* [Buildroot] [PATCH] fix broken path in arm_toolchain_defconfig
@ 2010-05-14 8:12 Chih-Min Chao
2010-05-19 11:34 ` Thomas Petazzoni
0 siblings, 1 reply; 5+ messages in thread
From: Chih-Min Chao @ 2010-05-14 8:12 UTC (permalink / raw)
To: buildroot
The path of device_table.txt in arm_toolchain_defconfig is broken.
The patch fix it and use target/generic/device_table.txt as default setting
Please see the attached
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100514/16ccf5a8/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: arm_toolchain_defconfig.patch
Type: text/x-patch
Size: 688 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100514/16ccf5a8/attachment.bin>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] fix broken path in arm_toolchain_defconfig
2010-05-14 8:12 [Buildroot] [PATCH] fix broken path in arm_toolchain_defconfig Chih-Min Chao
@ 2010-05-19 11:34 ` Thomas Petazzoni
2010-05-21 7:12 ` Chih-Min Chao
0 siblings, 1 reply; 5+ messages in thread
From: Thomas Petazzoni @ 2010-05-19 11:34 UTC (permalink / raw)
To: buildroot
On Fri, 14 May 2010 16:12:05 +0800
Chih-Min Chao <cmchao@gmail.com> wrote:
> The path of device_table.txt in arm_toolchain_defconfig is broken.
> The patch fix it and use target/generic/device_table.txt as default setting
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
You forgot the Signed-off-by line in the commit log, however.
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] fix broken path in arm_toolchain_defconfig
2010-05-19 11:34 ` Thomas Petazzoni
@ 2010-05-21 7:12 ` Chih-Min Chao
2010-05-21 7:48 ` Thomas Petazzoni
2010-05-22 20:08 ` Peter Korsgaard
0 siblings, 2 replies; 5+ messages in thread
From: Chih-Min Chao @ 2010-05-21 7:12 UTC (permalink / raw)
To: buildroot
On Wed, May 19, 2010 at 7:34 PM, Thomas Petazzoni <
thomas.petazzoni@free-electrons.com> wrote:
> On Fri, 14 May 2010 16:12:05 +0800
> Chih-Min Chao <cmchao@gmail.com> wrote:
>
> > The path of device_table.txt in arm_toolchain_defconfig is broken.
> > The patch fix it and use target/generic/device_table.txt as default
> setting
>
> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>
> You forgot the Signed-off-by line in the commit log, however.
> Thomas
>
So, should I generate the patch by "git format-patch --signoff
revision_range" ??
If the answer is yes, the attached is the reformat patch with sign-off-by
information
> --
> Thomas Petazzoni, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100521/43b03fe3/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-fix-device_table.txt-path-in-arm_toolchain_defconfig.patch
Type: text/x-patch
Size: 873 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100521/43b03fe3/attachment.bin>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] fix broken path in arm_toolchain_defconfig
2010-05-21 7:12 ` Chih-Min Chao
@ 2010-05-21 7:48 ` Thomas Petazzoni
2010-05-22 20:08 ` Peter Korsgaard
1 sibling, 0 replies; 5+ messages in thread
From: Thomas Petazzoni @ 2010-05-21 7:48 UTC (permalink / raw)
To: buildroot
On Fri, 21 May 2010 15:12:13 +0800
Chih-Min Chao <cmchao@gmail.com> wrote:
> So, should I generate the patch by "git format-patch --signoff
> revision_range" ??
It is usually at commit time that the signed-off line is added, by
doing :
git commit -s
instead of just
git commit
Typical very basic work-flow :
# Assuming you are on master
# Create a new branch for your work and switch to this branch
git checkout -b mywork
# Hack hack hack
# Commit your work (supposing you want to all changes in a single
# commit, which may or may not be appropriate)
git commit -a -s
# Format the patch (or patches)
git format-patch master
# Send the patch
git send-email --to buildroot at uclibc.org *.patch
Regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] fix broken path in arm_toolchain_defconfig
2010-05-21 7:12 ` Chih-Min Chao
2010-05-21 7:48 ` Thomas Petazzoni
@ 2010-05-22 20:08 ` Peter Korsgaard
1 sibling, 0 replies; 5+ messages in thread
From: Peter Korsgaard @ 2010-05-22 20:08 UTC (permalink / raw)
To: buildroot
>>>>> "Chih-Min" == Chih-Min Chao <cmchao@gmail.com> writes:
Chih-Min> So, should I generate the patch by "git format-patch --signoff? revision_range"
Chih-Min> ??
Chih-Min> If the answer is yes, the attached is the reformat patch with sign-off-by
Chih-Min> information
Committed, thanks!
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-05-22 20:08 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-14 8:12 [Buildroot] [PATCH] fix broken path in arm_toolchain_defconfig Chih-Min Chao
2010-05-19 11:34 ` Thomas Petazzoni
2010-05-21 7:12 ` Chih-Min Chao
2010-05-21 7:48 ` Thomas Petazzoni
2010-05-22 20:08 ` Peter Korsgaard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox