Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [Buildroot] [PATCH v2 1/7] xlib_libpthread-stubs: Rename package to libpthread-stubs
       [not found] <1391537725-15894-1-git-send-email-berndkuhls@hotmail.com>
@ 2014-02-04 18:15 ` Bernd Kuhls
  2014-02-05  6:50   ` Arnout Vandecappelle
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 2/7] libdrm: Remove dependency towards X11 Bernd Kuhls
                   ` (5 subsequent siblings)
  6 siblings, 1 reply; 21+ messages in thread
From: Bernd Kuhls @ 2014-02-04 18:15 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
---
v4: rebased v3
v3: rebased v2
    libdrm: rename to libpthread-stubs as well for bisectability
v2: http://patchwork.ozlabs.org/patch/304117/ (Paul Cercueil)
v1: http://patchwork.ozlabs.org/patch/278296/ (Spenser Gilliland)

 Config.in.legacy                                   |   15 ++++++++++++---
 package/Config.in                                  |    1 +
 package/libdrm/Config.in                           |    2 +-
 package/libdrm/libdrm.mk                           |    2 +-
 .../Config.in                                      |    2 +-
 package/libpthread-stubs/libpthread-stubs.mk       |   20 ++++++++++++++++++++
 package/x11r7/Config.in                            |    1 -
 package/x11r7/libxcb/Config.in                     |    2 +-
 package/x11r7/libxcb/libxcb.mk                     |    2 +-
 .../xlib_libpthread-stubs/xlib_libpthread-stubs.mk |   20 --------------------
 10 files changed, 38 insertions(+), 29 deletions(-)
 rename package/{x11r7/xlib_libpthread-stubs => libpthread-stubs}/Config.in (88%)
 create mode 100644 package/libpthread-stubs/libpthread-stubs.mk
 delete mode 100644 package/x11r7/xlib_libpthread-stubs/xlib_libpthread-stubs.mk

diff --git a/Config.in.legacy b/Config.in.legacy
index 8918184..87c0b5f 100644
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -464,11 +464,20 @@ config BR2_PACKAGE_XSERVER_tinyx
 config BR2_PACKAGE_PTHREAD_STUBS
 	bool "pthread-stubs option has been renamed"
 	select BR2_LEGACY
-	select BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS
-	depends on BR2_PACKAGE_XORG7
+	select BR2_PACKAGE_LIBPTHREAD_STUBS
 	help
 	  For consistency reason, the pthread-stubs package has been
-	  renamed to xlib_libpthread-stubs.
+	  renamed to libpthread-stubs.
+
+config BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS
+	bool "xlib-libpthread-stubs option has been renamed"
+	depends on BR2_PACKAGE_XORG7
+	select BR2_LEGACY
+	select BR2_PACKAGE_LIBPTHREAD_STUBS
+	help
+	  The pthread stubs do not depend on X11 nor Xlib. Thus the
+	  package has been renamed
+	  BR2_PACKAGE_LIBPTHREAD_STUBS
 
 ###############################################################################
 comment "Legacy options removed in 2012.08"
diff --git a/package/Config.in b/package/Config.in
index ee2a68e..f4903ba 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -744,6 +744,7 @@ source "package/liblog4c-localtime/Config.in"
 source "package/libnspr/Config.in"
 source "package/libpfm4/Config.in"
 source "package/libplist/Config.in"
+source "package/libpthread-stubs/Config.in"
 source "package/libpthsem/Config.in"
 source "package/libseccomp/Config.in"
 source "package/libsigc/Config.in"
diff --git a/package/libdrm/Config.in b/package/libdrm/Config.in
index 205f47c..4d7646b 100644
--- a/package/libdrm/Config.in
+++ b/package/libdrm/Config.in
@@ -1,6 +1,6 @@
 config BR2_PACKAGE_LIBDRM
 	bool "libdrm"
-	select BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS
+	select BR2_PACKAGE_LIBPTHREAD_STUBS
 	depends on BR2_PACKAGE_XORG7
 	depends on BR2_LARGEFILE
 	help
diff --git a/package/libdrm/libdrm.mk b/package/libdrm/libdrm.mk
index f5efaf1..dd08af1 100644
--- a/package/libdrm/libdrm.mk
+++ b/package/libdrm/libdrm.mk
@@ -12,7 +12,7 @@ LIBDRM_LICENSE = MIT
 LIBDRM_INSTALL_STAGING = YES
 
 LIBDRM_DEPENDENCIES = \
-	xlib_libpthread-stubs \
+	libpthread-stubs \
 	host-pkgconf
 
 LIBDRM_CONF_OPT = \
diff --git a/package/x11r7/xlib_libpthread-stubs/Config.in b/package/libpthread-stubs/Config.in
similarity index 88%
rename from package/x11r7/xlib_libpthread-stubs/Config.in
rename to package/libpthread-stubs/Config.in
index 6ce1b94..a4ce1cb 100644
--- a/package/x11r7/xlib_libpthread-stubs/Config.in
+++ b/package/libpthread-stubs/Config.in
@@ -1,4 +1,4 @@
-config BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS
+config BR2_PACKAGE_LIBPTHREAD_STUBS
 	bool "libpthread-stubs"
 	depends on BR2_TOOLCHAIN_HAS_THREADS
 	help
diff --git a/package/libpthread-stubs/libpthread-stubs.mk b/package/libpthread-stubs/libpthread-stubs.mk
new file mode 100644
index 0000000..b72e5a6
--- /dev/null
+++ b/package/libpthread-stubs/libpthread-stubs.mk
@@ -0,0 +1,20 @@
+################################################################################
+#
+# libpthread-stubs
+#
+################################################################################
+
+LIBPTHREAD_STUBS_VERSION = 0.3
+LIBPTHREAD_STUBS_SOURCE = libpthread-stubs-$(LIBPTHREAD_STUBS_VERSION).tar.bz2
+LIBPTHREAD_STUBS_SITE = http://xcb.freedesktop.org/dist/
+LIBPTHREAD_STUBS_LICENSE = MIT
+LIBPTHREAD_STUBS_LICENSE_FILES = COPYING
+
+LIBPTHREAD_STUBS_INSTALL_STAGING = YES
+
+ifeq ($(BR2_PREFER_STATIC_LIB),y)
+LIBPTHREAD_STUBS_CONF_ENV += LDFLAGS="$(TARGET_LDFLAGS) -pthread"
+endif
+
+$(eval $(autotools-package))
+$(eval $(host-autotools-package))
diff --git a/package/x11r7/Config.in b/package/x11r7/Config.in
index 5eff2df..5ef118b 100644
--- a/package/x11r7/Config.in
+++ b/package/x11r7/Config.in
@@ -53,7 +53,6 @@ if BR2_PACKAGE_XORG7
 		source package/x11r7/xlib_libxkbfile/Config.in
 		source package/x11r7/xlib_xtrans/Config.in
 		source package/x11r7/xlib_libpciaccess/Config.in
-		source package/x11r7/xlib_libpthread-stubs/Config.in
 	endmenu
 	menu "X11R7 Applications"
 		source package/x11r7/xapp_appres/Config.in
diff --git a/package/x11r7/libxcb/Config.in b/package/x11r7/libxcb/Config.in
index 1e1afb4..32569f7 100644
--- a/package/x11r7/libxcb/Config.in
+++ b/package/x11r7/libxcb/Config.in
@@ -1,6 +1,6 @@
 config BR2_PACKAGE_LIBXCB
 	bool "libxcb"
-	select BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS
+	select BR2_PACKAGE_LIBPTHREAD_STUBS
 	select BR2_PACKAGE_XCB_PROTO
 	select BR2_PACKAGE_XLIB_LIBXDMCP
 	select BR2_PACKAGE_XLIB_LIBXAU
diff --git a/package/x11r7/libxcb/libxcb.mk b/package/x11r7/libxcb/libxcb.mk
index fa8ed6d..9cd8bf9 100644
--- a/package/x11r7/libxcb/libxcb.mk
+++ b/package/x11r7/libxcb/libxcb.mk
@@ -13,7 +13,7 @@ LIBXCB_LICENSE_FILES = COPYING
 LIBXCB_INSTALL_STAGING = YES
 
 LIBXCB_DEPENDENCIES = \
-	host-libxslt xlib_libpthread-stubs xcb-proto xlib_libXdmcp xlib_libXau \
+	host-libxslt libpthread-stubs xcb-proto xlib_libXdmcp xlib_libXau \
 	host-xcb-proto host-python host-pkgconf
 
 LIBXCB_CONF_OPT = --disable-build-docs
diff --git a/package/x11r7/xlib_libpthread-stubs/xlib_libpthread-stubs.mk b/package/x11r7/xlib_libpthread-stubs/xlib_libpthread-stubs.mk
deleted file mode 100644
index 6343691..0000000
--- a/package/x11r7/xlib_libpthread-stubs/xlib_libpthread-stubs.mk
+++ /dev/null
@@ -1,20 +0,0 @@
-################################################################################
-#
-# xlib_libpthread-stubs
-#
-################################################################################
-
-XLIB_LIBPTHREAD_STUBS_VERSION = 0.3
-XLIB_LIBPTHREAD_STUBS_SOURCE = libpthread-stubs-$(XLIB_LIBPTHREAD_STUBS_VERSION).tar.bz2
-XLIB_LIBPTHREAD_STUBS_SITE = http://xcb.freedesktop.org/dist/
-XLIB_LIBPTHREAD_STUBS_LICENSE = MIT
-XLIB_LIBPTHREAD_STUBS_LICENSE_FILES = COPYING
-
-XLIB_LIBPTHREAD_STUBS_INSTALL_STAGING = YES
-
-ifeq ($(BR2_PREFER_STATIC_LIB),y)
-XLIB_LIBPTHREAD_STUBS_CONF_ENV += LDFLAGS="$(TARGET_LDFLAGS) -pthread"
-endif
-
-$(eval $(autotools-package))
-$(eval $(host-autotools-package))
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 21+ messages in thread
* [Buildroot] [PATCH v2 2/7] libdrm: Remove dependency towards X11
       [not found] <1391537725-15894-1-git-send-email-berndkuhls@hotmail.com>
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 1/7] xlib_libpthread-stubs: Rename package to libpthread-stubs Bernd Kuhls
@ 2014-02-04 18:15 ` Bernd Kuhls
  2014-02-05  6:56   ` Arnout Vandecappelle
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 3/7] libdrm: bump to version 2.4.52 Bernd Kuhls
                   ` (4 subsequent siblings)
  6 siblings, 1 reply; 21+ messages in thread
From: Bernd Kuhls @ 2014-02-04 18:15 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
---
v4: rebased v3
v3: rebased v2
v2: http://patchwork.ozlabs.org/patch/304116/ (Paul Cercueil)
v1: http://patchwork.ozlabs.org/patch/278297/ (Spenser Gilliland)

 package/libdrm/Config.in |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/package/libdrm/Config.in b/package/libdrm/Config.in
index 4d7646b..e382a3a 100644
--- a/package/libdrm/Config.in
+++ b/package/libdrm/Config.in
@@ -1,7 +1,6 @@
 config BR2_PACKAGE_LIBDRM
 	bool "libdrm"
 	select BR2_PACKAGE_LIBPTHREAD_STUBS
-	depends on BR2_PACKAGE_XORG7
 	depends on BR2_LARGEFILE
 	help
 	  Direct Rendering Manager
@@ -14,6 +13,7 @@ menu "DRM Drivers"
 
 config BR2_PACKAGE_LIBDRM_INTEL
 	bool "intel"
+	depends on BR2_PACKAGE_XORG7
 	select BR2_PACKAGE_LIBATOMIC_OPS
 	select BR2_PACKAGE_XLIB_LIBPCIACCESS
 	depends on BR2_i386 || BR2_x86_64
@@ -22,6 +22,7 @@ config BR2_PACKAGE_LIBDRM_INTEL
 
 config BR2_PACKAGE_LIBDRM_RADEON
 	bool "radeon"
+	depends on BR2_PACKAGE_XORG7
 	select BR2_PACKAGE_LIBATOMIC_OPS
 	select BR2_PACKAGE_XLIB_LIBPCIACCESS
 	depends on BR2_i386 || BR2_x86_64
@@ -30,6 +31,7 @@ config BR2_PACKAGE_LIBDRM_RADEON
 
 config BR2_PACKAGE_LIBDRM_NOUVEAU
 	bool "nouveau"
+	depends on BR2_PACKAGE_XORG7
 	select BR2_PACKAGE_XLIB_LIBPCIACCESS
 	depends on BR2_i386 || BR2_x86_64
 	help
@@ -37,6 +39,7 @@ config BR2_PACKAGE_LIBDRM_NOUVEAU
 
 config BR2_PACKAGE_LIBDRM_VMWGFX
 	bool "vmwgfx"
+	depends on BR2_PACKAGE_XORG7
 	select BR2_PACKAGE_XLIB_LIBPCIACCESS
 	depends on BR2_i386 || BR2_x86_64
 	help
@@ -65,5 +68,4 @@ endmenu
 endif
 
 comment "libdrm needs a toolchain w/ largefile"
-	depends on BR2_PACKAGE_XORG7
 	depends on !BR2_LARGEFILE
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 21+ messages in thread
* [Buildroot] [PATCH v2 3/7] libdrm: bump to version 2.4.52
       [not found] <1391537725-15894-1-git-send-email-berndkuhls@hotmail.com>
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 1/7] xlib_libpthread-stubs: Rename package to libpthread-stubs Bernd Kuhls
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 2/7] libdrm: Remove dependency towards X11 Bernd Kuhls
@ 2014-02-04 18:15 ` Bernd Kuhls
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 4/7] mesa3d: pull out from x11 Bernd Kuhls
                   ` (3 subsequent siblings)
  6 siblings, 0 replies; 21+ messages in thread
From: Bernd Kuhls @ 2014-02-04 18:15 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
---
v2: bump to version 2.4.52

 package/libdrm/libdrm.mk |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/package/libdrm/libdrm.mk b/package/libdrm/libdrm.mk
index dd08af1..54d5bcd 100644
--- a/package/libdrm/libdrm.mk
+++ b/package/libdrm/libdrm.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBDRM_VERSION = 2.4.46
+LIBDRM_VERSION = 2.4.52
 LIBDRM_SOURCE = libdrm-$(LIBDRM_VERSION).tar.bz2
 LIBDRM_SITE = http://dri.freedesktop.org/libdrm/
 LIBDRM_LICENSE = MIT
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 21+ messages in thread
* [Buildroot] [PATCH v2 4/7] mesa3d: pull out from x11
       [not found] <1391537725-15894-1-git-send-email-berndkuhls@hotmail.com>
                   ` (2 preceding siblings ...)
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 3/7] libdrm: bump to version 2.4.52 Bernd Kuhls
@ 2014-02-04 18:15 ` Bernd Kuhls
  2014-02-05  6:59   ` Arnout Vandecappelle
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 5/7] mesa3d: modularize and bump to version 10.0.3 Bernd Kuhls
                   ` (2 subsequent siblings)
  6 siblings, 1 reply; 21+ messages in thread
From: Bernd Kuhls @ 2014-02-04 18:15 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
---
v2: rebased v1
v1: rebased Spenser Gilliland?s patch:
    http://patchwork.ozlabs.org/patch/278302/

 package/Config.in                                  |    1 +
 package/{x11r7 => }/mesa3d/Config.in               |    0
 .../{x11r7 => }/mesa3d/mesa3d-uclibc-locale.patch  |    0
 package/{x11r7 => }/mesa3d/mesa3d.mk               |    0
 package/x11r7/Config.in                            |    1 -
 5 files changed, 1 insertion(+), 1 deletion(-)
 rename package/{x11r7 => }/mesa3d/Config.in (100%)
 rename package/{x11r7 => }/mesa3d/mesa3d-uclibc-locale.patch (100%)
 rename package/{x11r7 => }/mesa3d/mesa3d.mk (100%)

diff --git a/package/Config.in b/package/Config.in
index f4903ba..3baf5eb 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -314,6 +314,7 @@ source "package/lvm2/Config.in"
 source "package/mdadm/Config.in"
 source "package/media-ctl/Config.in"
 source "package/memtester/Config.in"
+source "package/mesa3d/Config.in"
 source "package/minicom/Config.in"
 source "package/nanocom/Config.in"
 source "package/neard/Config.in"
diff --git a/package/x11r7/mesa3d/Config.in b/package/mesa3d/Config.in
similarity index 100%
rename from package/x11r7/mesa3d/Config.in
rename to package/mesa3d/Config.in
diff --git a/package/x11r7/mesa3d/mesa3d-uclibc-locale.patch b/package/mesa3d/mesa3d-uclibc-locale.patch
similarity index 100%
rename from package/x11r7/mesa3d/mesa3d-uclibc-locale.patch
rename to package/mesa3d/mesa3d-uclibc-locale.patch
diff --git a/package/x11r7/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk
similarity index 100%
rename from package/x11r7/mesa3d/mesa3d.mk
rename to package/mesa3d/mesa3d.mk
diff --git a/package/x11r7/Config.in b/package/x11r7/Config.in
index 5ef118b..458d09f 100644
--- a/package/x11r7/Config.in
+++ b/package/x11r7/Config.in
@@ -15,7 +15,6 @@ if BR2_PACKAGE_XORG7
 	endmenu
 	menu "X11R7 Libraries"
 		source package/x11r7/libxcb/Config.in
-		source package/x11r7/mesa3d/Config.in
 		source package/x11r7/xcb-util/Config.in
 		source package/x11r7/xcb-util-image/Config.in
 		source package/x11r7/xcb-util-keysyms/Config.in
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 21+ messages in thread
* [Buildroot] [PATCH v2 5/7] mesa3d: modularize and bump to version 10.0.3
       [not found] <1391537725-15894-1-git-send-email-berndkuhls@hotmail.com>
                   ` (3 preceding siblings ...)
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 4/7] mesa3d: pull out from x11 Bernd Kuhls
@ 2014-02-04 18:15 ` Bernd Kuhls
  2014-02-05  7:24   ` Arnout Vandecappelle
  2014-03-06 17:33   ` [Buildroot] [v2, " Sebastien Bourdelin
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 6/7] xorg: Bump xserver_xorg-server version to 1.15.0 Bernd Kuhls
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 7/7] xdriver_xf86-video-intel: Bump version to 2.99.909 Bernd Kuhls
  6 siblings, 2 replies; 21+ messages in thread
From: Bernd Kuhls @ 2014-02-04 18:15 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
---
v2: bump to version 10.0.3
v1: - rebased Spenser Gilliland?s patch, which originally bumped
      version to 9.1.6 and removed mesa3d-uclibc-locale.patch:
      http://patchwork.ozlabs.org/patch/278303/
    - removed MESA3D_AUTORECONF=yes, not needed anymore
    - fixed bug in variable naming
      BR2_PACKAGE_MESA3D_DRI_DRIVERS_* -> BR2_PACKAGE_MESA3D_DRI_DRIVER_*
      preventing DRI drivers from being built
    - bump version to 10.0.2

 package/mesa3d/Config.in                           |  180 +++++++++++++++++++-
 package/mesa3d/mesa3d-uclibc-locale.patch          |   56 ------
 package/mesa3d/mesa3d.mk                           |  120 ++++++++++---
 package/opengl/Config.in                           |    1 +
 package/opengl/libegl/libegl.mk                    |    4 +
 package/opengl/libgl/Config.in                     |    6 +
 package/opengl/libgl/libgl.mk                      |   21 +++
 package/opengl/libgles/libgles.mk                  |    4 +
 package/opengl/libopenvg/libopenvg.mk              |    4 +
 .../xserver_xorg-server/xserver_xorg-server.mk     |    4 +-
 10 files changed, 317 insertions(+), 83 deletions(-)
 delete mode 100644 package/mesa3d/mesa3d-uclibc-locale.patch
 create mode 100644 package/opengl/libgl/Config.in
 create mode 100644 package/opengl/libgl/libgl.mk

diff --git a/package/mesa3d/Config.in b/package/mesa3d/Config.in
index 0ce168e..b797dfb 100644
--- a/package/mesa3d/Config.in
+++ b/package/mesa3d/Config.in
@@ -1,14 +1,182 @@
 config BR2_PACKAGE_MESA3D
 	bool "Mesa 3D Graphics Library"
-	select BR2_PACKAGE_XPROTO_GLPROTO
-	select BR2_PACKAGE_XLIB_LIBXXF86VM
-	select BR2_PACKAGE_XLIB_LIBXDAMAGE
-	select BR2_PACKAGE_XLIB_LIBXFIXES
-	select BR2_PACKAGE_XPROTO_DRI2PROTO
 	select BR2_PACKAGE_LIBDRM
 	select BR2_PACKAGE_EXPAT
 	select BR2_PACKAGE_HOST_LIBXML2_PYTHON
-	depends on BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR
+	select BR2_PACKAGE_XPROTO_DRI2_PROTO if BR2_PACKAGE_XSERVER_XORG_SERVER
+	select BR2_PACKAGE_XPROTO_XF86DRIPROTO if BR2_PACKAGE_XSERVER_XORG_SERVER
+	select BR2_PACKAGE_XLIB_LIBX11 if BR2_PACKAGE_XSERVER_XORG_SERVER
+	select BR2_PACKAGE_XLIB_LIBXEXT if BR2_PACKAGE_XSERVER_XORG_SERVER
+	select BR2_PACKAGE_XLIB_LIBXDAMAGE if BR2_PACKAGE_XSERVER_XORG_SERVER
+	select BR2_PACKAGE_XLIB_LIBXFIXES if BR2_PACKAGE_XSERVER_XORG_SERVER
+	select BR2_PACKAGE_LIBXCB if BR2_PACKAGE_XSERVER_XORG_SERVER
 	depends on BR2_INSTALL_LIBSTDCPP
+	depends on BR2_LARGEFILE
 	help
 	  Mesa 3D, an open-source implementation of the OpenGL specification.
+
+	  http://mesa3d.org
+
+if BR2_PACKAGE_MESA3D
+
+menu "libraries"
+
+config BR2_PACKAGE_MESA3D_GBM
+	depends on BR2_PACKAGE_UDEV
+	bool "gbm support"
+	help
+	  Add support for Graphics Buffer Manager.
+
+config BR2_PACKAGE_MESA3D_XVMC
+	bool "xvmc support"
+	help
+	  Add support for X Video Motion Compensation.
+
+config BR2_PACKAGE_MESA3D_VDPAU
+	bool "vdpau support"
+	help
+	  Add support for Video Decode and Presentation API for Unix.
+
+endmenu
+
+menu "Drivers"
+
+config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_I915
+	bool "Gallium i915 driver"
+	depends on BR2_i386 || BR2_x86_64
+	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
+	select BR2_PACKAGE_LIBDRM_INTEL
+	help
+	  Supports intel chips with Gallium. In most cases, the DRI i965 driver
+	  should be used as it is better maintained by Intel.
+
+config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_NOUVEAU
+	bool "Gallium nouveau driver"
+	depends on BR2_i386 || BR2_x86_64
+	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
+	select BR2_PACKAGE_LIBDRM_NOUVEAU
+	help
+	  Supports all Nvidia GPUs.
+
+config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R300
+	bool "Gallium r300 driver"
+	depends on BR2_i386 || BR2_x86_64
+	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
+	select BR2_PACKAGE_LIBDRM_RADEON
+	help
+	  Supports the R300, R400, and R500 series of ATI/AMD GPUs.
+
+config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R600
+	bool "Gallium r600 driver"
+	depends on BR2_i386 || BR2_x86_64
+	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
+	select BR2_PACKAGE_LIBDRM_RADEON
+	help
+	  Supports the R600, R700, and R800 series of ATI/AMD GPUs.
+
+config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_RADEONSI
+	bool "Gallium radeonsi driver"
+	depends on BR2_i386 || BR2_x86_64
+	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
+	select BR2_PACKAGE_LIBDRM_RADEON
+	help
+	  Supports the Radeon HD7000/HD8000/HD9000 series of ATI/AMD GPUs.
+
+config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SVGA
+	bool "Gallium vmware svga driver"
+	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
+	select BR2_PACKAGE_LIBDRM_VMWGFX
+	help
+	  This is a virtual GPU driver for VMWare virtual machines.
+
+config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST
+	bool "Gallium swrast driver"
+	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
+	help
+	  This is a software opengl implementation using the Gallium3D
+	  infrastructure.
+
+config BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST
+	bool "DRI swrast driver"
+	select BR2_PACKAGE_MESA3D_DRI_DRIVER
+	help
+	  This is a software opengl implementation using the DRI infrastructure.
+
+config BR2_PACKAGE_MESA3D_DRI_DRIVER_I965
+	bool "DRI i965 driver"
+	depends on BR2_i386 || BR2_x86_64
+	select BR2_PACKAGE_MESA3D_DRI_DRIVER
+	select BR2_PACKAGE_LIBDRM_INTEL
+	help
+	  Supports all Intel GPUs.  This version is most supported by Intel.
+
+config BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON
+	bool "DRI radeon driver"
+	depends on BR2_i386 || BR2_x86_64
+	select BR2_PACKAGE_MESA3D_DRI_DRIVER
+	select BR2_PACKAGE_LIBDRM_RADEON
+	help
+	  Legacy Radeon driver for R100 series GPUs.
+
+endmenu
+
+# The following hidden options inform gallium or dri driver selection.
+config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
+	select BR2_PACKAGE_MESA3D_DRIVER
+	bool
+
+config BR2_PACKAGE_MESA3D_DRI_DRIVER
+	select BR2_PACKAGE_MESA3D_DRIVER
+	bool
+
+config BR2_PACKAGE_MESA3D_DRIVER
+	bool
+
+menu "API Support"
+depends on BR2_PACKAGE_MESA3D_GALLIUM_DRIVER || BR2_PACKAGE_MESA3D_DRI_DRIVER
+
+config BR2_PACKAGE_MESA3D_OPENGL
+	bool "OpenGL"
+	select BR2_PACKAGE_HAS_OPENGL
+	help
+	  Use the Khronos OpenGL API.  This is a desktop computer API and is not
+	  normally implemented by embedded systems.
+
+config BR2_PACKAGE_MESA3D_EGL
+	bool "EGL"
+	select BR2_PACKAGE_MESA3D_GBM
+	select BR2_PACKAGE_HAS_OPENGL_EGL
+	help
+	  Use the Khronos EGL APIs. EGL is a window manager for OpenGL applications
+	  similar to GLX, for X, and WGL, for Windows.
+
+ config BR2_PACKAGE_MESA3D_OPENGL_ES
+	bool "OpenGL ES"
+	select BR2_PACKAGE_HAS_OPENGL_ES
+	help
+	  Use the Khronos OpenGL ES APIs.  This is commonly used on embedded
+	  systems and represents a subset of the OpenGL API.
+
+config BR2_PACKAGE_MESA3D_OPENVG
+	bool "OpenVG"
+	depends on BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
+	select BR2_PACKAGE_HAS_OPENVG
+	select BR2_PACKAGE_MESA3D_OPENGL_EGL
+	help
+	  Use the Khronos OpenVG APIs. This is a 2D API commonly used on
+	  embedded systems.
+
+config BR2_PACKAGE_MESA3D_OPENCL
+	bool "OpenCL"
+	depends on BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
+	select BR2_PACKAGE_HAS_OPENCL
+	help
+	  Use the Khronos OpenCL APIs. This is a GPU computation language
+	  commonly used in GPGPU computing applications.
+
+endmenu
+
+endif
+
+comment "mesa3d depends on a toolchain with C++ and largefile support"
+	depends on !BR2_LARGEFILE || !BR2_INSTALL_LIBSTDCPP
diff --git a/package/mesa3d/mesa3d-uclibc-locale.patch b/package/mesa3d/mesa3d-uclibc-locale.patch
deleted file mode 100644
index 99afe8d..0000000
--- a/package/mesa3d/mesa3d-uclibc-locale.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-[PATCH] Fix compilation on uClibc without locale support
-
-Based on similar patch from OE:
-
-http://git.openembedded.org/openembedded-core/commit/meta/recipes-graphics/mesa/mesa/0001-Compile-with-uclibc.patch?id=e4039eb74b20e96d4b8837cd58cf2d13d091e1ad
-
-Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
----
- configure.ac            |    3 +++
- src/glsl/strtod.c       |    2 +-
- src/mesa/main/imports.c |    2 +-
- 3 files changed, 5 insertions(+), 2 deletions(-)
-
-diff --git a/configure.ac b/configure.ac
-index fbaa376..454dad2 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -450,6 +450,9 @@ AC_SUBST([DLOPEN_LIBS])
- dnl See if posix_memalign is available
- AC_CHECK_FUNC([posix_memalign], [DEFINES="$DEFINES -DHAVE_POSIX_MEMALIGN"])
- 
-+dnl See if newlocale is available
-+AC_CHECK_FUNCS_ONCE(newlocale)
-+
- dnl SELinux awareness.
- AC_ARG_ENABLE([selinux],
-     [AS_HELP_STRING([--enable-selinux],
-diff --git a/src/glsl/strtod.c b/src/glsl/strtod.c
-index a876e13..9fce7e9 100644
---- a/src/glsl/strtod.c
-+++ b/src/glsl/strtod.c
-@@ -44,7 +44,7 @@ double
- double
- glsl_strtod(const char *s, char **end)
- {
--#if defined(_GNU_SOURCE) && !defined(__CYGWIN__) && !defined(__FreeBSD__)
-+#if defined(_GNU_SOURCE) && !defined(__CYGWIN__) && !defined(__FreeBSD__) && defined(HAVE_NEWLOCALE)
-    static locale_t loc = NULL;
-    if (!loc) {
-       loc = newlocale(LC_CTYPE_MASK, "C", NULL);
-diff --git a/src/mesa/main/imports.c b/src/mesa/main/imports.c
-index d3727ef..363bf32 100644
---- a/src/mesa/main/imports.c
-+++ b/src/mesa/main/imports.c
-@@ -757,7 +757,7 @@ float
- float
- _mesa_strtof( const char *s, char **end )
- {
--#if defined(_GNU_SOURCE) && !defined(__CYGWIN__) && !defined(__FreeBSD__)
-+#if defined(_GNU_SOURCE) && !defined(__CYGWIN__) && !defined(__FreeBSD__) && defined(HAVE_NEWLOCALE)
-    static locale_t loc = NULL;
-    if (!loc) {
-       loc = newlocale(LC_CTYPE_MASK, "C", NULL);
--- 
-1.7.10.4
-
diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk
index d4080d4..f12a1f5 100644
--- a/package/mesa3d/mesa3d.mk
+++ b/package/mesa3d/mesa3d.mk
@@ -4,31 +4,15 @@
 #
 ################################################################################
 
-MESA3D_VERSION = 7.10.3
-MESA3D_SOURCE = MesaLib-$(MESA3D_VERSION).tar.gz
-MESA3D_SITE = ftp://ftp.freedesktop.org/pub/mesa/older-versions/7.x/$(MESA3D_VERSION)
+MESA3D_VERSION = 10.0.3
+MESA3D_SOURCE = MesaLib-$(MESA3D_VERSION).tar.bz2
+MESA3D_SITE = ftp://ftp.freedesktop.org/pub/mesa/$(MESA3D_VERSION)
 MESA3D_LICENSE = MIT, SGI, Khronos
 MESA3D_LICENSE_FILES = docs/license.html
 
-MESA3D_AUTORECONF = YES
 MESA3D_INSTALL_STAGING = YES
 
-MESA3D_CONF_OPT = \
-	--disable-egl \
-	--disable-glu \
-	--disable-glw \
-	--disable-glut \
-	--disable-gallium \
-	--with-driver=dri \
-	--with-dri-drivers=swrast \
-	--disable-static
-
 MESA3D_DEPENDENCIES = \
-	xproto_glproto \
-	xlib_libXxf86vm \
-	xlib_libXdamage \
-	xlib_libXfixes \
-	xproto_dri2proto \
 	libdrm \
 	expat \
 	host-xutil_makedepend \
@@ -37,4 +21,102 @@ MESA3D_DEPENDENCIES = \
 	host-bison \
 	host-flex
 
+MESA3D_CONF_OPT = \
+	--disable-static
+
+# Libraries
+
+ifeq ($(BR2_PACKAGE_MESA3D_GBM),y)
+MESA3D_DEPENDENCIES += udev
+MESA3D_CONF_OPT += --enable-gbm
+else
+MESA3D_CONF_OPT += --disable-gbm
+endif
+
+ifeq ($(BR2_PACKAGE_XSERVER_XORG_SERVER),y)
+MESA3D_DEPENDENCIES += \
+	xproto_xf86driproto xproto_dri2proto xproto_glproto \
+	xlib_libX11 xlib_libXext xlib_libXdamage xlib_libXfixes libxcb
+MESA3D_CONF_OPT += \
+	--enable-dri \
+	--enable-xa \
+	--enable-glx
+else
+MESA3D_CONF_OPT += \
+	--disable-dri \
+	--disable-xa \
+	--disable-glx
+endif
+
+# Drivers
+
+#Gallium Drivers
+MESA3D_GALLIUM_DRIVERS-$(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_I915)     += i915
+MESA3D_GALLIUM_DRIVERS-$(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_NOUVEAU)  += nouveau
+MESA3D_GALLIUM_DRIVERS-$(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R300)     += r300
+MESA3D_GALLIUM_DRIVERS-$(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R600)     += r600
+MESA3D_GALLIUM_DRIVERS-$(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_RADEONSI) += radeonsi
+MESA3D_GALLIUM_DRIVERS-$(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SVGA)     += svga
+MESA3D_GALLIUM_DRIVERS-$(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST)   += swrast
+# DRI Drivers
+MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST) += swrast
+MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_I965)   += i965
+MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON) += radeon
+
+ifeq ($(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER),y)
+MESA3D_CONF_OPT += \
+	--with-gallium-drivers=$(subst $(space),$(comma),$(MESA3D_GALLIUM_DRIVERS-y))
+else
+MESA3D_CONF_OPT += --without-gallium-drivers
+endif
+
+ifeq ($(BR2_PACKAGE_MESA3D_DRI_DRIVER),y)
+MESA3D_CONF_OPT += \
+	--with-dri-drivers=$(subst $(space),$(comma),$(MESA3D_DRI_DRIVERS-y))
+else
+MESA3D_CONF_OPT += --without-dri-drivers
+endif
+
+# APIs
+
+ifeq ($(BR2_PACKAGE_MESA3D_EGL),y)
+MESA3D_EGL_PLATFORMS = drm
+ifeq ($(BR2_PACKAGE_WAYLAND),y)
+MESA3D_DEPENDENCIES += wayland
+MESA3D_EGL_PLATFORMS += wayland
+endif
+ifeq ($(BR2_PACKAGE_XSERVER_XORG_SERVER),y)
+MESA3D_EGL_PLATFORMS += x11
+endif
+MESA3D_CONF_OPT += \
+	--enable-egl \
+	--with-egl-platforms=$(foreach subst $(space),$(comma),$(MESA3D_EGL_PLATFORMS))
+else
+MESA3D_CONF_OPT += --disable-egl
+endif
+
+ifeq ($(BR2_PACKAGE_MESA3D_OPENGL),y)
+MESA3D_CONF_OPT += --enable-opengl
+else
+MESA3D_CONF_OPT += --disable-opengl
+endif
+
+ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_ES),y)
+MESA3D_CONF_OPT += --enable-gles1 --enable-gles2
+else
+MESA3D_CONF_OPT += --disable-gles1 --disable-gles2
+endif
+
+ifeq ($(BR2_PACKAGE_MESA3D_OPENVG),y)
+MESA3D_CONF_OPT += --enable-openvg --enable-gallium-egl
+else
+MESA3D_CONF_OPT += --disable-openvg --disable-gallium-egl
+endif
+
+ifeq ($(BR2_PACKAGE_MESA3D_OPENCL),y)
+MESA3D_CONF_OPT += --enable-opencl
+else
+MESA3D_CONF_OPT += --disable-opencl
+endif
+
 $(eval $(autotools-package))
diff --git a/package/opengl/Config.in b/package/opengl/Config.in
index ed81835..02010a9 100644
--- a/package/opengl/Config.in
+++ b/package/opengl/Config.in
@@ -1,4 +1,5 @@
 source "package/opengl/libegl/Config.in"
+source "package/opengl/libgl/Config.in"
 source "package/opengl/libgles/Config.in"
 source "package/opengl/libopenvg/Config.in"
 source "package/opengl/libopenmax/Config.in"
diff --git a/package/opengl/libegl/libegl.mk b/package/opengl/libegl/libegl.mk
index b2b74f1..8d8e6a4 100644
--- a/package/opengl/libegl/libegl.mk
+++ b/package/opengl/libegl/libegl.mk
@@ -7,6 +7,10 @@
 LIBEGL_SOURCE =
 LIBEGL_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENGL_EGL))
 
+ifeq ($(BR2_PACKAGE_MESA3D_EGL),y)
+LIBEGL_DEPENDENCIES += mesa3d
+endif
+
 ifeq ($(LIBEGL_DEPENDENCIES),)
 define LIBEGL_CONFIGURE_CMDS
 	echo "No libEGL implementation selected. Configuration error."
diff --git a/package/opengl/libgl/Config.in b/package/opengl/libgl/Config.in
new file mode 100644
index 0000000..5421c86
--- /dev/null
+++ b/package/opengl/libgl/Config.in
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_HAS_OPENGL_GL
+	bool
+
+config BR2_PACKAGE_PROVIDES_OPENGL_GL
+	depends on BR2_PACKAGE_HAS_OPENGL_GL
+	string
diff --git a/package/opengl/libgl/libgl.mk b/package/opengl/libgl/libgl.mk
new file mode 100644
index 0000000..f95a959
--- /dev/null
+++ b/package/opengl/libgl/libgl.mk
@@ -0,0 +1,21 @@
+################################################################################
+#
+# libgl
+#
+################################################################################
+
+LIBGL_SOURCE =
+LIBGL_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENGL_GL))
+
+ifeq ($(BR2_PACKAGE_MESA_OPENGL),y)
+LIBGL_DEPENDENCIES += mesa3d
+endif
+
+ifeq ($(LIBGL_DEPENDENCIES),)
+define LIBGL_CONFIGURE_CMDS
+	echo "No libGL implementation selected. Configuration error."
+	exit 1
+endef
+endif
+
+$(eval $(generic-package))
diff --git a/package/opengl/libgles/libgles.mk b/package/opengl/libgles/libgles.mk
index 0dcbaa7..5c1e6d4 100644
--- a/package/opengl/libgles/libgles.mk
+++ b/package/opengl/libgles/libgles.mk
@@ -7,6 +7,10 @@
 LIBGLES_SOURCE =
 LIBGLES_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENGL_ES))
 
+ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_ES),y)
+LIBGLES_DEPENDENCIES += mesa3d
+endif
+
 ifeq ($(LIBGLES_DEPENDENCIES),)
 define LIBGLES_CONFIGURE_CMDS
 	echo "No libGLES implementation selected. Configuration error."
diff --git a/package/opengl/libopenvg/libopenvg.mk b/package/opengl/libopenvg/libopenvg.mk
index ffd9d68..83c600b 100644
--- a/package/opengl/libopenvg/libopenvg.mk
+++ b/package/opengl/libopenvg/libopenvg.mk
@@ -7,6 +7,10 @@
 LIBOPENVG_SOURCE =
 LIBOPENVG_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENVG))
 
+ifeq ($(BR2_PACKAGE_MESA3D_OPENVG),y)
+LIBOPENVG_DEPENDENCIES += mesa3d
+endif
+
 ifeq ($(LIBOPENVG_DEPENDENCIES),)
 define LIBOPENVG_CONFIGURE_CMDS
 	echo "No libOpenVG implementation selected. Configuration error."
diff --git a/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk b/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk
index 4089aab..f5a4db6 100644
--- a/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk
+++ b/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk
@@ -99,7 +99,7 @@ else # modular
 XSERVER_XORG_SERVER_CONF_OPT += --disable-kdrive --disable-xfbdev
 endif
 
-ifeq ($(BR2_PACKAGE_MESA3D),y)
+ifeq ($(BR2_PACKAGE_MESA3D_DRIVER),y)
 XSERVER_XORG_SERVER_DEPENDENCIES += mesa3d xproto_xf86driproto
 else
 XSERVER_XORG_SERVER_CONF_OPT += --disable-dri
@@ -172,7 +172,7 @@ ifneq ($(BR2_PACKAGE_XLIB_LIBDMX),y)
 XSERVER_XORG_SERVER_CONF_OPT += --disable-dmx
 endif
 
-ifeq ($(BR2_PACKAGE_MESA3D),y)
+ifeq ($(BR2_PACKAGE_MESA3D_DRIVER),y)
 XSERVER_XORG_SERVER_CONF_OPT += --enable-glx
 else
 XSERVER_XORG_SERVER_CONF_OPT += --disable-glx
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 21+ messages in thread
* [Buildroot] [PATCH v2 6/7] xorg: Bump xserver_xorg-server version to 1.15.0
       [not found] <1391537725-15894-1-git-send-email-berndkuhls@hotmail.com>
                   ` (4 preceding siblings ...)
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 5/7] mesa3d: modularize and bump to version 10.0.3 Bernd Kuhls
@ 2014-02-04 18:15 ` Bernd Kuhls
  2014-02-05 16:59   ` Arnout Vandecappelle
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 7/7] xdriver_xf86-video-intel: Bump version to 2.99.909 Bernd Kuhls
  6 siblings, 1 reply; 21+ messages in thread
From: Bernd Kuhls @ 2014-02-04 18:15 UTC (permalink / raw)
  To: buildroot

- remove patches applied upstream
- add new dependency xproto_presentproto

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
---
v2: rebased v1

 package/x11r7/xserver_xorg-server/Config.in        |    1 +
 .../xserver_xorg-server-02-cve-2013-1940.patch     |   34 -----------
 ...ut-allocate-enough-space-for-null-charact.patch |   59 --------------------
 .../xserver_xorg-server/xserver_xorg-server.mk     |    3 +-
 4 files changed, 3 insertions(+), 94 deletions(-)
 delete mode 100644 package/x11r7/xserver_xorg-server/xserver_xorg-server-02-cve-2013-1940.patch
 delete mode 100644 package/x11r7/xserver_xorg-server/xserver_xorg-server-03-Revert-kinput-allocate-enough-space-for-null-charact.patch

diff --git a/package/x11r7/xserver_xorg-server/Config.in b/package/x11r7/xserver_xorg-server/Config.in
index 5f0c2d8..dfa7d10 100644
--- a/package/x11r7/xserver_xorg-server/Config.in
+++ b/package/x11r7/xserver_xorg-server/Config.in
@@ -36,6 +36,7 @@ config BR2_PACKAGE_XSERVER_XORG_SERVER
 	select BR2_PACKAGE_XPROTO_GLPROTO
 	select BR2_PACKAGE_XPROTO_INPUTPROTO
 	select BR2_PACKAGE_XPROTO_KBPROTO
+	select BR2_PACKAGE_XPROTO_PRESENTPROTO
 	select BR2_PACKAGE_XPROTO_RANDRPROTO
 	select BR2_PACKAGE_XPROTO_RENDERPROTO
 	select BR2_PACKAGE_XPROTO_RESOURCEPROTO
diff --git a/package/x11r7/xserver_xorg-server/xserver_xorg-server-02-cve-2013-1940.patch b/package/x11r7/xserver_xorg-server/xserver_xorg-server-02-cve-2013-1940.patch
deleted file mode 100644
index d85494f..0000000
--- a/package/x11r7/xserver_xorg-server/xserver_xorg-server-02-cve-2013-1940.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 6ca03b9161d33b1d2b55a3a1a913cf88deb2343f Mon Sep 17 00:00:00 2001
-From: Dave Airlie <airlied@gmail.com>
-Date: Wed, 10 Apr 2013 06:09:01 +0000
-Subject: xf86: fix flush input to work with Linux evdev devices.
-
-So when we VT switch back and attempt to flush the input devices,
-we don't succeed because evdev won't return part of an event,
-since we were only asking for 4 bytes, we'd only get -EINVAL back.
-
-This could later cause events to be flushed that we shouldn't have
-gotten.
-
-This is a fix for CVE-2013-1940.
-
-Signed-off-by: Dave Airlie <airlied@redhat.com>
-Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
-Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
----
-diff --git a/hw/xfree86/os-support/shared/posix_tty.c b/hw/xfree86/os-support/shared/posix_tty.c
-index ab3757a..4d08c1e 100644
---- a/hw/xfree86/os-support/shared/posix_tty.c
-+++ b/hw/xfree86/os-support/shared/posix_tty.c
-@@ -421,7 +421,8 @@ xf86FlushInput(int fd)
- {
-     fd_set fds;
-     struct timeval timeout;
--    char c[4];
-+    /* this needs to be big enough to flush an evdev event. */
-+    char c[256];
- 
-     DebugF("FlushingSerial\n");
-     if (tcflush(fd, TCIFLUSH) == 0)
---
-cgit v0.9.0.2-2-gbebe
diff --git a/package/x11r7/xserver_xorg-server/xserver_xorg-server-03-Revert-kinput-allocate-enough-space-for-null-charact.patch b/package/x11r7/xserver_xorg-server/xserver_xorg-server-03-Revert-kinput-allocate-enough-space-for-null-charact.patch
deleted file mode 100644
index d19bc46..0000000
--- a/package/x11r7/xserver_xorg-server/xserver_xorg-server-03-Revert-kinput-allocate-enough-space-for-null-charact.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 09f1e5b15b769e1122f0a8d7cae0820038992312 Mon Sep 17 00:00:00 2001
-From: Julien Cristau <jcristau@debian.org>
-Date: Sun, 7 Oct 2012 18:40:35 +0200
-Subject: [PATCH] Revert "kinput: allocate enough space for null character."
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reverts commit 531785dd746d64ef7f473a83ca73bb20e74b6fca.
-
-The above commit breaks Xephyr option parsing.  Andrzej writes:
-
-  Xephyr -retro -keybd evdev,,device=/dev/input/event2,xkbrules=evdev,xkbmodel=evdev,xkblayout=pl -mouse evdev,,device=/dev/input/event1 :3
-
-  results in:
-
-  <snip>
-  Pointer option key (device=) of value (/dev/input/event1) not assigned!
-  Kbd option key (device=) of value (/dev/input/event2) not assigned!
-  Kbd option key (xkbrules=) of value (evdev) not assigned!
-  Kbd option key (xkbmodel=) of value (evdev) not assigned!
-  Kbd option key (xkblayout=) of value (pl) not assigned!
-  <snip>
-
-  The effect of the patch is that the "key=value" pairs are parsed in such
-  a way that the key is added an "equals" sign to it and we end up with
-  keys like "device=" instead of "device". This in turn has effect on
-  KdParsePointerOptions and KdParseKbdOptions: the key does not match
-  any choice presented in the "switch" statement, and so "Pointer/Kbd
-  option key (...) of value (...) not assigned!" happens, making all
-  "key=value" options inaccessible to the user. Reverting the patch makes
-  them available again.
-
-Reference: http://bugs.debian.org/689246
-Reported-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
-Signed-off-by: Julien Cristau <jcristau@debian.org>
-Cc: Dave Airlie <airlied@redhat.com>
-Reviewed-by: S?ren Sandmann <ssp@redhat.com>
-Signed-off-by: Keith Packard <keithp@keithp.com>
----
- hw/kdrive/src/kinput.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/hw/kdrive/src/kinput.c b/hw/kdrive/src/kinput.c
-index d35dcf8..b1068bb 100644
---- a/hw/kdrive/src/kinput.c
-+++ b/hw/kdrive/src/kinput.c
-@@ -1034,7 +1034,7 @@ KdGetOptions(InputOption **options, char *string)
- 
-     if (strchr(string, '=')) {
-         tam_key = (strchr(string, '=') - string);
--        key = strndup(string, tam_key + 1);
-+        key = strndup(string, tam_key);
-         if (!key)
-             goto out;
- 
--- 
-1.7.10.4
-
diff --git a/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk b/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk
index f5a4db6..57150dc 100644
--- a/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk
+++ b/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-XSERVER_XORG_SERVER_VERSION = 1.12.4
+XSERVER_XORG_SERVER_VERSION = 1.15.0
 XSERVER_XORG_SERVER_SOURCE = xorg-server-$(XSERVER_XORG_SERVER_VERSION).tar.bz2
 XSERVER_XORG_SERVER_SITE = http://xorg.freedesktop.org/releases/individual/xserver
 XSERVER_XORG_SERVER_LICENSE = MIT
@@ -40,6 +40,7 @@ XSERVER_XORG_SERVER_DEPENDENCIES = 	\
 	xproto_glproto 			\
 	xproto_inputproto 		\
 	xproto_kbproto 			\
+	xproto_presentproto 		\
 	xproto_randrproto 		\
 	xproto_renderproto 		\
 	xproto_resourceproto 		\
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 21+ messages in thread
* [Buildroot] [PATCH v2 7/7] xdriver_xf86-video-intel: Bump version to 2.99.909
       [not found] <1391537725-15894-1-git-send-email-berndkuhls@hotmail.com>
                   ` (5 preceding siblings ...)
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 6/7] xorg: Bump xserver_xorg-server version to 1.15.0 Bernd Kuhls
@ 2014-02-04 18:15 ` Bernd Kuhls
  6 siblings, 0 replies; 21+ messages in thread
From: Bernd Kuhls @ 2014-02-04 18:15 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
---
 .../xdriver_xf86-video-intel.mk                    |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/package/x11r7/xdriver_xf86-video-intel/xdriver_xf86-video-intel.mk b/package/x11r7/xdriver_xf86-video-intel/xdriver_xf86-video-intel.mk
index 332de54..02d92bf 100644
--- a/package/x11r7/xdriver_xf86-video-intel/xdriver_xf86-video-intel.mk
+++ b/package/x11r7/xdriver_xf86-video-intel/xdriver_xf86-video-intel.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-XDRIVER_XF86_VIDEO_INTEL_VERSION = 2.99.907
+XDRIVER_XF86_VIDEO_INTEL_VERSION = 2.99.909
 XDRIVER_XF86_VIDEO_INTEL_SOURCE = xf86-video-intel-$(XDRIVER_XF86_VIDEO_INTEL_VERSION).tar.bz2
 XDRIVER_XF86_VIDEO_INTEL_SITE = http://xorg.freedesktop.org/releases/individual/driver
 XDRIVER_XF86_VIDEO_INTEL_LICENSE = MIT
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 21+ messages in thread
* [Buildroot] [PATCH v2 1/7] xlib_libpthread-stubs: Rename package to libpthread-stubs
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 1/7] xlib_libpthread-stubs: Rename package to libpthread-stubs Bernd Kuhls
@ 2014-02-05  6:50   ` Arnout Vandecappelle
  0 siblings, 0 replies; 21+ messages in thread
From: Arnout Vandecappelle @ 2014-02-05  6:50 UTC (permalink / raw)
  To: buildroot

 Hi Bernd,

 Sorry I didn't review this earlier - but keep up the good work!

On 04/02/14 19:15, Bernd Kuhls wrote:
> Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
> ---
> v4: rebased v3
> v3: rebased v2
>     libdrm: rename to libpthread-stubs as well for bisectability
> v2: http://patchwork.ozlabs.org/patch/304117/ (Paul Cercueil)
> v1: http://patchwork.ozlabs.org/patch/278296/ (Spenser Gilliland)
> 
>  Config.in.legacy                                   |   15 ++++++++++++---
>  package/Config.in                                  |    1 +
>  package/libdrm/Config.in                           |    2 +-
>  package/libdrm/libdrm.mk                           |    2 +-
>  .../Config.in                                      |    2 +-
>  package/libpthread-stubs/libpthread-stubs.mk       |   20 ++++++++++++++++++++
>  package/x11r7/Config.in                            |    1 -
>  package/x11r7/libxcb/Config.in                     |    2 +-
>  package/x11r7/libxcb/libxcb.mk                     |    2 +-
>  .../xlib_libpthread-stubs/xlib_libpthread-stubs.mk |   20 --------------------
>  10 files changed, 38 insertions(+), 29 deletions(-)
>  rename package/{x11r7/xlib_libpthread-stubs => libpthread-stubs}/Config.in (88%)
>  create mode 100644 package/libpthread-stubs/libpthread-stubs.mk
>  delete mode 100644 package/x11r7/xlib_libpthread-stubs/xlib_libpthread-stubs.mk
> 
> diff --git a/Config.in.legacy b/Config.in.legacy
> index 8918184..87c0b5f 100644
> --- a/Config.in.legacy
> +++ b/Config.in.legacy
> @@ -464,11 +464,20 @@ config BR2_PACKAGE_XSERVER_tinyx
>  config BR2_PACKAGE_PTHREAD_STUBS
>  	bool "pthread-stubs option has been renamed"
>  	select BR2_LEGACY
> -	select BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS
> -	depends on BR2_PACKAGE_XORG7
> +	select BR2_PACKAGE_LIBPTHREAD_STUBS
>  	help
>  	  For consistency reason, the pthread-stubs package has been
> -	  renamed to xlib_libpthread-stubs.
> +	  renamed to libpthread-stubs.

 Wow, so we rename this thing twice in just over a year... How good are
we! :-)

> +
> +config BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS

 This should go in the 2014.02 section, otherwise it may be removed again
way too early.

 Otherwise looks good to me, so perhaps Peter can fix this up while
committing.

 Regards,
 Arnout

> +	bool "xlib-libpthread-stubs option has been renamed"
> +	depends on BR2_PACKAGE_XORG7
> +	select BR2_LEGACY
> +	select BR2_PACKAGE_LIBPTHREAD_STUBS
> +	help
> +	  The pthread stubs do not depend on X11 nor Xlib. Thus the
> +	  package has been renamed
> +	  BR2_PACKAGE_LIBPTHREAD_STUBS
>  
>  ###############################################################################
>  comment "Legacy options removed in 2012.08"
[snip]


-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

^ permalink raw reply	[flat|nested] 21+ messages in thread
* [Buildroot] [PATCH v2 2/7] libdrm: Remove dependency towards X11
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 2/7] libdrm: Remove dependency towards X11 Bernd Kuhls
@ 2014-02-05  6:56   ` Arnout Vandecappelle
  2014-02-05 18:19     ` Bernd Kuhls
  2014-02-05 20:35     ` Bernd Kuhls
  0 siblings, 2 replies; 21+ messages in thread
From: Arnout Vandecappelle @ 2014-02-05  6:56 UTC (permalink / raw)
  To: buildroot

On 04/02/14 19:15, Bernd Kuhls wrote:
> Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
> ---
> v4: rebased v3
> v3: rebased v2
> v2: http://patchwork.ozlabs.org/patch/304116/ (Paul Cercueil)
> v1: http://patchwork.ozlabs.org/patch/278297/ (Spenser Gilliland)

 Oh, something I forgot to mention in the previous patch as well: you
should keep the Signed-off-by of the two previous authors, so they get
their due credit (which is required since they published their patches
under GPL).

 Otherwise looks good to me, but one more remark below.

> 
>  package/libdrm/Config.in |    6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/package/libdrm/Config.in b/package/libdrm/Config.in
> index 4d7646b..e382a3a 100644
> --- a/package/libdrm/Config.in
> +++ b/package/libdrm/Config.in
> @@ -1,7 +1,6 @@
>  config BR2_PACKAGE_LIBDRM
>  	bool "libdrm"
>  	select BR2_PACKAGE_LIBPTHREAD_STUBS
> -	depends on BR2_PACKAGE_XORG7
>  	depends on BR2_LARGEFILE
>  	help
>  	  Direct Rendering Manager
> @@ -14,6 +13,7 @@ menu "DRM Drivers"
>  
>  config BR2_PACKAGE_LIBDRM_INTEL
>  	bool "intel"
> +	depends on BR2_PACKAGE_XORG7
>  	select BR2_PACKAGE_LIBATOMIC_OPS
>  	select BR2_PACKAGE_XLIB_LIBPCIACCESS
>  	depends on BR2_i386 || BR2_x86_64
> @@ -22,6 +22,7 @@ config BR2_PACKAGE_LIBDRM_INTEL
>  
>  config BR2_PACKAGE_LIBDRM_RADEON
>  	bool "radeon"
> +	depends on BR2_PACKAGE_XORG7
>  	select BR2_PACKAGE_LIBATOMIC_OPS
>  	select BR2_PACKAGE_XLIB_LIBPCIACCESS
>  	depends on BR2_i386 || BR2_x86_64
> @@ -30,6 +31,7 @@ config BR2_PACKAGE_LIBDRM_RADEON
>  
>  config BR2_PACKAGE_LIBDRM_NOUVEAU
>  	bool "nouveau"
> +	depends on BR2_PACKAGE_XORG7
>  	select BR2_PACKAGE_XLIB_LIBPCIACCESS
>  	depends on BR2_i386 || BR2_x86_64
>  	help
> @@ -37,6 +39,7 @@ config BR2_PACKAGE_LIBDRM_NOUVEAU
>  
>  config BR2_PACKAGE_LIBDRM_VMWGFX
>  	bool "vmwgfx"
> +	depends on BR2_PACKAGE_XORG7
>  	select BR2_PACKAGE_XLIB_LIBPCIACCESS
>  	depends on BR2_i386 || BR2_x86_64
>  	help

 So only the three experimental ARM drivers work without Xorg?

 Not for this patch, but does libdrm do anything useful when no driver is
selected? Shouldn't it have a dependency on x86 || arm so that at least
one driver can be selected?

 Regards,
 Arnout

> @@ -65,5 +68,4 @@ endmenu
>  endif
>  
>  comment "libdrm needs a toolchain w/ largefile"
> -	depends on BR2_PACKAGE_XORG7
>  	depends on !BR2_LARGEFILE
> 


-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

^ permalink raw reply	[flat|nested] 21+ messages in thread
* [Buildroot] [PATCH v2 4/7] mesa3d: pull out from x11
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 4/7] mesa3d: pull out from x11 Bernd Kuhls
@ 2014-02-05  6:59   ` Arnout Vandecappelle
  0 siblings, 0 replies; 21+ messages in thread
From: Arnout Vandecappelle @ 2014-02-05  6:59 UTC (permalink / raw)
  To: buildroot

On 04/02/14 19:15, Bernd Kuhls wrote:
> Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
> ---
> v2: rebased v1
> v1: rebased Spenser Gilliland?s patch:
>     http://patchwork.ozlabs.org/patch/278302/

 Again, retain the original SoB.

> 
>  package/Config.in                                  |    1 +
>  package/{x11r7 => }/mesa3d/Config.in               |    0
>  .../{x11r7 => }/mesa3d/mesa3d-uclibc-locale.patch  |    0
>  package/{x11r7 => }/mesa3d/mesa3d.mk               |    0
>  package/x11r7/Config.in                            |    1 -
>  5 files changed, 1 insertion(+), 1 deletion(-)
>  rename package/{x11r7 => }/mesa3d/Config.in (100%)
>  rename package/{x11r7 => }/mesa3d/mesa3d-uclibc-locale.patch (100%)
>  rename package/{x11r7 => }/mesa3d/mesa3d.mk (100%)
> 
> diff --git a/package/Config.in b/package/Config.in
> index f4903ba..3baf5eb 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -314,6 +314,7 @@ source "package/lvm2/Config.in"
>  source "package/mdadm/Config.in"
>  source "package/media-ctl/Config.in"
>  source "package/memtester/Config.in"
> +source "package/mesa3d/Config.in"

 Maybe this was commented on before, but: Hardware handling? Doesn't it
fit better in either Graphic libraries or Libraries/Graphic?


 Regards,
 Arnout

>  source "package/minicom/Config.in"
>  source "package/nanocom/Config.in"
>  source "package/neard/Config.in"
> diff --git a/package/x11r7/mesa3d/Config.in b/package/mesa3d/Config.in
> similarity index 100%
> rename from package/x11r7/mesa3d/Config.in
> rename to package/mesa3d/Config.in
> diff --git a/package/x11r7/mesa3d/mesa3d-uclibc-locale.patch b/package/mesa3d/mesa3d-uclibc-locale.patch
> similarity index 100%
> rename from package/x11r7/mesa3d/mesa3d-uclibc-locale.patch
> rename to package/mesa3d/mesa3d-uclibc-locale.patch
> diff --git a/package/x11r7/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk
> similarity index 100%
> rename from package/x11r7/mesa3d/mesa3d.mk
> rename to package/mesa3d/mesa3d.mk
> diff --git a/package/x11r7/Config.in b/package/x11r7/Config.in
> index 5ef118b..458d09f 100644
> --- a/package/x11r7/Config.in
> +++ b/package/x11r7/Config.in
> @@ -15,7 +15,6 @@ if BR2_PACKAGE_XORG7
>  	endmenu
>  	menu "X11R7 Libraries"
>  		source package/x11r7/libxcb/Config.in
> -		source package/x11r7/mesa3d/Config.in
>  		source package/x11r7/xcb-util/Config.in
>  		source package/x11r7/xcb-util-image/Config.in
>  		source package/x11r7/xcb-util-keysyms/Config.in
> 


-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

^ permalink raw reply	[flat|nested] 21+ messages in thread
* [Buildroot] [PATCH v2 5/7] mesa3d: modularize and bump to version 10.0.3
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 5/7] mesa3d: modularize and bump to version 10.0.3 Bernd Kuhls
@ 2014-02-05  7:24   ` Arnout Vandecappelle
  2014-03-06 17:33   ` [Buildroot] [v2, " Sebastien Bourdelin
  1 sibling, 0 replies; 21+ messages in thread
From: Arnout Vandecappelle @ 2014-02-05  7:24 UTC (permalink / raw)
  To: buildroot

On 04/02/14 19:15, Bernd Kuhls wrote:
> Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>

 The commit message should explain why the uclibc-locale patch and
AUTORECONF can be removed. It should also explain a bit better what
"modularize" means. And also explicitly warn that mesa3d no longer
depends on X and therefore must explicitly include the largefile
dependency. And maybe I'm forgetting something.

 And of course: keep Spenser's SoB.

> ---
> v2: bump to version 10.0.3
> v1: - rebased Spenser Gilliland?s patch, which originally bumped
>       version to 9.1.6 and removed mesa3d-uclibc-locale.patch:
>       http://patchwork.ozlabs.org/patch/278303/
>     - removed MESA3D_AUTORECONF=yes, not needed anymore
>     - fixed bug in variable naming
>       BR2_PACKAGE_MESA3D_DRI_DRIVERS_* -> BR2_PACKAGE_MESA3D_DRI_DRIVER_*
>       preventing DRI drivers from being built
>     - bump version to 10.0.2
> 
>  package/mesa3d/Config.in                           |  180 +++++++++++++++++++-
>  package/mesa3d/mesa3d-uclibc-locale.patch          |   56 ------
>  package/mesa3d/mesa3d.mk                           |  120 ++++++++++---
>  package/opengl/Config.in                           |    1 +
>  package/opengl/libegl/libegl.mk                    |    4 +
>  package/opengl/libgl/Config.in                     |    6 +
>  package/opengl/libgl/libgl.mk                      |   21 +++
>  package/opengl/libgles/libgles.mk                  |    4 +
>  package/opengl/libopenvg/libopenvg.mk              |    4 +
>  .../xserver_xorg-server/xserver_xorg-server.mk     |    4 +-
>  10 files changed, 317 insertions(+), 83 deletions(-)
>  delete mode 100644 package/mesa3d/mesa3d-uclibc-locale.patch
>  create mode 100644 package/opengl/libgl/Config.in
>  create mode 100644 package/opengl/libgl/libgl.mk
> 
> diff --git a/package/mesa3d/Config.in b/package/mesa3d/Config.in
> index 0ce168e..b797dfb 100644
> --- a/package/mesa3d/Config.in
> +++ b/package/mesa3d/Config.in
> @@ -1,14 +1,182 @@
>  config BR2_PACKAGE_MESA3D
>  	bool "Mesa 3D Graphics Library"
> -	select BR2_PACKAGE_XPROTO_GLPROTO
> -	select BR2_PACKAGE_XLIB_LIBXXF86VM
> -	select BR2_PACKAGE_XLIB_LIBXDAMAGE
> -	select BR2_PACKAGE_XLIB_LIBXFIXES
> -	select BR2_PACKAGE_XPROTO_DRI2PROTO
>  	select BR2_PACKAGE_LIBDRM
>  	select BR2_PACKAGE_EXPAT
>  	select BR2_PACKAGE_HOST_LIBXML2_PYTHON
> -	depends on BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR

 This removes the following implicit dependencies (from XORG7):

        depends on BR2_USE_WCHAR
        depends on BR2_TOOLCHAIN_HAS_THREADS
        depends on !BR2_PREFER_STATIC_LIB # dlopen in xlib_libX11

 Are you sure they are no longer needed? Actually, the same is true for
the libdrm patch that removes the XORG7 dependency.

> +	select BR2_PACKAGE_XPROTO_DRI2_PROTO if BR2_PACKAGE_XSERVER_XORG_SERVER
> +	select BR2_PACKAGE_XPROTO_XF86DRIPROTO if BR2_PACKAGE_XSERVER_XORG_SERVER
> +	select BR2_PACKAGE_XLIB_LIBX11 if BR2_PACKAGE_XSERVER_XORG_SERVER
> +	select BR2_PACKAGE_XLIB_LIBXEXT if BR2_PACKAGE_XSERVER_XORG_SERVER
> +	select BR2_PACKAGE_XLIB_LIBXDAMAGE if BR2_PACKAGE_XSERVER_XORG_SERVER
> +	select BR2_PACKAGE_XLIB_LIBXFIXES if BR2_PACKAGE_XSERVER_XORG_SERVER
> +	select BR2_PACKAGE_LIBXCB if BR2_PACKAGE_XSERVER_XORG_SERVER
>  	depends on BR2_INSTALL_LIBSTDCPP
> +	depends on BR2_LARGEFILE
>  	help
>  	  Mesa 3D, an open-source implementation of the OpenGL specification.
> +
> +	  http://mesa3d.org
> +
> +if BR2_PACKAGE_MESA3D
> +
> +menu "libraries"
> +
> +config BR2_PACKAGE_MESA3D_GBM
> +	depends on BR2_PACKAGE_UDEV
> +	bool "gbm support"
> +	help
> +	  Add support for Graphics Buffer Manager.
> +
> +config BR2_PACKAGE_MESA3D_XVMC
> +	bool "xvmc support"
> +	help
> +	  Add support for X Video Motion Compensation.
> +
> +config BR2_PACKAGE_MESA3D_VDPAU
> +	bool "vdpau support"
> +	help
> +	  Add support for Video Decode and Presentation API for Unix.
> +
> +endmenu
> +
> +menu "Drivers"
> +
> +config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_I915

 I think it would be better named BR2_PACKAGE_MESA3D_DRIVER_GALLIUM_I915
so that all drivers start with the same substring. On second thought:
since the configure option has it like this, it is better to keep it
similar to the configure option.

> +	bool "Gallium i915 driver"
> +	depends on BR2_i386 || BR2_x86_64
> +	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
> +	select BR2_PACKAGE_LIBDRM_INTEL
> +	help
> +	  Supports intel chips with Gallium. In most cases, the DRI i965 driver
> +	  should be used as it is better maintained by Intel.
> +
[snip a bunch of drivers]
> +
> +endmenu
> +
> +# The following hidden options inform gallium or dri driver selection.

 I think it would be a bit clearer if these hidden options were defined
before the Drivers menu. Also, the ocmment should be "inform the .mk file
of gallium or dri driver selection".

> +config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
> +	select BR2_PACKAGE_MESA3D_DRIVER
> +	bool
> +
> +config BR2_PACKAGE_MESA3D_DRI_DRIVER
> +	select BR2_PACKAGE_MESA3D_DRIVER
> +	bool
> +
> +config BR2_PACKAGE_MESA3D_DRIVER
> +	bool
> +
> +menu "API Support"
> +depends on BR2_PACKAGE_MESA3D_GALLIUM_DRIVER || BR2_PACKAGE_MESA3D_DRI_DRIVER

 Isn't it simpler to write "depends on BR2_PACKAGE_MESA3D_DRIVER" ?

> +
> +config BR2_PACKAGE_MESA3D_OPENGL
> +	bool "OpenGL"
> +	select BR2_PACKAGE_HAS_OPENGL
> +	help
> +	  Use the Khronos OpenGL API.  This is a desktop computer API and is not
> +	  normally implemented by embedded systems.
> +
> +config BR2_PACKAGE_MESA3D_EGL
> +	bool "EGL"
> +	select BR2_PACKAGE_MESA3D_GBM
> +	select BR2_PACKAGE_HAS_OPENGL_EGL
> +	help
> +	  Use the Khronos EGL APIs. EGL is a window manager for OpenGL applications
> +	  similar to GLX, for X, and WGL, for Windows.
> +
> + config BR2_PACKAGE_MESA3D_OPENGL_ES
> +	bool "OpenGL ES"
> +	select BR2_PACKAGE_HAS_OPENGL_ES
> +	help
> +	  Use the Khronos OpenGL ES APIs.  This is commonly used on embedded
> +	  systems and represents a subset of the OpenGL API.
> +
> +config BR2_PACKAGE_MESA3D_OPENVG
> +	bool "OpenVG"
> +	depends on BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
> +	select BR2_PACKAGE_HAS_OPENVG
> +	select BR2_PACKAGE_MESA3D_OPENGL_EGL
> +	help
> +	  Use the Khronos OpenVG APIs. This is a 2D API commonly used on
> +	  embedded systems.
> +
> +config BR2_PACKAGE_MESA3D_OPENCL
> +	bool "OpenCL"
> +	depends on BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
> +	select BR2_PACKAGE_HAS_OPENCL
> +	help
> +	  Use the Khronos OpenCL APIs. This is a GPU computation language
> +	  commonly used in GPGPU computing applications.
> +
> +endmenu
> +
> +endif
> +
> +comment "mesa3d depends on a toolchain with C++ and largefile support"

 "mesa3d needs a toolchain w/ C++, largefile"

> +	depends on !BR2_LARGEFILE || !BR2_INSTALL_LIBSTDCPP
> diff --git a/package/mesa3d/mesa3d-uclibc-locale.patch b/package/mesa3d/mesa3d-uclibc-locale.patch
> deleted file mode 100644
[snip]
> diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk
> index d4080d4..f12a1f5 100644
> --- a/package/mesa3d/mesa3d.mk
> +++ b/package/mesa3d/mesa3d.mk
> @@ -4,31 +4,15 @@
>  #
>  ################################################################################
>  
> -MESA3D_VERSION = 7.10.3
> -MESA3D_SOURCE = MesaLib-$(MESA3D_VERSION).tar.gz
> -MESA3D_SITE = ftp://ftp.freedesktop.org/pub/mesa/older-versions/7.x/$(MESA3D_VERSION)
> +MESA3D_VERSION = 10.0.3
> +MESA3D_SOURCE = MesaLib-$(MESA3D_VERSION).tar.bz2
> +MESA3D_SITE = ftp://ftp.freedesktop.org/pub/mesa/$(MESA3D_VERSION)
>  MESA3D_LICENSE = MIT, SGI, Khronos
>  MESA3D_LICENSE_FILES = docs/license.html
>  
> -MESA3D_AUTORECONF = YES
>  MESA3D_INSTALL_STAGING = YES
>  
> -MESA3D_CONF_OPT = \
> -	--disable-egl \
> -	--disable-glu \
> -	--disable-glw \
> -	--disable-glut \
> -	--disable-gallium \
> -	--with-driver=dri \
> -	--with-dri-drivers=swrast \
> -	--disable-static
> -
>  MESA3D_DEPENDENCIES = \
> -	xproto_glproto \
> -	xlib_libXxf86vm \
> -	xlib_libXdamage \
> -	xlib_libXfixes \
> -	xproto_dri2proto \
>  	libdrm \
>  	expat \
>  	host-xutil_makedepend \
> @@ -37,4 +21,102 @@ MESA3D_DEPENDENCIES = \
>  	host-bison \
>  	host-flex
>  
> +MESA3D_CONF_OPT = \
> +	--disable-static

 If this is really needed, then it should depend on !PREFER_STATIC and
the comment should be extended.

> +
> +# Libraries
[snip]
> diff --git a/package/opengl/Config.in b/package/opengl/Config.in
> index ed81835..02010a9 100644
> --- a/package/opengl/Config.in
> +++ b/package/opengl/Config.in
> @@ -1,4 +1,5 @@
>  source "package/opengl/libegl/Config.in"
> +source "package/opengl/libgl/Config.in"

 The addition of libgl should be a separate patch.

>  source "package/opengl/libgles/Config.in"
>  source "package/opengl/libopenvg/Config.in"
>  source "package/opengl/libopenmax/Config.in"
> diff --git a/package/opengl/libegl/libegl.mk b/package/opengl/libegl/libegl.mk
> index b2b74f1..8d8e6a4 100644
> --- a/package/opengl/libegl/libegl.mk
> +++ b/package/opengl/libegl/libegl.mk
> @@ -7,6 +7,10 @@
>  LIBEGL_SOURCE =
>  LIBEGL_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENGL_EGL))
>  
> +ifeq ($(BR2_PACKAGE_MESA3D_EGL),y)
> +LIBEGL_DEPENDENCIES += mesa3d
> +endif

 We changed the way that this works. Instead, the mesa3d Config.in should
define BR2_PACKAGE_PROVIDES_OPENGL_EGL. Cfr. rpi-userland.

(I didn't look at the rest any more for lack of time).


 Regards,
 Arnout

> +
>  ifeq ($(LIBEGL_DEPENDENCIES),)
>  define LIBEGL_CONFIGURE_CMDS
>  	echo "No libEGL implementation selected. Configuration error."
> diff --git a/package/opengl/libgl/Config.in b/package/opengl/libgl/Config.in
> new file mode 100644
> index 0000000..5421c86
> --- /dev/null
> +++ b/package/opengl/libgl/Config.in
> @@ -0,0 +1,6 @@
> +config BR2_PACKAGE_HAS_OPENGL_GL
> +	bool
> +
> +config BR2_PACKAGE_PROVIDES_OPENGL_GL
> +	depends on BR2_PACKAGE_HAS_OPENGL_GL
> +	string
> diff --git a/package/opengl/libgl/libgl.mk b/package/opengl/libgl/libgl.mk
> new file mode 100644
> index 0000000..f95a959
> --- /dev/null
> +++ b/package/opengl/libgl/libgl.mk
> @@ -0,0 +1,21 @@
> +################################################################################
> +#
> +# libgl
> +#
> +################################################################################
> +
> +LIBGL_SOURCE =
> +LIBGL_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENGL_GL))
> +
> +ifeq ($(BR2_PACKAGE_MESA_OPENGL),y)
> +LIBGL_DEPENDENCIES += mesa3d
> +endif
> +
> +ifeq ($(LIBGL_DEPENDENCIES),)
> +define LIBGL_CONFIGURE_CMDS
> +	echo "No libGL implementation selected. Configuration error."
> +	exit 1
> +endef
> +endif
> +
> +$(eval $(generic-package))
> diff --git a/package/opengl/libgles/libgles.mk b/package/opengl/libgles/libgles.mk
> index 0dcbaa7..5c1e6d4 100644
> --- a/package/opengl/libgles/libgles.mk
> +++ b/package/opengl/libgles/libgles.mk
> @@ -7,6 +7,10 @@
>  LIBGLES_SOURCE =
>  LIBGLES_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENGL_ES))
>  
> +ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_ES),y)
> +LIBGLES_DEPENDENCIES += mesa3d
> +endif
> +
>  ifeq ($(LIBGLES_DEPENDENCIES),)
>  define LIBGLES_CONFIGURE_CMDS
>  	echo "No libGLES implementation selected. Configuration error."
> diff --git a/package/opengl/libopenvg/libopenvg.mk b/package/opengl/libopenvg/libopenvg.mk
> index ffd9d68..83c600b 100644
> --- a/package/opengl/libopenvg/libopenvg.mk
> +++ b/package/opengl/libopenvg/libopenvg.mk
> @@ -7,6 +7,10 @@
>  LIBOPENVG_SOURCE =
>  LIBOPENVG_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENVG))
>  
> +ifeq ($(BR2_PACKAGE_MESA3D_OPENVG),y)
> +LIBOPENVG_DEPENDENCIES += mesa3d
> +endif
> +
>  ifeq ($(LIBOPENVG_DEPENDENCIES),)
>  define LIBOPENVG_CONFIGURE_CMDS
>  	echo "No libOpenVG implementation selected. Configuration error."
> diff --git a/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk b/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk
> index 4089aab..f5a4db6 100644
> --- a/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk
> +++ b/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk
> @@ -99,7 +99,7 @@ else # modular
>  XSERVER_XORG_SERVER_CONF_OPT += --disable-kdrive --disable-xfbdev
>  endif
>  
> -ifeq ($(BR2_PACKAGE_MESA3D),y)
> +ifeq ($(BR2_PACKAGE_MESA3D_DRIVER),y)
>  XSERVER_XORG_SERVER_DEPENDENCIES += mesa3d xproto_xf86driproto
>  else
>  XSERVER_XORG_SERVER_CONF_OPT += --disable-dri
> @@ -172,7 +172,7 @@ ifneq ($(BR2_PACKAGE_XLIB_LIBDMX),y)
>  XSERVER_XORG_SERVER_CONF_OPT += --disable-dmx
>  endif
>  
> -ifeq ($(BR2_PACKAGE_MESA3D),y)
> +ifeq ($(BR2_PACKAGE_MESA3D_DRIVER),y)
>  XSERVER_XORG_SERVER_CONF_OPT += --enable-glx
>  else
>  XSERVER_XORG_SERVER_CONF_OPT += --disable-glx
> 


-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

^ permalink raw reply	[flat|nested] 21+ messages in thread
* [Buildroot] [PATCH v2 6/7] xorg: Bump xserver_xorg-server version to 1.15.0
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 6/7] xorg: Bump xserver_xorg-server version to 1.15.0 Bernd Kuhls
@ 2014-02-05 16:59   ` Arnout Vandecappelle
  0 siblings, 0 replies; 21+ messages in thread
From: Arnout Vandecappelle @ 2014-02-05 16:59 UTC (permalink / raw)
  To: buildroot

On 04/02/14 19:15, Bernd Kuhls wrote:
> - remove patches applied upstream
> - add new dependency xproto_presentproto
> 
> Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>

Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>


 Regards,
 Arnout

[snip]

-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

^ permalink raw reply	[flat|nested] 21+ messages in thread
* [Buildroot] [PATCH v2 2/7] libdrm: Remove dependency towards X11
  2014-02-05  6:56   ` Arnout Vandecappelle
@ 2014-02-05 18:19     ` Bernd Kuhls
  2014-02-05 20:35     ` Bernd Kuhls
  1 sibling, 0 replies; 21+ messages in thread
From: Bernd Kuhls @ 2014-02-05 18:19 UTC (permalink / raw)
  To: buildroot

Hi,

Arnout Vandecappelle <arnout@mind.be> wrote in
news:52F1E0A6.2060409 at mind.be: 

>  So only the three experimental ARM drivers work without Xorg?

taking a closer look at the required dependencies it seems Xorg is only 
needed for the Intel driver

libdrm 2.4.52 will be compiled with:

  libkms         yes
  Intel API      no
  vmwgfx API     yes
  Radeon API     yes
  Nouveau API    yes
  OMAP API       yes
  EXYNOS API     yes
  Freedreno API  yes

When enabling the Intel API at least xlib_libpciaccess is needed:

checking for PCIACCESS... no
configure: error: Package requirements (pciaccess >= 0.10) were not met:

This is inline with what the LFS team writes:
http://www.linuxfromscratch.org/blfs/view/svn/x/libdrm.html

>  Not for this patch, but does libdrm do anything useful when no driver
>  is selected?

Honestly I do not know, but technically configure does not complain:

libdrm 2.4.52 will be compiled with:

  libkms         no
  Intel API      no
  vmwgfx API     no
  Radeon API     no
  Nouveau API    no
  OMAP API       no
  EXYNOS API     no
  Freedreno API  no

I will repost the patch containing fewer dependencies.

Regards, Bernd

^ permalink raw reply	[flat|nested] 21+ messages in thread
* [Buildroot] [PATCH v2 2/7] libdrm: Remove dependency towards X11
  2014-02-05  6:56   ` Arnout Vandecappelle
  2014-02-05 18:19     ` Bernd Kuhls
@ 2014-02-05 20:35     ` Bernd Kuhls
  2014-02-05 22:49       ` Arnout Vandecappelle
  1 sibling, 1 reply; 21+ messages in thread
From: Bernd Kuhls @ 2014-02-05 20:35 UTC (permalink / raw)
  To: buildroot

Arnout Vandecappelle <arnout@mind.be> wrote in
news:52F1E0A6.2060409 at mind.be: 

> On 04/02/14 19:15, Bernd Kuhls wrote:
>> Signed-off-by: Bernd Kuhls
>> <berndkuhls@hotmail.com> ---
>> v4: rebased v3
>> v3: rebased v2
>> v2: http://patchwork.ozlabs.org/patch/304116/ (Paul Cercueil)
>> v1: http://patchwork.ozlabs.org/patch/278297/ (Spenser Gilliland)

Hi,

Arnout Vandecappelle <arnout@mind.be> wrote in
news:52F1E733.3030005 at mind.be: 

>  This removes the following implicit dependencies (from XORG7):
>         depends on BR2_USE_WCHAR
>         depends on BR2_TOOLCHAIN_HAS_THREADS
>         depends on !BR2_PREFER_STATIC_LIB # dlopen in xlib_libX11
>  Are you sure they are no longer needed? Actually, the same is true for
> the libdrm patch that removes the XORG7 dependency.

I tested a locally revised libdrm patch; using this defconfig

BR2_x86_pentium_mmx=y
BR2_ENABLE_DEBUG=y
BR2_OPTIMIZE_2=y
BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
# BR2_UCLIBC_INSTALL_UTILS is not set
BR2_BINUTILS_VERSION_2_23_2=y
BR2_GCC_VERSION_4_8_X=y
BR2_PACKAGE_LIBDRM=y
BR2_PACKAGE_LIBDRM_RADEON=y
BR2_PACKAGE_LIBDRM_NOUVEAU=y
BR2_PACKAGE_LIBDRM_VMWGFX=y

and compiled libdrm (w/o Intel API) even without BR2_PACKAGE_LIBATOMIC_OPS 
and without BR2_PACKAGE_XLIB_LIBPCIACCESS, so USE_WCHAR, 
TOOLCHAIN_HAS_THREADS and !BR2_PREFER_STATIC_LIB do not seem to be 
necessary for libdrm at all.

Regards, Bernd

^ permalink raw reply	[flat|nested] 21+ messages in thread
* [Buildroot] [PATCH v2 2/7] libdrm: Remove dependency towards X11
  2014-02-05 20:35     ` Bernd Kuhls
@ 2014-02-05 22:49       ` Arnout Vandecappelle
  0 siblings, 0 replies; 21+ messages in thread
From: Arnout Vandecappelle @ 2014-02-05 22:49 UTC (permalink / raw)
  To: buildroot

On 05/02/14 21:35, Bernd Kuhls wrote:
> Arnout Vandecappelle <arnout@mind.be> wrote in
> news:52F1E0A6.2060409 at mind.be: 
> 
>> On 04/02/14 19:15, Bernd Kuhls wrote:
>>> Signed-off-by: Bernd Kuhls
>>> <berndkuhls@hotmail.com> ---
>>> v4: rebased v3
>>> v3: rebased v2
>>> v2: http://patchwork.ozlabs.org/patch/304116/ (Paul Cercueil)
>>> v1: http://patchwork.ozlabs.org/patch/278297/ (Spenser Gilliland)
> 
> Hi,
> 
> Arnout Vandecappelle <arnout@mind.be> wrote in
> news:52F1E733.3030005 at mind.be: 
> 
>>  This removes the following implicit dependencies (from XORG7):
>>         depends on BR2_USE_WCHAR
>>         depends on BR2_TOOLCHAIN_HAS_THREADS
>>         depends on !BR2_PREFER_STATIC_LIB # dlopen in xlib_libX11
>>  Are you sure they are no longer needed? Actually, the same is true for
>> the libdrm patch that removes the XORG7 dependency.
> 
> I tested a locally revised libdrm patch; using this defconfig
> 
> BR2_x86_pentium_mmx=y
> BR2_ENABLE_DEBUG=y
> BR2_OPTIMIZE_2=y
> BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
> # BR2_UCLIBC_INSTALL_UTILS is not set
> BR2_BINUTILS_VERSION_2_23_2=y
> BR2_GCC_VERSION_4_8_X=y
> BR2_PACKAGE_LIBDRM=y
> BR2_PACKAGE_LIBDRM_RADEON=y
> BR2_PACKAGE_LIBDRM_NOUVEAU=y
> BR2_PACKAGE_LIBDRM_VMWGFX=y
> 
> and compiled libdrm (w/o Intel API) even without BR2_PACKAGE_LIBATOMIC_OPS 
> and without BR2_PACKAGE_XLIB_LIBPCIACCESS, so USE_WCHAR, 
> TOOLCHAIN_HAS_THREADS and !BR2_PREFER_STATIC_LIB do not seem to be 
> necessary for libdrm at all.

 Great, thanks!

 Regards,
 Arnout

> 
> Regards, Bernd
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
> 
> 


-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

^ permalink raw reply	[flat|nested] 21+ messages in thread
* [Buildroot] [v2, 5/7] mesa3d: modularize and bump to version 10.0.3
  2014-02-04 18:15 ` [Buildroot] [PATCH v2 5/7] mesa3d: modularize and bump to version 10.0.3 Bernd Kuhls
  2014-02-05  7:24   ` Arnout Vandecappelle
@ 2014-03-06 17:33   ` Sebastien Bourdelin
  2014-03-06 17:40     ` Bernd Kuhls
  1 sibling, 1 reply; 21+ messages in thread
From: Sebastien Bourdelin @ 2014-03-06 17:33 UTC (permalink / raw)
  To: buildroot

Hi bernd,

Are you still working on that patch ?

Regards,
Sebastien.

On 02/04/2014 01:15 PM, Bernd Kuhls wrote:
> Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
>
> ---
> v2: bump to version 10.0.3
> v1: - rebased Spenser Gilliland?s patch, which originally bumped
>       version to 9.1.6 and removed mesa3d-uclibc-locale.patch:
>       http://patchwork.ozlabs.org/patch/278303/
>     - removed MESA3D_AUTORECONF=yes, not needed anymore
>     - fixed bug in variable naming
>       BR2_PACKAGE_MESA3D_DRI_DRIVERS_* -> BR2_PACKAGE_MESA3D_DRI_DRIVER_*
>       preventing DRI drivers from being built
>     - bump version to 10.0.2
>
>  package/mesa3d/Config.in                           |  180 +++++++++++++++++++-
>  package/mesa3d/mesa3d-uclibc-locale.patch          |   56 ------
>  package/mesa3d/mesa3d.mk                           |  120 ++++++++++---
>  package/opengl/Config.in                           |    1 +
>  package/opengl/libegl/libegl.mk                    |    4 +
>  package/opengl/libgl/Config.in                     |    6 +
>  package/opengl/libgl/libgl.mk                      |   21 +++
>  package/opengl/libgles/libgles.mk                  |    4 +
>  package/opengl/libopenvg/libopenvg.mk              |    4 +
>  .../xserver_xorg-server/xserver_xorg-server.mk     |    4 +-
>  10 files changed, 317 insertions(+), 83 deletions(-)
>  delete mode 100644 package/mesa3d/mesa3d-uclibc-locale.patch
>  create mode 100644 package/opengl/libgl/Config.in
>  create mode 100644 package/opengl/libgl/libgl.mk
>
> diff --git a/package/mesa3d/Config.in b/package/mesa3d/Config.in
> index 0ce168e..b797dfb 100644
> --- a/package/mesa3d/Config.in
> +++ b/package/mesa3d/Config.in
> @@ -1,14 +1,182 @@
>  config BR2_PACKAGE_MESA3D
>  	bool "Mesa 3D Graphics Library"
> -	select BR2_PACKAGE_XPROTO_GLPROTO
> -	select BR2_PACKAGE_XLIB_LIBXXF86VM
> -	select BR2_PACKAGE_XLIB_LIBXDAMAGE
> -	select BR2_PACKAGE_XLIB_LIBXFIXES
> -	select BR2_PACKAGE_XPROTO_DRI2PROTO
>  	select BR2_PACKAGE_LIBDRM
>  	select BR2_PACKAGE_EXPAT
>  	select BR2_PACKAGE_HOST_LIBXML2_PYTHON
> -	depends on BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR
> +	select BR2_PACKAGE_XPROTO_DRI2_PROTO if BR2_PACKAGE_XSERVER_XORG_SERVER
> +	select BR2_PACKAGE_XPROTO_XF86DRIPROTO if BR2_PACKAGE_XSERVER_XORG_SERVER
> +	select BR2_PACKAGE_XLIB_LIBX11 if BR2_PACKAGE_XSERVER_XORG_SERVER
> +	select BR2_PACKAGE_XLIB_LIBXEXT if BR2_PACKAGE_XSERVER_XORG_SERVER
> +	select BR2_PACKAGE_XLIB_LIBXDAMAGE if BR2_PACKAGE_XSERVER_XORG_SERVER
> +	select BR2_PACKAGE_XLIB_LIBXFIXES if BR2_PACKAGE_XSERVER_XORG_SERVER
> +	select BR2_PACKAGE_LIBXCB if BR2_PACKAGE_XSERVER_XORG_SERVER
>  	depends on BR2_INSTALL_LIBSTDCPP
> +	depends on BR2_LARGEFILE
>  	help
>  	  Mesa 3D, an open-source implementation of the OpenGL specification.
> +
> +	  http://mesa3d.org
> +
> +if BR2_PACKAGE_MESA3D
> +
> +menu "libraries"
> +
> +config BR2_PACKAGE_MESA3D_GBM
> +	depends on BR2_PACKAGE_UDEV
> +	bool "gbm support"
> +	help
> +	  Add support for Graphics Buffer Manager.
> +
> +config BR2_PACKAGE_MESA3D_XVMC
> +	bool "xvmc support"
> +	help
> +	  Add support for X Video Motion Compensation.
> +
> +config BR2_PACKAGE_MESA3D_VDPAU
> +	bool "vdpau support"
> +	help
> +	  Add support for Video Decode and Presentation API for Unix.
> +
> +endmenu
> +
> +menu "Drivers"
> +
> +config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_I915
> +	bool "Gallium i915 driver"
> +	depends on BR2_i386 || BR2_x86_64
> +	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
> +	select BR2_PACKAGE_LIBDRM_INTEL
> +	help
> +	  Supports intel chips with Gallium. In most cases, the DRI i965 driver
> +	  should be used as it is better maintained by Intel.
> +
> +config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_NOUVEAU
> +	bool "Gallium nouveau driver"
> +	depends on BR2_i386 || BR2_x86_64
> +	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
> +	select BR2_PACKAGE_LIBDRM_NOUVEAU
> +	help
> +	  Supports all Nvidia GPUs.
> +
> +config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R300
> +	bool "Gallium r300 driver"
> +	depends on BR2_i386 || BR2_x86_64
> +	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
> +	select BR2_PACKAGE_LIBDRM_RADEON
> +	help
> +	  Supports the R300, R400, and R500 series of ATI/AMD GPUs.
> +
> +config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R600
> +	bool "Gallium r600 driver"
> +	depends on BR2_i386 || BR2_x86_64
> +	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
> +	select BR2_PACKAGE_LIBDRM_RADEON
> +	help
> +	  Supports the R600, R700, and R800 series of ATI/AMD GPUs.
> +
> +config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_RADEONSI
> +	bool "Gallium radeonsi driver"
> +	depends on BR2_i386 || BR2_x86_64
> +	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
> +	select BR2_PACKAGE_LIBDRM_RADEON
> +	help
> +	  Supports the Radeon HD7000/HD8000/HD9000 series of ATI/AMD GPUs.
> +
> +config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SVGA
> +	bool "Gallium vmware svga driver"
> +	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
> +	select BR2_PACKAGE_LIBDRM_VMWGFX
> +	help
> +	  This is a virtual GPU driver for VMWare virtual machines.
> +
> +config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST
> +	bool "Gallium swrast driver"
> +	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
> +	help
> +	  This is a software opengl implementation using the Gallium3D
> +	  infrastructure.
> +
> +config BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST
> +	bool "DRI swrast driver"
> +	select BR2_PACKAGE_MESA3D_DRI_DRIVER
> +	help
> +	  This is a software opengl implementation using the DRI infrastructure.
> +
> +config BR2_PACKAGE_MESA3D_DRI_DRIVER_I965
> +	bool "DRI i965 driver"
> +	depends on BR2_i386 || BR2_x86_64
> +	select BR2_PACKAGE_MESA3D_DRI_DRIVER
> +	select BR2_PACKAGE_LIBDRM_INTEL
> +	help
> +	  Supports all Intel GPUs.  This version is most supported by Intel.
> +
> +config BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON
> +	bool "DRI radeon driver"
> +	depends on BR2_i386 || BR2_x86_64
> +	select BR2_PACKAGE_MESA3D_DRI_DRIVER
> +	select BR2_PACKAGE_LIBDRM_RADEON
> +	help
> +	  Legacy Radeon driver for R100 series GPUs.
> +
> +endmenu
> +
> +# The following hidden options inform gallium or dri driver selection.
> +config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
> +	select BR2_PACKAGE_MESA3D_DRIVER
> +	bool
> +
> +config BR2_PACKAGE_MESA3D_DRI_DRIVER
> +	select BR2_PACKAGE_MESA3D_DRIVER
> +	bool
> +
> +config BR2_PACKAGE_MESA3D_DRIVER
> +	bool
> +
> +menu "API Support"
> +depends on BR2_PACKAGE_MESA3D_GALLIUM_DRIVER || BR2_PACKAGE_MESA3D_DRI_DRIVER
> +
> +config BR2_PACKAGE_MESA3D_OPENGL
> +	bool "OpenGL"
> +	select BR2_PACKAGE_HAS_OPENGL
> +	help
> +	  Use the Khronos OpenGL API.  This is a desktop computer API and is not
> +	  normally implemented by embedded systems.
> +
> +config BR2_PACKAGE_MESA3D_EGL
> +	bool "EGL"
> +	select BR2_PACKAGE_MESA3D_GBM
> +	select BR2_PACKAGE_HAS_OPENGL_EGL
> +	help
> +	  Use the Khronos EGL APIs. EGL is a window manager for OpenGL applications
> +	  similar to GLX, for X, and WGL, for Windows.
> +
> + config BR2_PACKAGE_MESA3D_OPENGL_ES
> +	bool "OpenGL ES"
> +	select BR2_PACKAGE_HAS_OPENGL_ES
> +	help
> +	  Use the Khronos OpenGL ES APIs.  This is commonly used on embedded
> +	  systems and represents a subset of the OpenGL API.
> +
> +config BR2_PACKAGE_MESA3D_OPENVG
> +	bool "OpenVG"
> +	depends on BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
> +	select BR2_PACKAGE_HAS_OPENVG
> +	select BR2_PACKAGE_MESA3D_OPENGL_EGL
> +	help
> +	  Use the Khronos OpenVG APIs. This is a 2D API commonly used on
> +	  embedded systems.
> +
> +config BR2_PACKAGE_MESA3D_OPENCL
> +	bool "OpenCL"
> +	depends on BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
> +	select BR2_PACKAGE_HAS_OPENCL
> +	help
> +	  Use the Khronos OpenCL APIs. This is a GPU computation language
> +	  commonly used in GPGPU computing applications.
> +
> +endmenu
> +
> +endif
> +
> +comment "mesa3d depends on a toolchain with C++ and largefile support"
> +	depends on !BR2_LARGEFILE || !BR2_INSTALL_LIBSTDCPP
> diff --git a/package/mesa3d/mesa3d-uclibc-locale.patch b/package/mesa3d/mesa3d-uclibc-locale.patch
> deleted file mode 100644
> index 99afe8d..0000000
> --- a/package/mesa3d/mesa3d-uclibc-locale.patch
> +++ /dev/null
> @@ -1,56 +0,0 @@
> -[PATCH] Fix compilation on uClibc without locale support
> -
> -Based on similar patch from OE:
> -
> -http://git.openembedded.org/openembedded-core/commit/meta/recipes-graphics/mesa/mesa/0001-Compile-with-uclibc.patch?id=e4039eb74b20e96d4b8837cd58cf2d13d091e1ad
> -
> -Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
> ----
> - configure.ac            |    3 +++
> - src/glsl/strtod.c       |    2 +-
> - src/mesa/main/imports.c |    2 +-
> - 3 files changed, 5 insertions(+), 2 deletions(-)
> -
> -diff --git a/configure.ac b/configure.ac
> -index fbaa376..454dad2 100644
> ---- a/configure.ac
> -+++ b/configure.ac
> -@@ -450,6 +450,9 @@ AC_SUBST([DLOPEN_LIBS])
> - dnl See if posix_memalign is available
> - AC_CHECK_FUNC([posix_memalign], [DEFINES="$DEFINES -DHAVE_POSIX_MEMALIGN"])
> - 
> -+dnl See if newlocale is available
> -+AC_CHECK_FUNCS_ONCE(newlocale)
> -+
> - dnl SELinux awareness.
> - AC_ARG_ENABLE([selinux],
> -     [AS_HELP_STRING([--enable-selinux],
> -diff --git a/src/glsl/strtod.c b/src/glsl/strtod.c
> -index a876e13..9fce7e9 100644
> ---- a/src/glsl/strtod.c
> -+++ b/src/glsl/strtod.c
> -@@ -44,7 +44,7 @@ double
> - double
> - glsl_strtod(const char *s, char **end)
> - {
> --#if defined(_GNU_SOURCE) && !defined(__CYGWIN__) && !defined(__FreeBSD__)
> -+#if defined(_GNU_SOURCE) && !defined(__CYGWIN__) && !defined(__FreeBSD__) && defined(HAVE_NEWLOCALE)
> -    static locale_t loc = NULL;
> -    if (!loc) {
> -       loc = newlocale(LC_CTYPE_MASK, "C", NULL);
> -diff --git a/src/mesa/main/imports.c b/src/mesa/main/imports.c
> -index d3727ef..363bf32 100644
> ---- a/src/mesa/main/imports.c
> -+++ b/src/mesa/main/imports.c
> -@@ -757,7 +757,7 @@ float
> - float
> - _mesa_strtof( const char *s, char **end )
> - {
> --#if defined(_GNU_SOURCE) && !defined(__CYGWIN__) && !defined(__FreeBSD__)
> -+#if defined(_GNU_SOURCE) && !defined(__CYGWIN__) && !defined(__FreeBSD__) && defined(HAVE_NEWLOCALE)
> -    static locale_t loc = NULL;
> -    if (!loc) {
> -       loc = newlocale(LC_CTYPE_MASK, "C", NULL);
> --- 
> -1.7.10.4
> -
> diff --git a/package/mesa3d/mesa3d.mk b/package/mesa3d/mesa3d.mk
> index d4080d4..f12a1f5 100644
> --- a/package/mesa3d/mesa3d.mk
> +++ b/package/mesa3d/mesa3d.mk
> @@ -4,31 +4,15 @@
>  #
>  ################################################################################
>  
> -MESA3D_VERSION = 7.10.3
> -MESA3D_SOURCE = MesaLib-$(MESA3D_VERSION).tar.gz
> -MESA3D_SITE = ftp://ftp.freedesktop.org/pub/mesa/older-versions/7.x/$(MESA3D_VERSION)
> +MESA3D_VERSION = 10.0.3
> +MESA3D_SOURCE = MesaLib-$(MESA3D_VERSION).tar.bz2
> +MESA3D_SITE = ftp://ftp.freedesktop.org/pub/mesa/$(MESA3D_VERSION)
>  MESA3D_LICENSE = MIT, SGI, Khronos
>  MESA3D_LICENSE_FILES = docs/license.html
>  
> -MESA3D_AUTORECONF = YES
>  MESA3D_INSTALL_STAGING = YES
>  
> -MESA3D_CONF_OPT = \
> -	--disable-egl \
> -	--disable-glu \
> -	--disable-glw \
> -	--disable-glut \
> -	--disable-gallium \
> -	--with-driver=dri \
> -	--with-dri-drivers=swrast \
> -	--disable-static
> -
>  MESA3D_DEPENDENCIES = \
> -	xproto_glproto \
> -	xlib_libXxf86vm \
> -	xlib_libXdamage \
> -	xlib_libXfixes \
> -	xproto_dri2proto \
>  	libdrm \
>  	expat \
>  	host-xutil_makedepend \
> @@ -37,4 +21,102 @@ MESA3D_DEPENDENCIES = \
>  	host-bison \
>  	host-flex
>  
> +MESA3D_CONF_OPT = \
> +	--disable-static
> +
> +# Libraries
> +
> +ifeq ($(BR2_PACKAGE_MESA3D_GBM),y)
> +MESA3D_DEPENDENCIES += udev
> +MESA3D_CONF_OPT += --enable-gbm
> +else
> +MESA3D_CONF_OPT += --disable-gbm
> +endif
> +
> +ifeq ($(BR2_PACKAGE_XSERVER_XORG_SERVER),y)
> +MESA3D_DEPENDENCIES += \
> +	xproto_xf86driproto xproto_dri2proto xproto_glproto \
> +	xlib_libX11 xlib_libXext xlib_libXdamage xlib_libXfixes libxcb
> +MESA3D_CONF_OPT += \
> +	--enable-dri \
> +	--enable-xa \
> +	--enable-glx
> +else
> +MESA3D_CONF_OPT += \
> +	--disable-dri \
> +	--disable-xa \
> +	--disable-glx
> +endif
> +
> +# Drivers
> +
> +#Gallium Drivers
> +MESA3D_GALLIUM_DRIVERS-$(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_I915)     += i915
> +MESA3D_GALLIUM_DRIVERS-$(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_NOUVEAU)  += nouveau
> +MESA3D_GALLIUM_DRIVERS-$(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R300)     += r300
> +MESA3D_GALLIUM_DRIVERS-$(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R600)     += r600
> +MESA3D_GALLIUM_DRIVERS-$(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_RADEONSI) += radeonsi
> +MESA3D_GALLIUM_DRIVERS-$(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SVGA)     += svga
> +MESA3D_GALLIUM_DRIVERS-$(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST)   += swrast
> +# DRI Drivers
> +MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST) += swrast
> +MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_I965)   += i965
> +MESA3D_DRI_DRIVERS-$(BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON) += radeon
> +
> +ifeq ($(BR2_PACKAGE_MESA3D_GALLIUM_DRIVER),y)
> +MESA3D_CONF_OPT += \
> +	--with-gallium-drivers=$(subst $(space),$(comma),$(MESA3D_GALLIUM_DRIVERS-y))
> +else
> +MESA3D_CONF_OPT += --without-gallium-drivers
> +endif
> +
> +ifeq ($(BR2_PACKAGE_MESA3D_DRI_DRIVER),y)
> +MESA3D_CONF_OPT += \
> +	--with-dri-drivers=$(subst $(space),$(comma),$(MESA3D_DRI_DRIVERS-y))
> +else
> +MESA3D_CONF_OPT += --without-dri-drivers
> +endif
> +
> +# APIs
> +
> +ifeq ($(BR2_PACKAGE_MESA3D_EGL),y)
> +MESA3D_EGL_PLATFORMS = drm
> +ifeq ($(BR2_PACKAGE_WAYLAND),y)
> +MESA3D_DEPENDENCIES += wayland
> +MESA3D_EGL_PLATFORMS += wayland
> +endif
> +ifeq ($(BR2_PACKAGE_XSERVER_XORG_SERVER),y)
> +MESA3D_EGL_PLATFORMS += x11
> +endif
> +MESA3D_CONF_OPT += \
> +	--enable-egl \
> +	--with-egl-platforms=$(foreach subst $(space),$(comma),$(MESA3D_EGL_PLATFORMS))
> +else
> +MESA3D_CONF_OPT += --disable-egl
> +endif
> +
> +ifeq ($(BR2_PACKAGE_MESA3D_OPENGL),y)
> +MESA3D_CONF_OPT += --enable-opengl
> +else
> +MESA3D_CONF_OPT += --disable-opengl
> +endif
> +
> +ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_ES),y)
> +MESA3D_CONF_OPT += --enable-gles1 --enable-gles2
> +else
> +MESA3D_CONF_OPT += --disable-gles1 --disable-gles2
> +endif
> +
> +ifeq ($(BR2_PACKAGE_MESA3D_OPENVG),y)
> +MESA3D_CONF_OPT += --enable-openvg --enable-gallium-egl
> +else
> +MESA3D_CONF_OPT += --disable-openvg --disable-gallium-egl
> +endif
> +
> +ifeq ($(BR2_PACKAGE_MESA3D_OPENCL),y)
> +MESA3D_CONF_OPT += --enable-opencl
> +else
> +MESA3D_CONF_OPT += --disable-opencl
> +endif
> +
>  $(eval $(autotools-package))
> diff --git a/package/opengl/Config.in b/package/opengl/Config.in
> index ed81835..02010a9 100644
> --- a/package/opengl/Config.in
> +++ b/package/opengl/Config.in
> @@ -1,4 +1,5 @@
>  source "package/opengl/libegl/Config.in"
> +source "package/opengl/libgl/Config.in"
>  source "package/opengl/libgles/Config.in"
>  source "package/opengl/libopenvg/Config.in"
>  source "package/opengl/libopenmax/Config.in"
> diff --git a/package/opengl/libegl/libegl.mk b/package/opengl/libegl/libegl.mk
> index b2b74f1..8d8e6a4 100644
> --- a/package/opengl/libegl/libegl.mk
> +++ b/package/opengl/libegl/libegl.mk
> @@ -7,6 +7,10 @@
>  LIBEGL_SOURCE =
>  LIBEGL_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENGL_EGL))
>  
> +ifeq ($(BR2_PACKAGE_MESA3D_EGL),y)
> +LIBEGL_DEPENDENCIES += mesa3d
> +endif
> +
>  ifeq ($(LIBEGL_DEPENDENCIES),)
>  define LIBEGL_CONFIGURE_CMDS
>  	echo "No libEGL implementation selected. Configuration error."
> diff --git a/package/opengl/libgl/Config.in b/package/opengl/libgl/Config.in
> new file mode 100644
> index 0000000..5421c86
> --- /dev/null
> +++ b/package/opengl/libgl/Config.in
> @@ -0,0 +1,6 @@
> +config BR2_PACKAGE_HAS_OPENGL_GL
> +	bool
> +
> +config BR2_PACKAGE_PROVIDES_OPENGL_GL
> +	depends on BR2_PACKAGE_HAS_OPENGL_GL
> +	string
> diff --git a/package/opengl/libgl/libgl.mk b/package/opengl/libgl/libgl.mk
> new file mode 100644
> index 0000000..f95a959
> --- /dev/null
> +++ b/package/opengl/libgl/libgl.mk
> @@ -0,0 +1,21 @@
> +################################################################################
> +#
> +# libgl
> +#
> +################################################################################
> +
> +LIBGL_SOURCE =
> +LIBGL_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENGL_GL))
> +
> +ifeq ($(BR2_PACKAGE_MESA_OPENGL),y)
> +LIBGL_DEPENDENCIES += mesa3d
> +endif
> +
> +ifeq ($(LIBGL_DEPENDENCIES),)
> +define LIBGL_CONFIGURE_CMDS
> +	echo "No libGL implementation selected. Configuration error."
> +	exit 1
> +endef
> +endif
> +
> +$(eval $(generic-package))
> diff --git a/package/opengl/libgles/libgles.mk b/package/opengl/libgles/libgles.mk
> index 0dcbaa7..5c1e6d4 100644
> --- a/package/opengl/libgles/libgles.mk
> +++ b/package/opengl/libgles/libgles.mk
> @@ -7,6 +7,10 @@
>  LIBGLES_SOURCE =
>  LIBGLES_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENGL_ES))
>  
> +ifeq ($(BR2_PACKAGE_MESA3D_OPENGL_ES),y)
> +LIBGLES_DEPENDENCIES += mesa3d
> +endif
> +
>  ifeq ($(LIBGLES_DEPENDENCIES),)
>  define LIBGLES_CONFIGURE_CMDS
>  	echo "No libGLES implementation selected. Configuration error."
> diff --git a/package/opengl/libopenvg/libopenvg.mk b/package/opengl/libopenvg/libopenvg.mk
> index ffd9d68..83c600b 100644
> --- a/package/opengl/libopenvg/libopenvg.mk
> +++ b/package/opengl/libopenvg/libopenvg.mk
> @@ -7,6 +7,10 @@
>  LIBOPENVG_SOURCE =
>  LIBOPENVG_DEPENDENCIES = $(call qstrip,$(BR2_PACKAGE_PROVIDES_OPENVG))
>  
> +ifeq ($(BR2_PACKAGE_MESA3D_OPENVG),y)
> +LIBOPENVG_DEPENDENCIES += mesa3d
> +endif
> +
>  ifeq ($(LIBOPENVG_DEPENDENCIES),)
>  define LIBOPENVG_CONFIGURE_CMDS
>  	echo "No libOpenVG implementation selected. Configuration error."
> diff --git a/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk b/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk
> index 4089aab..f5a4db6 100644
> --- a/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk
> +++ b/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk
> @@ -99,7 +99,7 @@ else # modular
>  XSERVER_XORG_SERVER_CONF_OPT += --disable-kdrive --disable-xfbdev
>  endif
>  
> -ifeq ($(BR2_PACKAGE_MESA3D),y)
> +ifeq ($(BR2_PACKAGE_MESA3D_DRIVER),y)
>  XSERVER_XORG_SERVER_DEPENDENCIES += mesa3d xproto_xf86driproto
>  else
>  XSERVER_XORG_SERVER_CONF_OPT += --disable-dri
> @@ -172,7 +172,7 @@ ifneq ($(BR2_PACKAGE_XLIB_LIBDMX),y)
>  XSERVER_XORG_SERVER_CONF_OPT += --disable-dmx
>  endif
>  
> -ifeq ($(BR2_PACKAGE_MESA3D),y)
> +ifeq ($(BR2_PACKAGE_MESA3D_DRIVER),y)
>  XSERVER_XORG_SERVER_CONF_OPT += --enable-glx
>  else
>  XSERVER_XORG_SERVER_CONF_OPT += --disable-glx

^ permalink raw reply	[flat|nested] 21+ messages in thread
* [Buildroot] [v2, 5/7] mesa3d: modularize and bump to version 10.0.3
  2014-03-06 17:33   ` [Buildroot] [v2, " Sebastien Bourdelin
@ 2014-03-06 17:40     ` Bernd Kuhls
  2014-03-06 18:06       ` Sebastien Bourdelin
  2014-03-06 21:45       ` Thomas Petazzoni
  0 siblings, 2 replies; 21+ messages in thread
From: Bernd Kuhls @ 2014-03-06 17:40 UTC (permalink / raw)
  To: buildroot

Sebastien Bourdelin
<sebastien.bourdelin@savoirfairelinux.com>
wrote in news:5318B183.60005 at savoirfairelinux.com: 

> Hi bernd,
> Are you still working on that patch ?
> Regards,
> Sebastien.

Hi,

yes, just yesterday ;)

Regards, Bernd

^ permalink raw reply	[flat|nested] 21+ messages in thread
* [Buildroot] [v2, 5/7] mesa3d: modularize and bump to version 10.0.3
  2014-03-06 17:40     ` Bernd Kuhls
@ 2014-03-06 18:06       ` Sebastien Bourdelin
  2014-03-06 21:45       ` Thomas Petazzoni
  1 sibling, 0 replies; 21+ messages in thread
From: Sebastien Bourdelin @ 2014-03-06 18:06 UTC (permalink / raw)
  To: buildroot

Great, thanks

Regards,
Sebastien.


On 03/06/2014 12:40 PM, Bernd Kuhls wrote:
> Sebastien Bourdelin
> <sebastien.bourdelin@savoirfairelinux.com>
> wrote in news:5318B183.60005 at savoirfairelinux.com: 
>
>> Hi bernd,
>> Are you still working on that patch ?
>> Regards,
>> Sebastien.
> Hi,
>
> yes, just yesterday ;)
>
> Regards, Bernd
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

^ permalink raw reply	[flat|nested] 21+ messages in thread
* [Buildroot] [v2, 5/7] mesa3d: modularize and bump to version 10.0.3
  2014-03-06 17:40     ` Bernd Kuhls
  2014-03-06 18:06       ` Sebastien Bourdelin
@ 2014-03-06 21:45       ` Thomas Petazzoni
  2014-03-07  6:03         ` Bernd Kuhls
  1 sibling, 1 reply; 21+ messages in thread
From: Thomas Petazzoni @ 2014-03-06 21:45 UTC (permalink / raw)
  To: buildroot

Dear Bernd Kuhls,

On Thu, 06 Mar 2014 18:40:21 +0100, Bernd Kuhls wrote:
> Sebastien Bourdelin
> <sebastien.bourdelin@savoirfairelinux.com>
> wrote in news:5318B183.60005 at savoirfairelinux.com: 
> 
> > Hi bernd,
> > Are you still working on that patch ?
> > Regards,
> > Sebastien.
> 
> Hi,
> 
> yes, just yesterday ;)

So you will resubmit a new version?

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 21+ messages in thread
* [Buildroot] [v2, 5/7] mesa3d: modularize and bump to version 10.0.3
  2014-03-06 21:45       ` Thomas Petazzoni
@ 2014-03-07  6:03         ` Bernd Kuhls
  2014-03-07 11:02           ` Thomas Petazzoni
  0 siblings, 1 reply; 21+ messages in thread
From: Bernd Kuhls @ 2014-03-07  6:03 UTC (permalink / raw)
  To: buildroot

Thomas Petazzoni
<thomas.petazzoni@free-electrons.com> wrote
in news:20140306224559.080a6fb3 at skate: 

> So you will resubmit a new version?

Hi,

yes, but I need several days for testing the several combinations of 
Config.in-options. During yesterdays testing some questions came up:

Is it correct that buildroot lacks llvm support?
If true, I have to remove some radeon-related options Spenser added:
http://www.linuxfromscratch.org/blfs/view/svn/x/mesalib.html

Also I could not find libclc/OpenCL as buildroot package:
http://cgit.freedesktop.org/mesa/mesa/commit/?
id=a64d3dd1358fe0f69ebbf10da35c9ebd672e6f9d

The current mesa3d.mk in buildroot only builds the swrast driver, my personal 
need is to extend the package to compile the i965 drm driver so I will 
concentrate on this. It does not need the dependencies I mentioned above.

Regards, Bernd

^ permalink raw reply	[flat|nested] 21+ messages in thread
* [Buildroot] [v2, 5/7] mesa3d: modularize and bump to version 10.0.3
  2014-03-07  6:03         ` Bernd Kuhls
@ 2014-03-07 11:02           ` Thomas Petazzoni
  0 siblings, 0 replies; 21+ messages in thread
From: Thomas Petazzoni @ 2014-03-07 11:02 UTC (permalink / raw)
  To: buildroot

Dear Bernd Kuhls,

On Fri, 07 Mar 2014 07:03:46 +0100, Bernd Kuhls wrote:

> yes, but I need several days for testing the several combinations of 
> Config.in-options. During yesterdays testing some questions came up:
> 
> Is it correct that buildroot lacks llvm support?

Indeed, we don't have LLVM support.

> If true, I have to remove some radeon-related options Spenser added:
> http://www.linuxfromscratch.org/blfs/view/svn/x/mesalib.html

Probably yes, I am clearly not very knowledgeable about Mesa
dependencies.

> Also I could not find libclc/OpenCL as buildroot package:
> http://cgit.freedesktop.org/mesa/mesa/commit/?
> id=a64d3dd1358fe0f69ebbf10da35c9ebd672e6f9d

This is only when --enable-opencl is used, no?

> The current mesa3d.mk in buildroot only builds the swrast driver, my personal 
> need is to extend the package to compile the i965 drm driver so I will 
> concentrate on this. It does not need the dependencies I mentioned above.

Yes, that's fine. As long as we make progress by bumping mesa, allow to
build it outside of X11, there is no need to support each and every
possible combinations from the beginning. The package can be
progressively improved.

Best regards,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 21+ messages in thread
end of thread, other threads:[~2014-03-07 11:02 UTC | newest]

Thread overview: 21+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <1391537725-15894-1-git-send-email-berndkuhls@hotmail.com>
2014-02-04 18:15 ` [Buildroot] [PATCH v2 1/7] xlib_libpthread-stubs: Rename package to libpthread-stubs Bernd Kuhls
2014-02-05  6:50   ` Arnout Vandecappelle
2014-02-04 18:15 ` [Buildroot] [PATCH v2 2/7] libdrm: Remove dependency towards X11 Bernd Kuhls
2014-02-05  6:56   ` Arnout Vandecappelle
2014-02-05 18:19     ` Bernd Kuhls
2014-02-05 20:35     ` Bernd Kuhls
2014-02-05 22:49       ` Arnout Vandecappelle
2014-02-04 18:15 ` [Buildroot] [PATCH v2 3/7] libdrm: bump to version 2.4.52 Bernd Kuhls
2014-02-04 18:15 ` [Buildroot] [PATCH v2 4/7] mesa3d: pull out from x11 Bernd Kuhls
2014-02-05  6:59   ` Arnout Vandecappelle
2014-02-04 18:15 ` [Buildroot] [PATCH v2 5/7] mesa3d: modularize and bump to version 10.0.3 Bernd Kuhls
2014-02-05  7:24   ` Arnout Vandecappelle
2014-03-06 17:33   ` [Buildroot] [v2, " Sebastien Bourdelin
2014-03-06 17:40     ` Bernd Kuhls
2014-03-06 18:06       ` Sebastien Bourdelin
2014-03-06 21:45       ` Thomas Petazzoni
2014-03-07  6:03         ` Bernd Kuhls
2014-03-07 11:02           ` Thomas Petazzoni
2014-02-04 18:15 ` [Buildroot] [PATCH v2 6/7] xorg: Bump xserver_xorg-server version to 1.15.0 Bernd Kuhls
2014-02-05 16:59   ` Arnout Vandecappelle
2014-02-04 18:15 ` [Buildroot] [PATCH v2 7/7] xdriver_xf86-video-intel: Bump version to 2.99.909 Bernd Kuhls

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox