Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board
@ 2026-02-03 15:36 Laurentiu Mihalcea
  2026-02-03 15:36 ` [Buildroot] [PATCH 01/10] package/freescale-imx: add i.MX95 support Laurentiu Mihalcea
                   ` (10 more replies)
  0 siblings, 11 replies; 16+ messages in thread
From: Laurentiu Mihalcea @ 2026-02-03 15:36 UTC (permalink / raw)
  To: buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Hi folks,

This series introduces support for NXP's IMX95-15x15-FRDM board.

So, a little bit about the board: as of today, the board hasn't been
officially launched, but, as far as I was told, this should happen in this
quarter. Because of this, we still have some gaps to fill in the
documentation (see missing links from the board's readme.txt).

Some hardware-related information for the board (not exhaustive):

  1) Based on MX95 15x15 B0 silicon.
  2) 8GB LPDDR4X DRAM
  3) 32GB eMMC
  4) 2 x ENET 1GBs

Some comments regarding the changes introduced by this series:

  1) imx-mkimage version bump was done because the board didn't seem
  to be able to boot using the previous version.

  2) firmware-ele-imx version bump was done because previous version
  didn't include the firmware for B0 revision (it only seemed to include
  the one for A0).

  3) MX95 series (as well as MX94) requires system manager (SM) and DDR
  OEI (perhaps even the TCM one if older silicon revision, but we don't
  handle that yet), which is why we have 2 new packages.

  4) LPDDR4x DDR FW handling seems to differ a bit from previous
  versions, thus the changes to the firmware-imx package.

Other than this, we have the DTS support already merged in linux-next via
[1] so hopefully we'll be able to transition to an upstream kernel soon.

[1]: https://lore.kernel.org/linux-devicetree/20260116-127-v3-0-3dc49545a745@nxp.com/

Thanks,
Laurentiu

Laurentiu Mihalcea (10):
  package/freescale-imx: add i.MX95 support
  board/freescale/common/imx/post-image.sh: add i.MX95 support
  package/freescale-imx/imx-sm: add SM package
  package/freescale-imx/imx-oei: add OEI package
  package/freescale-imx/firmware-ele-imx: bump to version 2.0.4
  package/freescale-imx/firmware-ele-imx: add i.MX95 B0 support
  package/freescale-imx/firmware-imx: support i.MX95's LPDDR4x FW
  package/imx-mkimage: bump to version lf-6.12.49-2.2.0
  board/freescale: add i.MX95 support
  configs/freescale_imx95_15x15_frdm: new defconfig

 DEVELOPERS                                    |  4 ++
 .../common/imx/imx95-bootloader-prepare.sh    | 60 ++++++++++++++++++
 board/freescale/common/imx/post-image.sh      |  2 +
 .../arm-trusted-firmware.hash                 |  2 +
 .../patches/linux-headers/linux-headers.hash  |  1 +
 .../imx95-15x15-frdm/patches/linux/linux.hash |  2 +
 .../imx95-15x15-frdm/patches/uboot/uboot.hash |  2 +
 board/freescale/imx95-15x15-frdm/readme.txt   | 63 +++++++++++++++++++
 configs/freescale_imx95_15x15_frdm_defconfig  | 37 +++++++++++
 package/freescale-imx/Config.in               | 23 ++++++-
 .../freescale-imx/firmware-ele-imx/Config.in  |  1 +
 .../firmware-ele-imx/firmware-ele-imx.hash    |  6 +-
 .../firmware-ele-imx/firmware-ele-imx.mk      |  4 +-
 package/freescale-imx/firmware-imx/Config.in  | 13 +++-
 .../firmware-imx/firmware-imx.mk              | 39 ++++++++++++
 package/freescale-imx/imx-oei/Config.in       | 21 +++++++
 package/freescale-imx/imx-oei/imx-oei.hash    |  4 ++
 package/freescale-imx/imx-oei/imx-oei.mk      | 29 +++++++++
 package/freescale-imx/imx-sm/Config.in        | 15 +++++
 package/freescale-imx/imx-sm/imx-sm.hash      |  4 ++
 package/freescale-imx/imx-sm/imx-sm.mk        | 33 ++++++++++
 package/imx-mkimage/imx-mkimage.hash          |  2 +-
 package/imx-mkimage/imx-mkimage.mk            |  2 +-
 23 files changed, 360 insertions(+), 9 deletions(-)
 create mode 100755 board/freescale/common/imx/imx95-bootloader-prepare.sh
 create mode 100644 board/freescale/imx95-15x15-frdm/patches/arm-trusted-firmware/arm-trusted-firmware.hash
 create mode 120000 board/freescale/imx95-15x15-frdm/patches/linux-headers/linux-headers.hash
 create mode 100644 board/freescale/imx95-15x15-frdm/patches/linux/linux.hash
 create mode 100644 board/freescale/imx95-15x15-frdm/patches/uboot/uboot.hash
 create mode 100644 board/freescale/imx95-15x15-frdm/readme.txt
 create mode 100644 configs/freescale_imx95_15x15_frdm_defconfig
 create mode 100644 package/freescale-imx/imx-oei/Config.in
 create mode 100644 package/freescale-imx/imx-oei/imx-oei.hash
 create mode 100644 package/freescale-imx/imx-oei/imx-oei.mk
 create mode 100644 package/freescale-imx/imx-sm/Config.in
 create mode 100644 package/freescale-imx/imx-sm/imx-sm.hash
 create mode 100644 package/freescale-imx/imx-sm/imx-sm.mk

-- 
2.43.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply	[flat|nested] 16+ messages in thread
* [Buildroot] [PATCH 01/10] package/freescale-imx: add i.MX95 support
  2026-02-03 15:36 [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Laurentiu Mihalcea
@ 2026-02-03 15:36 ` Laurentiu Mihalcea
  2026-11-11 21:50   ` Julien Olivain via buildroot
  2026-02-03 15:36 ` [Buildroot] [PATCH 02/10] board/freescale/common/imx/post-image.sh: " Laurentiu Mihalcea
                   ` (9 subsequent siblings)
  10 siblings, 1 reply; 16+ messages in thread
From: Laurentiu Mihalcea @ 2026-02-03 15:36 UTC (permalink / raw)
  To: buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Introduce support for the i.MX95 SoC, which has 3 revisions:
A0, A1, and B0. For now, this includes support solely for the B0
revision.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 package/freescale-imx/Config.in | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in
index 77d6547cec..c885b4fc23 100644
--- a/package/freescale-imx/Config.in
+++ b/package/freescale-imx/Config.in
@@ -70,6 +70,9 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX91
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX93
 	bool "imx93"
 
+config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX95
+	bool "imx95"
+
 endchoice
 
 choice
@@ -126,6 +129,21 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX93A1
 
 endchoice
 
+choice
+	prompt "i.MX95 Silicon Revision"
+	default BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX95B0
+	depends on BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX95
+	help
+	  Some packages related to the selected i.MX platform need to
+	  know the silicon revision of the platform they will run on.
+
+	  Note - mismatches may result in a failure to boot!
+
+config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX95B0
+	bool "imx95b0"
+
+endchoice
+
 config BR2_PACKAGE_FREESCALE_IMX_PLATFORM
 	string
 	default "IMX25_3STACK" if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX25_3STACK
@@ -178,7 +196,8 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_ELE
 	bool
 	default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8ULP || \
 		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX91 || \
-		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX93
+		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX93 || \
+		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX95
 
 config BR2_PACKAGE_FREESCALE_IMX_HAS_UPOWER
 	bool
-- 
2.43.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [Buildroot] [PATCH 02/10] board/freescale/common/imx/post-image.sh: add i.MX95 support
  2026-02-03 15:36 [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Laurentiu Mihalcea
  2026-02-03 15:36 ` [Buildroot] [PATCH 01/10] package/freescale-imx: add i.MX95 support Laurentiu Mihalcea
@ 2026-02-03 15:36 ` Laurentiu Mihalcea
  2026-02-03 15:36 ` [Buildroot] [PATCH 03/10] package/freescale-imx/imx-sm: add SM package Laurentiu Mihalcea
                   ` (8 subsequent siblings)
  10 siblings, 0 replies; 16+ messages in thread
From: Laurentiu Mihalcea @ 2026-02-03 15:36 UTC (permalink / raw)
  To: buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Add SD card image generation support for i.MX95. The layout should be the
same as i.MX93's, thus we utilize the same GENIMAGE configuration.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 board/freescale/common/imx/post-image.sh | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/board/freescale/common/imx/post-image.sh b/board/freescale/common/imx/post-image.sh
index 8d9bce5328..adf20d5e45 100755
--- a/board/freescale/common/imx/post-image.sh
+++ b/board/freescale/common/imx/post-image.sh
@@ -56,6 +56,8 @@ genimage_type()
 		echo "genimage.cfg.template_imx9"
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX93=y$" "${BR2_CONFIG}"; then
 		echo "genimage.cfg.template_imx9"
+	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX95=y$" "${BR2_CONFIG}"; then
+		echo "genimage.cfg.template_imx9"
 	elif grep -Eq "^BR2_LINUX_KERNEL_INSTALL_TARGET=y$" "${BR2_CONFIG}"; then
 		if grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" "${BR2_CONFIG}"; then
 		    echo "genimage.cfg.template_no_boot_part_spl"
-- 
2.43.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [Buildroot] [PATCH 03/10] package/freescale-imx/imx-sm: add SM package
  2026-02-03 15:36 [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Laurentiu Mihalcea
  2026-02-03 15:36 ` [Buildroot] [PATCH 01/10] package/freescale-imx: add i.MX95 support Laurentiu Mihalcea
  2026-02-03 15:36 ` [Buildroot] [PATCH 02/10] board/freescale/common/imx/post-image.sh: " Laurentiu Mihalcea
@ 2026-02-03 15:36 ` Laurentiu Mihalcea
  2026-02-03 15:36 ` [Buildroot] [PATCH 04/10] package/freescale-imx/imx-oei: add OEI package Laurentiu Mihalcea
                   ` (7 subsequent siblings)
  10 siblings, 0 replies; 16+ messages in thread
From: Laurentiu Mihalcea @ 2026-02-03 15:36 UTC (permalink / raw)
  To: buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Add System Manager (SM) package.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 DEVELOPERS                               |  3 +++
 package/freescale-imx/Config.in          |  1 +
 package/freescale-imx/imx-sm/Config.in   | 15 +++++++++++
 package/freescale-imx/imx-sm/imx-sm.hash |  4 +++
 package/freescale-imx/imx-sm/imx-sm.mk   | 33 ++++++++++++++++++++++++
 5 files changed, 56 insertions(+)
 create mode 100644 package/freescale-imx/imx-sm/Config.in
 create mode 100644 package/freescale-imx/imx-sm/imx-sm.hash
 create mode 100644 package/freescale-imx/imx-sm/imx-sm.mk

diff --git a/DEVELOPERS b/DEVELOPERS
index 08c98ec53b..a31458f9d7 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2111,6 +2111,9 @@ F:	package/open-lldp/
 N:	Laurent Vivier <laurent@vivier.eu>
 F:	package/petitboot/
 
+N:	Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>
+F:	package/freescale-imx/imx-sm/
+
 N:	Lee Jones <lee.jones@linaro.org>
 F:	boot/afboot-stm32/
 
diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in
index c885b4fc23..30c0d69970 100644
--- a/package/freescale-imx/Config.in
+++ b/package/freescale-imx/Config.in
@@ -218,6 +218,7 @@ source "package/freescale-imx/firmware-imx/Config.in"
 source "package/freescale-imx/firmware-upower/Config.in"
 source "package/freescale-imx/imx-sc-firmware/Config.in"
 source "package/freescale-imx/imx-seco/Config.in"
+source "package/freescale-imx/imx-sm/Config.in"
 source "package/freescale-imx/imx-vpu-hantro-daemon/Config.in"
 source "package/freescale-imx/imx-vpu-hantro-vc/Config.in"
 if (BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX51 || BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX53)
diff --git a/package/freescale-imx/imx-sm/Config.in b/package/freescale-imx/imx-sm/Config.in
new file mode 100644
index 0000000000..b06d797f99
--- /dev/null
+++ b/package/freescale-imx/imx-sm/Config.in
@@ -0,0 +1,15 @@
+config BR2_PACKAGE_IMX_SM
+	bool "imx-sm"
+	help
+	  imx-sm contains the source code for the System Manager (SM)
+	  firmware used on NXP SoCs such as MX95 and MX943.
+
+	  https://github.com/nxp-imx/imx-sm
+
+if BR2_PACKAGE_IMX_SM
+config BR2_PACKAGE_IMX_SM_CFG
+	string "Target configuration"
+	default "mx95evk"
+	help
+	  Which configuration to use in the build process.
+endif # BR2_PACKAGE_IMX_SM
diff --git a/package/freescale-imx/imx-sm/imx-sm.hash b/package/freescale-imx/imx-sm/imx-sm.hash
new file mode 100644
index 0000000000..b566c6047f
--- /dev/null
+++ b/package/freescale-imx/imx-sm/imx-sm.hash
@@ -0,0 +1,4 @@
+# Locally calculated
+sha256  3efe6a9e8b5f87cade9f2fe3116473d7629098487227da34c224a3846ee3aa51  imx-sm-lf-6.12.49-2.2.0.tar.gz
+sha256  ea2ae6b89b80c3c7cd0b4d0b86d84d927e1fc3e3ef81f65e6917162f13c78542  LICENSE.txt
+sha256  181f7f133c5b38874f0d3a41d9bbd03e724f8a8db864a403eeb40ccc19025775  SCR.txt
diff --git a/package/freescale-imx/imx-sm/imx-sm.mk b/package/freescale-imx/imx-sm/imx-sm.mk
new file mode 100644
index 0000000000..666a10be3c
--- /dev/null
+++ b/package/freescale-imx/imx-sm/imx-sm.mk
@@ -0,0 +1,33 @@
+################################################################################
+#
+# imx-sm
+#
+################################################################################
+
+IMX_SM_VERSION = lf-6.12.49-2.2.0
+IMX_SM_SITE = $(call github,nxp-imx,imx-sm,$(IMX_SM_VERSION))
+IMX_SM_LICENSE = BSD-3-Clause
+IMX_SM_LICENSE_FILES = LICENSE.txt SCR.txt
+
+IMX_SM_DEPENDENCIES += host-arm-gnu-toolchain
+
+IMX_SM_OUTPUT_BIN = m33_image.bin
+
+# note: we don't use the TOOLS variable here as recommended by the SM
+# documentation because buildroot adds the "host-" prefix to the
+# toolchain's directory name, which wouldn't work. Instead, we use
+# SM_CROSS_COMPILE, which is normally based on TOOLS.
+IMX_SM_MAKE_OPTS = \
+	SM_CROSS_COMPILE=$(HOST_DIR)/bin/arm-none-eabi-
+
+define IMX_SM_BUILD_CMDS
+	$(IMX_SM_MAKE_OPTS) $(MAKE) -C $(@D) config=$(BR2_PACKAGE_IMX_SM_CFG) cfg
+	$(IMX_SM_MAKE_OPTS) $(MAKE) -C $(@D) config=$(BR2_PACKAGE_IMX_SM_CFG) all
+endef
+
+# the output binary is used to build the boot container
+define IMX_SM_INSTALL_TARGET_CMDS
+	cp $(@D)/build/$(BR2_PACKAGE_IMX_SM_CFG)/$(IMX_SM_OUTPUT_BIN) $(BINARIES_DIR)/$(IMX_SM_OUTPUT_BIN)
+endef
+
+$(eval $(generic-package))
-- 
2.43.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [Buildroot] [PATCH 04/10] package/freescale-imx/imx-oei: add OEI package
  2026-02-03 15:36 [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Laurentiu Mihalcea
                   ` (2 preceding siblings ...)
  2026-02-03 15:36 ` [Buildroot] [PATCH 03/10] package/freescale-imx/imx-sm: add SM package Laurentiu Mihalcea
@ 2026-02-03 15:36 ` Laurentiu Mihalcea
  2026-02-03 15:36 ` [Buildroot] [PATCH 05/10] package/freescale-imx/firmware-ele-imx: bump to version 2.0.4 Laurentiu Mihalcea
                   ` (6 subsequent siblings)
  10 siblings, 0 replies; 16+ messages in thread
From: Laurentiu Mihalcea @ 2026-02-03 15:36 UTC (permalink / raw)
  To: buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Add Optional Executable Image (OEI) package.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 DEVELOPERS                                 |  1 +
 package/freescale-imx/Config.in            |  1 +
 package/freescale-imx/imx-oei/Config.in    | 21 ++++++++++++++++
 package/freescale-imx/imx-oei/imx-oei.hash |  4 +++
 package/freescale-imx/imx-oei/imx-oei.mk   | 29 ++++++++++++++++++++++
 5 files changed, 56 insertions(+)
 create mode 100644 package/freescale-imx/imx-oei/Config.in
 create mode 100644 package/freescale-imx/imx-oei/imx-oei.hash
 create mode 100644 package/freescale-imx/imx-oei/imx-oei.mk

diff --git a/DEVELOPERS b/DEVELOPERS
index a31458f9d7..a8a27e1498 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2112,6 +2112,7 @@ N:	Laurent Vivier <laurent@vivier.eu>
 F:	package/petitboot/
 
 N:	Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>
+F:	package/freescale-imx/imx-oei/
 F:	package/freescale-imx/imx-sm/
 
 N:	Lee Jones <lee.jones@linaro.org>
diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in
index 30c0d69970..dec6042f42 100644
--- a/package/freescale-imx/Config.in
+++ b/package/freescale-imx/Config.in
@@ -208,6 +208,7 @@ source "package/freescale-imx/imx-codec/Config.in"
 source "package/freescale-imx/imx-kobs/Config.in"
 source "package/freescale-imx/imx-lib/Config.in"
 source "package/freescale-imx/imx-m4fwloader/Config.in"
+source "package/freescale-imx/imx-oei/Config.in"
 source "package/freescale-imx/imx-parser/Config.in"
 source "package/freescale-imx/imx-uuc/Config.in"
 source "package/freescale-imx/imx-vpu/Config.in"
diff --git a/package/freescale-imx/imx-oei/Config.in b/package/freescale-imx/imx-oei/Config.in
new file mode 100644
index 0000000000..03ca091ddd
--- /dev/null
+++ b/package/freescale-imx/imx-oei/Config.in
@@ -0,0 +1,21 @@
+config BR2_PACKAGE_IMX_OEI
+	bool "imx-oei"
+	help
+	  imx-oei contains the source code for the Optional Executable
+	  Image (OEI), which is a piece of code executed by the boot CPU
+	  that initializes various aspects of the hardware
+	  (i.e. DDR, TCM).
+
+	  https://github.com/nxp-imx/imx-oei
+
+if BR2_PACKAGE_IMX_OEI
+config BR2_PACKAGE_IMX_OEI_TARGET_BOARD
+	string "Target board"
+	default "mx95lp5"
+	help
+	  Which board to build the OEI for.
+
+config BR2_PACKAGE_IMX_OEI_TARGET_REV
+	string
+	default "b0" if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX95B0
+endif # BR2_PACKAGE_IMX_OEI
diff --git a/package/freescale-imx/imx-oei/imx-oei.hash b/package/freescale-imx/imx-oei/imx-oei.hash
new file mode 100644
index 0000000000..8de2a2c756
--- /dev/null
+++ b/package/freescale-imx/imx-oei/imx-oei.hash
@@ -0,0 +1,4 @@
+# Locally calculated
+sha256  83e28f7e02321ed0ca6d0c4a83c85f8dbef564325b6232fcc9fa609bfdc45903  imx-oei-lf-6.12.49-2.2.0.tar.gz
+sha256  38e5f362f6141e65856fbfd9f3e0a1b75c897e58f08050186c6af0f6b23f6a3f  LICENSE.txt
+sha256  4f20bab3e1176bddb4ce8494fa3a12301fa243db755a549443fbbfd979a237e3  SCR.txt
diff --git a/package/freescale-imx/imx-oei/imx-oei.mk b/package/freescale-imx/imx-oei/imx-oei.mk
new file mode 100644
index 0000000000..d27919c473
--- /dev/null
+++ b/package/freescale-imx/imx-oei/imx-oei.mk
@@ -0,0 +1,29 @@
+################################################################################
+#
+# imx-oei
+#
+################################################################################
+
+IMX_OEI_VERSION = lf-6.12.49-2.2.0
+IMX_OEI_SITE = $(call github,nxp-imx,imx-oei,$(IMX_OEI_VERSION))
+IMX_OEI_LICENSE = BSD-3-Clause
+IMX_OEI_LICENSE_FILES = LICENSE.txt SCR.txt
+
+IMX_OEI_DEPENDENCIES += host-arm-gnu-toolchain
+
+# TODO: for now we only support OEI for DDR intialization
+IMX_OEI_OUTPUT_BIN = oei-m33-ddr.bin
+
+# no TOOLS variable - see rationale from imx-sm package
+IMX_OEI_MAKE_OPTS = \
+	OEI_CROSS_COMPILE=$(HOST_DIR)/bin/arm-none-eabi-
+
+define IMX_OEI_BUILD_CMDS
+	$(IMX_OEI_MAKE_OPTS) $(MAKE) -C $(@D) oei=ddr board=$(BR2_PACKAGE_IMX_OEI_TARGET_BOARD) r=$(BR2_PACKAGE_IMX_OEI_TARGET_REV)
+endef
+
+define IMX_OEI_INSTALL_TARGET_CMDS
+	cp $(@D)/build/$(BR2_PACKAGE_IMX_OEI_TARGET_BOARD)/ddr/$(IMX_OEI_OUTPUT_BIN) $(BINARIES_DIR)/$(IMX_OEI_OUTPUT_BIN)
+endef
+
+$(eval $(generic-package))
-- 
2.43.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [Buildroot] [PATCH 05/10] package/freescale-imx/firmware-ele-imx: bump to version 2.0.4
  2026-02-03 15:36 [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Laurentiu Mihalcea
                   ` (3 preceding siblings ...)
  2026-02-03 15:36 ` [Buildroot] [PATCH 04/10] package/freescale-imx/imx-oei: add OEI package Laurentiu Mihalcea
@ 2026-02-03 15:36 ` Laurentiu Mihalcea
  2026-02-03 15:36 ` [Buildroot] [PATCH 06/10] package/freescale-imx/firmware-ele-imx: add i.MX95 B0 support Laurentiu Mihalcea
                   ` (5 subsequent siblings)
  10 siblings, 0 replies; 16+ messages in thread
From: Laurentiu Mihalcea @ 2026-02-03 15:36 UTC (permalink / raw)
  To: buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

This version is aligned with NXP Linux BSP version "lf-6.12.49-2.2.0".
This is mostly needed because newer package versions also include the
ELE firmware for the i.MX95 B0 SoC.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 .../freescale-imx/firmware-ele-imx/firmware-ele-imx.hash    | 6 +++---
 package/freescale-imx/firmware-ele-imx/firmware-ele-imx.mk  | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/package/freescale-imx/firmware-ele-imx/firmware-ele-imx.hash b/package/freescale-imx/firmware-ele-imx/firmware-ele-imx.hash
index 55e1864e31..f064ef1830 100644
--- a/package/freescale-imx/firmware-ele-imx/firmware-ele-imx.hash
+++ b/package/freescale-imx/firmware-ele-imx/firmware-ele-imx.hash
@@ -1,5 +1,5 @@
 # Locally calculated
-sha256  a2f16e43e8aff9cf018d0962b70313940f77079b314331ab3980c4c5f44249cb  firmware-ele-imx-2.0.1-0a66c34.bin
-sha256  3f4a12c82a84bd1c3578c9c986d6371a61d3399525e76288ecbbae01daf0ae26  COPYING
-sha256  38f1408d6e935c564efd9119c313269e643c1a85cab1d930c3c5bd70bc261769  EULA
+sha256  c3ae4a1e1a41da441bd61483ef011ac24bf624aa6bad36f879b5dfa435647b4c  firmware-ele-imx-2.0.4-93492e0.bin
+sha256  3001cf84018c5cb10d183a678f6ec8a928c797616ba06b398d7ca93c0779aaa2  COPYING
+sha256  a829b109a0a406a6a2fec19975a332feca225098ce66bfab2220c6608db8fce5  EULA
 sha256  8721a617a5d4c7f366aaf857ebda21eb4c9fc9175dc92b70f627c611d403ec8e  SCR.txt
diff --git a/package/freescale-imx/firmware-ele-imx/firmware-ele-imx.mk b/package/freescale-imx/firmware-ele-imx/firmware-ele-imx.mk
index 8f25f4b5b5..a844ca0d94 100644
--- a/package/freescale-imx/firmware-ele-imx/firmware-ele-imx.mk
+++ b/package/freescale-imx/firmware-ele-imx/firmware-ele-imx.mk
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-FIRMWARE_ELE_IMX_VERSION = 2.0.1
-FIRMWARE_ELE_IMX_REVISION = 0a66c34
+FIRMWARE_ELE_IMX_VERSION = 2.0.4
+FIRMWARE_ELE_IMX_REVISION = 93492e0
 FIRMWARE_ELE_IMX_SITE = $(FREESCALE_IMX_SITE)
 FIRMWARE_ELE_IMX_SOURCE = firmware-ele-imx-$(FIRMWARE_ELE_IMX_VERSION)-$(FIRMWARE_ELE_IMX_REVISION).bin
 
-- 
2.43.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [Buildroot] [PATCH 06/10] package/freescale-imx/firmware-ele-imx: add i.MX95 B0 support
  2026-02-03 15:36 [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Laurentiu Mihalcea
                   ` (4 preceding siblings ...)
  2026-02-03 15:36 ` [Buildroot] [PATCH 05/10] package/freescale-imx/firmware-ele-imx: bump to version 2.0.4 Laurentiu Mihalcea
@ 2026-02-03 15:36 ` Laurentiu Mihalcea
  2026-02-03 15:36 ` [Buildroot] [PATCH 07/10] package/freescale-imx/firmware-imx: support i.MX95's LPDDR4x FW Laurentiu Mihalcea
                   ` (4 subsequent siblings)
  10 siblings, 0 replies; 16+ messages in thread
From: Laurentiu Mihalcea @ 2026-02-03 15:36 UTC (permalink / raw)
  To: buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Add support for i.MX95 B0 silicon. The ELE image for said revision is
called "mx95b0-ahab-container.img".

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 package/freescale-imx/firmware-ele-imx/Config.in | 1 +
 1 file changed, 1 insertion(+)

diff --git a/package/freescale-imx/firmware-ele-imx/Config.in b/package/freescale-imx/firmware-ele-imx/Config.in
index d8a55ed219..39d75a6eac 100644
--- a/package/freescale-imx/firmware-ele-imx/Config.in
+++ b/package/freescale-imx/firmware-ele-imx/Config.in
@@ -21,5 +21,6 @@ config BR2_PACKAGE_FIRMWARE_ELE_IMX_AHAB_CONTAINER_IMAGE
 	default "mx93a0-ahab-container.img" if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX93A0
 	default "mx93a1-ahab-container.img" if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX93A1
 	default "mx91a0-ahab-container.img" if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX91A0
+	default "mx95b0-ahab-container.img" if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX95B0
 
 endif # BR2_PACKAGE_FIRMWARE_ELE_IMX
-- 
2.43.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [Buildroot] [PATCH 07/10] package/freescale-imx/firmware-imx: support i.MX95's LPDDR4x FW
  2026-02-03 15:36 [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Laurentiu Mihalcea
                   ` (5 preceding siblings ...)
  2026-02-03 15:36 ` [Buildroot] [PATCH 06/10] package/freescale-imx/firmware-ele-imx: add i.MX95 B0 support Laurentiu Mihalcea
@ 2026-02-03 15:36 ` Laurentiu Mihalcea
  2026-02-03 15:36 ` [Buildroot] [PATCH 08/10] package/imx-mkimage: bump to version lf-6.12.49-2.2.0 Laurentiu Mihalcea
                   ` (3 subsequent siblings)
  10 siblings, 0 replies; 16+ messages in thread
From: Laurentiu Mihalcea @ 2026-02-03 15:36 UTC (permalink / raw)
  To: buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

The DDR FW for the i.MX95 SoC requires a different handling as opposed
to other SoCs. For now, only introduce support for LPDDR4x.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 package/freescale-imx/firmware-imx/Config.in  | 13 ++++++-
 .../firmware-imx/firmware-imx.mk              | 39 +++++++++++++++++++
 2 files changed, 51 insertions(+), 1 deletion(-)

diff --git a/package/freescale-imx/firmware-imx/Config.in b/package/freescale-imx/firmware-imx/Config.in
index 0acc235e0a..43c74e8bbe 100644
--- a/package/freescale-imx/firmware-imx/Config.in
+++ b/package/freescale-imx/firmware-imx/Config.in
@@ -57,12 +57,18 @@ config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW
 	default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN
 	default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MP
 
+config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX95
+	bool
+	default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX95
+
 config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9
 	bool
 	default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX91
 	default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX93
 
-if BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW || BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9
+if BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW || \
+	BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9 || \
+	BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX95
 
 choice
 	bool "DDR training binaries"
@@ -72,6 +78,11 @@ choice
 	  kind of memory that is available on the target board (DDR4,
 	  LPDDR4, etc...).
 
+config BR2_PACKAGE_FIRMWARE_IMX_LPDDR4X
+	bool "lpddr4x"
+	help
+	  Use LPDDR4x binaries.
+
 config BR2_PACKAGE_FIRMWARE_IMX_LPDDR4
 	bool "lpddr4"
 	help
diff --git a/package/freescale-imx/firmware-imx/firmware-imx.mk b/package/freescale-imx/firmware-imx/firmware-imx.mk
index f8c9df1cce..9682633ac3 100644
--- a/package/freescale-imx/firmware-imx/firmware-imx.mk
+++ b/package/freescale-imx/firmware-imx/firmware-imx.mk
@@ -46,6 +46,45 @@ ifneq ($(FIRMWARE_IMX_DDR_VERSION),)
 FIRMWARE_IMX_DDR_VERSION_SUFFIX = _$(FIRMWARE_IMX_DDR_VERSION)
 endif
 
+ifeq ($(BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX95),y)
+FIRMWARE_IMX_DDRFW_DIR = $(@D)/firmware/ddr/synopsys
+
+define FIRMWARE_IMX_GENERATE_DDR_HDR
+	wc -c $(FIRMWARE_IMX_DDRFW_DIR)/$(strip $(1)).bin | \
+	awk '{printf "%.8x", $$1}' | \
+	sed -e 's/\(..\)\(..\)\(..\)\(..\)/\4\3\2\1/' | \
+	xxd -r -p >  $(BINARIES_DIR)/$(strip $(3)).bin
+
+	wc -c $(FIRMWARE_IMX_DDRFW_DIR)/$(strip $(2)).bin | \
+	awk '{printf "%.8x", $$1}' | \
+	sed -e 's/\(..\)\(..\)\(..\)\(..\)/\4\3\2\1/' | \
+	xxd -r -p >>  $(BINARIES_DIR)/$(strip $(3)).bin
+endef
+
+define FIRMWARE_IMX_INSTALL_IMAGE_DDR_FW
+	$(call FIRMWARE_IMX_GENERATE_DDR_HDR, \
+		lpddr4x_imem_v202409,
+		lpddr4x_dmem_v202409,
+		fw-header)
+
+	$(call FIRMWARE_IMX_GENERATE_DDR_HDR, \
+		lpddr4x_imem_qb_v202409,
+		lpddr4x_dmem_qb_v202409,
+		fw-header-qb)
+
+	cat $(BINARIES_DIR)/fw-header.bin \
+	$(FIRMWARE_IMX_DDRFW_DIR)/lpddr4x_imem_v202409.bin \
+	$(FIRMWARE_IMX_DDRFW_DIR)/lpddr4x_dmem_v202409.bin \
+	$(BINARIES_DIR)/fw-header-qb.bin \
+	$(FIRMWARE_IMX_DDRFW_DIR)/lpddr4x_imem_qb_v202409.bin \
+	$(FIRMWARE_IMX_DDRFW_DIR)/lpddr4x_dmem_qb_v202409.bin > $(BINARIES_DIR)/ddr_fw.bin
+
+	rm -f $(BINARIES_DIR)/fw-header.bin
+	rm -f $(BINARIES_DIR)/fw-header-qb.bin
+endef
+
+endif
+
 ifeq ($(BR2_PACKAGE_FIRMWARE_IMX_NEEDS_DDR_FW_IMX9),y)
 FIRMWARE_IMX_DDRFW_DIR = $(@D)/firmware/ddr/synopsys
 
-- 
2.43.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [Buildroot] [PATCH 08/10] package/imx-mkimage: bump to version lf-6.12.49-2.2.0
  2026-02-03 15:36 [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Laurentiu Mihalcea
                   ` (6 preceding siblings ...)
  2026-02-03 15:36 ` [Buildroot] [PATCH 07/10] package/freescale-imx/firmware-imx: support i.MX95's LPDDR4x FW Laurentiu Mihalcea
@ 2026-02-03 15:36 ` Laurentiu Mihalcea
  2026-02-03 15:36 ` [Buildroot] [PATCH 09/10] board/freescale: add i.MX95 support Laurentiu Mihalcea
                   ` (2 subsequent siblings)
  10 siblings, 0 replies; 16+ messages in thread
From: Laurentiu Mihalcea @ 2026-02-03 15:36 UTC (permalink / raw)
  To: buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 package/imx-mkimage/imx-mkimage.hash | 2 +-
 package/imx-mkimage/imx-mkimage.mk   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/package/imx-mkimage/imx-mkimage.hash b/package/imx-mkimage/imx-mkimage.hash
index 02205def1e..4828c25eaf 100644
--- a/package/imx-mkimage/imx-mkimage.hash
+++ b/package/imx-mkimage/imx-mkimage.hash
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256  0a5654229c063e4e87b5d69f47a4a913ecee51f8a817ae2346a2a407e765ed3b  imx-mkimage-lf-6.6.23-2.0.0.tar.gz
+sha256  2b0ac561798b126959167efd767a7bed7e2cca39665a3201b340b77c91dd5c6d  imx-mkimage-lf-6.12.49-2.2.0.tar.gz
 sha256  231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c  LICENSE
diff --git a/package/imx-mkimage/imx-mkimage.mk b/package/imx-mkimage/imx-mkimage.mk
index f7396ba1b2..ac64b36ea7 100644
--- a/package/imx-mkimage/imx-mkimage.mk
+++ b/package/imx-mkimage/imx-mkimage.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-IMX_MKIMAGE_VERSION = lf-6.6.23-2.0.0
+IMX_MKIMAGE_VERSION = lf-6.12.49-2.2.0
 IMX_MKIMAGE_SITE = $(call github,nxp-imx,imx-mkimage,$(IMX_MKIMAGE_VERSION))
 IMX_MKIMAGE_LICENSE = GPL-2.0+
 IMX_MKIMAGE_LICENSE_FILES = LICENSE
-- 
2.43.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [Buildroot] [PATCH 09/10] board/freescale: add i.MX95 support
  2026-02-03 15:36 [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Laurentiu Mihalcea
                   ` (7 preceding siblings ...)
  2026-02-03 15:36 ` [Buildroot] [PATCH 08/10] package/imx-mkimage: bump to version lf-6.12.49-2.2.0 Laurentiu Mihalcea
@ 2026-02-03 15:36 ` Laurentiu Mihalcea
  2026-02-03 15:36 ` [Buildroot] [PATCH 10/10] configs/freescale_imx95_15x15_frdm: new defconfig Laurentiu Mihalcea
  2026-02-03 15:52 ` [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Sébastien Szymanski
  10 siblings, 0 replies; 16+ messages in thread
From: Laurentiu Mihalcea @ 2026-02-03 15:36 UTC (permalink / raw)
  To: buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Add support for i.MX95-based boards. The boot container build process
differs a bit from i.MX93, thus the addition of a new script. Most
notably, there's at least 2 new images to be included (i.e. SM and
DDR/TCM OEI).

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 .../common/imx/imx95-bootloader-prepare.sh    | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100755 board/freescale/common/imx/imx95-bootloader-prepare.sh

diff --git a/board/freescale/common/imx/imx95-bootloader-prepare.sh b/board/freescale/common/imx/imx95-bootloader-prepare.sh
new file mode 100755
index 0000000000..addd4bdea9
--- /dev/null
+++ b/board/freescale/common/imx/imx95-bootloader-prepare.sh
@@ -0,0 +1,60 @@
+#!/usr/bin/env bash
+
+# VERY IMPORTANT: a lot of this code here is hardcoded such that
+# it's able to generate a flash.bin equivalent to the one generated
+# by imx-mkimage by running:
+#
+#  make SOC=iMX95 OEI=YES LPDDR_TYPE=lpddr4x flash_a55
+#
+# As such, please be mindful of the fact that this script may not work
+# if you wish to change the make target or one of its parameters.
+#
+# TODO: improve this script such that it can handle multiple targets
+
+main ()
+{
+	CNTR_VERSION=2
+	ATF_LOAD_ADDR=0x8A200000
+	UBOOT_LOAD_ADDR=0x90200000
+	OEI_M33_ENTR_ADDR=0x1ffc0001
+	OEI_M33_LOAD_ADDR=0x1ffc0000
+	MCU_TCM_ADDR=0x1FFC0000
+	SPL_LOAD_ADDR_M33_VIEW=0x20480000
+	V2X_DDR=0x8b000000
+
+	# generate u-boot-hash.bin
+	"${HOST_DIR}/bin/mkimage_imx8" -commit > "${BINARIES_DIR}/mkimg.commit"
+	cat "${BINARIES_DIR}/u-boot.bin" "${BINARIES_DIR}/mkimg.commit" > "${BINARIES_DIR}/u-boot-hash.bin"
+	rm -f "${BINARIES_DIR}/mkimg.commit"
+
+	# generate u-boot-atf-container.img (TODO: no TEE support for now)
+	"${HOST_DIR}/bin/mkimage_imx8" -soc IMX9 -cntr_version ${CNTR_VERSION} -c \
+		-ap "${BINARIES_DIR}/bl31.bin" a55 ${ATF_LOAD_ADDR} \
+		-ap "${BINARIES_DIR}/u-boot-hash.bin" a55 ${UBOOT_LOAD_ADDR} \
+		-out "${BINARIES_DIR}/u-boot-atf-container.img"
+
+	# generate m33-oei-ddrfw.bin
+	dd if="${BINARIES_DIR}/oei-m33-ddr.bin" of="${BINARIES_DIR}/oei-m33-ddr.bin-pad" bs=4 conv=sync
+	cat "${BINARIES_DIR}/oei-m33-ddr.bin-pad" "${BINARIES_DIR}/ddr_fw.bin" > "${BINARIES_DIR}/m33-oei-ddrfw.bin.unaligned"
+	dd if="${BINARIES_DIR}/m33-oei-ddrfw.bin.unaligned" of="${BINARIES_DIR}/m33-oei-ddrfw.bin" bs=8 conv=sync
+	rm -f "${BINARIES_DIR}/m33-oei-ddrfw.bin.unaligned" "${BINARIES_DIR}/oei-m33-ddr.bin-pad"
+
+	# generate flash.bin
+	"${HOST_DIR}/bin/mkimage_imx8" -soc IMX9 -cntr_version ${CNTR_VERSION} \
+		-append "${BINARIES_DIR}/ahab-container.img" -c -ddr_dummy \
+		-oei "${BINARIES_DIR}/m33-oei-ddrfw.bin" m33 ${OEI_M33_ENTR_ADDR} ${OEI_M33_LOAD_ADDR} -hold 65536 \
+		-msel 0 \
+		-m33 "${BINARIES_DIR}/m33_image.bin" 0 ${MCU_TCM_ADDR} \
+		-ap "${BINARIES_DIR}/u-boot-spl.bin" a55 ${SPL_LOAD_ADDR_M33_VIEW} \
+		-dummy ${V2X_DDR} \
+		-out "${BINARIES_DIR}/imx9-boot-sd.bin"
+
+	# append u-boot-atf-container.img to flash.bin
+	flashbin_size="$(wc -c "${BINARIES_DIR}/imx9-boot-sd.bin" | awk '{print $1}')"
+	pad_cnt=$(($((flashbin_size + 0x400 - 1)) / 0x400))
+	dd if="${BINARIES_DIR}/u-boot-atf-container.img" of="${BINARIES_DIR}/imx9-boot-sd.bin" bs=1K seek=${pad_cnt}
+
+	exit $?
+}
+
+main "$@"
-- 
2.43.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* [Buildroot] [PATCH 10/10] configs/freescale_imx95_15x15_frdm: new defconfig
  2026-02-03 15:36 [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Laurentiu Mihalcea
                   ` (8 preceding siblings ...)
  2026-02-03 15:36 ` [Buildroot] [PATCH 09/10] board/freescale: add i.MX95 support Laurentiu Mihalcea
@ 2026-02-03 15:36 ` Laurentiu Mihalcea
  2026-02-03 15:52 ` [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Sébastien Szymanski
  10 siblings, 0 replies; 16+ messages in thread
From: Laurentiu Mihalcea @ 2026-02-03 15:36 UTC (permalink / raw)
  To: buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

Add defconfig for NXP's IMX95-15x15-FRDM board.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 .../arm-trusted-firmware.hash                 |  2 +
 .../patches/linux-headers/linux-headers.hash  |  1 +
 .../imx95-15x15-frdm/patches/linux/linux.hash |  2 +
 .../imx95-15x15-frdm/patches/uboot/uboot.hash |  2 +
 board/freescale/imx95-15x15-frdm/readme.txt   | 63 +++++++++++++++++++
 configs/freescale_imx95_15x15_frdm_defconfig  | 37 +++++++++++
 6 files changed, 107 insertions(+)
 create mode 100644 board/freescale/imx95-15x15-frdm/patches/arm-trusted-firmware/arm-trusted-firmware.hash
 create mode 120000 board/freescale/imx95-15x15-frdm/patches/linux-headers/linux-headers.hash
 create mode 100644 board/freescale/imx95-15x15-frdm/patches/linux/linux.hash
 create mode 100644 board/freescale/imx95-15x15-frdm/patches/uboot/uboot.hash
 create mode 100644 board/freescale/imx95-15x15-frdm/readme.txt
 create mode 100644 configs/freescale_imx95_15x15_frdm_defconfig

diff --git a/board/freescale/imx95-15x15-frdm/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/freescale/imx95-15x15-frdm/patches/arm-trusted-firmware/arm-trusted-firmware.hash
new file mode 100644
index 0000000000..e22710afce
--- /dev/null
+++ b/board/freescale/imx95-15x15-frdm/patches/arm-trusted-firmware/arm-trusted-firmware.hash
@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  2d68cdaa32240904a461dc0c0e475b7148f4447780379abc64c0a51bfe54446a  imx-atf-lf-6.12.49-2.2.0.tar.gz
diff --git a/board/freescale/imx95-15x15-frdm/patches/linux-headers/linux-headers.hash b/board/freescale/imx95-15x15-frdm/patches/linux-headers/linux-headers.hash
new file mode 120000
index 0000000000..5808d92afe
--- /dev/null
+++ b/board/freescale/imx95-15x15-frdm/patches/linux-headers/linux-headers.hash
@@ -0,0 +1 @@
+../linux/linux.hash
\ No newline at end of file
diff --git a/board/freescale/imx95-15x15-frdm/patches/linux/linux.hash b/board/freescale/imx95-15x15-frdm/patches/linux/linux.hash
new file mode 100644
index 0000000000..b138642633
--- /dev/null
+++ b/board/freescale/imx95-15x15-frdm/patches/linux/linux.hash
@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  2166d92e5631ee11bd249d492a1f4009c7635ee36b835fa55384b4ce41e8a63f  linux-imx-lf-6.12.49-2.2.0.tar.gz
diff --git a/board/freescale/imx95-15x15-frdm/patches/uboot/uboot.hash b/board/freescale/imx95-15x15-frdm/patches/uboot/uboot.hash
new file mode 100644
index 0000000000..5d57adfa22
--- /dev/null
+++ b/board/freescale/imx95-15x15-frdm/patches/uboot/uboot.hash
@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  212ea4d8d442153ab732ab724282fef64450e9dab5cfe9565eec4f618e305a80  uboot-imx-lf-6.12.49-2.2.0.tar.gz
diff --git a/board/freescale/imx95-15x15-frdm/readme.txt b/board/freescale/imx95-15x15-frdm/readme.txt
new file mode 100644
index 0000000000..97c92169ab
--- /dev/null
+++ b/board/freescale/imx95-15x15-frdm/readme.txt
@@ -0,0 +1,63 @@
+***************************
+NXP i.MX95 15x15 FRDM board
+***************************
+
+This file documents the Buildroot support for the i.MX95 15x15 FRDM board.
+
+Build
+=====
+
+First, configure Buildroot for the i.MX95 15x15 FRDM board:
+
+    make freescale_imx95_15x15_frdm_defconfig
+
+Build all components:
+
+    make
+
+When this command completes, the generated image containing everything
+to boot from the SD card is located in "output/images/sdcard.img".
+
+Create a bootable SD card
+=========================
+
+To determine the device associated with the SD card, have a look in the
+/proc/partitions file:
+
+    cat /proc/partitions
+
+Buildroot prepares a bootable "sdcard.img" image in the output/images/
+directory, ready to be dumped on an SD card. Launch the following
+command as root:
+
+    dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout, see the definition in
+board/freescale/common/imx/genimage.cfg.template_imx9.
+
+Boot the i.MX95 15x15 FRDM board
+================================
+
+To boot your newly created system (refer to the i.MX95 15x15 FRDM
+Documentation [TODO] for guidance):
+- insert the SD card in the SD slot of the board;
+- configure the boot switch as follows:
+  SW1: 11 SW1[1-2] ("USDHC2 4-bit SD3.0" Boot Mode)
+- connect a USB Type-C cable into the USB-DBG port and connect using
+  a terminal emulator at 115200 bps, 8n1;
+- power on the board by connecting a USB Type-C cable into the PWR IN
+  Power USB port.
+
+Note: the debug USB connector presents 4 UARTS (for example
+/dev/ttyACM[0-3]), the AP UART should be the first one (in the previous
+example, /dev/ttyACM0), while the SM UART should be the second one
+(in the previous example, /dev/ttyACM1).
+
+Enjoy!
+
+References
+==========
+
+TODO: update this section when NXP officially releases the board
diff --git a/configs/freescale_imx95_15x15_frdm_defconfig b/configs/freescale_imx95_15x15_frdm_defconfig
new file mode 100644
index 0000000000..3588759e56
--- /dev/null
+++ b/configs/freescale_imx95_15x15_frdm_defconfig
@@ -0,0 +1,37 @@
+BR2_aarch64=y
+BR2_cortex_a55=y
+BR2_GLOBAL_PATCH_DIR="board/freescale/imx95-15x15-frdm/patches"
+BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
+BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX95=y
+BR2_PACKAGE_FREESCALE_IMX=y
+BR2_PACKAGE_FIRMWARE_IMX=y
+BR2_PACKAGE_FIRMWARE_IMX_LPDDR4X=y
+BR2_PACKAGE_IMX_SM=y
+BR2_PACKAGE_IMX_OEI=y
+BR2_PACKAGE_IMX_OEI_TARGET_BOARD="mx95lp4x-15"
+BR2_PACKAGE_FIRMWARE_ELE_IMX=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,imx-atf,lf-6.12.49-2.2.0)/imx-atf-lf-6.12.49-2.2.0.tar.gz"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx95"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.12.49-2.2.0)/uboot-imx-lf-6.12.49-2.2.0.tar.gz"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx95_15x15_frdm"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_PACKAGE_HOST_IMX_MKIMAGE=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/imx95-bootloader-prepare.sh board/freescale/common/imx/post-image.sh"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,linux-imx,lf-6.12.49-2.2.0)/linux-imx-lf-6.12.49-2.2.0.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v8"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx95-15x15-frdm"
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_TARGET_ROOTFS_EXT2=y
-- 
2.43.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply related	[flat|nested] 16+ messages in thread
* Re: [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board
  2026-02-03 15:36 [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Laurentiu Mihalcea
                   ` (9 preceding siblings ...)
  2026-02-03 15:36 ` [Buildroot] [PATCH 10/10] configs/freescale_imx95_15x15_frdm: new defconfig Laurentiu Mihalcea
@ 2026-02-03 15:52 ` Sébastien Szymanski
  2026-02-03 16:40   ` Laurentiu Mihalcea
  10 siblings, 1 reply; 16+ messages in thread
From: Sébastien Szymanski @ 2026-02-03 15:52 UTC (permalink / raw)
  To: Laurentiu Mihalcea, buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam

Hello Laurentiu, all,

On 2/3/26 4:36 PM, Laurentiu Mihalcea wrote:
> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
> 
> Hi folks,
> 
> This series introduces support for NXP's IMX95-15x15-FRDM board.

Nice! I was working on adding i.MX95 too and just saw your patches! I 
will try you patches then!

> 
> So, a little bit about the board: as of today, the board hasn't been
> officially launched, but, as far as I was told, this should happen in this
> quarter. Because of this, we still have some gaps to fill in the
> documentation (see missing links from the board's readme.txt).
> 
> Some hardware-related information for the board (not exhaustive):
> 
>    1) Based on MX95 15x15 B0 silicon.
>    2) 8GB LPDDR4X DRAM
>    3) 32GB eMMC
>    4) 2 x ENET 1GBs
> 
> Some comments regarding the changes introduced by this series:
> 
>    1) imx-mkimage version bump was done because the board didn't seem
>    to be able to boot using the previous version.
> 
>    2) firmware-ele-imx version bump was done because previous version
>    didn't include the firmware for B0 revision (it only seemed to include
>    the one for A0).

I have sent patches to bump several i.MX packages:

https://lore.kernel.org/buildroot/20260203-bump-imx-packages-lf-6-12-49-2-2-0-v1-1-548f3fc77a59@armadeus.com/

Regards,

> 
>    3) MX95 series (as well as MX94) requires system manager (SM) and DDR
>    OEI (perhaps even the TCM one if older silicon revision, but we don't
>    handle that yet), which is why we have 2 new packages.
> 
>    4) LPDDR4x DDR FW handling seems to differ a bit from previous
>    versions, thus the changes to the firmware-imx package.
> 
> Other than this, we have the DTS support already merged in linux-next via
> [1] so hopefully we'll be able to transition to an upstream kernel soon.
> 
> [1]: https://lore.kernel.org/linux-devicetree/20260116-127-v3-0-3dc49545a745@nxp.com/
> 
> Thanks,
> Laurentiu
> 
> Laurentiu Mihalcea (10):
>    package/freescale-imx: add i.MX95 support
>    board/freescale/common/imx/post-image.sh: add i.MX95 support
>    package/freescale-imx/imx-sm: add SM package
>    package/freescale-imx/imx-oei: add OEI package
>    package/freescale-imx/firmware-ele-imx: bump to version 2.0.4
>    package/freescale-imx/firmware-ele-imx: add i.MX95 B0 support
>    package/freescale-imx/firmware-imx: support i.MX95's LPDDR4x FW
>    package/imx-mkimage: bump to version lf-6.12.49-2.2.0
>    board/freescale: add i.MX95 support
>    configs/freescale_imx95_15x15_frdm: new defconfig
> 
>   DEVELOPERS                                    |  4 ++
>   .../common/imx/imx95-bootloader-prepare.sh    | 60 ++++++++++++++++++
>   board/freescale/common/imx/post-image.sh      |  2 +
>   .../arm-trusted-firmware.hash                 |  2 +
>   .../patches/linux-headers/linux-headers.hash  |  1 +
>   .../imx95-15x15-frdm/patches/linux/linux.hash |  2 +
>   .../imx95-15x15-frdm/patches/uboot/uboot.hash |  2 +
>   board/freescale/imx95-15x15-frdm/readme.txt   | 63 +++++++++++++++++++
>   configs/freescale_imx95_15x15_frdm_defconfig  | 37 +++++++++++
>   package/freescale-imx/Config.in               | 23 ++++++-
>   .../freescale-imx/firmware-ele-imx/Config.in  |  1 +
>   .../firmware-ele-imx/firmware-ele-imx.hash    |  6 +-
>   .../firmware-ele-imx/firmware-ele-imx.mk      |  4 +-
>   package/freescale-imx/firmware-imx/Config.in  | 13 +++-
>   .../firmware-imx/firmware-imx.mk              | 39 ++++++++++++
>   package/freescale-imx/imx-oei/Config.in       | 21 +++++++
>   package/freescale-imx/imx-oei/imx-oei.hash    |  4 ++
>   package/freescale-imx/imx-oei/imx-oei.mk      | 29 +++++++++
>   package/freescale-imx/imx-sm/Config.in        | 15 +++++
>   package/freescale-imx/imx-sm/imx-sm.hash      |  4 ++
>   package/freescale-imx/imx-sm/imx-sm.mk        | 33 ++++++++++
>   package/imx-mkimage/imx-mkimage.hash          |  2 +-
>   package/imx-mkimage/imx-mkimage.mk            |  2 +-
>   23 files changed, 360 insertions(+), 9 deletions(-)
>   create mode 100755 board/freescale/common/imx/imx95-bootloader-prepare.sh
>   create mode 100644 board/freescale/imx95-15x15-frdm/patches/arm-trusted-firmware/arm-trusted-firmware.hash
>   create mode 120000 board/freescale/imx95-15x15-frdm/patches/linux-headers/linux-headers.hash
>   create mode 100644 board/freescale/imx95-15x15-frdm/patches/linux/linux.hash
>   create mode 100644 board/freescale/imx95-15x15-frdm/patches/uboot/uboot.hash
>   create mode 100644 board/freescale/imx95-15x15-frdm/readme.txt
>   create mode 100644 configs/freescale_imx95_15x15_frdm_defconfig
>   create mode 100644 package/freescale-imx/imx-oei/Config.in
>   create mode 100644 package/freescale-imx/imx-oei/imx-oei.hash
>   create mode 100644 package/freescale-imx/imx-oei/imx-oei.mk
>   create mode 100644 package/freescale-imx/imx-sm/Config.in
>   create mode 100644 package/freescale-imx/imx-sm/imx-sm.hash
>   create mode 100644 package/freescale-imx/imx-sm/imx-sm.mk
> 


-- 
Sébastien Szymanski, Armadeus Systems
Software engineer
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply	[flat|nested] 16+ messages in thread
* Re: [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board
  2026-02-03 15:52 ` [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Sébastien Szymanski
@ 2026-02-03 16:40   ` Laurentiu Mihalcea
  2026-02-05 13:28     ` Sébastien Szymanski
  0 siblings, 1 reply; 16+ messages in thread
From: Laurentiu Mihalcea @ 2026-02-03 16:40 UTC (permalink / raw)
  To: Sébastien Szymanski, buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam


On 2/3/2026 5:52 PM, Sébastien Szymanski wrote:
> Hello Laurentiu, all,
>
> On 2/3/26 4:36 PM, Laurentiu Mihalcea wrote:
>> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>>
>> Hi folks,
>>
>> This series introduces support for NXP's IMX95-15x15-FRDM board.
>
> Nice! I was working on adding i.MX95 too and just saw your patches! I will try you patches then!


Thanks, let me know if you have any feedback :)


>
>>
>> So, a little bit about the board: as of today, the board hasn't been
>> officially launched, but, as far as I was told, this should happen in this
>> quarter. Because of this, we still have some gaps to fill in the
>> documentation (see missing links from the board's readme.txt).
>>
>> Some hardware-related information for the board (not exhaustive):
>>
>>    1) Based on MX95 15x15 B0 silicon.
>>    2) 8GB LPDDR4X DRAM
>>    3) 32GB eMMC
>>    4) 2 x ENET 1GBs
>>
>> Some comments regarding the changes introduced by this series:
>>
>>    1) imx-mkimage version bump was done because the board didn't seem
>>    to be able to boot using the previous version.
>>
>>    2) firmware-ele-imx version bump was done because previous version
>>    didn't include the firmware for B0 revision (it only seemed to include
>>    the one for A0).
>
> I have sent patches to bump several i.MX packages:
>
> https://lore.kernel.org/buildroot/20260203-bump-imx-packages-lf-6-12-49-2-2-0-v1-1-548f3fc77a59@armadeus.com/
>
> Regards, 


Ah, very sorry for the duplication. Your patches should be all the bumps we need.

Will drop the updates from this series once yours lands.


Thanks,

Laurentiu

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply	[flat|nested] 16+ messages in thread
* Re: [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board
  2026-02-03 16:40   ` Laurentiu Mihalcea
@ 2026-02-05 13:28     ` Sébastien Szymanski
  2026-02-05 13:50       ` Laurentiu Mihalcea
  0 siblings, 1 reply; 16+ messages in thread
From: Sébastien Szymanski @ 2026-02-05 13:28 UTC (permalink / raw)
  To: Laurentiu Mihalcea, buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam

Hello Laurentiu, all,

On 2/3/26 5:40 PM, Laurentiu Mihalcea wrote:
> 
> On 2/3/2026 5:52 PM, Sébastien Szymanski wrote:
>> Hello Laurentiu, all,
>>
>> On 2/3/26 4:36 PM, Laurentiu Mihalcea wrote:
>>> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>>>
>>> Hi folks,
>>>
>>> This series introduces support for NXP's IMX95-15x15-FRDM board.
>>
>> Nice! I was working on adding i.MX95 too and just saw your patches! I will try you patches then!
> 
> 
> Thanks, let me know if you have any feedback :)

I was hoping to be able to test your patches on my MX95LP4XEVK-15 but it 
has an iMX95 A1 :/ It looks like the latest release (LF6.12.49-2.2.0) 
only supports B0, right ?

Regards,

> 
> 
>>
>>>
>>> So, a little bit about the board: as of today, the board hasn't been
>>> officially launched, but, as far as I was told, this should happen in this
>>> quarter. Because of this, we still have some gaps to fill in the
>>> documentation (see missing links from the board's readme.txt).
>>>
>>> Some hardware-related information for the board (not exhaustive):
>>>
>>>     1) Based on MX95 15x15 B0 silicon.
>>>     2) 8GB LPDDR4X DRAM
>>>     3) 32GB eMMC
>>>     4) 2 x ENET 1GBs
>>>
>>> Some comments regarding the changes introduced by this series:
>>>
>>>     1) imx-mkimage version bump was done because the board didn't seem
>>>     to be able to boot using the previous version.
>>>
>>>     2) firmware-ele-imx version bump was done because previous version
>>>     didn't include the firmware for B0 revision (it only seemed to include
>>>     the one for A0).
>>
>> I have sent patches to bump several i.MX packages:
>>
>> https://lore.kernel.org/buildroot/20260203-bump-imx-packages-lf-6-12-49-2-2-0-v1-1-548f3fc77a59@armadeus.com/
>>
>> Regards,
> 
> 
> Ah, very sorry for the duplication. Your patches should be all the bumps we need.
> 
> Will drop the updates from this series once yours lands.
> 
> 
> Thanks,
> 
> Laurentiu
> 


-- 
Sébastien Szymanski, Armadeus Systems
Software engineer
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply	[flat|nested] 16+ messages in thread
* Re: [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board
  2026-02-05 13:28     ` Sébastien Szymanski
@ 2026-02-05 13:50       ` Laurentiu Mihalcea
  0 siblings, 0 replies; 16+ messages in thread
From: Laurentiu Mihalcea @ 2026-02-05 13:50 UTC (permalink / raw)
  To: Sébastien Szymanski, buildroot
  Cc: Gary Bisson, Refik Tuzakli, Erik Larsson, Thomas Petazzoni,
	Fabio Estevam



On 2/5/2026 5:28 AM, Sébastien Szymanski wrote:
> Hello Laurentiu, all,
> 
> On 2/3/26 5:40 PM, Laurentiu Mihalcea wrote:
>>
>> On 2/3/2026 5:52 PM, Sébastien Szymanski wrote:
>>> Hello Laurentiu, all,
>>>
>>> On 2/3/26 4:36 PM, Laurentiu Mihalcea wrote:
>>>> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>>>>
>>>> Hi folks,
>>>>
>>>> This series introduces support for NXP's IMX95-15x15-FRDM board.
>>>
>>> Nice! I was working on adding i.MX95 too and just saw your patches! I will try you patches then!
>>
>>
>> Thanks, let me know if you have any feedback :)
> 
> I was hoping to be able to test your patches on my MX95LP4XEVK-15 but it has an iMX95 A1 :/ It looks like the latest release (LF6.12.49-2.2.0) only supports B0, right ?
> 
> Regards,


Hey Sebastien,

Can you please try using the firmware (OEI and ELE) for A0 revision?
I think these should be the only binaries requiring a SOC revision.

I believe there's no difference between the two revisions w.r.t OEI/ELE
which is why there's no firmware binaries, but perhaps I'm wrong?

Unfortunately, I don't have an MX95LP4XEVK-15 w/ A1 on hand so I can't
test this myself :(

Thanks,
Laurentiu


_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply	[flat|nested] 16+ messages in thread
* Re: [Buildroot] [PATCH 01/10] package/freescale-imx: add i.MX95 support
  2026-02-03 15:36 ` [Buildroot] [PATCH 01/10] package/freescale-imx: add i.MX95 support Laurentiu Mihalcea
@ 2026-11-11 21:50   ` Julien Olivain via buildroot
  0 siblings, 0 replies; 16+ messages in thread
From: Julien Olivain via buildroot @ 2026-11-11 21:50 UTC (permalink / raw)
  To: Laurentiu Mihalcea
  Cc: buildroot, Gary Bisson, Refik Tuzakli, Erik Larsson,
	Thomas Petazzoni, Fabio Estevam

Hi Laurentiu,

On 03/02/2026 16:36, Laurentiu Mihalcea wrote:
> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
> 
> Introduce support for the i.MX95 SoC, which has 3 revisions:
> A0, A1, and B0. For now, this includes support solely for the B0
> revision.
> 
> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

After some rework, I applied this series to master, thanks.
For the details of my changes, see:
https://gitlab.com/buildroot.org/buildroot/-/commits/dc10246725957f68dfea7a47a2d3b1726567452f

Best regards,

Julien.
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply	[flat|nested] 16+ messages in thread
end of thread, other threads:[~2026-11-11 21:50 UTC | newest]

Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-02-03 15:36 [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Laurentiu Mihalcea
2026-02-03 15:36 ` [Buildroot] [PATCH 01/10] package/freescale-imx: add i.MX95 support Laurentiu Mihalcea
2026-11-11 21:50   ` Julien Olivain via buildroot
2026-02-03 15:36 ` [Buildroot] [PATCH 02/10] board/freescale/common/imx/post-image.sh: " Laurentiu Mihalcea
2026-02-03 15:36 ` [Buildroot] [PATCH 03/10] package/freescale-imx/imx-sm: add SM package Laurentiu Mihalcea
2026-02-03 15:36 ` [Buildroot] [PATCH 04/10] package/freescale-imx/imx-oei: add OEI package Laurentiu Mihalcea
2026-02-03 15:36 ` [Buildroot] [PATCH 05/10] package/freescale-imx/firmware-ele-imx: bump to version 2.0.4 Laurentiu Mihalcea
2026-02-03 15:36 ` [Buildroot] [PATCH 06/10] package/freescale-imx/firmware-ele-imx: add i.MX95 B0 support Laurentiu Mihalcea
2026-02-03 15:36 ` [Buildroot] [PATCH 07/10] package/freescale-imx/firmware-imx: support i.MX95's LPDDR4x FW Laurentiu Mihalcea
2026-02-03 15:36 ` [Buildroot] [PATCH 08/10] package/imx-mkimage: bump to version lf-6.12.49-2.2.0 Laurentiu Mihalcea
2026-02-03 15:36 ` [Buildroot] [PATCH 09/10] board/freescale: add i.MX95 support Laurentiu Mihalcea
2026-02-03 15:36 ` [Buildroot] [PATCH 10/10] configs/freescale_imx95_15x15_frdm: new defconfig Laurentiu Mihalcea
2026-02-03 15:52 ` [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board Sébastien Szymanski
2026-02-03 16:40   ` Laurentiu Mihalcea
2026-02-05 13:28     ` Sébastien Szymanski
2026-02-05 13:50       ` Laurentiu Mihalcea

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox