* [Buildroot] [PATCH v1 1/1] Openpowerlink: new package [not found] <1103454476.7313953.1379758391823.JavaMail.root@openwide.fr> @ 2013-09-21 10:20 ` Romain Naour 2013-09-22 13:50 ` Thomas Petazzoni 2013-09-24 15:24 ` Thomas De Schampheleire 0 siblings, 2 replies; 4+ messages in thread From: Romain Naour @ 2013-09-21 10:20 UTC (permalink / raw) To: buildroot Signed-off-by: Romain Naour <romain.naour@openwide.fr> --- v1: - Move openpowerlink to hardware handling menu - Add package sources url - Add some help in menuconfig - Fix typo - Move openpowerlink demos in a submenu - Fix patch name - Fix debug default value - Add build Release or Debug depending on BR2_ENABLE_DEBUG v0: initial commit - Add openpowerlink package. Signed-off-by: Romain Naour <romain.naour@openwide.fr> --- package/Config.in | 1 + package/openpowerlink/Config.in | 107 +++++++++++++++++++++ .../openpowerlink-0001-fix-demo-mn-qt.patch | 22 +++++ package/openpowerlink/openpowerlink.mk | 92 ++++++++++++++++++ 4 files changed, 222 insertions(+) create mode 100644 package/openpowerlink/Config.in create mode 100644 package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch create mode 100644 package/openpowerlink/openpowerlink.mk diff --git a/package/Config.in b/package/Config.in index e1dfd5d..911cba1 100644 --- a/package/Config.in +++ b/package/Config.in @@ -309,6 +309,7 @@ source "package/ofono/Config.in" source "package/on2-8170-modules/Config.in" source "package/open2300/Config.in" source "package/openocd/Config.in" +source "package/openpowerlink/Config.in" source "package/owl-linux/Config.in" source "package/parted/Config.in" source "package/pciutils/Config.in" diff --git a/package/openpowerlink/Config.in b/package/openpowerlink/Config.in new file mode 100644 index 0000000..1bf6559 --- /dev/null +++ b/package/openpowerlink/Config.in @@ -0,0 +1,107 @@ +comment "openpowerlink requires thread support in toolchain" + depends on !BR2_TOOLCHAIN_HAS_THREADS + +config BR2_PACKAGE_OPENPOWERLINK + bool "openpowerlink" + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_i386 || BR2_x86_64 + help + openPOWERLINK is an Open Source Industrial Ethernet + stack implementing the POWERLINK protocol for Managing Node + (MN, POWERLINK Master) and Controlled Node (CN, POWERLINK Slave). + + It is provided by SYSTEC electronic (http://www.systec-electronic.com), + B&R (http://www.br-automation.com) and + Kalycito (http://www.kalycito.com). + + https://sourceforge.net/projects/openpowerlink/ + +if BR2_PACKAGE_OPENPOWERLINK + +choice + prompt "stack implementation" + +config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP + bool "userspace stack" + select BR2_PACKAGE_LIBPCAP + help + The Linux userspace implementation of the openPOWERLINK stack provides all + functions for a software based POWERLINK solution running as Linux userspace + application. The stack uses the libpcap library for accessing the network + interface and is therefore totally independant of the used network card and + driver. + +config BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + bool "kernel stack" + depends on BR2_LINUX_KERNEL + help + The openPOWERLINK stack may be implemented as Linux kernel module. + This solution provides the best performance, but is limited to the available + openPOWERLINK network drivers. + You may select BR2_PACKAGE_PCIUTILS for lscpi, and BR2_PACKAGE_PROCPS for ps command. + These commands are used in EplLoad and EplUndload scripts. + +endchoice + +if BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + +choice + prompt "select Ethernet Powerlink Driver" + +config BR2_PACKAGE_OPENPOWERLINK_82573 + bool "Intel 82573" + +config BR2_PACKAGE_OPENPOWERLINK_8255x + bool "Intel 8255x" + +config BR2_PACKAGE_OPENPOWERLINK_RTL8139 + bool "Realtek RTL-8139" + +endchoice + +endif + +choice + prompt "Select MN/CN mode" + + config BR2_PACKAGE_OPENPOWERLINK_MN + bool "MN" + help + Enable Managing Node mode + + config BR2_PACKAGE_OPENPOWERLINK_CN + bool "CN" + help + Enable Controlled Node mode + +endchoice + +menu "openpowerlink demos" + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE + bool "console MN demo" + depends on BR2_PACKAGE_OPENPOWERLINK_MN + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT + bool "qt MN demo" + depends on BR2_PACKAGE_OPENPOWERLINK_MN + select BR2_PACKAGE_QT + select BR2_PACKAGE_QT_STL + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE + bool "console CN demo" + depends on !BR2_PACKAGE_OPENPOWERLINK_MN + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL + bool "kernel demo" + depends on BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + +endmenu + +config BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL + string "debug level for openpowerlink stack" + default "0xEC000000L" + help + Debug level to be used for openPOWERLINK debugging functions. + +endif diff --git a/package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch b/package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch new file mode 100644 index 0000000..55a3bb5 --- /dev/null +++ b/package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch @@ -0,0 +1,22 @@ +commit 8658075bd7c49a7481e8f6d0d7a13b0651e1dfd7 +Author: Romain Naour <romain.naour@openwide.fr> +Date: Wed Sep 18 23:33:04 2013 +0200 + + [FIX] demo_mn_qt: add EplDebug.c in demo_sources list + + demo_mn_qt use EplGetEmergErrCodeStr() + + Signed-off-by: Romain Naour <romain.naour@openwide.fr> + +diff --git a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt +index 9db2f7f..48ae9eb 100644 +--- a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt ++++ b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt +@@ -78,6 +78,7 @@ SET(DEMO_SOURCES src/EplApi.cpp + src/MainWindow.cpp + src/NodeState.cpp + ${POWERLINK_SOURCE_DIR}/ObjDicts/${OBJDICT}/EplApiProcessImageSetup.c ++ ${POWERLINK_SOURCE_DIR}/EplStack/EplDebug.c + ) + + # The TRACE macros need trace.c on the Windows platform diff --git a/package/openpowerlink/openpowerlink.mk b/package/openpowerlink/openpowerlink.mk new file mode 100644 index 0000000..37b9def --- /dev/null +++ b/package/openpowerlink/openpowerlink.mk @@ -0,0 +1,92 @@ +################################################################################ +# +# openPOWERLINK +# +################################################################################ + +OPENPOWERLINK_VERSION = V1.08.3 +OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip +OPENPOWERLINK_SITE = http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3 + +OPENPOWERLINK_LICENSE = BSD-2c, GPLv2 +OPENPOWERLINK_LICENSE_FILES = license.txt +OPENPOWERLINK_INSTALL_STAGING = YES + +ifeq ($(BR2_i386),y) +OPENPOWERLINK_ARCH = x86 +endif + +ifeq ($(BR2_x86_64),y) +OPENPOWERLINK_ARCH = x86_64 +endif + +OPENPOWERLINK_CONF_OPT = -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH) +OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/ + +ifeq ($(BR2_ENABLE_DEBUG),y) +OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Debug +else +OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Release +endif + +OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=$(call qstrip,$(BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL)) + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_LIBPCAP),y) +# use the user space stack (libpcap) +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=OFF +OPENPOWERLINK_DEPENDENCIES = libpcap +else +# use the kernel stack +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=ON +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_DIR=$(LINUX_DIR) +OPENPOWERLINK_CONF_OPT += -DCMAKE_SYSTEM_VERSION=$(LINUX_VERSION) +OPENPOWERLINK_DEPENDENCIES = linux +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_82573),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=82573 +else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_RTL8139),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8139 +else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_8255x),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8255x +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_MN),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=ON +OPENPOWERLINK_DEPENDENCIES += qt +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=OFF +endif + +define OPENPOWERLINK_EXTRACT_CMDS + $(RM) -rf $(OPENPOWERLINK_DIR) + unzip -q -d $(BUILD_DIR)/ $(DL_DIR)/$(OPENPOWERLINK_SOURCE) + test -d $(OPENPOWERLINK_DIR) || \ + mv $(BUILD_DIR)/$(subst .zip,,$(OPENPOWERLINK_SOURCE)) $(OPENPOWERLINK_DIR) +endef + +$(eval $(cmake-package)) -- 1.8.4 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH v1 1/1] Openpowerlink: new package 2013-09-21 10:20 ` [Buildroot] [PATCH v1 1/1] Openpowerlink: new package Romain Naour @ 2013-09-22 13:50 ` Thomas Petazzoni 2013-09-23 11:08 ` Romain Naour 2013-09-24 15:24 ` Thomas De Schampheleire 1 sibling, 1 reply; 4+ messages in thread From: Thomas Petazzoni @ 2013-09-22 13:50 UTC (permalink / raw) To: buildroot Dear Romain Naour, On Sat, 21 Sep 2013 12:20:00 +0200 (CEST), Romain Naour wrote: > --- /dev/null > +++ b/package/openpowerlink/openpowerlink.mk > @@ -0,0 +1,92 @@ > +################################################################################ > +# > +# openPOWERLINK It should be lower cased completely. > +# > +################################################################################ > + > +OPENPOWERLINK_VERSION = V1.08.3 > +OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip > +OPENPOWERLINK_SITE = http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3 > + > +OPENPOWERLINK_LICENSE = BSD-2c, GPLv2 > +OPENPOWERLINK_LICENSE_FILES = license.txt > +OPENPOWERLINK_INSTALL_STAGING = YES > + > +ifeq ($(BR2_i386),y) > +OPENPOWERLINK_ARCH = x86 > +endif > + > +ifeq ($(BR2_x86_64),y) > +OPENPOWERLINK_ARCH = x86_64 > +endif > + > +OPENPOWERLINK_CONF_OPT = -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH) > +OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/ We normally put such things with one statement: FOO_CONF_OPT = \ BLEH1 \ BLEH2 *But* in this particular case, there is no need to pass -DCMAKE_INSTALL_PREFIX, because it is already passed by the CMake package infrastructure. Thomas -- Thomas Petazzoni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH v1 1/1] Openpowerlink: new package 2013-09-22 13:50 ` Thomas Petazzoni @ 2013-09-23 11:08 ` Romain Naour 0 siblings, 0 replies; 4+ messages in thread From: Romain Naour @ 2013-09-23 11:08 UTC (permalink / raw) To: buildroot Hi Thomas, ----- Mail original ----- | De: "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com> | ?: "Romain Naour" <romain.naour@openwide.fr> | Cc: "buildroot" <buildroot@busybox.net> | Envoy?: Dimanche 22 Septembre 2013 15:50:36 | Objet: Re: [Buildroot] [PATCH v1 1/1] Openpowerlink: new package | | Dear Romain Naour, | | On Sat, 21 Sep 2013 12:20:00 +0200 (CEST), Romain Naour wrote: | | > --- /dev/null | > +++ b/package/openpowerlink/openpowerlink.mk | > @@ -0,0 +1,92 @@ | > +################################################################################ | > +# | > +# openPOWERLINK | | It should be lower cased completely. | | > +# | > +################################################################################ | > + | > +OPENPOWERLINK_VERSION = V1.08.3 | > +OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip | > +OPENPOWERLINK_SITE = | > http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3 | > + | > +OPENPOWERLINK_LICENSE = BSD-2c, GPLv2 | > +OPENPOWERLINK_LICENSE_FILES = license.txt | > +OPENPOWERLINK_INSTALL_STAGING = YES | > + | > +ifeq ($(BR2_i386),y) | > +OPENPOWERLINK_ARCH = x86 | > +endif | > + | > +ifeq ($(BR2_x86_64),y) | > +OPENPOWERLINK_ARCH = x86_64 | > +endif | > + | > +OPENPOWERLINK_CONF_OPT = | > -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH) | > +OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/ | | We normally put such things with one statement: | | FOO_CONF_OPT = \ | BLEH1 \ | BLEH2 | | *But* in this particular case, there is no need to pass | -DCMAKE_INSTALL_PREFIX, because it is already passed by the CMake | package infrastructure. Thanks for the advice. Best regards, Romain | | Thomas | -- | Thomas Petazzoni, Free Electrons | Embedded Linux, Kernel and Android engineering | http://free-electrons.com | ^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH v1 1/1] Openpowerlink: new package 2013-09-21 10:20 ` [Buildroot] [PATCH v1 1/1] Openpowerlink: new package Romain Naour 2013-09-22 13:50 ` Thomas Petazzoni @ 2013-09-24 15:24 ` Thomas De Schampheleire 1 sibling, 0 replies; 4+ messages in thread From: Thomas De Schampheleire @ 2013-09-24 15:24 UTC (permalink / raw) To: buildroot Romain Naour <romain.naour@openwide.fr> schreef: > >Signed-off-by: Romain Naour <romain.naour@openwide.fr> > >--- >v1: > - Move openpowerlink to hardware handling menu > - Add package sources url > - Add some help in menuconfig > - Fix typo > - Move openpowerlink demos in a submenu > - Fix patch name > - Fix debug default value > - Add build Release or Debug depending on BR2_ENABLE_DEBUG > >v0: initial commit > - Add openpowerlink package. > >Signed-off-by: Romain Naour <romain.naour@openwide.fr> >--- > package/Config.in | 1 + > package/openpowerlink/Config.in | 107 +++++++++++++++++++++ > .../openpowerlink-0001-fix-demo-mn-qt.patch | 22 +++++ > package/openpowerlink/openpowerlink.mk | 92 ++++++++++++++++++ > 4 files changed, 222 insertions(+) > create mode 100644 package/openpowerlink/Config.in > create mode 100644 package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch > create mode 100644 package/openpowerlink/openpowerlink.mk > >diff --git a/package/Config.in b/package/Config.in >index e1dfd5d..911cba1 100644 >--- a/package/Config.in >+++ b/package/Config.in >@@ -309,6 +309,7 @@ source "package/ofono/Config.in" > source "package/on2-8170-modules/Config.in" > source "package/open2300/Config.in" > source "package/openocd/Config.in" >+source "package/openpowerlink/Config.in" > source "package/owl-linux/Config.in" > source "package/parted/Config.in" > source "package/pciutils/Config.in" >diff --git a/package/openpowerlink/Config.in b/package/openpowerlink/Config.in >new file mode 100644 >index 0000000..1bf6559 >--- /dev/null >+++ b/package/openpowerlink/Config.in >@@ -0,0 +1,107 @@ >+comment "openpowerlink requires thread support in toolchain" >+ depends on !BR2_TOOLCHAIN_HAS_THREADS >+ >+config BR2_PACKAGE_OPENPOWERLINK >+ bool "openpowerlink" >+ depends on BR2_TOOLCHAIN_HAS_THREADS >+ depends on BR2_i386 || BR2_x86_64 >+ help >+ openPOWERLINK is an Open Source Industrial Ethernet >+ stack implementing the POWERLINK protocol for Managing Node >+ (MN, POWERLINK Master) and Controlled Node (CN, POWERLINK Slave). >+ >+ It is provided by SYSTEC electronic (http://www.systec-electronic.com), >+ B&R (http://www.br-automation.com) and >+ Kalycito (http://www.kalycito.com). >+ >+ https://sourceforge.net/projects/openpowerlink/ >+ >+if BR2_PACKAGE_OPENPOWERLINK >+ >+choice >+ prompt "stack implementation" >+ >+config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP >+ bool "userspace stack" >+ select BR2_PACKAGE_LIBPCAP >+ help >+ The Linux userspace implementation of the openPOWERLINK stack provides all >+ functions for a software based POWERLINK solution running as Linux userspace >+ application. The stack uses the libpcap library for accessing the network >+ interface and is therefore totally independant of the used network card and >+ driver. >+ >+config BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE >+ bool "kernel stack" >+ depends on BR2_LINUX_KERNEL >+ help >+ The openPOWERLINK stack may be implemented as Linux kernel module. >+ This solution provides the best performance, but is limited to the available >+ openPOWERLINK network drivers. >+ You may select BR2_PACKAGE_PCIUTILS for lscpi, and BR2_PACKAGE_PROCPS for ps command. >+ These commands are used in EplLoad and EplUndload scripts. >+ >+endchoice >+ >+if BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE >+ >+choice >+ prompt "select Ethernet Powerlink Driver" >+ >+config BR2_PACKAGE_OPENPOWERLINK_82573 >+ bool "Intel 82573" >+ >+config BR2_PACKAGE_OPENPOWERLINK_8255x >+ bool "Intel 8255x" >+ >+config BR2_PACKAGE_OPENPOWERLINK_RTL8139 >+ bool "Realtek RTL-8139" >+ >+endchoice >+ >+endif >+ >+choice >+ prompt "Select MN/CN mode" >+ >+ config BR2_PACKAGE_OPENPOWERLINK_MN >+ bool "MN" >+ help >+ Enable Managing Node mode >+ >+ config BR2_PACKAGE_OPENPOWERLINK_CN >+ bool "CN" >+ help >+ Enable Controlled Node mode >+ >+endchoice >+ >+menu "openpowerlink demos" >+ >+config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE >+ bool "console MN demo" >+ depends on BR2_PACKAGE_OPENPOWERLINK_MN >+ >+config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT >+ bool "qt MN demo" >+ depends on BR2_PACKAGE_OPENPOWERLINK_MN >+ select BR2_PACKAGE_QT >+ select BR2_PACKAGE_QT_STL >+ >+config BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE >+ bool "console CN demo" >+ depends on !BR2_PACKAGE_OPENPOWERLINK_MN >+ >+config BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL >+ bool "kernel demo" >+ depends on BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE >+ >+endmenu >+ >+config BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL >+ string "debug level for openpowerlink stack" >+ default "0xEC000000L" >+ help >+ Debug level to be used for openPOWERLINK debugging functions. >+ >+endif >diff --git a/package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch b/package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch >new file mode 100644 >index 0000000..55a3bb5 >--- /dev/null >+++ b/package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch >@@ -0,0 +1,22 @@ >+commit 8658075bd7c49a7481e8f6d0d7a13b0651e1dfd7 >+Author: Romain Naour <romain.naour@openwide.fr> >+Date: Wed Sep 18 23:33:04 2013 +0200 >+ >+ [FIX] demo_mn_qt: add EplDebug.c in demo_sources list >+ >+ demo_mn_qt use EplGetEmergErrCodeStr() >+ >+ Signed-off-by: Romain Naour <romain.naour@openwide.fr> >+ >+diff --git a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt >+index 9db2f7f..48ae9eb 100644 >+--- a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt >++++ b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt >+@@ -78,6 +78,7 @@ SET(DEMO_SOURCES src/EplApi.cpp >+ src/MainWindow.cpp >+ src/NodeState.cpp >+ ${POWERLINK_SOURCE_DIR}/ObjDicts/${OBJDICT}/EplApiProcessImageSetup.c >++ ${POWERLINK_SOURCE_DIR}/EplStack/EplDebug.c >+ ) >+ >+ # The TRACE macros need trace.c on the Windows platform >diff --git a/package/openpowerlink/openpowerlink.mk b/package/openpowerlink/openpowerlink.mk >new file mode 100644 >index 0000000..37b9def >--- /dev/null >+++ b/package/openpowerlink/openpowerlink.mk >@@ -0,0 +1,92 @@ >+################################################################################ >+# >+# openPOWERLINK >+# >+################################################################################ >+ >+OPENPOWERLINK_VERSION = V1.08.3 >+OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip >+OPENPOWERLINK_SITE = http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3 >+ >+OPENPOWERLINK_LICENSE = BSD-2c, GPLv2 >+OPENPOWERLINK_LICENSE_FILES = license.txt >+OPENPOWERLINK_INSTALL_STAGING = YES >+ >+ifeq ($(BR2_i386),y) >+OPENPOWERLINK_ARCH = x86 >+endif >+ >+ifeq ($(BR2_x86_64),y) >+OPENPOWERLINK_ARCH = x86_64 >+endif >+ >+OPENPOWERLINK_CONF_OPT = -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH) >+OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/ >+ >+ifeq ($(BR2_ENABLE_DEBUG),y) >+OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Debug >+else >+OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Release >+endif >+ >+OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=$(call qstrip,$(BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL)) >+ >+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_LIBPCAP),y) >+# use the user space stack (libpcap) >+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=OFF >+OPENPOWERLINK_DEPENDENCIES = libpcap >+else >+# use the kernel stack >+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=ON >+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_DIR=$(LINUX_DIR) >+OPENPOWERLINK_CONF_OPT += -DCMAKE_SYSTEM_VERSION=$(LINUX_VERSION) >+OPENPOWERLINK_DEPENDENCIES = linux >+endif >+ >+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_82573),y) >+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=82573 >+else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_RTL8139),y) >+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8139 >+else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_8255x),y) >+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8255x >+endif >+ >+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_MN),y) >+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=ON >+else >+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=OFF >+endif >+ >+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE),y) >+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=ON >+else >+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=OFF >+endif >+ >+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT),y) >+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=ON >+OPENPOWERLINK_DEPENDENCIES += qt >+else >+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=OFF >+endif >+ >+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE),y) >+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=ON >+else >+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=OFF >+endif >+ >+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL),y) >+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=ON >+else >+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=OFF >+endif >+ >+define OPENPOWERLINK_EXTRACT_CMDS >+ $(RM) -rf $(OPENPOWERLINK_DIR) >+ unzip -q -d $(BUILD_DIR)/ $(DL_DIR)/$(OPENPOWERLINK_SOURCE) >+ test -d $(OPENPOWERLINK_DIR) || \ >+ mv $(BUILD_DIR)/$(subst .zip,,$(OPENPOWERLINK_SOURCE)) $(OPENPOWERLINK_DIR) >+endef >+ >+$(eval $(cmake-package)) Victory! With my patched k9, wrapping should be disabled now. This is still hacked in, as I couldn't yet make a cleaner way work (crash when opening preferences). Best regards, Thomas ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-09-24 15:24 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1103454476.7313953.1379758391823.JavaMail.root@openwide.fr>
2013-09-21 10:20 ` [Buildroot] [PATCH v1 1/1] Openpowerlink: new package Romain Naour
2013-09-22 13:50 ` Thomas Petazzoni
2013-09-23 11:08 ` Romain Naour
2013-09-24 15:24 ` Thomas De Schampheleire
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox