* [Buildroot] [PATCH 1/2] ti-gfx: use only -I${includedir} as pkg-config Cflags
@ 2014-06-01 10:18 Peter Kümmel
2014-06-01 10:18 ` [Buildroot] [PATCH 2/2] sunxi-mali: " Peter Kümmel
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Peter Kümmel @ 2014-06-01 10:18 UTC (permalink / raw)
To: buildroot
Using only -I${includedir} in common practice.
Settings only -I${includedir}/GLES2 breaks Qt5's CMake files,
because at configure time CMake only searchs the paths reported
by pkg-config, and not even /usr/include is used as default.
Even though pkg-config strips out standard include path, that's not
the case with pkgconf (which we are using) in cross-compilation,
which correctly reports the /usr/include dir prefixed with the
sysroot.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter K?mmel <syntheticpp@gmx.net>
---
package/ti-gfx/egl.pc | 2 +-
package/ti-gfx/glesv2.pc | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/ti-gfx/egl.pc b/package/ti-gfx/egl.pc
index 223fb04..36ea413 100644
--- a/package/ti-gfx/egl.pc
+++ b/package/ti-gfx/egl.pc
@@ -8,4 +8,4 @@ Description: TI Graphics SDK implementation of EGL
Version: 1.9.2188537
Requires:
Libs: -L${libdir} -lEGL -lGLESv2 -lIMGegl
-Cflags: -I${includedir}/EGL/ -I${includedir}
+Cflags: -I${includedir}
diff --git a/package/ti-gfx/glesv2.pc b/package/ti-gfx/glesv2.pc
index 4c70aec..b458133 100644
--- a/package/ti-gfx/glesv2.pc
+++ b/package/ti-gfx/glesv2.pc
@@ -8,4 +8,4 @@ Description: TI Graphics SDK implementation of OpenGL ESv2
Version: 1.9.2188537
Requires:
Libs: -L${libdir} -lGLESv2 -lGLES_CM -lsrv_um -lusc -lEGL -lIMGegl
-Cflags: -I${includedir}/GLES2
+Cflags: -I${includedir}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Buildroot] [PATCH 2/2] sunxi-mali: use only -I${includedir} as pkg-config Cflags
2014-06-01 10:18 [Buildroot] [PATCH 1/2] ti-gfx: use only -I${includedir} as pkg-config Cflags Peter Kümmel
@ 2014-06-01 10:18 ` Peter Kümmel
2014-06-03 4:54 ` Peter Kümmel
2014-06-03 4:54 ` [Buildroot] [PATCH 1/2] ti-gfx: " Peter Kümmel
2014-06-08 16:53 ` Thomas Petazzoni
2 siblings, 1 reply; 8+ messages in thread
From: Peter Kümmel @ 2014-06-01 10:18 UTC (permalink / raw)
To: buildroot
Using only -I${includedir} in common practice.
Settings only -I${includedir}/GLES2 breaks Qt5's CMake files,
because at configure time CMake only searchs the paths reported
by pkg-config, and not even /usr/include is used as default.
Even though pkg-config strips out standard include path, that's not
the case with pkgconf (which we are using) in cross-compilation,
which correctly reports the /usr/include dir prefixed with the
sysroot.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter K?mmel <syntheticpp@gmx.net>
---
package/sunxi-mali/egl.pc | 2 +-
package/sunxi-mali/glesv2.pc | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/sunxi-mali/egl.pc b/package/sunxi-mali/egl.pc
index b062ad1..2823209 100644
--- a/package/sunxi-mali/egl.pc
+++ b/package/sunxi-mali/egl.pc
@@ -8,5 +8,5 @@ Description: ARM Mali implementation of EGL
Version: 1.4
Requires:
Libs: -L${libdir} -lEGL -lGLESv2 -lUMP
-Cflags: -I${includedir}/EGL/ -I${includedir}
+Cflags: -I${includedir}
diff --git a/package/sunxi-mali/glesv2.pc b/package/sunxi-mali/glesv2.pc
index 9273678..4702d13 100644
--- a/package/sunxi-mali/glesv2.pc
+++ b/package/sunxi-mali/glesv2.pc
@@ -8,5 +8,5 @@ Description: ARM Mali implementation of OpenGL ESv2
Version: 2.0
Requires:
Libs: -L${libdir} -lGLESv2 -lGLESv1_CM -lUMP
-Cflags: -I${includedir}/GLES2
+Cflags: -I${includedir}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Buildroot] [PATCH 2/2] sunxi-mali: use only -I${includedir} as pkg-config Cflags
2014-06-01 10:18 ` [Buildroot] [PATCH 2/2] sunxi-mali: " Peter Kümmel
@ 2014-06-03 4:54 ` Peter Kümmel
0 siblings, 0 replies; 8+ messages in thread
From: Peter Kümmel @ 2014-06-03 4:54 UTC (permalink / raw)
To: buildroot
Any reason why this is not committed?
On 01.06.2014 12:18, Peter K?mmel wrote:
> Using only -I${includedir} in common practice.
>
> Settings only -I${includedir}/GLES2 breaks Qt5's CMake files,
> because at configure time CMake only searchs the paths reported
> by pkg-config, and not even /usr/include is used as default.
>
> Even though pkg-config strips out standard include path, that's not
> the case with pkgconf (which we are using) in cross-compilation,
> which correctly reports the /usr/include dir prefixed with the
> sysroot.
>
> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
> Signed-off-by: Peter K?mmel <syntheticpp@gmx.net>
> ---
> package/sunxi-mali/egl.pc | 2 +-
> package/sunxi-mali/glesv2.pc | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/package/sunxi-mali/egl.pc b/package/sunxi-mali/egl.pc
> index b062ad1..2823209 100644
> --- a/package/sunxi-mali/egl.pc
> +++ b/package/sunxi-mali/egl.pc
> @@ -8,5 +8,5 @@ Description: ARM Mali implementation of EGL
> Version: 1.4
> Requires:
> Libs: -L${libdir} -lEGL -lGLESv2 -lUMP
> -Cflags: -I${includedir}/EGL/ -I${includedir}
> +Cflags: -I${includedir}
>
> diff --git a/package/sunxi-mali/glesv2.pc b/package/sunxi-mali/glesv2.pc
> index 9273678..4702d13 100644
> --- a/package/sunxi-mali/glesv2.pc
> +++ b/package/sunxi-mali/glesv2.pc
> @@ -8,5 +8,5 @@ Description: ARM Mali implementation of OpenGL ESv2
> Version: 2.0
> Requires:
> Libs: -L${libdir} -lGLESv2 -lGLESv1_CM -lUMP
> -Cflags: -I${includedir}/GLES2
> +Cflags: -I${includedir}
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH 1/2] ti-gfx: use only -I${includedir} as pkg-config Cflags
2014-06-01 10:18 [Buildroot] [PATCH 1/2] ti-gfx: use only -I${includedir} as pkg-config Cflags Peter Kümmel
2014-06-01 10:18 ` [Buildroot] [PATCH 2/2] sunxi-mali: " Peter Kümmel
@ 2014-06-03 4:54 ` Peter Kümmel
2014-06-08 16:53 ` Thomas Petazzoni
2 siblings, 0 replies; 8+ messages in thread
From: Peter Kümmel @ 2014-06-03 4:54 UTC (permalink / raw)
To: buildroot
Any reason why this is not committed?
On 01.06.2014 12:18, Peter K?mmel wrote:
> Using only -I${includedir} in common practice.
>
> Settings only -I${includedir}/GLES2 breaks Qt5's CMake files,
> because at configure time CMake only searchs the paths reported
> by pkg-config, and not even /usr/include is used as default.
>
> Even though pkg-config strips out standard include path, that's not
> the case with pkgconf (which we are using) in cross-compilation,
> which correctly reports the /usr/include dir prefixed with the
> sysroot.
>
> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
> Signed-off-by: Peter K?mmel <syntheticpp@gmx.net>
> ---
> package/ti-gfx/egl.pc | 2 +-
> package/ti-gfx/glesv2.pc | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/package/ti-gfx/egl.pc b/package/ti-gfx/egl.pc
> index 223fb04..36ea413 100644
> --- a/package/ti-gfx/egl.pc
> +++ b/package/ti-gfx/egl.pc
> @@ -8,4 +8,4 @@ Description: TI Graphics SDK implementation of EGL
> Version: 1.9.2188537
> Requires:
> Libs: -L${libdir} -lEGL -lGLESv2 -lIMGegl
> -Cflags: -I${includedir}/EGL/ -I${includedir}
> +Cflags: -I${includedir}
> diff --git a/package/ti-gfx/glesv2.pc b/package/ti-gfx/glesv2.pc
> index 4c70aec..b458133 100644
> --- a/package/ti-gfx/glesv2.pc
> +++ b/package/ti-gfx/glesv2.pc
> @@ -8,4 +8,4 @@ Description: TI Graphics SDK implementation of OpenGL ESv2
> Version: 1.9.2188537
> Requires:
> Libs: -L${libdir} -lGLESv2 -lGLES_CM -lsrv_um -lusc -lEGL -lIMGegl
> -Cflags: -I${includedir}/GLES2
> +Cflags: -I${includedir}
>
^ permalink raw reply [flat|nested] 8+ messages in thread* [Buildroot] [PATCH 1/2] ti-gfx: use only -I${includedir} as pkg-config Cflags
2014-06-01 10:18 [Buildroot] [PATCH 1/2] ti-gfx: use only -I${includedir} as pkg-config Cflags Peter Kümmel
2014-06-01 10:18 ` [Buildroot] [PATCH 2/2] sunxi-mali: " Peter Kümmel
2014-06-03 4:54 ` [Buildroot] [PATCH 1/2] ti-gfx: " Peter Kümmel
@ 2014-06-08 16:53 ` Thomas Petazzoni
2 siblings, 0 replies; 8+ messages in thread
From: Thomas Petazzoni @ 2014-06-08 16:53 UTC (permalink / raw)
To: buildroot
Dear Peter K?mmel,
On Sun, 1 Jun 2014 12:18:27 +0200, Peter K?mmel wrote:
> Using only -I${includedir} in common practice.
>
> Settings only -I${includedir}/GLES2 breaks Qt5's CMake files,
> because at configure time CMake only searchs the paths reported
> by pkg-config, and not even /usr/include is used as default.
>
> Even though pkg-config strips out standard include path, that's not
> the case with pkgconf (which we are using) in cross-compilation,
> which correctly reports the /usr/include dir prefixed with the
> sysroot.
>
> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
> Signed-off-by: Peter K?mmel <syntheticpp@gmx.net>
Both patches applied, thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH 1/2] ti-gfx: use only -I${includedir} as pkg-config Cflags
@ 2014-06-01 9:50 Peter Kümmel
2014-06-01 10:09 ` Yann E. MORIN
0 siblings, 1 reply; 8+ messages in thread
From: Peter Kümmel @ 2014-06-01 9:50 UTC (permalink / raw)
To: buildroot
Using only -I${includedir} in common practice.
Settings only -I${includedir}/GLES2 breaks Qt5's CMake files,
because at configure time CMake only searchs the paths reported
by pkg-config, and not even /usr/include is used as default.
Signed-off-by: Peter K?mmel <syntheticpp@gmx.net>
---
package/ti-gfx/egl.pc | 2 +-
package/ti-gfx/glesv2.pc | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/package/ti-gfx/egl.pc b/package/ti-gfx/egl.pc
index 223fb04..36ea413 100644
--- a/package/ti-gfx/egl.pc
+++ b/package/ti-gfx/egl.pc
@@ -8,4 +8,4 @@ Description: TI Graphics SDK implementation of EGL
Version: 1.9.2188537
Requires:
Libs: -L${libdir} -lEGL -lGLESv2 -lIMGegl
-Cflags: -I${includedir}/EGL/ -I${includedir}
+Cflags: -I${includedir}
diff --git a/package/ti-gfx/glesv2.pc b/package/ti-gfx/glesv2.pc
index 4c70aec..b458133 100644
--- a/package/ti-gfx/glesv2.pc
+++ b/package/ti-gfx/glesv2.pc
@@ -8,4 +8,4 @@ Description: TI Graphics SDK implementation of OpenGL ESv2
Version: 1.9.2188537
Requires:
Libs: -L${libdir} -lGLESv2 -lGLES_CM -lsrv_um -lusc -lEGL -lIMGegl
-Cflags: -I${includedir}/GLES2
+Cflags: -I${includedir}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Buildroot] [PATCH 1/2] ti-gfx: use only -I${includedir} as pkg-config Cflags
2014-06-01 9:50 Peter Kümmel
@ 2014-06-01 10:09 ` Yann E. MORIN
2014-06-01 10:17 ` Peter Kümmel
0 siblings, 1 reply; 8+ messages in thread
From: Yann E. MORIN @ 2014-06-01 10:09 UTC (permalink / raw)
To: buildroot
Peter, All,
On 2014-06-01 11:50 +0200, Peter K?mmel spake thusly:
> Using only -I${includedir} in common practice.
>
> Settings only -I${includedir}/GLES2 breaks Qt5's CMake files,
> because at configure time CMake only searchs the paths reported
> by pkg-config, and not even /usr/include is used as default.
I would add something like:
Even though pkg-config strips out standard include path, that's not
the case with pkgconf (which we are using) in cross-compilation,
which correctly reports the /usr/include dir prefixed with the
sysroot.
> Signed-off-by: Peter K?mmel <syntheticpp@gmx.net>
With the above blurb added in the commit log:
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Regards,
Yann E. MORIN.
> ---
> package/ti-gfx/egl.pc | 2 +-
> package/ti-gfx/glesv2.pc | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/package/ti-gfx/egl.pc b/package/ti-gfx/egl.pc
> index 223fb04..36ea413 100644
> --- a/package/ti-gfx/egl.pc
> +++ b/package/ti-gfx/egl.pc
> @@ -8,4 +8,4 @@ Description: TI Graphics SDK implementation of EGL
> Version: 1.9.2188537
> Requires:
> Libs: -L${libdir} -lEGL -lGLESv2 -lIMGegl
> -Cflags: -I${includedir}/EGL/ -I${includedir}
> +Cflags: -I${includedir}
> diff --git a/package/ti-gfx/glesv2.pc b/package/ti-gfx/glesv2.pc
> index 4c70aec..b458133 100644
> --- a/package/ti-gfx/glesv2.pc
> +++ b/package/ti-gfx/glesv2.pc
> @@ -8,4 +8,4 @@ Description: TI Graphics SDK implementation of OpenGL ESv2
> Version: 1.9.2188537
> Requires:
> Libs: -L${libdir} -lGLESv2 -lGLES_CM -lsrv_um -lusc -lEGL -lIMGegl
> -Cflags: -I${includedir}/GLES2
> +Cflags: -I${includedir}
> --
> 1.7.10.4
>
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 8+ messages in thread* [Buildroot] [PATCH 1/2] ti-gfx: use only -I${includedir} as pkg-config Cflags
2014-06-01 10:09 ` Yann E. MORIN
@ 2014-06-01 10:17 ` Peter Kümmel
0 siblings, 0 replies; 8+ messages in thread
From: Peter Kümmel @ 2014-06-01 10:17 UTC (permalink / raw)
To: buildroot
On 01.06.2014 12:09, Yann E. MORIN wrote:
> Peter, All,
>
> On 2014-06-01 11:50 +0200, Peter K?mmel spake thusly:
>> Using only -I${includedir} in common practice.
>>
>> Settings only -I${includedir}/GLES2 breaks Qt5's CMake files,
>> because at configure time CMake only searchs the paths reported
>> by pkg-config, and not even /usr/include is used as default.
>
> I would add something like:
>
> Even though pkg-config strips out standard include path, that's not
> the case with pkgconf (which we are using) in cross-compilation,
> which correctly reports the /usr/include dir prefixed with the
> sysroot.
>
>> Signed-off-by: Peter K?mmel <syntheticpp@gmx.net>
>
> With the above blurb added in the commit log:
> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Also noticed it, but I though it will be added by git send-email (at least a Cc:)
>
> Regards,
> Yann E. MORIN.
>
>> ---
>> package/ti-gfx/egl.pc | 2 +-
>> package/ti-gfx/glesv2.pc | 2 +-
>> 2 files changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/package/ti-gfx/egl.pc b/package/ti-gfx/egl.pc
>> index 223fb04..36ea413 100644
>> --- a/package/ti-gfx/egl.pc
>> +++ b/package/ti-gfx/egl.pc
>> @@ -8,4 +8,4 @@ Description: TI Graphics SDK implementation of EGL
>> Version: 1.9.2188537
>> Requires:
>> Libs: -L${libdir} -lEGL -lGLESv2 -lIMGegl
>> -Cflags: -I${includedir}/EGL/ -I${includedir}
>> +Cflags: -I${includedir}
>> diff --git a/package/ti-gfx/glesv2.pc b/package/ti-gfx/glesv2.pc
>> index 4c70aec..b458133 100644
>> --- a/package/ti-gfx/glesv2.pc
>> +++ b/package/ti-gfx/glesv2.pc
>> @@ -8,4 +8,4 @@ Description: TI Graphics SDK implementation of OpenGL ESv2
>> Version: 1.9.2188537
>> Requires:
>> Libs: -L${libdir} -lGLESv2 -lGLES_CM -lsrv_um -lusc -lEGL -lIMGegl
>> -Cflags: -I${includedir}/GLES2
>> +Cflags: -I${includedir}
>> --
>> 1.7.10.4
>>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2014-06-08 16:53 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-06-01 10:18 [Buildroot] [PATCH 1/2] ti-gfx: use only -I${includedir} as pkg-config Cflags Peter Kümmel
2014-06-01 10:18 ` [Buildroot] [PATCH 2/2] sunxi-mali: " Peter Kümmel
2014-06-03 4:54 ` Peter Kümmel
2014-06-03 4:54 ` [Buildroot] [PATCH 1/2] ti-gfx: " Peter Kümmel
2014-06-08 16:53 ` Thomas Petazzoni
-- strict thread matches above, loose matches on Subject: below --
2014-06-01 9:50 Peter Kümmel
2014-06-01 10:09 ` Yann E. MORIN
2014-06-01 10:17 ` Peter Kümmel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox