0 siblings, 1 reply; 9+ messages in thread From: Lapo Calamandrei @ 2015-08-13 14:00 UTC (permalink / raw) To: Kalle Valo; +Cc: ath10k 2015-08-13 12:31 GMT+02:00 Kalle Valo <kvalo@qca.qualcomm.com>: > Hi, > > I just pushed the first qca6174 hw2.1 firmware to ath10k-firmware.git: > > https://github.com/kvalo/ath10k-firmware/commit/7f7e7dda33676ced293de477b03711199ffe5256 > > Please test and provide feedback. > > -- > Kalle Valo > Loads w/o skip_otp and works fine here (qca6174), except it crashes on 5GHz network connection attempt as the one created from the window drivers. Ciao Lapo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath10k: first qca6174 hw2.1 firmware released 2015-08-13 14:00 ` Lapo Calamandrei @ 2015-08-17 5:52 ` Michal Kazior 2015-08-24 16:26 ` Lapo Calamandrei 0 siblings, 1 reply; 9+ messages in thread From: Michal Kazior @ 2015-08-17 5:52 UTC (permalink / raw) To: Lapo Calamandrei; +Cc: Kalle Valo, ath10k@lists.infradead.org On 13 August 2015 at 16:00, Lapo Calamandrei <calamandrei@gmail.com> wrote: > 2015-08-13 12:31 GMT+02:00 Kalle Valo <kvalo@qca.qualcomm.com>: >> Hi, >> >> I just pushed the first qca6174 hw2.1 firmware to ath10k-firmware.git: >> >> https://github.com/kvalo/ath10k-firmware/commit/7f7e7dda33676ced293de477b03711199ffe5256 >> >> Please test and provide feedback. >> >> -- >> Kalle Valo >> > > Loads w/o skip_otp and works fine here (qca6174), except it crashes on > 5GHz network connection attempt as the one created from the window > drivers. Paste the crash register dump and `iw list` output, please. Michał _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath10k: first qca6174 hw2.1 firmware released 2015-08-17 5:52 ` Michal Kazior @ 2015-08-24 16:26 ` Lapo Calamandrei 2015-08-25 5:09 ` Michal Kazior 0 siblings, 1 reply; 9+ messages in thread From: Lapo Calamandrei @ 2015-08-24 16:26 UTC (permalink / raw) To: Michal Kazior; +Cc: Kalle Valo, ath10k@lists.infradead.org 2015-08-17 7:52 GMT+02:00 Michal Kazior <michal.kazior@tieto.com>: > On 13 August 2015 at 16:00, Lapo Calamandrei <calamandrei@gmail.com> wrote: >> 2015-08-13 12:31 GMT+02:00 Kalle Valo <kvalo@qca.qualcomm.com>: >>> Hi, >>> >>> I just pushed the first qca6174 hw2.1 firmware to ath10k-firmware.git: >>> >>> https://github.com/kvalo/ath10k-firmware/commit/7f7e7dda33676ced293de477b03711199ffe5256 >>> >>> Please test and provide feedback. >>> >>> -- >>> Kalle Valo >>> >> >> Loads w/o skip_otp and works fine here (qca6174), except it crashes on >> 5GHz network connection attempt as the one created from the window >> drivers. > > Paste the crash register dump and `iw list` output, please. > > > Michał Sorry for the late reply. Here's the iw list output: [lapo@localhost ~]$ iw list Wiphy phy0 max # scan SSIDs: 16 max scan IEs length: 195 bytes max # sched scan SSIDs: 0 max # match sets: 0 Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Device supports RSN-IBSS. Device supports AP-side u-APSD. Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x3 RX 0x3 Configured Antennas: TX 0x3 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * monitor * P2P-client * P2P-GO * P2P-device Band 1: Capabilities: 0x19e3 RX LDPC HT20/HT40 Static SM Power Save RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 VHT Capabilities (0x339031b2): Max MPDU length: 11454 Supported Channel Width: neither 160 nor 80+80 RX LDPC short GI (80 MHz) TX STBC SU Beamformee MU Beamformee RX antenna pattern consistency TX antenna pattern consistency VHT RX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT RX highest supported: 0 Mbps VHT TX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT TX highest supported: 0 Mbps Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) (no IR) * 2472 MHz [13] (20.0 dBm) (no IR) * 2484 MHz [14] (disabled) Band 2: Capabilities: 0x19e3 RX LDPC HT20/HT40 Static SM Power Save RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 VHT Capabilities (0x339031b2): Max MPDU length: 11454 Supported Channel Width: neither 160 nor 80+80 RX LDPC short GI (80 MHz) TX STBC SU Beamformee MU Beamformee RX antenna pattern consistency TX antenna pattern consistency VHT RX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT RX highest supported: 0 Mbps VHT TX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT TX highest supported: 0 Mbps Bitrates (non-HT): * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Frequencies: * 5180 MHz [36] (20.0 dBm) (no IR) * 5200 MHz [40] (20.0 dBm) (no IR) * 5220 MHz [44] (20.0 dBm) (no IR) * 5240 MHz [48] (20.0 dBm) (no IR) * 5260 MHz [52] (20.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5280 MHz [56] (20.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5300 MHz [60] (20.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5320 MHz [64] (20.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5500 MHz [100] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5520 MHz [104] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5540 MHz [108] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5560 MHz [112] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5580 MHz [116] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5600 MHz [120] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5620 MHz [124] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5640 MHz [128] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5660 MHz [132] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5680 MHz [136] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5700 MHz [140] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 527 sec) DFS CAC time: 60000 ms * 5720 MHz [144] (disabled) * 5745 MHz [149] (disabled) * 5765 MHz [153] (disabled) * 5785 MHz [157] (disabled) * 5805 MHz [161] (disabled) * 5825 MHz [165] (disabled) Supported commands: * new_interface * set_interface * new_key * start_ap * new_station * new_mpath * set_mesh_config * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * frame * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * probe_client * set_noack_map * register_beacons * start_p2p_device * set_mcast_rate * channel_switch * set_qos_map * connect * disconnect Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * P2P-device: 0x40 0xd0 software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ managed } <= 2, #{ AP, P2P-client, P2P-GO } <= 2, #{ P2P-device } <= 1, total <= 4, #channels <= 1 * #{ managed } <= 2, #{ P2P-client } <= 2, #{ AP, P2P-GO } <= 1, #{ P2P-device } <= 1, total <= 4, #channels <= 2 * #{ managed } <= 1, #{ IBSS } <= 1, total <= 2, #channels <= 1 HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS. Device supports SAE with AUTHENTICATE command Device supports scan flush. Device supports per-vif TX power setting Driver supports a userspace MPM Driver/device bandwidth changes during BSS lifetime (AP/GO mode) Device supports static SMPS Device supports configuring vdev MAC-addr on create. Device supports VHT-IBSS. Here's the register dump: ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: firmware register dump: ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [00]: 0x05010000 0x000015B3 0x00939797 0x00955B31 ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [04]: 0x00939797 0x00060330 0x00000000 0x00000000 ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [08]: 0x00413980 0x0000FFFF 0x00000000 0x00000000 ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [12]: 0x00000009 0xFFFFFFFF 0x0096C09C 0x0096C0A7 ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [16]: 0x0096BDBC 0x009287BD 0x00000000 0x009287BD ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [20]: 0x40939797 0x0041A700 0x00407124 0x00000000 ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [24]: 0x8093D6C4 0x0041A760 0x004059D0 0xC0939797 ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [28]: 0x8094777F 0x0041A780 0x0046D5D8 0x00000001 ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [32]: 0x800AA427 0x0041A7B0 0x0046D5D8 0x00000001 ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [36]: 0x800AA58E 0x0041A7D0 0x00424824 0x00000001 ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [40]: 0x80994D90 0x0041A7F0 0x00424824 0x0041A838 ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [44]: 0x80996DC6 0x0041A820 0x0046F888 0x00412984 ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [48]: 0x800B43F5 0x0041A860 0x004222F8 0x00005008 ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [52]: 0x809A6ACC 0x0041A8F0 0x0042930C 0x0042CA24 ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [56]: 0x809A6120 0x0041A930 0x0041A958 0x00427110 Regards, Lapo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath10k: first qca6174 hw2.1 firmware released 2015-08-24 16:26 ` Lapo Calamandrei @ 2015-08-25 5:09 ` Michal Kazior 2015-08-25 14:04 ` Lapo Calamandrei 0 siblings, 1 reply; 9+ messages in thread From: Michal Kazior @ 2015-08-25 5:09 UTC (permalink / raw) To: Lapo Calamandrei; +Cc: Kalle Valo, ath10k@lists.infradead.org On 24 August 2015 at 18:26, Lapo Calamandrei <calamandrei@gmail.com> wrote: > 2015-08-17 7:52 GMT+02:00 Michal Kazior <michal.kazior@tieto.com>: >> On 13 August 2015 at 16:00, Lapo Calamandrei <calamandrei@gmail.com> wrote: >>> 2015-08-13 12:31 GMT+02:00 Kalle Valo <kvalo@qca.qualcomm.com>: >>>> Hi, >>>> >>>> I just pushed the first qca6174 hw2.1 firmware to ath10k-firmware.git: >>>> >>>> https://github.com/kvalo/ath10k-firmware/commit/7f7e7dda33676ced293de477b03711199ffe5256 >>>> >>>> Please test and provide feedback. >>>> >>>> -- >>>> Kalle Valo >>>> >>> >>> Loads w/o skip_otp and works fine here (qca6174), except it crashes on >>> 5GHz network connection attempt as the one created from the window >>> drivers. >> >> Paste the crash register dump and `iw list` output, please. >> >> >> Michał > > Sorry for the late reply. > > Here's the iw list output: [...] > Band 1: > Capabilities: 0x19e3 > RX LDPC > HT20/HT40 > Static SM Power Save > RX HT20 SGI > RX HT40 SGI > TX STBC > RX STBC 1-stream > Max AMSDU length: 7935 bytes > DSSS/CCK HT40 > Maximum RX AMPDU length 65535 bytes (exponent: 0x003) > Minimum RX AMPDU time spacing: 8 usec (0x06) > HT TX/RX MCS rate indexes supported: 0-15 > VHT Capabilities (0x339031b2): > Max MPDU length: 11454 > Supported Channel Width: neither 160 nor 80+80 > RX LDPC > short GI (80 MHz) > TX STBC > SU Beamformee > MU Beamformee Is this with the change I suggested you earlier? I guess not. I don't think this firmware should advertise beamforming support. Can you re-try with patch from http://lists.infradead.org/pipermail/ath10k/2015-August/005774.html, please? If it still doesn't work please post `iw list` and the register dump. You can also try commenting out calls to ath10k_mac_vif_recalc_txbf() as plan B. [...] > Here's the register dump: > > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > firmware register dump: > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [00]: 0x05010000 0x000015B3 0x00939797 0x00955B31 > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [04]: 0x00939797 0x00060330 0x00000000 0x00000000 > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [08]: 0x00413980 0x0000FFFF 0x00000000 0x00000000 > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [12]: 0x00000009 0xFFFFFFFF 0x0096C09C 0x0096C0A7 > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [16]: 0x0096BDBC 0x009287BD 0x00000000 0x009287BD > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [20]: 0x40939797 0x0041A700 0x00407124 0x00000000 > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [24]: 0x8093D6C4 0x0041A760 0x004059D0 0xC0939797 > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [28]: 0x8094777F 0x0041A780 0x0046D5D8 0x00000001 > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [32]: 0x800AA427 0x0041A7B0 0x0046D5D8 0x00000001 > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [36]: 0x800AA58E 0x0041A7D0 0x00424824 0x00000001 > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [40]: 0x80994D90 0x0041A7F0 0x00424824 0x0041A838 > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [44]: 0x80996DC6 0x0041A820 0x0046F888 0x00412984 > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [48]: 0x800B43F5 0x0041A860 0x004222F8 0x00005008 > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [52]: 0x809A6ACC 0x0041A8F0 0x0042930C 0x0042CA24 > ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: > [56]: 0x809A6120 0x0041A930 0x0041A958 0x00427110 This definitely looks like a crash on TxBF configuration. Michał _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath10k: first qca6174 hw2.1 firmware released 2015-08-25 5:09 ` Michal Kazior @ 2015-08-25 14:04 ` Lapo Calamandrei 2015-08-26 5:01 ` Michal Kazior 0 siblings, 1 reply; 9+ messages in thread From: Lapo Calamandrei @ 2015-08-25 14:04 UTC (permalink / raw) To: Michal Kazior; +Cc: Kalle Valo, ath10k@lists.infradead.org 2015-08-25 7:09 GMT+02:00 Michal Kazior <michal.kazior@tieto.com>: > On 24 August 2015 at 18:26, Lapo Calamandrei <calamandrei@gmail.com> wrote: >> 2015-08-17 7:52 GMT+02:00 Michal Kazior <michal.kazior@tieto.com>: >>> On 13 August 2015 at 16:00, Lapo Calamandrei <calamandrei@gmail.com> wrote: >>>> 2015-08-13 12:31 GMT+02:00 Kalle Valo <kvalo@qca.qualcomm.com>: >>>>> Hi, >>>>> >>>>> I just pushed the first qca6174 hw2.1 firmware to ath10k-firmware.git: >>>>> >>>>> https://github.com/kvalo/ath10k-firmware/commit/7f7e7dda33676ced293de477b03711199ffe5256 >>>>> >>>>> Please test and provide feedback. >>>>> >>>>> -- >>>>> Kalle Valo >>>>> >>>> >>>> Loads w/o skip_otp and works fine here (qca6174), except it crashes on >>>> 5GHz network connection attempt as the one created from the window >>>> drivers. >>> >>> Paste the crash register dump and `iw list` output, please. >>> >>> >>> Michał >> >> Sorry for the late reply. >> >> Here's the iw list output: > [...] >> Band 1: >> Capabilities: 0x19e3 >> RX LDPC >> HT20/HT40 >> Static SM Power Save >> RX HT20 SGI >> RX HT40 SGI >> TX STBC >> RX STBC 1-stream >> Max AMSDU length: 7935 bytes >> DSSS/CCK HT40 >> Maximum RX AMPDU length 65535 bytes (exponent: 0x003) >> Minimum RX AMPDU time spacing: 8 usec (0x06) >> HT TX/RX MCS rate indexes supported: 0-15 >> VHT Capabilities (0x339031b2): >> Max MPDU length: 11454 >> Supported Channel Width: neither 160 nor 80+80 >> RX LDPC >> short GI (80 MHz) >> TX STBC >> SU Beamformee >> MU Beamformee > > Is this with the change I suggested you earlier? I guess not. I don't > think this firmware should advertise beamforming support. > > Can you re-try with patch from > http://lists.infradead.org/pipermail/ath10k/2015-August/005774.html, > please? If it still doesn't work please post `iw list` and the > register dump. > > You can also try commenting out calls to ath10k_mac_vif_recalc_txbf() as plan B. > > > [...] >> Here's the register dump: >> >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> firmware register dump: >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [00]: 0x05010000 0x000015B3 0x00939797 0x00955B31 >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [04]: 0x00939797 0x00060330 0x00000000 0x00000000 >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [08]: 0x00413980 0x0000FFFF 0x00000000 0x00000000 >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [12]: 0x00000009 0xFFFFFFFF 0x0096C09C 0x0096C0A7 >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [16]: 0x0096BDBC 0x009287BD 0x00000000 0x009287BD >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [20]: 0x40939797 0x0041A700 0x00407124 0x00000000 >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [24]: 0x8093D6C4 0x0041A760 0x004059D0 0xC0939797 >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [28]: 0x8094777F 0x0041A780 0x0046D5D8 0x00000001 >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [32]: 0x800AA427 0x0041A7B0 0x0046D5D8 0x00000001 >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [36]: 0x800AA58E 0x0041A7D0 0x00424824 0x00000001 >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [40]: 0x80994D90 0x0041A7F0 0x00424824 0x0041A838 >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [44]: 0x80996DC6 0x0041A820 0x0046F888 0x00412984 >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [48]: 0x800B43F5 0x0041A860 0x004222F8 0x00005008 >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [52]: 0x809A6ACC 0x0041A8F0 0x0042930C 0x0042CA24 >> ago 24 18:10:07 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: >> [56]: 0x809A6120 0x0041A930 0x0041A958 0x00427110 > > This definitely looks like a crash on TxBF configuration. > > > Michał Yep, the previous crash was without your patch applied, the following is with the patch applied though. iw list output: Wiphy phy0 max # scan SSIDs: 16 max scan IEs length: 195 bytes max # sched scan SSIDs: 0 max # match sets: 0 Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Device supports RSN-IBSS. Device supports AP-side u-APSD. Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x3 RX 0x3 Configured Antennas: TX 0x3 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * monitor * P2P-client * P2P-GO * P2P-device Band 1: Capabilities: 0x19e3 RX LDPC HT20/HT40 Static SM Power Save RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 VHT Capabilities (0x339011b2): Max MPDU length: 11454 Supported Channel Width: neither 160 nor 80+80 RX LDPC short GI (80 MHz) TX STBC SU Beamformee MU Beamformee RX antenna pattern consistency TX antenna pattern consistency VHT RX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT RX highest supported: 0 Mbps VHT TX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT TX highest supported: 0 Mbps Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) (no IR) * 2472 MHz [13] (20.0 dBm) (no IR) * 2484 MHz [14] (disabled) Band 2: Capabilities: 0x19e3 RX LDPC HT20/HT40 Static SM Power Save RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 VHT Capabilities (0x339011b2): Max MPDU length: 11454 Supported Channel Width: neither 160 nor 80+80 RX LDPC short GI (80 MHz) TX STBC SU Beamformee MU Beamformee RX antenna pattern consistency TX antenna pattern consistency VHT RX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT RX highest supported: 0 Mbps VHT TX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT TX highest supported: 0 Mbps Bitrates (non-HT): * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Frequencies: * 5180 MHz [36] (20.0 dBm) * 5200 MHz [40] (20.0 dBm) (no IR) * 5220 MHz [44] (20.0 dBm) (no IR) * 5240 MHz [48] (20.0 dBm) (no IR) * 5260 MHz [52] (20.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5280 MHz [56] (20.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5300 MHz [60] (20.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5320 MHz [64] (20.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5500 MHz [100] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5520 MHz [104] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5540 MHz [108] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5560 MHz [112] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5580 MHz [116] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5600 MHz [120] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5620 MHz [124] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5640 MHz [128] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5660 MHz [132] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5680 MHz [136] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5700 MHz [140] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 63 sec) DFS CAC time: 60000 ms * 5720 MHz [144] (disabled) * 5745 MHz [149] (disabled) * 5765 MHz [153] (disabled) * 5785 MHz [157] (disabled) * 5805 MHz [161] (disabled) * 5825 MHz [165] (disabled) Supported commands: * new_interface * set_interface * new_key * start_ap * new_station * new_mpath * set_mesh_config * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * frame * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * probe_client * set_noack_map * register_beacons * start_p2p_device * set_mcast_rate * channel_switch * set_qos_map * connect * disconnect Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * P2P-device: 0x40 0xd0 software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ managed } <= 2, #{ AP, P2P-client, P2P-GO } <= 2, #{ P2P-device } <= 1, total <= 4, #channels <= 1 * #{ managed } <= 2, #{ P2P-client } <= 2, #{ AP, P2P-GO } <= 1, #{ P2P-device } <= 1, total <= 4, #channels <= 2 * #{ managed } <= 1, #{ IBSS } <= 1, total <= 2, #channels <= 1 HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS. Device supports SAE with AUTHENTICATE command Device supports scan flush. Device supports per-vif TX power setting Driver supports a userspace MPM Driver/device bandwidth changes during BSS lifetime (AP/GO mode) Device supports static SMPS Device supports configuring vdev MAC-addr on create. Device supports VHT-IBSS. Register dump: ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [00]: 0x05010000 0x000015B3 0x00939797 0x00955B31 ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [04]: 0x00939797 0x00060330 0x00000000 0x00000000 ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [08]: 0x00413980 0x0000FFFF 0x00000000 0x00000000 ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [12]: 0x00000009 0xFFFFFFFF 0x0096C09C 0x0096C0A7 ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [16]: 0x0096BDBC 0x009287BD 0x00000000 0x00000000 ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [20]: 0x40939797 0x0041A700 0x00407124 0x00000000 ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [24]: 0x8093D6C4 0x0041A760 0x004059D0 0xC0939797 ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [28]: 0x8094777F 0x0041A780 0x0046D5D8 0x00000001 ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [32]: 0x800AA427 0x0041A7B0 0x0046D5D8 0x00000001 ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [36]: 0x800AA58E 0x0041A7D0 0x00424824 0x00000001 ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [40]: 0x80994D90 0x0041A7F0 0x00424824 0x0041A838 ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [44]: 0x80996DC6 0x0041A820 0x0046F888 0x00412984 ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [48]: 0x800B43F5 0x0041A860 0x004222F8 0x00005008 ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [52]: 0x809A6ACC 0x0041A8F0 0x0042930C 0x0042CA24 ago 25 15:57:53 localhost.localdomain kernel: ath10k_pci 0000:03:00.0: [56]: 0x809A6120 0x0041A930 0x0041A954 0x00427110 Ciao Lapo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath10k: first qca6174 hw2.1 firmware released 2015-08-25 14:04 ` Lapo Calamandrei @ 2015-08-26 5:01 ` Michal Kazior 2015-08-26 10:05 ` Lapo Calamandrei 0 siblings, 1 reply; 9+ messages in thread From: Michal Kazior @ 2015-08-26 5:01 UTC (permalink / raw) To: Lapo Calamandrei; +Cc: Kalle Valo, ath10k@lists.infradead.org On 25 August 2015 at 16:04, Lapo Calamandrei <calamandrei@gmail.com> wrote: [...] > Yep, the previous crash was without your patch applied, the following > is with the patch applied though. > > iw list output: [...] > Band 2: > Capabilities: 0x19e3 > RX LDPC > HT20/HT40 > Static SM Power Save > RX HT20 SGI > RX HT40 SGI > TX STBC > RX STBC 1-stream > Max AMSDU length: 7935 bytes > DSSS/CCK HT40 > Maximum RX AMPDU length 65535 bytes (exponent: 0x003) > Minimum RX AMPDU time spacing: 8 usec (0x06) > HT TX/RX MCS rate indexes supported: 0-15 > VHT Capabilities (0x339011b2): > Max MPDU length: 11454 > Supported Channel Width: neither 160 nor 80+80 > RX LDPC > short GI (80 MHz) > TX STBC > SU Beamformee > MU Beamformee [...] Sorry, my bad. The diff I provided earlier wasn't correct (it was a quick hack-idea I didn't test myself). The correct thing that should work is: --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -6798,27 +6798,14 @@ static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar) u32 val; int i; + ar->vht_cap_info &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | + IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE | + IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | + IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE); + vht_cap.vht_supported = 1; vht_cap.cap = ar->vht_cap_info; - if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | - IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) { - val = ar->num_rf_chains - 1; - val <<= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT; - val &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; - - vht_cap.cap |= val; - } - - if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | - IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) { - val = ar->num_rf_chains - 1; - val <<= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT; - val &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK; - - vht_cap.cap |= val; - } - mcs_map = 0; for (i = 0; i < 8; i++) { if (i < ar->num_rf_chains) Michał _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath10k: first qca6174 hw2.1 firmware released 2015-08-26 5:01 ` Michal Kazior @ 2015-08-26 10:05 ` Lapo Calamandrei 2015-08-26 10:12 ` Michal Kazior 0 siblings, 1 reply; 9+ messages in thread From: Lapo Calamandrei @ 2015-08-26 10:05 UTC (permalink / raw) To: Michal Kazior; +Cc: Kalle Valo, ath10k@lists.infradead.org 2015-08-26 7:01 GMT+02:00 Michal Kazior <michal.kazior@tieto.com>: > On 25 August 2015 at 16:04, Lapo Calamandrei <calamandrei@gmail.com> wrote: > [...] >> Yep, the previous crash was without your patch applied, the following >> is with the patch applied though. >> >> iw list output: > [...] >> Band 2: >> Capabilities: 0x19e3 >> RX LDPC >> HT20/HT40 >> Static SM Power Save >> RX HT20 SGI >> RX HT40 SGI >> TX STBC >> RX STBC 1-stream >> Max AMSDU length: 7935 bytes >> DSSS/CCK HT40 >> Maximum RX AMPDU length 65535 bytes (exponent: 0x003) >> Minimum RX AMPDU time spacing: 8 usec (0x06) >> HT TX/RX MCS rate indexes supported: 0-15 >> VHT Capabilities (0x339011b2): >> Max MPDU length: 11454 >> Supported Channel Width: neither 160 nor 80+80 >> RX LDPC >> short GI (80 MHz) >> TX STBC >> SU Beamformee >> MU Beamformee > [...] > > Sorry, my bad. The diff I provided earlier wasn't correct (it was a > quick hack-idea I didn't test myself). > > The correct thing that should work is: > > --- a/drivers/net/wireless/ath/ath10k/mac.c > +++ b/drivers/net/wireless/ath/ath10k/mac.c > @@ -6798,27 +6798,14 @@ static struct ieee80211_sta_vht_cap > ath10k_create_vht_cap(struct ath10k *ar) > u32 val; > int i; > > + ar->vht_cap_info &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | > + IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE | > + IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | > + IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE); > + > vht_cap.vht_supported = 1; > vht_cap.cap = ar->vht_cap_info; > > - if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | > - IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) { > - val = ar->num_rf_chains - 1; > - val <<= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT; > - val &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; > - > - vht_cap.cap |= val; > - } > - > - if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | > - IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) { > - val = ar->num_rf_chains - 1; > - val <<= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT; > - val &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK; > - > - vht_cap.cap |= val; > - } > - > mcs_map = 0; > for (i = 0; i < 8; i++) { > if (i < ar->num_rf_chains) > > > Michał The firmware crash is gone now, thanks. Do you need any kind of additional tests on this hw I can do? Ciao Lapo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath10k: first qca6174 hw2.1 firmware released 2015-08-26 10:05 ` Lapo Calamandrei @ 2015-08-26 10:12 ` Michal Kazior 0 siblings, 0 replies; 9+ messages in thread From: Michal Kazior @ 2015-08-26 10:12 UTC (permalink / raw) To: Lapo Calamandrei; +Cc: Kalle Valo, ath10k@lists.infradead.org On 26 August 2015 at 12:05, Lapo Calamandrei <calamandrei@gmail.com> wrote: > 2015-08-26 7:01 GMT+02:00 Michal Kazior <michal.kazior@tieto.com>: >> On 25 August 2015 at 16:04, Lapo Calamandrei <calamandrei@gmail.com> wrote: >> [...] >>> Yep, the previous crash was without your patch applied, the following >>> is with the patch applied though. >>> >>> iw list output: >> [...] >>> Band 2: >>> Capabilities: 0x19e3 >>> RX LDPC >>> HT20/HT40 >>> Static SM Power Save >>> RX HT20 SGI >>> RX HT40 SGI >>> TX STBC >>> RX STBC 1-stream >>> Max AMSDU length: 7935 bytes >>> DSSS/CCK HT40 >>> Maximum RX AMPDU length 65535 bytes (exponent: 0x003) >>> Minimum RX AMPDU time spacing: 8 usec (0x06) >>> HT TX/RX MCS rate indexes supported: 0-15 >>> VHT Capabilities (0x339011b2): >>> Max MPDU length: 11454 >>> Supported Channel Width: neither 160 nor 80+80 >>> RX LDPC >>> short GI (80 MHz) >>> TX STBC >>> SU Beamformee >>> MU Beamformee >> [...] >> >> Sorry, my bad. The diff I provided earlier wasn't correct (it was a >> quick hack-idea I didn't test myself). >> >> The correct thing that should work is: >> >> --- a/drivers/net/wireless/ath/ath10k/mac.c >> +++ b/drivers/net/wireless/ath/ath10k/mac.c >> @@ -6798,27 +6798,14 @@ static struct ieee80211_sta_vht_cap >> ath10k_create_vht_cap(struct ath10k *ar) >> u32 val; >> int i; >> >> + ar->vht_cap_info &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | >> + IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE | >> + IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | >> + IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE); >> + >> vht_cap.vht_supported = 1; >> vht_cap.cap = ar->vht_cap_info; >> >> - if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | >> - IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) { >> - val = ar->num_rf_chains - 1; >> - val <<= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT; >> - val &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; >> - >> - vht_cap.cap |= val; >> - } >> - >> - if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | >> - IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) { >> - val = ar->num_rf_chains - 1; >> - val <<= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT; >> - val &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK; >> - >> - vht_cap.cap |= val; >> - } >> - >> mcs_map = 0; >> for (i = 0; i < 8; i++) { >> if (i < ar->num_rf_chains) >> >> >> Michał > > The firmware crash is gone now, thanks. Awesome. Thanks for testing! > Do you need any kind of > additional tests on this hw I can do? No, thanks. Michał _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2015-08-26 10:12 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-08-13 10:31 ath10k: first qca6174 hw2.1 firmware released Kalle Valo 2015-08-13 14:00 ` Lapo Calamandrei 2015-08-17 5:52 ` Michal Kazior 2015-08-24 16:26 ` Lapo Calamandrei 2015-08-25 5:09 ` Michal Kazior 2015-08-25 14:04 ` Lapo Calamandrei 2015-08-26 5:01 ` Michal Kazior 2015-08-26 10:05 ` Lapo Calamandrei 2015-08-26 10:12 ` Michal Kazior
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox