Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 09/20] package/skeleton: drop dependency on host-mkpasswd
Date: Sun, 23 Jul 2017 00:32:59 +0200	[thread overview]
Message-ID: <20170722223259.GJ9929@scaer> (raw)
In-Reply-To: <99ce17ed-eac5-bef0-4ac4-c74753925163@mind.be>

Arnout, All,

On 2017-07-22 23:24 +0200, Arnout Vandecappelle spake thusly:
>  This makes no sense to me...
> 
> On 18-07-17 19:25, Yann E. MORIN wrote:
> > Setting the root pasword is done in a target-finalize hook, so we do not
> > need to enforce a dependency from the skeleton onto host-mkpasswd.
> > 
> > Dropping that dependency will simplify making skeleton a virtual
> > package (in up-coming changes).
> 
>  How so? What's wrong with
> 
> SKELETON_COMMON_DEPENDENCIES += host-mkpasswd
> 
> in exactly the same place?

Indeed, it does not simplify much. But at least, that was a little bit
less code I had to carry over to the new skeleton infra, see below [0].

And as you've seen, this series was no picnic...

>  You forgot to mention the other interesting bit: it is now selected, so we are
> still sure it will get built before target-finalize.



> > This however introduces a slight change in behaviour: previously,
> > host-mkpasswd would only be built if we needed to hash the root password
> > from its plain-text value. Now, host-mkpasswd is always built as soon as
> > the root password is non-empty, even if already pre-hashed.
> > 
> > Since host-mkpasswd is a really tiny weeny package bundled in Buidlroot,
>                                                                 Buildroot

I think I have unconciously associated Buildroot and Beetlejuice in my
head, as Buidlroot sounds too much like Beetlejuice, and I do this typo
all the time. Not that I never typoes anything else, for that matters...
;-]

> > with only two C files, built as a single unit with a single gcc call,
> > the overhead is really minimal. Compared to the simplifications this
> > will allow in the skeleton packages (plural: common, sysv, systemd,
> > custom) to come, this overhead is acceptable.
> > 
> > Yet another simplification, even if small, to ease providing multiple
> > skeletons.

[0[] here I said it was but a small simplification. ;-)

> > Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
> 
>  Although I don't think it's really *necessary* to remove the dependency, it is
> certainly more correct. And we want to select host packages from Config.in
> anyway on the long run, so doing it only for not-yet-hashed passwords won't be
> possible anyway. Therefore:
> 
> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

Thanks! :-)

Regards,
Yann E. MORIN.

>  Regards,
>  Arnout
> 
> > ---
> >  package/skeleton/skeleton.mk | 1 -
> >  system/Config.in             | 1 +
> >  2 files changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/package/skeleton/skeleton.mk b/package/skeleton/skeleton.mk
> > index 4a66f6ceca..4ec1ecbb51 100644
> > --- a/package/skeleton/skeleton.mk
> > +++ b/package/skeleton/skeleton.mk
> > @@ -121,7 +121,6 @@ SKELETON_ROOT_PASSWORD =
> >  else ifneq ($(filter $$1$$% $$5$$% $$6$$%,$(SKELETON_TARGET_GENERIC_ROOT_PASSWD)),)
> >  SKELETON_ROOT_PASSWORD = '$(SKELETON_TARGET_GENERIC_ROOT_PASSWD)'
> >  else
> > -SKELETON_DEPENDENCIES += host-mkpasswd
> >  # This variable will only be evaluated in the finalize stage, so we can
> >  # be sure that host-mkpasswd will have already been built by that time.
> >  SKELETON_ROOT_PASSWORD = "`$(MKPASSWD) -m "$(SKELETON_TARGET_GENERIC_PASSWD_METHOD)" "$(SKELETON_TARGET_GENERIC_ROOT_PASSWD)"`"
> > diff --git a/system/Config.in b/system/Config.in
> > index ed539dcbe0..5cb921f108 100644
> > --- a/system/Config.in
> > +++ b/system/Config.in
> > @@ -224,6 +224,7 @@ config BR2_ROOTFS_MERGED_USR
> >  config BR2_TARGET_ENABLE_ROOT_LOGIN
> >  	bool "Enable root login with password"
> >  	default y
> > +	select BR2_PACKAGE_HOST_MKPASSWD if BR2_TARGET_GENERIC_ROOT_PASSWD != ""
> >  	help
> >  	  Allow root to log in with a password.
> >  
> > 
> 
> -- 
> Arnout Vandecappelle                          arnout at mind be
> Senior Embedded Software Architect            +32-16-286500
> Essensium/Mind                                http://www.mind.be
> G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
> LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
> GPG fingerprint:  7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

  reply	other threads:[~2017-07-22 22:32 UTC|newest]

Thread overview: 108+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-18 17:25 [Buildroot] [PATCH 00/20] system: properly handle systemd as init system Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 01/20] support/tests: allow properly indented config fragment Yann E. MORIN
2017-07-18 20:45   ` Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 02/20] core/pkg-generic: add variable to skip skeleton dependency Yann E. MORIN
2017-07-22 12:27   ` Arnout Vandecappelle
2017-07-23  9:12     ` Peter Korsgaard
2017-07-23  9:21       ` Yann E. MORIN
2017-07-23 13:01         ` Peter Korsgaard
2017-07-22 13:41   ` Thomas Petazzoni
2017-07-18 17:25 ` [Buildroot] [PATCH 03/20] package/skeleton: add macro to rsync skeleton directory Yann E. MORIN
2017-07-22 12:34   ` Arnout Vandecappelle
2017-07-22 13:02   ` Arnout Vandecappelle
2017-07-22 14:33     ` Yann E. MORIN
2017-07-22 13:42   ` Thomas Petazzoni
2017-07-18 17:25 ` [Buildroot] [PATCH 04/20] package/skeleton: make SKELETON_LIB_SYMLINK a macro Yann E. MORIN
2017-07-22 12:56   ` Arnout Vandecappelle
2017-07-22 19:47     ` Thomas Petazzoni
2017-07-22 21:02       ` [Buildroot] Is MIPS_NABI32 a 64-bit architecture? [was: [PATCH 04/20] package/skeleton: make SKELETON_LIB_SYMLINK a macro] Arnout Vandecappelle
2017-07-22 13:50   ` [Buildroot] [PATCH 04/20] package/skeleton: make SKELETON_LIB_SYMLINK a macro Thomas Petazzoni
2017-07-22 14:23     ` Yann E. MORIN
2017-07-22 19:45   ` Thomas Petazzoni
2017-07-18 17:25 ` [Buildroot] [PATCH 05/20] system: provide package-wide system variables and macros Yann E. MORIN
2017-07-22 13:00   ` Arnout Vandecappelle
2017-07-18 17:25 ` [Buildroot] [PATCH 06/20] system: move setting getty to the corresponding init systems Yann E. MORIN
2017-07-22 13:11   ` Arnout Vandecappelle
2017-07-22 19:57     ` Thomas Petazzoni
2017-07-22 21:13       ` Arnout Vandecappelle
2017-07-22 20:34   ` Thomas Petazzoni
2017-07-18 17:25 ` [Buildroot] [PATCH 07/20] system: move remounting / " Yann E. MORIN
2017-07-22 13:16   ` Arnout Vandecappelle
2017-07-22 20:36   ` Thomas Petazzoni
2017-07-18 17:25 ` [Buildroot] [PATCH 08/20] system: with no init system, only allow custom skeleton Yann E. MORIN
2017-07-22 13:28   ` Arnout Vandecappelle
2017-07-22 13:53     ` Yann E. MORIN
2017-07-22 21:18       ` Arnout Vandecappelle
2017-07-22 22:12         ` Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 09/20] package/skeleton: drop dependency on host-mkpasswd Yann E. MORIN
2017-07-22 21:24   ` Arnout Vandecappelle
2017-07-22 22:32     ` Yann E. MORIN [this message]
2017-07-18 17:25 ` [Buildroot] [PATCH 10/20] package/skeleton: select it rather than default to y Yann E. MORIN
2017-07-22 21:47   ` Arnout Vandecappelle
2017-07-18 17:25 ` [Buildroot] [PATCH 11/20] package/skeleton: split out into skeleton-custom Yann E. MORIN
2017-07-22 22:31   ` Arnout Vandecappelle
2017-07-22 22:38     ` Arnout Vandecappelle
2017-07-23  9:45       ` Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 12/20] package/skeleton: split out into skeleton-common Yann E. MORIN
2017-07-22 23:06   ` Arnout Vandecappelle
2017-07-23  9:48     ` Yann E. MORIN
2017-07-23 20:32       ` Arnout Vandecappelle
2017-07-24  7:19         ` Thomas Petazzoni
2017-07-24 15:19           ` Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 13/20] package/skeleton: make it a virtual package Yann E. MORIN
2017-07-22 23:36   ` Arnout Vandecappelle
2017-07-23 10:13     ` Yann E. MORIN
2017-07-23 20:48       ` Arnout Vandecappelle
2017-07-18 17:25 ` [Buildroot] [PATCH 14/20] package/skeleton-common: simplify staging install Yann E. MORIN
2017-07-22 23:38   ` Arnout Vandecappelle
2017-07-18 17:25 ` [Buildroot] [PATCH 15/20] package/skeleton: introduce sysv- and systemd-specific skeletons Yann E. MORIN
2017-07-22 23:49   ` Arnout Vandecappelle
2017-07-23 10:15     ` Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 16/20] system: separate sysv and systemd parts of the skeleton Yann E. MORIN
2017-07-23  0:08   ` Arnout Vandecappelle
2017-07-23  0:13     ` Arnout Vandecappelle
2017-07-23 10:31       ` Yann E. MORIN
2017-07-23 10:24     ` Yann E. MORIN
2017-07-23 13:32       ` Arnout Vandecappelle
2017-07-23 13:39         ` Arnout Vandecappelle
2017-07-23 13:41           ` Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 17/20] sytem: no-init systems may use our default, common skeleton Yann E. MORIN
2017-07-23  0:18   ` Arnout Vandecappelle
2017-07-23 10:37     ` Yann E. MORIN
2017-07-18 17:25 ` [Buildroot] [PATCH 18/20] fs: add pre- and post-command hooks Yann E. MORIN
2017-07-23 13:42   ` Arnout Vandecappelle
2017-07-23 14:17     ` Yann E. MORIN
2017-07-23 21:51       ` Arnout Vandecappelle
2017-07-24 16:01         ` Yann E. MORIN
2017-07-24 22:23           ` Arnout Vandecappelle
2017-07-18 17:25 ` [Buildroot] [PATCH 19/20] system: make systemd work on a read-only rootfs Yann E. MORIN
2017-07-23 22:18   ` Arnout Vandecappelle
2017-07-24 15:45     ` Yann E. MORIN
2017-07-24 22:44       ` Arnout Vandecappelle
2017-07-25 16:07         ` Yann E. MORIN
2017-07-25 22:24           ` Arnout Vandecappelle
2017-07-18 17:25 ` [Buildroot] [PATCH 20/20] support/testing: add runtime testing for init systems Yann E. MORIN
2017-07-22 14:32   ` Arnout Vandecappelle
2017-07-22 14:45     ` Yann E. MORIN
2017-07-22 19:30       ` Thomas Petazzoni
2017-07-22 19:53       ` Arnout Vandecappelle
2017-07-22 20:10         ` Thomas Petazzoni
2017-07-22 22:50           ` Yann E. MORIN
2017-07-23  7:58             ` Thomas Petazzoni
2017-07-23  9:26               ` Yann E. MORIN
2017-07-23 18:13                 ` [Buildroot] TestIso9660GrubExternal and TestIso9660GrubInternal failing Ricardo Martincoski
2017-07-23 20:02                   ` Yann E. MORIN
2017-07-23 20:28                     ` Yann E. MORIN
2017-07-23 20:39                     ` Yann E. MORIN
2017-07-24  7:13                   ` Thomas Petazzoni
2017-07-24 11:07                     ` Ricardo Martincoski
2017-07-24 15:18                     ` Yann E. MORIN
2017-07-24 15:20   ` [Buildroot] [PATCH 20/20] support/testing: add runtime testing for init systems Andrey Smirnov
2017-07-24 15:50     ` Yann E. MORIN
2017-07-19 20:14 ` [Buildroot] [PATCH 00/20] system: properly handle systemd as init system Andrey Yurovsky
2017-07-19 20:53   ` Thomas Petazzoni
2017-07-19 22:17     ` Andrey Yurovsky
2017-07-20  7:32       ` Thomas Petazzoni
2017-07-21 22:15         ` Marcus Hoffmann
2017-07-28 20:41           ` Marcus Hoffmann
2017-07-28 20:54             ` Thomas Petazzoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170722223259.GJ9929@scaer \
    --to=yann.morin.1998@free.fr \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox