* [Buildroot] [PATCH 1/3] package/openocd: explicitly disable unselected adapters
@ 2015-01-02 21:19 Samuel Martin
2015-01-02 21:19 ` [Buildroot] [PATCH 2/3] package/openocd: disable aice programmer on non-MMU architecture Samuel Martin
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Samuel Martin @ 2015-01-02 21:19 UTC (permalink / raw)
To: buildroot
Some adapters are automatically enabled, but may not be built because of
missing (archecture) dependencies. So, just set the options symetrically.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
---
package/openocd/openocd.mk | 58 +++++++++++++++++++++++-----------------------
1 file changed, 29 insertions(+), 29 deletions(-)
diff --git a/package/openocd/openocd.mk b/package/openocd/openocd.mk
index b0bcb7e..ad1f95b 100644
--- a/package/openocd/openocd.mk
+++ b/package/openocd/openocd.mk
@@ -29,35 +29,35 @@ OPENOCD_DEPENDENCIES = \
# Adapters
OPENOCD_CONF_OPTS += \
- $(if $(BR2_PACKAGE_OPENOCD_FTDI),--enable-ftdi) \
- $(if $(BR2_PACKAGE_OPENOCD_STLINK),--enable-stlink) \
- $(if $(BR2_PACKAGE_OPENOCD_TI_ICDI),--enable-ti-icdi) \
- $(if $(BR2_PACKAGE_OPENOCD_ULINK),--enable-ulink) \
- $(if $(BR2_PACKAGE_OPENOCD_UBLASTER2),--enable-usb-blaster-2) \
- $(if $(BR2_PACKAGE_OPENOCD_JLINK),--enable-jlink) \
- $(if $(BR2_PACKAGE_OPENOCD_OSDBM),--enable-osbdm) \
- $(if $(BR2_PACKAGE_OPENOCD_OPENDOUS),--enable-opendous) \
- $(if $(BR2_PACKAGE_OPENOCD_AICE),--enable-aice) \
- $(if $(BR2_PACKAGE_OPENOCD_VSLLINK),--enable-vsllink) \
- $(if $(BR2_PACKAGE_OPENOCD_USBPROG),--enable-usbprog) \
- $(if $(BR2_PACKAGE_OPENOCD_RLINK),--enable-rlink) \
- $(if $(BR2_PACKAGE_OPENOCD_ARMEW),--enable-armjtagew) \
- $(if $(BR2_PACKAGE_OPENOCD_CMSIS_DAP),--enable-cmsis-dap) \
- $(if $(BR2_PACKAGE_OPENOCD_PARPORT),--enable-parport) \
- $(if $(BR2_PACKAGE_OPENOCD_FT2XXX),--enable-legacy-ft2232_libftdi) \
- $(if $(BR2_PACKAGE_OPENOCD_VPI),--enable-jtag_vpi) \
- $(if $(BR2_PACKAGE_OPENOCD_UBLASTER),--enable-usb_blaster_libftdi) \
- $(if $(BR2_PACKAGE_OPENOCD_AMTJT),--enable-amtjtagaccel) \
- $(if $(BR2_PACKAGE_OPENOCD_ZY1000_MASTER),--enable-zy1000-master) \
- $(if $(BR2_PACKAGE_OPENOCD_ZY1000),--enable-zy1000) \
- $(if $(BR2_PACKAGE_OPENOCD_EP93XX),--enable-ep93xx) \
- $(if $(BR2_PACKAGE_OPENOCD_AT91RM),--enable-at91rm9200) \
- $(if $(BR2_PACKAGE_OPENOCD_BCM2835),--enable-bcm2835gpio) \
- $(if $(BR2_PACKAGE_OPENOCD_GW16012),--enable-gw16012) \
- $(if $(BR2_PACKAGE_OPENOCD_PRESTO),--enable-presto_libftdi) \
- $(if $(BR2_PACKAGE_OPENOCD_OPENJTAG),--enable-openjtag_ftdi) \
- $(if $(BR2_PACKAGE_OPENOCD_BUSPIRATE),--enable-buspirate) \
- $(if $(BR2_PACKAGE_OPENOCD_SYSFS),--enable-sysfsgpio)
+ $(if $(BR2_PACKAGE_OPENOCD_FTDI),--enable-ftdi,--disable-ftdi) \
+ $(if $(BR2_PACKAGE_OPENOCD_STLINK),--enable-stlink,--disable-stlink) \
+ $(if $(BR2_PACKAGE_OPENOCD_TI_ICDI),--enable-ti-icdi,--disable-ti-icdi) \
+ $(if $(BR2_PACKAGE_OPENOCD_ULINK),--enable-ulink,--disable-ulink) \
+ $(if $(BR2_PACKAGE_OPENOCD_UBLASTER2),--enable-usb-blaster-2,--disable-usb-blaster-2) \
+ $(if $(BR2_PACKAGE_OPENOCD_JLINK),--enable-jlink,--disable-jlink) \
+ $(if $(BR2_PACKAGE_OPENOCD_OSDBM),--enable-osbdm,--disable-osbdm) \
+ $(if $(BR2_PACKAGE_OPENOCD_OPENDOUS),--enable-opendous,--disable-opendous) \
+ $(if $(BR2_PACKAGE_OPENOCD_AICE),--enable-aice,--disable-aice) \
+ $(if $(BR2_PACKAGE_OPENOCD_VSLLINK),--enable-vsllink,--disable-vsllink) \
+ $(if $(BR2_PACKAGE_OPENOCD_USBPROG),--enable-usbprog,--disable-usbprog) \
+ $(if $(BR2_PACKAGE_OPENOCD_RLINK),--enable-rlink,--disable-rlink) \
+ $(if $(BR2_PACKAGE_OPENOCD_ARMEW),--enable-armjtagew,--disable-armjtagew) \
+ $(if $(BR2_PACKAGE_OPENOCD_CMSIS_DAP),--enable-cmsis-dap,--disable-cmsis-dap) \
+ $(if $(BR2_PACKAGE_OPENOCD_PARPORT),--enable-parport,--disable-parport) \
+ $(if $(BR2_PACKAGE_OPENOCD_FT2XXX),--enable-legacy-ft2232_libftdi,--disable-legacy-ft2232_libftdi) \
+ $(if $(BR2_PACKAGE_OPENOCD_VPI),--enable-jtag_vpi,--disable-jtag_vpi) \
+ $(if $(BR2_PACKAGE_OPENOCD_UBLASTER),--enable-usb_blaster_libftdi,--disable-usb_blaster_libftdi) \
+ $(if $(BR2_PACKAGE_OPENOCD_AMTJT),--enable-amtjtagaccel,--disable-amjtagaccel) \
+ $(if $(BR2_PACKAGE_OPENOCD_ZY1000_MASTER),--enable-zy1000-master,--disable-zy1000-master) \
+ $(if $(BR2_PACKAGE_OPENOCD_ZY1000),--enable-zy1000,--disable-zy1000) \
+ $(if $(BR2_PACKAGE_OPENOCD_EP93XX),--enable-ep93xx,--disable-ep93xx) \
+ $(if $(BR2_PACKAGE_OPENOCD_AT91RM),--enable-at91rm9200,--disable-at91rm9200) \
+ $(if $(BR2_PACKAGE_OPENOCD_BCM2835),--enable-bcm2835gpio,--disable-bcm2835gpio) \
+ $(if $(BR2_PACKAGE_OPENOCD_GW16012),--enable-gw16012,--disable-gw16012) \
+ $(if $(BR2_PACKAGE_OPENOCD_PRESTO),--enable-presto_libftdi,--disable-presto_libftdi) \
+ $(if $(BR2_PACKAGE_OPENOCD_OPENJTAG),--enable-openjtag_ftdi,--disable-openjtag_ftdi) \
+ $(if $(BR2_PACKAGE_OPENOCD_BUSPIRATE),--enable-buspirate,--disable-buspirate) \
+ $(if $(BR2_PACKAGE_OPENOCD_SYSFS),--enable-sysfsgpio,--disable-sysfsgpio)
# Enable all configuration options for host build.
#
--
2.2.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [Buildroot] [PATCH 2/3] package/openocd: disable aice programmer on non-MMU architecture
2015-01-02 21:19 [Buildroot] [PATCH 1/3] package/openocd: explicitly disable unselected adapters Samuel Martin
@ 2015-01-02 21:19 ` Samuel Martin
2015-01-03 20:35 ` Thomas Petazzoni
2015-01-02 21:19 ` [Buildroot] [PATCH 3/3] package/openocd: fix libftdi mis-detection Samuel Martin
2015-01-03 20:35 ` [Buildroot] [PATCH 1/3] package/openocd: explicitly disable unselected adapters Thomas Petazzoni
2 siblings, 1 reply; 7+ messages in thread
From: Samuel Martin @ 2015-01-02 21:19 UTC (permalink / raw)
To: buildroot
aice sources use fork function, which is only available on architecture
with MMU.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
---
package/openocd/Config.in | 1 +
1 file changed, 1 insertion(+)
diff --git a/package/openocd/Config.in b/package/openocd/Config.in
index 1f9889c..7c140c7 100644
--- a/package/openocd/Config.in
+++ b/package/openocd/Config.in
@@ -76,6 +76,7 @@ config BR2_PACKAGE_OPENOCD_OPENDOUS
config BR2_PACKAGE_OPENOCD_AICE
bool "Andes JTAG Programmer"
select BR2_PACKAGE_LIBUSB
+ depends on BR2_USE_MMU # use fork()
depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
help
Enable building support for the Andes JTAG
--
2.2.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH 2/3] package/openocd: disable aice programmer on non-MMU architecture
2015-01-02 21:19 ` [Buildroot] [PATCH 2/3] package/openocd: disable aice programmer on non-MMU architecture Samuel Martin
@ 2015-01-03 20:35 ` Thomas Petazzoni
0 siblings, 0 replies; 7+ messages in thread
From: Thomas Petazzoni @ 2015-01-03 20:35 UTC (permalink / raw)
To: buildroot
Dear Samuel Martin,
On Fri, 2 Jan 2015 22:19:27 +0100, Samuel Martin wrote:
> aice sources use fork function, which is only available on architecture
> with MMU.
>
> Signed-off-by: Samuel Martin <s.martin49@gmail.com>
> ---
> package/openocd/Config.in | 1 +
> 1 file changed, 1 insertion(+)
Applied, thanks.
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH 3/3] package/openocd: fix libftdi mis-detection
2015-01-02 21:19 [Buildroot] [PATCH 1/3] package/openocd: explicitly disable unselected adapters Samuel Martin
2015-01-02 21:19 ` [Buildroot] [PATCH 2/3] package/openocd: disable aice programmer on non-MMU architecture Samuel Martin
@ 2015-01-02 21:19 ` Samuel Martin
2015-01-03 20:39 ` Thomas Petazzoni
2015-01-03 20:35 ` [Buildroot] [PATCH 1/3] package/openocd: explicitly disable unselected adapters Thomas Petazzoni
2 siblings, 1 reply; 7+ messages in thread
From: Samuel Martin @ 2015-01-02 21:19 UTC (permalink / raw)
To: buildroot
By-pass failing ac_search_libs check when libftdi is enabled.
Fixes:
http://autobuild.buildroot.org/results/e90/e90b4d5ad79d99487f21c9d18581e8eba7034501/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
---
package/openocd/openocd.mk | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/package/openocd/openocd.mk b/package/openocd/openocd.mk
index ad1f95b..34a2bbd 100644
--- a/package/openocd/openocd.mk
+++ b/package/openocd/openocd.mk
@@ -8,7 +8,8 @@ OPENOCD_VERSION = 0.8.0
OPENOCD_SOURCE = openocd-$(OPENOCD_VERSION).tar.bz2
OPENOCD_SITE = http://downloads.sourceforge.net/project/openocd/openocd/$(OPENOCD_VERSION)
-OPENOCD_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -std=gnu99"
+OPENOCD_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -std=gnu99" \
+ $(if $(BR2_PACKAGE_LIBFTDI),ac_cv_search_ftdi_new=yes)
OPENOCD_CONF_OPTS = \
--oldincludedir=$(STAGING_DIR)/usr/include \
--
2.2.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH 3/3] package/openocd: fix libftdi mis-detection
2015-01-02 21:19 ` [Buildroot] [PATCH 3/3] package/openocd: fix libftdi mis-detection Samuel Martin
@ 2015-01-03 20:39 ` Thomas Petazzoni
2015-01-05 20:08 ` Samuel Martin
0 siblings, 1 reply; 7+ messages in thread
From: Thomas Petazzoni @ 2015-01-03 20:39 UTC (permalink / raw)
To: buildroot
Dear Samuel Martin,
On Fri, 2 Jan 2015 22:19:28 +0100, Samuel Martin wrote:
> By-pass failing ac_search_libs check when libftdi is enabled.
>
> Fixes:
> http://autobuild.buildroot.org/results/e90/e90b4d5ad79d99487f21c9d18581e8eba7034501/
>
> Signed-off-by: Samuel Martin <s.martin49@gmail.com>
> ---
> package/openocd/openocd.mk | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/package/openocd/openocd.mk b/package/openocd/openocd.mk
> index ad1f95b..34a2bbd 100644
> --- a/package/openocd/openocd.mk
> +++ b/package/openocd/openocd.mk
> @@ -8,7 +8,8 @@ OPENOCD_VERSION = 0.8.0
> OPENOCD_SOURCE = openocd-$(OPENOCD_VERSION).tar.bz2
> OPENOCD_SITE = http://downloads.sourceforge.net/project/openocd/openocd/$(OPENOCD_VERSION)
>
> -OPENOCD_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -std=gnu99"
> +OPENOCD_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -std=gnu99" \
> + $(if $(BR2_PACKAGE_LIBFTDI),ac_cv_search_ftdi_new=yes)
I don't really like this proposal. The test works just fine on
ARM/shared library, and appears to fail only on Blackfin/FLAT. The
config.log contains:
configure:14862: checking for library containing ftdi_new
configure:14893: /home/thomas/projets/buildroot/output/host/usr/bin/bfin-uclinux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wl,-elf2flt -static -std=gnu99 -I/home/tho
mas/projets/buildroot/output/host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -elf2flt -static conftest.c -L/home/thomas/projets/bu
ildroot/output/host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/lib -lftdi -lusb >&5
/home/thomas/projets/buildroot/output/host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/lib/libusb.a(libusb_la-core.o): In function `_usb_detach_kernel_driver_np':
core.c:(.text+0x96): undefined reference to `_libusb_detach_kernel_driver'
/home/thomas/projets/buildroot/output/host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/lib/libusb.a(libusb_la-core.o): In function `_usb_get_driver_np':
core.c:(.text+0xee): undefined reference to `_libusb_kernel_driver_active'
/home/thomas/projets/buildroot/output/host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/lib/libusb.a(libusb_la-core.o): In function `_usb_get_descriptor_by_endpoint':
core.c:(.text+0x16a): undefined reference to `_libusb_control_transfer'
[... more of such errors...]
So, I'd prefer to see a solution that actually solves the missing
undefined references, rather than working around this by passing
ac_cv_search_ftdi_new. Or at least an explanation giving the details as
to why passing ac_cv_search_ftdi_new is the appropriate solution for
the problem.
I'll mark your patch as Changes Requested. Can you submit an updated
version with either more details, or a better solution?
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH 3/3] package/openocd: fix libftdi mis-detection
2015-01-03 20:39 ` Thomas Petazzoni
@ 2015-01-05 20:08 ` Samuel Martin
0 siblings, 0 replies; 7+ messages in thread
From: Samuel Martin @ 2015-01-05 20:08 UTC (permalink / raw)
To: buildroot
Hi all,
On Sat, Jan 3, 2015 at 9:39 PM, Thomas Petazzoni
<thomas.petazzoni@free-electrons.com> wrote:
> Dear Samuel Martin,
>
> On Fri, 2 Jan 2015 22:19:28 +0100, Samuel Martin wrote:
>> By-pass failing ac_search_libs check when libftdi is enabled.
>>
>> Fixes:
>> http://autobuild.buildroot.org/results/e90/e90b4d5ad79d99487f21c9d18581e8eba7034501/
>>
>> Signed-off-by: Samuel Martin <s.martin49@gmail.com>
>> ---
>> package/openocd/openocd.mk | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/package/openocd/openocd.mk b/package/openocd/openocd.mk
>> index ad1f95b..34a2bbd 100644
>> --- a/package/openocd/openocd.mk
>> +++ b/package/openocd/openocd.mk
>> @@ -8,7 +8,8 @@ OPENOCD_VERSION = 0.8.0
>> OPENOCD_SOURCE = openocd-$(OPENOCD_VERSION).tar.bz2
>> OPENOCD_SITE = http://downloads.sourceforge.net/project/openocd/openocd/$(OPENOCD_VERSION)
>>
>> -OPENOCD_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -std=gnu99"
>> +OPENOCD_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -std=gnu99" \
>> + $(if $(BR2_PACKAGE_LIBFTDI),ac_cv_search_ftdi_new=yes)
>
> I don't really like this proposal. The test works just fine on
> ARM/shared library, and appears to fail only on Blackfin/FLAT. The
> config.log contains:
>
> configure:14862: checking for library containing ftdi_new
> configure:14893: /home/thomas/projets/buildroot/output/host/usr/bin/bfin-uclinux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wl,-elf2flt -static -std=gnu99 -I/home/tho
> mas/projets/buildroot/output/host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/include -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -elf2flt -static conftest.c -L/home/thomas/projets/bu
> ildroot/output/host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/lib -lftdi -lusb >&5
> /home/thomas/projets/buildroot/output/host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/lib/libusb.a(libusb_la-core.o): In function `_usb_detach_kernel_driver_np':
> core.c:(.text+0x96): undefined reference to `_libusb_detach_kernel_driver'
> /home/thomas/projets/buildroot/output/host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/lib/libusb.a(libusb_la-core.o): In function `_usb_get_driver_np':
> core.c:(.text+0xee): undefined reference to `_libusb_kernel_driver_active'
> /home/thomas/projets/buildroot/output/host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/lib/libusb.a(libusb_la-core.o): In function `_usb_get_descriptor_by_endpoint':
> core.c:(.text+0x16a): undefined reference to `_libusb_control_transfer'
> [... more of such errors...]
>
> So, I'd prefer to see a solution that actually solves the missing
> undefined references, rather than working around this by passing
> ac_cv_search_ftdi_new. Or at least an explanation giving the details as
> to why passing ac_cv_search_ftdi_new is the appropriate solution for
> the problem.
>
> I'll mark your patch as Changes Requested. Can you submit an updated
> version with either more details, or a better solution?
>
> Thanks!
>
> Thomas
> --
> Thomas Petazzoni, CTO, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com
Well, after further investigation, this error seems caused by the "_"
prefix prepended to each symbol on BlackFin.
When forcing the test result to pass the configuration, the full build succeeds.
<snip>
[...]
libtool: link: /home/system/src/tmp/br/abo/openocd-e90/host/usr/bin/bfin-uclinux-gcc
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os
-Wl,-elf2flt -static -std=gnu99 -Wall -Wstrict-prototypes
-Wformat-security -Wshadow -Wextra -Wno-unused-parameter
-Wbad-function-cast -Wcast-align -Wredundant-decls -elf2flt -static -o
openocd main.o ./.libs/libopenocd.a
-L/home/system/src/tmp/br/abo/openocd-e90/host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/lib
/home/system/src/tmp/br/abo/openocd-e90/host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/lib/libftdi.a
/home/system/src/tmp/br/abo/openocd-e90/host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/lib/libusb.a
/home/system/src/tmp/br/abo/openocd-e90/host/usr/bfin-buildroot-uclinux-uclibc/sysroot/usr/lib/libusb-1.0.a
../jimtcl/libjim.a -lm -pthread
</snip>
The most noticeable differences between the autotools check and the
build command are:
- the build command uses libtool, whereas the autotools check does not;
- the build command uses full path to libftdi.a and libusb.a (from the
staging tree), whereas the autotools check uses:
-L$(STAGING_DIR)/usr/lib -lftdi -lusb
Could this behavior result from some libtool trickery?
Note that, in such a case, we usually mark the package as not
available on bfin [1-2].
I think I'll do the same for openocd.
[1] http://git.buildroot.net/buildroot/commit/?id=b1cf2b21dd9e2283f9020e3a5ac9ac35f8855c1a
[2] http://git.buildroot.net/buildroot/commit/?id=7f5fec620101dba2e97a08d7e61640aa39a3c3f0
Regards,
--
Samuel
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH 1/3] package/openocd: explicitly disable unselected adapters
2015-01-02 21:19 [Buildroot] [PATCH 1/3] package/openocd: explicitly disable unselected adapters Samuel Martin
2015-01-02 21:19 ` [Buildroot] [PATCH 2/3] package/openocd: disable aice programmer on non-MMU architecture Samuel Martin
2015-01-02 21:19 ` [Buildroot] [PATCH 3/3] package/openocd: fix libftdi mis-detection Samuel Martin
@ 2015-01-03 20:35 ` Thomas Petazzoni
2 siblings, 0 replies; 7+ messages in thread
From: Thomas Petazzoni @ 2015-01-03 20:35 UTC (permalink / raw)
To: buildroot
Dear Samuel Martin,
On Fri, 2 Jan 2015 22:19:26 +0100, Samuel Martin wrote:
> Some adapters are automatically enabled, but may not be built because of
> missing (archecture) dependencies. So, just set the options symetrically.
>
> Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Applied, thanks.
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-01-05 20:08 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-01-02 21:19 [Buildroot] [PATCH 1/3] package/openocd: explicitly disable unselected adapters Samuel Martin
2015-01-02 21:19 ` [Buildroot] [PATCH 2/3] package/openocd: disable aice programmer on non-MMU architecture Samuel Martin
2015-01-03 20:35 ` Thomas Petazzoni
2015-01-02 21:19 ` [Buildroot] [PATCH 3/3] package/openocd: fix libftdi mis-detection Samuel Martin
2015-01-03 20:39 ` Thomas Petazzoni
2015-01-05 20:08 ` Samuel Martin
2015-01-03 20:35 ` [Buildroot] [PATCH 1/3] package/openocd: explicitly disable unselected adapters Thomas Petazzoni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox