[Buildroot] [PATCH 00/11] Round of external toolchain updates

Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed

* [Buildroot] [PATCH 00/11] Round of external toolchain updates
@ 2014-06-01 10:47 Thomas Petazzoni
  2014-06-01 10:47 ` [Buildroot] [PATCH 01/11] toolchain-external: apply kernel headers check to non-custom toolchains Thomas Petazzoni
                   ` (10 more replies)
  0 siblings, 11 replies; 27+ messages in thread
From: Thomas Petazzoni @ 2014-06-01 10:47 UTC (permalink / raw)
  To: buildroot

Hello,

Here is a round of external toolchain updates, mainly bumping the
versions of the various toolchains we have, and a few improvements to
the kernel headers version check.

Thanks,

Thomas

Thomas Petazzoni (11):
  toolchain-external: apply kernel headers check to non-custom
    toolchains
  toolchain-external: do not pass TOOLCHAIN_EXTERNAL_CFLAGS for kernel
    headers check
  toolchain-external: support only one Linaro ARM toolchain at a time
  toolchain-external: support only one Linaro AArch64 toolchain at a
    time
  toolchain-external: bump Linaro ARM to 2014.05
  toolchain-external: bump Linaro ARMeb toolchain to 2014.04
  toolchain-external: bump Linaro AArch64 toolchain to 2014.05
  toolchain-external: bump musl external toolchains to 1.1.1
  toolchain-external: add CodeSourcery MIPS 2014.05, remove 2012.09
  toolchain-external: add CodeSourcery PowerPC 2012.03
  toolchain-external: add ADI Blackfin 2014R1 toolchain, remove 2012R1

 toolchain/toolchain-external/Config.in             | 200 +++++++++------------
 toolchain/toolchain-external/toolchain-external.mk |  86 ++++-----
 2 files changed, 119 insertions(+), 167 deletions(-)

-- 
1.9.3

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 01/11] toolchain-external: apply kernel headers check to non-custom toolchains
  2014-06-01 10:47 [Buildroot] [PATCH 00/11] Round of external toolchain updates Thomas Petazzoni
@ 2014-06-01 10:47 ` Thomas Petazzoni
  2014-06-08 16:10   ` Yann E. MORIN
  2014-06-01 10:47 ` [Buildroot] [PATCH 02/11] toolchain-external: do not pass TOOLCHAIN_EXTERNAL_CFLAGS for kernel headers check Thomas Petazzoni
                   ` (9 subsequent siblings)
  10 siblings, 1 reply; 27+ messages in thread
From: Thomas Petazzoni @ 2014-06-01 10:47 UTC (permalink / raw)
  To: buildroot

Since the introduction of the kernel headers Config.in options, the
external toolchain logic had a check for custom external toolchains to
verify that the kernel headers version entered by the user matches the
one of the toolchain. However, this check was not made for non-custom
external toolchains (i.e the built-in profiles, such as Linaro,
CodeSourcery and al.), making the assumption that the Buildroot
developers will do the right selection.

However, it is quite nice when bumping external toolchains to have
this automatic kernel headers version check, to ensure we select the
appropriate kernel headers version.

Therefore, this commit makes the kernel headers version check
applicable to non-custom external toolchains.

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 toolchain/toolchain-external/toolchain-external.mk | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index c73cc4a..70781db 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -466,11 +466,9 @@ define TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS
 		@echo "External toolchain doesn't support --sysroot. Cannot use." ; \
 		exit 1 ; \
 	fi ; \
-	if [ "$(BR2_TOOLCHAIN_EXTERNAL_CUSTOM)" = "y" ]; then \
-		$(call check_kernel_headers_version,\
-			$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)),\
-			$(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \
-	fi ; \
+	$(call check_kernel_headers_version,\
+		$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)),\
+		$(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \
 	if test "$(BR2_arm)" = "y" ; then \
 		$(call check_arm_abi,\
 			"$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)",\
-- 
1.9.3

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 01/11] toolchain-external: apply kernel headers check to non-custom toolchains
  2014-06-01 10:47 ` [Buildroot] [PATCH 01/11] toolchain-external: apply kernel headers check to non-custom toolchains Thomas Petazzoni
@ 2014-06-08 16:10   ` Yann E. MORIN
  0 siblings, 0 replies; 27+ messages in thread
From: Yann E. MORIN @ 2014-06-08 16:10 UTC (permalink / raw)
  To: buildroot

Thomas, All,

On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
> Since the introduction of the kernel headers Config.in options, the
> external toolchain logic had a check for custom external toolchains to
> verify that the kernel headers version entered by the user matches the
> one of the toolchain. However, this check was not made for non-custom
> external toolchains (i.e the built-in profiles, such as Linaro,
> CodeSourcery and al.), making the assumption that the Buildroot
> developers will do the right selection.
> 
> However, it is quite nice when bumping external toolchains to have
> this automatic kernel headers version check, to ensure we select the
> appropriate kernel headers version.
> 
> Therefore, this commit makes the kernel headers version check
> applicable to non-custom external toolchains.
> 
> Cc: Yann E. MORIN <yann.morin.1998@free.fr>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Regards,
Yann E. MORIN.

> ---
>  toolchain/toolchain-external/toolchain-external.mk | 8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> index c73cc4a..70781db 100644
> --- a/toolchain/toolchain-external/toolchain-external.mk
> +++ b/toolchain/toolchain-external/toolchain-external.mk
> @@ -466,11 +466,9 @@ define TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS
>  		@echo "External toolchain doesn't support --sysroot. Cannot use." ; \
>  		exit 1 ; \
>  	fi ; \
> -	if [ "$(BR2_TOOLCHAIN_EXTERNAL_CUSTOM)" = "y" ]; then \
> -		$(call check_kernel_headers_version,\
> -			$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)),\
> -			$(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \
> -	fi ; \
> +	$(call check_kernel_headers_version,\
> +		$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)),\
> +		$(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \
>  	if test "$(BR2_arm)" = "y" ; then \
>  		$(call check_arm_abi,\
>  			"$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)",\
> -- 
> 1.9.3
> 

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 02/11] toolchain-external: do not pass TOOLCHAIN_EXTERNAL_CFLAGS for kernel headers check
  2014-06-01 10:47 [Buildroot] [PATCH 00/11] Round of external toolchain updates Thomas Petazzoni
  2014-06-01 10:47 ` [Buildroot] [PATCH 01/11] toolchain-external: apply kernel headers check to non-custom toolchains Thomas Petazzoni
@ 2014-06-01 10:47 ` Thomas Petazzoni
  2014-06-08 16:17   ` Yann E. MORIN
  2014-06-01 10:47 ` [Buildroot] [PATCH 03/11] toolchain-external: support only one Linaro ARM toolchain at a time Thomas Petazzoni
                   ` (8 subsequent siblings)
  10 siblings, 1 reply; 27+ messages in thread
From: Thomas Petazzoni @ 2014-06-01 10:47 UTC (permalink / raw)
  To: buildroot

When getting the sysroot used for the kernel headers version check,
passing TOOLCHAIN_EXTERNAL_CFLAGS causes a problem when used with
multilib toolchains, where only the main sysroot has the header files,
and the other sysroots only have the libraries.

Since the kernel headers version used is normally the same for all
sysroots, this commit solves this problem by removing the
TOOLCHAIN_EXTERNAL_CFLAGS argument when calling
toolchain_find_sysroot, so that it returns the main sysroot, in which
<linux/version.h> can be found for the kernel headers version check.

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 toolchain/toolchain-external/toolchain-external.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index 70781db..6816b3f 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -467,7 +467,7 @@ define TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS
 		exit 1 ; \
 	fi ; \
 	$(call check_kernel_headers_version,\
-		$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)),\
+		$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC)),\
 		$(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \
 	if test "$(BR2_arm)" = "y" ; then \
 		$(call check_arm_abi,\
-- 
1.9.3

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 02/11] toolchain-external: do not pass TOOLCHAIN_EXTERNAL_CFLAGS for kernel headers check
  2014-06-01 10:47 ` [Buildroot] [PATCH 02/11] toolchain-external: do not pass TOOLCHAIN_EXTERNAL_CFLAGS for kernel headers check Thomas Petazzoni
@ 2014-06-08 16:17   ` Yann E. MORIN
  0 siblings, 0 replies; 27+ messages in thread
From: Yann E. MORIN @ 2014-06-08 16:17 UTC (permalink / raw)
  To: buildroot

Thomas, All,

On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
> When getting the sysroot used for the kernel headers version check,
> passing TOOLCHAIN_EXTERNAL_CFLAGS causes a problem when used with
> multilib toolchains, where only the main sysroot has the header files,
> and the other sysroots only have the libraries.
> 
> Since the kernel headers version used is normally the same for all
> sysroots, this commit solves this problem by removing the
> TOOLCHAIN_EXTERNAL_CFLAGS argument when calling
> toolchain_find_sysroot, so that it returns the main sysroot, in which
> <linux/version.h> can be found for the kernel headers version check.
> 
> Cc: Yann E. MORIN <yann.morin.1998@free.fr>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

I don't have a setup handy for testing this, so it's only a reviewed-by.
But I don't expect it to break anything.

Regards,
Yann E. MORIN.

> ---
>  toolchain/toolchain-external/toolchain-external.mk | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> index 70781db..6816b3f 100644
> --- a/toolchain/toolchain-external/toolchain-external.mk
> +++ b/toolchain/toolchain-external/toolchain-external.mk
> @@ -467,7 +467,7 @@ define TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS
>  		exit 1 ; \
>  	fi ; \
>  	$(call check_kernel_headers_version,\
> -		$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)),\
> +		$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC)),\
>  		$(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \
>  	if test "$(BR2_arm)" = "y" ; then \
>  		$(call check_arm_abi,\
> -- 
> 1.9.3
> 

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 03/11] toolchain-external: support only one Linaro ARM toolchain at a time
  2014-06-01 10:47 [Buildroot] [PATCH 00/11] Round of external toolchain updates Thomas Petazzoni
  2014-06-01 10:47 ` [Buildroot] [PATCH 01/11] toolchain-external: apply kernel headers check to non-custom toolchains Thomas Petazzoni
  2014-06-01 10:47 ` [Buildroot] [PATCH 02/11] toolchain-external: do not pass TOOLCHAIN_EXTERNAL_CFLAGS for kernel headers check Thomas Petazzoni
@ 2014-06-01 10:47 ` Thomas Petazzoni
  2014-06-08 16:18   ` Yann E. MORIN
  2014-06-01 10:47 ` [Buildroot] [PATCH 04/11] toolchain-external: support only one Linaro AArch64 " Thomas Petazzoni
                   ` (7 subsequent siblings)
  10 siblings, 1 reply; 27+ messages in thread
From: Thomas Petazzoni @ 2014-06-01 10:47 UTC (permalink / raw)
  To: buildroot

Linaro toolchains are released so frequently (every month) that it
doesn't make much sense to support 3 consecutive versions. So, like we
do for ARM big-endian, let's support only one version at a time.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 toolchain/toolchain-external/Config.in             | 52 ++--------------------
 toolchain/toolchain-external/toolchain-external.mk | 10 +----
 2 files changed, 4 insertions(+), 58 deletions(-)

diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index f4a5ccf..c187116 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -6,8 +6,8 @@ choice
 comment "(e)glibc toolchains only available with shared lib support"
 	depends on BR2_PREFER_STATIC_LIB
 
-config BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02
-	bool "Linaro 2014.02"
+config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
+	bool "Linaro ARM 2014.02"
 	depends on BR2_arm
 	depends on BR2_GCC_TARGET_ARCH = "armv7-a"
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
@@ -28,50 +28,6 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02
 	  with the hard floating point calling convention, and uses
 	  the VFPv3-D16 FPU instructions.
 
-config BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_01
-	bool "Linaro 2014.01"
-	depends on BR2_arm
-	depends on BR2_GCC_TARGET_ARCH = "armv7-a"
-	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
-	depends on BR2_ARM_EABIHF
-	depends on !BR2_PREFER_STATIC_LIB
-	select BR2_TOOLCHAIN_HAS_GCC_BUG_58854 # toolchain generated before fix backport
-	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
-	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
-	select BR2_INSTALL_LIBSTDCPP
-	select BR2_HOSTARCH_NEEDS_IA32_LIBS
-	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1
-	help
-	  Linaro toolchain for the ARM architecture. It uses Linaro
-	  GCC 2014.01 (based on gcc 4.8), Linaro GDB 2013.10 (based on
-	  GDB 7.6), eglibc 2.18, Binutils 2013.11 (based on 2.24). It
-	  generates code that runs on all Cortex-A profile devices,
-	  but tuned for the Cortex-A9. The code generated is Thumb 2,
-	  with the hard floating point calling convention, and uses
-	  the VFPv3-D16 FPU instructions.
-
-config BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_12
-	bool "Linaro 2013.12"
-	depends on BR2_arm
-	depends on BR2_GCC_TARGET_ARCH = "armv7-a"
-	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
-	depends on BR2_ARM_EABIHF
-	depends on !BR2_PREFER_STATIC_LIB
-	select BR2_TOOLCHAIN_HAS_GCC_BUG_58854 # toolchain generated before fix backport
-	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
-	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
-	select BR2_INSTALL_LIBSTDCPP
-	select BR2_HOSTARCH_NEEDS_IA32_LIBS
-	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1
-	help
-	  Linaro toolchain for the ARM architecture. It uses Linaro
-	  GCC 2013.12 (based on gcc 4.8), Linaro GDB 2013.10 (based on
-	  GDB 7.6), eglibc 2.18, Binutils 2013.11 (based on 2.24). It
-	  generates code that runs on all Cortex-A profile devices,
-	  but tuned for the Cortex-A9. The code generated is Thumb 2,
-	  with the hard floating point calling convention, and uses
-	  the VFPv3-D16 FPU instructions.
-
 comment "Linaro toolchains available for Cortex-A + EABIhf"
 	depends on BR2_arm
 	depends on BR2_GCC_TARGET_ARCH != "armv7-a" || !BR2_ARM_EABIHF
@@ -938,9 +894,7 @@ config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX
 
 config BR2_TOOLCHAIN_EXTERNAL_PREFIX
 	string
-	default "arm-linux-gnueabihf"	 if BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02
-	default "arm-linux-gnueabihf"	 if BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_01
-	default "arm-linux-gnueabihf"	 if BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_12
+	default "arm-linux-gnueabihf"	 if BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
 	default "armeb-linux-gnueabihf"	 if BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB
 	default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201203
 	default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201305
diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index 6816b3f..bb81f4c 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -275,15 +275,7 @@ define TOOLCHAIN_EXTERNAL_FIXUP_CMDS
 	mv $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/armv5te/* $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/
 	rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/
 endef
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_12),y)
-TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/13.12/components/toolchain/binaries/
-TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2013.12_linux.tar.xz
-TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_01),y)
-TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.01/components/toolchain/binaries/
-TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2014.01_linux.tar.xz
-TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02),y)
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y)
 TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/
 TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2014.02_linux.tar.xz
 TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
-- 
1.9.3

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 03/11] toolchain-external: support only one Linaro ARM toolchain at a time
  2014-06-01 10:47 ` [Buildroot] [PATCH 03/11] toolchain-external: support only one Linaro ARM toolchain at a time Thomas Petazzoni
@ 2014-06-08 16:18   ` Yann E. MORIN
  0 siblings, 0 replies; 27+ messages in thread
From: Yann E. MORIN @ 2014-06-08 16:18 UTC (permalink / raw)
  To: buildroot

Thomas, All,

On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
> Linaro toolchains are released so frequently (every month) that it
> doesn't make much sense to support 3 consecutive versions. So, like we
> do for ARM big-endian, let's support only one version at a time.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Regards,
Yann E. MORIN.

> ---
>  toolchain/toolchain-external/Config.in             | 52 ++--------------------
>  toolchain/toolchain-external/toolchain-external.mk | 10 +----
>  2 files changed, 4 insertions(+), 58 deletions(-)
> 
> diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
> index f4a5ccf..c187116 100644
> --- a/toolchain/toolchain-external/Config.in
> +++ b/toolchain/toolchain-external/Config.in
> @@ -6,8 +6,8 @@ choice
>  comment "(e)glibc toolchains only available with shared lib support"
>  	depends on BR2_PREFER_STATIC_LIB
>  
> -config BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02
> -	bool "Linaro 2014.02"
> +config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
> +	bool "Linaro ARM 2014.02"
>  	depends on BR2_arm
>  	depends on BR2_GCC_TARGET_ARCH = "armv7-a"
>  	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
> @@ -28,50 +28,6 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02
>  	  with the hard floating point calling convention, and uses
>  	  the VFPv3-D16 FPU instructions.
>  
> -config BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_01
> -	bool "Linaro 2014.01"
> -	depends on BR2_arm
> -	depends on BR2_GCC_TARGET_ARCH = "armv7-a"
> -	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
> -	depends on BR2_ARM_EABIHF
> -	depends on !BR2_PREFER_STATIC_LIB
> -	select BR2_TOOLCHAIN_HAS_GCC_BUG_58854 # toolchain generated before fix backport
> -	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
> -	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
> -	select BR2_INSTALL_LIBSTDCPP
> -	select BR2_HOSTARCH_NEEDS_IA32_LIBS
> -	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1
> -	help
> -	  Linaro toolchain for the ARM architecture. It uses Linaro
> -	  GCC 2014.01 (based on gcc 4.8), Linaro GDB 2013.10 (based on
> -	  GDB 7.6), eglibc 2.18, Binutils 2013.11 (based on 2.24). It
> -	  generates code that runs on all Cortex-A profile devices,
> -	  but tuned for the Cortex-A9. The code generated is Thumb 2,
> -	  with the hard floating point calling convention, and uses
> -	  the VFPv3-D16 FPU instructions.
> -
> -config BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_12
> -	bool "Linaro 2013.12"
> -	depends on BR2_arm
> -	depends on BR2_GCC_TARGET_ARCH = "armv7-a"
> -	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
> -	depends on BR2_ARM_EABIHF
> -	depends on !BR2_PREFER_STATIC_LIB
> -	select BR2_TOOLCHAIN_HAS_GCC_BUG_58854 # toolchain generated before fix backport
> -	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
> -	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
> -	select BR2_INSTALL_LIBSTDCPP
> -	select BR2_HOSTARCH_NEEDS_IA32_LIBS
> -	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1
> -	help
> -	  Linaro toolchain for the ARM architecture. It uses Linaro
> -	  GCC 2013.12 (based on gcc 4.8), Linaro GDB 2013.10 (based on
> -	  GDB 7.6), eglibc 2.18, Binutils 2013.11 (based on 2.24). It
> -	  generates code that runs on all Cortex-A profile devices,
> -	  but tuned for the Cortex-A9. The code generated is Thumb 2,
> -	  with the hard floating point calling convention, and uses
> -	  the VFPv3-D16 FPU instructions.
> -
>  comment "Linaro toolchains available for Cortex-A + EABIhf"
>  	depends on BR2_arm
>  	depends on BR2_GCC_TARGET_ARCH != "armv7-a" || !BR2_ARM_EABIHF
> @@ -938,9 +894,7 @@ config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX
>  
>  config BR2_TOOLCHAIN_EXTERNAL_PREFIX
>  	string
> -	default "arm-linux-gnueabihf"	 if BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02
> -	default "arm-linux-gnueabihf"	 if BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_01
> -	default "arm-linux-gnueabihf"	 if BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_12
> +	default "arm-linux-gnueabihf"	 if BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
>  	default "armeb-linux-gnueabihf"	 if BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB
>  	default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201203
>  	default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201305
> diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> index 6816b3f..bb81f4c 100644
> --- a/toolchain/toolchain-external/toolchain-external.mk
> +++ b/toolchain/toolchain-external/toolchain-external.mk
> @@ -275,15 +275,7 @@ define TOOLCHAIN_EXTERNAL_FIXUP_CMDS
>  	mv $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/armv5te/* $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/
>  	rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/
>  endef
> -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_12),y)
> -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/13.12/components/toolchain/binaries/
> -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2013.12_linux.tar.xz
> -TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
> -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_01),y)
> -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.01/components/toolchain/binaries/
> -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2014.01_linux.tar.xz
> -TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
> -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02),y)
> +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/
>  TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2014.02_linux.tar.xz
>  TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
> -- 
> 1.9.3
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 04/11] toolchain-external: support only one Linaro AArch64 toolchain at a time
  2014-06-01 10:47 [Buildroot] [PATCH 00/11] Round of external toolchain updates Thomas Petazzoni
                   ` (2 preceding siblings ...)
  2014-06-01 10:47 ` [Buildroot] [PATCH 03/11] toolchain-external: support only one Linaro ARM toolchain at a time Thomas Petazzoni
@ 2014-06-01 10:47 ` Thomas Petazzoni
  2014-06-08 16:19   ` Yann E. MORIN
  2014-06-01 10:47 ` [Buildroot] [PATCH 05/11] toolchain-external: bump Linaro ARM to 2014.05 Thomas Petazzoni
                   ` (6 subsequent siblings)
  10 siblings, 1 reply; 27+ messages in thread
From: Thomas Petazzoni @ 2014-06-01 10:47 UTC (permalink / raw)
  To: buildroot

Linaro toolchains are released so frequently (every month) that it
doesn't make much sense to support 3 consecutive versions. So, like we
do for ARM big-endian, let's support only one version at a time.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 toolchain/toolchain-external/Config.in             | 34 ++--------------------
 toolchain/toolchain-external/toolchain-external.mk | 10 +------
 2 files changed, 3 insertions(+), 41 deletions(-)

diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index c187116..abecc6f 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -782,7 +782,7 @@ config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2
 	  Toolchain for the Microblaze architecture, from
 	  http://wiki.xilinx.com/mb-gnu-tools
 
-config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02
+config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64
 	bool "Linaro AArch64 14.02"
 	depends on BR2_aarch64
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
@@ -796,34 +796,6 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02
 	  Toolchain for the AArch64 architecture, from
 	  http://www.linaro.org/engineering/armv8/
 
-config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_01
-	bool "Linaro AArch64 14.01"
-	depends on BR2_aarch64
-	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
-	depends on !BR2_PREFER_STATIC_LIB
-	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
-	select BR2_INSTALL_LIBSTDCPP
-	select BR2_HOSTARCH_NEEDS_IA32_LIBS
-	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
-	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_7
-	help
-	  Toolchain for the AArch64 architecture, from
-	  http://www.linaro.org/engineering/armv8/
-
-config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_12
-	bool "Linaro AArch64 13.12"
-	depends on BR2_aarch64
-	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
-	depends on !BR2_PREFER_STATIC_LIB
-	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
-	select BR2_INSTALL_LIBSTDCPP
-	select BR2_HOSTARCH_NEEDS_IA32_LIBS
-	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
-	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_7
-	help
-	  Toolchain for the AArch64 architecture, from
-	  http://www.linaro.org/engineering/armv8/
-
 config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS
 	bool "Musl toolchain"
 	depends on (BR2_arm && BR2_ARM_EABI) || (BR2_armeb && BR2_ARM_EABI) || \
@@ -901,9 +873,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
 	default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201311
 	default "arm-arago-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A_201109
 	default "arm-arago-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE_201109
-	default "aarch64-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02
-	default "aarch64-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_01
-	default "aarch64-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_12
+	default "aarch64-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64
 	default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3
 	default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2
 	default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_14_3
diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index bb81f4c..1b19089 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -350,15 +350,7 @@ TOOLCHAIN_EXTERNAL_SOURCE = lin32-microblaze-unknown-linux-gnu_14.3_early.tar.xz
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2),y)
 TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/
 TOOLCHAIN_EXTERNAL_SOURCE = microblaze-unknown-linux-gnu.tgz
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_12),y)
-TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/13.12/components/toolchain/binaries/
-TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2013.12-linux.tar.xz
-TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_01),y)
-TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.01/components/toolchain/binaries/
-TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2014.01_linux.tar.xz
-TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02),y)
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y)
 TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/
 TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2014.02_linux.tar.xz
 TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
-- 
1.9.3

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 04/11] toolchain-external: support only one Linaro AArch64 toolchain at a time
  2014-06-01 10:47 ` [Buildroot] [PATCH 04/11] toolchain-external: support only one Linaro AArch64 " Thomas Petazzoni
@ 2014-06-08 16:19   ` Yann E. MORIN
  0 siblings, 0 replies; 27+ messages in thread
From: Yann E. MORIN @ 2014-06-08 16:19 UTC (permalink / raw)
  To: buildroot

Thomas, All,

On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
> Linaro toolchains are released so frequently (every month) that it
> doesn't make much sense to support 3 consecutive versions. So, like we
> do for ARM big-endian, let's support only one version at a time.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Regards,
Yann E. MORIN.

> ---
>  toolchain/toolchain-external/Config.in             | 34 ++--------------------
>  toolchain/toolchain-external/toolchain-external.mk | 10 +------
>  2 files changed, 3 insertions(+), 41 deletions(-)
> 
> diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
> index c187116..abecc6f 100644
> --- a/toolchain/toolchain-external/Config.in
> +++ b/toolchain/toolchain-external/Config.in
> @@ -782,7 +782,7 @@ config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2
>  	  Toolchain for the Microblaze architecture, from
>  	  http://wiki.xilinx.com/mb-gnu-tools
>  
> -config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02
> +config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64
>  	bool "Linaro AArch64 14.02"
>  	depends on BR2_aarch64
>  	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
> @@ -796,34 +796,6 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02
>  	  Toolchain for the AArch64 architecture, from
>  	  http://www.linaro.org/engineering/armv8/
>  
> -config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_01
> -	bool "Linaro AArch64 14.01"
> -	depends on BR2_aarch64
> -	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
> -	depends on !BR2_PREFER_STATIC_LIB
> -	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
> -	select BR2_INSTALL_LIBSTDCPP
> -	select BR2_HOSTARCH_NEEDS_IA32_LIBS
> -	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
> -	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_7
> -	help
> -	  Toolchain for the AArch64 architecture, from
> -	  http://www.linaro.org/engineering/armv8/
> -
> -config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_12
> -	bool "Linaro AArch64 13.12"
> -	depends on BR2_aarch64
> -	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
> -	depends on !BR2_PREFER_STATIC_LIB
> -	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
> -	select BR2_INSTALL_LIBSTDCPP
> -	select BR2_HOSTARCH_NEEDS_IA32_LIBS
> -	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
> -	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_7
> -	help
> -	  Toolchain for the AArch64 architecture, from
> -	  http://www.linaro.org/engineering/armv8/
> -
>  config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS
>  	bool "Musl toolchain"
>  	depends on (BR2_arm && BR2_ARM_EABI) || (BR2_armeb && BR2_ARM_EABI) || \
> @@ -901,9 +873,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
>  	default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201311
>  	default "arm-arago-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A_201109
>  	default "arm-arago-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE_201109
> -	default "aarch64-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02
> -	default "aarch64-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_01
> -	default "aarch64-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_12
> +	default "aarch64-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64
>  	default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3
>  	default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2
>  	default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_14_3
> diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> index bb81f4c..1b19089 100644
> --- a/toolchain/toolchain-external/toolchain-external.mk
> +++ b/toolchain/toolchain-external/toolchain-external.mk
> @@ -350,15 +350,7 @@ TOOLCHAIN_EXTERNAL_SOURCE = lin32-microblaze-unknown-linux-gnu_14.3_early.tar.xz
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/
>  TOOLCHAIN_EXTERNAL_SOURCE = microblaze-unknown-linux-gnu.tgz
> -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_12),y)
> -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/13.12/components/toolchain/binaries/
> -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2013.12-linux.tar.xz
> -TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
> -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_01),y)
> -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.01/components/toolchain/binaries/
> -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2014.01_linux.tar.xz
> -TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
> -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02),y)
> +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/
>  TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2014.02_linux.tar.xz
>  TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
> -- 
> 1.9.3
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 05/11] toolchain-external: bump Linaro ARM to 2014.05
  2014-06-01 10:47 [Buildroot] [PATCH 00/11] Round of external toolchain updates Thomas Petazzoni
                   ` (3 preceding siblings ...)
  2014-06-01 10:47 ` [Buildroot] [PATCH 04/11] toolchain-external: support only one Linaro AArch64 " Thomas Petazzoni
@ 2014-06-01 10:47 ` Thomas Petazzoni
  2014-06-08 16:30   ` Yann E. MORIN
  2014-06-01 10:47 ` [Buildroot] [PATCH 06/11] toolchain-external: bump Linaro ARMeb toolchain to 2014.04 Thomas Petazzoni
                   ` (5 subsequent siblings)
  10 siblings, 1 reply; 27+ messages in thread
From: Thomas Petazzoni @ 2014-06-01 10:47 UTC (permalink / raw)
  To: buildroot

The major changes are: switch to gcc 4.9 instead of 4.8, and switch to
glibc 2.19 instead of glibc 2.18.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 toolchain/toolchain-external/Config.in             | 7 +++----
 toolchain/toolchain-external/toolchain-external.mk | 4 ++--
 2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index abecc6f..54a94f8 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -7,13 +7,12 @@ comment "(e)glibc toolchains only available with shared lib support"
 	depends on BR2_PREFER_STATIC_LIB
 
 config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
-	bool "Linaro ARM 2014.02"
+	bool "Linaro ARM 2014.05"
 	depends on BR2_arm
 	depends on BR2_GCC_TARGET_ARCH = "armv7-a"
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
 	depends on BR2_ARM_EABIHF
 	depends on !BR2_PREFER_STATIC_LIB
-	select BR2_TOOLCHAIN_HAS_GCC_BUG_58854 # toolchain generated before fix backport
 	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
 	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
 	select BR2_INSTALL_LIBSTDCPP
@@ -21,8 +20,8 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
 	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1
 	help
 	  Linaro toolchain for the ARM architecture. It uses Linaro
-	  GCC 2014.02 (based on gcc 4.8), Linaro GDB 2013.10 (based on
-	  GDB 7.6), eglibc 2.18, Binutils 2014.02 (based on 2.24). It
+	  GCC 2014.05 (based on gcc 4.9), Linaro GDB 2014.05 (based on
+	  GDB 7.6), eglibc 2.19, Binutils 2014.05 (based on 2.24). It
 	  generates code that runs on all Cortex-A profile devices,
 	  but tuned for the Cortex-A9. The code generated is Thumb 2,
 	  with the hard floating point calling convention, and uses
diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index 1b19089..ba1690b 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -276,8 +276,8 @@ define TOOLCHAIN_EXTERNAL_FIXUP_CMDS
 	rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/
 endef
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y)
-TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/
-TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2014.02_linux.tar.xz
+TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/binaries/
+TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux.tar.xz
 TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y)
 TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/
-- 
1.9.3

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 05/11] toolchain-external: bump Linaro ARM to 2014.05
  2014-06-01 10:47 ` [Buildroot] [PATCH 05/11] toolchain-external: bump Linaro ARM to 2014.05 Thomas Petazzoni
@ 2014-06-08 16:30   ` Yann E. MORIN
  0 siblings, 0 replies; 27+ messages in thread
From: Yann E. MORIN @ 2014-06-08 16:30 UTC (permalink / raw)
  To: buildroot

Thomas, All,

On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
> The major changes are: switch to gcc 4.9 instead of 4.8, and switch to
> glibc 2.19 instead of glibc 2.18.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Regards,
Yann E. MORIN.

> ---
>  toolchain/toolchain-external/Config.in             | 7 +++----
>  toolchain/toolchain-external/toolchain-external.mk | 4 ++--
>  2 files changed, 5 insertions(+), 6 deletions(-)
> 
> diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
> index abecc6f..54a94f8 100644
> --- a/toolchain/toolchain-external/Config.in
> +++ b/toolchain/toolchain-external/Config.in
> @@ -7,13 +7,12 @@ comment "(e)glibc toolchains only available with shared lib support"
>  	depends on BR2_PREFER_STATIC_LIB
>  
>  config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
> -	bool "Linaro ARM 2014.02"
> +	bool "Linaro ARM 2014.05"
>  	depends on BR2_arm
>  	depends on BR2_GCC_TARGET_ARCH = "armv7-a"
>  	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
>  	depends on BR2_ARM_EABIHF
>  	depends on !BR2_PREFER_STATIC_LIB
> -	select BR2_TOOLCHAIN_HAS_GCC_BUG_58854 # toolchain generated before fix backport
>  	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
>  	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
>  	select BR2_INSTALL_LIBSTDCPP
> @@ -21,8 +20,8 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM
>  	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1
>  	help
>  	  Linaro toolchain for the ARM architecture. It uses Linaro
> -	  GCC 2014.02 (based on gcc 4.8), Linaro GDB 2013.10 (based on
> -	  GDB 7.6), eglibc 2.18, Binutils 2014.02 (based on 2.24). It
> +	  GCC 2014.05 (based on gcc 4.9), Linaro GDB 2014.05 (based on
> +	  GDB 7.6), eglibc 2.19, Binutils 2014.05 (based on 2.24). It
>  	  generates code that runs on all Cortex-A profile devices,
>  	  but tuned for the Cortex-A9. The code generated is Thumb 2,
>  	  with the hard floating point calling convention, and uses
> diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> index 1b19089..ba1690b 100644
> --- a/toolchain/toolchain-external/toolchain-external.mk
> +++ b/toolchain/toolchain-external/toolchain-external.mk
> @@ -276,8 +276,8 @@ define TOOLCHAIN_EXTERNAL_FIXUP_CMDS
>  	rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/
>  endef
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y)
> -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/
> -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2014.02_linux.tar.xz
> +TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/binaries/
> +TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux.tar.xz
>  TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/
> -- 
> 1.9.3
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 06/11] toolchain-external: bump Linaro ARMeb toolchain to 2014.04
  2014-06-01 10:47 [Buildroot] [PATCH 00/11] Round of external toolchain updates Thomas Petazzoni
                   ` (4 preceding siblings ...)
  2014-06-01 10:47 ` [Buildroot] [PATCH 05/11] toolchain-external: bump Linaro ARM to 2014.05 Thomas Petazzoni
@ 2014-06-01 10:47 ` Thomas Petazzoni
  2014-06-08 16:37   ` Yann E. MORIN
  2014-06-01 10:47 ` [Buildroot] [PATCH 07/11] toolchain-external: bump Linaro AArch64 toolchain to 2014.05 Thomas Petazzoni
                   ` (4 subsequent siblings)
  10 siblings, 1 reply; 27+ messages in thread
From: Thomas Petazzoni @ 2014-06-01 10:47 UTC (permalink / raw)
  To: buildroot

For some reason, there is no ARMeb toolchain available in the 2014.05
Linaro release.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 toolchain/toolchain-external/Config.in             | 6 +++---
 toolchain/toolchain-external/toolchain-external.mk | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index 54a94f8..dcdd383 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -33,7 +33,7 @@ comment "Linaro toolchains available for Cortex-A + EABIhf"
 	depends on !BR2_PREFER_STATIC_LIB
 
 config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB
-	bool "Linaro armeb 2014.02"
+	bool "Linaro armeb 2014.04"
 	depends on BR2_armeb
 	depends on BR2_GCC_TARGET_ARCH = "armv7-a"
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
@@ -46,8 +46,8 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB
 	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1
 	help
 	  Linaro toolchain for the ARM big endian architecture. It
-	  uses Linaro GCC 2014.01 (based on gcc 4.8), Linaro GDB
-	  2013.10 (based on GDB 7.6), eglibc 2.18, Binutils 2013.11
+	  uses Linaro GCC 2014.04 (based on gcc 4.8), Linaro GDB
+	  2014.04 (based on GDB 7.6), eglibc 2.19, Binutils 2014.04
 	  (based on 2.24). It generates code that runs on all Cortex-A
 	  profile devices, but tuned for the Cortex-A9. The code
 	  generated is Thumb 2, with the hard floating point calling
diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index ba1690b..8185c89 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -280,8 +280,8 @@ TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/
 TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux.tar.xz
 TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y)
-TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/
-TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.8-2014.02_linux.tar.xz
+TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.04/components/toolchain/binaries/
+TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.8-2014.04_linux.tar.xz
 TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209),y)
 TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/
-- 
1.9.3

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 06/11] toolchain-external: bump Linaro ARMeb toolchain to 2014.04
  2014-06-01 10:47 ` [Buildroot] [PATCH 06/11] toolchain-external: bump Linaro ARMeb toolchain to 2014.04 Thomas Petazzoni
@ 2014-06-08 16:37   ` Yann E. MORIN
  0 siblings, 0 replies; 27+ messages in thread
From: Yann E. MORIN @ 2014-06-08 16:37 UTC (permalink / raw)
  To: buildroot

Thomas, All,

On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
> For some reason, there is no ARMeb toolchain available in the 2014.05
> Linaro release.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Regards,
Yann E. MORIN.

> ---
>  toolchain/toolchain-external/Config.in             | 6 +++---
>  toolchain/toolchain-external/toolchain-external.mk | 4 ++--
>  2 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
> index 54a94f8..dcdd383 100644
> --- a/toolchain/toolchain-external/Config.in
> +++ b/toolchain/toolchain-external/Config.in
> @@ -33,7 +33,7 @@ comment "Linaro toolchains available for Cortex-A + EABIhf"
>  	depends on !BR2_PREFER_STATIC_LIB
>  
>  config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB
> -	bool "Linaro armeb 2014.02"
> +	bool "Linaro armeb 2014.04"
>  	depends on BR2_armeb
>  	depends on BR2_GCC_TARGET_ARCH = "armv7-a"
>  	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
> @@ -46,8 +46,8 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB
>  	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1
>  	help
>  	  Linaro toolchain for the ARM big endian architecture. It
> -	  uses Linaro GCC 2014.01 (based on gcc 4.8), Linaro GDB
> -	  2013.10 (based on GDB 7.6), eglibc 2.18, Binutils 2013.11
> +	  uses Linaro GCC 2014.04 (based on gcc 4.8), Linaro GDB
> +	  2014.04 (based on GDB 7.6), eglibc 2.19, Binutils 2014.04
>  	  (based on 2.24). It generates code that runs on all Cortex-A
>  	  profile devices, but tuned for the Cortex-A9. The code
>  	  generated is Thumb 2, with the hard floating point calling
> diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> index ba1690b..8185c89 100644
> --- a/toolchain/toolchain-external/toolchain-external.mk
> +++ b/toolchain/toolchain-external/toolchain-external.mk
> @@ -280,8 +280,8 @@ TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/
>  TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux.tar.xz
>  TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y)
> -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/
> -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.8-2014.02_linux.tar.xz
> +TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.04/components/toolchain/binaries/
> +TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.8-2014.04_linux.tar.xz
>  TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/
> -- 
> 1.9.3
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 07/11] toolchain-external: bump Linaro AArch64 toolchain to 2014.05
  2014-06-01 10:47 [Buildroot] [PATCH 00/11] Round of external toolchain updates Thomas Petazzoni
                   ` (5 preceding siblings ...)
  2014-06-01 10:47 ` [Buildroot] [PATCH 06/11] toolchain-external: bump Linaro ARMeb toolchain to 2014.04 Thomas Petazzoni
@ 2014-06-01 10:47 ` Thomas Petazzoni
  2014-06-08 16:39   ` Yann E. MORIN
  2014-06-01 10:47 ` [Buildroot] [PATCH 08/11] toolchain-external: bump musl external toolchains to 1.1.1 Thomas Petazzoni
                   ` (3 subsequent siblings)
  10 siblings, 1 reply; 27+ messages in thread
From: Thomas Petazzoni @ 2014-06-01 10:47 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 toolchain/toolchain-external/Config.in             | 2 +-
 toolchain/toolchain-external/toolchain-external.mk | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index dcdd383..8fca01a 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -782,7 +782,7 @@ config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2
 	  http://wiki.xilinx.com/mb-gnu-tools
 
 config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64
-	bool "Linaro AArch64 14.02"
+	bool "Linaro AArch64 14.05"
 	depends on BR2_aarch64
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
 	depends on !BR2_PREFER_STATIC_LIB
diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index 8185c89..a6c4061 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -351,8 +351,8 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2),y)
 TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/
 TOOLCHAIN_EXTERNAL_SOURCE = microblaze-unknown-linux-gnu.tgz
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y)
-TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/
-TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2014.02_linux.tar.xz
+TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/binaries/
+TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.05_linux.tar.xz
 TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y)
 TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-1.0.0/
-- 
1.9.3

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 07/11] toolchain-external: bump Linaro AArch64 toolchain to 2014.05
  2014-06-01 10:47 ` [Buildroot] [PATCH 07/11] toolchain-external: bump Linaro AArch64 toolchain to 2014.05 Thomas Petazzoni
@ 2014-06-08 16:39   ` Yann E. MORIN
  0 siblings, 0 replies; 27+ messages in thread
From: Yann E. MORIN @ 2014-06-08 16:39 UTC (permalink / raw)
  To: buildroot

Thomas, All,

On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Regards,
Yann E. MORIN.

> ---
>  toolchain/toolchain-external/Config.in             | 2 +-
>  toolchain/toolchain-external/toolchain-external.mk | 4 ++--
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
> index dcdd383..8fca01a 100644
> --- a/toolchain/toolchain-external/Config.in
> +++ b/toolchain/toolchain-external/Config.in
> @@ -782,7 +782,7 @@ config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2
>  	  http://wiki.xilinx.com/mb-gnu-tools
>  
>  config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64
> -	bool "Linaro AArch64 14.02"
> +	bool "Linaro AArch64 14.05"
>  	depends on BR2_aarch64
>  	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
>  	depends on !BR2_PREFER_STATIC_LIB
> diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> index 8185c89..a6c4061 100644
> --- a/toolchain/toolchain-external/toolchain-external.mk
> +++ b/toolchain/toolchain-external/toolchain-external.mk
> @@ -351,8 +351,8 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/
>  TOOLCHAIN_EXTERNAL_SOURCE = microblaze-unknown-linux-gnu.tgz
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y)
> -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/
> -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2014.02_linux.tar.xz
> +TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/binaries/
> +TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.05_linux.tar.xz
>  TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y)
>  TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-1.0.0/
> -- 
> 1.9.3
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 08/11] toolchain-external: bump musl external toolchains to 1.1.1
  2014-06-01 10:47 [Buildroot] [PATCH 00/11] Round of external toolchain updates Thomas Petazzoni
                   ` (6 preceding siblings ...)
  2014-06-01 10:47 ` [Buildroot] [PATCH 07/11] toolchain-external: bump Linaro AArch64 toolchain to 2014.05 Thomas Petazzoni
@ 2014-06-01 10:47 ` Thomas Petazzoni
  2014-06-01 10:58   ` Baruch Siach
  2014-06-13 12:49   ` Peter Korsgaard
  2014-06-01 10:47 ` [Buildroot] [PATCH 09/11] toolchain-external: add CodeSourcery MIPS 2014.05, remove 2012.09 Thomas Petazzoni
                   ` (2 subsequent siblings)
  10 siblings, 2 replies; 27+ messages in thread
From: Thomas Petazzoni @ 2014-06-01 10:47 UTC (permalink / raw)
  To: buildroot

And while we're at it, factorize the definition of the musl version,
since it's common to the definition of the tarball names for the
various supported architectures.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 toolchain/toolchain-external/Config.in             |  2 +-
 toolchain/toolchain-external/toolchain-external.mk | 23 +++++++++++-----------
 2 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index 8fca01a..527ff04 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -804,7 +804,7 @@ config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS
 	select BR2_TOOLCHAIN_EXTERNAL_MUSL
 	select BR2_INSTALL_LIBSTDCPP
 	select BR2_HOSTARCH_NEEDS_IA32_LIBS
-	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12
 	help
 	  Toolchain based on the Musl C library, provided by the
 	  musl-cross project. It uses gcc 4.8.2, binutils 2.24 and
diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index a6c4061..47273d3 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -355,31 +355,32 @@ TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/
 TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.05_linux.tar.xz
 TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y)
-TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-1.0.0/
+TOOLCHAIN_EXTERNAL_VERSION = 1.1.1
+TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-$(TOOLCHAIN_EXTERNAL_VERSION)/
 ifeq ($(BR2_arm),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-1.0.0.tar.xz
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
 else ifeq ($(BR2_armeb),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-1.0.0.tar.xz
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
 else ifeq ($(BR2_i386),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-1.0.0.tar.xz
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
 else ifeq ($(BR2_microblazebe),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-microblaze-linux-musl-1.0.0.tar.xz
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-microblaze-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
 else ifeq ($(BR2_mips),y)
 ifeq ($(BR2_SOFT_FLOAT),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-sf-linux-musl-1.0.0.tar.xz
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-sf-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
 else
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-1.0.0.tar.xz
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
 endif # BR2_SOFT_FLOAT
 else ifeq ($(BR2_mipsel),y)
 ifeq ($(BR2_SOFT_FLOAT),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-sf-linux-musl-1.0.0.tar.xz
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-sf-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
 else
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-1.0.0.tar.xz
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
 endif # BR2_SOFT_FLOAT
 else ifeq ($(BR2_powerpc),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-1.0.0.tar.xz
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
 else ifeq ($(BR2_x86_64),y)
-TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-1.0.0.tar.xz
+TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
 endif
 else
 # Custom toolchain
-- 
1.9.3

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 08/11] toolchain-external: bump musl external toolchains to 1.1.1
  2014-06-01 10:47 ` [Buildroot] [PATCH 08/11] toolchain-external: bump musl external toolchains to 1.1.1 Thomas Petazzoni
@ 2014-06-01 10:58   ` Baruch Siach
  2014-06-01 11:02     ` Thomas Petazzoni
  2014-06-13 12:49   ` Peter Korsgaard
  1 sibling, 1 reply; 27+ messages in thread
From: Baruch Siach @ 2014-06-01 10:58 UTC (permalink / raw)
  To: buildroot

Hi Thomas,

On Sun, Jun 01, 2014 at 12:47:45PM +0200, Thomas Petazzoni wrote:
> And while we're at it, factorize the definition of the musl version,
> since it's common to the definition of the tarball names for the
> various supported architectures.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
>  toolchain/toolchain-external/Config.in             |  2 +-
>  toolchain/toolchain-external/toolchain-external.mk | 23 +++++++++++-----------
>  2 files changed, 13 insertions(+), 12 deletions(-)
> 
> diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
> index 8fca01a..527ff04 100644
> --- a/toolchain/toolchain-external/Config.in
> +++ b/toolchain/toolchain-external/Config.in
> @@ -804,7 +804,7 @@ config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS
>  	select BR2_TOOLCHAIN_EXTERNAL_MUSL
>  	select BR2_INSTALL_LIBSTDCPP
>  	select BR2_HOSTARCH_NEEDS_IA32_LIBS
> -	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2
> +	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12
>  	help
>  	  Toolchain based on the Musl C library, provided by the
>  	  musl-cross project. It uses gcc 4.8.2, binutils 2.24 and
> diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> index a6c4061..47273d3 100644
> --- a/toolchain/toolchain-external/toolchain-external.mk
> +++ b/toolchain/toolchain-external/toolchain-external.mk
> @@ -355,31 +355,32 @@ TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/
>  TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.05_linux.tar.xz
>  TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y)
> -TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-1.0.0/
> +TOOLCHAIN_EXTERNAL_VERSION = 1.1.1

This name sounds too generic. Other external toolchains are unlikely to use 
the same version string. Maybe MUSL_TOOLCHAIN_EXTERNAL_VERSION?

baruch

> +TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-$(TOOLCHAIN_EXTERNAL_VERSION)/
>  ifeq ($(BR2_arm),y)
> -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-1.0.0.tar.xz
> +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
>  else ifeq ($(BR2_armeb),y)
> -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-1.0.0.tar.xz
> +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
>  else ifeq ($(BR2_i386),y)
> -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-1.0.0.tar.xz
> +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
>  else ifeq ($(BR2_microblazebe),y)
> -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-microblaze-linux-musl-1.0.0.tar.xz
> +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-microblaze-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
>  else ifeq ($(BR2_mips),y)
>  ifeq ($(BR2_SOFT_FLOAT),y)
> -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-sf-linux-musl-1.0.0.tar.xz
> +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-sf-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
>  else
> -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-1.0.0.tar.xz
> +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
>  endif # BR2_SOFT_FLOAT
>  else ifeq ($(BR2_mipsel),y)
>  ifeq ($(BR2_SOFT_FLOAT),y)
> -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-sf-linux-musl-1.0.0.tar.xz
> +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-sf-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
>  else
> -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-1.0.0.tar.xz
> +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
>  endif # BR2_SOFT_FLOAT
>  else ifeq ($(BR2_powerpc),y)
> -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-1.0.0.tar.xz
> +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
>  else ifeq ($(BR2_x86_64),y)
> -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-1.0.0.tar.xz
> +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
>  endif
>  else
>  # Custom toolchain
> -- 
> 1.9.3
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 08/11] toolchain-external: bump musl external toolchains to 1.1.1
  2014-06-01 10:58   ` Baruch Siach
@ 2014-06-01 11:02     ` Thomas Petazzoni
  0 siblings, 0 replies; 27+ messages in thread
From: Thomas Petazzoni @ 2014-06-01 11:02 UTC (permalink / raw)
  To: buildroot

Dear Baruch Siach,

On Sun, 1 Jun 2014 13:58:59 +0300, Baruch Siach wrote:

> > diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> > index a6c4061..47273d3 100644
> > --- a/toolchain/toolchain-external/toolchain-external.mk
> > +++ b/toolchain/toolchain-external/toolchain-external.mk
> > @@ -355,31 +355,32 @@ TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/
> >  TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.05_linux.tar.xz
> >  TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
> >  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y)
> > -TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-1.0.0/
> > +TOOLCHAIN_EXTERNAL_VERSION = 1.1.1
> 
> This name sounds too generic. Other external toolchains are unlikely to use 
> the same version string. Maybe MUSL_TOOLCHAIN_EXTERNAL_VERSION?

I believe it's OK: other toolchains could also define
TOOLCHAIN_EXTERNAL_VERSION (I'm actually thinking of sending patches to
do this). It's exactly like the choice between gcc versions in the gcc
package: we assign a different GCC_VERSION value in each case. That's
the same thing here: we have the choice between multiple toolchains and
toolchain versions, so it makes sense to have
TOOLCHAIN_EXTERNAL_VERSION defined to whatever the version of the
currently selected toolchain is.

Best regards,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 08/11] toolchain-external: bump musl external toolchains to 1.1.1
  2014-06-01 10:47 ` [Buildroot] [PATCH 08/11] toolchain-external: bump musl external toolchains to 1.1.1 Thomas Petazzoni
  2014-06-01 10:58   ` Baruch Siach
@ 2014-06-13 12:49   ` Peter Korsgaard
  1 sibling, 0 replies; 27+ messages in thread
From: Peter Korsgaard @ 2014-06-13 12:49 UTC (permalink / raw)
  To: buildroot

>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:

 > And while we're at it, factorize the definition of the musl version,
 > since it's common to the definition of the tarball names for the
 > various supported architectures.

 > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 > ---
 >  toolchain/toolchain-external/Config.in             |  2 +-
 >  toolchain/toolchain-external/toolchain-external.mk | 23 +++++++++++-----------
 >  2 files changed, 13 insertions(+), 12 deletions(-)

 > diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
 > index 8fca01a..527ff04 100644
 > --- a/toolchain/toolchain-external/Config.in
 > +++ b/toolchain/toolchain-external/Config.in
 > @@ -804,7 +804,7 @@ config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS
 >  	select BR2_TOOLCHAIN_EXTERNAL_MUSL
 >  	select BR2_INSTALL_LIBSTDCPP
 >  	select BR2_HOSTARCH_NEEDS_IA32_LIBS
 > -	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2
 > +	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12
 >  	help
 >  	  Toolchain based on the Musl C library, provided by the
 >  	  musl-cross project. It uses gcc 4.8.2, binutils 2.24 and

This is no longer valid. Committed with this fixed up, thanks.

-- 
Bye, Peter Korsgaard

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 09/11] toolchain-external: add CodeSourcery MIPS 2014.05, remove 2012.09
  2014-06-01 10:47 [Buildroot] [PATCH 00/11] Round of external toolchain updates Thomas Petazzoni
                   ` (7 preceding siblings ...)
  2014-06-01 10:47 ` [Buildroot] [PATCH 08/11] toolchain-external: bump musl external toolchains to 1.1.1 Thomas Petazzoni
@ 2014-06-01 10:47 ` Thomas Petazzoni
  2014-06-08 16:44   ` Yann E. MORIN
  2014-06-01 10:47 ` [Buildroot] [PATCH 10/11] toolchain-external: add CodeSourcery PowerPC 2012.03 Thomas Petazzoni
  2014-06-01 10:47 ` [Buildroot] [PATCH 11/11] toolchain-external: add ADI Blackfin 2014R1 toolchain, remove 2012R1 Thomas Petazzoni
  10 siblings, 1 reply; 27+ messages in thread
From: Thomas Petazzoni @ 2014-06-01 10:47 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 toolchain/toolchain-external/Config.in             | 40 +++++++++++-----------
 toolchain/toolchain-external/toolchain-external.mk |  6 ++--
 2 files changed, 23 insertions(+), 23 deletions(-)

diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index 527ff04..3331b69 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -190,8 +190,8 @@ config BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE_201109
 
 	  This toolchain uses software-floating point.
 
-config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311
-	bool "Sourcery CodeBench MIPS 2013.11"
+config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405
+	bool "Sourcery CodeBench MIPS 2014.05"
 	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
 	depends on !BR2_MIPS_NABI32
@@ -200,12 +200,12 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311
 	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
 	select BR2_INSTALL_LIBSTDCPP
 	select BR2_HOSTARCH_NEEDS_IA32_LIBS
-	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_11
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13
 	help
 	  Sourcery CodeBench toolchain for the MIPS architecture, from
-	  Mentor Graphics. It uses gcc 4.8.1, binutils 2.23.52, glibc
-	  2.18, uClibc 0.9.30 and gdb 7.6.50, kernel headers
-	  3.11. It has support for the following variants:
+	  Mentor Graphics. It uses gcc 4.8.3, binutils 2.24.51, glibc
+	  2.18, uClibc 0.9.30 and gdb 7.7.50, kernel headers
+	  3.13. It has support for the following variants:
 	    - MIPS32 O32 big endian glibc
 	      Select a MIPS generic core
 	      Disable BR2_SOFT_FLOAT
@@ -259,8 +259,8 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311
 	    - MIPS32 little endian soft float uclibc
 	      Not usable in Buildroot yet.
 
-config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305
-	bool "Sourcery CodeBench MIPS 2013.05"
+config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311
+	bool "Sourcery CodeBench MIPS 2013.11"
 	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
 	depends on !BR2_MIPS_NABI32
@@ -269,12 +269,12 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305
 	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
 	select BR2_INSTALL_LIBSTDCPP
 	select BR2_HOSTARCH_NEEDS_IA32_LIBS
-	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_8
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_11
 	help
 	  Sourcery CodeBench toolchain for the MIPS architecture, from
-	  Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52, glibc
-	  2.17, uClibc 0.9.30 and gdb 7.4.50, kernel headers
-	  3.8.2. It has support for the following variants:
+	  Mentor Graphics. It uses gcc 4.8.1, binutils 2.23.52, glibc
+	  2.18, uClibc 0.9.30 and gdb 7.6.50, kernel headers
+	  3.11. It has support for the following variants:
 	    - MIPS32 O32 big endian glibc
 	      Select a MIPS generic core
 	      Disable BR2_SOFT_FLOAT
@@ -328,9 +328,9 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305
 	    - MIPS32 little endian soft float uclibc
 	      Not usable in Buildroot yet.
 
-config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209
-	bool "Sourcery CodeBench MIPS 2012.09"
-	depends on BR2_mips || BR2_mipsel
+config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305
+	bool "Sourcery CodeBench MIPS 2013.05"
+	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
 	depends on !BR2_MIPS_NABI32
 	depends on !BR2_PREFER_STATIC_LIB
@@ -338,12 +338,12 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209
 	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
 	select BR2_INSTALL_LIBSTDCPP
 	select BR2_HOSTARCH_NEEDS_IA32_LIBS
-	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_8
 	help
 	  Sourcery CodeBench toolchain for the MIPS architecture, from
-	  Mentor Graphics. It uses gcc 4.7.2, binutils 2.23.51, glibc
-	  2.16, uClibc 0.9.30 and gdb 7.4.50, kernel headers
-	  3.5.4. It has support for the following variants:
+	  Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52, glibc
+	  2.17, uClibc 0.9.30 and gdb 7.4.50, kernel headers
+	  3.8.2. It has support for the following variants:
 	    - MIPS32 O32 big endian glibc
 	      Select a MIPS generic core
 	      Disable BR2_SOFT_FLOAT
@@ -877,9 +877,9 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
 	default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2
 	default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_14_3
 	default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2
-	default "mips-linux-gnu"         if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209
 	default "mips-linux-gnu"         if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305
 	default "mips-linux-gnu"         if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311
+	default "mips-linux-gnu"         if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405
 	default "nios2-linux-gnu"        if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305
 	default "powerpc-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
 	default "powerpc-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103
diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index 47273d3..50e8dca 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -283,15 +283,15 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y)
 TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.04/components/toolchain/binaries/
 TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.8-2014.04_linux.tar.xz
 TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209),y)
-TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/
-TOOLCHAIN_EXTERNAL_SOURCE = mips-2012.09-99-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305),y)
 TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/
 TOOLCHAIN_EXTERNAL_SOURCE = mips-2013.05-66-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311),y)
 TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/
 TOOLCHAIN_EXTERNAL_SOURCE = mips-2013.11-36-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405),y)
+TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/
+TOOLCHAIN_EXTERNAL_SOURCE = mips-2014.05-27-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305),y)
 TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu/
 TOOLCHAIN_EXTERNAL_SOURCE = sourceryg++-2013.05-43-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
-- 
1.9.3

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 09/11] toolchain-external: add CodeSourcery MIPS 2014.05, remove 2012.09
  2014-06-01 10:47 ` [Buildroot] [PATCH 09/11] toolchain-external: add CodeSourcery MIPS 2014.05, remove 2012.09 Thomas Petazzoni
@ 2014-06-08 16:44   ` Yann E. MORIN
  0 siblings, 0 replies; 27+ messages in thread
From: Yann E. MORIN @ 2014-06-08 16:44 UTC (permalink / raw)
  To: buildroot

Thomas, All,

On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Sometimes, git-diff is too smart. It detects multiple small adds/removes
instead of one big remove and one big add. More complex to review... :-/

Regards,
Yann E. MORIN.

> ---
>  toolchain/toolchain-external/Config.in             | 40 +++++++++++-----------
>  toolchain/toolchain-external/toolchain-external.mk |  6 ++--
>  2 files changed, 23 insertions(+), 23 deletions(-)
> 
> diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
> index 527ff04..3331b69 100644
> --- a/toolchain/toolchain-external/Config.in
> +++ b/toolchain/toolchain-external/Config.in
> @@ -190,8 +190,8 @@ config BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE_201109
>  
>  	  This toolchain uses software-floating point.
>  
> -config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311
> -	bool "Sourcery CodeBench MIPS 2013.11"
> +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405
> +	bool "Sourcery CodeBench MIPS 2014.05"
>  	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
>  	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
>  	depends on !BR2_MIPS_NABI32
> @@ -200,12 +200,12 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311
>  	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
>  	select BR2_INSTALL_LIBSTDCPP
>  	select BR2_HOSTARCH_NEEDS_IA32_LIBS
> -	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_11
> +	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13
>  	help
>  	  Sourcery CodeBench toolchain for the MIPS architecture, from
> -	  Mentor Graphics. It uses gcc 4.8.1, binutils 2.23.52, glibc
> -	  2.18, uClibc 0.9.30 and gdb 7.6.50, kernel headers
> -	  3.11. It has support for the following variants:
> +	  Mentor Graphics. It uses gcc 4.8.3, binutils 2.24.51, glibc
> +	  2.18, uClibc 0.9.30 and gdb 7.7.50, kernel headers
> +	  3.13. It has support for the following variants:
>  	    - MIPS32 O32 big endian glibc
>  	      Select a MIPS generic core
>  	      Disable BR2_SOFT_FLOAT
> @@ -259,8 +259,8 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311
>  	    - MIPS32 little endian soft float uclibc
>  	      Not usable in Buildroot yet.
>  
> -config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305
> -	bool "Sourcery CodeBench MIPS 2013.05"
> +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311
> +	bool "Sourcery CodeBench MIPS 2013.11"
>  	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
>  	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
>  	depends on !BR2_MIPS_NABI32
> @@ -269,12 +269,12 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305
>  	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
>  	select BR2_INSTALL_LIBSTDCPP
>  	select BR2_HOSTARCH_NEEDS_IA32_LIBS
> -	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_8
> +	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_11
>  	help
>  	  Sourcery CodeBench toolchain for the MIPS architecture, from
> -	  Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52, glibc
> -	  2.17, uClibc 0.9.30 and gdb 7.4.50, kernel headers
> -	  3.8.2. It has support for the following variants:
> +	  Mentor Graphics. It uses gcc 4.8.1, binutils 2.23.52, glibc
> +	  2.18, uClibc 0.9.30 and gdb 7.6.50, kernel headers
> +	  3.11. It has support for the following variants:
>  	    - MIPS32 O32 big endian glibc
>  	      Select a MIPS generic core
>  	      Disable BR2_SOFT_FLOAT
> @@ -328,9 +328,9 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305
>  	    - MIPS32 little endian soft float uclibc
>  	      Not usable in Buildroot yet.
>  
> -config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209
> -	bool "Sourcery CodeBench MIPS 2012.09"
> -	depends on BR2_mips || BR2_mipsel
> +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305
> +	bool "Sourcery CodeBench MIPS 2013.05"
> +	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
>  	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
>  	depends on !BR2_MIPS_NABI32
>  	depends on !BR2_PREFER_STATIC_LIB
> @@ -338,12 +338,12 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209
>  	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
>  	select BR2_INSTALL_LIBSTDCPP
>  	select BR2_HOSTARCH_NEEDS_IA32_LIBS
> -	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5
> +	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_8
>  	help
>  	  Sourcery CodeBench toolchain for the MIPS architecture, from
> -	  Mentor Graphics. It uses gcc 4.7.2, binutils 2.23.51, glibc
> -	  2.16, uClibc 0.9.30 and gdb 7.4.50, kernel headers
> -	  3.5.4. It has support for the following variants:
> +	  Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52, glibc
> +	  2.17, uClibc 0.9.30 and gdb 7.4.50, kernel headers
> +	  3.8.2. It has support for the following variants:
>  	    - MIPS32 O32 big endian glibc
>  	      Select a MIPS generic core
>  	      Disable BR2_SOFT_FLOAT
> @@ -877,9 +877,9 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
>  	default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2
>  	default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_14_3
>  	default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2
> -	default "mips-linux-gnu"         if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209
>  	default "mips-linux-gnu"         if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305
>  	default "mips-linux-gnu"         if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311
> +	default "mips-linux-gnu"         if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405
>  	default "nios2-linux-gnu"        if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305
>  	default "powerpc-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
>  	default "powerpc-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103
> diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> index 47273d3..50e8dca 100644
> --- a/toolchain/toolchain-external/toolchain-external.mk
> +++ b/toolchain/toolchain-external/toolchain-external.mk
> @@ -283,15 +283,15 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.04/components/toolchain/binaries/
>  TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.8-2014.04_linux.tar.xz
>  TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK
> -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209),y)
> -TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/
> -TOOLCHAIN_EXTERNAL_SOURCE = mips-2012.09-99-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/
>  TOOLCHAIN_EXTERNAL_SOURCE = mips-2013.05-66-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/
>  TOOLCHAIN_EXTERNAL_SOURCE = mips-2013.11-36-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
> +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405),y)
> +TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/
> +TOOLCHAIN_EXTERNAL_SOURCE = mips-2014.05-27-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu/
>  TOOLCHAIN_EXTERNAL_SOURCE = sourceryg++-2013.05-43-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
> -- 
> 1.9.3
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 10/11] toolchain-external: add CodeSourcery PowerPC 2012.03
  2014-06-01 10:47 [Buildroot] [PATCH 00/11] Round of external toolchain updates Thomas Petazzoni
                   ` (8 preceding siblings ...)
  2014-06-01 10:47 ` [Buildroot] [PATCH 09/11] toolchain-external: add CodeSourcery MIPS 2014.05, remove 2012.09 Thomas Petazzoni
@ 2014-06-01 10:47 ` Thomas Petazzoni
  2014-06-08 16:49   ` Yann E. MORIN
  2014-06-13 13:00   ` Ryan Barnett
  2014-06-01 10:47 ` [Buildroot] [PATCH 11/11] toolchain-external: add ADI Blackfin 2014R1 toolchain, remove 2012R1 Thomas Petazzoni
  10 siblings, 2 replies; 27+ messages in thread
From: Thomas Petazzoni @ 2014-06-01 10:47 UTC (permalink / raw)
  To: buildroot

However, this toolchain is only usable for e500v2 with the SPE ABI.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 toolchain/toolchain-external/Config.in             | 19 +++++++++++++++++++
 toolchain/toolchain-external/toolchain-external.mk |  3 +++
 2 files changed, 22 insertions(+)

diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index 3331b69..7d086ef 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -416,6 +416,24 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305
 	  from Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52,
 	  glibc 2.17, gdb 7.4.50 and kernel headers 3.7.0.
 
+config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203
+	bool "Sourcery CodeBench PowerPC 2012.03"
+	depends on BR2_powerpc
+	depends on BR2_powerpc_SPE
+	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
+	depends on !BR2_PREFER_STATIC_LIB
+	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
+	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
+	select BR2_INSTALL_LIBSTDCPP
+	select BR2_HOSTARCH_NEEDS_IA32_LIBS
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2
+	help
+	  Sourcery CodeBench toolchain for the PowerPC architecture,
+	  from Mentor Graphics. It uses gcc 4.6.3, binutils 2.21.53,
+	  glibc 2.15, gdb 7.2.50 and kernel headers 3.2.10. It has
+	  support for the following variants:
+	    - e500v2 glibc, SPE, 32 bits
+
 config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103
 	bool "Sourcery CodeBench PowerPC 2011.03"
 	depends on BR2_powerpc
@@ -883,6 +901,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
 	default "nios2-linux-gnu"        if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305
 	default "powerpc-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
 	default "powerpc-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103
+	default "powerpc-mentor-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203
 	default "sh-linux-gnu"           if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
 	default "sh-linux-gnu"           if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203
 	default "sh-linux-gnu"           if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209
diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index 50e8dca..163428f 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -302,6 +302,9 @@ TOOLCHAIN_EXTERNAL_SOURCE = freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103),y)
 TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/
 TOOLCHAIN_EXTERNAL_SOURCE = freescale-2011.03-38-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203),y)
+TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/
+TOOLCHAIN_EXTERNAL_SOURCE = mentor-2012.03-71-powerpc-mentor-linux-gnu-i686-pc-linux-gnu.tar.bz2
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y)
 TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/
 TOOLCHAIN_EXTERNAL_SOURCE = renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
-- 
1.9.3

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 10/11] toolchain-external: add CodeSourcery PowerPC 2012.03
  2014-06-01 10:47 ` [Buildroot] [PATCH 10/11] toolchain-external: add CodeSourcery PowerPC 2012.03 Thomas Petazzoni
@ 2014-06-08 16:49   ` Yann E. MORIN
  2014-06-08 16:54     ` Thomas Petazzoni
  2014-06-13 13:00   ` Ryan Barnett
  1 sibling, 1 reply; 27+ messages in thread
From: Yann E. MORIN @ 2014-06-08 16:49 UTC (permalink / raw)
  To: buildroot

Thomas, All,

On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
> However, this toolchain is only usable for e500v2 with the SPE ABI.

However, this toolchain is not available...

> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
>  toolchain/toolchain-external/Config.in             | 19 +++++++++++++++++++
>  toolchain/toolchain-external/toolchain-external.mk |  3 +++
>  2 files changed, 22 insertions(+)
> 
> diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
> index 3331b69..7d086ef 100644
> --- a/toolchain/toolchain-external/Config.in
> +++ b/toolchain/toolchain-external/Config.in
> @@ -416,6 +416,24 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305
>  	  from Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52,
>  	  glibc 2.17, gdb 7.4.50 and kernel headers 3.7.0.
>  
> +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203
> +	bool "Sourcery CodeBench PowerPC 2012.03"
> +	depends on BR2_powerpc
> +	depends on BR2_powerpc_SPE
> +	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
> +	depends on !BR2_PREFER_STATIC_LIB
> +	select BR2_TOOLCHAIN_EXTERNAL_GLIBC
> +	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
> +	select BR2_INSTALL_LIBSTDCPP
> +	select BR2_HOSTARCH_NEEDS_IA32_LIBS
> +	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2
> +	help
> +	  Sourcery CodeBench toolchain for the PowerPC architecture,
> +	  from Mentor Graphics. It uses gcc 4.6.3, binutils 2.21.53,
> +	  glibc 2.15, gdb 7.2.50 and kernel headers 3.2.10. It has
> +	  support for the following variants:
> +	    - e500v2 glibc, SPE, 32 bits
> +
>  config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103
>  	bool "Sourcery CodeBench PowerPC 2011.03"
>  	depends on BR2_powerpc
> @@ -883,6 +901,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
>  	default "nios2-linux-gnu"        if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305
>  	default "powerpc-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
>  	default "powerpc-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103
> +	default "powerpc-mentor-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203
>  	default "sh-linux-gnu"           if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
>  	default "sh-linux-gnu"           if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203
>  	default "sh-linux-gnu"           if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209
> diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> index 50e8dca..163428f 100644
> --- a/toolchain/toolchain-external/toolchain-external.mk
> +++ b/toolchain/toolchain-external/toolchain-external.mk
> @@ -302,6 +302,9 @@ TOOLCHAIN_EXTERNAL_SOURCE = freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/
>  TOOLCHAIN_EXTERNAL_SOURCE = freescale-2011.03-38-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2
> +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203),y)
> +TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/
> +TOOLCHAIN_EXTERNAL_SOURCE = mentor-2012.03-71-powerpc-mentor-linux-gnu-i686-pc-linux-gnu.tar.bz2

wget "${TOOLCHAIN_EXTERNAL_SITE}${TOOLCHAIN_EXTERNAL_SOURCE}"
 --> 404

Regards,
Yann E. MORIN.

>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/
>  TOOLCHAIN_EXTERNAL_SOURCE = renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
> -- 
> 1.9.3
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 10/11] toolchain-external: add CodeSourcery PowerPC 2012.03
  2014-06-08 16:49   ` Yann E. MORIN
@ 2014-06-08 16:54     ` Thomas Petazzoni
  0 siblings, 0 replies; 27+ messages in thread
From: Thomas Petazzoni @ 2014-06-08 16:54 UTC (permalink / raw)
  To: buildroot

Dear Yann E. MORIN,

On Sun, 8 Jun 2014 18:49:31 +0200, Yann E. MORIN wrote:
> > +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203),y)
> > +TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/
> > +TOOLCHAIN_EXTERNAL_SOURCE = mentor-2012.03-71-powerpc-mentor-linux-gnu-i686-pc-linux-gnu.tar.bz2
> 
> wget "${TOOLCHAIN_EXTERNAL_SITE}${TOOLCHAIN_EXTERNAL_SOURCE}"
>  --> 404

TOOLCHAIN_EXTERNAL_SITE should have been
http://sourcery.mentor.com/public/gnu_toolchain/powerpc-mentor-linux-gnu/.
I didn't detect the problem because I had already the toolchain
downloaded in my $(DL_DIR). I'll fix that!

Thanks!

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 10/11] toolchain-external: add CodeSourcery PowerPC 2012.03
  2014-06-01 10:47 ` [Buildroot] [PATCH 10/11] toolchain-external: add CodeSourcery PowerPC 2012.03 Thomas Petazzoni
  2014-06-08 16:49   ` Yann E. MORIN
@ 2014-06-13 13:00   ` Ryan Barnett
  1 sibling, 0 replies; 27+ messages in thread
From: Ryan Barnett @ 2014-06-13 13:00 UTC (permalink / raw)
  To: buildroot

Thomas, All

On Sun, Jun 1, 2014 at 5:47 AM, Thomas Petazzoni
<thomas.petazzoni@free-electrons.com> wrote:
> However, this toolchain is only usable for e500v2 with the SPE ABI.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
>  toolchain/toolchain-external/Config.in             | 19 +++++++++++++++++++
>  toolchain/toolchain-external/toolchain-external.mk |  3 +++
>  2 files changed, 22 insertions(+)
>
> diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
> index 3331b69..7d086ef 100644
> --- a/toolchain/toolchain-external/Config.in
> +++ b/toolchain/toolchain-external/Config.in
> @@ -416,6 +416,24 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305
>           from Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52,
>           glibc 2.17, gdb 7.4.50 and kernel headers 3.7.0.
>
> +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203
> +       bool "Sourcery CodeBench PowerPC 2012.03"
> +       depends on BR2_powerpc
> +       depends on BR2_powerpc_SPE
> +       depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
> +       depends on !BR2_PREFER_STATIC_LIB
> +       select BR2_TOOLCHAIN_EXTERNAL_GLIBC
> +       select BR2_TOOLCHAIN_HAS_NATIVE_RPC
> +       select BR2_INSTALL_LIBSTDCPP
> +       select BR2_HOSTARCH_NEEDS_IA32_LIBS
> +       select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2
> +       help
> +         Sourcery CodeBench toolchain for the PowerPC architecture,
> +         from Mentor Graphics. It uses gcc 4.6.3, binutils 2.21.53,
> +         glibc 2.15, gdb 7.2.50 and kernel headers 3.2.10. It has
> +         support for the following variants:
> +           - e500v2 glibc, SPE, 32 bits
> +
>  config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103
>         bool "Sourcery CodeBench PowerPC 2011.03"
>         depends on BR2_powerpc
> @@ -883,6 +901,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
>         default "nios2-linux-gnu"        if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305
>         default "powerpc-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
>         default "powerpc-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103
> +       default "powerpc-mentor-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203
>         default "sh-linux-gnu"           if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
>         default "sh-linux-gnu"           if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203
>         default "sh-linux-gnu"           if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209
> diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> index 50e8dca..163428f 100644
> --- a/toolchain/toolchain-external/toolchain-external.mk
> +++ b/toolchain/toolchain-external/toolchain-external.mk
> @@ -302,6 +302,9 @@ TOOLCHAIN_EXTERNAL_SOURCE = freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/
>  TOOLCHAIN_EXTERNAL_SOURCE = freescale-2011.03-38-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2
> +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203),y)
> +TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/

With the website changed to
http://sourcery.mentor.com/public/gnu_toolchain/powerpc-mentor-linux-gnu/
as you noted, this can receive this:

Tested-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>

> +TOOLCHAIN_EXTERNAL_SOURCE = mentor-2012.03-71-powerpc-mentor-linux-gnu-i686-pc-linux-gnu.tar.bz2
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/
>  TOOLCHAIN_EXTERNAL_SOURCE = renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2

^ permalink raw reply	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 11/11] toolchain-external: add ADI Blackfin 2014R1 toolchain, remove 2012R1
  2014-06-01 10:47 [Buildroot] [PATCH 00/11] Round of external toolchain updates Thomas Petazzoni
                   ` (9 preceding siblings ...)
  2014-06-01 10:47 ` [Buildroot] [PATCH 10/11] toolchain-external: add CodeSourcery PowerPC 2012.03 Thomas Petazzoni
@ 2014-06-01 10:47 ` Thomas Petazzoni
  2014-06-08 17:16   ` Yann E. MORIN
  10 siblings, 1 reply; 27+ messages in thread
From: Thomas Petazzoni @ 2014-06-01 10:47 UTC (permalink / raw)
  To: buildroot

This commit adds support for two ADI Blackfin toolchains: the 'stable'
2014R1 based on gcc 4.3, and the 'experimental' 2014R1 based on gcc
4.5.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 toolchain/toolchain-external/Config.in             | 40 ++++++++++++++++------
 toolchain/toolchain-external/toolchain-external.mk | 14 +++++---
 2 files changed, 39 insertions(+), 15 deletions(-)

diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index 7d086ef..9c6862c 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -689,8 +689,8 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109
 	  Other architecture variants (beyond Pentium-4/Xeon) are
 	  supported as well, but glibc is not optimised for it.
 
-config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1
-	bool "Blackfin.uclinux.org 2013R1"
+config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45
+	bool "Blackfin.uclinux.org 2014R1 (gcc 4.5.x stable)"
 	depends on BR2_bfin
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
 	select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
@@ -707,8 +707,8 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1
 	  Toolchain for the Blackfin architecture, from
 	  http://blackfin.uclinux.org.
 
-config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2
-	bool "Blackfin.uclinux.org 2012R2-RC2"
+config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43
+	bool "Blackfin.uclinux.org 2014R1 (gcc 4.3.x stable)"
 	depends on BR2_bfin
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
 	select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
@@ -720,13 +720,13 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2
 	select BR2_TOOLCHAIN_HAS_THREADS
 	select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
 	select BR2_HOSTARCH_NEEDS_IA32_LIBS
-	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10
 	help
 	  Toolchain for the Blackfin architecture, from
 	  http://blackfin.uclinux.org.
 
-config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1
-	bool "Blackfin.uclinux.org 2012R1-RC2"
+config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1
+	bool "Blackfin.uclinux.org 2013R1"
 	depends on BR2_bfin
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
 	select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
@@ -738,7 +738,25 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1
 	select BR2_TOOLCHAIN_HAS_THREADS
 	select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
 	select BR2_HOSTARCH_NEEDS_IA32_LIBS
-	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_3
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10
+	help
+	  Toolchain for the Blackfin architecture, from
+	  http://blackfin.uclinux.org.
+
+config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2
+	bool "Blackfin.uclinux.org 2012R2-RC2"
+	depends on BR2_bfin
+	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
+	select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
+	select BR2_INSTALL_LIBSTDCPP
+	select BR2_LARGEFILE
+	select BR2_INET_IPV6
+	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
+	select BR2_USE_WCHAR
+	select BR2_TOOLCHAIN_HAS_THREADS
+	select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
+	select BR2_HOSTARCH_NEEDS_IA32_LIBS
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5
 	help
 	  Toolchain for the Blackfin architecture, from
 	  http://blackfin.uclinux.org.
@@ -910,12 +928,14 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
 	default "i686-pc-linux-gnu"	 if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109
 	default "i686-pc-linux-gnu"	 if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203
 	default "i686-pc-linux-gnu"	 if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209
-	default "bfin-uclinux"		 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FLAT
-	default "bfin-linux-uclibc"	 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FDPIC
 	default "bfin-uclinux"		 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FLAT
 	default "bfin-linux-uclibc"	 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FDPIC
 	default "bfin-uclinux"		 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FLAT
 	default "bfin-linux-uclibc"	 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FDPIC
+	default "bfin-uclinux"		 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43 && BR2_BINFMT_FLAT
+	default "bfin-linux-uclibc"	 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43 && BR2_BINFMT_FDPIC
+	default "bfin-uclinux"		 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45 && BR2_BINFMT_FLAT
+	default "bfin-linux-uclibc"	 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45 && BR2_BINFMT_FDPIC
 	default "arm-linux-musleabi"	 if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_arm
 	default "armeb-linux-musleabi"	 if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_armeb
 	default "i486-linux-musl"	 if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_i386
diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
index 163428f..9ac669c 100644
--- a/toolchain/toolchain-external/toolchain-external.mk
+++ b/toolchain/toolchain-external/toolchain-external.mk
@@ -329,10 +329,6 @@ TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.03-27-i686-pc-linux-gnu-i386-linux.tar.bz2
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209),y)
 TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/
 TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1),y)
-TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/projects/adi-toolchain/files/2012R1-BF60X/2012R1-RC2-BF60X/i386/
-TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2012R1-RC2.i386.tar.bz2
-TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2012R1-RC2.i386.tar.bz2
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y)
 TOOLCHAIN_EXTERNAL_SITE   = http://downloads.sourceforge.net/project/adi-toolchain/2012R2/2012R2-RC2/i386/
 TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2012R2-RC2.i386.tar.bz2
@@ -341,6 +337,14 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y)
 TOOLCHAIN_EXTERNAL_SITE   = http://downloads.sourceforge.net/project/adi-toolchain/2013R1/2013R1-RC1/i386/
 TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2013R1-RC1.i386.tar.bz2
 TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2013R1-RC1.i386.tar.bz2
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43),y)
+TOOLCHAIN_EXTERNAL_SITE   = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1-RC2/i386/
+TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1-RC2.i386.tar.bz2
+TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45),y)
+TOOLCHAIN_EXTERNAL_SITE   = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1_45-RC2/i386/
+TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1_45-RC2.i386.tar.bz2
+TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1_45-RC2.i386.tar.bz2
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3),y)
 TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/
 TOOLCHAIN_EXTERNAL_SOURCE = lin32-microblazeel-unknown-linux-gnu_14.3_early.tar.xz
@@ -403,7 +407,7 @@ TOOLCHAIN_EXTERNAL_ADD_TOOLCHAIN_DEPENDENCY = NO
 
 TOOLCHAIN_EXTERNAL_INSTALL_STAGING = YES
 
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y)
+ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45),y)
 # Special handling for Blackfin toolchain, because of the split in two
 # tarballs, and the organization of tarball contents. The tarballs
 # contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories,
-- 
1.9.3

^ permalink raw reply related	[flat|nested] 27+ messages in thread

* [Buildroot] [PATCH 11/11] toolchain-external: add ADI Blackfin 2014R1 toolchain, remove 2012R1
  2014-06-01 10:47 ` [Buildroot] [PATCH 11/11] toolchain-external: add ADI Blackfin 2014R1 toolchain, remove 2012R1 Thomas Petazzoni
@ 2014-06-08 17:16   ` Yann E. MORIN
  0 siblings, 0 replies; 27+ messages in thread
From: Yann E. MORIN @ 2014-06-08 17:16 UTC (permalink / raw)
  To: buildroot

Thomas, All,

On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
> This commit adds support for two ADI Blackfin toolchains: the 'stable'
> 2014R1 based on gcc 4.3, and the 'experimental' 2014R1 based on gcc
> 4.5.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

The URLs work! ;-)

Regards,
Yann E. MORIN.

> ---
>  toolchain/toolchain-external/Config.in             | 40 ++++++++++++++++------
>  toolchain/toolchain-external/toolchain-external.mk | 14 +++++---
>  2 files changed, 39 insertions(+), 15 deletions(-)
> 
> diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
> index 7d086ef..9c6862c 100644
> --- a/toolchain/toolchain-external/Config.in
> +++ b/toolchain/toolchain-external/Config.in
> @@ -689,8 +689,8 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109
>  	  Other architecture variants (beyond Pentium-4/Xeon) are
>  	  supported as well, but glibc is not optimised for it.
>  
> -config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1
> -	bool "Blackfin.uclinux.org 2013R1"
> +config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45
> +	bool "Blackfin.uclinux.org 2014R1 (gcc 4.5.x stable)"
>  	depends on BR2_bfin
>  	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
>  	select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
> @@ -707,8 +707,8 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1
>  	  Toolchain for the Blackfin architecture, from
>  	  http://blackfin.uclinux.org.
>  
> -config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2
> -	bool "Blackfin.uclinux.org 2012R2-RC2"
> +config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43
> +	bool "Blackfin.uclinux.org 2014R1 (gcc 4.3.x stable)"
>  	depends on BR2_bfin
>  	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
>  	select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
> @@ -720,13 +720,13 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2
>  	select BR2_TOOLCHAIN_HAS_THREADS
>  	select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
>  	select BR2_HOSTARCH_NEEDS_IA32_LIBS
> -	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5
> +	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10
>  	help
>  	  Toolchain for the Blackfin architecture, from
>  	  http://blackfin.uclinux.org.
>  
> -config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1
> -	bool "Blackfin.uclinux.org 2012R1-RC2"
> +config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1
> +	bool "Blackfin.uclinux.org 2013R1"
>  	depends on BR2_bfin
>  	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
>  	select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
> @@ -738,7 +738,25 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1
>  	select BR2_TOOLCHAIN_HAS_THREADS
>  	select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
>  	select BR2_HOSTARCH_NEEDS_IA32_LIBS
> -	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_3
> +	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10
> +	help
> +	  Toolchain for the Blackfin architecture, from
> +	  http://blackfin.uclinux.org.
> +
> +config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2
> +	bool "Blackfin.uclinux.org 2012R2-RC2"
> +	depends on BR2_bfin
> +	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
> +	select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
> +	select BR2_INSTALL_LIBSTDCPP
> +	select BR2_LARGEFILE
> +	select BR2_INET_IPV6
> +	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
> +	select BR2_USE_WCHAR
> +	select BR2_TOOLCHAIN_HAS_THREADS
> +	select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
> +	select BR2_HOSTARCH_NEEDS_IA32_LIBS
> +	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5
>  	help
>  	  Toolchain for the Blackfin architecture, from
>  	  http://blackfin.uclinux.org.
> @@ -910,12 +928,14 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
>  	default "i686-pc-linux-gnu"	 if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109
>  	default "i686-pc-linux-gnu"	 if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203
>  	default "i686-pc-linux-gnu"	 if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209
> -	default "bfin-uclinux"		 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FLAT
> -	default "bfin-linux-uclibc"	 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FDPIC
>  	default "bfin-uclinux"		 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FLAT
>  	default "bfin-linux-uclibc"	 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FDPIC
>  	default "bfin-uclinux"		 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FLAT
>  	default "bfin-linux-uclibc"	 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FDPIC
> +	default "bfin-uclinux"		 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43 && BR2_BINFMT_FLAT
> +	default "bfin-linux-uclibc"	 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43 && BR2_BINFMT_FDPIC
> +	default "bfin-uclinux"		 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45 && BR2_BINFMT_FLAT
> +	default "bfin-linux-uclibc"	 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45 && BR2_BINFMT_FDPIC
>  	default "arm-linux-musleabi"	 if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_arm
>  	default "armeb-linux-musleabi"	 if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_armeb
>  	default "i486-linux-musl"	 if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_i386
> diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> index 163428f..9ac669c 100644
> --- a/toolchain/toolchain-external/toolchain-external.mk
> +++ b/toolchain/toolchain-external/toolchain-external.mk
> @@ -329,10 +329,6 @@ TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.03-27-i686-pc-linux-gnu-i386-linux.tar.bz2
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209),y)
>  TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/
>  TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2
> -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1),y)
> -TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/projects/adi-toolchain/files/2012R1-BF60X/2012R1-RC2-BF60X/i386/
> -TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2012R1-RC2.i386.tar.bz2
> -TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2012R1-RC2.i386.tar.bz2
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y)
>  TOOLCHAIN_EXTERNAL_SITE   = http://downloads.sourceforge.net/project/adi-toolchain/2012R2/2012R2-RC2/i386/
>  TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2012R2-RC2.i386.tar.bz2
> @@ -341,6 +337,14 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y)
>  TOOLCHAIN_EXTERNAL_SITE   = http://downloads.sourceforge.net/project/adi-toolchain/2013R1/2013R1-RC1/i386/
>  TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2013R1-RC1.i386.tar.bz2
>  TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2013R1-RC1.i386.tar.bz2
> +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43),y)
> +TOOLCHAIN_EXTERNAL_SITE   = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1-RC2/i386/
> +TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1-RC2.i386.tar.bz2
> +TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2
> +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45),y)
> +TOOLCHAIN_EXTERNAL_SITE   = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1_45-RC2/i386/
> +TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1_45-RC2.i386.tar.bz2
> +TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1_45-RC2.i386.tar.bz2
>  else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3),y)
>  TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/
>  TOOLCHAIN_EXTERNAL_SOURCE = lin32-microblazeel-unknown-linux-gnu_14.3_early.tar.xz
> @@ -403,7 +407,7 @@ TOOLCHAIN_EXTERNAL_ADD_TOOLCHAIN_DEPENDENCY = NO
>  
>  TOOLCHAIN_EXTERNAL_INSTALL_STAGING = YES
>  
> -ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y)
> +ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45),y)
>  # Special handling for Blackfin toolchain, because of the split in two
>  # tarballs, and the organization of tarball contents. The tarballs
>  # contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories,
> -- 
> 1.9.3
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

^ permalink raw reply	[flat|nested] 27+ messages in thread

end of thread, other threads:[~2014-06-13 13:00 UTC | newest]

Thread overview: 27+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-06-01 10:47 [Buildroot] [PATCH 00/11] Round of external toolchain updates Thomas Petazzoni
2014-06-01 10:47 ` [Buildroot] [PATCH 01/11] toolchain-external: apply kernel headers check to non-custom toolchains Thomas Petazzoni
2014-06-08 16:10   ` Yann E. MORIN
2014-06-01 10:47 ` [Buildroot] [PATCH 02/11] toolchain-external: do not pass TOOLCHAIN_EXTERNAL_CFLAGS for kernel headers check Thomas Petazzoni
2014-06-08 16:17   ` Yann E. MORIN
2014-06-01 10:47 ` [Buildroot] [PATCH 03/11] toolchain-external: support only one Linaro ARM toolchain at a time Thomas Petazzoni
2014-06-08 16:18   ` Yann E. MORIN
2014-06-01 10:47 ` [Buildroot] [PATCH 04/11] toolchain-external: support only one Linaro AArch64 " Thomas Petazzoni
2014-06-08 16:19   ` Yann E. MORIN
2014-06-01 10:47 ` [Buildroot] [PATCH 05/11] toolchain-external: bump Linaro ARM to 2014.05 Thomas Petazzoni
2014-06-08 16:30   ` Yann E. MORIN
2014-06-01 10:47 ` [Buildroot] [PATCH 06/11] toolchain-external: bump Linaro ARMeb toolchain to 2014.04 Thomas Petazzoni
2014-06-08 16:37   ` Yann E. MORIN
2014-06-01 10:47 ` [Buildroot] [PATCH 07/11] toolchain-external: bump Linaro AArch64 toolchain to 2014.05 Thomas Petazzoni
2014-06-08 16:39   ` Yann E. MORIN
2014-06-01 10:47 ` [Buildroot] [PATCH 08/11] toolchain-external: bump musl external toolchains to 1.1.1 Thomas Petazzoni
2014-06-01 10:58   ` Baruch Siach
2014-06-01 11:02     ` Thomas Petazzoni
2014-06-13 12:49   ` Peter Korsgaard
2014-06-01 10:47 ` [Buildroot] [PATCH 09/11] toolchain-external: add CodeSourcery MIPS 2014.05, remove 2012.09 Thomas Petazzoni
2014-06-08 16:44   ` Yann E. MORIN
2014-06-01 10:47 ` [Buildroot] [PATCH 10/11] toolchain-external: add CodeSourcery PowerPC 2012.03 Thomas Petazzoni
2014-06-08 16:49   ` Yann E. MORIN
2014-06-08 16:54     ` Thomas Petazzoni
2014-06-13 13:00   ` Ryan Barnett
2014-06-01 10:47 ` [Buildroot] [PATCH 11/11] toolchain-external: add ADI Blackfin 2014R1 toolchain, remove 2012R1 Thomas Petazzoni
2014-06-08 17:16   ` Yann E. MORIN

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox