[Buildroot] [PATCH 00/10] Bump NXP package versions

[Buildroot] [PATCH 00/10] Bump NXP package versions

[Andrew Webster]

The following packages were renamed:
 libfslcodec -> imx-codec
 libfslparser -> imx-parser
 libfslvpuwrap -> imx-vpuwrap
In addition to renaming, I also moved them into the freescale-imx directory
which seems consistent with other similarily named packages (although that
directory may be due for a rename now too).  Not sure if this was appropriate
or not.

Andrew Webster (10):
  firmware-imx: bump to version 5.4
  gst1-imx: bump to version 0.12.1
  imx-vpu: bump to version 5.4.33
  imx-codec: rename from libfslcodec and bump version to 4.0.9
  imx-parser: rename from libfslparser and bump version to 4.0.9
  imx-vpuwrap: rename from libfslvpuwrap and bump version to 1.0.65
  imx-gpu-viv: bump version to 5.0.11-p8.3
  libimxvpuapi: bump version to 0.10.2
  imx-lib: bump version to 5.4
  xdriver_xf86-video-imx-viv: bump version to 5.0.11-p8.3

 Config.in.legacy                                   | 21 ++++++
 package/Config.in                                  |  3 -
 package/freescale-imx/Config.in                    |  3 +
 .../freescale-imx/firmware-imx/firmware-imx.hash   |  2 +-
 package/freescale-imx/firmware-imx/firmware-imx.mk |  5 +-
 .../imx-codec}/Config.in                           |  6 +-
 package/freescale-imx/imx-codec/imx-codec.hash     |  2 +
 package/freescale-imx/imx-codec/imx-codec.mk       | 23 ++++++
 package/freescale-imx/imx-gpu-viv/Config.in        |  6 +-
 package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash |  4 +-
 package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk   | 10 +--
 package/freescale-imx/imx-lib/imx-lib.hash         |  2 +-
 package/freescale-imx/imx-lib/imx-lib.mk           |  2 +-
 .../imx-parser}/Config.in                          |  4 +-
 package/freescale-imx/imx-parser/imx-parser.hash   |  2 +
 package/freescale-imx/imx-parser/imx-parser.mk     | 23 ++++++
 package/freescale-imx/imx-vpu/imx-vpu.hash         |  2 +-
 package/freescale-imx/imx-vpu/imx-vpu.mk           |  4 +-
 .../imx-vpuwrap}/Config.in                         |  8 +-
 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash |  2 +
 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk   | 21 ++++++
 package/gstreamer/gst-fsl-plugins/Config.in        |  6 +-
 .../gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk   |  2 +-
 package/gstreamer1/gst1-imx/Config.in              |  2 +-
 package/gstreamer1/gst1-imx/gst1-imx.hash          |  2 +-
 package/gstreamer1/gst1-imx/gst1-imx.mk            |  6 +-
 package/libfslcodec/libfslcodec.hash               |  2 -
 package/libfslcodec/libfslcodec.mk                 | 23 ------
 package/libfslparser/libfslparser.hash             |  2 -
 package/libfslparser/libfslparser.mk               | 23 ------
 package/libfslvpuwrap/libfslvpuwrap.hash           |  2 -
 package/libfslvpuwrap/libfslvpuwrap.mk             | 21 ------
 package/libimxvpuapi/libimxvpuapi.hash             |  2 +-
 package/libimxvpuapi/libimxvpuapi.mk               |  2 +-
 .../0001-Remove-dix-internal-header-usage.patch    | 31 --------
 ...001-Stop-using-Git-to-write-local-version.patch | 87 ++++++++++++++++++++++
 .../xdriver_xf86-video-imx-viv.hash                |  3 +-
 .../xdriver_xf86-video-imx-viv.mk                  |  2 +-
 38 files changed, 223 insertions(+), 150 deletions(-)
 rename package/{libfslcodec => freescale-imx/imx-codec}/Config.in (75%)
 create mode 100644 package/freescale-imx/imx-codec/imx-codec.hash
 create mode 100644 package/freescale-imx/imx-codec/imx-codec.mk
 rename package/{libfslparser => freescale-imx/imx-parser}/Config.in (78%)
 create mode 100644 package/freescale-imx/imx-parser/imx-parser.hash
 create mode 100644 package/freescale-imx/imx-parser/imx-parser.mk
 rename package/{libfslvpuwrap => freescale-imx/imx-vpuwrap}/Config.in (69%)
 create mode 100644 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash
 create mode 100644 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk
 delete mode 100644 package/libfslcodec/libfslcodec.hash
 delete mode 100644 package/libfslcodec/libfslcodec.mk
 delete mode 100644 package/libfslparser/libfslparser.hash
 delete mode 100644 package/libfslparser/libfslparser.mk
 delete mode 100644 package/libfslvpuwrap/libfslvpuwrap.hash
 delete mode 100644 package/libfslvpuwrap/libfslvpuwrap.mk
 delete mode 100644 package/x11r7/xdriver_xf86-video-imx-viv/0001-Remove-dix-internal-header-usage.patch
 create mode 100644 package/x11r7/xdriver_xf86-video-imx-viv/0001-Stop-using-Git-to-write-local-version.patch

-- 
1.9.1

[Buildroot] [PATCH 01/10] firmware-imx: bump to version 5.4

[Andrew Webster]

Changelog:
- Upgrade to FW v3.1.1_r46072
- v3.1.1_r46070 plus 2 patches 391/392
- FSLARIK-391 [Decoder/H.264] VPU is always busy when decoding an
erroneous H264 bitstream
- FSLARIK-392 [Decoder/VC1] VPU outputs only 1 picture
- Change to the format of Linux coda driver firmware

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/dbb8773

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
 package/freescale-imx/firmware-imx/firmware-imx.hash | 2 +-
 package/freescale-imx/firmware-imx/firmware-imx.mk   | 5 ++---
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/package/freescale-imx/firmware-imx/firmware-imx.hash b/package/freescale-imx/firmware-imx/firmware-imx.hash
index a5bc82c..a6e5bd5 100644
--- a/package/freescale-imx/firmware-imx/firmware-imx.hash
+++ b/package/freescale-imx/firmware-imx/firmware-imx.hash
@@ -1 +1 @@
-sha256 fd14c3666eb3c12f4f2665d95caf383bb1d0277bb12e2de28fefc8d1230604f2  firmware-imx-5.3.bin
+sha256 c5bd4bff48cce9715a5d6d2c190ff3cd2262c7196f7facb9b0eda231c92cc223  firmware-imx-5.4.bin
diff --git a/package/freescale-imx/firmware-imx/firmware-imx.mk b/package/freescale-imx/firmware-imx/firmware-imx.mk
index 8f81c57..1893929 100644
--- a/package/freescale-imx/firmware-imx/firmware-imx.mk
+++ b/package/freescale-imx/firmware-imx/firmware-imx.mk
@@ -4,12 +4,11 @@
 #
 ################################################################################
 
-FIRMWARE_IMX_VERSION = 5.3
+FIRMWARE_IMX_VERSION = 5.4
 FIRMWARE_IMX_SITE = $(FREESCALE_IMX_SITE)
 FIRMWARE_IMX_SOURCE = firmware-imx-$(FIRMWARE_IMX_VERSION).bin
 
-FIRMWARE_IMX_LICENSE = Freescale Semiconductor Software License Agreement, \
-	Atheros license (ath6k)
+FIRMWARE_IMX_LICENSE = NXP Semiconductor Software License Agreement
 FIRMWARE_IMX_LICENSE_FILES = EULA COPYING
 FIRMWARE_IMX_REDISTRIBUTE = NO
 
-- 
1.9.1

[Buildroot] [PATCH 01/10] firmware-imx: bump to version 5.4

[Gary Bisson]

Andrew, All,

On Fri, Jun 3, 2016 at 3:10 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> - Upgrade to FW v3.1.1_r46072
> - v3.1.1_r46070 plus 2 patches 391/392
> - FSLARIK-391 [Decoder/H.264] VPU is always busy when decoding an
> erroneous H264 bitstream
> - FSLARIK-392 [Decoder/VC1] VPU outputs only 1 picture
> - Change to the format of Linux coda driver firmware

Hmm, that's cool because it means the firmware can now be used by
mainline kernel seamlessly, but it also means that it won't work on
any kernel < 4.1.15. Do you confirm you've tried it on 4.1.15 kernel
only?

This means that updating defconfig should also be part of this series
in my opinion,@least for the NXP platforms.

> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/dbb8773

Please share how you've tested the VPU firmware for instance.

Regards,
Gary

[Buildroot] [PATCH 01/10] firmware-imx: bump to version 5.4

[Andrew Webster]

> -----Original Message-----
> From: Gary Bisson [mailto:gary.bisson at boundarydevices.com]
> Sent: Monday, June 06, 2016 10:33 AM
> To: Andrew Webster
> Cc: buildroot at buildroot.org
> Subject: Re: [Buildroot] [PATCH 01/10] firmware-imx: bump to version 5.4
> 
> Andrew, All,
> 
> On Fri, Jun 3, 2016 at 3:10 PM, Andrew Webster <awebster@arcx.com>
> wrote:
> > Changelog:
> > - Upgrade to FW v3.1.1_r46072
> > - v3.1.1_r46070 plus 2 patches 391/392
> > - FSLARIK-391 [Decoder/H.264] VPU is always busy when decoding an
> > erroneous H264 bitstream
> > - FSLARIK-392 [Decoder/VC1] VPU outputs only 1 picture
> > - Change to the format of Linux coda driver firmware
> 
> Hmm, that's cool because it means the firmware can now be used by
> mainline kernel seamlessly, but it also means that it won't work on any kernel
> < 4.1.15. Do you confirm you've tried it on 4.1.15 kernel only?

Correct, tested against the 4.1.15 kernel only.

> 
> This means that updating defconfig should also be part of this series in my
> opinion, at least for the NXP platforms.

What would be the verification plan for defconfig updates?  Build each one and check for build errors?

> 
> > This patch is based on the Yocto equivalent:
> > https://github.com/Freescale/meta-fsl-arm/commit/dbb8773
> 
> Please share how you've tested the VPU firmware for instance.

I followed the same tests from your previous version bumps (e.g. gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! matroskademux ! imxvpudec ! imxipuvideosink).  I can add the test(s) performed to the commit messages if you like.

> 
> Regards,
> Gary

[Buildroot] [PATCH 01/10] firmware-imx: bump to version 5.4

[Gary Bisson]

Andrew, All,

On Mon, Jun 6, 2016 at 7:12 PM, Andrew Webster <Awebster@arcx.com> wrote:
>> -----Original Message-----
>> From: Gary Bisson [mailto:gary.bisson at boundarydevices.com]
>> Sent: Monday, June 06, 2016 10:33 AM
>> To: Andrew Webster
>> Cc: buildroot at buildroot.org
>> Subject: Re: [Buildroot] [PATCH 01/10] firmware-imx: bump to version 5.4
>>
>> Andrew, All,
>>
>> On Fri, Jun 3, 2016 at 3:10 PM, Andrew Webster <awebster@arcx.com>
>> wrote:
>> > Changelog:
>> > - Upgrade to FW v3.1.1_r46072
>> > - v3.1.1_r46070 plus 2 patches 391/392
>> > - FSLARIK-391 [Decoder/H.264] VPU is always busy when decoding an
>> > erroneous H264 bitstream
>> > - FSLARIK-392 [Decoder/VC1] VPU outputs only 1 picture
>> > - Change to the format of Linux coda driver firmware
>>
>> Hmm, that's cool because it means the firmware can now be used by
>> mainline kernel seamlessly, but it also means that it won't work on any kernel
>> < 4.1.15. Do you confirm you've tried it on 4.1.15 kernel only?
>
> Correct, tested against the 4.1.15 kernel only.

I'll try but I'm pretty sure this won't work on 3.14.52.

>> This means that updating defconfig should also be part of this series in my
>> opinion, at least for the NXP platforms.
>
> What would be the verification plan for defconfig updates?  Build each one and check for build errors?

Yes a build check is sufficient, that is what I've been doing before.

>> > This patch is based on the Yocto equivalent:
>> > https://github.com/Freescale/meta-fsl-arm/commit/dbb8773
>>
>> Please share how you've tested the VPU firmware for instance.
>
> I followed the same tests from your previous version bumps (e.g. gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! matroskademux ! imxvpudec ! imxipuvideosink).  I can add the test(s) performed to the commit messages if you like.

Yes please, at least in the cover letter so anyone knows how to make
sure the package actually works.

Thanks,
Gary

[Buildroot] [PATCH 01/10] firmware-imx: bump to version 5.4

[Andrew Webster]

Gary,

>From: Gary Bisson [mailto:gary.bisson at boundarydevices.com] 
>Sent: Tuesday, June 07, 2016 3:37 AM
>
>>> Hmm, that's cool because it means the firmware can now be used by 
>>> mainline kernel seamlessly, but it also means that it won't work on 
>>> any kernel < 4.1.15. Do you confirm you've tried it on 4.1.15 kernel only?
>>
>> Correct, tested against the 4.1.15 kernel only.
>
>I'll try but I'm pretty sure this won't work on 3.14.52.

There will be a similar problem with the imx-gpu-viv package.  I believe that the kernel version and the gpu library need to match (correct me if I'm wrong).  This would mean that if either the kernel or imx-gpu-viv are updated without the other, things may not work properly at run-time.  I expect that the X-windows driver also needs to match the others.  So, no matter the order of the patches, run-time will be broken between some patches until others have been applied.

I am thinking to re-order the patches as follows:

 1. defconfig kernel version bump [NEW]
 2. kernel-module-imx-gpu-viv [NEW]
 3. imx-gpu-viv bump
 4. xdriver_xf86-video-viv bump
 5. firmware-imx bump
 6. gst1-imx bump
 7. imx-vpu bump
 8. imx-codec bump/rename
 9. imx-parser bump/rename
 10. imx-vpuwrap bump/rename
 11. libimxvpuapi bump
 12. imx-lib bump
 13. imx-kobs bump [NEW]

Does this make sense to you?

Thanks,
Andrew

[Buildroot] [PATCH 01/10] firmware-imx: bump to version 5.4

[Gary Bisson]

Andrew, All,

Le 8 juin 2016 7:33 PM, "Andrew Webster" <Awebster@arcx.com> a ?crit :
>
> Gary,
>
> >From: Gary Bisson [mailto:gary.bisson at boundarydevices.com]
> >Sent: Tuesday, June 07, 2016 3:37 AM
> >
> >>> Hmm, that's cool because it means the firmware can now be used by
> >>> mainline kernel seamlessly, but it also means that it won't work on
> >>> any kernel < 4.1.15. Do you confirm you've tried it on 4.1.15 kernel
only?
> >>
> >> Correct, tested against the 4.1.15 kernel only.
> >
> >I'll try but I'm pretty sure this won't work on 3.14.52.
>
> There will be a similar problem with the imx-gpu-viv package.  I believe
that the kernel version and the gpu library need to match (correct me if
I'm wrong).  This would mean that if either the kernel or imx-gpu-viv are
updated without the other, things may not work properly at run-time.  I
expect that the X-windows driver also needs to match the others.  So, no
matter the order of the patches, run-time will be broken between some
patches until others have been applied.

The difference is that there is nothing you can do about the VPU whereas
the graphics libraries always match the kernel module which can be built
against any kernel >= 3.10.53.

Also I don't mind the order that much, it is just that it makes more sense
to have graphics patches together and multimedia one on their own as they
are not dependent on each other.

> I am thinking to re-order the patches as follows:
>
>  1. defconfig kernel version bump [NEW]
>  2. kernel-module-imx-gpu-viv [NEW]
>  3. imx-gpu-viv bump
>  4. xdriver_xf86-video-viv bump
>  5. firmware-imx bump
>  6. gst1-imx bump
>  7. imx-vpu bump
>  8. imx-codec bump/rename
>  9. imx-parser bump/rename
>  10. imx-vpuwrap bump/rename
>  11. libimxvpuapi bump
>  12. imx-lib bump
>  13. imx-kobs bump [NEW]
>
> Does this make sense to you?

Yes that looks good to me.

Regards,
Gary
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20160608/c253546c/attachment.html>

[Buildroot] [PATCH 01/10] firmware-imx: bump to version 5.4

[Andrew Webster]

Gary,

> From: Gary Bisson [mailto:gary.bisson at boundarydevices.com]
> Sent: Tuesday, June 07, 2016 3:37 AM

> >> > This patch is based on the Yocto equivalent:
> >> > https://github.com/Freescale/meta-fsl-arm/commit/dbb8773
> >>
> >> Please share how you've tested the VPU firmware for instance.
> >
> > I followed the same tests from your previous version bumps (e.g. gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm
> ! matroskademux ! imxvpudec ! imxipuvideosink).  I can add the test(s) performed to the commit messages if you like.
> 
> Yes please, at least in the cover letter so anyone knows how to make sure the package actually works.
> 

Given that the gstreamer-0.10 plugins from NXP are no longer being updated, and don't seem to work with the new packages (or maybe I didn't configure things properly), do you know of another way to test the imx-codec, imx-parser, and imx-vpuwrap packages?

Andrew

[Buildroot] [PATCH 01/10] firmware-imx: bump to version 5.4

[Gary Bisson]

Andrew, All,

On Thu, Jun 9, 2016 at 11:18 PM, Andrew Webster <Awebster@arcx.com> wrote:
>
> Gary,
>
> > From: Gary Bisson [mailto:gary.bisson at boundarydevices.com]
> > Sent: Tuesday, June 07, 2016 3:37 AM
>
> > >> > This patch is based on the Yocto equivalent:
> > >> > https://github.com/Freescale/meta-fsl-arm/commit/dbb8773
> > >>
> > >> Please share how you've tested the VPU firmware for instance.
> > >
> > > I followed the same tests from your previous version bumps (e.g. gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm
> > ! matroskademux ! imxvpudec ! imxipuvideosink).  I can add the test(s) performed to the commit messages if you like.
> >
> > Yes please, at least in the cover letter so anyone knows how to make sure the package actually works.
> >
>
> Given that the gstreamer-0.10 plugins from NXP are no longer being updated, and don't seem to work with the new packages (or maybe I didn't configure things properly), do you know of another way to test the imx-codec, imx-parser, and imx-vpuwrap packages?

Why do you say it doesn't seem to work with new packages? Up until now
it was still working, do you have a build failure? If so, we need to
deprecate the gst-fsl-plugins of Gstreamer0.10.

Regarding the packages, yes right now they are only used by the
Gstreamer0.10 plugins. There's another Gstreamer1.0 plugin provided by
NXP that makes use of those packages but I've always preferred the
clean and open-source Gstreamer-imx implementation so I never bothered
integrating it (and don't plan to). If we have to deprecate the
Gstreamer0.10 FSL plugins, then we can ask ourselves the question as
to whether or not we should keep those packages.

Regards,
Gary

[Buildroot] [PATCH 01/10] firmware-imx: bump to version 5.4

[Andrew Webster]

> From: buildroot [mailto:buildroot-bounces at busybox.net] On Behalf Of Gary Bisson
> Sent: Friday, June 10, 2016 4:47 AM

> > > >> > This patch is based on the Yocto equivalent:
> > > >> > https://github.com/Freescale/meta-fsl-arm/commit/dbb8773
> > > >>
> > > >> Please share how you've tested the VPU firmware for instance.
> > > >
> > > > I followed the same tests from your previous version bumps (e.g.
> > > > gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm
> > > ! matroskademux ! imxvpudec ! imxipuvideosink).  I can add the test(s) performed to the commit messages if you like.
> > >
> > > Yes please, at least in the cover letter so anyone knows how to make sure the package actually works.
> > >
> >
> > Given that the gstreamer-0.10 plugins from NXP are no longer being updated, and don't seem to work with the new packages (or
> maybe I didn't configure things properly), do you know of another way to test the imx-codec, imx-parser, and imx-vpuwrap packages?
> 
> Why do you say it doesn't seem to work with new packages? Up until now it was still working, do you have a build failure? If so, we
> need to deprecate the gst-fsl-plugins of Gstreamer0.10.

The build was successful, but I was having run-time issues.  gst-launch-0.10 would start and claim to be playing, but I saw nothing.  There were VPU errors in the kernel log. 
This may have been a build failure of some kind, because after a full re-build, it now seems to be working.  I am still suspicious that there may be problem.

However, given that it builds, I guess there is no immediate need remove it.  Note that support was removed from Yocto in https://github.com/Freescale/meta-fsl-arm/commit/83b240e.

> Regarding the packages, yes right now they are only used by the
> Gstreamer0.10 plugins. There's another Gstreamer1.0 plugin provided by NXP that makes use of those packages but I've always
> preferred the clean and open-source Gstreamer-imx implementation so I never bothered integrating it (and don't plan to). If we have
> to deprecate the
> Gstreamer0.10 FSL plugins, then we can ask ourselves the question as to whether or not we should keep those packages.

I would think that these could be useful even without the gst0.10 plugins (e.g. for Kodi), but they would become more difficult to run-time test.

Andrew 

[Buildroot] [PATCH 02/10] gst1-imx: bump to version 0.12.1

[Andrew Webster]

Changelog:
* compositor: Rename ImxCompositor(Pad) to ImxVideoCompositor(Pad)
  This prevents conflicts if both the NXP plugins and the gstreamer-imx
  are installed in the same rootfs

* Add switches to wscript configuration to enable/disable plugins
  Until now, all plugins were built (unless their dependencies were
  missing). On some i.MX machines, some features are missing. For
  example, the i.MX7 has no VPU. To ensure deterministic builds, it is
  useful to selectively disable plugins in the build.

* ipu+pxp: : Fix deadlocks and incorrect logging in case of init error
  This was causing a freeze if for example one tries to use PxP elements
  on an i.MX6 Dual/Quad

* imxv4l2videosrc fixes and enhancements:
  * fixes to interlacing support (incl. workarounds for analog TV input)
  * remove format restriction in get_caps function
    this removes the limitation on I420 formats
  * simplified determination of fps (necessary due to driver limitations)

* eglvivsink: wayland: Do not commit before buffers are swapped
  This fixes eglSwapBuffer swaps with damaged frames

* Documentation additions
  Adds GPU memory leak notess to the FAQ

* vpu: encoder: Expose motion estimation range as property

* vpu: decoder: Drop output frame if its buffer cannot be allocated

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/cec4c47

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
 package/gstreamer1/gst1-imx/gst1-imx.hash | 2 +-
 package/gstreamer1/gst1-imx/gst1-imx.mk   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/package/gstreamer1/gst1-imx/gst1-imx.hash b/package/gstreamer1/gst1-imx/gst1-imx.hash
index 03e1729..ca47776 100644
--- a/package/gstreamer1/gst1-imx/gst1-imx.hash
+++ b/package/gstreamer1/gst1-imx/gst1-imx.hash
@@ -1,2 +1,2 @@
 # locally computed hash
-sha256 df34f080e24ac8f1619780aa5ad4e6ab1333f822cd2bf5fcb380b28c97248810  gst1-imx-0.12.0.tar.gz
+sha256 d8a7357bc575e22d0d19d6d7cf547bd69cad5fc47adb93f09ead41b0124353fa  gst1-imx-0.12.1.tar.gz
diff --git a/package/gstreamer1/gst1-imx/gst1-imx.mk b/package/gstreamer1/gst1-imx/gst1-imx.mk
index 650e097..8838110 100644
--- a/package/gstreamer1/gst1-imx/gst1-imx.mk
+++ b/package/gstreamer1/gst1-imx/gst1-imx.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-GST1_IMX_VERSION = 0.12.0
+GST1_IMX_VERSION = 0.12.1
 GST1_IMX_SITE = $(call github,Freescale,gstreamer-imx,$(GST1_IMX_VERSION))
 
 GST1_IMX_LICENSE = LGPLv2+
-- 
1.9.1

[Buildroot] [PATCH 02/10] gst1-imx: bump to version 0.12.1

[Gary Bisson]

Andrew, All,

On Fri, Jun 3, 2016 at 3:10 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> * compositor: Rename ImxCompositor(Pad) to ImxVideoCompositor(Pad)
>   This prevents conflicts if both the NXP plugins and the gstreamer-imx
>   are installed in the same rootfs
>
> * Add switches to wscript configuration to enable/disable plugins
>   Until now, all plugins were built (unless their dependencies were
>   missing). On some i.MX machines, some features are missing. For
>   example, the i.MX7 has no VPU. To ensure deterministic builds, it is
>   useful to selectively disable plugins in the build.

This update is actually very important, we can now explicitly select
which element we want to be built. As said to Baruch[1], I think this
package should be reworked more deeply in order to have a menu
allowing to select the elements to be built.

Since the switches to wscript configuration are brought by this
update, my opinion is that it should be done in one patch. I can take
care of it if you don't want to.

Regards,
Gary

[1]: http://patchwork.ozlabs.org/patch/611642/

[Buildroot] [PATCH 02/10] gst1-imx: bump to version 0.12.1

[Andrew Webster]

> -----Original Message-----
> From: Gary Bisson [mailto:gary.bisson at boundarydevices.com]
> Sent: Monday, June 06, 2016 10:33 AM
> To: Andrew Webster
> Cc: buildroot at buildroot.org
> Subject: Re: [Buildroot] [PATCH 02/10] gst1-imx: bump to version 0.12.1
> 
> Andrew, All,
> 
> On Fri, Jun 3, 2016 at 3:10 PM, Andrew Webster <awebster@arcx.com>
> wrote:
> > Changelog:
> > * compositor: Rename ImxCompositor(Pad) to ImxVideoCompositor(Pad)
> >   This prevents conflicts if both the NXP plugins and the gstreamer-imx
> >   are installed in the same rootfs
> >
> > * Add switches to wscript configuration to enable/disable plugins
> >   Until now, all plugins were built (unless their dependencies were
> >   missing). On some i.MX machines, some features are missing. For
> >   example, the i.MX7 has no VPU. To ensure deterministic builds, it is
> >   useful to selectively disable plugins in the build.
> 
> This update is actually very important, we can now explicitly select which
> element we want to be built. As said to Baruch[1], I think this package should
> be reworked more deeply in order to have a menu allowing to select the
> elements to be built.
> 
> Since the switches to wscript configuration are brought by this update, my
> opinion is that it should be done in one patch. I can take care of it if you don't
> want to.

I'll take a look to see what's required here and get back to you.

> 
> Regards,
> Gary
> 
> [1]: http://patchwork.ozlabs.org/patch/611642/

[Buildroot] [PATCH 02/10] gst1-imx: bump to version 0.12.1

[Thomas Petazzoni]

Hello,

On Mon, 6 Jun 2016 16:33:13 +0200, Gary Bisson wrote:

> Since the switches to wscript configuration are brought by this
> update, my opinion is that it should be done in one patch. I can take
> care of it if you don't want to.

Well, I would suggest to do the opposite: do the bump, and then make
improvements to the package that are made possible by the bump.

Of course, if it's impossible for some reason to separate these in two
patches, it should be done in only one patch.

But if the bump can be done without these additional improvement, they
should be separate changes.

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH 02/10] gst1-imx: bump to version 0.12.1

[Gary Bisson]

Thomas, All,

On Mon, Jun 6, 2016 at 10:28 PM, Thomas Petazzoni
<thomas.petazzoni@free-electrons.com> wrote:
> Hello,
>
> On Mon, 6 Jun 2016 16:33:13 +0200, Gary Bisson wrote:
>
>> Since the switches to wscript configuration are brought by this
>> update, my opinion is that it should be done in one patch. I can take
>> care of it if you don't want to.
>
> Well, I would suggest to do the opposite: do the bump, and then make
> improvements to the package that are made possible by the bump.
>
> Of course, if it's impossible for some reason to separate these in two
> patches, it should be done in only one patch.
>
> But if the bump can be done without these additional improvement, they
> should be separate changes.

It is possible, nothing prevents it I just thought it'd be better to
have everything in one patch.

In that case, I think the patch from Baruch should also be merged
before the rework.

Andrew, you can keep your patch as-is.
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>

Regards,
Gary

[Buildroot] [PATCH 03/10] imx-vpu: bump to version 5.4.33

[Andrew Webster]

Changelog:
VPU firmware has been changed to the format of Linux codec driver firmware.
Change VPU library to adapt to firmware format change.

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/f5e1056

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
 package/freescale-imx/imx-vpu/imx-vpu.hash | 2 +-
 package/freescale-imx/imx-vpu/imx-vpu.mk   | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/package/freescale-imx/imx-vpu/imx-vpu.hash b/package/freescale-imx/imx-vpu/imx-vpu.hash
index c828c2b..67ebaf2 100644
--- a/package/freescale-imx/imx-vpu/imx-vpu.hash
+++ b/package/freescale-imx/imx-vpu/imx-vpu.hash
@@ -1,2 +1,2 @@
 # Locally computed
-sha256	f11b91dcdb84bfefd3c88f10a9c1c1bc3420e4bbaadc38b9280fb52f7769eca8  imx-vpu-5.4.32.bin
+sha256	2e670ef2337a5dbe6c32fa07128ad9aad32afdbf472c23d44133245ec6a66d46  imx-vpu-5.4.33.bin
diff --git a/package/freescale-imx/imx-vpu/imx-vpu.mk b/package/freescale-imx/imx-vpu/imx-vpu.mk
index 949fefa..09ff5a8 100644
--- a/package/freescale-imx/imx-vpu/imx-vpu.mk
+++ b/package/freescale-imx/imx-vpu/imx-vpu.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-IMX_VPU_VERSION = 5.4.32
+IMX_VPU_VERSION = 5.4.33
 IMX_VPU_SITE = $(FREESCALE_IMX_SITE)
 IMX_VPU_SOURCE = imx-vpu-$(IMX_VPU_VERSION).bin
 
@@ -16,7 +16,7 @@ IMX_VPU_MAKE_ENV = \
 	CROSS_COMPILE="$(TARGET_CROSS)" \
 	PLATFORM=$(BR2_PACKAGE_FREESCALE_IMX_PLATFORM)
 
-IMX_VPU_LICENSE = Freescale Semiconductor Software License Agreement
+IMX_VPU_LICENSE = NXP Semiconductor Software License Agreement
 IMX_VPU_LICENSE_FILES = EULA COPYING
 IMX_VPU_REDISTRIBUTE = NO
 
-- 
1.9.1

[Buildroot] [PATCH 03/10] imx-vpu: bump to version 5.4.33

[Gary Bisson]

Andrew, All,

On Fri, Jun 3, 2016 at 3:10 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> VPU firmware has been changed to the format of Linux codec driver firmware.
> Change VPU library to adapt to firmware format change.
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/f5e1056
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>

Regards,
Gary

[Buildroot] [PATCH 04/10] imx-codec: rename from libfslcodec and bump version to 4.0.9

[Andrew Webster]

Changelog:
--[aac_dec] refine the code for pure c build
  aac decoder c build need float point support, which use some
  float point function.

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/4b91194

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
 Config.in.legacy                                   |  7 +++++++
 package/Config.in                                  |  1 -
 package/freescale-imx/Config.in                    |  1 +
 .../imx-codec}/Config.in                           |  6 +++---
 package/freescale-imx/imx-codec/imx-codec.hash     |  2 ++
 package/freescale-imx/imx-codec/imx-codec.mk       | 23 ++++++++++++++++++++++
 package/gstreamer/gst-fsl-plugins/Config.in        |  4 ++--
 .../gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk   |  2 +-
 package/gstreamer1/gst1-imx/Config.in              |  2 +-
 package/gstreamer1/gst1-imx/gst1-imx.mk            |  4 ++--
 package/libfslcodec/libfslcodec.hash               |  2 --
 package/libfslcodec/libfslcodec.mk                 | 23 ----------------------
 12 files changed, 42 insertions(+), 35 deletions(-)
 rename package/{libfslcodec => freescale-imx/imx-codec}/Config.in (75%)
 create mode 100644 package/freescale-imx/imx-codec/imx-codec.hash
 create mode 100644 package/freescale-imx/imx-codec/imx-codec.mk
 delete mode 100644 package/libfslcodec/libfslcodec.hash
 delete mode 100644 package/libfslcodec/libfslcodec.mk

diff --git a/Config.in.legacy b/Config.in.legacy
index b73603b..54d43f1 100644
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -142,6 +142,13 @@ comment "build, or run, in unpredictable ways.               "
 comment "----------------------------------------------------"
 endif
 
+config BR2_PACKAGE_LIBFSLCODEC
+	bool "libfslcodec has been renamed to imx-codec"
+	select BR2_LEGACY
+	select BR2_PACKAGE_IMX_CODEC
+	help
+	  The libfslcodec has been renamed to match the renamed package.
+
 ###############################################################################
 comment "Legacy options removed in 2016.08"
 
diff --git a/package/Config.in b/package/Config.in
index ae74f17..c41e4f6 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -1089,7 +1089,6 @@ menu "Multimedia"
 	source "package/libdvdnav/Config.in"
 	source "package/libdvdread/Config.in"
 	source "package/libebml/Config.in"
-	source "package/libfslcodec/Config.in"
 	source "package/libfslparser/Config.in"
 	source "package/libfslvpuwrap/Config.in"
 	source "package/libhdhomerun/Config.in"
diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in
index 8c03190..052de5a 100644
--- a/package/freescale-imx/Config.in
+++ b/package/freescale-imx/Config.in
@@ -49,6 +49,7 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
 		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX53 || \
 		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q
 
+source "package/freescale-imx/imx-codec/Config.in"
 source "package/freescale-imx/imx-kobs/Config.in"
 source "package/freescale-imx/imx-lib/Config.in"
 source "package/freescale-imx/imx-uuc/Config.in"
diff --git a/package/libfslcodec/Config.in b/package/freescale-imx/imx-codec/Config.in
similarity index 75%
rename from package/libfslcodec/Config.in
rename to package/freescale-imx/imx-codec/Config.in
index d2007fe..e161699 100644
--- a/package/libfslcodec/Config.in
+++ b/package/freescale-imx/imx-codec/Config.in
@@ -1,5 +1,5 @@
-config BR2_PACKAGE_LIBFSLCODEC
-	bool "libfslcodec"
+config BR2_PACKAGE_IMX_CODEC
+	bool "imx-codec"
 	depends on BR2_arm # Only relevant for i.MX
 	depends on BR2_TOOLCHAIN_USES_GLIBC # prebuilt binaries
 	help
@@ -8,6 +8,6 @@ config BR2_PACKAGE_LIBFSLCODEC
 	  This library is provided by Freescale as-is and doesn't have
 	  an upstream.
 
-comment "libfslcodec needs an (e)glibc toolchain"
+comment "imx-codec needs an (e)glibc toolchain"
 	depends on BR2_arm
 	depends on !BR2_TOOLCHAIN_USES_GLIBC
diff --git a/package/freescale-imx/imx-codec/imx-codec.hash b/package/freescale-imx/imx-codec/imx-codec.hash
new file mode 100644
index 0000000..39bddc1
--- /dev/null
+++ b/package/freescale-imx/imx-codec/imx-codec.hash
@@ -0,0 +1,2 @@
+# locally computed
+sha256	62bda182143cde9743cba0eb2a1c315a53cb434294605742f9fc364219958888  imx-codec-4.0.9.bin
diff --git a/package/freescale-imx/imx-codec/imx-codec.mk b/package/freescale-imx/imx-codec/imx-codec.mk
new file mode 100644
index 0000000..67d3390
--- /dev/null
+++ b/package/freescale-imx/imx-codec/imx-codec.mk
@@ -0,0 +1,23 @@
+################################################################################
+#
+# imx-codec
+#
+################################################################################
+
+IMX_CODEC_VERSION = 4.0.9
+IMX_CODEC_SITE = $(FREESCALE_IMX_SITE)
+IMX_CODEC_SOURCE = imx-codec-$(IMX_CODEC_VERSION).bin
+IMX_CODEC_INSTALL_STAGING = YES
+
+IMX_CODEC_LICENSE = NXP Semiconductor Software License Agreement, BSD-3c (flac, ogg headers)
+IMX_CODEC_LICENSE_FILES = EULA COPYING
+IMX_CODEC_REDISTRIBUTE = NO
+
+define IMX_CODEC_EXTRACT_CMDS
+	$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(IMX_CODEC_SOURCE))
+endef
+
+# FIXME The Makefile installs both the arm9 and arm11 versions of the
+# libraries, but we only need one of them.
+
+$(eval $(autotools-package))
diff --git a/package/gstreamer/gst-fsl-plugins/Config.in b/package/gstreamer/gst-fsl-plugins/Config.in
index 0407dc5..8c82a4a 100644
--- a/package/gstreamer/gst-fsl-plugins/Config.in
+++ b/package/gstreamer/gst-fsl-plugins/Config.in
@@ -9,12 +9,12 @@ config BR2_PACKAGE_GST_FSL_PLUGINS
 	bool "gst-fsl-plugins"
 	depends on BR2_LINUX_KERNEL
 	depends on BR2_arm # Only relevant for i.MX
-	depends on BR2_TOOLCHAIN_USES_GLIBC # libfslcodec
+	depends on BR2_TOOLCHAIN_USES_GLIBC # imx-codec
 	select BR2_PACKAGE_GST_PLUGINS_BASE
 	select BR2_PACKAGE_LIBFSLVPUWRAP if BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
 	select BR2_PACKAGE_IMX_LIB
 	select BR2_PACKAGE_LIBFSLPARSER
-	select BR2_PACKAGE_LIBFSLCODEC
+	select BR2_PACKAGE_IMX_CODEC
 	select BR2_PACKAGE_FREESCALE_IMX
 	help
 	  GStreamer plugins for hardware-accelerated audio and video
diff --git a/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk b/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
index fa0e093..50732bf 100644
--- a/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
+++ b/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
@@ -16,7 +16,7 @@ GST_FSL_PLUGINS_INSTALL_STAGING = YES
 GST_FSL_PLUGINS_AUTORECONF = YES
 
 GST_FSL_PLUGINS_DEPENDENCIES += host-pkgconf gstreamer gst-plugins-base \
-	imx-lib libfslparser libfslcodec
+	imx-lib libfslparser imx-codec
 
 ifeq ($(BR2_PACKAGE_FREESCALE_IMX_HAS_VPU),y)
 GST_FSL_PLUGINS_DEPENDENCIES += libfslvpuwrap
diff --git a/package/gstreamer1/gst1-imx/Config.in b/package/gstreamer1/gst1-imx/Config.in
index 0084483..3512666 100644
--- a/package/gstreamer1/gst1-imx/Config.in
+++ b/package/gstreamer1/gst1-imx/Config.in
@@ -18,6 +18,6 @@ config BR2_PACKAGE_GST1_IMX
 	  The VPU plugin is built when BR2_PACKAGE_LIBIMXVPUAPI is enabled.
 	  The EGL plugin is built when BR2_PACKAGE_IMX_GPU_VIV is enabled.
 	  The G2D plugin is built when BR2_PACKAGE_IMX_GPU_VIV_G2D is enabled.
-	  The MP3 plugin is built when BR2_PACKAGE_LIBFSLCODEC is enabled.
+	  The MP3 plugin is built when BR2_PACKAGE_IMX_CODEC is enabled.
 
 	  https://github.com/Freescale/gstreamer-imx
diff --git a/package/gstreamer1/gst1-imx/gst1-imx.mk b/package/gstreamer1/gst1-imx/gst1-imx.mk
index 8838110..f81d8c9 100644
--- a/package/gstreamer1/gst1-imx/gst1-imx.mk
+++ b/package/gstreamer1/gst1-imx/gst1-imx.mk
@@ -27,8 +27,8 @@ ifeq ($(BR2_PACKAGE_GST1_PLUGINS_BAD),y)
 GST1_IMX_DEPENDENCIES += gst1-plugins-bad
 endif
 
-ifeq ($(BR2_PACKAGE_LIBFSLCODEC),y)
-GST1_IMX_DEPENDENCIES += libfslcodec
+ifeq ($(BR2_PACKAGE_IMX_CODEC),y)
+GST1_IMX_DEPENDENCIES += imx-codec
 endif
 
 ifeq ($(BR2_PACKAGE_LIBIMXVPUAPI),y)
diff --git a/package/libfslcodec/libfslcodec.hash b/package/libfslcodec/libfslcodec.hash
deleted file mode 100644
index fd934f7..0000000
--- a/package/libfslcodec/libfslcodec.hash
+++ /dev/null
@@ -1,2 +0,0 @@
-# locally computed
-sha256	544ffc5989bce18ca50c7a826cc03370b1cf8455335e4291ef0c0779b4c33de0  libfslcodec-4.0.8.bin
diff --git a/package/libfslcodec/libfslcodec.mk b/package/libfslcodec/libfslcodec.mk
deleted file mode 100644
index 502390f..0000000
--- a/package/libfslcodec/libfslcodec.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-################################################################################
-#
-# libfslcodec
-#
-################################################################################
-
-LIBFSLCODEC_VERSION = 4.0.8
-LIBFSLCODEC_SITE = $(FREESCALE_IMX_SITE)
-LIBFSLCODEC_SOURCE = libfslcodec-$(LIBFSLCODEC_VERSION).bin
-LIBFSLCODEC_INSTALL_STAGING = YES
-
-LIBFSLCODEC_LICENSE = Freescale Semiconductor Software License Agreement, BSD-3c (flac, ogg headers)
-LIBFSLCODEC_LICENSE_FILES = EULA COPYING
-LIBFSLCODEC_REDISTRIBUTE = NO
-
-define LIBFSLCODEC_EXTRACT_CMDS
-	$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(LIBFSLCODEC_SOURCE))
-endef
-
-# FIXME The Makefile installs both the arm9 and arm11 versions of the
-# libraries, but we only need one of them.
-
-$(eval $(autotools-package))
-- 
1.9.1

[Buildroot] [PATCH 04/10] imx-codec: rename from libfslcodec and bump version to 4.0.9

[Gary Bisson]

Andrew, All,

On Fri, Jun 3, 2016 at 3:10 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> --[aac_dec] refine the code for pure c build
>   aac decoder c build need float point support, which use some
>   float point function.
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/4b91194
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>
> ---
>  Config.in.legacy                                   |  7 +++++++
>  package/Config.in                                  |  1 -
>  package/freescale-imx/Config.in                    |  1 +
>  .../imx-codec}/Config.in                           |  6 +++---
>  package/freescale-imx/imx-codec/imx-codec.hash     |  2 ++
>  package/freescale-imx/imx-codec/imx-codec.mk       | 23 ++++++++++++++++++++++
>  package/gstreamer/gst-fsl-plugins/Config.in        |  4 ++--
>  .../gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk   |  2 +-
>  package/gstreamer1/gst1-imx/Config.in              |  2 +-
>  package/gstreamer1/gst1-imx/gst1-imx.mk            |  4 ++--
>  package/libfslcodec/libfslcodec.hash               |  2 --
>  package/libfslcodec/libfslcodec.mk                 | 23 ----------------------
>  12 files changed, 42 insertions(+), 35 deletions(-)
>  rename package/{libfslcodec => freescale-imx/imx-codec}/Config.in (75%)
>  create mode 100644 package/freescale-imx/imx-codec/imx-codec.hash
>  create mode 100644 package/freescale-imx/imx-codec/imx-codec.mk
>  delete mode 100644 package/libfslcodec/libfslcodec.hash
>  delete mode 100644 package/libfslcodec/libfslcodec.mk
>
> diff --git a/Config.in.legacy b/Config.in.legacy
> index b73603b..54d43f1 100644
> --- a/Config.in.legacy
> +++ b/Config.in.legacy
> @@ -142,6 +142,13 @@ comment "build, or run, in unpredictable ways.               "
>  comment "----------------------------------------------------"
>  endif
>
> +config BR2_PACKAGE_LIBFSLCODEC
> +       bool "libfslcodec has been renamed to imx-codec"
> +       select BR2_LEGACY
> +       select BR2_PACKAGE_IMX_CODEC
> +       help
> +         The libfslcodec has been renamed to match the renamed package.
> +

This section should actually be under "Legacy options removed in 2016.08" below.

>  ###############################################################################
>  comment "Legacy options removed in 2016.08"
>
> diff --git a/package/Config.in b/package/Config.in
> index ae74f17..c41e4f6 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -1089,7 +1089,6 @@ menu "Multimedia"
>         source "package/libdvdnav/Config.in"
>         source "package/libdvdread/Config.in"
>         source "package/libebml/Config.in"
> -       source "package/libfslcodec/Config.in"
>         source "package/libfslparser/Config.in"
>         source "package/libfslvpuwrap/Config.in"
>         source "package/libhdhomerun/Config.in"
> diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in
> index 8c03190..052de5a 100644
> --- a/package/freescale-imx/Config.in
> +++ b/package/freescale-imx/Config.in
> @@ -49,6 +49,7 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
>                 BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX53 || \
>                 BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q
>
> +source "package/freescale-imx/imx-codec/Config.in"
>  source "package/freescale-imx/imx-kobs/Config.in"
>  source "package/freescale-imx/imx-lib/Config.in"
>  source "package/freescale-imx/imx-uuc/Config.in"
> diff --git a/package/libfslcodec/Config.in b/package/freescale-imx/imx-codec/Config.in
> similarity index 75%
> rename from package/libfslcodec/Config.in
> rename to package/freescale-imx/imx-codec/Config.in
> index d2007fe..e161699 100644
> --- a/package/libfslcodec/Config.in
> +++ b/package/freescale-imx/imx-codec/Config.in
> @@ -1,5 +1,5 @@
> -config BR2_PACKAGE_LIBFSLCODEC
> -       bool "libfslcodec"
> +config BR2_PACKAGE_IMX_CODEC
> +       bool "imx-codec"
>         depends on BR2_arm # Only relevant for i.MX
>         depends on BR2_TOOLCHAIN_USES_GLIBC # prebuilt binaries
>         help
> @@ -8,6 +8,6 @@ config BR2_PACKAGE_LIBFSLCODEC
>           This library is provided by Freescale as-is and doesn't have
>           an upstream.

Although it isn't done in the Yocto patch I guess this renaming is a
good time to remove the Freescale reference. This library is now
provided by NXP as-is, targeting NXP i.MX SoCs.

Regards,
Gary

[Buildroot] [PATCH 04/10] imx-codec: rename from libfslcodec and bump version to 4.0.9

[Andrew Webster]

> -----Original Message-----
> From: Gary Bisson [mailto:gary.bisson at boundarydevices.com]
> Sent: Monday, June 06, 2016 10:34 AM
> To: Andrew Webster
> Cc: buildroot at buildroot.org
> Subject: Re: [Buildroot] [PATCH 04/10] imx-codec: rename from libfslcodec
> and bump version to 4.0.9
> 
> Andrew, All,
> 
> On Fri, Jun 3, 2016 at 3:10 PM, Andrew Webster <awebster@arcx.com>
> wrote:
> > Changelog:
> > --[aac_dec] refine the code for pure c build
> >   aac decoder c build need float point support, which use some
> >   float point function.
> >
> > This patch is based on the Yocto equivalent:
> > https://github.com/Freescale/meta-fsl-arm/commit/4b91194
> >
> > Signed-off-by: Andrew Webster <awebster@arcx.com>
> > ---
> >  Config.in.legacy                                   |  7 +++++++
> >  package/Config.in                                  |  1 -
> >  package/freescale-imx/Config.in                    |  1 +
> >  .../imx-codec}/Config.in                           |  6 +++---
> >  package/freescale-imx/imx-codec/imx-codec.hash     |  2 ++
> >  package/freescale-imx/imx-codec/imx-codec.mk       | 23
> ++++++++++++++++++++++
> >  package/gstreamer/gst-fsl-plugins/Config.in        |  4 ++--
> >  .../gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk   |  2 +-
> >  package/gstreamer1/gst1-imx/Config.in              |  2 +-
> >  package/gstreamer1/gst1-imx/gst1-imx.mk            |  4 ++--
> >  package/libfslcodec/libfslcodec.hash               |  2 --
> >  package/libfslcodec/libfslcodec.mk                 | 23 ----------------------
> >  12 files changed, 42 insertions(+), 35 deletions(-)  rename
> > package/{libfslcodec => freescale-imx/imx-codec}/Config.in (75%)
> > create mode 100644 package/freescale-imx/imx-codec/imx-codec.hash
> >  create mode 100644 package/freescale-imx/imx-codec/imx-codec.mk
> >  delete mode 100644 package/libfslcodec/libfslcodec.hash
> >  delete mode 100644 package/libfslcodec/libfslcodec.mk
> >
> > diff --git a/Config.in.legacy b/Config.in.legacy index
> > b73603b..54d43f1 100644
> > --- a/Config.in.legacy
> > +++ b/Config.in.legacy
> > @@ -142,6 +142,13 @@ comment "build, or run, in unpredictable ways.
> "
> >  comment "----------------------------------------------------"
> >  endif
> >
> > +config BR2_PACKAGE_LIBFSLCODEC
> > +       bool "libfslcodec has been renamed to imx-codec"
> > +       select BR2_LEGACY
> > +       select BR2_PACKAGE_IMX_CODEC
> > +       help
> > +         The libfslcodec has been renamed to match the renamed package.
> > +
> 
> This section should actually be under "Legacy options removed in 2016.08"
> below.

I will move.  This snuck in when I rebased and I missed it.

> 
> >
> >
> ##########################################################
> ############
> > #########  comment "Legacy options removed in 2016.08"
> >
> > diff --git a/package/Config.in b/package/Config.in index
> > ae74f17..c41e4f6 100644
> > --- a/package/Config.in
> > +++ b/package/Config.in
> > @@ -1089,7 +1089,6 @@ menu "Multimedia"
> >         source "package/libdvdnav/Config.in"
> >         source "package/libdvdread/Config.in"
> >         source "package/libebml/Config.in"
> > -       source "package/libfslcodec/Config.in"
> >         source "package/libfslparser/Config.in"
> >         source "package/libfslvpuwrap/Config.in"
> >         source "package/libhdhomerun/Config.in"
> > diff --git a/package/freescale-imx/Config.in
> > b/package/freescale-imx/Config.in index 8c03190..052de5a 100644
> > --- a/package/freescale-imx/Config.in
> > +++ b/package/freescale-imx/Config.in
> > @@ -49,6 +49,7 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
> >                 BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX53 || \
> >                 BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q
> >
> > +source "package/freescale-imx/imx-codec/Config.in"
> >  source "package/freescale-imx/imx-kobs/Config.in"
> >  source "package/freescale-imx/imx-lib/Config.in"
> >  source "package/freescale-imx/imx-uuc/Config.in"
> > diff --git a/package/libfslcodec/Config.in
> > b/package/freescale-imx/imx-codec/Config.in
> > similarity index 75%
> > rename from package/libfslcodec/Config.in rename to
> > package/freescale-imx/imx-codec/Config.in
> > index d2007fe..e161699 100644
> > --- a/package/libfslcodec/Config.in
> > +++ b/package/freescale-imx/imx-codec/Config.in
> > @@ -1,5 +1,5 @@
> > -config BR2_PACKAGE_LIBFSLCODEC
> > -       bool "libfslcodec"
> > +config BR2_PACKAGE_IMX_CODEC
> > +       bool "imx-codec"
> >         depends on BR2_arm # Only relevant for i.MX
> >         depends on BR2_TOOLCHAIN_USES_GLIBC # prebuilt binaries
> >         help
> > @@ -8,6 +8,6 @@ config BR2_PACKAGE_LIBFSLCODEC
> >           This library is provided by Freescale as-is and doesn't have
> >           an upstream.
> 
> Although it isn't done in the Yocto patch I guess this renaming is a good time
> to remove the Freescale reference. This library is now provided by NXP as-is,
> targeting NXP i.MX SoCs.
> 
> Regards,
> Gary

[Buildroot] [PATCH 05/10] imx-parser: rename from libfslparser and bump version to 4.0.9

[Andrew Webster]

Changelog:
--Add aac latm parser in parser_libs, support aac latm in mpeg2 parser

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/e2c6f10

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
 Config.in.legacy                                   |  7 +++++++
 package/Config.in                                  |  1 -
 package/freescale-imx/Config.in                    |  1 +
 .../imx-parser}/Config.in                          |  4 ++--
 package/freescale-imx/imx-parser/imx-parser.hash   |  2 ++
 package/freescale-imx/imx-parser/imx-parser.mk     | 23 ++++++++++++++++++++++
 package/gstreamer/gst-fsl-plugins/Config.in        |  2 +-
 .../gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk   |  2 +-
 package/libfslparser/libfslparser.hash             |  2 --
 package/libfslparser/libfslparser.mk               | 23 ----------------------
 10 files changed, 37 insertions(+), 30 deletions(-)
 rename package/{libfslparser => freescale-imx/imx-parser}/Config.in (78%)
 create mode 100644 package/freescale-imx/imx-parser/imx-parser.hash
 create mode 100644 package/freescale-imx/imx-parser/imx-parser.mk
 delete mode 100644 package/libfslparser/libfslparser.hash
 delete mode 100644 package/libfslparser/libfslparser.mk

diff --git a/Config.in.legacy b/Config.in.legacy
index 54d43f1..dab8505 100644
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -142,6 +142,13 @@ comment "build, or run, in unpredictable ways.               "
 comment "----------------------------------------------------"
 endif
 
+config BR2_PACKAGE_LIBFSLPARSER
+	bool "libfslparser has been renamed to imx-parser"
+	select BR2_LEGACY
+	select BR2_PACKAGE_IMX_PARSER
+	help
+	  The libfslparser has been renamed to match the renamed package.
+
 config BR2_PACKAGE_LIBFSLCODEC
 	bool "libfslcodec has been renamed to imx-codec"
 	select BR2_LEGACY
diff --git a/package/Config.in b/package/Config.in
index c41e4f6..8c3c6b8 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -1089,7 +1089,6 @@ menu "Multimedia"
 	source "package/libdvdnav/Config.in"
 	source "package/libdvdread/Config.in"
 	source "package/libebml/Config.in"
-	source "package/libfslparser/Config.in"
 	source "package/libfslvpuwrap/Config.in"
 	source "package/libhdhomerun/Config.in"
 	source "package/libimxvpuapi/Config.in"
diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in
index 052de5a..868e51c 100644
--- a/package/freescale-imx/Config.in
+++ b/package/freescale-imx/Config.in
@@ -52,6 +52,7 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
 source "package/freescale-imx/imx-codec/Config.in"
 source "package/freescale-imx/imx-kobs/Config.in"
 source "package/freescale-imx/imx-lib/Config.in"
+source "package/freescale-imx/imx-parser/Config.in"
 source "package/freescale-imx/imx-uuc/Config.in"
 source "package/freescale-imx/imx-vpu/Config.in"
 source "package/freescale-imx/firmware-imx/Config.in"
diff --git a/package/libfslparser/Config.in b/package/freescale-imx/imx-parser/Config.in
similarity index 78%
rename from package/libfslparser/Config.in
rename to package/freescale-imx/imx-parser/Config.in
index e3ab980..d7048a7 100644
--- a/package/libfslparser/Config.in
+++ b/package/freescale-imx/imx-parser/Config.in
@@ -1,5 +1,5 @@
-config BR2_PACKAGE_LIBFSLPARSER
-	bool "libfslparser"
+config BR2_PACKAGE_IMX_PARSER
+	bool "imx-parser"
 	depends on BR2_arm # Only relevant for i.MX
 	help
 	  Binary parser libraries for the Freescale i.MX SoCs.
diff --git a/package/freescale-imx/imx-parser/imx-parser.hash b/package/freescale-imx/imx-parser/imx-parser.hash
new file mode 100644
index 0000000..2193c66
--- /dev/null
+++ b/package/freescale-imx/imx-parser/imx-parser.hash
@@ -0,0 +1,2 @@
+# locally computed
+sha256	1bec0101843db2e95d61e3dbe9e35172d874e54be19cc5d8bf72a735d5e3236f  imx-parser-4.0.9.bin
diff --git a/package/freescale-imx/imx-parser/imx-parser.mk b/package/freescale-imx/imx-parser/imx-parser.mk
new file mode 100644
index 0000000..a207d6e
--- /dev/null
+++ b/package/freescale-imx/imx-parser/imx-parser.mk
@@ -0,0 +1,23 @@
+################################################################################
+#
+# imx-parser
+#
+################################################################################
+
+IMX_PARSER_VERSION = 4.0.9
+IMX_PARSER_SITE = $(FREESCALE_IMX_SITE)
+IMX_PARSER_SOURCE = imx-parser-$(IMX_PARSER_VERSION).bin
+IMX_PARSER_INSTALL_STAGING = YES
+
+IMX_PARSER_LICENSE = NXP Semiconductor Software License Agreement
+IMX_PARSER_LICENSE_FILES = EULA COPYING
+IMX_PARSER_REDISTRIBUTE = NO
+
+define IMX_PARSER_EXTRACT_CMDS
+	$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(IMX_PARSER_SOURCE))
+endef
+
+# The Makefile installs several versions of the libraries, but we only
+# need one of them, depending on the platform.
+
+$(eval $(autotools-package))
diff --git a/package/gstreamer/gst-fsl-plugins/Config.in b/package/gstreamer/gst-fsl-plugins/Config.in
index 8c82a4a..38c8a47 100644
--- a/package/gstreamer/gst-fsl-plugins/Config.in
+++ b/package/gstreamer/gst-fsl-plugins/Config.in
@@ -13,7 +13,7 @@ config BR2_PACKAGE_GST_FSL_PLUGINS
 	select BR2_PACKAGE_GST_PLUGINS_BASE
 	select BR2_PACKAGE_LIBFSLVPUWRAP if BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
 	select BR2_PACKAGE_IMX_LIB
-	select BR2_PACKAGE_LIBFSLPARSER
+	select BR2_PACKAGE_IMX_PARSER
 	select BR2_PACKAGE_IMX_CODEC
 	select BR2_PACKAGE_FREESCALE_IMX
 	help
diff --git a/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk b/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
index 50732bf..8db8d1b 100644
--- a/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
+++ b/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
@@ -16,7 +16,7 @@ GST_FSL_PLUGINS_INSTALL_STAGING = YES
 GST_FSL_PLUGINS_AUTORECONF = YES
 
 GST_FSL_PLUGINS_DEPENDENCIES += host-pkgconf gstreamer gst-plugins-base \
-	imx-lib libfslparser imx-codec
+	imx-lib imx-parser imx-codec
 
 ifeq ($(BR2_PACKAGE_FREESCALE_IMX_HAS_VPU),y)
 GST_FSL_PLUGINS_DEPENDENCIES += libfslvpuwrap
diff --git a/package/libfslparser/libfslparser.hash b/package/libfslparser/libfslparser.hash
deleted file mode 100644
index c49345f..0000000
--- a/package/libfslparser/libfslparser.hash
+++ /dev/null
@@ -1,2 +0,0 @@
-# locally computed
-sha256	a04621783c84a9776216caff9563c7f840fddd584b0b2d27738d6ca6d2c77f32  libfslparser-4.0.8.bin
diff --git a/package/libfslparser/libfslparser.mk b/package/libfslparser/libfslparser.mk
deleted file mode 100644
index 44e6039..0000000
--- a/package/libfslparser/libfslparser.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-################################################################################
-#
-# libfslparser
-#
-################################################################################
-
-LIBFSLPARSER_VERSION = 4.0.8
-LIBFSLPARSER_SITE = $(FREESCALE_IMX_SITE)
-LIBFSLPARSER_SOURCE = libfslparser-$(LIBFSLPARSER_VERSION).bin
-LIBFSLPARSER_INSTALL_STAGING = YES
-
-LIBFSLPARSER_LICENSE = Freescale Semiconductor Software License Agreement
-LIBFSLPARSER_LICENSE_FILES = EULA COPYING
-LIBFSLPARSER_REDISTRIBUTE = NO
-
-define LIBFSLPARSER_EXTRACT_CMDS
-	$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(LIBFSLPARSER_SOURCE))
-endef
-
-# The Makefile installs several versions of the libraries, but we only
-# need one of them, depending on the platform.
-
-$(eval $(autotools-package))
-- 
1.9.1

[Buildroot] [PATCH 05/10] imx-parser: rename from libfslparser and bump version to 4.0.9

[Gary Bisson]

Andrew, All,

On Fri, Jun 3, 2016 at 3:12 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> --Add aac latm parser in parser_libs, support aac latm in mpeg2 parser
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/e2c6f10
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>
> ---
>  Config.in.legacy                                   |  7 +++++++
>  package/Config.in                                  |  1 -
>  package/freescale-imx/Config.in                    |  1 +
>  .../imx-parser}/Config.in                          |  4 ++--
>  package/freescale-imx/imx-parser/imx-parser.hash   |  2 ++
>  package/freescale-imx/imx-parser/imx-parser.mk     | 23 ++++++++++++++++++++++
>  package/gstreamer/gst-fsl-plugins/Config.in        |  2 +-
>  .../gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk   |  2 +-
>  package/libfslparser/libfslparser.hash             |  2 --
>  package/libfslparser/libfslparser.mk               | 23 ----------------------
>  10 files changed, 37 insertions(+), 30 deletions(-)
>  rename package/{libfslparser => freescale-imx/imx-parser}/Config.in (78%)
>  create mode 100644 package/freescale-imx/imx-parser/imx-parser.hash
>  create mode 100644 package/freescale-imx/imx-parser/imx-parser.mk
>  delete mode 100644 package/libfslparser/libfslparser.hash
>  delete mode 100644 package/libfslparser/libfslparser.mk
>
> diff --git a/Config.in.legacy b/Config.in.legacy
> index 54d43f1..dab8505 100644
> --- a/Config.in.legacy
> +++ b/Config.in.legacy
> @@ -142,6 +142,13 @@ comment "build, or run, in unpredictable ways.               "
>  comment "----------------------------------------------------"
>  endif
>
> +config BR2_PACKAGE_LIBFSLPARSER
> +       bool "libfslparser has been renamed to imx-parser"
> +       select BR2_LEGACY
> +       select BR2_PACKAGE_IMX_PARSER
> +       help
> +         The libfslparser has been renamed to match the renamed package.
> +

Same as imx-codec, I believe this should be under the 2016.08 section.

>  config BR2_PACKAGE_LIBFSLCODEC
>         bool "libfslcodec has been renamed to imx-codec"
>         select BR2_LEGACY
> diff --git a/package/Config.in b/package/Config.in
> index c41e4f6..8c3c6b8 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -1089,7 +1089,6 @@ menu "Multimedia"
>         source "package/libdvdnav/Config.in"
>         source "package/libdvdread/Config.in"
>         source "package/libebml/Config.in"
> -       source "package/libfslparser/Config.in"
>         source "package/libfslvpuwrap/Config.in"
>         source "package/libhdhomerun/Config.in"
>         source "package/libimxvpuapi/Config.in"
> diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in
> index 052de5a..868e51c 100644
> --- a/package/freescale-imx/Config.in
> +++ b/package/freescale-imx/Config.in
> @@ -52,6 +52,7 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
>  source "package/freescale-imx/imx-codec/Config.in"
>  source "package/freescale-imx/imx-kobs/Config.in"
>  source "package/freescale-imx/imx-lib/Config.in"
> +source "package/freescale-imx/imx-parser/Config.in"
>  source "package/freescale-imx/imx-uuc/Config.in"
>  source "package/freescale-imx/imx-vpu/Config.in"
>  source "package/freescale-imx/firmware-imx/Config.in"
> diff --git a/package/libfslparser/Config.in b/package/freescale-imx/imx-parser/Config.in
> similarity index 78%
> rename from package/libfslparser/Config.in
> rename to package/freescale-imx/imx-parser/Config.in
> index e3ab980..d7048a7 100644
> --- a/package/libfslparser/Config.in
> +++ b/package/freescale-imx/imx-parser/Config.in
> @@ -1,5 +1,5 @@
> -config BR2_PACKAGE_LIBFSLPARSER
> -       bool "libfslparser"
> +config BR2_PACKAGE_IMX_PARSER
> +       bool "imx-parser"
>         depends on BR2_arm # Only relevant for i.MX
>         help
>           Binary parser libraries for the Freescale i.MX SoCs.

Same as imx-codec, I think we should get rid of those Freescale
references right now for the packages that get renamed.

Other than that it looks good.

Regards,
Gary

[Buildroot] [PATCH 06/10] imx-vpuwrap: rename from libfslvpuwrap and bump version to 1.0.65

[Andrew Webster]

Changelog:
--Update 'nLastFrameEndPosPhy' in seqinit stage to avoid feed
  the same SPS to vpu repeatedly.

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/d6b9490

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
 Config.in.legacy                                    |  7 +++++++
 package/Config.in                                   |  1 -
 package/freescale-imx/Config.in                     |  1 +
 .../imx-vpuwrap}/Config.in                          |  8 ++++----
 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash  |  2 ++
 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk    | 21 +++++++++++++++++++++
 package/libfslvpuwrap/libfslvpuwrap.hash            |  2 --
 package/libfslvpuwrap/libfslvpuwrap.mk              | 21 ---------------------
 8 files changed, 35 insertions(+), 28 deletions(-)
 rename package/{libfslvpuwrap => freescale-imx/imx-vpuwrap}/Config.in (69%)
 create mode 100644 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash
 create mode 100644 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk
 delete mode 100644 package/libfslvpuwrap/libfslvpuwrap.hash
 delete mode 100644 package/libfslvpuwrap/libfslvpuwrap.mk

diff --git a/Config.in.legacy b/Config.in.legacy
index dab8505..0b0e9e7 100644
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -142,6 +142,13 @@ comment "build, or run, in unpredictable ways.               "
 comment "----------------------------------------------------"
 endif
 
+config BR2_PACKAGE_LIBFSLVPUWRAP
+	bool "libfslvpuwrap has been renamed to imx-vpuwrap"
+	select BR2_LEGACY
+	select BR2_PACKAGE_IMX_VPUWRAP
+	help
+	  The libfslvpuwrap has been renamed to match the renamed package.
+
 config BR2_PACKAGE_LIBFSLPARSER
 	bool "libfslparser has been renamed to imx-parser"
 	select BR2_LEGACY
diff --git a/package/Config.in b/package/Config.in
index 8c3c6b8..696f30d 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -1089,7 +1089,6 @@ menu "Multimedia"
 	source "package/libdvdnav/Config.in"
 	source "package/libdvdread/Config.in"
 	source "package/libebml/Config.in"
-	source "package/libfslvpuwrap/Config.in"
 	source "package/libhdhomerun/Config.in"
 	source "package/libimxvpuapi/Config.in"
 	source "package/libmatroska/Config.in"
diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in
index 868e51c..056728f 100644
--- a/package/freescale-imx/Config.in
+++ b/package/freescale-imx/Config.in
@@ -55,6 +55,7 @@ source "package/freescale-imx/imx-lib/Config.in"
 source "package/freescale-imx/imx-parser/Config.in"
 source "package/freescale-imx/imx-uuc/Config.in"
 source "package/freescale-imx/imx-vpu/Config.in"
+source "package/freescale-imx/imx-vpuwrap/Config.in"
 source "package/freescale-imx/firmware-imx/Config.in"
 if (BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX51 || BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX53)
 source "package/freescale-imx/gpu-amd-bin-mx51/Config.in"
diff --git a/package/libfslvpuwrap/Config.in b/package/freescale-imx/imx-vpuwrap/Config.in
similarity index 69%
rename from package/libfslvpuwrap/Config.in
rename to package/freescale-imx/imx-vpuwrap/Config.in
index 72f7126..40ebabf 100644
--- a/package/libfslvpuwrap/Config.in
+++ b/package/freescale-imx/imx-vpuwrap/Config.in
@@ -1,13 +1,13 @@
-comment "libfslvpuwrap needs an imx-specific Linux kernel to be built"
+comment "imx-vpuwrap needs an imx-specific Linux kernel to be built"
 	depends on BR2_arm
 	depends on !BR2_LINUX_KERNEL
 
-comment "libfslvpuwrap needs an i.MX platform with VPU support"
+comment "imx-vpuwrap needs an i.MX platform with VPU support"
 	depends on BR2_arm
 	depends on BR2_LINUX_KERNEL && !BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
 
-config BR2_PACKAGE_LIBFSLVPUWRAP
-	bool "libfslvpuwrap"
+config BR2_PACKAGE_IMX_VPUWRAP
+	bool "imx-vpuwrap"
 	depends on BR2_LINUX_KERNEL
 	depends on BR2_arm # Only relevant for i.MX
 	depends on BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
diff --git a/package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash b/package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash
new file mode 100644
index 0000000..42b97a1
--- /dev/null
+++ b/package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash
@@ -0,0 +1,2 @@
+# locally computed
+sha256	ddeacb7d9cb26c8864374df6d3f090aad47cd2ae409c2b9c817b773447252d61  imx-vpuwrap-1.0.65.bin
diff --git a/package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk b/package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk
new file mode 100644
index 0000000..da0e32c
--- /dev/null
+++ b/package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk
@@ -0,0 +1,21 @@
+################################################################################
+#
+# imx-vpuwrap
+#
+################################################################################
+
+IMX_VPUWRAP_VERSION = 1.0.65
+IMX_VPUWRAP_SITE = $(FREESCALE_IMX_SITE)
+IMX_VPUWRAP_SOURCE = imx-vpuwrap-$(IMX_VPUWRAP_VERSION).bin
+IMX_VPUWRAP_DEPENDENCIES = imx-vpu
+IMX_VPUWRAP_INSTALL_STAGING = YES
+
+IMX_VPUWRAP_LICENSE = NXP Semiconductor Software License Agreement
+IMX_VPUWRAP_LICENSE_FILES = EULA COPYING
+IMX_VPUWRAP_REDISTRIBUTE = NO
+
+define IMX_VPUWRAP_EXTRACT_CMDS
+	$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(IMX_VPUWRAP_SOURCE))
+endef
+
+$(eval $(autotools-package))
diff --git a/package/libfslvpuwrap/libfslvpuwrap.hash b/package/libfslvpuwrap/libfslvpuwrap.hash
deleted file mode 100644
index e987077..0000000
--- a/package/libfslvpuwrap/libfslvpuwrap.hash
+++ /dev/null
@@ -1,2 +0,0 @@
-# locally computed
-sha256	0717faccb5413dc95ce9ad919400095ecf722320478c924366793a6cc450ae16  libfslvpuwrap-1.0.62.bin
diff --git a/package/libfslvpuwrap/libfslvpuwrap.mk b/package/libfslvpuwrap/libfslvpuwrap.mk
deleted file mode 100644
index 12a4e86..0000000
--- a/package/libfslvpuwrap/libfslvpuwrap.mk
+++ /dev/null
@@ -1,21 +0,0 @@
-################################################################################
-#
-# libfslvpuwrap
-#
-################################################################################
-
-LIBFSLVPUWRAP_VERSION = 1.0.62
-LIBFSLVPUWRAP_SITE = $(FREESCALE_IMX_SITE)
-LIBFSLVPUWRAP_SOURCE = libfslvpuwrap-$(LIBFSLVPUWRAP_VERSION).bin
-LIBFSLVPUWRAP_DEPENDENCIES = imx-vpu
-LIBFSLVPUWRAP_INSTALL_STAGING = YES
-
-LIBFSLVPUWRAP_LICENSE = Freescale Semiconductor Software License Agreement
-LIBFSLVPUWRAP_LICENSE_FILES = EULA COPYING
-LIBFSLVPUWRAP_REDISTRIBUTE = NO
-
-define LIBFSLVPUWRAP_EXTRACT_CMDS
-	$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(LIBFSLVPUWRAP_SOURCE))
-endef
-
-$(eval $(autotools-package))
-- 
1.9.1

[Buildroot] [PATCH 06/10] imx-vpuwrap: rename from libfslvpuwrap and bump version to 1.0.65

[Gary Bisson]

Andrew, All,

On Fri, Jun 3, 2016 at 3:12 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> --Update 'nLastFrameEndPosPhy' in seqinit stage to avoid feed
>   the same SPS to vpu repeatedly.
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/d6b9490
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>
> ---
>  Config.in.legacy                                    |  7 +++++++
>  package/Config.in                                   |  1 -
>  package/freescale-imx/Config.in                     |  1 +
>  .../imx-vpuwrap}/Config.in                          |  8 ++++----
>  package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash  |  2 ++
>  package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk    | 21 +++++++++++++++++++++
>  package/libfslvpuwrap/libfslvpuwrap.hash            |  2 --
>  package/libfslvpuwrap/libfslvpuwrap.mk              | 21 ---------------------
>  8 files changed, 35 insertions(+), 28 deletions(-)
>  rename package/{libfslvpuwrap => freescale-imx/imx-vpuwrap}/Config.in (69%)
>  create mode 100644 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash
>  create mode 100644 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk
>  delete mode 100644 package/libfslvpuwrap/libfslvpuwrap.hash
>  delete mode 100644 package/libfslvpuwrap/libfslvpuwrap.mk
>
> diff --git a/Config.in.legacy b/Config.in.legacy
> index dab8505..0b0e9e7 100644
> --- a/Config.in.legacy
> +++ b/Config.in.legacy
> @@ -142,6 +142,13 @@ comment "build, or run, in unpredictable ways.               "
>  comment "----------------------------------------------------"
>  endif
>
> +config BR2_PACKAGE_LIBFSLVPUWRAP
> +       bool "libfslvpuwrap has been renamed to imx-vpuwrap"
> +       select BR2_LEGACY
> +       select BR2_PACKAGE_IMX_VPUWRAP
> +       help
> +         The libfslvpuwrap has been renamed to match the renamed package.
> +

Same as imx-codec and imx-parser, I think this section is misplaced.

Also, it seems that packages depending on this package haven't been
updated (gst-fsl-plugins and kodi).

Regards,
Gary

[Buildroot] [PATCH 07/10] imx-gpu-viv: bump version to 5.0.11-p8.3

[Andrew Webster]

Changelog:
Software floating point is no longer supported.

For a detailed list of changes in this update, see the Graphics section of
the i.MX Linux Release Notes contained in the i.MX Linux BSP documentation
here:

https://www.nxp.com/webapp/Download?colCode=L4.1.15_1.0.0_LINUX_DOCS&location=null&fpsp=1&WT_TYPE=Supporting%20Information&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=gz&WT_ASSET=Documentation&fileExt=.gz&Parent_nodeId=1337637154535695831062&Parent_pageType=product

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/b667ed4

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
 package/freescale-imx/imx-gpu-viv/Config.in        |  6 +++++-
 package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash |  4 +---
 package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk   | 10 +++-------
 3 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/package/freescale-imx/imx-gpu-viv/Config.in b/package/freescale-imx/imx-gpu-viv/Config.in
index 20759b1..9a7cf56 100644
--- a/package/freescale-imx/imx-gpu-viv/Config.in
+++ b/package/freescale-imx/imx-gpu-viv/Config.in
@@ -2,12 +2,16 @@ comment "imx-gpu-viv needs an (e)glibc toolchain"
 	depends on BR2_arm
 	depends on !BR2_TOOLCHAIN_USES_GLIBC
 
+comment "imx-gpu-viv needs EABIhf"
+	depends on BR2_arm
+	depends on !BR2_ARM_EABIHF
+
 config BR2_PACKAGE_IMX_GPU_VIV
 	bool "imx-gpu-viv"
 	select BR2_PACKAGE_HAS_LIBEGL
 	select BR2_PACKAGE_HAS_LIBGLES
 	select BR2_PACKAGE_HAS_LIBOPENVG
-	depends on BR2_arm # Only relevant for i.MX6
+	depends on BR2_ARM_EABIHF # Only relevant for EABIhf i.MX6
 	# Library binaries are linked against libc.so.6
 	depends on BR2_TOOLCHAIN_USES_GLIBC
 	help
diff --git a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash
index 4119388..4fce3f8 100644
--- a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash
+++ b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash
@@ -1,3 +1 @@
-# locally computed
-sha256	3ea201f91ce9b56455e4983ab1055e8175415fbbf2800dc097d47e78ceefba34  imx-gpu-viv-5.0.11.p7.4-sfp.bin
-sha256	b80838104f2f2e3b0baf2f1aacdca263c1c92589ce919b3be40aaad23f686b7f  imx-gpu-viv-5.0.11.p7.4-hfp.bin
+sha256	0400f19dce7223e046ca693cae8578201904c8e7bdcf0c444a6114afa14f09fe  imx-gpu-viv-5.0.11.p8.3-hfp.bin
diff --git a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk
index b51a7af..513dcf0 100644
--- a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk
+++ b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk
@@ -4,19 +4,15 @@
 #
 ################################################################################
 
-IMX_GPU_VIV_BASE_VERSION = 5.0.11.p7.4
-ifeq ($(BR2_ARM_EABIHF),y)
+IMX_GPU_VIV_BASE_VERSION = 5.0.11.p8.3
 IMX_GPU_VIV_VERSION = $(IMX_GPU_VIV_BASE_VERSION)-hfp
-else
-IMX_GPU_VIV_VERSION = $(IMX_GPU_VIV_BASE_VERSION)-sfp
-endif
 IMX_GPU_VIV_SITE = $(FREESCALE_IMX_SITE)
 IMX_GPU_VIV_SOURCE = imx-gpu-viv-$(IMX_GPU_VIV_VERSION).bin
 
 IMX_GPU_VIV_INSTALL_STAGING = YES
 
-IMX_GPU_VIV_LICENSE = Freescale Semiconductor Software License Agreement
-IMX_GPU_VIV_LICENSE_FILES = EULA
+IMX_GPU_VIV_LICENSE = NXP Semiconductor Software License Agreement
+IMX_GPU_VIV_LICENSE_FILES = EULA COPYING
 IMX_GPU_VIV_REDISTRIBUTE = NO
 
 IMX_GPU_VIV_PROVIDES = libegl libgles libopenvg
-- 
1.9.1

[Buildroot] [PATCH 07/10] imx-gpu-viv: bump version to 5.0.11-p8.3

[Gary Bisson]

Andrew, All,

On Fri, Jun 3, 2016 at 3:12 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> Software floating point is no longer supported.
>
> For a detailed list of changes in this update, see the Graphics section of
> the i.MX Linux Release Notes contained in the i.MX Linux BSP documentation
> here:
>
> https://www.nxp.com/webapp/Download?colCode=L4.1.15_1.0.0_LINUX_DOCS&location=null&fpsp=1&WT_TYPE=Supporting%20Information&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=gz&WT_ASSET=Documentation&fileExt=.gz&Parent_nodeId=1337637154535695831062&Parent_pageType=product
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/b667ed4

I actually recommend going straight to version p8.4 since it brings
its fair share of bug fixes:
http://git.freescale.com/git/cgit.cgi/imx/fsl-arm-yocto-bsp.git/tree/GraphicsChangeLog?h=imx-3.14.52-1.1.0_ga
https://github.com/Freescale/meta-fsl-arm/commit/af5b3a6c

Also, as said in the cover letter, this patch should be followed by
the kernel module update.
https://github.com/Freescale/meta-fsl-arm/commit/c9c30c56

Regards,
Gary

[Buildroot] [PATCH 08/10] libimxvpuapi: bump version to 0.10.2

[Andrew Webster]

Changelog:
- fix AUD NAL positioning in h.264 encoder output
  (SPS/PPS/AUD were ordered incorrectly - AUD has to come first, not last)
- fix build error with examples when --enable-static is used
- pass quality factor in simplified JPEG encoder interface correctly
- add functions for querying and setting header data
  useful for modifying headers, like VUI data in the SPS RBSP
- documentation updates

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/c999668

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
 package/libimxvpuapi/libimxvpuapi.hash | 2 +-
 package/libimxvpuapi/libimxvpuapi.mk   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/package/libimxvpuapi/libimxvpuapi.hash b/package/libimxvpuapi/libimxvpuapi.hash
index fd90a20..c8cabcf 100644
--- a/package/libimxvpuapi/libimxvpuapi.hash
+++ b/package/libimxvpuapi/libimxvpuapi.hash
@@ -1,2 +1,2 @@
 # locally computed hash
-sha256 8d7aeed88c06fda44318cef9565ae47b86461bd309908b1103a7974ed0822a8d  libimxvpuapi-0.10.1.tar.gz
+sha256 8e6dc4105db6164c0de72fd60eb73f4ba1632f7ba5052b1abc834b462b566da2  libimxvpuapi-0.10.2.tar.gz
diff --git a/package/libimxvpuapi/libimxvpuapi.mk b/package/libimxvpuapi/libimxvpuapi.mk
index e0d8cc9..df84806 100644
--- a/package/libimxvpuapi/libimxvpuapi.mk
+++ b/package/libimxvpuapi/libimxvpuapi.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBIMXVPUAPI_VERSION = 0.10.1
+LIBIMXVPUAPI_VERSION = 0.10.2
 LIBIMXVPUAPI_SITE = $(call github,Freescale,libimxvpuapi,$(LIBIMXVPUAPI_VERSION))
 LIBIMXVPUAPI_LICENSE = LGPLv2.1+
 LIBIMXVPUAPI_LICENSE_FILES = LICENSE
-- 
1.9.1

[Buildroot] [PATCH 08/10] libimxvpuapi: bump version to 0.10.2

[Gary Bisson]

Andrew, All,

On Fri, Jun 3, 2016 at 3:12 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> - fix AUD NAL positioning in h.264 encoder output
>   (SPS/PPS/AUD were ordered incorrectly - AUD has to come first, not last)
> - fix build error with examples when --enable-static is used
> - pass quality factor in simplified JPEG encoder interface correctly
> - add functions for querying and setting header data
>   useful for modifying headers, like VUI data in the SPS RBSP
> - documentation updates
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/c999668
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>

Regards,
Gary

[Buildroot] [PATCH 09/10] imx-lib: bump version to 5.4

[Andrew Webster]

Changelog:
- Remove platform check in hdmi-cec and imx-lib - simplify to support builds
on multiple machines
- For ipu use the dummy defaul object to fix build issues on non-ipu hardware

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/7946533

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
 package/freescale-imx/imx-lib/imx-lib.hash | 2 +-
 package/freescale-imx/imx-lib/imx-lib.mk   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/package/freescale-imx/imx-lib/imx-lib.hash b/package/freescale-imx/imx-lib/imx-lib.hash
index 8e4bd73..76dcb23 100644
--- a/package/freescale-imx/imx-lib/imx-lib.hash
+++ b/package/freescale-imx/imx-lib/imx-lib.hash
@@ -1,2 +1,2 @@
 # locally computed
-sha256 2b4547ffb1de328cf8997a09a423c6f015d808493efd11a98a5d42c6497e3445  imx-lib-5.1.tar.gz
+sha256 8d12c4a0a44d29569f1ead3a36adc28402b9c4036b53e11dd3ebf2295e3ce1d0  imx-lib-5.4.tar.gz
diff --git a/package/freescale-imx/imx-lib/imx-lib.mk b/package/freescale-imx/imx-lib/imx-lib.mk
index b49357b..d3603ca 100644
--- a/package/freescale-imx/imx-lib/imx-lib.mk
+++ b/package/freescale-imx/imx-lib/imx-lib.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-IMX_LIB_VERSION = 5.1
+IMX_LIB_VERSION = 5.4
 IMX_LIB_SITE = $(FREESCALE_IMX_SITE)
 IMX_LIB_LICENSE = LGPLv2.1+
 IMX_LIB_LICENSE_FILES = COPYING-LGPL-2.1
-- 
1.9.1

[Buildroot] [PATCH 09/10] imx-lib: bump version to 5.4

[Gary Bisson]

Andrew, All,

On Fri, Jun 3, 2016 at 3:12 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> - Remove platform check in hdmi-cec and imx-lib - simplify to support builds
> on multiple machines
> - For ipu use the dummy defaul object to fix build issues on non-ipu hardware
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/7946533
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>

Regards,
Gary

[Buildroot] [PATCH 10/10] xdriver_xf86-video-imx-viv: bump version to 5.0.11-p8.3

[Andrew Webster]

Remove upstreamed patch.
Add patch from Yocto to not use git for versioning.

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/06a0574

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
 .../0001-Remove-dix-internal-header-usage.patch    | 31 --------
 ...001-Stop-using-Git-to-write-local-version.patch | 87 ++++++++++++++++++++++
 .../xdriver_xf86-video-imx-viv.hash                |  3 +-
 .../xdriver_xf86-video-imx-viv.mk                  |  2 +-
 4 files changed, 89 insertions(+), 34 deletions(-)
 delete mode 100644 package/x11r7/xdriver_xf86-video-imx-viv/0001-Remove-dix-internal-header-usage.patch
 create mode 100644 package/x11r7/xdriver_xf86-video-imx-viv/0001-Stop-using-Git-to-write-local-version.patch

diff --git a/package/x11r7/xdriver_xf86-video-imx-viv/0001-Remove-dix-internal-header-usage.patch b/package/x11r7/xdriver_xf86-video-imx-viv/0001-Remove-dix-internal-header-usage.patch
deleted file mode 100644
index f146ba3..0000000
--- a/package/x11r7/xdriver_xf86-video-imx-viv/0001-Remove-dix-internal-header-usage.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 80c419dddf6483873503d90694c4b4ae34ffa5e4 Mon Sep 17 00:00:00 2001
-From: Otavio Salvador <otavio@ossystems.com.br>
-Date: Wed, 2 Dec 2015 13:50:57 +0000
-Subject: [PATCH] Remove 'dix' internal header usage
-Organization: O.S. Systems Software LTDA.
-
-The 'swaprep.h' is an internal Xorg header and is not being installed
-anymore. The swap features are provided by the 'misc.h' header now.
-
-Upstream-Status: Pending
-
-Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
----
- EXA/src/vivante_extension/vivante_ext.c | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/EXA/src/vivante_extension/vivante_ext.c b/EXA/src/vivante_extension/vivante_ext.c
-index 0d1085b..1ffbb1b 100644
---- a/EXA/src/vivante_extension/vivante_ext.c
-+++ b/EXA/src/vivante_extension/vivante_ext.c
-@@ -40,7 +40,6 @@
- #include "cursorstr.h"
- #include "scrnintstr.h"
- #include "servermd.h"
--#include "swaprep.h"
- #include "drm.h"
- #include "xf86Module.h"
- #include "globals.h"
--- 
-2.1.4
-
diff --git a/package/x11r7/xdriver_xf86-video-imx-viv/0001-Stop-using-Git-to-write-local-version.patch b/package/x11r7/xdriver_xf86-video-imx-viv/0001-Stop-using-Git-to-write-local-version.patch
new file mode 100644
index 0000000..f541e5c
--- /dev/null
+++ b/package/x11r7/xdriver_xf86-video-imx-viv/0001-Stop-using-Git-to-write-local-version.patch
@@ -0,0 +1,87 @@
+From 69a92f4576a1e789ba2fcf957164d2c4013020c5 Mon Sep 17 00:00:00 2001
+From: Otavio Salvador <otavio@ossystems.com.br>
+Date: Wed, 2 Dec 2015 13:36:25 +0000
+Subject: [PATCH] Stop using Git to write local version
+Organization: O.S. Systems Software LTDA.
+
+The standard version does not use a Git repository so we should not
+use Git to identify the commit of the build as it can end getting the
+version from a wrong repository and can be misleading.
+
+Upstream-Status: Pending
+
+Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
+---
+ EXA/src/makefile.tc         | 6 +++---
+ FslExt/src/makefile.tc      | 6 +++---
+ util/autohdmi/makefile.tc   | 6 +++---
+ util/pandisplay/makefile.tc | 6 +++---
+ 4 files changed, 12 insertions(+), 12 deletions(-)
+
+diff --git a/EXA/src/makefile.tc b/EXA/src/makefile.tc
+index 0b9a9e6..ec6e68d 100644
+--- a/EXA/src/makefile.tc
++++ b/EXA/src/makefile.tc
+@@ -52,8 +52,8 @@ prefix ?= /usr
+ sysroot ?= /
+ 
+ # get git commit number
+-COMMITNR := `git log -n 1 --format=%H`
+-DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
+-LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
++#COMMITNR := `git log -n 1 --format=%H`
++#DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
++#LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
+ 
+ 
+diff --git a/FslExt/src/makefile.tc b/FslExt/src/makefile.tc
+index 0b9a9e6..ec6e68d 100644
+--- a/FslExt/src/makefile.tc
++++ b/FslExt/src/makefile.tc
+@@ -52,8 +52,8 @@ prefix ?= /usr
+ sysroot ?= /
+ 
+ # get git commit number
+-COMMITNR := `git log -n 1 --format=%H`
+-DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
+-LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
++#COMMITNR := `git log -n 1 --format=%H`
++#DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
++#LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
+ 
+ 
+diff --git a/util/autohdmi/makefile.tc b/util/autohdmi/makefile.tc
+index c9de0a6..d0a468c 100644
+--- a/util/autohdmi/makefile.tc
++++ b/util/autohdmi/makefile.tc
+@@ -64,8 +64,8 @@ prefix ?= /usr
+ sysroot ?= /
+ 
+ # get git commit number
+-COMMITNR := `git log -n 1 --format=%H`
+-DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
+-LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
++#COMMITNR := `git log -n 1 --format=%H`
++#DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
++#LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
+ 
+ 
+diff --git a/util/pandisplay/makefile.tc b/util/pandisplay/makefile.tc
+index 28732b9..bf54c20 100644
+--- a/util/pandisplay/makefile.tc
++++ b/util/pandisplay/makefile.tc
+@@ -64,8 +64,8 @@ prefix ?= /usr
+ sysroot ?= /
+ 
+ # get git commit number
+-COMMITNR := `git log -n 1 --format=%H`
+-DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
+-LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
++#COMMITNR := `git log -n 1 --format=%H`
++#DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
++#LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
+ 
+ 
+-- 
+2.1.4
+
diff --git a/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.hash b/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.hash
index 9a16569..9b85e0c 100644
--- a/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.hash
+++ b/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.hash
@@ -1,2 +1 @@
-# locally computed
-sha256	3effaf42bde64da8fad2dfe0dcef12d1cfbbbe189511dbd4612442129fd832cc  xserver-xorg-video-imx-viv-5.0.11.p7.4.tar.gz
+sha256	00b4925819601461c0aa293a25024709410ab8d669accfa71ffd3177ff3cdeb2  xserver-xorg-video-imx-viv-5.0.11.p8.3.tar.gz
diff --git a/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.mk b/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.mk
index a1b32b1..1f1bc0c 100644
--- a/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.mk
+++ b/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-XDRIVER_XF86_VIDEO_IMX_VIV_VERSION = 5.0.11.p7.4
+XDRIVER_XF86_VIDEO_IMX_VIV_VERSION = 5.0.11.p8.3
 XDRIVER_XF86_VIDEO_IMX_VIV_SITE = $(FREESCALE_IMX_SITE)
 XDRIVER_XF86_VIDEO_IMX_VIV_SOURCE = xserver-xorg-video-imx-viv-$(XDRIVER_XF86_VIDEO_IMX_VIV_VERSION).tar.gz
 XDRIVER_XF86_VIDEO_IMX_VIV_DEPENDENCIES = imx-gpu-viv xserver_xorg-server \
-- 
1.9.1

[Buildroot] [PATCH 10/10] xdriver_xf86-video-imx-viv: bump version to 5.0.11-p8.3

[Gary Bisson]

Andrew, All,

On Fri, Jun 3, 2016 at 3:13 PM, Andrew Webster <awebster@arcx.com> wrote:
> Remove upstreamed patch.
> Add patch from Yocto to not use git for versioning.
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/06a0574

Same as imx-gpu-viv package, I think we should go straight to version
p8.4. Also, can you re-order your patches to have this one after
imx-gpu-viv, just trying to have multimedia updates on one side and
then graphics update. Especially now that graphics can be updated
separately.

Finally, I forgot to mention it in my cover letter answer, please cc
me to the v2 series.

Regards,
Gary

[Buildroot] [PATCH 00/10] Bump NXP package versions

[Gary Bisson]

Andrew, All,

First of all, thank you for taking care of this update. It's good to
have someone else looking at those ;-)

On Fri, Jun 3, 2016 at 3:10 PM, Andrew Webster <awebster@arcx.com> wrote:
> The following packages were renamed:
>  libfslcodec -> imx-codec
>  libfslparser -> imx-parser
>  libfslvpuwrap -> imx-vpuwrap
> In addition to renaming, I also moved them into the freescale-imx directory
> which seems consistent with other similarily named packages (although that
> directory may be due for a rename now too).  Not sure if this was appropriate
> or not.

I'm ok moving things to freescale-imx, I think it makes it easier for
people looking at i.MX-specific packages instead of browsing through
both hardware handling packages and multimedia libraries.
However I guess Thomas and/or Peter will have ack this change.

As for changing the 'freescale-imx' name, I agree this will need to
happen but there's no rush in my opinion. Especially since the Yocto
layer is still called meta-*fsl*-arm.

> Andrew Webster (10):
>   firmware-imx: bump to version 5.4
>   gst1-imx: bump to version 0.12.1
>   imx-vpu: bump to version 5.4.33
>   imx-codec: rename from libfslcodec and bump version to 4.0.9
>   imx-parser: rename from libfslparser and bump version to 4.0.9
>   imx-vpuwrap: rename from libfslvpuwrap and bump version to 1.0.65
>   imx-gpu-viv: bump version to 5.0.11-p8.3
>   libimxvpuapi: bump version to 0.10.2
>   imx-lib: bump version to 5.4
>   xdriver_xf86-video-imx-viv: bump version to 5.0.11-p8.3

I will comment on each individual patch above but I have a couple of questions:
- Why isn't there the kernel-module-imx-gpu-viv update? It is very
important to keep it in line with imx-gpu-viv.
- What about imx-kobs?
- Can you share your testing setup (platform name + defconfig)?

Regards,
Gary

[Buildroot] [PATCH 00/10] Bump NXP package versions

[Andrew Webster]

> -----Original Message-----
> From: Gary Bisson [mailto:gary.bisson at boundarydevices.com]
> Sent: Monday, June 06, 2016 10:32 AM
> To: Andrew Webster
> Cc: buildroot at buildroot.org
> Subject: Re: [Buildroot] [PATCH 00/10] Bump NXP package versions
> 
> Andrew, All,
> 
> First of all, thank you for taking care of this update. It's good to have
> someone else looking at those ;-)

Glad to help.  Thanks for all your work on these packages.

> 
> On Fri, Jun 3, 2016 at 3:10 PM, Andrew Webster <awebster@arcx.com>
> wrote:
> > The following packages were renamed:
> >  libfslcodec -> imx-codec
> >  libfslparser -> imx-parser
> >  libfslvpuwrap -> imx-vpuwrap
> > In addition to renaming, I also moved them into the freescale-imx
> > directory which seems consistent with other similarily named packages
> > (although that directory may be due for a rename now too).  Not sure
> > if this was appropriate or not.
> 
> I'm ok moving things to freescale-imx, I think it makes it easier for people
> looking at i.MX-specific packages instead of browsing through both hardware
> handling packages and multimedia libraries.
> However I guess Thomas and/or Peter will have ack this change.
> 
> As for changing the 'freescale-imx' name, I agree this will need to happen but
> there's no rush in my opinion. Especially since the Yocto layer is still called
> meta-*fsl*-arm.
> 
> > Andrew Webster (10):
> >   firmware-imx: bump to version 5.4
> >   gst1-imx: bump to version 0.12.1
> >   imx-vpu: bump to version 5.4.33
> >   imx-codec: rename from libfslcodec and bump version to 4.0.9
> >   imx-parser: rename from libfslparser and bump version to 4.0.9
> >   imx-vpuwrap: rename from libfslvpuwrap and bump version to 1.0.65
> >   imx-gpu-viv: bump version to 5.0.11-p8.3
> >   libimxvpuapi: bump version to 0.10.2
> >   imx-lib: bump version to 5.4
> >   xdriver_xf86-video-imx-viv: bump version to 5.0.11-p8.3
> 
> I will comment on each individual patch above but I have a couple of
> questions:
> - Why isn't there the kernel-module-imx-gpu-viv update? It is very important
> to keep it in line with imx-gpu-viv.

We don't use this (yet), so I didn't want to update it without testing it.

> - What about imx-kobs?

We also don't use this (no NAND on the board).  As above, I didn't want to update without testing.

I can certainly update these versions and confirm that they build, if someone else can test.

> - Can you share your testing setup (platform name + defconfig)?

Tested on a custom i.MX6Q board.  I used the freescale_imx6qsabresd defconfig, but with a different kernel and toolchain.

We are in the process of updating to the latest 4.1.15 kernel release.  I will update the gpu packages to p8.4 after that and resubmit.

> 
> Regards,
> Gary

Andrew

[Buildroot] [PATCH 00/10] Bump NXP package versions

[Gary Bisson]

Andrew, All,

On Mon, Jun 6, 2016 at 5:57 PM, Andrew Webster <Awebster@arcx.com> wrote:
>><snip>
>> I will comment on each individual patch above but I have a couple of
>> questions:
>> - Why isn't there the kernel-module-imx-gpu-viv update? It is very important
>> to keep it in line with imx-gpu-viv.
>
> We don't use this (yet), so I didn't want to update it without testing it.

Ok, but you can test it on any kernel though, it doesn't require any
modification. If you enable the option, it will remove the built-in
driver dynamically from your kernel configuration and use the module
instead.

>> - What about imx-kobs?
>
> We also don't use this (no NAND on the board).  As above, I didn't want to update without testing.
>
> I can certainly update these versions and confirm that they build, if someone else can test.

I never tested it either since I don't have any NAND on board, making
sure it builds fine is sufficient. Plus I've heard people using it
just fine so I'm not worried and it's still nice to have.

As a FYI, I think SabreAuto is the only one that offers NAND.

>> - Can you share your testing setup (platform name + defconfig)?
>
> Tested on a custom i.MX6Q board.  I used the freescale_imx6qsabresd defconfig, but with a different kernel and toolchain.
>
> We are in the process of updating to the latest 4.1.15 kernel release.  I will update the gpu packages to p8.4 after that and resubmit.

Ok good, thanks for the details.

Thanks,
Gary

[Buildroot] [PATCH 00/10] Bump NXP package versions

[Thomas Petazzoni]

Hello,

On Mon, 6 Jun 2016 16:32:28 +0200, Gary Bisson wrote:

> First of all, thank you for taking care of this update. It's good to
> have someone else looking at those ;-)

And thanks to you for reviewing!

> I'm ok moving things to freescale-imx, I think it makes it easier for
> people looking at i.MX-specific packages instead of browsing through
> both hardware handling packages and multimedia libraries.
> However I guess Thomas and/or Peter will have ack this change.

We normally want all packages to be directly under package/, precisely
because it is easier to find them this way.

The only case where we accept to have sub-directories for groups of
packages is when several packages need to share some variables, like
package/qt5/qt5.mk.

For freescale-imx stuff, it seems like the only variable left shared by
various packages in FREESCALE_IMX_SITE, and in fact it's already used
outside of package/freescale-imx/.

So I would almost suggest to get rid of the sub-directory, and move
this variable, as well as the other macro defined in freescale-imx.mk
to another file, though I'm not sure which one.

Peter?

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH 00/10] Bump NXP package versions

[Thomas Petazzoni]

Hello,

On Fri, 3 Jun 2016 09:10:30 -0400, Andrew Webster wrote:

> Andrew Webster (10):
>   firmware-imx: bump to version 5.4
>   gst1-imx: bump to version 0.12.1
>   imx-vpu: bump to version 5.4.33
>   imx-codec: rename from libfslcodec and bump version to 4.0.9
>   imx-parser: rename from libfslparser and bump version to 4.0.9
>   imx-vpuwrap: rename from libfslvpuwrap and bump version to 1.0.65
>   imx-gpu-viv: bump version to 5.0.11-p8.3
>   libimxvpuapi: bump version to 0.10.2
>   imx-lib: bump version to 5.4
>   xdriver_xf86-video-imx-viv: bump version to 5.0.11-p8.3

Thanks a lot for this work! Since you've received several comments from
Gary, I've marked your patch series as "Changes Requested" in our patch
tracking system (which helps us to not lose and forget patches).

Could you send an updated version of your patch series after reworking
it to take into account Gary's comments?

Thanks a lot!

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH v2 00/14] Bump NXP package versions

[Andrew Webster]

The two patches for nxp defconfigs and the patch for imx-kobs have been build
tested but not run-time tested.

Changes v1 -> v2:
  - Reordered patches to keep gpu related patches together and multimedia
  patches together.
  - Added patches for bumping the kernel/u-boot versions of NXP defconfigs
  - Added patch to bump version of imx-kobs
  - Added patch to bump version of kernel-module-imx-gpu-viv

Andrew Webster (14):
  nxp defconfigs: bump u-boot version to 4.1.15_1.1.0_ga
  nxp defconfigs: bump kernel version to 4.1.15
  kernel-module-imx-gpu-viv: bump version to that of the 5.0.11.p8.4
    release
  imx-gpu-viv: bump version to 5.0.11-p8.4
  xdriver_xf86-video-imx-viv: bump version to 5.0.11-p8.4
  firmware-imx: bump to version 5.4
  gst1-imx: bump to version 0.12.1
  imx-vpu: bump to version 5.4.33
  imx-codec: rename from libfslcodec and bump version to 4.0.9
  imx-parser: rename from libfslparser and bump version to 4.0.9
  imx-vpuwrap: rename from libfslvpuwrap and bump version to 1.0.65
  libimxvpuapi: bump version to 0.10.2
  imx-lib: bump version to 5.4
  imx-kobs: bump version to 5.4

 Config.in.legacy                                   | 21 ++++++
 configs/freescale_imx6dlsabreauto_defconfig        |  8 +-
 configs/freescale_imx6dlsabresd_defconfig          |  8 +-
 configs/freescale_imx6qsabreauto_defconfig         |  8 +-
 configs/freescale_imx6qsabresd_defconfig           |  8 +-
 configs/freescale_imx6sololiteevk_defconfig        |  8 +-
 configs/freescale_imx6sxsabresd_defconfig          |  8 +-
 configs/freescale_imx6ulevk_defconfig              |  8 +-
 package/Config.in                                  |  3 -
 package/freescale-imx/Config.in                    |  3 +
 .../freescale-imx/firmware-imx/firmware-imx.hash   |  2 +-
 package/freescale-imx/firmware-imx/firmware-imx.mk |  5 +-
 .../imx-codec}/Config.in                           |  6 +-
 package/freescale-imx/imx-codec/imx-codec.hash     |  2 +
 package/freescale-imx/imx-codec/imx-codec.mk       | 23 ++++++
 package/freescale-imx/imx-gpu-viv/Config.in        |  6 +-
 package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash |  4 +-
 package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk   | 10 +--
 package/freescale-imx/imx-kobs/imx-kobs.hash       |  3 +-
 package/freescale-imx/imx-kobs/imx-kobs.mk         |  2 +-
 package/freescale-imx/imx-lib/imx-lib.hash         |  2 +-
 package/freescale-imx/imx-lib/imx-lib.mk           |  2 +-
 .../imx-parser}/Config.in                          |  4 +-
 package/freescale-imx/imx-parser/imx-parser.hash   |  2 +
 package/freescale-imx/imx-parser/imx-parser.mk     | 23 ++++++
 package/freescale-imx/imx-vpu/imx-vpu.hash         |  2 +-
 package/freescale-imx/imx-vpu/imx-vpu.mk           |  4 +-
 .../imx-vpuwrap}/Config.in                         |  8 +-
 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash |  2 +
 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk   | 21 ++++++
 .../kernel-module-imx-gpu-viv.hash                 |  2 +-
 .../kernel-module-imx-gpu-viv.mk                   |  2 +-
 package/gstreamer/gst-fsl-plugins/Config.in        |  8 +-
 .../gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk   |  4 +-
 package/gstreamer1/gst1-imx/Config.in              |  2 +-
 package/gstreamer1/gst1-imx/gst1-imx.hash          |  2 +-
 package/gstreamer1/gst1-imx/gst1-imx.mk            |  6 +-
 package/kodi/kodi.mk                               |  4 +-
 package/libfslcodec/libfslcodec.hash               |  2 -
 package/libfslcodec/libfslcodec.mk                 | 23 ------
 package/libfslparser/libfslparser.hash             |  2 -
 package/libfslparser/libfslparser.mk               | 23 ------
 package/libfslvpuwrap/libfslvpuwrap.hash           |  2 -
 package/libfslvpuwrap/libfslvpuwrap.mk             | 21 ------
 package/libimxvpuapi/libimxvpuapi.hash             |  2 +-
 package/libimxvpuapi/libimxvpuapi.mk               |  2 +-
 .../0001-Remove-dix-internal-header-usage.patch    | 31 --------
 ...001-Stop-using-Git-to-write-local-version.patch | 87 ++++++++++++++++++++++
 .../xdriver_xf86-video-imx-viv.hash                |  3 +-
 .../xdriver_xf86-video-imx-viv.mk                  |  2 +-
 50 files changed, 259 insertions(+), 187 deletions(-)
 rename package/{libfslcodec => freescale-imx/imx-codec}/Config.in (75%)
 create mode 100644 package/freescale-imx/imx-codec/imx-codec.hash
 create mode 100644 package/freescale-imx/imx-codec/imx-codec.mk
 rename package/{libfslparser => freescale-imx/imx-parser}/Config.in (78%)
 create mode 100644 package/freescale-imx/imx-parser/imx-parser.hash
 create mode 100644 package/freescale-imx/imx-parser/imx-parser.mk
 rename package/{libfslvpuwrap => freescale-imx/imx-vpuwrap}/Config.in (69%)
 create mode 100644 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash
 create mode 100644 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk
 delete mode 100644 package/libfslcodec/libfslcodec.hash
 delete mode 100644 package/libfslcodec/libfslcodec.mk
 delete mode 100644 package/libfslparser/libfslparser.hash
 delete mode 100644 package/libfslparser/libfslparser.mk
 delete mode 100644 package/libfslvpuwrap/libfslvpuwrap.hash
 delete mode 100644 package/libfslvpuwrap/libfslvpuwrap.mk
 delete mode 100644 package/x11r7/xdriver_xf86-video-imx-viv/0001-Remove-dix-internal-header-usage.patch
 create mode 100644 package/x11r7/xdriver_xf86-video-imx-viv/0001-Stop-using-Git-to-write-local-version.patch

-- 
1.9.1

[Buildroot] [PATCH v2 01/14] nxp defconfigs: bump u-boot version to 4.1.15_1.1.0_ga

[Andrew Webster]

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
Changes v1 -> v2:
  - added to patch set

 configs/freescale_imx6dlsabreauto_defconfig | 2 +-
 configs/freescale_imx6dlsabresd_defconfig   | 2 +-
 configs/freescale_imx6qsabreauto_defconfig  | 2 +-
 configs/freescale_imx6qsabresd_defconfig    | 2 +-
 configs/freescale_imx6sololiteevk_defconfig | 2 +-
 configs/freescale_imx6sxsabresd_defconfig   | 2 +-
 configs/freescale_imx6ulevk_defconfig       | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/configs/freescale_imx6dlsabreauto_defconfig b/configs/freescale_imx6dlsabreauto_defconfig
index 699e684..f55d4fa 100644
--- a/configs/freescale_imx6dlsabreauto_defconfig
+++ b/configs/freescale_imx6dlsabreauto_defconfig
@@ -31,4 +31,4 @@ BR2_TARGET_UBOOT_BOARDNAME="mx6dlsabreauto"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_4.1.15_1.1.0_ga"
diff --git a/configs/freescale_imx6dlsabresd_defconfig b/configs/freescale_imx6dlsabresd_defconfig
index b6d31e0..bec80b5 100644
--- a/configs/freescale_imx6dlsabresd_defconfig
+++ b/configs/freescale_imx6dlsabresd_defconfig
@@ -31,4 +31,4 @@ BR2_TARGET_UBOOT_BOARDNAME="mx6dlsabresd"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_4.1.15_1.1.0_ga"
diff --git a/configs/freescale_imx6qsabreauto_defconfig b/configs/freescale_imx6qsabreauto_defconfig
index 23ca2dc..2b89541 100644
--- a/configs/freescale_imx6qsabreauto_defconfig
+++ b/configs/freescale_imx6qsabreauto_defconfig
@@ -31,4 +31,4 @@ BR2_TARGET_UBOOT_BOARDNAME="mx6qsabreauto"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_4.1.15_1.1.0_ga"
diff --git a/configs/freescale_imx6qsabresd_defconfig b/configs/freescale_imx6qsabresd_defconfig
index bf446a3..ec8f265 100644
--- a/configs/freescale_imx6qsabresd_defconfig
+++ b/configs/freescale_imx6qsabresd_defconfig
@@ -31,4 +31,4 @@ BR2_TARGET_UBOOT_BOARDNAME="mx6qsabresd"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_4.1.15_1.1.0_ga"
diff --git a/configs/freescale_imx6sololiteevk_defconfig b/configs/freescale_imx6sololiteevk_defconfig
index 72a1e2d..db68d79 100644
--- a/configs/freescale_imx6sololiteevk_defconfig
+++ b/configs/freescale_imx6sololiteevk_defconfig
@@ -28,4 +28,4 @@ BR2_TARGET_UBOOT_BOARDNAME="mx6slevk"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_4.1.15_1.1.0_ga"
diff --git a/configs/freescale_imx6sxsabresd_defconfig b/configs/freescale_imx6sxsabresd_defconfig
index 943528b..7437b63 100644
--- a/configs/freescale_imx6sxsabresd_defconfig
+++ b/configs/freescale_imx6sxsabresd_defconfig
@@ -28,5 +28,5 @@ BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6sxsabresd"
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_4.1.15_1.1.0_ga"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
diff --git a/configs/freescale_imx6ulevk_defconfig b/configs/freescale_imx6ulevk_defconfig
index fbb420e..cd27335 100644
--- a/configs/freescale_imx6ulevk_defconfig
+++ b/configs/freescale_imx6ulevk_defconfig
@@ -22,7 +22,7 @@ BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="mx6ul_14x14_evk"
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_4.1.15_1.1.0_ga"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
 
 # required tools to create the microSD image
-- 
1.9.1

[Buildroot] [PATCH v2 01/14] nxp defconfigs: bump u-boot version to 4.1.15_1.1.0_ga

[Gary Bisson]

Andrew, All,

On Fri, Jun 10, 2016 at 8:09 PM, Andrew Webster <awebster@arcx.com> wrote:
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>

Regards,
Gary

[Buildroot] [PATCH v2 02/14] nxp defconfigs: bump kernel version to 4.1.15

[Andrew Webster]

There is a 1.1.0_ga release, and a 1.1.1_patch release. The
patch release appears to be only for i.MX6UL, so it is bumped
to 1.1.1_patch, while the other are 1.1.0_ga.

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
Changes v1 -> v2:
  - added to patch set

 configs/freescale_imx6dlsabreauto_defconfig | 6 +++---
 configs/freescale_imx6dlsabresd_defconfig   | 6 +++---
 configs/freescale_imx6qsabreauto_defconfig  | 6 +++---
 configs/freescale_imx6qsabresd_defconfig    | 6 +++---
 configs/freescale_imx6sololiteevk_defconfig | 6 +++---
 configs/freescale_imx6sxsabresd_defconfig   | 6 +++---
 configs/freescale_imx6ulevk_defconfig       | 6 +++---
 7 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/configs/freescale_imx6dlsabreauto_defconfig b/configs/freescale_imx6dlsabreauto_defconfig
index f55d4fa..a58ab5d 100644
--- a/configs/freescale_imx6dlsabreauto_defconfig
+++ b/configs/freescale_imx6dlsabreauto_defconfig
@@ -5,8 +5,8 @@ BR2_cortex_a9=y
 # patches
 BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches"
 
-# Linux headers same as kernel, a 3.14 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y
+# Linux headers same as kernel, a 4.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
 
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
@@ -15,7 +15,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.1.15_1.1.0_ga"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
diff --git a/configs/freescale_imx6dlsabresd_defconfig b/configs/freescale_imx6dlsabresd_defconfig
index bec80b5..ecb5f8b 100644
--- a/configs/freescale_imx6dlsabresd_defconfig
+++ b/configs/freescale_imx6dlsabresd_defconfig
@@ -5,8 +5,8 @@ BR2_cortex_a9=y
 # patches
 BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches"
 
-# Linux headers same as kernel, a 3.14 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y
+# Linux headers same as kernel, a 4.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
 
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
@@ -15,7 +15,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.1.15_1.1.0_ga"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
diff --git a/configs/freescale_imx6qsabreauto_defconfig b/configs/freescale_imx6qsabreauto_defconfig
index 2b89541..6ed33ee 100644
--- a/configs/freescale_imx6qsabreauto_defconfig
+++ b/configs/freescale_imx6qsabreauto_defconfig
@@ -5,8 +5,8 @@ BR2_cortex_a9=y
 # patches
 BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches"
 
-# Linux headers same as kernel, a 3.14 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y
+# Linux headers same as kernel, a 4.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
 
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
@@ -15,7 +15,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.1.15_1.1.0_ga"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
diff --git a/configs/freescale_imx6qsabresd_defconfig b/configs/freescale_imx6qsabresd_defconfig
index ec8f265..bd01f05 100644
--- a/configs/freescale_imx6qsabresd_defconfig
+++ b/configs/freescale_imx6qsabresd_defconfig
@@ -5,8 +5,8 @@ BR2_cortex_a9=y
 # patches
 BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches"
 
-# Linux headers same as kernel, a 3.14 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y
+# Linux headers same as kernel, a 4.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
 
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
@@ -15,7 +15,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.1.15_1.1.0_ga"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
diff --git a/configs/freescale_imx6sololiteevk_defconfig b/configs/freescale_imx6sololiteevk_defconfig
index db68d79..18043e8 100644
--- a/configs/freescale_imx6sololiteevk_defconfig
+++ b/configs/freescale_imx6sololiteevk_defconfig
@@ -2,8 +2,8 @@
 BR2_arm=y
 BR2_cortex_a9=y
 
-# Linux headers same as kernel, a 3.14 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y
+# Linux headers same as kernel, a 4.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
 
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
@@ -12,7 +12,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.1.15_1.1.0_ga"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x80008000"
diff --git a/configs/freescale_imx6sxsabresd_defconfig b/configs/freescale_imx6sxsabresd_defconfig
index 7437b63..2519f49 100644
--- a/configs/freescale_imx6sxsabresd_defconfig
+++ b/configs/freescale_imx6sxsabresd_defconfig
@@ -5,8 +5,8 @@ BR2_cortex_a9=y
 # patches
 BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches"
 
-# Linux headers same as kernel, a 3.14 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y
+# Linux headers same as kernel, a 4.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
 
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
@@ -15,7 +15,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.1.15_1.1.0_ga"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-sdb"
diff --git a/configs/freescale_imx6ulevk_defconfig b/configs/freescale_imx6ulevk_defconfig
index cd27335..5a18c1d 100644
--- a/configs/freescale_imx6ulevk_defconfig
+++ b/configs/freescale_imx6ulevk_defconfig
@@ -2,8 +2,8 @@
 BR2_arm=y
 BR2_cortex_a7=y
 
-# Linux headers same as kernel, a 3.14 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y
+# Linux headers same as kernel, a 4.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
 
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
@@ -12,7 +12,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.14.52_1.1.0_ga"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.1.15_1.1.1_patch"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ul-14x14-evk"
-- 
1.9.1

[Buildroot] [PATCH v2 02/14] nxp defconfigs: bump kernel version to 4.1.15

[Gary Bisson]

Andrew, All,

On Fri, Jun 10, 2016 at 8:09 PM, Andrew Webster <awebster@arcx.com> wrote:
> There is a 1.1.0_ga release, and a 1.1.1_patch release. The
> patch release appears to be only for i.MX6UL, so it is bumped
> to 1.1.1_patch, while the other are 1.1.0_ga.
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Although every variation of the mx6 is using the 1.1.0_ga revision in
the Yocto layer, I agree the 1.1.1_patch should be used for the mx6ul
evk since it adds three patches required to handle the 6UL CPU
frequencies properly.

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>

Regards,
Gary

[Buildroot] [PATCH v2 03/14] kernel-module-imx-gpu-viv: bump version to that of the 5.0.11.p8.4 release

[Andrew Webster]

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/c9c30c5

This package has been tested with the following commands with the
matching imx-gpu-viv library:
 # modprobe galcore
 # cd /usr/share/examples/viv_samples/vdk/
 # ./tutorial7

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
Changes v1 -> v2:
  - added to patch set

 .../kernel-module-imx-gpu-viv/kernel-module-imx-gpu-viv.hash            | 2 +-
 .../kernel-module-imx-gpu-viv/kernel-module-imx-gpu-viv.mk              | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/package/freescale-imx/kernel-module-imx-gpu-viv/kernel-module-imx-gpu-viv.hash b/package/freescale-imx/kernel-module-imx-gpu-viv/kernel-module-imx-gpu-viv.hash
index 0842c7a..6d810ea 100644
--- a/package/freescale-imx/kernel-module-imx-gpu-viv/kernel-module-imx-gpu-viv.hash
+++ b/package/freescale-imx/kernel-module-imx-gpu-viv/kernel-module-imx-gpu-viv.hash
@@ -1,2 +1,2 @@
 # locally computed
-sha256	971254d204f6c8f739d0a2094055cd0b8001dc7d366345f996b14a495f92459e  kernel-module-imx-gpu-viv-2b3290d1c1ce383e860a0fd6b53074848a848e65.tar.gz
+sha256	6618b36baefd591e94a41167fa50d325c3df473918bceef027ca5a067aa1cffd  kernel-module-imx-gpu-viv-aa83874b916cf5655cb90498b1ea5691537fdbc8.tar.gz
diff --git a/package/freescale-imx/kernel-module-imx-gpu-viv/kernel-module-imx-gpu-viv.mk b/package/freescale-imx/kernel-module-imx-gpu-viv/kernel-module-imx-gpu-viv.mk
index aad8e40..11c6768 100644
--- a/package/freescale-imx/kernel-module-imx-gpu-viv/kernel-module-imx-gpu-viv.mk
+++ b/package/freescale-imx/kernel-module-imx-gpu-viv/kernel-module-imx-gpu-viv.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-KERNEL_MODULE_IMX_GPU_VIV_VERSION = 2b3290d1c1ce383e860a0fd6b53074848a848e65
+KERNEL_MODULE_IMX_GPU_VIV_VERSION = aa83874b916cf5655cb90498b1ea5691537fdbc8
 KERNEL_MODULE_IMX_GPU_VIV_SITE = \
 	$(call github,Freescale,kernel-module-imx-gpu-viv,$(KERNEL_MODULE_IMX_GPU_VIV_VERSION))
 KERNEL_MODULE_IMX_GPU_VIV_LICENSE = GPLv2
-- 
1.9.1

[Buildroot] [PATCH v2 03/14] kernel-module-imx-gpu-viv: bump version to that of the 5.0.11.p8.4 release

[Gary Bisson]

Andrew, All,

On Fri, Jun 10, 2016 at 8:09 PM, Andrew Webster <awebster@arcx.com> wrote:
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/c9c30c5
>
> This package has been tested with the following commands with the
> matching imx-gpu-viv library:
>  # modprobe galcore
>  # cd /usr/share/examples/viv_samples/vdk/
>  # ./tutorial7
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>

Regards,
Gary

[Buildroot] [PATCH v2 04/14] imx-gpu-viv: bump version to 5.0.11-p8.4

[Andrew Webster]

Changelog:
Software floating point is no longer supported.

For a detailed list of changes in this update, see the Graphics section of
the i.MX Linux Release Notes contained in the i.MX Linux BSP documentation
here:

https://www.nxp.com/webapp/Download?colCode=L4.1.15_1.1.0_LINUX_DOCS&location=null&fpsp=1&WT_TYPE=Supporting%20Information&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=gz&WT_ASSET=Documentation&fileExt=.gz&Parent_nodeId=1337637154535695831062&Parent_pageType=product

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/b667ed4
https://github.com/Freescale/meta-fsl-arm/commit/af5b3a6

This package has been tested with both X11 and Framebuffer backends:
 # cd /usr/share/examples/viv_samples/vdk/
 # apitrace trace --api egl ./tutorial7
 # gmem_info
 ... display memory use per PID ...
 #?apitrace replay tutorial7.trace
 #?eglretrace tutorial7.trace

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
Changes v1 -> v2:
  - added test procedure to comment
  - updated from p8.3 to p8.4

 package/freescale-imx/imx-gpu-viv/Config.in        |  6 +++++-
 package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash |  4 +---
 package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk   | 10 +++-------
 3 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/package/freescale-imx/imx-gpu-viv/Config.in b/package/freescale-imx/imx-gpu-viv/Config.in
index 20759b1..9a7cf56 100644
--- a/package/freescale-imx/imx-gpu-viv/Config.in
+++ b/package/freescale-imx/imx-gpu-viv/Config.in
@@ -2,12 +2,16 @@ comment "imx-gpu-viv needs an (e)glibc toolchain"
 	depends on BR2_arm
 	depends on !BR2_TOOLCHAIN_USES_GLIBC
 
+comment "imx-gpu-viv needs EABIhf"
+	depends on BR2_arm
+	depends on !BR2_ARM_EABIHF
+
 config BR2_PACKAGE_IMX_GPU_VIV
 	bool "imx-gpu-viv"
 	select BR2_PACKAGE_HAS_LIBEGL
 	select BR2_PACKAGE_HAS_LIBGLES
 	select BR2_PACKAGE_HAS_LIBOPENVG
-	depends on BR2_arm # Only relevant for i.MX6
+	depends on BR2_ARM_EABIHF # Only relevant for EABIhf i.MX6
 	# Library binaries are linked against libc.so.6
 	depends on BR2_TOOLCHAIN_USES_GLIBC
 	help
diff --git a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash
index 4119388..f94d3148 100644
--- a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash
+++ b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash
@@ -1,3 +1 @@
-# locally computed
-sha256	3ea201f91ce9b56455e4983ab1055e8175415fbbf2800dc097d47e78ceefba34  imx-gpu-viv-5.0.11.p7.4-sfp.bin
-sha256	b80838104f2f2e3b0baf2f1aacdca263c1c92589ce919b3be40aaad23f686b7f  imx-gpu-viv-5.0.11.p7.4-hfp.bin
+sha256	8f79ce562d8ac1efb0a2af403b405541f98c55ae1631a18a3d7fad3224dfb44b  imx-gpu-viv-5.0.11.p8.4-hfp.bin
diff --git a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk
index b51a7af..2a15b55 100644
--- a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk
+++ b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk
@@ -4,19 +4,15 @@
 #
 ################################################################################
 
-IMX_GPU_VIV_BASE_VERSION = 5.0.11.p7.4
-ifeq ($(BR2_ARM_EABIHF),y)
+IMX_GPU_VIV_BASE_VERSION = 5.0.11.p8.4
 IMX_GPU_VIV_VERSION = $(IMX_GPU_VIV_BASE_VERSION)-hfp
-else
-IMX_GPU_VIV_VERSION = $(IMX_GPU_VIV_BASE_VERSION)-sfp
-endif
 IMX_GPU_VIV_SITE = $(FREESCALE_IMX_SITE)
 IMX_GPU_VIV_SOURCE = imx-gpu-viv-$(IMX_GPU_VIV_VERSION).bin
 
 IMX_GPU_VIV_INSTALL_STAGING = YES
 
-IMX_GPU_VIV_LICENSE = Freescale Semiconductor Software License Agreement
-IMX_GPU_VIV_LICENSE_FILES = EULA
+IMX_GPU_VIV_LICENSE = NXP Semiconductor Software License Agreement
+IMX_GPU_VIV_LICENSE_FILES = EULA COPYING
 IMX_GPU_VIV_REDISTRIBUTE = NO
 
 IMX_GPU_VIV_PROVIDES = libegl libgles libopenvg
-- 
1.9.1

[Buildroot] [PATCH v2 04/14] imx-gpu-viv: bump version to 5.0.11-p8.4

[Gary Bisson]

Andrew, All,

A couple of aesthetic remarks.

On Fri, Jun 10, 2016 at 8:09 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> Software floating point is no longer supported.
>
> For a detailed list of changes in this update, see the Graphics section of
> the i.MX Linux Release Notes contained in the i.MX Linux BSP documentation
> here:
>
> https://www.nxp.com/webapp/Download?colCode=L4.1.15_1.1.0_LINUX_DOCS&location=null&fpsp=1&WT_TYPE=Supporting%20Information&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=gz&WT_ASSET=Documentation&fileExt=.gz&Parent_nodeId=1337637154535695831062&Parent_pageType=product
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/b667ed4
> https://github.com/Freescale/meta-fsl-arm/commit/af5b3a6
>
> This package has been tested with both X11 and Framebuffer backends:
>  # cd /usr/share/examples/viv_samples/vdk/
>  # apitrace trace --api egl ./tutorial7
>  # gmem_info
>  ... display memory use per PID ...
>  # apitrace replay tutorial7.trace
>  # eglretrace tutorial7.trace
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>
> ---
> Changes v1 -> v2:
>   - added test procedure to comment
>   - updated from p8.3 to p8.4
>
>  package/freescale-imx/imx-gpu-viv/Config.in        |  6 +++++-
>  package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash |  4 +---
>  package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk   | 10 +++-------
>  3 files changed, 9 insertions(+), 11 deletions(-)
>
> diff --git a/package/freescale-imx/imx-gpu-viv/Config.in b/package/freescale-imx/imx-gpu-viv/Config.in
> index 20759b1..9a7cf56 100644
> --- a/package/freescale-imx/imx-gpu-viv/Config.in
> +++ b/package/freescale-imx/imx-gpu-viv/Config.in
> @@ -2,12 +2,16 @@ comment "imx-gpu-viv needs an (e)glibc toolchain"
>         depends on BR2_arm
>         depends on !BR2_TOOLCHAIN_USES_GLIBC
>
> +comment "imx-gpu-viv needs EABIhf"
> +       depends on BR2_arm
> +       depends on !BR2_ARM_EABIHF
> +
>  config BR2_PACKAGE_IMX_GPU_VIV
>         bool "imx-gpu-viv"
>         select BR2_PACKAGE_HAS_LIBEGL
>         select BR2_PACKAGE_HAS_LIBGLES
>         select BR2_PACKAGE_HAS_LIBOPENVG
> -       depends on BR2_arm # Only relevant for i.MX6
> +       depends on BR2_ARM_EABIHF # Only relevant for EABIhf i.MX6

I'm not fond of this comment since "EABIhf i.MX6" are two terms that
don't go together IMO. I'd either just keep the previous comment or
something like "Only relevant for i.MX6 + EABIhf toolchain".

Thomas, what do you think?

>         # Library binaries are linked against libc.so.6
>         depends on BR2_TOOLCHAIN_USES_GLIBC
>         help
> diff --git a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash
> index 4119388..f94d3148 100644
> --- a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash
> +++ b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash
> @@ -1,3 +1 @@
> -# locally computed
> -sha256 3ea201f91ce9b56455e4983ab1055e8175415fbbf2800dc097d47e78ceefba34  imx-gpu-viv-5.0.11.p7.4-sfp.bin
> -sha256 b80838104f2f2e3b0baf2f1aacdca263c1c92589ce919b3be40aaad23f686b7f  imx-gpu-viv-5.0.11.p7.4-hfp.bin
> +sha256 8f79ce562d8ac1efb0a2af403b405541f98c55ae1631a18a3d7fad3224dfb44b  imx-gpu-viv-5.0.11.p8.4-hfp.bin
> diff --git a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk
> index b51a7af..2a15b55 100644
> --- a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk
> +++ b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk
> @@ -4,19 +4,15 @@
>  #
>  ################################################################################
>
> -IMX_GPU_VIV_BASE_VERSION = 5.0.11.p7.4
> -ifeq ($(BR2_ARM_EABIHF),y)
> +IMX_GPU_VIV_BASE_VERSION = 5.0.11.p8.4
>  IMX_GPU_VIV_VERSION = $(IMX_GPU_VIV_BASE_VERSION)-hfp
> -else
> -IMX_GPU_VIV_VERSION = $(IMX_GPU_VIV_BASE_VERSION)-sfp
> -endif
>  IMX_GPU_VIV_SITE = $(FREESCALE_IMX_SITE)
>  IMX_GPU_VIV_SOURCE = imx-gpu-viv-$(IMX_GPU_VIV_VERSION).bin

I think it is ok to keep the version naming like you did but m

[Buildroot] [PATCH v2 04/14] imx-gpu-viv: bump version to 5.0.11-p8.4

[Gary Bisson]

Andrew, All,

On Mon, Jun 13, 2016 at 3:00 PM, Gary Bisson
<gary.bisson@boundarydevices.com> wrote:
> Andrew, All,
>
> A couple of aesthetic remarks.
>
> On Fri, Jun 10, 2016 at 8:09 PM, Andrew Webster <awebster@arcx.com> wrote:
>> Changelog:
>> Software floating point is no longer supported.
>>
>> For a detailed list of changes in this update, see the Graphics section of
>> the i.MX Linux Release Notes contained in the i.MX Linux BSP documentation
>> here:
>>
>> https://www.nxp.com/webapp/Download?colCode=L4.1.15_1.1.0_LINUX_DOCS&location=null&fpsp=1&WT_TYPE=Supporting%20Information&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=gz&WT_ASSET=Documentation&fileExt=.gz&Parent_nodeId=1337637154535695831062&Parent_pageType=product
>>
>> This patch is based on the Yocto equivalent:
>> https://github.com/Freescale/meta-fsl-arm/commit/b667ed4
>> https://github.com/Freescale/meta-fsl-arm/commit/af5b3a6
>>
>> This package has been tested with both X11 and Framebuffer backends:
>>  # cd /usr/share/examples/viv_samples/vdk/
>>  # apitrace trace --api egl ./tutorial7
>>  # gmem_info
>>  ... display memory use per PID ...
>>  # apitrace replay tutorial7.trace
>>  # eglretrace tutorial7.trace
>>
>> Signed-off-by: Andrew Webster <awebster@arcx.com>
>> ---
>> Changes v1 -> v2:
>>   - added test procedure to comment
>>   - updated from p8.3 to p8.4
>>
>>  package/freescale-imx/imx-gpu-viv/Config.in        |  6 +++++-
>>  package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash |  4 +---
>>  package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk   | 10 +++-------
>>  3 files changed, 9 insertions(+), 11 deletions(-)
>>
>> diff --git a/package/freescale-imx/imx-gpu-viv/Config.in b/package/freescale-imx/imx-gpu-viv/Config.in
>> index 20759b1..9a7cf56 100644
>> --- a/package/freescale-imx/imx-gpu-viv/Config.in
>> +++ b/package/freescale-imx/imx-gpu-viv/Config.in
>> @@ -2,12 +2,16 @@ comment "imx-gpu-viv needs an (e)glibc toolchain"
>>         depends on BR2_arm
>>         depends on !BR2_TOOLCHAIN_USES_GLIBC
>>
>> +comment "imx-gpu-viv needs EABIhf"
>> +       depends on BR2_arm
>> +       depends on !BR2_ARM_EABIHF
>> +
>>  config BR2_PACKAGE_IMX_GPU_VIV
>>         bool "imx-gpu-viv"
>>         select BR2_PACKAGE_HAS_LIBEGL
>>         select BR2_PACKAGE_HAS_LIBGLES
>>         select BR2_PACKAGE_HAS_LIBOPENVG
>> -       depends on BR2_arm # Only relevant for i.MX6
>> +       depends on BR2_ARM_EABIHF # Only relevant for EABIhf i.MX6
>
> I'm not fond of this comment since "EABIhf i.MX6" are two terms that
> don't go together IMO. I'd either just keep the previous comment or
> something like "Only relevant for i.MX6 + EABIhf toolchain".
>
> Thomas, what do you think?
>
>>         # Library binaries are linked against libc.so.6
>>         depends on BR2_TOOLCHAIN_USES_GLIBC
>>         help
>> diff --git a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash
>> index 4119388..f94d3148 100644
>> --- a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash
>> +++ b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.hash
>> @@ -1,3 +1 @@
>> -# locally computed
>> -sha256 3ea201f91ce9b56455e4983ab1055e8175415fbbf2800dc097d47e78ceefba34  imx-gpu-viv-5.0.11.p7.4-sfp.bin
>> -sha256 b80838104f2f2e3b0baf2f1aacdca263c1c92589ce919b3be40aaad23f686b7f  imx-gpu-viv-5.0.11.p7.4-hfp.bin
>> +sha256 8f79ce562d8ac1efb0a2af403b405541f98c55ae1631a18a3d7fad3224dfb44b  imx-gpu-viv-5.0.11.p8.4-hfp.bin
>> diff --git a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk
>> index b51a7af..2a15b55 100644
>> --- a/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk
>> +++ b/package/freescale-imx/imx-gpu-viv/imx-gpu-viv.mk
>> @@ -4,19 +4,15 @@
>>  #
>>  ################################################################################
>>
>> -IMX_GPU_VIV_BASE_VERSION = 5.0.11.p7.4
>> -ifeq ($(BR2_ARM_EABIHF),y)
>> +IMX_GPU_VIV_BASE_VERSION = 5.0.11.p8.4
>>  IMX_GPU_VIV_VERSION = $(IMX_GPU_VIV_BASE_VERSION)-hfp
>> -else
>> -IMX_GPU_VIV_VERSION = $(IMX_GPU_VIV_BASE_VERSION)-sfp
>> -endif
>>  IMX_GPU_VIV_SITE = $(FREESCALE_IMX_SITE)
>>  IMX_GPU_VIV_SOURCE = imx-gpu-viv-$(IMX_GPU_VIV_VERSION).bin
>
> I think it is ok to keep the version naming like you did but m

Sorry, pressed send too early. I wanted to say that maybe some may
prefer if we get rid of IMX_GPU_VIV_BASE_VERSION and have
IMX_GPU_VIV_VERSION directly set to 5.0.11.p8.4-hfp.

Anyway, tested it and it works fine:
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>

Also, if Thomas agrees to keep the naming like this and doesn't care
about the comment above:
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>

Regards,
Gary

[Buildroot] [PATCH v2 04/14] imx-gpu-viv: bump version to 5.0.11-p8.4

[Thomas Petazzoni]

Hello,

On Mon, 13 Jun 2016 15:00:07 +0200, Gary Bisson wrote:

> > diff --git a/package/freescale-imx/imx-gpu-viv/Config.in b/package/freescale-imx/imx-gpu-viv/Config.in
> > index 20759b1..9a7cf56 100644
> > --- a/package/freescale-imx/imx-gpu-viv/Config.in
> > +++ b/package/freescale-imx/imx-gpu-viv/Config.in
> > @@ -2,12 +2,16 @@ comment "imx-gpu-viv needs an (e)glibc toolchain"
> >         depends on BR2_arm
> >         depends on !BR2_TOOLCHAIN_USES_GLIBC
> >
> > +comment "imx-gpu-viv needs EABIhf"
> > +       depends on BR2_arm
> > +       depends on !BR2_ARM_EABIHF

The mali-t76x had a similar situation, but uses a single comment for
the glibc and ARM EABIhf dependency, so I've changed it to do the same:

comment "mali-t76x needs an (e)glibc toolchain with armhf enabled"
        depends on BR2_arm
        depends on !BR2_TOOLCHAIN_USES_GLIBC || !BR2_ARM_EABIHF

> >  config BR2_PACKAGE_IMX_GPU_VIV
> >         bool "imx-gpu-viv"
> >         select BR2_PACKAGE_HAS_LIBEGL
> >         select BR2_PACKAGE_HAS_LIBGLES
> >         select BR2_PACKAGE_HAS_LIBOPENVG
> > -       depends on BR2_arm # Only relevant for i.MX6
> > +       depends on BR2_ARM_EABIHF # Only relevant for EABIhf i.MX6  
> 
> I'm not fond of this comment since "EABIhf i.MX6" are two terms that
> don't go together IMO. I'd either just keep the previous comment or
> something like "Only relevant for i.MX6 + EABIhf toolchain".
> 
> Thomas, what do you think?

Correct, I've changed this to:

        # Pre-built binaries only available for ARM EABIhf
        depends on BR2_ARM_EABIHF

> > -IMX_GPU_VIV_BASE_VERSION = 5.0.11.p7.4
> > -ifeq ($(BR2_ARM_EABIHF),y)
> > +IMX_GPU_VIV_BASE_VERSION = 5.0.11.p8.4
> >  IMX_GPU_VIV_VERSION = $(IMX_GPU_VIV_BASE_VERSION)-hfp
> > -else
> > -IMX_GPU_VIV_VERSION = $(IMX_GPU_VIV_BASE_VERSION)-sfp
> > -endif
> >  IMX_GPU_VIV_SITE = $(FREESCALE_IMX_SITE)
> >  IMX_GPU_VIV_SOURCE = imx-gpu-viv-$(IMX_GPU_VIV_VERSION).bin  
> 
> I think it is ok to keep the version naming like you did but m

I've removed IMX_GPU_VIV_BASE_VERSION entirely, and use directly
IMX_GPU_VIV_VERSION.

Thanks!

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH v2 05/14] xdriver_xf86-video-imx-viv: bump version to 5.0.11-p8.4

[Andrew Webster]

Remove upstreamed patch.
Add patch from Yocto to not use git for versioning.

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/06a0574
https://github.com/Freescale/meta-fsl-arm/commit/076df90

The following xorg.conf was used in order to force the use of the
vivante module:
https://github.com/Freescale/meta-fsl-arm/blob/master/recipes-graphics/xorg-xserver/xserver-xf86-config/mx6/xorg.conf

Note that the X server must be started with the "noreset" option to
avoid crashes when closing X apps.
Tested with:
 # X -noreset &
 # cd /usr/share/examples/viv_samples/vdk/
 # DISPLAY=:0 ./tutorial7

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
Changes v1 -> v2:
  - added test procedure to comment
  - updated from p8.3 to p8.4

 .../0001-Remove-dix-internal-header-usage.patch    | 31 --------
 ...001-Stop-using-Git-to-write-local-version.patch | 87 ++++++++++++++++++++++
 .../xdriver_xf86-video-imx-viv.hash                |  3 +-
 .../xdriver_xf86-video-imx-viv.mk                  |  2 +-
 4 files changed, 89 insertions(+), 34 deletions(-)
 delete mode 100644 package/x11r7/xdriver_xf86-video-imx-viv/0001-Remove-dix-internal-header-usage.patch
 create mode 100644 package/x11r7/xdriver_xf86-video-imx-viv/0001-Stop-using-Git-to-write-local-version.patch

diff --git a/package/x11r7/xdriver_xf86-video-imx-viv/0001-Remove-dix-internal-header-usage.patch b/package/x11r7/xdriver_xf86-video-imx-viv/0001-Remove-dix-internal-header-usage.patch
deleted file mode 100644
index f146ba3..0000000
--- a/package/x11r7/xdriver_xf86-video-imx-viv/0001-Remove-dix-internal-header-usage.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 80c419dddf6483873503d90694c4b4ae34ffa5e4 Mon Sep 17 00:00:00 2001
-From: Otavio Salvador <otavio@ossystems.com.br>
-Date: Wed, 2 Dec 2015 13:50:57 +0000
-Subject: [PATCH] Remove 'dix' internal header usage
-Organization: O.S. Systems Software LTDA.
-
-The 'swaprep.h' is an internal Xorg header and is not being installed
-anymore. The swap features are provided by the 'misc.h' header now.
-
-Upstream-Status: Pending
-
-Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
----
- EXA/src/vivante_extension/vivante_ext.c | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/EXA/src/vivante_extension/vivante_ext.c b/EXA/src/vivante_extension/vivante_ext.c
-index 0d1085b..1ffbb1b 100644
---- a/EXA/src/vivante_extension/vivante_ext.c
-+++ b/EXA/src/vivante_extension/vivante_ext.c
-@@ -40,7 +40,6 @@
- #include "cursorstr.h"
- #include "scrnintstr.h"
- #include "servermd.h"
--#include "swaprep.h"
- #include "drm.h"
- #include "xf86Module.h"
- #include "globals.h"
--- 
-2.1.4
-
diff --git a/package/x11r7/xdriver_xf86-video-imx-viv/0001-Stop-using-Git-to-write-local-version.patch b/package/x11r7/xdriver_xf86-video-imx-viv/0001-Stop-using-Git-to-write-local-version.patch
new file mode 100644
index 0000000..f541e5c
--- /dev/null
+++ b/package/x11r7/xdriver_xf86-video-imx-viv/0001-Stop-using-Git-to-write-local-version.patch
@@ -0,0 +1,87 @@
+From 69a92f4576a1e789ba2fcf957164d2c4013020c5 Mon Sep 17 00:00:00 2001
+From: Otavio Salvador <otavio@ossystems.com.br>
+Date: Wed, 2 Dec 2015 13:36:25 +0000
+Subject: [PATCH] Stop using Git to write local version
+Organization: O.S. Systems Software LTDA.
+
+The standard version does not use a Git repository so we should not
+use Git to identify the commit of the build as it can end getting the
+version from a wrong repository and can be misleading.
+
+Upstream-Status: Pending
+
+Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
+---
+ EXA/src/makefile.tc         | 6 +++---
+ FslExt/src/makefile.tc      | 6 +++---
+ util/autohdmi/makefile.tc   | 6 +++---
+ util/pandisplay/makefile.tc | 6 +++---
+ 4 files changed, 12 insertions(+), 12 deletions(-)
+
+diff --git a/EXA/src/makefile.tc b/EXA/src/makefile.tc
+index 0b9a9e6..ec6e68d 100644
+--- a/EXA/src/makefile.tc
++++ b/EXA/src/makefile.tc
+@@ -52,8 +52,8 @@ prefix ?= /usr
+ sysroot ?= /
+ 
+ # get git commit number
+-COMMITNR := `git log -n 1 --format=%H`
+-DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
+-LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
++#COMMITNR := `git log -n 1 --format=%H`
++#DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
++#LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
+ 
+ 
+diff --git a/FslExt/src/makefile.tc b/FslExt/src/makefile.tc
+index 0b9a9e6..ec6e68d 100644
+--- a/FslExt/src/makefile.tc
++++ b/FslExt/src/makefile.tc
+@@ -52,8 +52,8 @@ prefix ?= /usr
+ sysroot ?= /
+ 
+ # get git commit number
+-COMMITNR := `git log -n 1 --format=%H`
+-DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
+-LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
++#COMMITNR := `git log -n 1 --format=%H`
++#DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
++#LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
+ 
+ 
+diff --git a/util/autohdmi/makefile.tc b/util/autohdmi/makefile.tc
+index c9de0a6..d0a468c 100644
+--- a/util/autohdmi/makefile.tc
++++ b/util/autohdmi/makefile.tc
+@@ -64,8 +64,8 @@ prefix ?= /usr
+ sysroot ?= /
+ 
+ # get git commit number
+-COMMITNR := `git log -n 1 --format=%H`
+-DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
+-LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
++#COMMITNR := `git log -n 1 --format=%H`
++#DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
++#LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
+ 
+ 
+diff --git a/util/pandisplay/makefile.tc b/util/pandisplay/makefile.tc
+index 28732b9..bf54c20 100644
+--- a/util/pandisplay/makefile.tc
++++ b/util/pandisplay/makefile.tc
+@@ -64,8 +64,8 @@ prefix ?= /usr
+ sysroot ?= /
+ 
+ # get git commit number
+-COMMITNR := `git log -n 1 --format=%H`
+-DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
+-LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
++#COMMITNR := `git log -n 1 --format=%H`
++#DIRTY := `git diff-index --quiet HEAD || echo '-dirty'`
++#LOCAL_CFLAGS += -DCOMMIT="${COMMITNR}${DIRTY}"
+ 
+ 
+-- 
+2.1.4
+
diff --git a/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.hash b/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.hash
index 9a16569..2cdf2d0 100644
--- a/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.hash
+++ b/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.hash
@@ -1,2 +1 @@
-# locally computed
-sha256	3effaf42bde64da8fad2dfe0dcef12d1cfbbbe189511dbd4612442129fd832cc  xserver-xorg-video-imx-viv-5.0.11.p7.4.tar.gz
+sha256	ddb6de9e00ce0b22f6c905eaf6694424413eade53ef6cd3b36e20ac99dcc0e0f  xserver-xorg-video-imx-viv-5.0.11.p8.4.tar.gz
diff --git a/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.mk b/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.mk
index a1b32b1..9ce08ef 100644
--- a/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.mk
+++ b/package/x11r7/xdriver_xf86-video-imx-viv/xdriver_xf86-video-imx-viv.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-XDRIVER_XF86_VIDEO_IMX_VIV_VERSION = 5.0.11.p7.4
+XDRIVER_XF86_VIDEO_IMX_VIV_VERSION = 5.0.11.p8.4
 XDRIVER_XF86_VIDEO_IMX_VIV_SITE = $(FREESCALE_IMX_SITE)
 XDRIVER_XF86_VIDEO_IMX_VIV_SOURCE = xserver-xorg-video-imx-viv-$(XDRIVER_XF86_VIDEO_IMX_VIV_VERSION).tar.gz
 XDRIVER_XF86_VIDEO_IMX_VIV_DEPENDENCIES = imx-gpu-viv xserver_xorg-server \
-- 
1.9.1

[Buildroot] [PATCH v2 05/14] xdriver_xf86-video-imx-viv: bump version to 5.0.11-p8.4

[Gary Bisson]

Andrew, All,

On Fri, Jun 10, 2016 at 8:11 PM, Andrew Webster <awebster@arcx.com> wrote:
> Remove upstreamed patch.
> Add patch from Yocto to not use git for versioning.
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/06a0574
> https://github.com/Freescale/meta-fsl-arm/commit/076df90
>
> The following xorg.conf was used in order to force the use of the
> vivante module:
> https://github.com/Freescale/meta-fsl-arm/blob/master/recipes-graphics/xorg-xserver/xserver-xf86-config/mx6/xorg.conf
>
> Note that the X server must be started with the "noreset" option to
> avoid crashes when closing X apps.
> Tested with:
>  # X -noreset &
>  # cd /usr/share/examples/viv_samples/vdk/
>  # DISPLAY=:0 ./tutorial7
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>
> ---
> Changes v1 -> v2:
>   - added test procedure to comment
>   - updated from p8.3 to p8.4
>
>  .../0001-Remove-dix-internal-header-usage.patch    | 31 --------
>  ...001-Stop-using-Git-to-write-local-version.patch | 87 ++++++++++++++++++++++
>  .../xdriver_xf86-video-imx-viv.hash                |  3 +-
>  .../xdriver_xf86-video-imx-viv.mk                  |  2 +-
>  4 files changed, 89 insertions(+), 34 deletions(-)
>  delete mode 100644 package/x11r7/xdriver_xf86-video-imx-viv/0001-Remove-dix-internal-header-usage.patch
>  create mode 100644 package/x11r7/xdriver_xf86-video-imx-viv/0001-Stop-using-Git-to-write-local-version.patch
>
> diff --git a/package/x11r7/xdriver_xf86-video-imx-viv/0001-Remove-dix-internal-header-usage.patch b/package/x11r7/xdriver_xf86-video-imx-viv/0001-Remove-dix-internal-header-usage.patch
> deleted file mode 100644
> index f146ba3..0000000
> --- a/package/x11r7/xdriver_xf86-video-imx-viv/0001-Remove-dix-internal-header-usage.patch
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -From 80c419dddf6483873503d90694c4b4ae34ffa5e4 Mon Sep 17 00:00:00 2001
> -From: Otavio Salvador <otavio@ossystems.com.br>
> -Date: Wed, 2 Dec 2015 13:50:57 +0000
> -Subject: [PATCH] Remove 'dix' internal header usage
> -Organization: O.S. Systems Software LTDA.
> -
> -The 'swaprep.h' is an internal Xorg header and is not being installed
> -anymore. The swap features are provided by the 'misc.h' header now.
> -
> -Upstream-Status: Pending
> -
> -Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

I think you need to add your SOB in the patch like:

sob: Otavio

Downloaded from:
<url from yocto>

sob: Andrew

---

Also, should we add a dependency on ARM_EABIHF since it depends on
imx-gpu-viv? I'm never a 100% sure when you need to propagate those
dependencies.

Regards,
Gary

[Buildroot] [PATCH v2 05/14] xdriver_xf86-video-imx-viv: bump version to 5.0.11-p8.4

[Thomas Petazzoni]

Hello,

On Mon, 13 Jun 2016 15:20:11 +0200, Gary Bisson wrote:

> > @@ -1,31 +0,0 @@
> > -From 80c419dddf6483873503d90694c4b4ae34ffa5e4 Mon Sep 17 00:00:00 2001
> > -From: Otavio Salvador <otavio@ossystems.com.br>
> > -Date: Wed, 2 Dec 2015 13:50:57 +0000
> > -Subject: [PATCH] Remove 'dix' internal header usage
> > -Organization: O.S. Systems Software LTDA.
> > -
> > -The 'swaprep.h' is an internal Xorg header and is not being installed
> > -anymore. The swap features are provided by the 'misc.h' header now.
> > -
> > -Upstream-Status: Pending
> > -
> > -Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>  
> 
> I think you need to add your SOB in the patch like:

You're commenting on the patch that is *removed* so it's not really
where a change should be done. However, I've added the reference to the
upstream commit in the patch added by Andrew, indeed.

> Also, should we add a dependency on ARM_EABIHF since it depends on
> imx-gpu-viv? I'm never a 100% sure when you need to propagate those
> dependencies.

You need to propagate the dependencies when you're doing a select, i.e:

config BR2_PACKAGE_FOO
	depends on BR2_ARM_EABIHF

config BR2_PACKAGE_BAR
	select BR2_PACKAGE_FOO

is wrong, because BR2_PACKAGE_BAR should replicate the "depends on
BR2_ARM_EABIHF".

However, in the case here, xdriver_xf86-video-imx-viv does:

	depends on BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_X11

so we're good (i.e it doesn't "select" the imx-gpu-viv package).

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH v2 06/14] firmware-imx: bump to version 5.4

[Andrew Webster]

Changelog:
- Upgrade to FW v3.1.1_r46072
- v3.1.1_r46070 plus 2 patches 391/392
- FSLARIK-391 [Decoder/H.264] VPU is always busy when decoding an
erroneous H264 bitstream
- FSLARIK-392 [Decoder/VC1] VPU outputs only 1 picture
- Change to the format of Linux coda driver firmware

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/dbb8773

Implicitly tested through gstreamer as the plugin relies on it:
 # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
   matroskademux ! imxvpudec ! imxipuvideosink

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
Changes v1 -> v2:
  - added test procedure to comment

 package/freescale-imx/firmware-imx/firmware-imx.hash | 2 +-
 package/freescale-imx/firmware-imx/firmware-imx.mk   | 5 ++---
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/package/freescale-imx/firmware-imx/firmware-imx.hash b/package/freescale-imx/firmware-imx/firmware-imx.hash
index a5bc82c..a6e5bd5 100644
--- a/package/freescale-imx/firmware-imx/firmware-imx.hash
+++ b/package/freescale-imx/firmware-imx/firmware-imx.hash
@@ -1 +1 @@
-sha256 fd14c3666eb3c12f4f2665d95caf383bb1d0277bb12e2de28fefc8d1230604f2  firmware-imx-5.3.bin
+sha256 c5bd4bff48cce9715a5d6d2c190ff3cd2262c7196f7facb9b0eda231c92cc223  firmware-imx-5.4.bin
diff --git a/package/freescale-imx/firmware-imx/firmware-imx.mk b/package/freescale-imx/firmware-imx/firmware-imx.mk
index 8f81c57..1893929 100644
--- a/package/freescale-imx/firmware-imx/firmware-imx.mk
+++ b/package/freescale-imx/firmware-imx/firmware-imx.mk
@@ -4,12 +4,11 @@
 #
 ################################################################################
 
-FIRMWARE_IMX_VERSION = 5.3
+FIRMWARE_IMX_VERSION = 5.4
 FIRMWARE_IMX_SITE = $(FREESCALE_IMX_SITE)
 FIRMWARE_IMX_SOURCE = firmware-imx-$(FIRMWARE_IMX_VERSION).bin
 
-FIRMWARE_IMX_LICENSE = Freescale Semiconductor Software License Agreement, \
-	Atheros license (ath6k)
+FIRMWARE_IMX_LICENSE = NXP Semiconductor Software License Agreement
 FIRMWARE_IMX_LICENSE_FILES = EULA COPYING
 FIRMWARE_IMX_REDISTRIBUTE = NO
 
-- 
1.9.1

[Buildroot] [PATCH v2 06/14] firmware-imx: bump to version 5.4

[Gary Bisson]

Andrew, All,

On Fri, Jun 10, 2016 at 8:11 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> - Upgrade to FW v3.1.1_r46072
> - v3.1.1_r46070 plus 2 patches 391/392
> - FSLARIK-391 [Decoder/H.264] VPU is always busy when decoding an
> erroneous H264 bitstream
> - FSLARIK-392 [Decoder/VC1] VPU outputs only 1 picture
> - Change to the format of Linux coda driver firmware
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/dbb8773
>
> Implicitly tested through gstreamer as the plugin relies on it:
>  # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
>    matroskademux ! imxvpudec ! imxipuvideosink
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>

Note that I've tested the VPU firmware on a 3.14.52 kernel just fine.
The reason is that this firmware is actually loaded by the user space
imx-vpu component, so as long as firmware-imx and imx-vpu are aligned,
the endianness of the fw file doesn't matter.

Regards,
Gary

[Buildroot] [PATCH v2 07/14] gst1-imx: bump to version 0.12.1

[Andrew Webster]

Changelog:
* compositor: Rename ImxCompositor(Pad) to ImxVideoCompositor(Pad)
  This prevents conflicts if both the NXP plugins and the gstreamer-imx
  are installed in the same rootfs

* Add switches to wscript configuration to enable/disable plugins
  Until now, all plugins were built (unless their dependencies were
  missing). On some i.MX machines, some features are missing. For
  example, the i.MX7 has no VPU. To ensure deterministic builds, it is
  useful to selectively disable plugins in the build.

* ipu+pxp: : Fix deadlocks and incorrect logging in case of init error
  This was causing a freeze if for example one tries to use PxP elements
  on an i.MX6 Dual/Quad

* imxv4l2videosrc fixes and enhancements:
  * fixes to interlacing support (incl. workarounds for analog TV input)
  * remove format restriction in get_caps function
    this removes the limitation on I420 formats
  * simplified determination of fps (necessary due to driver limitations)

* eglvivsink: wayland: Do not commit before buffers are swapped
  This fixes eglSwapBuffer swaps with damaged frames

* Documentation additions
  Adds GPU memory leak notess to the FAQ

* vpu: encoder: Expose motion estimation range as property

* vpu: decoder: Drop output frame if its buffer cannot be allocated

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/cec4c47

Tested with the following commands on i.MX6Q (IPU):
 # gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
 # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
   matroskademux ! imxvpudec ! imxipuvideosink
 # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
   matroskademux ! imxvpudec ! imxeglvivsink

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
Changes v1 -> v2:
  - added test procedure to comment

 package/gstreamer1/gst1-imx/gst1-imx.hash | 2 +-
 package/gstreamer1/gst1-imx/gst1-imx.mk   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/package/gstreamer1/gst1-imx/gst1-imx.hash b/package/gstreamer1/gst1-imx/gst1-imx.hash
index 03e1729..ca47776 100644
--- a/package/gstreamer1/gst1-imx/gst1-imx.hash
+++ b/package/gstreamer1/gst1-imx/gst1-imx.hash
@@ -1,2 +1,2 @@
 # locally computed hash
-sha256 df34f080e24ac8f1619780aa5ad4e6ab1333f822cd2bf5fcb380b28c97248810  gst1-imx-0.12.0.tar.gz
+sha256 d8a7357bc575e22d0d19d6d7cf547bd69cad5fc47adb93f09ead41b0124353fa  gst1-imx-0.12.1.tar.gz
diff --git a/package/gstreamer1/gst1-imx/gst1-imx.mk b/package/gstreamer1/gst1-imx/gst1-imx.mk
index 650e097..8838110 100644
--- a/package/gstreamer1/gst1-imx/gst1-imx.mk
+++ b/package/gstreamer1/gst1-imx/gst1-imx.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-GST1_IMX_VERSION = 0.12.0
+GST1_IMX_VERSION = 0.12.1
 GST1_IMX_SITE = $(call github,Freescale,gstreamer-imx,$(GST1_IMX_VERSION))
 
 GST1_IMX_LICENSE = LGPLv2+
-- 
1.9.1

[Buildroot] [PATCH v2 07/14] gst1-imx: bump to version 0.12.1

[Gary Bisson]

Andrew, All,

On Fri, Jun 10, 2016 at 8:12 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> * compositor: Rename ImxCompositor(Pad) to ImxVideoCompositor(Pad)
>   This prevents conflicts if both the NXP plugins and the gstreamer-imx
>   are installed in the same rootfs
>
> * Add switches to wscript configuration to enable/disable plugins
>   Until now, all plugins were built (unless their dependencies were
>   missing). On some i.MX machines, some features are missing. For
>   example, the i.MX7 has no VPU. To ensure deterministic builds, it is
>   useful to selectively disable plugins in the build.
>
> * ipu+pxp: : Fix deadlocks and incorrect logging in case of init error
>   This was causing a freeze if for example one tries to use PxP elements
>   on an i.MX6 Dual/Quad
>
> * imxv4l2videosrc fixes and enhancements:
>   * fixes to interlacing support (incl. workarounds for analog TV input)
>   * remove format restriction in get_caps function
>     this removes the limitation on I420 formats
>   * simplified determination of fps (necessary due to driver limitations)
>
> * eglvivsink: wayland: Do not commit before buffers are swapped
>   This fixes eglSwapBuffer swaps with damaged frames
>
> * Documentation additions
>   Adds GPU memory leak notess to the FAQ
>
> * vpu: encoder: Expose motion estimation range as property
>
> * vpu: decoder: Drop output frame if its buffer cannot be allocated
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/cec4c47
>
> Tested with the following commands on i.MX6Q (IPU):
>  # gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
>  # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
>    matroskademux ! imxvpudec ! imxipuvideosink
>  # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
>    matroskademux ! imxvpudec ! imxeglvivsink
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>

Once merged, I'll make a follow-up patch that allows to disable
components you don't want.

Regards,
Gary

[Buildroot] [PATCH v2 08/14] imx-vpu: bump to version 5.4.33

[Andrew Webster]

Changelog:
VPU firmware has been changed to the format of Linux codec driver firmware.
Change VPU library to adapt to firmware format change.

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/f5e1056

Implicitly tested through gstreamer as the plugins rely on it:
 # gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
 # gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
 # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
   matroskademux ! imxvpudec ! imxipuvideosink

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
Changes v1 -> v2:
  - added test procedure to comment

 package/freescale-imx/imx-vpu/imx-vpu.hash | 2 +-
 package/freescale-imx/imx-vpu/imx-vpu.mk   | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/package/freescale-imx/imx-vpu/imx-vpu.hash b/package/freescale-imx/imx-vpu/imx-vpu.hash
index c828c2b..67ebaf2 100644
--- a/package/freescale-imx/imx-vpu/imx-vpu.hash
+++ b/package/freescale-imx/imx-vpu/imx-vpu.hash
@@ -1,2 +1,2 @@
 # Locally computed
-sha256	f11b91dcdb84bfefd3c88f10a9c1c1bc3420e4bbaadc38b9280fb52f7769eca8  imx-vpu-5.4.32.bin
+sha256	2e670ef2337a5dbe6c32fa07128ad9aad32afdbf472c23d44133245ec6a66d46  imx-vpu-5.4.33.bin
diff --git a/package/freescale-imx/imx-vpu/imx-vpu.mk b/package/freescale-imx/imx-vpu/imx-vpu.mk
index 949fefa..09ff5a8 100644
--- a/package/freescale-imx/imx-vpu/imx-vpu.mk
+++ b/package/freescale-imx/imx-vpu/imx-vpu.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-IMX_VPU_VERSION = 5.4.32
+IMX_VPU_VERSION = 5.4.33
 IMX_VPU_SITE = $(FREESCALE_IMX_SITE)
 IMX_VPU_SOURCE = imx-vpu-$(IMX_VPU_VERSION).bin
 
@@ -16,7 +16,7 @@ IMX_VPU_MAKE_ENV = \
 	CROSS_COMPILE="$(TARGET_CROSS)" \
 	PLATFORM=$(BR2_PACKAGE_FREESCALE_IMX_PLATFORM)
 
-IMX_VPU_LICENSE = Freescale Semiconductor Software License Agreement
+IMX_VPU_LICENSE = NXP Semiconductor Software License Agreement
 IMX_VPU_LICENSE_FILES = EULA COPYING
 IMX_VPU_REDISTRIBUTE = NO
 
-- 
1.9.1

[Buildroot] [PATCH v2 08/14] imx-vpu: bump to version 5.4.33

[Gary Bisson]

Andrew, All,

On Fri, Jun 10, 2016 at 8:12 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> VPU firmware has been changed to the format of Linux codec driver firmware.
> Change VPU library to adapt to firmware format change.
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/f5e1056
>
> Implicitly tested through gstreamer as the plugins rely on it:
>  # gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
>  # gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
>  # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
>    matroskademux ! imxvpudec ! imxipuvideosink
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>

Also confirm that gstreamer0.10 plugins are still working fine.

Regards,
Gary

[Buildroot] [PATCH v2 09/14] imx-codec: rename from libfslcodec and bump version to 4.0.9

[Andrew Webster]

Changelog:
--[aac_dec] refine the code for pure c build
  aac decoder c build need float point support, which use some
  float point function.

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/4b91194

Implicitly tested through gstreamer as the 0.10 plugin relies on it:
 # gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
Changes v1 -> v2:
  - added test procedure to comment
  - moved legacy config under 2016.08 section
  - renamed Freescale to NXP in Config.in

 Config.in.legacy                                   |  7 +++++++
 package/Config.in                                  |  1 -
 package/freescale-imx/Config.in                    |  1 +
 .../imx-codec}/Config.in                           |  6 +++---
 package/freescale-imx/imx-codec/imx-codec.hash     |  2 ++
 package/freescale-imx/imx-codec/imx-codec.mk       | 23 ++++++++++++++++++++++
 package/gstreamer/gst-fsl-plugins/Config.in        |  4 ++--
 .../gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk   |  2 +-
 package/gstreamer1/gst1-imx/Config.in              |  2 +-
 package/gstreamer1/gst1-imx/gst1-imx.mk            |  4 ++--
 package/libfslcodec/libfslcodec.hash               |  2 --
 package/libfslcodec/libfslcodec.mk                 | 23 ----------------------
 12 files changed, 42 insertions(+), 35 deletions(-)
 rename package/{libfslcodec => freescale-imx/imx-codec}/Config.in (75%)
 create mode 100644 package/freescale-imx/imx-codec/imx-codec.hash
 create mode 100644 package/freescale-imx/imx-codec/imx-codec.mk
 delete mode 100644 package/libfslcodec/libfslcodec.hash
 delete mode 100644 package/libfslcodec/libfslcodec.mk

diff --git a/Config.in.legacy b/Config.in.legacy
index 434aa5f..e5a568d 100644
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -145,6 +145,13 @@ endif
 ###############################################################################
 comment "Legacy options removed in 2016.08"
 
+config BR2_PACKAGE_LIBFSLCODEC
+	bool "libfslcodec has been renamed to imx-codec"
+	select BR2_LEGACY
+	select BR2_PACKAGE_IMX_CODEC
+	help
+	  The libfslcodec has been renamed to match the renamed package.
+
 config BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE_FIT_SIGNATURE_SUPPORT
 	bool "FIT support in uboot-tools has been refactored"
 	select BR2_LEGACY
diff --git a/package/Config.in b/package/Config.in
index 38c8527..1cdbaa0 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -1098,7 +1098,6 @@ menu "Multimedia"
 	source "package/libdvdnav/Config.in"
 	source "package/libdvdread/Config.in"
 	source "package/libebml/Config.in"
-	source "package/libfslcodec/Config.in"
 	source "package/libfslparser/Config.in"
 	source "package/libfslvpuwrap/Config.in"
 	source "package/libhdhomerun/Config.in"
diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in
index 8c03190..052de5a 100644
--- a/package/freescale-imx/Config.in
+++ b/package/freescale-imx/Config.in
@@ -49,6 +49,7 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
 		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX53 || \
 		BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q
 
+source "package/freescale-imx/imx-codec/Config.in"
 source "package/freescale-imx/imx-kobs/Config.in"
 source "package/freescale-imx/imx-lib/Config.in"
 source "package/freescale-imx/imx-uuc/Config.in"
diff --git a/package/freescale-imx/imx-codec/Config.in b/package/freescale-imx/imx-codec/Config.in
new file mode 100644
index 0000000..70d340a
--- /dev/null
+++ b/package/freescale-imx/imx-codec/Config.in
@@ -0,0 +1,13 @@
+config BR2_PACKAGE_IMX_CODEC
+	bool "imx-codec"
+	depends on BR2_arm # Only relevant for i.MX
+	depends on BR2_TOOLCHAIN_USES_GLIBC # prebuilt binaries
+	help
+	  Binary codec libraries for the NXP i.MX SoCs.
+
+	  This library is provided by NXP as-is and doesn't have
+	  an upstream.
+
+comment "imx-codec needs an (e)glibc toolchain"
+	depends on BR2_arm
+	depends on !BR2_TOOLCHAIN_USES_GLIBC
diff --git a/package/freescale-imx/imx-codec/imx-codec.hash b/package/freescale-imx/imx-codec/imx-codec.hash
new file mode 100644
index 0000000..39bddc1
--- /dev/null
+++ b/package/freescale-imx/imx-codec/imx-codec.hash
@@ -0,0 +1,2 @@
+# locally computed
+sha256	62bda182143cde9743cba0eb2a1c315a53cb434294605742f9fc364219958888  imx-codec-4.0.9.bin
diff --git a/package/freescale-imx/imx-codec/imx-codec.mk b/package/freescale-imx/imx-codec/imx-codec.mk
new file mode 100644
index 0000000..67d3390
--- /dev/null
+++ b/package/freescale-imx/imx-codec/imx-codec.mk
@@ -0,0 +1,23 @@
+################################################################################
+#
+# imx-codec
+#
+################################################################################
+
+IMX_CODEC_VERSION = 4.0.9
+IMX_CODEC_SITE = $(FREESCALE_IMX_SITE)
+IMX_CODEC_SOURCE = imx-codec-$(IMX_CODEC_VERSION).bin
+IMX_CODEC_INSTALL_STAGING = YES
+
+IMX_CODEC_LICENSE = NXP Semiconductor Software License Agreement, BSD-3c (flac, ogg headers)
+IMX_CODEC_LICENSE_FILES = EULA COPYING
+IMX_CODEC_REDISTRIBUTE = NO
+
+define IMX_CODEC_EXTRACT_CMDS
+	$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(IMX_CODEC_SOURCE))
+endef
+
+# FIXME The Makefile installs both the arm9 and arm11 versions of the
+# libraries, but we only need one of them.
+
+$(eval $(autotools-package))
diff --git a/package/gstreamer/gst-fsl-plugins/Config.in b/package/gstreamer/gst-fsl-plugins/Config.in
index 0407dc5..8c82a4a 100644
--- a/package/gstreamer/gst-fsl-plugins/Config.in
+++ b/package/gstreamer/gst-fsl-plugins/Config.in
@@ -9,12 +9,12 @@ config BR2_PACKAGE_GST_FSL_PLUGINS
 	bool "gst-fsl-plugins"
 	depends on BR2_LINUX_KERNEL
 	depends on BR2_arm # Only relevant for i.MX
-	depends on BR2_TOOLCHAIN_USES_GLIBC # libfslcodec
+	depends on BR2_TOOLCHAIN_USES_GLIBC # imx-codec
 	select BR2_PACKAGE_GST_PLUGINS_BASE
 	select BR2_PACKAGE_LIBFSLVPUWRAP if BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
 	select BR2_PACKAGE_IMX_LIB
 	select BR2_PACKAGE_LIBFSLPARSER
-	select BR2_PACKAGE_LIBFSLCODEC
+	select BR2_PACKAGE_IMX_CODEC
 	select BR2_PACKAGE_FREESCALE_IMX
 	help
 	  GStreamer plugins for hardware-accelerated audio and video
diff --git a/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk b/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
index fa0e093..50732bf 100644
--- a/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
+++ b/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
@@ -16,7 +16,7 @@ GST_FSL_PLUGINS_INSTALL_STAGING = YES
 GST_FSL_PLUGINS_AUTORECONF = YES
 
 GST_FSL_PLUGINS_DEPENDENCIES += host-pkgconf gstreamer gst-plugins-base \
-	imx-lib libfslparser libfslcodec
+	imx-lib libfslparser imx-codec
 
 ifeq ($(BR2_PACKAGE_FREESCALE_IMX_HAS_VPU),y)
 GST_FSL_PLUGINS_DEPENDENCIES += libfslvpuwrap
diff --git a/package/gstreamer1/gst1-imx/Config.in b/package/gstreamer1/gst1-imx/Config.in
index 0084483..3512666 100644
--- a/package/gstreamer1/gst1-imx/Config.in
+++ b/package/gstreamer1/gst1-imx/Config.in
@@ -18,6 +18,6 @@ config BR2_PACKAGE_GST1_IMX
 	  The VPU plugin is built when BR2_PACKAGE_LIBIMXVPUAPI is enabled.
 	  The EGL plugin is built when BR2_PACKAGE_IMX_GPU_VIV is enabled.
 	  The G2D plugin is built when BR2_PACKAGE_IMX_GPU_VIV_G2D is enabled.
-	  The MP3 plugin is built when BR2_PACKAGE_LIBFSLCODEC is enabled.
+	  The MP3 plugin is built when BR2_PACKAGE_IMX_CODEC is enabled.
 
 	  https://github.com/Freescale/gstreamer-imx
diff --git a/package/gstreamer1/gst1-imx/gst1-imx.mk b/package/gstreamer1/gst1-imx/gst1-imx.mk
index 8838110..f81d8c9 100644
--- a/package/gstreamer1/gst1-imx/gst1-imx.mk
+++ b/package/gstreamer1/gst1-imx/gst1-imx.mk
@@ -27,8 +27,8 @@ ifeq ($(BR2_PACKAGE_GST1_PLUGINS_BAD),y)
 GST1_IMX_DEPENDENCIES += gst1-plugins-bad
 endif
 
-ifeq ($(BR2_PACKAGE_LIBFSLCODEC),y)
-GST1_IMX_DEPENDENCIES += libfslcodec
+ifeq ($(BR2_PACKAGE_IMX_CODEC),y)
+GST1_IMX_DEPENDENCIES += imx-codec
 endif
 
 ifeq ($(BR2_PACKAGE_LIBIMXVPUAPI),y)
diff --git a/package/libfslcodec/Config.in b/package/libfslcodec/Config.in
deleted file mode 100644
index d2007fe..0000000
--- a/package/libfslcodec/Config.in
+++ /dev/null
@@ -1,13 +0,0 @@
-config BR2_PACKAGE_LIBFSLCODEC
-	bool "libfslcodec"
-	depends on BR2_arm # Only relevant for i.MX
-	depends on BR2_TOOLCHAIN_USES_GLIBC # prebuilt binaries
-	help
-	  Binary codec libraries for the Freescale i.MX SoCs.
-
-	  This library is provided by Freescale as-is and doesn't have
-	  an upstream.
-
-comment "libfslcodec needs an (e)glibc toolchain"
-	depends on BR2_arm
-	depends on !BR2_TOOLCHAIN_USES_GLIBC
diff --git a/package/libfslcodec/libfslcodec.hash b/package/libfslcodec/libfslcodec.hash
deleted file mode 100644
index fd934f7..0000000
--- a/package/libfslcodec/libfslcodec.hash
+++ /dev/null
@@ -1,2 +0,0 @@
-# locally computed
-sha256	544ffc5989bce18ca50c7a826cc03370b1cf8455335e4291ef0c0779b4c33de0  libfslcodec-4.0.8.bin
diff --git a/package/libfslcodec/libfslcodec.mk b/package/libfslcodec/libfslcodec.mk
deleted file mode 100644
index 502390f..0000000
--- a/package/libfslcodec/libfslcodec.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-################################################################################
-#
-# libfslcodec
-#
-################################################################################
-
-LIBFSLCODEC_VERSION = 4.0.8
-LIBFSLCODEC_SITE = $(FREESCALE_IMX_SITE)
-LIBFSLCODEC_SOURCE = libfslcodec-$(LIBFSLCODEC_VERSION).bin
-LIBFSLCODEC_INSTALL_STAGING = YES
-
-LIBFSLCODEC_LICENSE = Freescale Semiconductor Software License Agreement, BSD-3c (flac, ogg headers)
-LIBFSLCODEC_LICENSE_FILES = EULA COPYING
-LIBFSLCODEC_REDISTRIBUTE = NO
-
-define LIBFSLCODEC_EXTRACT_CMDS
-	$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(LIBFSLCODEC_SOURCE))
-endef
-
-# FIXME The Makefile installs both the arm9 and arm11 versions of the
-# libraries, but we only need one of them.
-
-$(eval $(autotools-package))
-- 
1.9.1

[Buildroot] [PATCH v2 09/14] imx-codec: rename from libfslcodec and bump version to 4.0.9

[Gary Bisson]

Andrew, All,

On Fri, Jun 10, 2016 at 8:13 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> --[aac_dec] refine the code for pure c build
>   aac decoder c build need float point support, which use some
>   float point function.
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/4b91194
>
> Implicitly tested through gstreamer as the 0.10 plugin relies on it:
>  # gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>

Regards,
Gary

[Buildroot] [PATCH v2 10/14] imx-parser: rename from libfslparser and bump version to 4.0.9

[Andrew Webster]

Changelog:
--Add aac latm parser in parser_libs, support aac latm in mpeg2 parser

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/e2c6f10

Implicitly tested through gstreamer as the 0.10 plugin relies on it:
 # gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
Changes v1 -> v2:
  - added test procedure to comment
  - moved legacy config under 2016.08 section
  - renamed Freescale to NXP in Config.in

 Config.in.legacy                                   |  7 +++++++
 package/Config.in                                  |  1 -
 package/freescale-imx/Config.in                    |  1 +
 .../imx-parser}/Config.in                          |  4 ++--
 package/freescale-imx/imx-parser/imx-parser.hash   |  2 ++
 package/freescale-imx/imx-parser/imx-parser.mk     | 23 ++++++++++++++++++++++
 package/gstreamer/gst-fsl-plugins/Config.in        |  2 +-
 .../gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk   |  2 +-
 package/libfslparser/libfslparser.hash             |  2 --
 package/libfslparser/libfslparser.mk               | 23 ----------------------
 10 files changed, 37 insertions(+), 30 deletions(-)
 rename package/{libfslparser => freescale-imx/imx-parser}/Config.in (78%)
 create mode 100644 package/freescale-imx/imx-parser/imx-parser.hash
 create mode 100644 package/freescale-imx/imx-parser/imx-parser.mk
 delete mode 100644 package/libfslparser/libfslparser.hash
 delete mode 100644 package/libfslparser/libfslparser.mk

diff --git a/Config.in.legacy b/Config.in.legacy
index e5a568d..12426c9 100644
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -145,6 +145,13 @@ endif
 ###############################################################################
 comment "Legacy options removed in 2016.08"
 
+config BR2_PACKAGE_LIBFSLPARSER
+	bool "libfslparser has been renamed to imx-parser"
+	select BR2_LEGACY
+	select BR2_PACKAGE_IMX_PARSER
+	help
+	  The libfslparser has been renamed to match the renamed package.
+
 config BR2_PACKAGE_LIBFSLCODEC
 	bool "libfslcodec has been renamed to imx-codec"
 	select BR2_LEGACY
diff --git a/package/Config.in b/package/Config.in
index 1cdbaa0..6760af0 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -1098,7 +1098,6 @@ menu "Multimedia"
 	source "package/libdvdnav/Config.in"
 	source "package/libdvdread/Config.in"
 	source "package/libebml/Config.in"
-	source "package/libfslparser/Config.in"
 	source "package/libfslvpuwrap/Config.in"
 	source "package/libhdhomerun/Config.in"
 	source "package/libimxvpuapi/Config.in"
diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in
index 052de5a..868e51c 100644
--- a/package/freescale-imx/Config.in
+++ b/package/freescale-imx/Config.in
@@ -52,6 +52,7 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
 source "package/freescale-imx/imx-codec/Config.in"
 source "package/freescale-imx/imx-kobs/Config.in"
 source "package/freescale-imx/imx-lib/Config.in"
+source "package/freescale-imx/imx-parser/Config.in"
 source "package/freescale-imx/imx-uuc/Config.in"
 source "package/freescale-imx/imx-vpu/Config.in"
 source "package/freescale-imx/firmware-imx/Config.in"
diff --git a/package/freescale-imx/imx-parser/Config.in b/package/freescale-imx/imx-parser/Config.in
new file mode 100644
index 0000000..526f066
--- /dev/null
+++ b/package/freescale-imx/imx-parser/Config.in
@@ -0,0 +1,8 @@
+config BR2_PACKAGE_IMX_PARSER
+	bool "imx-parser"
+	depends on BR2_arm # Only relevant for i.MX
+	help
+	  Binary parser libraries for the NXP i.MX SoCs.
+
+	  This library is provided by NXP as-is and doesn't have
+	  an upstream.
diff --git a/package/freescale-imx/imx-parser/imx-parser.hash b/package/freescale-imx/imx-parser/imx-parser.hash
new file mode 100644
index 0000000..2193c66
--- /dev/null
+++ b/package/freescale-imx/imx-parser/imx-parser.hash
@@ -0,0 +1,2 @@
+# locally computed
+sha256	1bec0101843db2e95d61e3dbe9e35172d874e54be19cc5d8bf72a735d5e3236f  imx-parser-4.0.9.bin
diff --git a/package/freescale-imx/imx-parser/imx-parser.mk b/package/freescale-imx/imx-parser/imx-parser.mk
new file mode 100644
index 0000000..a207d6e
--- /dev/null
+++ b/package/freescale-imx/imx-parser/imx-parser.mk
@@ -0,0 +1,23 @@
+################################################################################
+#
+# imx-parser
+#
+################################################################################
+
+IMX_PARSER_VERSION = 4.0.9
+IMX_PARSER_SITE = $(FREESCALE_IMX_SITE)
+IMX_PARSER_SOURCE = imx-parser-$(IMX_PARSER_VERSION).bin
+IMX_PARSER_INSTALL_STAGING = YES
+
+IMX_PARSER_LICENSE = NXP Semiconductor Software License Agreement
+IMX_PARSER_LICENSE_FILES = EULA COPYING
+IMX_PARSER_REDISTRIBUTE = NO
+
+define IMX_PARSER_EXTRACT_CMDS
+	$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(IMX_PARSER_SOURCE))
+endef
+
+# The Makefile installs several versions of the libraries, but we only
+# need one of them, depending on the platform.
+
+$(eval $(autotools-package))
diff --git a/package/gstreamer/gst-fsl-plugins/Config.in b/package/gstreamer/gst-fsl-plugins/Config.in
index 8c82a4a..38c8a47 100644
--- a/package/gstreamer/gst-fsl-plugins/Config.in
+++ b/package/gstreamer/gst-fsl-plugins/Config.in
@@ -13,7 +13,7 @@ config BR2_PACKAGE_GST_FSL_PLUGINS
 	select BR2_PACKAGE_GST_PLUGINS_BASE
 	select BR2_PACKAGE_LIBFSLVPUWRAP if BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
 	select BR2_PACKAGE_IMX_LIB
-	select BR2_PACKAGE_LIBFSLPARSER
+	select BR2_PACKAGE_IMX_PARSER
 	select BR2_PACKAGE_IMX_CODEC
 	select BR2_PACKAGE_FREESCALE_IMX
 	help
diff --git a/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk b/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
index 50732bf..8db8d1b 100644
--- a/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
+++ b/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
@@ -16,7 +16,7 @@ GST_FSL_PLUGINS_INSTALL_STAGING = YES
 GST_FSL_PLUGINS_AUTORECONF = YES
 
 GST_FSL_PLUGINS_DEPENDENCIES += host-pkgconf gstreamer gst-plugins-base \
-	imx-lib libfslparser imx-codec
+	imx-lib imx-parser imx-codec
 
 ifeq ($(BR2_PACKAGE_FREESCALE_IMX_HAS_VPU),y)
 GST_FSL_PLUGINS_DEPENDENCIES += libfslvpuwrap
diff --git a/package/libfslparser/Config.in b/package/libfslparser/Config.in
deleted file mode 100644
index e3ab980..0000000
--- a/package/libfslparser/Config.in
+++ /dev/null
@@ -1,8 +0,0 @@
-config BR2_PACKAGE_LIBFSLPARSER
-	bool "libfslparser"
-	depends on BR2_arm # Only relevant for i.MX
-	help
-	  Binary parser libraries for the Freescale i.MX SoCs.
-
-	  This library is provided by Freescale as-is and doesn't have
-	  an upstream.
diff --git a/package/libfslparser/libfslparser.hash b/package/libfslparser/libfslparser.hash
deleted file mode 100644
index c49345f..0000000
--- a/package/libfslparser/libfslparser.hash
+++ /dev/null
@@ -1,2 +0,0 @@
-# locally computed
-sha256	a04621783c84a9776216caff9563c7f840fddd584b0b2d27738d6ca6d2c77f32  libfslparser-4.0.8.bin
diff --git a/package/libfslparser/libfslparser.mk b/package/libfslparser/libfslparser.mk
deleted file mode 100644
index 44e6039..0000000
--- a/package/libfslparser/libfslparser.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-################################################################################
-#
-# libfslparser
-#
-################################################################################
-
-LIBFSLPARSER_VERSION = 4.0.8
-LIBFSLPARSER_SITE = $(FREESCALE_IMX_SITE)
-LIBFSLPARSER_SOURCE = libfslparser-$(LIBFSLPARSER_VERSION).bin
-LIBFSLPARSER_INSTALL_STAGING = YES
-
-LIBFSLPARSER_LICENSE = Freescale Semiconductor Software License Agreement
-LIBFSLPARSER_LICENSE_FILES = EULA COPYING
-LIBFSLPARSER_REDISTRIBUTE = NO
-
-define LIBFSLPARSER_EXTRACT_CMDS
-	$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(LIBFSLPARSER_SOURCE))
-endef
-
-# The Makefile installs several versions of the libraries, but we only
-# need one of them, depending on the platform.
-
-$(eval $(autotools-package))
-- 
1.9.1

[Buildroot] [PATCH v2 10/14] imx-parser: rename from libfslparser and bump version to 4.0.9

[Gary Bisson]

Andrew, All,

On Fri, Jun 10, 2016 at 8:13 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> --Add aac latm parser in parser_libs, support aac latm in mpeg2 parser
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/e2c6f10
>
> Implicitly tested through gstreamer as the 0.10 plugin relies on it:
>  # gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>

Regards,
Gary

[Buildroot] [PATCH v2 10/14] imx-parser: rename from libfslparser and bump version to 4.0.9

[Thomas Petazzoni]

Hello,

On Fri, 10 Jun 2016 14:13:18 -0400, Andrew Webster wrote:

> +IMX_PARSER_VERSION = 4.0.9
> +IMX_PARSER_SITE = $(FREESCALE_IMX_SITE)
> +IMX_PARSER_SOURCE = imx-parser-$(IMX_PARSER_VERSION).bin
> +IMX_PARSER_INSTALL_STAGING = YES
> +
> +IMX_PARSER_LICENSE = NXP Semiconductor Software License Agreement
> +IMX_PARSER_LICENSE_FILES = EULA COPYING
> +IMX_PARSER_REDISTRIBUTE = NO
> +
> +define IMX_PARSER_EXTRACT_CMDS
> +	$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(IMX_PARSER_SOURCE))
> +endef
> +
> +# The Makefile installs several versions of the libraries, but we only
> +# need one of them, depending on the platform.

This package seems to have several variants of the libraries, including
some that are enabled/disabled with --enable-fsw / --enable-fhw. It
would be good to understand what those variants are, and if they are
related to ARM EABIhf or not.

Indeed, it is a bit strange that some parts of the i.MX6 blobs are
EABIhf only (imx-gpu-viv), while some other parts don't see to be
EABIhf. Or maybe imx-parser has both EABI and EABIhf variants ?

In any case, a clarification would be good. I've nonetheless applied,
since it was already something that wasn't clear in the pre-existing
libfslparser package.

Thanks!

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH v2 11/14] imx-vpuwrap: rename from libfslvpuwrap and bump version to 1.0.65

[Andrew Webster]

Changelog:
--Update 'nLastFrameEndPosPhy' in seqinit stage to avoid feed
  the same SPS to vpu repeatedly.

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/d6b9490

Implicitly tested through gstreamer as the 0.10 plugin relies on it:
 # gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
Changes v1 -> v2:
  - added test procedure to comment
  - moved legacy config under 2016.08 section
  - renamed Freescale to NXP in Config.in
  - updated references in kodi and gst-fsl-plugins

 Config.in.legacy                                    |  7 +++++++
 package/Config.in                                   |  1 -
 package/freescale-imx/Config.in                     |  1 +
 .../imx-vpuwrap}/Config.in                          |  8 ++++----
 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash  |  2 ++
 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk    | 21 +++++++++++++++++++++
 package/gstreamer/gst-fsl-plugins/Config.in         |  2 +-
 .../gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk    |  2 +-
 package/kodi/kodi.mk                                |  4 ++--
 package/libfslvpuwrap/libfslvpuwrap.hash            |  2 --
 package/libfslvpuwrap/libfslvpuwrap.mk              | 21 ---------------------
 11 files changed, 39 insertions(+), 32 deletions(-)
 rename package/{libfslvpuwrap => freescale-imx/imx-vpuwrap}/Config.in (69%)
 create mode 100644 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash
 create mode 100644 package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk
 delete mode 100644 package/libfslvpuwrap/libfslvpuwrap.hash
 delete mode 100644 package/libfslvpuwrap/libfslvpuwrap.mk

diff --git a/Config.in.legacy b/Config.in.legacy
index 12426c9..bb12d7b 100644
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -145,6 +145,13 @@ endif
 ###############################################################################
 comment "Legacy options removed in 2016.08"
 
+config BR2_PACKAGE_LIBFSLVPUWRAP
+	bool "libfslvpuwrap has been renamed to imx-vpuwrap"
+	select BR2_LEGACY
+	select BR2_PACKAGE_IMX_VPUWRAP
+	help
+	  The libfslvpuwrap has been renamed to match the renamed package.
+
 config BR2_PACKAGE_LIBFSLPARSER
 	bool "libfslparser has been renamed to imx-parser"
 	select BR2_LEGACY
diff --git a/package/Config.in b/package/Config.in
index 6760af0..617bfde 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -1098,7 +1098,6 @@ menu "Multimedia"
 	source "package/libdvdnav/Config.in"
 	source "package/libdvdread/Config.in"
 	source "package/libebml/Config.in"
-	source "package/libfslvpuwrap/Config.in"
 	source "package/libhdhomerun/Config.in"
 	source "package/libimxvpuapi/Config.in"
 	source "package/libmatroska/Config.in"
diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in
index 868e51c..056728f 100644
--- a/package/freescale-imx/Config.in
+++ b/package/freescale-imx/Config.in
@@ -55,6 +55,7 @@ source "package/freescale-imx/imx-lib/Config.in"
 source "package/freescale-imx/imx-parser/Config.in"
 source "package/freescale-imx/imx-uuc/Config.in"
 source "package/freescale-imx/imx-vpu/Config.in"
+source "package/freescale-imx/imx-vpuwrap/Config.in"
 source "package/freescale-imx/firmware-imx/Config.in"
 if (BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX51 || BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX53)
 source "package/freescale-imx/gpu-amd-bin-mx51/Config.in"
diff --git a/package/libfslvpuwrap/Config.in b/package/freescale-imx/imx-vpuwrap/Config.in
similarity index 59%
rename from package/libfslvpuwrap/Config.in
rename to package/freescale-imx/imx-vpuwrap/Config.in
index 72f7126..3509595 100644
--- a/package/libfslvpuwrap/Config.in
+++ b/package/freescale-imx/imx-vpuwrap/Config.in
@@ -1,13 +1,13 @@
-comment "libfslvpuwrap needs an imx-specific Linux kernel to be built"
+comment "imx-vpuwrap needs an imx-specific Linux kernel to be built"
 	depends on BR2_arm
 	depends on !BR2_LINUX_KERNEL
 
-comment "libfslvpuwrap needs an i.MX platform with VPU support"
+comment "imx-vpuwrap needs an i.MX platform with VPU support"
 	depends on BR2_arm
 	depends on BR2_LINUX_KERNEL && !BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
 
-config BR2_PACKAGE_LIBFSLVPUWRAP
-	bool "libfslvpuwrap"
+config BR2_PACKAGE_IMX_VPUWRAP
+	bool "imx-vpuwrap"
 	depends on BR2_LINUX_KERNEL
 	depends on BR2_arm # Only relevant for i.MX
 	depends on BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
@@ -15,5 +15,5 @@ config BR2_PACKAGE_LIBFSLVPUWRAP
 	help
 	  Wrapper library for the vpu library, giving it a different API.
 
-	  This library is provided by Freescale as-is and doesn't have
+	  This library is provided by NXP as-is and doesn't have
 	  an upstream.
diff --git a/package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash b/package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash
new file mode 100644
index 0000000..42b97a1
--- /dev/null
+++ b/package/freescale-imx/imx-vpuwrap/imx-vpuwrap.hash
@@ -0,0 +1,2 @@
+# locally computed
+sha256	ddeacb7d9cb26c8864374df6d3f090aad47cd2ae409c2b9c817b773447252d61  imx-vpuwrap-1.0.65.bin
diff --git a/package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk b/package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk
new file mode 100644
index 0000000..da0e32c
--- /dev/null
+++ b/package/freescale-imx/imx-vpuwrap/imx-vpuwrap.mk
@@ -0,0 +1,21 @@
+################################################################################
+#
+# imx-vpuwrap
+#
+################################################################################
+
+IMX_VPUWRAP_VERSION = 1.0.65
+IMX_VPUWRAP_SITE = $(FREESCALE_IMX_SITE)
+IMX_VPUWRAP_SOURCE = imx-vpuwrap-$(IMX_VPUWRAP_VERSION).bin
+IMX_VPUWRAP_DEPENDENCIES = imx-vpu
+IMX_VPUWRAP_INSTALL_STAGING = YES
+
+IMX_VPUWRAP_LICENSE = NXP Semiconductor Software License Agreement
+IMX_VPUWRAP_LICENSE_FILES = EULA COPYING
+IMX_VPUWRAP_REDISTRIBUTE = NO
+
+define IMX_VPUWRAP_EXTRACT_CMDS
+	$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(IMX_VPUWRAP_SOURCE))
+endef
+
+$(eval $(autotools-package))
diff --git a/package/gstreamer/gst-fsl-plugins/Config.in b/package/gstreamer/gst-fsl-plugins/Config.in
index 38c8a47..f34a067 100644
--- a/package/gstreamer/gst-fsl-plugins/Config.in
+++ b/package/gstreamer/gst-fsl-plugins/Config.in
@@ -11,7 +11,7 @@ config BR2_PACKAGE_GST_FSL_PLUGINS
 	depends on BR2_arm # Only relevant for i.MX
 	depends on BR2_TOOLCHAIN_USES_GLIBC # imx-codec
 	select BR2_PACKAGE_GST_PLUGINS_BASE
-	select BR2_PACKAGE_LIBFSLVPUWRAP if BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
+	select BR2_PACKAGE_IMX_VPUWRAP if BR2_PACKAGE_FREESCALE_IMX_HAS_VPU
 	select BR2_PACKAGE_IMX_LIB
 	select BR2_PACKAGE_IMX_PARSER
 	select BR2_PACKAGE_IMX_CODEC
diff --git a/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk b/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
index 8db8d1b..65993a2 100644
--- a/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
+++ b/package/gstreamer/gst-fsl-plugins/gst-fsl-plugins.mk
@@ -19,7 +19,7 @@ GST_FSL_PLUGINS_DEPENDENCIES += host-pkgconf gstreamer gst-plugins-base \
 	imx-lib imx-parser imx-codec
 
 ifeq ($(BR2_PACKAGE_FREESCALE_IMX_HAS_VPU),y)
-GST_FSL_PLUGINS_DEPENDENCIES += libfslvpuwrap
+GST_FSL_PLUGINS_DEPENDENCIES += imx-vpuwrap
 endif
 
 GST_FSL_PLUGINS_CONF_ENV = \
diff --git a/package/kodi/kodi.mk b/package/kodi/kodi.mk
index e163c24..90c50c3 100644
--- a/package/kodi/kodi.mk
+++ b/package/kodi/kodi.mk
@@ -53,8 +53,8 @@ KODI_CONF_ENV += INCLUDES="-I$(STAGING_DIR)/usr/include/interface/vcos/pthreads
 	LIBS="-lvcos -lvchostif"
 endif
 
-ifeq ($(BR2_PACKAGE_LIBFSLVPUWRAP),y)
-KODI_DEPENDENCIES += libfslvpuwrap
+ifeq ($(BR2_PACKAGE_IMX_VPUWRAP),y)
+KODI_DEPENDENCIES += imx-vpuwrap
 KODI_CONF_OPTS += --enable-codec=imxvpu
 endif
 
diff --git a/package/libfslvpuwrap/libfslvpuwrap.hash b/package/libfslvpuwrap/libfslvpuwrap.hash
deleted file mode 100644
index e987077..0000000
--- a/package/libfslvpuwrap/libfslvpuwrap.hash
+++ /dev/null
@@ -1,2 +0,0 @@
-# locally computed
-sha256	0717faccb5413dc95ce9ad919400095ecf722320478c924366793a6cc450ae16  libfslvpuwrap-1.0.62.bin
diff --git a/package/libfslvpuwrap/libfslvpuwrap.mk b/package/libfslvpuwrap/libfslvpuwrap.mk
deleted file mode 100644
index 12a4e86..0000000
--- a/package/libfslvpuwrap/libfslvpuwrap.mk
+++ /dev/null
@@ -1,21 +0,0 @@
-################################################################################
-#
-# libfslvpuwrap
-#
-################################################################################
-
-LIBFSLVPUWRAP_VERSION = 1.0.62
-LIBFSLVPUWRAP_SITE = $(FREESCALE_IMX_SITE)
-LIBFSLVPUWRAP_SOURCE = libfslvpuwrap-$(LIBFSLVPUWRAP_VERSION).bin
-LIBFSLVPUWRAP_DEPENDENCIES = imx-vpu
-LIBFSLVPUWRAP_INSTALL_STAGING = YES
-
-LIBFSLVPUWRAP_LICENSE = Freescale Semiconductor Software License Agreement
-LIBFSLVPUWRAP_LICENSE_FILES = EULA COPYING
-LIBFSLVPUWRAP_REDISTRIBUTE = NO
-
-define LIBFSLVPUWRAP_EXTRACT_CMDS
-	$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(LIBFSLVPUWRAP_SOURCE))
-endef
-
-$(eval $(autotools-package))
-- 
1.9.1

[Buildroot] [PATCH v2 11/14] imx-vpuwrap: rename from libfslvpuwrap and bump version to 1.0.65

[Gary Bisson]

Andrew, All,

On Fri, Jun 10, 2016 at 8:13 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> --Update 'nLastFrameEndPosPhy' in seqinit stage to avoid feed
>   the same SPS to vpu repeatedly.
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/d6b9490
>
> Implicitly tested through gstreamer as the 0.10 plugin relies on it:
>  # gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>

Regards,
Gary

[Buildroot] [PATCH v2 12/14] libimxvpuapi: bump version to 0.10.2

[Andrew Webster]

Changelog:
- fix AUD NAL positioning in h.264 encoder output
  (SPS/PPS/AUD were ordered incorrectly - AUD has to come first, not last)
- fix build error with examples when --enable-static is used
- pass quality factor in simplified JPEG encoder interface correctly
- add functions for querying and setting header data
  useful for modifying headers, like VUI data in the SPS RBSP
- documentation updates

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/c999668

Implicitly tested through gstreamer as the plugin relies on it:
 # gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
Changes v1 -> v2:
  - added test procedure to comment

 package/libimxvpuapi/libimxvpuapi.hash | 2 +-
 package/libimxvpuapi/libimxvpuapi.mk   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/package/libimxvpuapi/libimxvpuapi.hash b/package/libimxvpuapi/libimxvpuapi.hash
index fd90a20..c8cabcf 100644
--- a/package/libimxvpuapi/libimxvpuapi.hash
+++ b/package/libimxvpuapi/libimxvpuapi.hash
@@ -1,2 +1,2 @@
 # locally computed hash
-sha256 8d7aeed88c06fda44318cef9565ae47b86461bd309908b1103a7974ed0822a8d  libimxvpuapi-0.10.1.tar.gz
+sha256 8e6dc4105db6164c0de72fd60eb73f4ba1632f7ba5052b1abc834b462b566da2  libimxvpuapi-0.10.2.tar.gz
diff --git a/package/libimxvpuapi/libimxvpuapi.mk b/package/libimxvpuapi/libimxvpuapi.mk
index e0d8cc9..df84806 100644
--- a/package/libimxvpuapi/libimxvpuapi.mk
+++ b/package/libimxvpuapi/libimxvpuapi.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBIMXVPUAPI_VERSION = 0.10.1
+LIBIMXVPUAPI_VERSION = 0.10.2
 LIBIMXVPUAPI_SITE = $(call github,Freescale,libimxvpuapi,$(LIBIMXVPUAPI_VERSION))
 LIBIMXVPUAPI_LICENSE = LGPLv2.1+
 LIBIMXVPUAPI_LICENSE_FILES = LICENSE
-- 
1.9.1

[Buildroot] [PATCH v2 12/14] libimxvpuapi: bump version to 0.10.2

[Gary Bisson]

Andrew, All,

On Fri, Jun 10, 2016 at 8:13 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> - fix AUD NAL positioning in h.264 encoder output
>   (SPS/PPS/AUD were ordered incorrectly - AUD has to come first, not last)
> - fix build error with examples when --enable-static is used
> - pass quality factor in simplified JPEG encoder interface correctly
> - add functions for querying and setting header data
>   useful for modifying headers, like VUI data in the SPS RBSP
> - documentation updates
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/c999668
>
> Implicitly tested through gstreamer as the plugin relies on it:
>  # gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>

Regards,
Gary

[Buildroot] [PATCH v2 13/14] imx-lib: bump version to 5.4

[Andrew Webster]

Changelog:
- Remove platform check in hdmi-cec and imx-lib - simplify to support builds
on multiple machines
- For ipu use the dummy defaul object to fix build issues on non-ipu hardware

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/7946533

Implicitly tested through gstreamer as the
plugins rely on them for vpu decoding, e.g.:
 # gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
 # gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
 # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
   matroskademux ! imxvpudec ! imxipuvideosink

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
Changes v1 -> v2:
  - added test procedure to comment

 package/freescale-imx/imx-lib/imx-lib.hash | 2 +-
 package/freescale-imx/imx-lib/imx-lib.mk   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/package/freescale-imx/imx-lib/imx-lib.hash b/package/freescale-imx/imx-lib/imx-lib.hash
index 8e4bd73..76dcb23 100644
--- a/package/freescale-imx/imx-lib/imx-lib.hash
+++ b/package/freescale-imx/imx-lib/imx-lib.hash
@@ -1,2 +1,2 @@
 # locally computed
-sha256 2b4547ffb1de328cf8997a09a423c6f015d808493efd11a98a5d42c6497e3445  imx-lib-5.1.tar.gz
+sha256 8d12c4a0a44d29569f1ead3a36adc28402b9c4036b53e11dd3ebf2295e3ce1d0  imx-lib-5.4.tar.gz
diff --git a/package/freescale-imx/imx-lib/imx-lib.mk b/package/freescale-imx/imx-lib/imx-lib.mk
index b49357b..d3603ca 100644
--- a/package/freescale-imx/imx-lib/imx-lib.mk
+++ b/package/freescale-imx/imx-lib/imx-lib.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-IMX_LIB_VERSION = 5.1
+IMX_LIB_VERSION = 5.4
 IMX_LIB_SITE = $(FREESCALE_IMX_SITE)
 IMX_LIB_LICENSE = LGPLv2.1+
 IMX_LIB_LICENSE_FILES = COPYING-LGPL-2.1
-- 
1.9.1

[Buildroot] [PATCH v2 13/14] imx-lib: bump version to 5.4

[Gary Bisson]

Andrew, All,

On Fri, Jun 10, 2016 at 8:13 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> - Remove platform check in hdmi-cec and imx-lib - simplify to support builds
> on multiple machines
> - For ipu use the dummy defaul object to fix build issues on non-ipu hardware
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/7946533
>
> Implicitly tested through gstreamer as the
> plugins rely on them for vpu decoding, e.g.:
>  # gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
>  # gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
>  # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
>    matroskademux ! imxvpudec ! imxipuvideosink
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>

Regards,
Gary

[Buildroot] [PATCH v2 14/14] imx-kobs: bump version to 5.4

[Andrew Webster]

Changelog:
- Check raw mode flag for backward compatbility
- Fix membership name in bch geometry structure.
- Fix the previous implementation that may ruin the BBM
- Adapt raw page accesses to match the new raw_read/write implementation

The old raw access implementation (in GPMI driver) was considering that
data and OOB data were separated in their respective regions (the data
area and the OOB area of the page), which is not true.
They are actually interleaved this way:

METADATA + ((DATA + ECCBYTES) * N)

The new raw access implementation (in the GPMI driver) is hiding this
weird
layout to MTD users by exposing a more common layout:

DATA + METADATA + (N * ECCBYTES)

Here METADATA + (N * ECCBYTES) are exposed as if they were stored in the
OOB area.

Unfortunately kobs-ng rely on this weird layout when accessing the NAND
in raw mode.

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/a7545b1

Signed-off-by: Andrew Webster <awebster@arcx.com>
---
Changes v1 -> v2:
  - added to patch set

 package/freescale-imx/imx-kobs/imx-kobs.hash | 3 +--
 package/freescale-imx/imx-kobs/imx-kobs.mk   | 2 +-
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/package/freescale-imx/imx-kobs/imx-kobs.hash b/package/freescale-imx/imx-kobs/imx-kobs.hash
index 09d42ed..b942bd3 100644
--- a/package/freescale-imx/imx-kobs/imx-kobs.hash
+++ b/package/freescale-imx/imx-kobs/imx-kobs.hash
@@ -1,2 +1 @@
-# locally computed
-sha256	45f729fc2b49556f1ca9df778f52bf5cc749cfe53664c8206daab29991c5f6c1  imx-kobs-5.3.tar.gz
+sha256	85171b46068ac47c42fedb8104167bf9afd33dd9527ed127e1ca2eb29d7a86bf  imx-kobs-5.4.tar.gz
diff --git a/package/freescale-imx/imx-kobs/imx-kobs.mk b/package/freescale-imx/imx-kobs/imx-kobs.mk
index cc4721f..b80d5bd 100644
--- a/package/freescale-imx/imx-kobs/imx-kobs.mk
+++ b/package/freescale-imx/imx-kobs/imx-kobs.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-IMX_KOBS_VERSION = 5.3
+IMX_KOBS_VERSION = 5.4
 IMX_KOBS_SITE = $(FREESCALE_IMX_SITE)
 IMX_KOBS_LICENSE = GPLv2+
 IMX_KOBS_LICENSE_FILES = COPYING
-- 
1.9.1

[Buildroot] [PATCH v2 14/14] imx-kobs: bump version to 5.4

[Gary Bisson]

Andrew, All,

On Fri, Jun 10, 2016 at 8:14 PM, Andrew Webster <awebster@arcx.com> wrote:
> Changelog:
> - Check raw mode flag for backward compatbility
> - Fix membership name in bch geometry structure.
> - Fix the previous implementation that may ruin the BBM
> - Adapt raw page accesses to match the new raw_read/write implementation
>
> The old raw access implementation (in GPMI driver) was considering that
> data and OOB data were separated in their respective regions (the data
> area and the OOB area of the page), which is not true.
> They are actually interleaved this way:
>
> METADATA + ((DATA + ECCBYTES) * N)
>
> The new raw access implementation (in the GPMI driver) is hiding this
> weird
> layout to MTD users by exposing a more common layout:
>
> DATA + METADATA + (N * ECCBYTES)
>
> Here METADATA + (N * ECCBYTES) are exposed as if they were stored in the
> OOB area.
>
> Unfortunately kobs-ng rely on this weird layout when accessing the NAND
> in raw mode.
>
> This patch is based on the Yocto equivalent:
> https://github.com/Freescale/meta-fsl-arm/commit/a7545b1
>
> Signed-off-by: Andrew Webster <awebster@arcx.com>

Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>

Cannot test it since I don't own a platform with NAND but the build is fine.

Regards,
Gary

[Buildroot] [PATCH v2 00/14] Bump NXP package versions

[Thomas Petazzoni]

Hello,

On Fri, 10 Jun 2016 14:09:04 -0400, Andrew Webster wrote:

> Changes v1 -> v2:
>   - Reordered patches to keep gpu related patches together and multimedia
>   patches together.
>   - Added patches for bumping the kernel/u-boot versions of NXP defconfigs
>   - Added patch to bump version of imx-kobs
>   - Added patch to bump version of kernel-module-imx-gpu-viv

Thanks Andrew for this new version! I'll wait for Gary's feedback on
the series.

Thanks,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH v2 00/14] Bump NXP package versions

[Gary Bisson]

Thomas, Andrew, All,

On Sat, Jun 11, 2016 at 3:20 PM, Thomas Petazzoni
<thomas.petazzoni@free-electrons.com> wrote:
> Hello,
>
> On Fri, 10 Jun 2016 14:09:04 -0400, Andrew Webster wrote:
>
>> Changes v1 -> v2:
>>   - Reordered patches to keep gpu related patches together and multimedia
>>   patches together.
>>   - Added patches for bumping the kernel/u-boot versions of NXP defconfigs
>>   - Added patch to bump version of imx-kobs
>>   - Added patch to bump version of kernel-module-imx-gpu-viv
>
> Thanks Andrew for this new version! I'll wait for Gary's feedback on
> the series.

I'm going to reply to each patch but overall I'm very happy with the series.

I've tested most of them using a Nitrogen6x + 3.14.52 kernel.

Thanks,
Gary

[Buildroot] [PATCH v2 00/14] Bump NXP package versions

[Thomas Petazzoni]

Hello,

On Fri, 10 Jun 2016 14:09:04 -0400, Andrew Webster wrote:

> Andrew Webster (14):
>   nxp defconfigs: bump u-boot version to 4.1.15_1.1.0_ga
>   nxp defconfigs: bump kernel version to 4.1.15
>   kernel-module-imx-gpu-viv: bump version to that of the 5.0.11.p8.4
>     release
>   imx-gpu-viv: bump version to 5.0.11-p8.4
>   xdriver_xf86-video-imx-viv: bump version to 5.0.11-p8.4
>   firmware-imx: bump to version 5.4
>   gst1-imx: bump to version 0.12.1
>   imx-vpu: bump to version 5.4.33
>   imx-codec: rename from libfslcodec and bump version to 4.0.9
>   imx-parser: rename from libfslparser and bump version to 4.0.9
>   imx-vpuwrap: rename from libfslvpuwrap and bump version to 1.0.65
>   libimxvpuapi: bump version to 0.10.2
>   imx-lib: bump version to 5.4
>   imx-kobs: bump version to 5.4

I've applied all 14 patches, some with a few changes (mainly after
comments from Gary). I'll reply individually to the patches for which I
made some changes, or for which I have some questions.

Thanks,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com