* [Buildroot] [PATCH 1/1] Raspberry PI 3 kernel, firmware and dtb update
@ 2016-03-31 10:51 Ubaldo Porcheddu
2016-04-19 20:45 ` Peter Korsgaard
0 siblings, 1 reply; 8+ messages in thread
From: Ubaldo Porcheddu @ 2016-03-31 10:51 UTC (permalink / raw)
To: buildroot
Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
---
board/raspberrypi/genimage-raspberrypi2.cfg | 1 +
configs/raspberrypi2_defconfig | 4 ++--
package/rpi-firmware/rpi-firmware.mk | 2 +-
3 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/board/raspberrypi/genimage-raspberrypi2.cfg b/board/raspberrypi/genimage-raspberrypi2.cfg
index 443c821..453fb00 100644
--- a/board/raspberrypi/genimage-raspberrypi2.cfg
+++ b/board/raspberrypi/genimage-raspberrypi2.cfg
@@ -2,6 +2,7 @@ image boot.vfat {
vfat {
files = {
"bcm2709-rpi-2-b.dtb",
+ "bcm2710-rpi-3-b.dtb",
"rpi-firmware/bootcode.bin",
"rpi-firmware/cmdline.txt",
"rpi-firmware/config.txt",
diff --git a/configs/raspberrypi2_defconfig b/configs/raspberrypi2_defconfig
index ce41ee3..b77db14 100644
--- a/configs/raspberrypi2_defconfig
+++ b/configs/raspberrypi2_defconfig
@@ -13,13 +13,13 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d33d0293e245badc4ca6ede3984d8bb8ea63cb1a"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="20fe468af4bb40fec0f81753da4b20a8bfc259c9"
BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
BR2_LINUX_KERNEL_ZIMAGE=y
# Build the DTB from the kernel sources
BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b bcm2710-rpi-3-b"
BR2_PACKAGE_RPI_FIRMWARE=y
# BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set
diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
index 291da3a..8476678 100644
--- a/package/rpi-firmware/rpi-firmware.mk
+++ b/package/rpi-firmware/rpi-firmware.mk
@@ -4,7 +4,7 @@
#
################################################################################
-RPI_FIRMWARE_VERSION = 8b4e5482b52e6fb438dddc0d88ba0ba8d44af54b
+RPI_FIRMWARE_VERSION = 951799bbcd795ddf27769d14acf4813fdcbe53dc
RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
RPI_FIRMWARE_LICENSE = BSD-3c
RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Buildroot] [PATCH 1/1] Raspberry PI 3 kernel, firmware and dtb update
2016-03-31 10:51 [Buildroot] [PATCH 1/1] Raspberry PI 3 kernel, firmware and dtb update Ubaldo Porcheddu
@ 2016-04-19 20:45 ` Peter Korsgaard
2016-04-19 21:33 ` Yann E. MORIN
0 siblings, 1 reply; 8+ messages in thread
From: Peter Korsgaard @ 2016-04-19 20:45 UTC (permalink / raw)
To: buildroot
>>>>> "Ubaldo" == Ubaldo Porcheddu <ubaldo@eja.it> writes:
> Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
> ---
> board/raspberrypi/genimage-raspberrypi2.cfg | 1 +
> configs/raspberrypi2_defconfig | 4 ++--
> package/rpi-firmware/rpi-firmware.mk | 2 +-
> 3 files changed, 4 insertions(+), 3 deletions(-)
Thanks for the patch, but can you instead split it up 2 seperate
patches (with sensible descriptions) - One bumping the rpi-firmware
version and one updating the rpi2 config to also support rpi3.
The rpi3 afaik uses a different serial port than rpi2. How will that
work if we use the same defconfig for both boards? Perhaps it makes more
sense to have a seperate raspberrypi3_defconfig?
-
> diff --git a/board/raspberrypi/genimage-raspberrypi2.cfg b/board/raspberrypi/genimage-raspberrypi2.cfg
> index 443c821..453fb00 100644
> --- a/board/raspberrypi/genimage-raspberrypi2.cfg
> +++ b/board/raspberrypi/genimage-raspberrypi2.cfg
> @@ -2,6 +2,7 @@ image boot.vfat {
> vfat {
> files = {
> "bcm2709-rpi-2-b.dtb",
> + "bcm2710-rpi-3-b.dtb",
> "rpi-firmware/bootcode.bin",
> "rpi-firmware/cmdline.txt",
> "rpi-firmware/config.txt",
> diff --git a/configs/raspberrypi2_defconfig b/configs/raspberrypi2_defconfig
> index ce41ee3..b77db14 100644
> --- a/configs/raspberrypi2_defconfig
> +++ b/configs/raspberrypi2_defconfig
> @@ -13,13 +13,13 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_GIT=y
> BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
> -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d33d0293e245badc4ca6ede3984d8bb8ea63cb1a"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="20fe468af4bb40fec0f81753da4b20a8bfc259c9"
> BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
> BR2_LINUX_KERNEL_ZIMAGE=y
> # Build the DTB from the kernel sources
> BR2_LINUX_KERNEL_DTS_SUPPORT=y
> -BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b"
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b bcm2710-rpi-3-b"
> BR2_PACKAGE_RPI_FIRMWARE=y
> # BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set
> diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
> index 291da3a..8476678 100644
> --- a/package/rpi-firmware/rpi-firmware.mk
> +++ b/package/rpi-firmware/rpi-firmware.mk
> @@ -4,7 +4,7 @@
> #
> ################################################################################
> -RPI_FIRMWARE_VERSION = 8b4e5482b52e6fb438dddc0d88ba0ba8d44af54b
> +RPI_FIRMWARE_VERSION = 951799bbcd795ddf27769d14acf4813fdcbe53dc
> RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
> RPI_FIRMWARE_LICENSE = BSD-3c
> RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
> --
> 1.9.1
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 8+ messages in thread* [Buildroot] [PATCH 1/1] Raspberry PI 3 kernel, firmware and dtb update
2016-04-19 20:45 ` Peter Korsgaard
@ 2016-04-19 21:33 ` Yann E. MORIN
2016-04-20 7:08 ` Peter Korsgaard
0 siblings, 1 reply; 8+ messages in thread
From: Yann E. MORIN @ 2016-04-19 21:33 UTC (permalink / raw)
To: buildroot
Ubaldo, Peter, All,
On 2016-04-19 22:45 +0200, Peter Korsgaard spake thusly:
> >>>>> "Ubaldo" == Ubaldo Porcheddu <ubaldo@eja.it> writes:
>
> > Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
> > ---
> > board/raspberrypi/genimage-raspberrypi2.cfg | 1 +
> > configs/raspberrypi2_defconfig | 4 ++--
> > package/rpi-firmware/rpi-firmware.mk | 2 +-
> > 3 files changed, 4 insertions(+), 3 deletions(-)
>
> Thanks for the patch, but can you instead split it up 2 seperate
> patches (with sensible descriptions) - One bumping the rpi-firmware
> version and one updating the rpi2 config to also support rpi3.
>
> The rpi3 afaik uses a different serial port than rpi2. How will that
> work if we use the same defconfig for both boards? Perhaps it makes more
> sense to have a seperate raspberrypi3_defconfig?
Yes, expecially since the CPU is not the same, andthat we may^Wwill one
day have it run in 64-bit mode (one can dream, no?).
So yes, make it a separate defconfig, please.
Regards,
Yann E. MORIN.
> > diff --git a/board/raspberrypi/genimage-raspberrypi2.cfg b/board/raspberrypi/genimage-raspberrypi2.cfg
> > index 443c821..453fb00 100644
> > --- a/board/raspberrypi/genimage-raspberrypi2.cfg
> > +++ b/board/raspberrypi/genimage-raspberrypi2.cfg
> > @@ -2,6 +2,7 @@ image boot.vfat {
> > vfat {
> > files = {
> > "bcm2709-rpi-2-b.dtb",
> > + "bcm2710-rpi-3-b.dtb",
> > "rpi-firmware/bootcode.bin",
> > "rpi-firmware/cmdline.txt",
> > "rpi-firmware/config.txt",
> > diff --git a/configs/raspberrypi2_defconfig b/configs/raspberrypi2_defconfig
> > index ce41ee3..b77db14 100644
> > --- a/configs/raspberrypi2_defconfig
> > +++ b/configs/raspberrypi2_defconfig
> > @@ -13,13 +13,13 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
> > BR2_LINUX_KERNEL=y
> > BR2_LINUX_KERNEL_CUSTOM_GIT=y
> > BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
> > -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d33d0293e245badc4ca6ede3984d8bb8ea63cb1a"
> > +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="20fe468af4bb40fec0f81753da4b20a8bfc259c9"
> > BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
> > BR2_LINUX_KERNEL_ZIMAGE=y
>
> > # Build the DTB from the kernel sources
> > BR2_LINUX_KERNEL_DTS_SUPPORT=y
> > -BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b"
> > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b bcm2710-rpi-3-b"
>
> > BR2_PACKAGE_RPI_FIRMWARE=y
> > # BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set
> > diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk
> > index 291da3a..8476678 100644
> > --- a/package/rpi-firmware/rpi-firmware.mk
> > +++ b/package/rpi-firmware/rpi-firmware.mk
> > @@ -4,7 +4,7 @@
> > #
> > ################################################################################
>
> > -RPI_FIRMWARE_VERSION = 8b4e5482b52e6fb438dddc0d88ba0ba8d44af54b
> > +RPI_FIRMWARE_VERSION = 951799bbcd795ddf27769d14acf4813fdcbe53dc
> > RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
> > RPI_FIRMWARE_LICENSE = BSD-3c
> > RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
> > --
> > 1.9.1
>
> > _______________________________________________
> > buildroot mailing list
> > buildroot at busybox.net
> > http://lists.busybox.net/mailman/listinfo/buildroot
>
>
> --
> Bye, Peter Korsgaard
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 8+ messages in thread* [Buildroot] [PATCH 1/1] Raspberry PI 3 kernel, firmware and dtb update
2016-04-19 21:33 ` Yann E. MORIN
@ 2016-04-20 7:08 ` Peter Korsgaard
2016-04-20 8:37 ` Ubaldo Porcheddu
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Peter Korsgaard @ 2016-04-20 7:08 UTC (permalink / raw)
To: buildroot
>>>>> "Yann" == Yann E MORIN <yann.morin.1998@free.fr> writes:
>> The rpi3 afaik uses a different serial port than rpi2. How will that
>> work if we use the same defconfig for both boards? Perhaps it makes more
>> sense to have a seperate raspberrypi3_defconfig?
> Yes, expecially since the CPU is not the same, andthat we may^Wwill one
> day have it run in 64-bit mode (one can dream, no?).
Yeah. I don't know about the rpi foundation, but there seems to be quite
some aarch64 activity around it in mainline U-Boot/Linux.
With the recent vc4 work it might make sense to add rpi defconfigs using
mainline as well?
--
Venlig hilsen,
Peter Korsgaard
^ permalink raw reply [flat|nested] 8+ messages in thread* [Buildroot] [PATCH 1/1] Raspberry PI 3 kernel, firmware and dtb update
2016-04-20 7:08 ` Peter Korsgaard
@ 2016-04-20 8:37 ` Ubaldo Porcheddu
2016-04-20 14:25 ` Gustavo Zacarias
2016-04-23 16:53 ` Yann E. MORIN
2 siblings, 0 replies; 8+ messages in thread
From: Ubaldo Porcheddu @ 2016-04-20 8:37 UTC (permalink / raw)
To: buildroot
Hi,
Il 2016-04-20 08:08 Peter Korsgaard ha scritto:
>>>>>> "Yann" == Yann E MORIN <yann.morin.1998@free.fr> writes:
>
> >> The rpi3 afaik uses a different serial port than rpi2. How will
> that
> >> work if we use the same defconfig for both boards? Perhaps it makes
> more
> >> sense to have a seperate raspberrypi3_defconfig?
>
> > Yes, expecially since the CPU is not the same, andthat we may^Wwill
> one
> > day have it run in 64-bit mode (one can dream, no?).
>
> Yeah. I don't know about the rpi foundation, but there seems to be
> quite
> some aarch64 activity around it in mainline U-Boot/Linux.
>
> With the recent vc4 work it might make sense to add rpi defconfigs
> using
> mainline as well?
I am going to submit a patch right now with just the firmware upgrade
and I will then try a separate rpi3 defconfig to start with.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH 1/1] Raspberry PI 3 kernel, firmware and dtb update
2016-04-20 7:08 ` Peter Korsgaard
2016-04-20 8:37 ` Ubaldo Porcheddu
@ 2016-04-20 14:25 ` Gustavo Zacarias
2016-04-23 8:36 ` Peter Korsgaard
2016-04-23 16:53 ` Yann E. MORIN
2 siblings, 1 reply; 8+ messages in thread
From: Gustavo Zacarias @ 2016-04-20 14:25 UTC (permalink / raw)
To: buildroot
On 20/04/16 04:08, Peter Korsgaard wrote:
> Yeah. I don't know about the rpi foundation, but there seems to be quite
> some aarch64 activity around it in mainline U-Boot/Linux.
>
> With the recent vc4 work it might make sense to add rpi defconfigs using
> mainline as well?
I have a WIP rpi2 open defconfig, however the kernel part eludes me a
bit, plain vanilla doesn't seem ready for vc4 right away and i'm
probably missing some patches/pull to complete enable it (symptom: oops).
I can share in private if anybody is interested in picking up/trying to fix.
Regards.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH 1/1] Raspberry PI 3 kernel, firmware and dtb update
2016-04-20 14:25 ` Gustavo Zacarias
@ 2016-04-23 8:36 ` Peter Korsgaard
0 siblings, 0 replies; 8+ messages in thread
From: Peter Korsgaard @ 2016-04-23 8:36 UTC (permalink / raw)
To: buildroot
>>>>> "Gustavo" == Gustavo Zacarias <gustavo@zacarias.com.ar> writes:
> On 20/04/16 04:08, Peter Korsgaard wrote:
>> Yeah. I don't know about the rpi foundation, but there seems to be quite
>> some aarch64 activity around it in mainline U-Boot/Linux.
>>
>> With the recent vc4 work it might make sense to add rpi defconfigs using
>> mainline as well?
> I have a WIP rpi2 open defconfig, however the kernel part eludes me a
> bit, plain vanilla doesn't seem ready for vc4 right away and i'm
> probably missing some patches/pull to complete enable it (symptom:
> oops).
> I can share in private if anybody is interested in picking up/trying to fix.
Ok, thanks. I don't actually have rpi2, so I'll leave it until we have
something working.
--
Venlig hilsen,
Peter Korsgaard
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH 1/1] Raspberry PI 3 kernel, firmware and dtb update
2016-04-20 7:08 ` Peter Korsgaard
2016-04-20 8:37 ` Ubaldo Porcheddu
2016-04-20 14:25 ` Gustavo Zacarias
@ 2016-04-23 16:53 ` Yann E. MORIN
2 siblings, 0 replies; 8+ messages in thread
From: Yann E. MORIN @ 2016-04-23 16:53 UTC (permalink / raw)
To: buildroot
Ubaldo, All,
On 2016-04-20 09:08 +0200, Peter Korsgaard spake thusly:
> The rpi3 afaik uses a different serial port than rpi2. How will that
> work if we use the same defconfig for both boards? Perhaps it makes more
> sense to have a seperate raspberrypi3_defconfig?
BTW, the serial port that is available on the 40-pin header on RPi3 is
ttyS0 (I forgot to mention that previously; not sure it was figured out
yet, so better re-hash it just in case).
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-04-23 16:53 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-03-31 10:51 [Buildroot] [PATCH 1/1] Raspberry PI 3 kernel, firmware and dtb update Ubaldo Porcheddu
2016-04-19 20:45 ` Peter Korsgaard
2016-04-19 21:33 ` Yann E. MORIN
2016-04-20 7:08 ` Peter Korsgaard
2016-04-20 8:37 ` Ubaldo Porcheddu
2016-04-20 14:25 ` Gustavo Zacarias
2016-04-23 8:36 ` Peter Korsgaard
2016-04-23 16:53 ` Yann E. MORIN
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox