* [Buildroot] Booting problem for Beaglebone
@ 2013-10-09 9:17 AUBERT alain
2013-10-09 9:37 ` Stephan Hoffmann
2013-10-09 11:55 ` Thomas Petazzoni
0 siblings, 2 replies; 10+ messages in thread
From: AUBERT alain @ 2013-10-09 9:17 UTC (permalink / raw)
To: buildroot
Hello,
We use Beaglebone board and the lastest version of buildroot 2013.08.1.
We launch/make toolchain/ and/make/ without change options in
menuconfig, linux-menuconfig, ...
We program the SD card .
When the beaglebone board powers up, the default configuration of Uboot
takes the kernel at /boot/uImage but the default filesystem generated by
buildroot doesn't include the /boot directory.
So, we change in menuconfig, the option "Install kernel image to /boot
in target"
Then, the kernel is well loaded but the kernel tries to mount the root
filesystem, it doesn't find
/dev/mmcblk0p2. The message is:
"Waiting for root device /dev/mmcblk0p2 ..."
It seems that the only block peripherals detected were ram and loop but
not mmcblk
Can you help us ?
Thank you
Alain AUBERT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20131009/03224d0c/attachment.html>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] Booting problem for Beaglebone
2013-10-09 9:17 [Buildroot] Booting problem for Beaglebone AUBERT alain
@ 2013-10-09 9:37 ` Stephan Hoffmann
2013-10-09 11:55 ` Thomas Petazzoni
1 sibling, 0 replies; 10+ messages in thread
From: Stephan Hoffmann @ 2013-10-09 9:37 UTC (permalink / raw)
To: buildroot
Am 09.10.2013 11:17, schrieb AUBERT alain:
> Hello,
>
> We use Beaglebone board and the lastest version of buildroot 2013.08.1.
>
> We launch/make toolchain/ and/make/ without change options in
> menuconfig, linux-menuconfig, ...
> We program the SD card .
> When the beaglebone board powers up, the default configuration of
> Uboot takes the kernel at /boot/uImage but the default filesystem
> generated by buildroot doesn't include the /boot directory.
> So, we change in menuconfig, the option "Install kernel image to
> /boot in target"
>
> Then, the kernel is well loaded but the kernel tries to mount the root
> filesystem, it doesn't find
> /dev/mmcblk0p2. The message is:
> "Waiting for root device /dev/mmcblk0p2 ..."
>
> It seems that the only block peripherals detected were ram and loop
> but not mmcblk
Hello Alain,
I had the same problem:
http://buildroot-busybox.2317881.n4.nabble.com/BeagleBone-defconfig-broken-td49751.html
Unfortunatelly, I had to focus on other things before coming to a
solution so that my beaglebone still sits in its box without buildroot.
Kind regards
Stephan
>
> Can you help us ?
> Thank you
>
> Alain AUBERT
>
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
reLinux - Stephan Hoffmann
Am Schmidtgrund 124 50765 K?ln
Tel. +49.221.95595-19 Fax: -64
www.reLinux.de sho at reLinux.de
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] Booting problem for Beaglebone
2013-10-09 9:17 [Buildroot] Booting problem for Beaglebone AUBERT alain
2013-10-09 9:37 ` Stephan Hoffmann
@ 2013-10-09 11:55 ` Thomas Petazzoni
2013-10-09 15:15 ` AUBERT alain
1 sibling, 1 reply; 10+ messages in thread
From: Thomas Petazzoni @ 2013-10-09 11:55 UTC (permalink / raw)
To: buildroot
Dear AUBERT alain,
On Wed, 09 Oct 2013 11:17:22 +0200, AUBERT alain wrote:
> We use Beaglebone board and the lastest version of buildroot 2013.08.1.
>
> We launch/make toolchain/ and/make/ without change options in
> menuconfig, linux-menuconfig, ...
Well, if you don't use a beaglebone configuration, how can you expect
things to work? If you have a classic BeagleBone (i.e the white
BeagleBone, not the newer black one), you should do:
make clean
make beaglebone_defconfig
make
Also not that running "make toolchain" prior to running "make" is not
needed.
> We program the SD card .
> When the beaglebone board powers up, the default configuration of Uboot
> takes the kernel at /boot/uImage but the default filesystem generated by
> buildroot doesn't include the /boot directory.
> So, we change in menuconfig, the option "Install kernel image to /boot
> in target"
>
> Then, the kernel is well loaded but the kernel tries to mount the root
> filesystem, it doesn't find
> /dev/mmcblk0p2. The message is:
> "Waiting for root device /dev/mmcblk0p2 ..."
>
> It seems that the only block peripherals detected were ram and loop but
> not mmcblk
The kernel boot arguments (defined at the bootloader level) tell the
kernel that the root filesystem is in the second partition of the SD
card. Which apparently isn't the case since this device never shows up.
You should make your SD card has two partitions, the first one with the
bootloader, and the second one with the root filesystem.
Also, can you post the complete boot log, so that we can see in more
details what's going on?
Best regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] Booting problem for Beaglebone
2013-10-09 11:55 ` Thomas Petazzoni
@ 2013-10-09 15:15 ` AUBERT alain
2013-10-09 15:36 ` Thomas Petazzoni
0 siblings, 1 reply; 10+ messages in thread
From: AUBERT alain @ 2013-10-09 15:15 UTC (permalink / raw)
To: buildroot
Dear Thomas ,
We have already done all steps of the building as you indicated in your mail
The 2 partitions are visible in Uboot with correct pararmeters.
We have done fatls mmc 0:1 and ext2ls mmc 0:2 to see the contents
Moreover, we have done the same operation with buildroot 2012.05 and the
beaglebone board works fine
It seems that the problem comes from the use of Flattened devices tree
in the new version of buildroot
You can find the bootlog in the attached file
Best regards
Alain
Le 09/10/2013 13:55, Thomas Petazzoni a ?crit :
> Dear AUBERT alain,
>
> On Wed, 09 Oct 2013 11:17:22 +0200, AUBERT alain wrote:
>
>> We use Beaglebone board and the lastest version of buildroot 2013.08.1.
>>
>> We launch/make toolchain/ and/make/ without change options in
>> menuconfig, linux-menuconfig, ...
> Well, if you don't use a beaglebone configuration, how can you expect
> things to work? If you have a classic BeagleBone (i.e the white
> BeagleBone, not the newer black one), you should do:
>
> make clean
> make beaglebone_defconfig
> make
>
> Also not that running "make toolchain" prior to running "make" is not
> needed.
>
>> We program the SD card .
>> When the beaglebone board powers up, the default configuration of Uboot
>> takes the kernel at /boot/uImage but the default filesystem generated by
>> buildroot doesn't include the /boot directory.
>> So, we change in menuconfig, the option "Install kernel image to /boot
>> in target"
>>
>> Then, the kernel is well loaded but the kernel tries to mount the root
>> filesystem, it doesn't find
>> /dev/mmcblk0p2. The message is:
>> "Waiting for root device /dev/mmcblk0p2 ..."
>>
>> It seems that the only block peripherals detected were ram and loop but
>> not mmcblk
> The kernel boot arguments (defined at the bootloader level) tell the
> kernel that the root filesystem is in the second partition of the SD
> card. Which apparently isn't the case since this device never shows up.
> You should make your SD card has two partitions, the first one with the
> bootloader, and the second one with the root filesystem.
>
> Also, can you post the complete boot log, so that we can see in more
> details what's going on?
>
> Best regards,
>
> Thomas
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bootlog
Type: application/octet-stream
Size: 10226 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20131009/ba27e6ac/attachment-0001.obj>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] Booting problem for Beaglebone
2013-10-09 15:15 ` AUBERT alain
@ 2013-10-09 15:36 ` Thomas Petazzoni
2013-10-10 7:41 ` AUBERT alain
0 siblings, 1 reply; 10+ messages in thread
From: Thomas Petazzoni @ 2013-10-09 15:36 UTC (permalink / raw)
To: buildroot
Dear AUBERT alain,
On Wed, 09 Oct 2013 17:15:13 +0200, AUBERT alain wrote:
> We have already done all steps of the building as you indicated in your mail
>
> The 2 partitions are visible in Uboot with correct pararmeters.
> We have done fatls mmc 0:1 and ext2ls mmc 0:2 to see the contents
>
> Moreover, we have done the same operation with buildroot 2012.05 and the
> beaglebone board works fine
>
> It seems that the problem comes from the use of Flattened devices tree
> in the new version of buildroot
>
> You can find the bootlog in the attached file
I am not following closely the BeagleBone kernels, but from the boot
log it seems like the MMC card is not detected. Several possibilities:
* The MMC support is not enabled in the kernel configuration, or the
proper MMC driver.
* The MMC device is not described in the Device Tree and/or the
support for MMC on this platform is not available.
The version of the kernel being displayed is just 3.8.11, which
indicates a mainline kernel (which doesn't support MMC on AM335x, as
far as I know). However, our beaglebone_defconfig uses a TI custom
kernel, which I believe, should show probably show a different kernel
version than just 3.8.11.
Can you send us your Buildroot .config file?
Best regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] Booting problem for Beaglebone
2013-10-09 15:36 ` Thomas Petazzoni
@ 2013-10-10 7:41 ` AUBERT alain
2013-12-23 15:08 ` Pierre Ficheux
0 siblings, 1 reply; 10+ messages in thread
From: AUBERT alain @ 2013-10-10 7:41 UTC (permalink / raw)
To: buildroot
Dear Thomas
You find in attached file the buildroot .config file
Best regards
Alain
Le 09/10/2013 17:36, Thomas Petazzoni a ?crit :
> Dear AUBERT alain,
>
> On Wed, 09 Oct 2013 17:15:13 +0200, AUBERT alain wrote:
>
>> We have already done all steps of the building as you indicated in your mail
>>
>> The 2 partitions are visible in Uboot with correct pararmeters.
>> We have done fatls mmc 0:1 and ext2ls mmc 0:2 to see the contents
>>
>> Moreover, we have done the same operation with buildroot 2012.05 and the
>> beaglebone board works fine
>>
>> It seems that the problem comes from the use of Flattened devices tree
>> in the new version of buildroot
>>
>> You can find the bootlog in the attached file
> I am not following closely the BeagleBone kernels, but from the boot
> log it seems like the MMC card is not detected. Several possibilities:
>
> * The MMC support is not enabled in the kernel configuration, or the
> proper MMC driver.
>
> * The MMC device is not described in the Device Tree and/or the
> support for MMC on this platform is not available.
>
> The version of the kernel being displayed is just 3.8.11, which
> indicates a mainline kernel (which doesn't support MMC on AM335x, as
> far as I know). However, our beaglebone_defconfig uses a TI custom
> kernel, which I believe, should show probably show a different kernel
> version than just 3.8.11.
>
> Can you send us your Buildroot .config file?
>
> Best regards,
>
> Thomas
-------------- next part --------------
#
# Automatically generated file; DO NOT EDIT.
# Buildroot 2013.08.1 Configuration
#
BR2_HAVE_DOT_CONFIG=y
# BR2_arcle is not set
# BR2_arceb is not set
BR2_arm=y
# BR2_armeb is not set
# BR2_aarch64 is not set
# BR2_avr32 is not set
# BR2_bfin is not set
# BR2_i386 is not set
# BR2_microblazeel is not set
# BR2_microblazebe is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_mips64 is not set
# BR2_mips64el is not set
# BR2_powerpc is not set
# BR2_sh is not set
# BR2_sh64 is not set
# BR2_sparc is not set
# BR2_x86_64 is not set
# BR2_xtensa is not set
BR2_ARCH="arm"
BR2_ENDIAN="LITTLE"
BR2_GCC_TARGET_TUNE="cortex-a8"
BR2_GCC_TARGET_ARCH="armv7-a"
BR2_GCC_TARGET_ABI="aapcs-linux"
BR2_GCC_TARGET_FPU="vfpv3-d16"
BR2_GCC_TARGET_FLOAT_ABI="hard"
BR2_GCC_TARGET_MODE="arm"
BR2_ARM_CPU_HAS_NEON=y
BR2_ARM_CPU_HAS_VFPV2=y
BR2_ARM_CPU_HAS_VFPV3=y
BR2_ARM_CPU_HAS_THUMB2=y
# BR2_arm7tdmi is not set
# BR2_arm720t is not set
# BR2_arm920t is not set
# BR2_arm922t is not set
# BR2_arm926t is not set
# BR2_arm10t is not set
# BR2_arm1136jf_s_r0 is not set
# BR2_arm1136jf_s_r1 is not set
# BR2_arm1176jz_s is not set
# BR2_arm1176jzf_s is not set
# BR2_cortex_a5 is not set
# BR2_cortex_a7 is not set
BR2_cortex_a8=y
# BR2_cortex_a9 is not set
# BR2_cortex_a15 is not set
# BR2_fa526 is not set
# BR2_pj4 is not set
# BR2_strongarm is not set
# BR2_xscale is not set
# BR2_iwmmxt is not set
# BR2_arm1136jf_s is not set
# BR2_ARM_EABI is not set
BR2_ARM_EABIHF=y
# BR2_ARM_FPU_VFPV2 is not set
# BR2_ARM_FPU_VFPV3 is not set
BR2_ARM_FPU_VFPV3D16=y
# BR2_ARM_FPU_NEON is not set
BR2_ARM_INSTRUCTIONS_ARM_CHOICE=y
# BR2_ARM_INSTRUCTIONS_THUMB2 is not set
BR2_ARM_INSTRUCTIONS_ARM=y
#
# Build options
#
#
# Commands
#
BR2_WGET="wget --passive-ftp -nd -t 3"
BR2_SVN="svn"
BR2_BZR="bzr"
BR2_GIT="git"
BR2_LOCALFILES="cp"
BR2_SCP="scp"
BR2_SSH="ssh"
BR2_HG="hg"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_XZCAT="xzcat"
BR2_TAR_OPTIONS=""
BR2_DEFCONFIG="$(CONFIG_DIR)/defconfig"
BR2_DL_DIR="$(TOPDIR)/dl"
BR2_HOST_DIR="$(BASE_DIR)/host"
#
# Mirrors and Download locations
#
BR2_PRIMARY_SITE=""
BR2_BACKUP_SITE="http://sources.buildroot.net/"
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
BR2_DEBIAN_MIRROR="http://ftp.debian.org"
BR2_JLEVEL=0
# BR2_CCACHE is not set
# BR2_DEPRECATED is not set
# BR2_ENABLE_DEBUG is not set
BR2_STRIP_strip=y
# BR2_STRIP_sstrip is not set
# BR2_STRIP_none is not set
BR2_STRIP_EXCLUDE_FILES=""
BR2_STRIP_EXCLUDE_DIRS=""
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
# BR2_OPTIMIZE_3 is not set
BR2_OPTIMIZE_S=y
# BR2_PREFER_STATIC_LIB is not set
BR2_PACKAGE_OVERRIDE_FILE="$(TOPDIR)/local.mk"
BR2_GLOBAL_PATCH_DIR=""
#
# Toolchain
#
BR2_TOOLCHAIN_USES_UCLIBC=y
BR2_TOOLCHAIN_BUILDROOT=y
# BR2_TOOLCHAIN_EXTERNAL is not set
#
# Kernel Header Options
#
# BR2_KERNEL_HEADERS_3_0 is not set
# BR2_KERNEL_HEADERS_3_2 is not set
# BR2_KERNEL_HEADERS_3_4 is not set
# BR2_KERNEL_HEADERS_3_9 is not set
# BR2_KERNEL_HEADERS_3_10 is not set
BR2_KERNEL_HEADERS_VERSION=y
# BR2_KERNEL_HEADERS_SNAP is not set
BR2_DEFAULT_KERNEL_VERSION="3.8.12"
BR2_DEFAULT_KERNEL_HEADERS="3.8.12"
BR2_TOOLCHAIN_BUILDROOT_UCLIBC=y
# BR2_TOOLCHAIN_BUILDROOT_EGLIBC is not set
BR2_TOOLCHAIN_BUILDROOT_LIBC="uclibc"
#
# uClibc Options
#
# BR2_UCLIBC_VERSION_0_9_32 is not set
BR2_UCLIBC_VERSION_0_9_33=y
# BR2_UCLIBC_VERSION_SNAPSHOT is not set
BR2_UCLIBC_VERSION_STRING="0.9.33.2"
BR2_UCLIBC_CONFIG="package/uclibc/uClibc-0.9.33.config"
# BR2_TOOLCHAIN_BUILDROOT_LARGEFILE is not set
# BR2_TOOLCHAIN_BUILDROOT_INET_IPV6 is not set
# BR2_TOOLCHAIN_BUILDROOT_INET_RPC is not set
# BR2_TOOLCHAIN_BUILDROOT_WCHAR is not set
# BR2_TOOLCHAIN_BUILDROOT_LOCALE is not set
# BR2_PTHREADS_NONE is not set
# BR2_PTHREADS is not set
# BR2_PTHREADS_OLD is not set
BR2_PTHREADS_NATIVE=y
# BR2_PTHREAD_DEBUG is not set
BR2_UCLIBC_INSTALL_UTILS=y
# BR2_UCLIBC_INSTALL_TEST_SUITE is not set
BR2_UCLIBC_TARGET_ARCH="arm"
BR2_UCLIBC_ARM_TYPE="ARM_CORTEXA8"
BR2_UCLIBC_ARM_BX=y
#
# Binutils Options
#
BR2_BINUTILS_VERSION_2_22=y
# BR2_BINUTILS_VERSION_2_23_1 is not set
# BR2_BINUTILS_VERSION_2_23_2 is not set
BR2_BINUTILS_VERSION="2.22"
BR2_BINUTILS_EXTRA_CONFIG_OPTIONS=""
#
# GCC Options
#
BR2_GCC_NEEDS_MPC=y
# BR2_GCC_VERSION_4_6_X is not set
BR2_GCC_VERSION_4_7_X=y
# BR2_GCC_VERSION_4_8_X is not set
# BR2_GCC_VERSION_SNAP is not set
BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
BR2_GCC_VERSION="4.7.3"
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
# BR2_INSTALL_OBJC is not set
# BR2_INSTALL_FORTRAN is not set
BR2_GCC_ENABLE_TLS=y
# BR2_GCC_ENABLE_OPENMP is not set
# BR2_PACKAGE_HOST_GDB is not set
BR2_TOOLCHAIN_HAS_THREADS=y
BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS=y
# BR2_ENABLE_LOCALE_PURGE is not set
BR2_GENERATE_LOCALE=""
BR2_NEEDS_GETTEXT=y
BR2_USE_MMU=y
BR2_TARGET_OPTIMIZATION="-pipe"
BR2_TARGET_LDFLAGS=""
# BR2_ECLIPSE_REGISTER is not set
#
# Toolchain Options
#
# BR2_TOOLCHAIN_BUILDROOT_CXX is not set
# BR2_TOOLCHAIN_BUILDROOT_USE_SSP is not set
# BR2_PACKAGE_HOST_ELF2FLT is not set
#
# System configuration
#
BR2_TARGET_GENERIC_HOSTNAME="beaglebone"
BR2_TARGET_GENERIC_ISSUE="Welcome to Dream Team TSE"
# BR2_TARGET_GENERIC_PASSWD_DES is not set
BR2_TARGET_GENERIC_PASSWD_MD5=y
# BR2_TARGET_GENERIC_PASSWD_SHA256 is not set
# BR2_TARGET_GENERIC_PASSWD_SHA512 is not set
BR2_TARGET_GENERIC_PASSWD_METHOD="md5"
# BR2_ROOTFS_DEVICE_CREATION_STATIC is not set
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
# BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV is not set
#
# udev requires a toolchain with LARGEFILE + WCHAR support
#
BR2_INIT_BUSYBOX=y
# BR2_INIT_SYSV is not set
#
# systemd requires largefile, wchar, IPv6, threads and udev support
#
# BR2_INIT_NONE is not set
BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt"
BR2_ROOTFS_SKELETON_DEFAULT=y
# BR2_ROOTFS_SKELETON_CUSTOM is not set
BR2_TARGET_GENERIC_ROOT_PASSWD=""
BR2_TARGET_GENERIC_GETTY_PORT="ttyO0"
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set
BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
BR2_TARGET_GENERIC_GETTY_BAUDRATE="115200"
BR2_TARGET_GENERIC_GETTY_TERM="vt100"
BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y
BR2_ROOTFS_OVERLAY=""
BR2_ROOTFS_POST_BUILD_SCRIPT=""
BR2_ROOTFS_POST_IMAGE_SCRIPT=""
#
# Kernel
#
BR2_LINUX_KERNEL=y
# BR2_LINUX_KERNEL_LATEST_VERSION is not set
# BR2_LINUX_KERNEL_SAME_AS_HEADERS is not set
# BR2_LINUX_KERNEL_CUSTOM_VERSION is not set
# BR2_LINUX_KERNEL_CUSTOM_TARBALL is not set
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git"
BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="935f6c2f82056d538b528272e2bdbb5c08d69a58"
BR2_LINUX_KERNEL_VERSION="935f6c2f82056d538b528272e2bdbb5c08d69a58"
BR2_LINUX_KERNEL_PATCH=""
# BR2_LINUX_KERNEL_USE_DEFCONFIG is not set
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.8.config"
BR2_LINUX_KERNEL_UBOOT_IMAGE=y
BR2_LINUX_KERNEL_UIMAGE=y
# BR2_LINUX_KERNEL_APPENDED_UIMAGE is not set
# BR2_LINUX_KERNEL_ZIMAGE is not set
# BR2_LINUX_KERNEL_APPENDED_ZIMAGE is not set
# BR2_LINUX_KERNEL_VMLINUX is not set
# BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM is not set
BR2_LINUX_KERNEL_UIMAGE_LOADADDR=""
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_USE_INTREE_DTS=y
# BR2_LINUX_KERNEL_USE_CUSTOM_DTS is not set
BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-bone"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
#
# Linux Kernel Extensions
#
# BR2_LINUX_KERNEL_EXT_XENOMAI is not set
# BR2_LINUX_KERNEL_EXT_RTAI is not set
#
# Target packages
#
BR2_PACKAGE_BUSYBOX=y
# BR2_BUSYBOX_VERSION_1_19_X is not set
# BR2_BUSYBOX_VERSION_1_20_X is not set
BR2_BUSYBOX_VERSION_1_21_X=y
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
BR2_BUSYBOX_VERSION="1.21.1"
BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.21.x.config"
# BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
# BR2_PACKAGE_BUSYBOX_WATCHDOG is not set
#
# Audio and video applications
#
#
# alsa-utils requires a toolchain with LARGEFILE and threads support
#
# BR2_PACKAGE_AUMIX is not set
#
# bellagio requires a toolchain with C++ and threads support enabled
#
# BR2_PACKAGE_FAAD2 is not set
# BR2_PACKAGE_FLAC is not set
#
# ffmpeg requires a toolchain with LARGEFILE and IPV6 support
#
#
# gstreamer requires a toolchain with WCHAR and threads support
#
#
# gst-ffmpeg requires a toolchain with LARGEFILE and IPV6 support
#
#
# gstreamer1 requires a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_LAME is not set
# BR2_PACKAGE_LIBVPX is not set
# BR2_PACKAGE_MADPLAY is not set
#
# mpd requires a toolchain with C++, threading and WCHAR support
#
# BR2_PACKAGE_MPG123 is not set
#
# mplayer requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_MUSEPACK is not set
# BR2_PACKAGE_OPUS_TOOLS is not set
#
# pulseaudio requires a toolchain with WCHAR, LARGEFILE and threads support
#
# BR2_PACKAGE_TIDSP_BINARIES is not set
#
# tstools needs largefile support in toolchain
#
# BR2_PACKAGE_VORBIS_TOOLS is not set
# BR2_PACKAGE_WAVPACK is not set
# BR2_PACKAGE_YAVTA is not set
#
# Compressors and decompressors
#
# BR2_PACKAGE_BZIP2 is not set
# BR2_PACKAGE_INFOZIP is not set
# BR2_PACKAGE_LZOP is not set
# BR2_PACKAGE_XZ is not set
#
# Debugging, profiling and benchmark
#
#
# bonnie++ requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_CACHE_CALIBRATOR is not set
# BR2_PACKAGE_DHRYSTONE is not set
#
# dstat requires a toolchain with WCHAR support
#
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_DROPWATCH is not set
#
# gdb/gdbserver require a toolchain with thread and thread debug support
#
# BR2_PACKAGE_IOZONE is not set
# BR2_PACKAGE_KEXEC is not set
#
# latencytop requires a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_LMBENCH is not set
#
# ltp-testsuite requires a toolchain with IPV6, RPC and thread support
#
# BR2_PACKAGE_LTTNG_MODULES is not set
#
# lttng-tools needs LARGEFILE, threads and wchar support
#
# BR2_PACKAGE_LTRACE is not set
# BR2_PACKAGE_MEMSTAT is not set
# BR2_PACKAGE_NETPERF is not set
#
# oprofile requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_PAX_UTILS is not set
#
# perf only available if Linux kernel is enabled, and requires largefile support
#
# BR2_PACKAGE_RAMSPEED is not set
# BR2_PACKAGE_RAMSMP is not set
# BR2_PACKAGE_RT_TESTS is not set
# BR2_PACKAGE_STRACE is not set
# BR2_PACKAGE_STRESS is not set
#
# sysprof requires a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_TINYMEMBENCH is not set
# BR2_PACKAGE_WHETSTONE is not set
# BR2_PACKAGE_VALGRIND is not set
# BR2_PACKAGE_PV is not set
#
# Development tools
#
# BR2_PACKAGE_BINUTILS is not set
#
# bison requires a toolchain with WCHAR support
#
# BR2_PACKAGE_BSDIFF is not set
#
# bustle requires a toolchain with WCHAR support and threading support
#
#
# cvs requires a toolchain with WCHAR support
#
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_FLEX is not set
#
# flex binary requires a toolchain with WCHAR support
#
#
# gettext requires a toolchain with WCHAR support
#
#
# git requires a toolchain with LARGEFILE support
#
#
# gperf requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_MAKE is not set
# BR2_PACKAGE_LIBTOOL is not set
#
# m4 requires a toolchain with WCHAR support
#
# BR2_PACKAGE_PKGCONF is not set
# BR2_PACKAGE_SSTRIP is not set
#
# tree requires a toolchain with WCHAR support
#
#
# Games
#
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_PRBOOM is not set
#
# Graphic libraries and applications (graphic/text)
#
#
# Graphic applications
#
# BR2_PACKAGE_GNUPLOT is not set
#
# jhead requires a toolchain with WCHAR support
#
#
# rrdtool requires a toolchain with WCHAR support
#
#
# graphic libraries
#
#
# cegui06 needs a toolchain with C++ and threads
#
#
# directfb needs a toolchain with C++ and thread support
#
# BR2_PACKAGE_FBDUMP is not set
# BR2_PACKAGE_FBGRAB is not set
#
# fbterm requires a toolchain with C++, WCHAR and locale support
#
# BR2_PACKAGE_FBV is not set
# BR2_PACKAGE_FB_TEST_APP is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
# BR2_PACKAGE_LINUX_FUSION is not set
#
# ocrad needs a toolchain with C++ support
#
# BR2_PACKAGE_SDL is not set
#
# other GUIs
#
#
# EFL requires WCHAR support in toolchain
#
#
# qt requires a toolchain with C++ support enabled
#
#
# Qt5 needs a toolchain with WCHAR, IPv6, thread and C++ support
#
#
# X.org requires a toolchain with WCHAR support
#
#
# weston requires udev
#
#
# X libraries and helper libraries
#
# BR2_PACKAGE_LIBERATION is not set
# BR2_PACKAGE_XKEYBOARD_CONFIG is not set
#
# X Window managers
#
#
# X applications
#
#
# gob2 requires a toolchain with WCHAR support
#
#
# midori requires C++, WCHAR, threading in toolchain and libgtk2
#
#
# Filesystem and flash utilities
#
# BR2_PACKAGE_CIFS_UTILS is not set
# BR2_PACKAGE_CRAMFS is not set
#
# curlftpfs requires a toolchain with LARGEFILE, WCHAR, threading and dynamic library support
#
#
# dosfstools requires a toolchain with LARGEFILE and WCHAR support
#
#
# e2fsprogs requires a toolchain with LARGEFILE + WCHAR support
#
#
# exfat requires a toolchain with LARGEFILE, WCHAR, threads and dynamic library support
#
#
# exfat-utils requires a toolchain with LARGEFILE and WCHAR support
#
#
# f2fs-tools requires a toolchain with LARGEFILE and WCHAR support
#
#
# flashbench requires a toolchain with LARGEFILE support
#
#
# genext2fs requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_GENROMFS is not set
# BR2_PACKAGE_MAKEDEVS is not set
# BR2_PACKAGE_MTD is not set
#
# nfs-utils requires a toolchain with LARGEFILE support
#
#
# ntfs-3g requires a toolchain with LARGEFILE, WCHAR and threads support
#
#
# squashfs requires a toolchain with LARGEFILE and threads support
#
#
# sshfs requires a toolchain with LARGEFILE, WCHAR, threads and dynamic library support
#
# BR2_PACKAGE_SUNXI_TOOLS is not set
#
# unionfs requires a toolchain with LARGEFILE, threads and dynamic library support
#
#
# xfsprogs requires a toolchain with LARGEFILE + WCHAR support
#
#
# Hardware handling
#
#
# Misc devices firmwares
#
BR2_PACKAGE_AM33X_CM3=y
# BR2_PACKAGE_B43_FIRMWARE is not set
# BR2_PACKAGE_LINUX_FIRMWARE is not set
# BR2_PACKAGE_RPI_FIRMWARE is not set
# BR2_PACKAGE_SUNXI_BOARDS is not set
# BR2_PACKAGE_UX500_FIRMWARE is not set
# BR2_PACKAGE_ZD1211_FIRMWARE is not set
#
# Freescale i.MX libraries
#
# BR2_PACKAGE_IMX_LIB is not set
# BR2_PACKAGE_FIRMWARE_IMX is not set
#
# gpu-viv-bin-mx6q requires a glibc toolchain
#
# BR2_PACKAGE_A10DISP is not set
#
# cdrkit requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_DBUS is not set
#
# dmraid requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_DVB_APPS is not set
#
# dvbsnoop requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_EEPROG is not set
# BR2_PACKAGE_EVTEST is not set
# BR2_PACKAGE_FAN_CTRL is not set
# BR2_PACKAGE_FCONFIG is not set
# BR2_PACKAGE_FIS is not set
# BR2_PACKAGE_FMTOOLS is not set
# BR2_PACKAGE_FXLOAD is not set
# BR2_PACKAGE_GADGETFS_TEST is not set
# BR2_PACKAGE_GPSD is not set
#
# gptfdisk requires a toolchain with LARGEFILE/WCHAR/C++ support enabled
#
#
# gvfs requires a toolchain with LARGEFILE, WCHAR and threading support
#
# BR2_PACKAGE_HWDATA is not set
# BR2_PACKAGE_I2C_TOOLS is not set
# BR2_PACKAGE_INPUT_EVENT_DAEMON is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_IRDA_UTILS is not set
# BR2_PACKAGE_KBD is not set
# BR2_PACKAGE_LCDPROC is not set
# BR2_PACKAGE_LM_SENSORS is not set
#
# lshw requires a toolchain with C++, LARGEFILE & WCHAR support enabled
#
# BR2_PACKAGE_LSUIO is not set
#
# lvm2 requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_MDADM is not set
# BR2_PACKAGE_MEDIA_CTL is not set
#
# memtester requires a toolchain with LARGEFILE support
#
#
# minicom requires a toolchain with WCHAR support
#
# BR2_PACKAGE_NANOCOM is not set
#
# neard requires a toolchain with WCHAR and threads support
#
#
# ofono requires a toolchain with WCHAR and thread support
#
# BR2_PACKAGE_OPEN2300 is not set
# BR2_PACKAGE_OPENOCD is not set
#
# owl-linux is only supported on ARM9 architecture
#
#
# parted requires a toolchain with LARGEFILE+WCHAR support
#
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_PICOCOM is not set
# BR2_PACKAGE_RNG_TOOLS is not set
#
# rpi-userland requires a toolchain with C++ and LARGEFILE support
#
# BR2_PACKAGE_SANE_BACKENDS is not set
# BR2_PACKAGE_SDPARM is not set
# BR2_PACKAGE_SETSERIAL is not set
#
# sg3-utils requires a toolchain with LARGEFILE and threads support
#
#
# smartmontools requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_SNOWBALL_HDMISERVICE is not set
# BR2_PACKAGE_SREDIRD is not set
# BR2_PACKAGE_STATSERIAL is not set
#
# sunxi-cedarx requires an eglibc/glibc based toolchain
#
#
# sunxi-mali requires an eglibc/glibc based toolchain
#
# BR2_PACKAGE_SYSSTAT is not set
#
# ti-gfx requires an eglibc/glibc based toolchain and the linux kernel
#
# BR2_PACKAGE_TI_UTILS is not set
# BR2_PACKAGE_UBOOT_TOOLS is not set
#
# udev requires /dev mgmnt set to udev under System configuration
#
#
# udisks requires /dev mgmnt set to udev under System configuration and a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_USB_MODESWITCH is not set
# BR2_PACKAGE_USB_MODESWITCH_DATA is not set
#
# usbmount requires udev to be enabled
#
# BR2_PACKAGE_USBUTILS is not set
# BR2_PACKAGE_WIPE is not set
# BR2_PACKAGE_W_SCAN is not set
#
# Interpreter languages and scripting
#
# BR2_PACKAGE_ERLANG is not set
# BR2_PACKAGE_ENSCRIPT is not set
# BR2_PACKAGE_HASERL is not set
#
# jamvm requires a toolchain with IPV6 support
#
# BR2_PACKAGE_JIMTCL is not set
# BR2_PACKAGE_LUA is not set
# BR2_PACKAGE_LUAJIT is not set
#
# nodejs requires a toolchain with C++, IPv6, large files, and threading
#
# BR2_PACKAGE_PERL is not set
# BR2_PACKAGE_PHP is not set
#
# python requires a toolchain with WCHAR support
#
#
# python3 requires a toolchain with WCHAR support
#
#
# ruby requires a toolchain with WCHAR support
#
# BR2_PACKAGE_TCL is not set
#
# Libraries
#
#
# Audio/Sound
#
# BR2_PACKAGE_ALSA_LIB is not set
#
# audiofile requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_CELT051 is not set
#
# fdk-aac requires a toolchain with C++ support
#
# BR2_PACKAGE_LIBAO is not set
# BR2_PACKAGE_LIBCDAUDIO is not set
# BR2_PACKAGE_LIBCUE is not set
# BR2_PACKAGE_LIBCUEFILE is not set
# BR2_PACKAGE_LIBID3TAG is not set
# BR2_PACKAGE_LIBLO is not set
# BR2_PACKAGE_LIBMAD is not set
#
# libmpd requires a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_LIBREPLAYGAIN is not set
# BR2_PACKAGE_LIBSAMPLERATE is not set
#
# libsndfile requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LIBVORBIS is not set
# BR2_PACKAGE_OPUS is not set
# BR2_PACKAGE_PORTAUDIO is not set
# BR2_PACKAGE_SPEEX is not set
#
# taglib requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_TREMOR is not set
#
# webrtc-audio-processing requires a toolchain with C++ support enabled
#
#
# Compression and decompression
#
#
# libarchive requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LZO is not set
#
# snappy requires a toolchain with C++ support
#
# BR2_PACKAGE_ZLIB is not set
#
# Crypto
#
# BR2_PACKAGE_BEECRYPT is not set
# BR2_PACKAGE_CRYPTODEV is not set
#
# gnutls requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LIBGCRYPT is not set
# BR2_PACKAGE_LIBGPG_ERROR is not set
# BR2_PACKAGE_LIBGPGME is not set
# BR2_PACKAGE_LIBASSUAN is not set
# BR2_PACKAGE_LIBMCRYPT is not set
# BR2_PACKAGE_LIBMHASH is not set
#
# libnss requires a toolchain with LARGEFILE and thread support
#
# BR2_PACKAGE_LIBSHA1 is not set
# BR2_PACKAGE_NETTLE is not set
# BR2_PACKAGE_OPENSSL is not set
# BR2_PACKAGE_POLARSSL is not set
#
# Database
#
# BR2_PACKAGE_BERKELEYDB is not set
# BR2_PACKAGE_GDBM is not set
#
# Mysql client requires a toolchain with C++ support enabled
#
#
# redis needs a toolchain with LARGEFILE and thread support
#
# BR2_PACKAGE_SQLCIPHER is not set
# BR2_PACKAGE_SQLITE is not set
#
# Filesystem
#
#
# gamin requires a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_LIBCONFIG is not set
# BR2_PACKAGE_LIBCONFUSE is not set
#
# libfuse requires a toolchain with LARGEFILE, threads and dyanmic library support
#
# BR2_PACKAGE_LIBLOCKFILE is not set
# BR2_PACKAGE_LIBSYSFS is not set
# BR2_PACKAGE_LOCKDEV is not set
#
# Graphics
#
#
# atk requires a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_CAIRO is not set
# BR2_PACKAGE_FONTCONFIG is not set
# BR2_PACKAGE_FREETYPE is not set
# BR2_PACKAGE_GD is not set
# BR2_PACKAGE_IMLIB2 is not set
# BR2_PACKAGE_JPEG is not set
# BR2_PACKAGE_LCMS2 is not set
# BR2_PACKAGE_LIBART is not set
# BR2_PACKAGE_LIBDMTX is not set
# BR2_PACKAGE_LIBEXIF is not set
# BR2_PACKAGE_LIBGEOTIFF is not set
#
# gdk-pixbuf depends on toolchain with WCHAR and threading support
#
#
# libgtk2 requires a toolchain with WCHAR, threading and C++ support
#
# BR2_PACKAGE_LIBPNG is not set
# BR2_PACKAGE_LIBQRENCODE is not set
#
# libraw requires a toolchain with C++ support enabled
#
#
# librsvg requires a toolchain with WCHAR, threading and C++ support
#
# BR2_PACKAGE_LIBSVG is not set
# BR2_PACKAGE_LIBSVG_CAIRO is not set
# BR2_PACKAGE_LIBSVGTINY is not set
# BR2_PACKAGE_LIBUNGIF is not set
#
# opencv requires a toolchain with C++ and WCHAR support
#
#
# pango requires a toolchain with WCHAR, threading and C++ support
#
# BR2_PACKAGE_PIXMAN is not set
#
# poppler requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_TIFF is not set
# BR2_PACKAGE_WAYLAND is not set
#
# webkit requires libgtk2 and a toolchain with C++, WCHAR, threading support
#
# BR2_PACKAGE_WEBP is not set
#
# zxing requires a toolchain with C++ support
#
#
# Hardware handling
#
# BR2_PACKAGE_CCID is not set
# BR2_PACKAGE_DTC is not set
#
# lcdapi requires a toolchain with C++ and thread support enabled
#
# BR2_PACKAGE_LIBAIO is not set
#
# libatasmart requires udev to be enabled
#
#
# libcec requires C++ and threading support in toolchain
#
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_TSLIB is not set
# BR2_PACKAGE_LIBFREEFARE is not set
# BR2_PACKAGE_LIBFTDI is not set
# BR2_PACKAGE_LIBHID is not set
# BR2_PACKAGE_LIBIQRF is not set
# BR2_PACKAGE_LIBNFC is not set
# BR2_PACKAGE_LIBNFC_LLCP is not set
#
# libqmi requires a toolchain with WCHAR and threading support
#
#
# libserial requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LIBUSB is not set
#
# libv4l requires a toolchain with LARGEFILE and thread support
#
# BR2_PACKAGE_LIBXKBCOMMON is not set
# BR2_PACKAGE_MTDEV is not set
# BR2_PACKAGE_NE10 is not set
#
# neardal requires a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_PCSC_LITE is not set
#
# urg requires a toolchain with C++ support
#
#
# Javascript
#
# BR2_PACKAGE_EXPLORERCANVAS is not set
# BR2_PACKAGE_FLOT is not set
# BR2_PACKAGE_JQUERY is not set
# BR2_PACKAGE_JQUERY_KEYBOARD is not set
# BR2_PACKAGE_JQUERY_SPARKLINE is not set
# BR2_PACKAGE_JQUERY_UI is not set
# BR2_PACKAGE_JQUERY_VALIDATION is not set
# BR2_PACKAGE_JSMIN is not set
# BR2_PACKAGE_JSON_JAVASCRIPT is not set
#
# Multimedia
#
#
# libdvbsi++ requires a toolchain with C++, WCHAR and threads support
#
#
# libdvdread requires a toolchain with LARGEFILE support
#
#
# libdvdnav requires a toolchain with LARGEFILE and thread support
#
#
# libebml requires a toolchain with C++ support
#
# BR2_PACKAGE_LIBFSLCODEC is not set
# BR2_PACKAGE_LIBFSLPARSER is not set
# BR2_PACKAGE_LIBFSLVPUWRAP is not set
#
# libmatroska requires a toolchain with C++ support
#
#
# libmms requires a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_LIBMPEG2 is not set
# BR2_PACKAGE_LIBOGG is not set
#
# libplayer requires a toolchain with LARGEFILE and threads support
#
# BR2_PACKAGE_LIBTHEORA is not set
#
# Live555 needs C++ compiler
#
#
# mediastreamer requires a toolchain with threads and C++ support
#
#
# Networking
#
#
# czmq requires a toolchain with C++, IPV6, LARGEFILE and WCHAR support
#
#
# cppzmq requires a toolchain with C++, IPV6, LARGEFILE and WCHAR support
#
#
# filemq requires a toolchain with C++, IPv6, LARGEFILE, WCHAR & thread support
#
#
# glib-networking requires a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_LIBCGI is not set
#
# libcgicc requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LIBCURL is not set
# BR2_PACKAGE_LIBDNET is not set
# BR2_PACKAGE_LIBESMTP is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBFCGI is not set
# BR2_PACKAGE_LIBGSASL is not set
# BR2_PACKAGE_LIBIDN is not set
# BR2_PACKAGE_LIBISCSI is not set
# BR2_PACKAGE_LIBOAUTH is not set
# BR2_PACKAGE_LIBMICROHTTPD is not set
# BR2_PACKAGE_NEON is not set
#
# libmnl requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LIBMODBUS is not set
# BR2_PACKAGE_LIBMBUS is not set
#
# libnetfilter_acct requires a toolchain with LARGEFILE support
#
#
# libnetfilter_conntrack requires a toolchain with LARGEFILE support
#
#
# libnetfilter_cthelper requires a toolchain with LARGEFILE support
#
#
# libnetfilter_cttimout requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LIBNETFILTER_LOG is not set
#
# libnetfilter_queue requires a toolchain with LARGEFILE and IPv6 support
#
# BR2_PACKAGE_LIBNFNETLINK is not set
# BR2_PACKAGE_LIBNL is not set
#
# liboping requires a toolchain with IPv6 support enabled
#
# BR2_PACKAGE_LIBPCAP is not set
# BR2_PACKAGE_LIBOSIP2 is not set
# BR2_PACKAGE_LIBRSYNC is not set
#
# libsoup requires a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_LIBTIRPC is not set
#
# libtorrent requires a toolchain with C++ and threads support enabled
#
#
# libupnp requires a toolchain with LARGEFILE and thread support
#
# BR2_PACKAGE_LIBVNCSERVER is not set
# BR2_PACKAGE_LIBWEBSOCKETS is not set
#
# openpgm needs a toolchain with WCHAR, threads and IPv6 support
#
# BR2_PACKAGE_ORTP is not set
# BR2_PACKAGE_SLIRP is not set
# BR2_PACKAGE_USBREDIR is not set
#
# wvstreams requires a toolchain with C++ and largefile support enabled
#
#
# zeromq requires a toolchain with C++, IPV6, LARGEFILE, WCHAR & thread support
#
#
# zmqpp requires a toolchain with C++, IPV6, LARGEFILE, WCHAR & thread support
#
#
# zyre requires a toolchain with C++, IPv6, LARGEFILE, WCHAR & thread support
#
#
# Other
#
# BR2_PACKAGE_APR is not set
# BR2_PACKAGE_APR_UTIL is not set
# BR2_PACKAGE_LIBCOFI is not set
#
# classpath requires a toolchain with IPV6 support
#
#
# cppcms requires a glibc toolchain with C++ support
#
#
# elfutils requires a toolchain with LARGEFILE and WCHAR support
#
# BR2_PACKAGE_FFTW is not set
# BR2_PACKAGE_LIBARGTABLE2 is not set
# BR2_PACKAGE_ARGP_STANDALONE is not set
#
# boost requires a toolchain with C++, large file and thread support enabled
#
#
# glibmm requires a toolchain with C++, WCHAR, and threading support
#
# BR2_PACKAGE_GMP is not set
# BR2_PACKAGE_GSL is not set
#
# gtest requires a toolchain with c++, WCHAR and THREADS support
#
# BR2_PACKAGE_LIBATOMIC_OPS is not set
# BR2_PACKAGE_LIBCAP is not set
# BR2_PACKAGE_LIBCAP_NG is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
# BR2_PACKAGE_LIBEV is not set
# BR2_PACKAGE_LIBFFI is not set
#
# libglib2 requires a toolchain with WCHAR support and threading support
#
#
# libical requires a toolchain with WCHAR support
#
#
# libnspr requires a toolchain with LARGEFILE and threads support
#
# BR2_PACKAGE_LIBPFM4 is not set
# BR2_PACKAGE_LIBPTHSEM is not set
#
# libsigc++ requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LIBSIGSEGV is not set
# BR2_PACKAGE_LIBTASN1 is not set
# BR2_PACKAGE_LIBTPL is not set
# BR2_PACKAGE_LIBUNWIND is not set
# BR2_PACKAGE_LIBURCU is not set
#
# linux-pam requires a toolchain with WCHAR and locale support
#
#
# log4cxx requires C++ support in toolchain
#
# BR2_PACKAGE_MPC is not set
# BR2_PACKAGE_MPFR is not set
#
# msgpack requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_MTDEV2TUIO is not set
# BR2_PACKAGE_ORC is not set
# BR2_PACKAGE_P11_KIT is not set
#
# poco requires a toolchain with WCHAR, threads, and C++ support
#
#
# protobuf requires a toolchain with C++ support enabled
#
#
# protobuf-c requires a toolchain with C++ support enabled
#
#
# schifra requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LIBLOG4C_LOCALTIME is not set
#
# Text and terminal handling
#
#
# enchant requires a toolchain with C++, threading and WCHAR support enabled
#
# BR2_PACKAGE_LIBFRIBIDI is not set
#
# icu requires a toolchain with C++ support and WCHAR enabled
#
#
# libedit requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LIBICONV is not set
# BR2_PACKAGE_LINENOISE is not set
# BR2_PACKAGE_NCURSES is not set
# BR2_PACKAGE_NEWT is not set
# BR2_PACKAGE_PCRE is not set
# BR2_PACKAGE_POPT is not set
# BR2_PACKAGE_READLINE is not set
# BR2_PACKAGE_SLANG is not set
#
# JSON/XML
#
# BR2_PACKAGE_CJSON is not set
# BR2_PACKAGE_EXPAT is not set
# BR2_PACKAGE_EZXML is not set
# BR2_PACKAGE_JANSSON is not set
# BR2_PACKAGE_JSON_C is not set
#
# json-glib requires a toolchain with WCHAR and threading support
#
#
# libjson requires a toolchain with C++ support
#
# BR2_PACKAGE_LIBROXML is not set
# BR2_PACKAGE_LIBXML2 is not set
#
# libxml++ requires a toolchain with C++, WCHAR and threading support
#
# BR2_PACKAGE_LIBXSLT is not set
# BR2_PACKAGE_LIBYAML is not set
# BR2_PACKAGE_MXML is not set
# BR2_PACKAGE_RAPIDJSON is not set
#
# xerces-c++ requires a toolchain with C++ and WCHAR support enabled
#
# BR2_PACKAGE_YAJL is not set
#
# Miscellaneous
#
# BR2_PACKAGE_AESPIPE is not set
#
# collectd needs a toolchain with IPv6 and thread support
#
# BR2_PACKAGE_EMPTY is not set
# BR2_PACKAGE_GOOGLEFONTDIRECTORY is not set
# BR2_PACKAGE_MCRYPT is not set
# BR2_PACKAGE_MOBILE_BROADBAND_PROVIDER_INFO is not set
#
# shared-mime-info requires a toolchain with WCHAR and threading support
#
#
# snowball-init requires a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_SOUND_THEME_BOREALIS is not set
# BR2_PACKAGE_SOUND_THEME_FREEDESKTOP is not set
#
# Networking applications
#
#
# aircrack-ng needs a toolchain with largefile and threads support
#
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_ARPTABLES is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set
#
# bcusdk requires a toolchain with C++ support
#
#
# bluez-utils require a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_BOA is not set
#
# bind requires a toolchain with LARGEFILE and IPV6 support
#
#
# bmon requires a toolchain with IPv6 support
#
# BR2_PACKAGE_BRIDGE_UTILS is not set
# BR2_PACKAGE_BWM_NG is not set
# BR2_PACKAGE_CAN_UTILS is not set
# BR2_PACKAGE_CHRONY is not set
#
# connman needs a toolchain with IPv6, WCHAR, threading and resolver support
#
# BR2_PACKAGE_CRDA is not set
#
# ctorrent requires a toolchain with C++ support enabled
#
#
# conntrack-tools requires a toolchain with IPV6 and LARGEFILE support
#
# BR2_PACKAGE_CUPS is not set
#
# gutenprint requires a toolchain with C++ support enabled
#
#
# hplip requires a toolchain with C++ and thread support enabled
#
#
# dhcpcd requires a toolchain with IPV6 support
#
# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_DNSMASQ is not set
# BR2_PACKAGE_DROPBEAR is not set
#
# ebtables requires a toolchain with IPv6 support
#
# BR2_PACKAGE_ETHTOOL is not set
#
# gesftpserver requires a toolchain with WCHAR and threads support
#
# BR2_PACKAGE_HEIRLOOM_MAILX is not set
# BR2_PACKAGE_HIAWATHA is not set
# BR2_PACKAGE_HOSTAPD is not set
# BR2_PACKAGE_HTTPING is not set
#
# iftop requires IPv6 and threads support in toolchain
#
# BR2_PACKAGE_IGH_ETHERCAT is not set
# BR2_PACKAGE_INADYN is not set
#
# iperf requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_IPROUTE2 is not set
# BR2_PACKAGE_IPSEC_TOOLS is not set
#
# ipset requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_IPTABLES is not set
# BR2_PACKAGE_IW is not set
#
# Kismet requires a toolchain with thread and C++ support enabled
#
# BR2_PACKAGE_LIGHTTPD is not set
#
# linknx requires a toolchain with C++ support
#
# BR2_PACKAGE_LINKS is not set
#
# linphone requires a toolchain with threads and C++ support enabled
#
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_MACCHANGER is not set
# BR2_PACKAGE_MII_DIAG is not set
#
# minidlna requires a toolchain with LARGEFILE and IPV6 support
#
# BR2_PACKAGE_MONGOOSE is not set
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_MSMTP is not set
#
# mutt requires a toolchain with WCHAR support
#
#
# nbd requires a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_NCFTP is not set
#
# ndisc6 requires a toolchain with IPv6 support
#
# BR2_PACKAGE_NETATALK is not set
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set
# BR2_PACKAGE_NETSTAT_NAT is not set
#
# NetworkManager requires a toolchain with IPV6, LARGEFILE, WCHAR and thread support
#
#
# nfacct requires a toolchain with LARGEFILE support
#
#
# nmap requires a toolchain with C++, IPV6 and thread support
#
# BR2_PACKAGE_NOIP is not set
# BR2_PACKAGE_NGIRCD is not set
# BR2_PACKAGE_NGREP is not set
# BR2_PACKAGE_NTP is not set
# BR2_PACKAGE_NUTTCP is not set
#
# olsr requires a toolchain with IPv6 and threads support
#
# BR2_PACKAGE_OPENNTPD is not set
#
# openobex requires a toolchain with IPV6 support
#
# BR2_PACKAGE_OPENSSH is not set
# BR2_PACKAGE_OPENSWAN is not set
#
# openvpn requires a toolchain with IPV6 support
#
#
# portmap requires a toolchain with RPC support
#
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PROFTPD is not set
# BR2_PACKAGE_PROXYCHAINS_NG is not set
# BR2_PACKAGE_PTPD is not set
# BR2_PACKAGE_PTPD2 is not set
# BR2_PACKAGE_QUAGGA is not set
#
# radvd requires a toolchain with IPV6 support
#
# BR2_PACKAGE_RPCBIND is not set
# BR2_PACKAGE_RSH_REDONE is not set
# BR2_PACKAGE_RSYNC is not set
#
# rtorrent requires a toolchain with C++, threads and WCHAR support
#
# BR2_PACKAGE_SAMBA is not set
#
# sconeserver requires a toolchain with C++ and thread support enabled
#
#
# ser2net requires a toolchain with IPV6 support
#
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_SOCKETCAND is not set
# BR2_PACKAGE_SPAWN_FCGI is not set
# BR2_PACKAGE_SPICE_PROTOCOL is not set
#
# Squid requires a toolchain with C++ and IPv6 support enabled
#
# BR2_PACKAGE_STRONGSWAN is not set
# BR2_PACKAGE_STUNNEL is not set
# BR2_PACKAGE_TCPDUMP is not set
# BR2_PACKAGE_TCPREPLAY is not set
# BR2_PACKAGE_THTTPD is not set
# BR2_PACKAGE_TINYHTTPD is not set
# BR2_PACKAGE_TN5250 is not set
#
# Transmission requires a toolchain with IPv6 and threads support
#
#
# tvheadend needs a toolchain with LARGEFILE, IPv6 and THREADS support
#
#
# udpcast requires a toolchain with LARGEFILE and threads support
#
#
# ulogd requires a toolchain with IPV6 and LARGEFILE support
#
#
# ushare requires a toolchain with LARGEFILE and thread support
#
#
# ussp-push require a toolchain with WCHAR, IPV6 and thread support
#
# BR2_PACKAGE_VDE2 is not set
# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VSFTPD is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WIRELESS_REGDB is not set
# BR2_PACKAGE_WIRELESS_TOOLS is not set
#
# wireshark requires a toolchain with WCHAR and threading support
#
# BR2_PACKAGE_WPA_SUPPLICANT is not set
#
# wvdial requires a toolchain with C++ and largefile support enabled
#
# BR2_PACKAGE_XINETD is not set
# BR2_PACKAGE_XL2TP is not set
#
# Package managers
#
# BR2_PACKAGE_IPKG is not set
# BR2_PACKAGE_OPKG is not set
#
# Real-Time
#
# BR2_PACKAGE_XENOMAI is not set
#
# Shell and utilities
#
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_DIALOG is not set
# BR2_PACKAGE_DTACH is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_GNUPG is not set
#
# inotify-tools requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LOCKFILE_PROGS is not set
#
# logrotate requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LOGSURFER is not set
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_SUDO is not set
# BR2_PACKAGE_XMLSTARLET is not set
#
# System tools
#
#
# acl requires a toolchain with LARGEFILE support
#
#
# attr requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_CPULOAD is not set
# BR2_PACKAGE_HTOP is not set
# BR2_PACKAGE_KEYUTILS is not set
# BR2_PACKAGE_KMOD is not set
# BR2_PACKAGE_MONIT is not set
# BR2_PACKAGE_NCDU is not set
#
# numactl requires a toolchain with LARGEFILE support
#
#
# polkit requires a toolchain with WCHAR and threading support
#
#
# quota requires a toolchain with LARGEFILE + WCHAR support
#
#
# supervisor needs the python interpreter
#
#
# systemd not available (depends on /dev management with udev and ipv6 support, and thread support in toolchain)
#
#
# util-linux requires a toolchain with LARGEFILE + WCHAR support
#
# BR2_PACKAGE_DSP_TOOLS is not set
#
# Text editors and viewers
#
# BR2_PACKAGE_ED is not set
# BR2_PACKAGE_NANO is not set
# BR2_PACKAGE_UEMACS is not set
#
# Filesystem images
#
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_CRAMFS is not set
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_2=y
BR2_TARGET_ROOTFS_EXT2_2r0=y
# BR2_TARGET_ROOTFS_EXT2_2r1 is not set
# BR2_TARGET_ROOTFS_EXT2_3 is not set
# BR2_TARGET_ROOTFS_EXT2_4 is not set
BR2_TARGET_ROOTFS_EXT2_GEN=2
BR2_TARGET_ROOTFS_EXT2_REV=0
BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
# BR2_TARGET_ROOTFS_EXT2_LZO is not set
# BR2_TARGET_ROOTFS_EXT2_XZ is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_ROMFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
# BR2_TARGET_ROOTFS_UBIFS is not set
#
# Bootloaders
#
# BR2_TARGET_BAREBOX is not set
# BR2_TARGET_MXS_BOOTLETS is not set
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="am335x_evm"
# BR2_TARGET_UBOOT_LATEST_VERSION is not set
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
# BR2_TARGET_UBOOT_CUSTOM_TARBALL is not set
# BR2_TARGET_UBOOT_CUSTOM_GIT is not set
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.04"
BR2_TARGET_UBOOT_VERSION="2013.04"
BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR=""
# BR2_TARGET_UBOOT_FORMAT_AIS is not set
# BR2_TARGET_UBOOT_FORMAT_BIN is not set
BR2_TARGET_UBOOT_FORMAT_IMG=y
# BR2_TARGET_UBOOT_FORMAT_NAND_BIN is not set
# BR2_TARGET_UBOOT_FORMAT_KWB is not set
# BR2_TARGET_UBOOT_FORMAT_ELF is not set
# BR2_TARGET_UBOOT_FORMAT_SB is not set
# BR2_TARGET_UBOOT_FORMAT_CUSTOM is not set
# BR2_TARGET_UBOOT_NETWORK is not set
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="MLO"
# BR2_TARGET_UBOOT_ENVIMAGE is not set
# BR2_TARGET_XLOADER is not set
#
# Host utilities
#
# BR2_PACKAGE_HOST_DFU_UTIL is not set
# BR2_PACKAGE_HOST_DOSFSTOOLS is not set
BR2_PACKAGE_HOST_E2FSPROGS=y
BR2_PACKAGE_HOST_GENEXT2FS=y
# BR2_PACKAGE_HOST_GENIMAGE is not set
# BR2_PACKAGE_HOST_GENPART is not set
# BR2_PACKAGE_HOST_LPC3250LOADER is not set
# BR2_PACKAGE_HOST_MTOOLS is not set
# BR2_PACKAGE_HOST_OMAP_U_BOOT_UTILS is not set
# BR2_PACKAGE_HOST_OPENOCD is not set
# BR2_PACKAGE_HOST_SAM_BA is not set
# BR2_PACKAGE_HOST_SUNXI_TOOLS is not set
# BR2_PACKAGE_HOST_UBOOT_TOOLS is not set
#
# Legacy config options
#
#
# Legacy options removed in 2013.08
#
# BR2_ARM_OABI is not set
# BR2_PACKAGE_DOSFSTOOLS_DOSFSCK is not set
# BR2_PACKAGE_DOSFSTOOLS_DOSFSLABEL is not set
# BR2_PACKAGE_DOSFSTOOLS_MKDOSFS is not set
# BR2_ELF2FLT is not set
# BR2_VFP_FLOAT is not set
# BR2_PACKAGE_GCC_TARGET is not set
# BR2_HAVE_DEVFILES is not set
#
# Legacy options removed in 2013.05
#
# BR2_PACKAGE_LINUX_FIRMWARE_RTL_8192 is not set
# BR2_PACKAGE_LINUX_FIRMWARE_RTL_8712 is not set
#
# Legacy options removed in 2013.02
#
# BR2_sa110 is not set
# BR2_sa1100 is not set
# BR2_PACKAGE_GDISK is not set
# BR2_PACKAGE_GDISK_GDISK is not set
# BR2_PACKAGE_GDISK_SGDISK is not set
# BR2_PACKAGE_GDB_HOST is not set
# BR2_PACKAGE_DIRECTB_DITHER_RGB16 is not set
# BR2_PACKAGE_DIRECTB_TESTS is not set
#
# Legacy options removed in 2012.11
#
# BR2_PACKAGE_CUSTOMIZE is not set
# BR2_PACKAGE_XSERVER_xorg is not set
# BR2_PACKAGE_XSERVER_tinyx is not set
#
# Legacy options removed in 2012.08
#
# BR2_PACKAGE_GETTEXT_STATIC is not set
# BR2_PACKAGE_LIBINTL is not set
# BR2_PACKAGE_INPUT_TOOLS_EVTEST is not set
# BR2_BFIN_FDPIC is not set
# BR2_BFIN_FLAT is not set
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] Booting problem for Beaglebone
2013-10-10 7:41 ` AUBERT alain
@ 2013-12-23 15:08 ` Pierre Ficheux
2013-12-23 16:45 ` Thomas Petazzoni
0 siblings, 1 reply; 10+ messages in thread
From: Pierre Ficheux @ 2013-12-23 15:08 UTC (permalink / raw)
To: buildroot
Hi,
I still have the same problem with recent BR (2013.11 or Git) and Beaglebone Black (waiting for root device)
[ 4.690564] host=10.5.16.129, domain=daviel.openwide.fr., nis-domain=(none)
[ 4.698407] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath=
[ 4.704779] nameserver0=10.5.1.1[ 4.712875] Waiting for root device /dev/mmcblk0p4...
Any idea?
Thx by advance
----- Mail original -----
> De: "AUBERT alain" <alain.aubert@univ-st-etienne.fr>
> ?: "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com>
> Cc: buildroot at busybox.net
> Envoy?: Jeudi 10 Octobre 2013 09:41:54
> Objet: Re: [Buildroot] Booting problem for Beaglebone
>
> Dear Thomas
>
> You find in attached file the buildroot .config file
>
> Best regards
>
> Alain
>
>
>
>
>
> Le 09/10/2013 17:36, Thomas Petazzoni a ?crit :
> > Dear AUBERT alain,
> >
> > On Wed, 09 Oct 2013 17:15:13 +0200, AUBERT alain wrote:
> >
> >> We have already done all steps of the building as you indicated in
> >> your mail
> >>
> >> The 2 partitions are visible in Uboot with correct pararmeters.
> >> We have done fatls mmc 0:1 and ext2ls mmc 0:2 to see the contents
> >>
> >> Moreover, we have done the same operation with buildroot 2012.05
> >> and the
> >> beaglebone board works fine
> >>
> >> It seems that the problem comes from the use of Flattened devices
> >> tree
> >> in the new version of buildroot
> >>
> >> You can find the bootlog in the attached file
> > I am not following closely the BeagleBone kernels, but from the
> > boot
> > log it seems like the MMC card is not detected. Several
> > possibilities:
> >
> > * The MMC support is not enabled in the kernel configuration, or
> > the
> > proper MMC driver.
> >
> > * The MMC device is not described in the Device Tree and/or the
> > support for MMC on this platform is not available.
> >
> > The version of the kernel being displayed is just 3.8.11, which
> > indicates a mainline kernel (which doesn't support MMC on AM335x,
> > as
> > far as I know). However, our beaglebone_defconfig uses a TI custom
> > kernel, which I believe, should show probably show a different
> > kernel
> > version than just 3.8.11.
> >
> > Can you send us your Buildroot .config file?
> >
> > Best regards,
> >
> > Thomas
>
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
Pierre FICHEUX -/- CTO OW/OWI, France -\- pierre.ficheux at openwide.fr
http://ingenierie.openwide.fr
http://www.linuxembedded.fr
I would love to change the world, but they won't give me the source code
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] Booting problem for Beaglebone
2013-12-23 15:08 ` Pierre Ficheux
@ 2013-12-23 16:45 ` Thomas Petazzoni
2013-12-23 16:51 ` Pierre Ficheux
0 siblings, 1 reply; 10+ messages in thread
From: Thomas Petazzoni @ 2013-12-23 16:45 UTC (permalink / raw)
To: buildroot
Dear Pierre Ficheux,
On Mon, 23 Dec 2013 16:08:18 +0100 (CET), Pierre Ficheux wrote:
> I still have the same problem with recent BR (2013.11 or Git) and Beaglebone Black (waiting for root device)
>
> [ 4.690564] host=10.5.16.129, domain=daviel.openwide.fr., nis-domain=(none)
> [ 4.698407] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath=
> [ 4.704779] nameserver0=10.5.1.1[ 4.712875] Waiting for root device /dev/mmcblk0p4...
It generally means that the MMC driver is missing, or that the MMC
controller is not properly described in the Device Tree.
Best regards,
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] Booting problem for Beaglebone
2013-12-23 16:45 ` Thomas Petazzoni
@ 2013-12-23 16:51 ` Pierre Ficheux
2013-12-23 21:47 ` Thomas Petazzoni
0 siblings, 1 reply; 10+ messages in thread
From: Pierre Ficheux @ 2013-12-23 16:51 UTC (permalink / raw)
To: buildroot
I guess :) but my question was "is there any work in progress to fix it ?" before trying by myself !
regards
----- Mail original -----
> De: "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com>
> ?: "Pierre Ficheux" <pierre.ficheux@openwide.fr>
> Cc: buildroot at busybox.net
> Envoy?: Lundi 23 D?cembre 2013 17:45:22
> Objet: Re: [Buildroot] Booting problem for Beaglebone
>
> Dear Pierre Ficheux,
>
> On Mon, 23 Dec 2013 16:08:18 +0100 (CET), Pierre Ficheux wrote:
>
> > I still have the same problem with recent BR (2013.11 or Git) and
> > Beaglebone Black (waiting for root device)
> >
> > [ 4.690564] host=10.5.16.129, domain=daviel.openwide.fr.,
> > nis-domain=(none)
> > [ 4.698407] bootserver=0.0.0.0, rootserver=0.0.0.0,
> > rootpath=
> > [ 4.704779] nameserver0=10.5.1.1[ 4.712875] Waiting for
> > root device /dev/mmcblk0p4...
>
> It generally means that the MMC driver is missing, or that the MMC
> controller is not properly described in the Device Tree.
>
> Best regards,
>
> Thomas
> --
> Thomas Petazzoni, CTO, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com
>
--
Pierre FICHEUX -/- CTO OW/OWI, France -\- pierre.ficheux at openwide.fr
http://ingenierie.openwide.fr
http://www.linuxembedded.fr
I would love to change the world, but they won't give me the source code
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] Booting problem for Beaglebone
2013-12-23 16:51 ` Pierre Ficheux
@ 2013-12-23 21:47 ` Thomas Petazzoni
0 siblings, 0 replies; 10+ messages in thread
From: Thomas Petazzoni @ 2013-12-23 21:47 UTC (permalink / raw)
To: buildroot
Pierre,
On Mon, 23 Dec 2013 17:51:15 +0100 (CET), Pierre Ficheux wrote:
> I guess :) but my question was "is there any work in progress to fix it ?" before trying by myself !
Well, the problem you're reporting is a kernel problem, so it's not
really up to Buildroot developers to fix it. You should rather ask
either the mainline kernel developers (if you use a mainline kernel) or
the provider of your kernel.
Best regards,
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2013-12-23 21:47 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-09 9:17 [Buildroot] Booting problem for Beaglebone AUBERT alain
2013-10-09 9:37 ` Stephan Hoffmann
2013-10-09 11:55 ` Thomas Petazzoni
2013-10-09 15:15 ` AUBERT alain
2013-10-09 15:36 ` Thomas Petazzoni
2013-10-10 7:41 ` AUBERT alain
2013-12-23 15:08 ` Pierre Ficheux
2013-12-23 16:45 ` Thomas Petazzoni
2013-12-23 16:51 ` Pierre Ficheux
2013-12-23 21:47 ` Thomas Petazzoni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox