Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [Buildroot] Booting problem for Beaglebone
@ 2013-10-09  9:17 AUBERT alain
  2013-10-09  9:37 ` Stephan Hoffmann
  2013-10-09 11:55 ` Thomas Petazzoni
  0 siblings, 2 replies; 10+ messages in thread
From: AUBERT alain @ 2013-10-09  9:17 UTC (permalink / raw)
  To: buildroot

Hello,

We use Beaglebone board and the lastest version of buildroot 2013.08.1.

We launch/make toolchain/ and/make/ without change options in 
menuconfig, linux-menuconfig, ...
We program the SD card .
When the beaglebone board powers up,  the default configuration of Uboot 
takes the kernel at /boot/uImage but the default filesystem generated by 
buildroot  doesn't include the /boot directory.
So, we change in menuconfig,  the option "Install kernel image to /boot 
in target"

Then, the kernel is well loaded but the kernel tries to mount the root 
filesystem, it doesn't find
/dev/mmcblk0p2. The message is:
"Waiting for root device /dev/mmcblk0p2 ..."

It seems that the only block peripherals detected were ram and loop but 
not mmcblk

Can you help us ?
Thank you

Alain AUBERT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20131009/03224d0c/attachment.html>

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2013-12-23 21:47 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-09  9:17 [Buildroot] Booting problem for Beaglebone AUBERT alain
2013-10-09  9:37 ` Stephan Hoffmann
2013-10-09 11:55 ` Thomas Petazzoni
2013-10-09 15:15   ` AUBERT alain
2013-10-09 15:36     ` Thomas Petazzoni
2013-10-10  7:41       ` AUBERT alain
2013-12-23 15:08         ` Pierre Ficheux
2013-12-23 16:45           ` Thomas Petazzoni
2013-12-23 16:51             ` Pierre Ficheux
2013-12-23 21:47               ` Thomas Petazzoni

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox