[Buildroot] [PATCH v1 1/1] Openpowerlink: new package

[Buildroot] [PATCH v1 1/1] Openpowerlink: new package

[Romain Naour]

Signed-off-by: Romain Naour <romain.naour@openwide.fr>

---
v1:
  - Move openpowerlink to hardware handling menu
  - Add package sources url
  - Add some help in menuconfig
  - Fix typo
  - Move openpowerlink demos in a submenu
  - Fix patch name
  - Fix debug default value
  - Add build Release or Debug depending on BR2_ENABLE_DEBUG

v0: initial commit
  - Add openpowerlink package.

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
---
 package/Config.in                                  |   1 +
 package/openpowerlink/Config.in                    | 107 +++++++++++++++++++++
 .../openpowerlink-0001-fix-demo-mn-qt.patch        |  22 +++++
 package/openpowerlink/openpowerlink.mk             |  92 ++++++++++++++++++
 4 files changed, 222 insertions(+)
 create mode 100644 package/openpowerlink/Config.in
 create mode 100644 package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch
 create mode 100644 package/openpowerlink/openpowerlink.mk

diff --git a/package/Config.in b/package/Config.in
index e1dfd5d..911cba1 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -309,6 +309,7 @@ source "package/ofono/Config.in"
 source "package/on2-8170-modules/Config.in"
 source "package/open2300/Config.in"
 source "package/openocd/Config.in"
+source "package/openpowerlink/Config.in"
 source "package/owl-linux/Config.in"
 source "package/parted/Config.in"
 source "package/pciutils/Config.in"
diff --git a/package/openpowerlink/Config.in b/package/openpowerlink/Config.in
new file mode 100644
index 0000000..1bf6559
--- /dev/null
+++ b/package/openpowerlink/Config.in
@@ -0,0 +1,107 @@
+comment "openpowerlink requires thread support in toolchain"
+	depends on !BR2_TOOLCHAIN_HAS_THREADS
+
+config BR2_PACKAGE_OPENPOWERLINK
+	bool "openpowerlink"
+	depends on BR2_TOOLCHAIN_HAS_THREADS
+	depends on BR2_i386 || BR2_x86_64
+	help
+	  openPOWERLINK is an Open Source Industrial Ethernet 
+	  stack implementing the POWERLINK protocol for Managing Node 
+	  (MN, POWERLINK Master) and Controlled Node (CN, POWERLINK Slave).
+
+	  It is provided by SYSTEC electronic (http://www.systec-electronic.com), 
+	  B&R (http://www.br-automation.com) and 
+	  Kalycito (http://www.kalycito.com).
+
+	  https://sourceforge.net/projects/openpowerlink/
+
+if BR2_PACKAGE_OPENPOWERLINK
+
+choice
+	prompt "stack implementation"
+
+config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP
+	bool "userspace stack"
+	select BR2_PACKAGE_LIBPCAP
+	help
+	  The Linux userspace implementation of the openPOWERLINK stack provides all
+	  functions for a software based POWERLINK solution running as Linux userspace
+	  application. The stack uses the libpcap library for accessing the network
+	  interface and is therefore totally independant of the used network card and
+	  driver.
+
+config BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE
+	bool "kernel stack"
+	depends on BR2_LINUX_KERNEL
+	help
+	  The openPOWERLINK stack may be implemented as Linux kernel module. 
+	  This solution provides the best performance, but is limited to the available 
+	  openPOWERLINK network drivers.
+	  You may select BR2_PACKAGE_PCIUTILS for lscpi, and BR2_PACKAGE_PROCPS for ps command.
+	  These commands are used in EplLoad and EplUndload scripts.
+
+endchoice
+
+if BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE
+
+choice
+	prompt "select Ethernet Powerlink Driver"
+
+config BR2_PACKAGE_OPENPOWERLINK_82573
+	bool "Intel 82573"
+
+config BR2_PACKAGE_OPENPOWERLINK_8255x
+	bool "Intel 8255x"
+
+config BR2_PACKAGE_OPENPOWERLINK_RTL8139
+	bool "Realtek RTL-8139"
+
+endchoice
+
+endif
+
+choice
+	prompt "Select MN/CN mode"
+
+	config BR2_PACKAGE_OPENPOWERLINK_MN
+	bool "MN"
+	help
+	  Enable Managing Node mode
+
+	config BR2_PACKAGE_OPENPOWERLINK_CN
+	bool "CN"
+	help
+	  Enable Controlled Node mode
+
+endchoice
+
+menu "openpowerlink demos"
+
+config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE
+	bool "console MN demo"
+	depends on BR2_PACKAGE_OPENPOWERLINK_MN
+
+config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT
+	bool "qt MN demo"
+	depends on BR2_PACKAGE_OPENPOWERLINK_MN
+	select BR2_PACKAGE_QT
+	select BR2_PACKAGE_QT_STL
+
+config BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE
+	bool "console CN demo"
+	depends on !BR2_PACKAGE_OPENPOWERLINK_MN
+
+config BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL
+	bool "kernel demo"
+	depends on BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE
+
+endmenu
+
+config BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL
+	string "debug level for openpowerlink stack"
+	default "0xEC000000L"
+	help
+	  Debug level to be used for openPOWERLINK debugging functions.
+
+endif
diff --git a/package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch b/package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch
new file mode 100644
index 0000000..55a3bb5
--- /dev/null
+++ b/package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch
@@ -0,0 +1,22 @@
+commit 8658075bd7c49a7481e8f6d0d7a13b0651e1dfd7
+Author: Romain Naour <romain.naour@openwide.fr>
+Date:   Wed Sep 18 23:33:04 2013 +0200
+
+    [FIX] demo_mn_qt: add EplDebug.c in demo_sources list
+    
+    demo_mn_qt use EplGetEmergErrCodeStr()
+    
+    Signed-off-by: Romain Naour <romain.naour@openwide.fr>
+
+diff --git a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
+index 9db2f7f..48ae9eb 100644
+--- a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
++++ b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
+@@ -78,6 +78,7 @@ SET(DEMO_SOURCES src/EplApi.cpp
+                  src/MainWindow.cpp
+                  src/NodeState.cpp
+                  ${POWERLINK_SOURCE_DIR}/ObjDicts/${OBJDICT}/EplApiProcessImageSetup.c
++                 ${POWERLINK_SOURCE_DIR}/EplStack/EplDebug.c
+     )
+ 
+ # The TRACE macros need trace.c on the Windows platform
diff --git a/package/openpowerlink/openpowerlink.mk b/package/openpowerlink/openpowerlink.mk
new file mode 100644
index 0000000..37b9def
--- /dev/null
+++ b/package/openpowerlink/openpowerlink.mk
@@ -0,0 +1,92 @@
+################################################################################
+#
+# openPOWERLINK
+#
+################################################################################
+
+OPENPOWERLINK_VERSION = V1.08.3
+OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip
+OPENPOWERLINK_SITE = http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3
+
+OPENPOWERLINK_LICENSE = BSD-2c, GPLv2
+OPENPOWERLINK_LICENSE_FILES = license.txt
+OPENPOWERLINK_INSTALL_STAGING = YES
+
+ifeq ($(BR2_i386),y)
+OPENPOWERLINK_ARCH = x86
+endif
+
+ifeq ($(BR2_x86_64),y)
+OPENPOWERLINK_ARCH = x86_64
+endif
+
+OPENPOWERLINK_CONF_OPT = -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH)
+OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/
+
+ifeq ($(BR2_ENABLE_DEBUG),y)
+OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Debug
+else
+OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Release
+endif
+
+OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=$(call qstrip,$(BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL))
+
+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_LIBPCAP),y)
+#  use the user space stack (libpcap)
+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=OFF
+OPENPOWERLINK_DEPENDENCIES = libpcap
+else
+# use the kernel stack
+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=ON
+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_DIR=$(LINUX_DIR)
+OPENPOWERLINK_CONF_OPT += -DCMAKE_SYSTEM_VERSION=$(LINUX_VERSION)
+OPENPOWERLINK_DEPENDENCIES = linux
+endif
+
+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_82573),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=82573
+else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_RTL8139),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8139
+else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_8255x),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8255x
+endif
+
+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_MN),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=ON
+else
+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=OFF
+endif
+
+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=ON
+else
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=OFF
+endif
+
+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=ON
+OPENPOWERLINK_DEPENDENCIES += qt
+else
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=OFF
+endif
+
+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=ON
+else
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=OFF
+endif
+
+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=ON
+else
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=OFF
+endif
+
+define OPENPOWERLINK_EXTRACT_CMDS
+	$(RM) -rf $(OPENPOWERLINK_DIR)
+	unzip -q -d $(BUILD_DIR)/ $(DL_DIR)/$(OPENPOWERLINK_SOURCE)
+	test -d $(OPENPOWERLINK_DIR) || \
+		mv $(BUILD_DIR)/$(subst .zip,,$(OPENPOWERLINK_SOURCE)) $(OPENPOWERLINK_DIR)
+endef
+
+$(eval $(cmake-package))
-- 
1.8.4

[Buildroot] [PATCH v1 1/1] Openpowerlink: new package

[Thomas Petazzoni]

Dear Romain Naour,

On Sat, 21 Sep 2013 12:20:00 +0200 (CEST), Romain Naour wrote:

> --- /dev/null
> +++ b/package/openpowerlink/openpowerlink.mk
> @@ -0,0 +1,92 @@
> +################################################################################
> +#
> +# openPOWERLINK

It should be lower cased completely.

> +#
> +################################################################################
> +
> +OPENPOWERLINK_VERSION = V1.08.3
> +OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip
> +OPENPOWERLINK_SITE = http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3
> +
> +OPENPOWERLINK_LICENSE = BSD-2c, GPLv2
> +OPENPOWERLINK_LICENSE_FILES = license.txt
> +OPENPOWERLINK_INSTALL_STAGING = YES
> +
> +ifeq ($(BR2_i386),y)
> +OPENPOWERLINK_ARCH = x86
> +endif
> +
> +ifeq ($(BR2_x86_64),y)
> +OPENPOWERLINK_ARCH = x86_64
> +endif
> +
> +OPENPOWERLINK_CONF_OPT = -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH)
> +OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/

We normally put such things with one statement:

FOO_CONF_OPT = \
	BLEH1 \
	BLEH2

*But* in this particular case, there is no need to pass
-DCMAKE_INSTALL_PREFIX, because it is already passed by the CMake
package infrastructure.

Thomas
-- 
Thomas Petazzoni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH v1 1/1] Openpowerlink: new package

[Romain Naour]

Hi Thomas,

----- Mail original -----
| De: "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com>
| ?: "Romain Naour" <romain.naour@openwide.fr>
| Cc: "buildroot" <buildroot@busybox.net>
| Envoy?: Dimanche 22 Septembre 2013 15:50:36
| Objet: Re: [Buildroot] [PATCH v1 1/1] Openpowerlink: new package
| 
| Dear Romain Naour,
| 
| On Sat, 21 Sep 2013 12:20:00 +0200 (CEST), Romain Naour wrote:
| 
| > --- /dev/null
| > +++ b/package/openpowerlink/openpowerlink.mk
| > @@ -0,0 +1,92 @@
| > +################################################################################
| > +#
| > +# openPOWERLINK
| 
| It should be lower cased completely.
| 
| > +#
| > +################################################################################
| > +
| > +OPENPOWERLINK_VERSION = V1.08.3
| > +OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip
| > +OPENPOWERLINK_SITE =
| > http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3
| > +
| > +OPENPOWERLINK_LICENSE = BSD-2c, GPLv2
| > +OPENPOWERLINK_LICENSE_FILES = license.txt
| > +OPENPOWERLINK_INSTALL_STAGING = YES
| > +
| > +ifeq ($(BR2_i386),y)
| > +OPENPOWERLINK_ARCH = x86
| > +endif
| > +
| > +ifeq ($(BR2_x86_64),y)
| > +OPENPOWERLINK_ARCH = x86_64
| > +endif
| > +
| > +OPENPOWERLINK_CONF_OPT =
| > -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH)
| > +OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/
| 
| We normally put such things with one statement:
| 
| FOO_CONF_OPT = \
| 	BLEH1 \
| 	BLEH2
| 
| *But* in this particular case, there is no need to pass
| -DCMAKE_INSTALL_PREFIX, because it is already passed by the CMake
| package infrastructure.

Thanks for the advice.

Best regards,
Romain

| 
| Thomas
| --
| Thomas Petazzoni, Free Electrons
| Embedded Linux, Kernel and Android engineering
| http://free-electrons.com
| 

[Buildroot] [PATCH v1 1/1] Openpowerlink: new package

[Thomas De Schampheleire]

Romain Naour <romain.naour@openwide.fr> schreef:
>
>Signed-off-by: Romain Naour <romain.naour@openwide.fr>
>
>---
>v1:
>  - Move openpowerlink to hardware handling menu
>  - Add package sources url
>  - Add some help in menuconfig
>  - Fix typo
>  - Move openpowerlink demos in a submenu
>  - Fix patch name
>  - Fix debug default value
>  - Add build Release or Debug depending on BR2_ENABLE_DEBUG
>
>v0: initial commit
>  - Add openpowerlink package.
>
>Signed-off-by: Romain Naour <romain.naour@openwide.fr>
>---
> package/Config.in                                  |   1 +
> package/openpowerlink/Config.in                    | 107 +++++++++++++++++++++
> .../openpowerlink-0001-fix-demo-mn-qt.patch        |  22 +++++
> package/openpowerlink/openpowerlink.mk             |  92 ++++++++++++++++++
> 4 files changed, 222 insertions(+)
> create mode 100644 package/openpowerlink/Config.in
> create mode 100644 package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch
> create mode 100644 package/openpowerlink/openpowerlink.mk
>
>diff --git a/package/Config.in b/package/Config.in
>index e1dfd5d..911cba1 100644
>--- a/package/Config.in
>+++ b/package/Config.in
>@@ -309,6 +309,7 @@ source "package/ofono/Config.in"
> source "package/on2-8170-modules/Config.in"
> source "package/open2300/Config.in"
> source "package/openocd/Config.in"
>+source "package/openpowerlink/Config.in"
> source "package/owl-linux/Config.in"
> source "package/parted/Config.in"
> source "package/pciutils/Config.in"
>diff --git a/package/openpowerlink/Config.in b/package/openpowerlink/Config.in
>new file mode 100644
>index 0000000..1bf6559
>--- /dev/null
>+++ b/package/openpowerlink/Config.in
>@@ -0,0 +1,107 @@
>+comment "openpowerlink requires thread support in toolchain"
>+	depends on !BR2_TOOLCHAIN_HAS_THREADS
>+
>+config BR2_PACKAGE_OPENPOWERLINK
>+	bool "openpowerlink"
>+	depends on BR2_TOOLCHAIN_HAS_THREADS
>+	depends on BR2_i386 || BR2_x86_64
>+	help
>+	  openPOWERLINK is an Open Source Industrial Ethernet 
>+	  stack implementing the POWERLINK protocol for Managing Node 
>+	  (MN, POWERLINK Master) and Controlled Node (CN, POWERLINK Slave).
>+
>+	  It is provided by SYSTEC electronic (http://www.systec-electronic.com), 
>+	  B&R (http://www.br-automation.com) and 
>+	  Kalycito (http://www.kalycito.com).
>+
>+	  https://sourceforge.net/projects/openpowerlink/
>+
>+if BR2_PACKAGE_OPENPOWERLINK
>+
>+choice
>+	prompt "stack implementation"
>+
>+config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP
>+	bool "userspace stack"
>+	select BR2_PACKAGE_LIBPCAP
>+	help
>+	  The Linux userspace implementation of the openPOWERLINK stack provides all
>+	  functions for a software based POWERLINK solution running as Linux userspace
>+	  application. The stack uses the libpcap library for accessing the network
>+	  interface and is therefore totally independant of the used network card and
>+	  driver.
>+
>+config BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE
>+	bool "kernel stack"
>+	depends on BR2_LINUX_KERNEL
>+	help
>+	  The openPOWERLINK stack may be implemented as Linux kernel module. 
>+	  This solution provides the best performance, but is limited to the available 
>+	  openPOWERLINK network drivers.
>+	  You may select BR2_PACKAGE_PCIUTILS for lscpi, and BR2_PACKAGE_PROCPS for ps command.
>+	  These commands are used in EplLoad and EplUndload scripts.
>+
>+endchoice
>+
>+if BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE
>+
>+choice
>+	prompt "select Ethernet Powerlink Driver"
>+
>+config BR2_PACKAGE_OPENPOWERLINK_82573
>+	bool "Intel 82573"
>+
>+config BR2_PACKAGE_OPENPOWERLINK_8255x
>+	bool "Intel 8255x"
>+
>+config BR2_PACKAGE_OPENPOWERLINK_RTL8139
>+	bool "Realtek RTL-8139"
>+
>+endchoice
>+
>+endif
>+
>+choice
>+	prompt "Select MN/CN mode"
>+
>+	config BR2_PACKAGE_OPENPOWERLINK_MN
>+	bool "MN"
>+	help
>+	  Enable Managing Node mode
>+
>+	config BR2_PACKAGE_OPENPOWERLINK_CN
>+	bool "CN"
>+	help
>+	  Enable Controlled Node mode
>+
>+endchoice
>+
>+menu "openpowerlink demos"
>+
>+config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE
>+	bool "console MN demo"
>+	depends on BR2_PACKAGE_OPENPOWERLINK_MN
>+
>+config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT
>+	bool "qt MN demo"
>+	depends on BR2_PACKAGE_OPENPOWERLINK_MN
>+	select BR2_PACKAGE_QT
>+	select BR2_PACKAGE_QT_STL
>+
>+config BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE
>+	bool "console CN demo"
>+	depends on !BR2_PACKAGE_OPENPOWERLINK_MN
>+
>+config BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL
>+	bool "kernel demo"
>+	depends on BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE
>+
>+endmenu
>+
>+config BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL
>+	string "debug level for openpowerlink stack"
>+	default "0xEC000000L"
>+	help
>+	  Debug level to be used for openPOWERLINK debugging functions.
>+
>+endif
>diff --git a/package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch b/package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch
>new file mode 100644
>index 0000000..55a3bb5
>--- /dev/null
>+++ b/package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch
>@@ -0,0 +1,22 @@
>+commit 8658075bd7c49a7481e8f6d0d7a13b0651e1dfd7
>+Author: Romain Naour <romain.naour@openwide.fr>
>+Date:   Wed Sep 18 23:33:04 2013 +0200
>+
>+    [FIX] demo_mn_qt: add EplDebug.c in demo_sources list
>+    
>+    demo_mn_qt use EplGetEmergErrCodeStr()
>+    
>+    Signed-off-by: Romain Naour <romain.naour@openwide.fr>
>+
>+diff --git a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
>+index 9db2f7f..48ae9eb 100644
>+--- a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
>++++ b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
>+@@ -78,6 +78,7 @@ SET(DEMO_SOURCES src/EplApi.cpp
>+                  src/MainWindow.cpp
>+                  src/NodeState.cpp
>+                  ${POWERLINK_SOURCE_DIR}/ObjDicts/${OBJDICT}/EplApiProcessImageSetup.c
>++                 ${POWERLINK_SOURCE_DIR}/EplStack/EplDebug.c
>+     )
>+ 
>+ # The TRACE macros need trace.c on the Windows platform
>diff --git a/package/openpowerlink/openpowerlink.mk b/package/openpowerlink/openpowerlink.mk
>new file mode 100644
>index 0000000..37b9def
>--- /dev/null
>+++ b/package/openpowerlink/openpowerlink.mk
>@@ -0,0 +1,92 @@
>+################################################################################
>+#
>+# openPOWERLINK
>+#
>+################################################################################
>+
>+OPENPOWERLINK_VERSION = V1.08.3
>+OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip
>+OPENPOWERLINK_SITE = http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3
>+
>+OPENPOWERLINK_LICENSE = BSD-2c, GPLv2
>+OPENPOWERLINK_LICENSE_FILES = license.txt
>+OPENPOWERLINK_INSTALL_STAGING = YES
>+
>+ifeq ($(BR2_i386),y)
>+OPENPOWERLINK_ARCH = x86
>+endif
>+
>+ifeq ($(BR2_x86_64),y)
>+OPENPOWERLINK_ARCH = x86_64
>+endif
>+
>+OPENPOWERLINK_CONF_OPT = -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH)
>+OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/
>+
>+ifeq ($(BR2_ENABLE_DEBUG),y)
>+OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Debug
>+else
>+OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Release
>+endif
>+
>+OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=$(call qstrip,$(BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL))
>+
>+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_LIBPCAP),y)
>+#  use the user space stack (libpcap)
>+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=OFF
>+OPENPOWERLINK_DEPENDENCIES = libpcap
>+else
>+# use the kernel stack
>+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=ON
>+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_DIR=$(LINUX_DIR)
>+OPENPOWERLINK_CONF_OPT += -DCMAKE_SYSTEM_VERSION=$(LINUX_VERSION)
>+OPENPOWERLINK_DEPENDENCIES = linux
>+endif
>+
>+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_82573),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=82573
>+else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_RTL8139),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8139
>+else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_8255x),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8255x
>+endif
>+
>+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_MN),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=ON
>+else
>+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=OFF
>+endif
>+
>+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=ON
>+else
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=OFF
>+endif
>+
>+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=ON
>+OPENPOWERLINK_DEPENDENCIES += qt
>+else
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=OFF
>+endif
>+
>+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=ON
>+else
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=OFF
>+endif
>+
>+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL),y)
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=ON
>+else
>+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=OFF
>+endif
>+
>+define OPENPOWERLINK_EXTRACT_CMDS
>+	$(RM) -rf $(OPENPOWERLINK_DIR)
>+	unzip -q -d $(BUILD_DIR)/ $(DL_DIR)/$(OPENPOWERLINK_SOURCE)
>+	test -d $(OPENPOWERLINK_DIR) || \
>+		mv $(BUILD_DIR)/$(subst .zip,,$(OPENPOWERLINK_SOURCE)) $(OPENPOWERLINK_DIR)
>+endef
>+
>+$(eval $(cmake-package))


Victory! With my patched k9, wrapping should be disabled now.
This is still hacked in, as I couldn't yet make a cleaner way work (crash when opening preferences).

Best regards,
Thomas