* [Buildroot] [PATCH 0/3] Initial support for NXP iMX8 (imx8mq-evk)
@ 2018-02-18 13:28 Erik Larsson
2018-02-18 13:28 ` [Buildroot] [PATCH 1/3] imx-mkimage: new package Erik Larsson
` (2 more replies)
0 siblings, 3 replies; 18+ messages in thread
From: Erik Larsson @ 2018-02-18 13:28 UTC (permalink / raw)
To: buildroot
This series provides initial support for NXP iMX8.
This series of patches are tested against NXP imx8mq-evk.
It only handles basic support for iIMX8, currently no
support for GPU, VPU and other HW features. This series
makes it possible to build a minimal system for imx8mq-evk.
Erik Larsson (3):
imx-mkimage: new package
imx-atf: new package
add support for iMX8MQ-evk board
.../common/imx/genimage.cfg.template_imx8 | 40 ++
board/freescale/common/imx/post-image.sh | 33 +-
board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++
configs/freescale_imx8mqevk_defconfig | 35 ++
package/Config.in.host | 1 +
package/freescale-imx/Config.in | 8 +-
package/freescale-imx/firmware-imx/Config.in | 2 +-
package/freescale-imx/firmware-imx/firmware-imx.mk | 8 +
package/freescale-imx/imx-atf/Config.in | 5 +
package/freescale-imx/imx-atf/imx-atf.hash | 3 +
package/freescale-imx/imx-atf/imx-atf.mk | 23 +
.../0001-make-bl33-read-env-variables.patch | 37 ++
package/freescale-imx/imx-mkimage/Config.in.host | 5 +
package/freescale-imx/imx-mkimage/imx-mkimage.hash | 3 +
package/freescale-imx/imx-mkimage/imx-mkimage.mk | 23 +
15 files changed, 846 insertions(+), 5 deletions(-)
create mode 100644 board/freescale/common/imx/genimage.cfg.template_imx8
create mode 100644 board/freescale/imx8mqevk/linux-4.9.config
create mode 100644 configs/freescale_imx8mqevk_defconfig
create mode 100644 package/freescale-imx/imx-atf/Config.in
create mode 100644 package/freescale-imx/imx-atf/imx-atf.hash
create mode 100644 package/freescale-imx/imx-atf/imx-atf.mk
create mode 100644 package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch
create mode 100644 package/freescale-imx/imx-mkimage/Config.in.host
create mode 100644 package/freescale-imx/imx-mkimage/imx-mkimage.hash
create mode 100644 package/freescale-imx/imx-mkimage/imx-mkimage.mk
--
2.7.4
^ permalink raw reply [flat|nested] 18+ messages in thread* [Buildroot] [PATCH 1/3] imx-mkimage: new package 2018-02-18 13:28 [Buildroot] [PATCH 0/3] Initial support for NXP iMX8 (imx8mq-evk) Erik Larsson @ 2018-02-18 13:28 ` Erik Larsson 2018-02-18 14:51 ` Thomas Petazzoni 2018-02-19 10:00 ` Marcus Folkesson 2018-02-18 13:28 ` [Buildroot] [PATCH 2/3] imx-atf: " Erik Larsson 2018-02-18 13:28 ` [Buildroot] [PATCH 3/3] add support for iMX8MQ-evk board Erik Larsson 2 siblings, 2 replies; 18+ messages in thread From: Erik Larsson @ 2018-02-18 13:28 UTC (permalink / raw) To: buildroot Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> --- package/Config.in.host | 1 + .../0001-make-bl33-read-env-variables.patch | 37 ++++++++++++++++++++++ package/freescale-imx/imx-mkimage/Config.in.host | 5 +++ package/freescale-imx/imx-mkimage/imx-mkimage.hash | 3 ++ package/freescale-imx/imx-mkimage/imx-mkimage.mk | 23 ++++++++++++++ 5 files changed, 69 insertions(+) create mode 100644 package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch create mode 100644 package/freescale-imx/imx-mkimage/Config.in.host create mode 100644 package/freescale-imx/imx-mkimage/imx-mkimage.hash create mode 100644 package/freescale-imx/imx-mkimage/imx-mkimage.mk diff --git a/package/Config.in.host b/package/Config.in.host index 199a8e9..b1cfa75 100644 --- a/package/Config.in.host +++ b/package/Config.in.host @@ -15,6 +15,7 @@ menu "Host utilities" source "package/e2fsprogs/Config.in.host" source "package/e2tools/Config.in.host" source "package/faketime/Config.in.host" + source "package/freescale-imx/imx-mkimage/Config.in.host" source "package/fwup/Config.in.host" source "package/genext2fs/Config.in.host" source "package/genimage/Config.in.host" diff --git a/package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch b/package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch new file mode 100644 index 0000000..490eb05 --- /dev/null +++ b/package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch @@ -0,0 +1,37 @@ +From 5ca549356ef889286c12b4d736d9026efafb8fff Mon Sep 17 00:00:00 2001 +From: Erik Larsson <erik.larsson@combitech.se> +Date: Mon, 29 Jan 2018 08:00:57 +0100 +Subject: [PATCH] Add support for overriding BL32 and BL33 not only BL31 + +Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> +Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com> +Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> +--- + iMX8M/mkimage_fit_atf.sh | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/iMX8M/mkimage_fit_atf.sh b/iMX8M/mkimage_fit_atf.sh +index 3a3bd10..95a11eb 100755 +--- a/iMX8M/mkimage_fit_atf.sh ++++ b/iMX8M/mkimage_fit_atf.sh +@@ -15,7 +15,7 @@ else + ls -lct bl31.bin | awk '{print $5}' >&2 + fi + +-BL32="tee.bin" ++[ -z "$BL32" ] && BL32="tee.bin" + + if [ ! -f $BL32 ]; then + BL32=/dev/null +@@ -25,7 +25,7 @@ else + ls -lct tee.bin | awk '{print $5}' >&2 + fi + +-BL33="u-boot-nodtb.bin" ++[ -z "$BL33" ] && BL33="u-boot-nodtb.bin" + + if [ ! -f $BL33 ]; then + echo "ERROR: $BL33 file NOT found" >&2 +-- +2.7.4 + diff --git a/package/freescale-imx/imx-mkimage/Config.in.host b/package/freescale-imx/imx-mkimage/Config.in.host new file mode 100644 index 0000000..3cf0966 --- /dev/null +++ b/package/freescale-imx/imx-mkimage/Config.in.host @@ -0,0 +1,5 @@ +config BR2_PACKAGE_HOST_IMX_MKIMAGE + bool "host imx-mkimage" + help + imx-mkimage is used to combine input images and generate + final boot image with appropriate IVT set. diff --git a/package/freescale-imx/imx-mkimage/imx-mkimage.hash b/package/freescale-imx/imx-mkimage/imx-mkimage.hash new file mode 100644 index 0000000..08d31ce --- /dev/null +++ b/package/freescale-imx/imx-mkimage/imx-mkimage.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 4ddb144520001c33baa24493f68ef2ea9434ac36bf3ae223f78d7ec581aa484c imx-mkimage-imx_4.9.51_imx8m_beta.tar.gz +sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c iMX8dv/COPYING diff --git a/package/freescale-imx/imx-mkimage/imx-mkimage.mk b/package/freescale-imx/imx-mkimage/imx-mkimage.mk new file mode 100644 index 0000000..a5b1f93 --- /dev/null +++ b/package/freescale-imx/imx-mkimage/imx-mkimage.mk @@ -0,0 +1,23 @@ +################################################################################ +# +# imx-mkimage +# +################################################################################ + +IMX_MKIMAGE_VERSION = imx_4.9.51_imx8m_beta +IMX_MKIMAGE_SITE = https://source.codeaurora.org/external/imx/imx-mkimage +IMX_MKIMAGE_SITE_METHOD = git +IMX_MKIMAGE_LICENSE = GPL-2.0 +IMX_MKIMAGE_LICENSE_FILES = iMX8dv/COPYING + +define HOST_IMX_MKIMAGE_BUILD_CMDS + $(MAKE) -C $(@D)/iMX8M -f soc.mak mkimage_imx8 +endef + +define HOST_IMX_MKIMAGE_INSTALL_CMDS + mkdir -p $(HOST_DIR)/bin + $(INSTALL) -m 755 $(@D)/iMX8M/mkimage_imx8 $(HOST_DIR)/bin + $(INSTALL) -m 755 $(@D)/iMX8M/mkimage_fit_atf.sh $(HOST_DIR)/bin +endef + +$(eval $(host-generic-package)) -- 2.7.4 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 1/3] imx-mkimage: new package 2018-02-18 13:28 ` [Buildroot] [PATCH 1/3] imx-mkimage: new package Erik Larsson @ 2018-02-18 14:51 ` Thomas Petazzoni 2018-02-19 5:43 ` Erik Larsson 2018-02-19 16:44 ` Gary Bisson 2018-02-19 10:00 ` Marcus Folkesson 1 sibling, 2 replies; 18+ messages in thread From: Thomas Petazzoni @ 2018-02-18 14:51 UTC (permalink / raw) To: buildroot Hello, Thanks for this contribution! On Sun, 18 Feb 2018 14:28:29 +0100, Erik Larsson wrote: > Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> > --- > package/Config.in.host | 1 + > .../0001-make-bl33-read-env-variables.patch | 37 ++++++++++++++++++++++ > package/freescale-imx/imx-mkimage/Config.in.host | 5 +++ > package/freescale-imx/imx-mkimage/imx-mkimage.hash | 3 ++ > package/freescale-imx/imx-mkimage/imx-mkimage.mk | 23 ++++++++++++++ > 5 files changed, 69 insertions(+) > create mode 100644 package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch > create mode 100644 package/freescale-imx/imx-mkimage/Config.in.host > create mode 100644 package/freescale-imx/imx-mkimage/imx-mkimage.hash > create mode 100644 package/freescale-imx/imx-mkimage/imx-mkimage.mk > > diff --git a/package/Config.in.host b/package/Config.in.host > index 199a8e9..b1cfa75 100644 > --- a/package/Config.in.host > +++ b/package/Config.in.host > @@ -15,6 +15,7 @@ menu "Host utilities" > source "package/e2fsprogs/Config.in.host" > source "package/e2tools/Config.in.host" > source "package/faketime/Config.in.host" > + source "package/freescale-imx/imx-mkimage/Config.in.host" I'm not sure this package needs to be under package/freescale-imx/. This sub-directory was initially created to share the FREESCALE_IMX_SITE and FREESCALE_IMX_EXTRACT_HELPER definitions, but you don't use them. > diff --git a/package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch b/package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch > new file mode 100644 > index 0000000..490eb05 > --- /dev/null > +++ b/package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch > @@ -0,0 +1,37 @@ > +From 5ca549356ef889286c12b4d736d9026efafb8fff Mon Sep 17 00:00:00 2001 > +From: Erik Larsson <erik.larsson@combitech.se> > +Date: Mon, 29 Jan 2018 08:00:57 +0100 > +Subject: [PATCH] Add support for overriding BL32 and BL33 not only BL31 > + > +Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> > +Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com> > +Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> What is the upstream status of this patch ? > diff --git a/package/freescale-imx/imx-mkimage/Config.in.host b/package/freescale-imx/imx-mkimage/Config.in.host > new file mode 100644 > index 0000000..3cf0966 > --- /dev/null > +++ b/package/freescale-imx/imx-mkimage/Config.in.host > @@ -0,0 +1,5 @@ > +config BR2_PACKAGE_HOST_IMX_MKIMAGE > + bool "host imx-mkimage" > + help > + imx-mkimage is used to combine input images and generate > + final boot image with appropriate IVT set. We like to have a blank line, and then the URL of the upstream project main page. Here, https://source.codeaurora.org/external/imx/imx-mkimage might be enough, unless there is a better page. > diff --git a/package/freescale-imx/imx-mkimage/imx-mkimage.mk b/package/freescale-imx/imx-mkimage/imx-mkimage.mk > new file mode 100644 > index 0000000..a5b1f93 > --- /dev/null > +++ b/package/freescale-imx/imx-mkimage/imx-mkimage.mk > @@ -0,0 +1,23 @@ > +################################################################################ > +# > +# imx-mkimage > +# > +################################################################################ > + > +IMX_MKIMAGE_VERSION = imx_4.9.51_imx8m_beta > +IMX_MKIMAGE_SITE = https://source.codeaurora.org/external/imx/imx-mkimage > +IMX_MKIMAGE_SITE_METHOD = git > +IMX_MKIMAGE_LICENSE = GPL-2.0 > +IMX_MKIMAGE_LICENSE_FILES = iMX8dv/COPYING > + > +define HOST_IMX_MKIMAGE_BUILD_CMDS > + $(MAKE) -C $(@D)/iMX8M -f soc.mak mkimage_imx8 Why are you building just the tool in iMX8M ? There is also one in src/ and in iMX8dv. What are the differences ? Should we build/install all of them ? Conditionally ? > +define HOST_IMX_MKIMAGE_INSTALL_CMDS > + mkdir -p $(HOST_DIR)/bin This line is not needed... if... > + $(INSTALL) -m 755 $(@D)/iMX8M/mkimage_imx8 $(HOST_DIR)/bin > + $(INSTALL) -m 755 $(@D)/iMX8M/mkimage_fit_atf.sh $(HOST_DIR)/bin You replace those lines by: $(INSTALL) -D -m 755 $(@D)/iMX8M/mkimage_imx8 $(HOST_DIR)/bin/mkimage_imx8 $(INSTALL) -D -m 755 $(@D)/iMX8M/mkimage_fit_atf.sh $(HOST_DIR)/bin/mkimage_fit_atf.sh Best regards, Thomas -- Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com ^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 1/3] imx-mkimage: new package 2018-02-18 14:51 ` Thomas Petazzoni @ 2018-02-19 5:43 ` Erik Larsson 2018-02-19 8:02 ` Thomas Petazzoni 2018-02-19 16:44 ` Gary Bisson 1 sibling, 1 reply; 18+ messages in thread From: Erik Larsson @ 2018-02-19 5:43 UTC (permalink / raw) To: buildroot Hello, 2018-02-18 15:51 GMT+01:00 Thomas Petazzoni <thomas.petazzoni@bootlin.com>: > Hello, > > Thanks for this contribution! > > On Sun, 18 Feb 2018 14:28:29 +0100, Erik Larsson wrote: > > Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> > > --- > > package/Config.in.host | 1 + > > .../0001-make-bl33-read-env-variables.patch | 37 > ++++++++++++++++++++++ > > package/freescale-imx/imx-mkimage/Config.in.host | 5 +++ > > package/freescale-imx/imx-mkimage/imx-mkimage.hash | 3 ++ > > package/freescale-imx/imx-mkimage/imx-mkimage.mk | 23 ++++++++++++++ > > 5 files changed, 69 insertions(+) > > create mode 100644 package/freescale-imx/imx- > mkimage/0001-make-bl33-read-env-variables.patch > > create mode 100644 package/freescale-imx/imx-mkimage/Config.in.host > > create mode 100644 package/freescale-imx/imx-mkimage/imx-mkimage.hash > > create mode 100644 package/freescale-imx/imx-mkimage/imx-mkimage.mk > > > > diff --git a/package/Config.in.host b/package/Config.in.host > > index 199a8e9..b1cfa75 100644 > > --- a/package/Config.in.host > > +++ b/package/Config.in.host > > @@ -15,6 +15,7 @@ menu "Host utilities" > > source "package/e2fsprogs/Config.in.host" > > source "package/e2tools/Config.in.host" > > source "package/faketime/Config.in.host" > > + source "package/freescale-imx/imx-mkimage/Config.in.host" > > I'm not sure this package needs to be under package/freescale-imx/. > This sub-directory was initially created to share the > FREESCALE_IMX_SITE and FREESCALE_IMX_EXTRACT_HELPER definitions, but > you don't use them. > Thanks for the information, I'll move it. > > diff --git a/package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch > b/package/freescale-imx/imx-mkimage/0001-make-bl33-read- > env-variables.patch > > new file mode 100644 > > index 0000000..490eb05 > > --- /dev/null > > +++ b/package/freescale-imx/imx-mkimage/0001-make-bl33-read- > env-variables.patch > > @@ -0,0 +1,37 @@ > > +From 5ca549356ef889286c12b4d736d9026efafb8fff Mon Sep 17 00:00:00 2001 > > +From: Erik Larsson <erik.larsson@combitech.se> > > +Date: Mon, 29 Jan 2018 08:00:57 +0100 > > +Subject: [PATCH] Add support for overriding BL32 and BL33 not only BL31 > > + > > +Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> > > +Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com> > > +Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> > > What is the upstream status of this patch ? > I've sent the patch to some of the developers, but still waiting for a reaction. > > diff --git a/package/freescale-imx/imx-mkimage/Config.in.host > b/package/freescale-imx/imx-mkimage/Config.in.host > > new file mode 100644 > > index 0000000..3cf0966 > > --- /dev/null > > +++ b/package/freescale-imx/imx-mkimage/Config.in.host > > @@ -0,0 +1,5 @@ > > +config BR2_PACKAGE_HOST_IMX_MKIMAGE > > + bool "host imx-mkimage" > > + help > > + imx-mkimage is used to combine input images and generate > > + final boot image with appropriate IVT set. > > We like to have a blank line, and then the URL of the upstream project > main page. Here, https://source.codeaurora.org/external/imx/imx-mkimage > might be enough, unless there is a better page. Ok! I'll fix that > > > diff --git a/package/freescale-imx/imx-mkimage/imx-mkimage.mk > b/package/freescale-imx/imx-mkimage/imx-mkimage.mk > > new file mode 100644 > > index 0000000..a5b1f93 > > --- /dev/null > > +++ b/package/freescale-imx/imx-mkimage/imx-mkimage.mk > > @@ -0,0 +1,23 @@ > > +########################################################### > ##################### > > +# > > +# imx-mkimage > > +# > > +########################################################### > ##################### > > + > > +IMX_MKIMAGE_VERSION = imx_4.9.51_imx8m_beta > > +IMX_MKIMAGE_SITE = https://source.codeaurora.org/ > external/imx/imx-mkimage > > +IMX_MKIMAGE_SITE_METHOD = git > > +IMX_MKIMAGE_LICENSE = GPL-2.0 > > +IMX_MKIMAGE_LICENSE_FILES = iMX8dv/COPYING > > + > > +define HOST_IMX_MKIMAGE_BUILD_CMDS > > + $(MAKE) -C $(@D)/iMX8M -f soc.mak mkimage_imx8 > > Why are you building just the tool in iMX8M ? There is also one in src/ > and in iMX8dv. What are the differences ? Should we build/install all > of them ? Conditionally ? > I'm currently only building for IMX8M because that's the only hardware I have access to. Preferably this should be conditional. Do you think I shall add it as a conditional option right away event though I can't test it against other hardware? > > +define HOST_IMX_MKIMAGE_INSTALL_CMDS > > + mkdir -p $(HOST_DIR)/bin > > This line is not needed... if... > Ok, I'll fix it! > > > + $(INSTALL) -m 755 $(@D)/iMX8M/mkimage_imx8 $(HOST_DIR)/bin > > + $(INSTALL) -m 755 $(@D)/iMX8M/mkimage_fit_atf.sh $(HOST_DIR)/bin > > You replace those lines by: > > $(INSTALL) -D -m 755 $(@D)/iMX8M/mkimage_imx8 > $(HOST_DIR)/bin/mkimage_imx8 > $(INSTALL) -D -m 755 $(@D)/iMX8M/mkimage_fit_atf.sh > $(HOST_DIR)/bin/mkimage_fit_atf.sh > > Best regards, > > Thomas > -- > Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) > Embedded Linux and Kernel engineering > http://bootlin.com > Thanks for your feedback! Best regards, Erik -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180219/648e79db/attachment.html> ^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 1/3] imx-mkimage: new package 2018-02-19 5:43 ` Erik Larsson @ 2018-02-19 8:02 ` Thomas Petazzoni 2018-02-19 8:05 ` Erik Larsson 0 siblings, 1 reply; 18+ messages in thread From: Thomas Petazzoni @ 2018-02-19 8:02 UTC (permalink / raw) To: buildroot Hello Erik, On Mon, 19 Feb 2018 06:43:15 +0100, Erik Larsson wrote: > > > diff --git a/package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch > > b/package/freescale-imx/imx-mkimage/0001-make-bl33-read- > > env-variables.patch > > > new file mode 100644 > > > index 0000000..490eb05 > > > --- /dev/null > > > +++ b/package/freescale-imx/imx-mkimage/0001-make-bl33-read- > > env-variables.patch > > > @@ -0,0 +1,37 @@ > > > +From 5ca549356ef889286c12b4d736d9026efafb8fff Mon Sep 17 00:00:00 2001 > > > +From: Erik Larsson <erik.larsson@combitech.se> > > > +Date: Mon, 29 Jan 2018 08:00:57 +0100 > > > +Subject: [PATCH] Add support for overriding BL32 and BL33 not only BL31 > > > + > > > +Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> > > > +Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com> > > > +Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> > > > > What is the upstream status of this patch ? > > > I've sent the patch to some of the developers, but still waiting for a > reaction. OK. Then who are those other people who have Signed-off on your patch ? > > Why are you building just the tool in iMX8M ? There is also one in src/ > > and in iMX8dv. What are the differences ? Should we build/install all > > of them ? Conditionally ? > > > I'm currently only building for IMX8M because that's the only hardware I > have access to. Preferably this should be conditional. Do you think I shall > add it as a conditional option right away event though I can't test it > against other hardware? It's fine to support just what you need today. However, it would be nice to explain it in the commit log and/or in a comment above those lines in the .mk file. Thanks a lot! Thomas -- Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com ^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 1/3] imx-mkimage: new package 2018-02-19 8:02 ` Thomas Petazzoni @ 2018-02-19 8:05 ` Erik Larsson 2018-02-19 9:55 ` Marcus Folkesson 0 siblings, 1 reply; 18+ messages in thread From: Erik Larsson @ 2018-02-19 8:05 UTC (permalink / raw) To: buildroot Hello, 2018-02-19 9:02 GMT+01:00 Thomas Petazzoni <thomas.petazzoni@bootlin.com>: > Hello Erik, > > On Mon, 19 Feb 2018 06:43:15 +0100, Erik Larsson wrote: > > > > > diff --git a/package/freescale-imx/imx-mkimage/0001-make-bl33-read- > env-variables.patch > > > b/package/freescale-imx/imx-mkimage/0001-make-bl33-read- > > > env-variables.patch > > > > new file mode 100644 > > > > index 0000000..490eb05 > > > > --- /dev/null > > > > +++ b/package/freescale-imx/imx-mkimage/0001-make-bl33-read- > > > env-variables.patch > > > > @@ -0,0 +1,37 @@ > > > > +From 5ca549356ef889286c12b4d736d9026efafb8fff Mon Sep 17 00:00:00 > 2001 > > > > +From: Erik Larsson <erik.larsson@combitech.se> > > > > +Date: Mon, 29 Jan 2018 08:00:57 +0100 > > > > +Subject: [PATCH] Add support for overriding BL32 and BL33 not only > BL31 > > > > + > > > > +Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> > > > > +Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com> > > > > +Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> > > > > > > What is the upstream status of this patch ? > > > > > I've sent the patch to some of the developers, but still waiting for a > > reaction. > > OK. Then who are those other people who have Signed-off on your patch ? > My colleagues :) > > > > Why are you building just the tool in iMX8M ? There is also one in src/ > > > and in iMX8dv. What are the differences ? Should we build/install all > > > of them ? Conditionally ? > > > > > I'm currently only building for IMX8M because that's the only hardware I > > have access to. Preferably this should be conditional. Do you think I > shall > > add it as a conditional option right away event though I can't test it > > against other hardware? > > It's fine to support just what you need today. However, it would be > nice to explain it in the commit log and/or in a comment above those > lines in the .mk file. > Okay, I will fix that. > > Thanks a lot! > > Thomas > -- > Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) > Embedded Linux and Kernel engineering > http://bootlin.com > Thanks, Erik -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180219/4f7c0a5a/attachment.html> ^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 1/3] imx-mkimage: new package 2018-02-19 8:05 ` Erik Larsson @ 2018-02-19 9:55 ` Marcus Folkesson 0 siblings, 0 replies; 18+ messages in thread From: Marcus Folkesson @ 2018-02-19 9:55 UTC (permalink / raw) To: buildroot Thomas, Erik, On Mon, Feb 19, 2018 at 09:05:09AM +0100, Erik Larsson wrote: > Hello, > > 2018-02-19 9:02 GMT+01:00 Thomas Petazzoni <thomas.petazzoni@bootlin.com>: > > > Hello Erik, > > > > On Mon, 19 Feb 2018 06:43:15 +0100, Erik Larsson wrote: > > > > > > > diff --git a/package/freescale-imx/imx-mkimage/0001-make-bl33-read- > > env-variables.patch > > > > b/package/freescale-imx/imx-mkimage/0001-make-bl33-read- > > > > env-variables.patch > > > > > new file mode 100644 > > > > > index 0000000..490eb05 > > > > > --- /dev/null > > > > > +++ b/package/freescale-imx/imx-mkimage/0001-make-bl33-read- > > > > env-variables.patch > > > > > @@ -0,0 +1,37 @@ > > > > > +From 5ca549356ef889286c12b4d736d9026efafb8fff Mon Sep 17 00:00:00 > > 2001 > > > > > +From: Erik Larsson <erik.larsson@combitech.se> > > > > > +Date: Mon, 29 Jan 2018 08:00:57 +0100 > > > > > +Subject: [PATCH] Add support for overriding BL32 and BL33 not only > > BL31 > > > > > + > > > > > +Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> > > > > > +Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com> > > > > > +Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> > > > > > > > > What is the upstream status of this patch ? > > > > > > > I've sent the patch to some of the developers, but still waiting for a > > > reaction. > > > > OK. Then who are those other people who have Signed-off on your patch ? > > > My colleagues :) Yep, we are fine with this. > > > > > > > Why are you building just the tool in iMX8M ? There is also one in src/ > > > > and in iMX8dv. What are the differences ? Should we build/install all > > > > of them ? Conditionally ? > > > > > > > I'm currently only building for IMX8M because that's the only hardware I > > > have access to. Preferably this should be conditional. Do you think I > > shall > > > add it as a conditional option right away event though I can't test it > > > against other hardware? > > > > It's fine to support just what you need today. However, it would be > > nice to explain it in the commit log and/or in a comment above those > > lines in the .mk file. > > > Okay, I will fix that. > > > > > Thanks a lot! > > > > Thomas > > -- > > Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) > > Embedded Linux and Kernel engineering > > http://bootlin.com > > > > Thanks, > Erik > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot Best regards Marcus Folkesson -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180219/a109dfed/attachment.asc> ^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 1/3] imx-mkimage: new package 2018-02-18 14:51 ` Thomas Petazzoni 2018-02-19 5:43 ` Erik Larsson @ 2018-02-19 16:44 ` Gary Bisson 2018-02-19 16:55 ` Thomas Petazzoni 1 sibling, 1 reply; 18+ messages in thread From: Gary Bisson @ 2018-02-19 16:44 UTC (permalink / raw) To: buildroot Hi Thomas, Erik, On Sun, Feb 18, 2018 at 03:51:00PM +0100, Thomas Petazzoni wrote: > Hello, > > Thanks for this contribution! > > On Sun, 18 Feb 2018 14:28:29 +0100, Erik Larsson wrote: > > Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> > > --- > > package/Config.in.host | 1 + > > .../0001-make-bl33-read-env-variables.patch | 37 ++++++++++++++++++++++ > > package/freescale-imx/imx-mkimage/Config.in.host | 5 +++ > > package/freescale-imx/imx-mkimage/imx-mkimage.hash | 3 ++ > > package/freescale-imx/imx-mkimage/imx-mkimage.mk | 23 ++++++++++++++ > > 5 files changed, 69 insertions(+) > > create mode 100644 package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch > > create mode 100644 package/freescale-imx/imx-mkimage/Config.in.host > > create mode 100644 package/freescale-imx/imx-mkimage/imx-mkimage.hash > > create mode 100644 package/freescale-imx/imx-mkimage/imx-mkimage.mk > > > > diff --git a/package/Config.in.host b/package/Config.in.host > > index 199a8e9..b1cfa75 100644 > > --- a/package/Config.in.host > > +++ b/package/Config.in.host > > @@ -15,6 +15,7 @@ menu "Host utilities" > > source "package/e2fsprogs/Config.in.host" > > source "package/e2tools/Config.in.host" > > source "package/faketime/Config.in.host" > > + source "package/freescale-imx/imx-mkimage/Config.in.host" > > I'm not sure this package needs to be under package/freescale-imx/. > This sub-directory was initially created to share the > FREESCALE_IMX_SITE and FREESCALE_IMX_EXTRACT_HELPER definitions, but > you don't use them. Actually there are plenty of packages in that folder that don't need the extract helper nor the site address. Would you like those moved out of it? (imx-kobs, imx-uuc, imx-vpuwrap etc..). As a user I find it convenient to have it all in one place but I'd understand moving them around. Another aspect of that folder is BR2_PACKAGE_FREESCALE_IMX_PLATFORM, although it is accessible at other places, which has an effect on which packages are available. > > diff --git a/package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch b/package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch > > new file mode 100644 > > index 0000000..490eb05 > > --- /dev/null > > +++ b/package/freescale-imx/imx-mkimage/0001-make-bl33-read-env-variables.patch > > @@ -0,0 +1,37 @@ > > +From 5ca549356ef889286c12b4d736d9026efafb8fff Mon Sep 17 00:00:00 2001 > > +From: Erik Larsson <erik.larsson@combitech.se> > > +Date: Mon, 29 Jan 2018 08:00:57 +0100 > > +Subject: [PATCH] Add support for overriding BL32 and BL33 not only BL31 > > + > > +Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> > > +Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com> > > +Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> > > What is the upstream status of this patch ? > > > diff --git a/package/freescale-imx/imx-mkimage/Config.in.host b/package/freescale-imx/imx-mkimage/Config.in.host > > new file mode 100644 > > index 0000000..3cf0966 > > --- /dev/null > > +++ b/package/freescale-imx/imx-mkimage/Config.in.host > > @@ -0,0 +1,5 @@ > > +config BR2_PACKAGE_HOST_IMX_MKIMAGE > > + bool "host imx-mkimage" > > + help > > + imx-mkimage is used to combine input images and generate > > + final boot image with appropriate IVT set. > > We like to have a blank line, and then the URL of the upstream project > main page. Here, https://source.codeaurora.org/external/imx/imx-mkimage > might be enough, unless there is a better page. > > > diff --git a/package/freescale-imx/imx-mkimage/imx-mkimage.mk b/package/freescale-imx/imx-mkimage/imx-mkimage.mk > > new file mode 100644 > > index 0000000..a5b1f93 > > --- /dev/null > > +++ b/package/freescale-imx/imx-mkimage/imx-mkimage.mk > > @@ -0,0 +1,23 @@ > > +################################################################################ > > +# > > +# imx-mkimage > > +# > > +################################################################################ > > + > > +IMX_MKIMAGE_VERSION = imx_4.9.51_imx8m_beta > > +IMX_MKIMAGE_SITE = https://source.codeaurora.org/external/imx/imx-mkimage > > +IMX_MKIMAGE_SITE_METHOD = git > > +IMX_MKIMAGE_LICENSE = GPL-2.0 > > +IMX_MKIMAGE_LICENSE_FILES = iMX8dv/COPYING > > + > > +define HOST_IMX_MKIMAGE_BUILD_CMDS > > + $(MAKE) -C $(@D)/iMX8M -f soc.mak mkimage_imx8 > > Why are you building just the tool in iMX8M ? There is also one in src/ > and in iMX8dv. What are the differences ? Should we build/install all > of them ? Conditionally ? That is where new BR2_PACKAGE_FREESCALE_IMX_PLATFORM values would be needed to separate iMX8M, iMX8QM and iMX8QX. As a FYI, iMX8dv was some sort of development version of i.MX8, this will not be supported moving forward, only the 3 families listed above. Regards, Gary ^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 1/3] imx-mkimage: new package 2018-02-19 16:44 ` Gary Bisson @ 2018-02-19 16:55 ` Thomas Petazzoni 0 siblings, 0 replies; 18+ messages in thread From: Thomas Petazzoni @ 2018-02-19 16:55 UTC (permalink / raw) To: buildroot Hello, On Mon, 19 Feb 2018 17:44:06 +0100, Gary Bisson wrote: > > I'm not sure this package needs to be under package/freescale-imx/. > > This sub-directory was initially created to share the > > FREESCALE_IMX_SITE and FREESCALE_IMX_EXTRACT_HELPER definitions, but > > you don't use them. > > Actually there are plenty of packages in that folder that don't need the > extract helper nor the site address. Would you like those moved out of > it? (imx-kobs, imx-uuc, imx-vpuwrap etc..). I don't have a very clear cut opinion about this. If they don't need to be in package/freescale-imx/, then in theory they should be outside yes. > Another aspect of that folder is BR2_PACKAGE_FREESCALE_IMX_PLATFORM, > although it is accessible at other places, which has an effect on which > packages are available. Yeah, but that's just Config.in values, which are available to all packages without problem. > > Why are you building just the tool in iMX8M ? There is also one in src/ > > and in iMX8dv. What are the differences ? Should we build/install all > > of them ? Conditionally ? > > That is where new BR2_PACKAGE_FREESCALE_IMX_PLATFORM values would be > needed to separate iMX8M, iMX8QM and iMX8QX. > > As a FYI, iMX8dv was some sort of development version of i.MX8, this > will not be supported moving forward, only the 3 families listed above. OK, thanks for the info! Best regards, Thomas -- Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com ^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 1/3] imx-mkimage: new package 2018-02-18 13:28 ` [Buildroot] [PATCH 1/3] imx-mkimage: new package Erik Larsson 2018-02-18 14:51 ` Thomas Petazzoni @ 2018-02-19 10:00 ` Marcus Folkesson 1 sibling, 0 replies; 18+ messages in thread From: Marcus Folkesson @ 2018-02-19 10:00 UTC (permalink / raw) To: buildroot On Sun, Feb 18, 2018 at 02:28:29PM +0100, Erik Larsson wrote: > Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Ask Christopher if he should be stated here as well. > +################################################################################ > +# > +# imx-mkimage > +# > +################################################################################ > + > +IMX_MKIMAGE_VERSION = imx_4.9.51_imx8m_beta > +IMX_MKIMAGE_SITE = https://source.codeaurora.org/external/imx/imx-mkimage > +IMX_MKIMAGE_SITE_METHOD = git > +IMX_MKIMAGE_LICENSE = GPL-2.0 This should actually be GPL-2.0+ as stated in several source files... despite our internal review. > +IMX_MKIMAGE_LICENSE_FILES = iMX8dv/COPYING > + > +define HOST_IMX_MKIMAGE_BUILD_CMDS > + $(MAKE) -C $(@D)/iMX8M -f soc.mak mkimage_imx8 > +endef > + > +define HOST_IMX_MKIMAGE_INSTALL_CMDS > + mkdir -p $(HOST_DIR)/bin > + $(INSTALL) -m 755 $(@D)/iMX8M/mkimage_imx8 $(HOST_DIR)/bin > + $(INSTALL) -m 755 $(@D)/iMX8M/mkimage_fit_atf.sh $(HOST_DIR)/bin > +endef > + > +$(eval $(host-generic-package)) > -- > 2.7.4 > > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot Best regards Marcus Folkesson -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180219/8638281e/attachment.asc> ^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 2/3] imx-atf: new package 2018-02-18 13:28 [Buildroot] [PATCH 0/3] Initial support for NXP iMX8 (imx8mq-evk) Erik Larsson 2018-02-18 13:28 ` [Buildroot] [PATCH 1/3] imx-mkimage: new package Erik Larsson @ 2018-02-18 13:28 ` Erik Larsson 2018-02-18 13:46 ` Baruch Siach 2018-02-18 13:28 ` [Buildroot] [PATCH 3/3] add support for iMX8MQ-evk board Erik Larsson 2 siblings, 1 reply; 18+ messages in thread From: Erik Larsson @ 2018-02-18 13:28 UTC (permalink / raw) To: buildroot Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> --- package/freescale-imx/Config.in | 4 ++++ package/freescale-imx/imx-atf/Config.in | 5 +++++ package/freescale-imx/imx-atf/imx-atf.hash | 3 +++ package/freescale-imx/imx-atf/imx-atf.mk | 23 +++++++++++++++++++++++ 4 files changed, 35 insertions(+) create mode 100644 package/freescale-imx/imx-atf/Config.in create mode 100644 package/freescale-imx/imx-atf/imx-atf.hash create mode 100644 package/freescale-imx/imx-atf/imx-atf.mk diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in index b5e5ab2..2535caa 100644 --- a/package/freescale-imx/Config.in +++ b/package/freescale-imx/Config.in @@ -88,4 +88,8 @@ source "package/freescale-imx/imx-gpu-viv/Config.in" source "package/freescale-imx/kernel-module-imx-gpu-viv/Config.in" endif +if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M + source "package/freescale-imx/imx-atf/Config.in" +endif + endif diff --git a/package/freescale-imx/imx-atf/Config.in b/package/freescale-imx/imx-atf/Config.in new file mode 100644 index 0000000..200203d --- /dev/null +++ b/package/freescale-imx/imx-atf/Config.in @@ -0,0 +1,5 @@ +config BR2_PACKAGE_IMX_ATF + bool "imx-atf" + help + ARM Trusted Firmware provides a reference implementation + of secure world software for `ARMv8-A` diff --git a/package/freescale-imx/imx-atf/imx-atf.hash b/package/freescale-imx/imx-atf/imx-atf.hash new file mode 100644 index 0000000..5b653a7 --- /dev/null +++ b/package/freescale-imx/imx-atf/imx-atf.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 aa5879af507df44b9981d75852e2a520612c6c5c43dc423480ca36b6deff5160 imx-atf-imx_4.9.51_imx8m_beta.tar.gz +sha256 487795b8023df866259fa159bab94706b747fb0d623b7913f1c4955c0ab5f164 license.rst diff --git a/package/freescale-imx/imx-atf/imx-atf.mk b/package/freescale-imx/imx-atf/imx-atf.mk new file mode 100644 index 0000000..f0aa988 --- /dev/null +++ b/package/freescale-imx/imx-atf/imx-atf.mk @@ -0,0 +1,23 @@ +################################################################################ +# +# imx-atf +# +################################################################################ + +IMX_ATF_VERSION = imx_4.9.51_imx8m_beta +IMX_ATF_SITE = https://source.codeaurora.org/external/imx/imx-atf +IMX_ATF_SITE_METHOD = git +IMX_AFT_LICENSE = BSD-3-Clause +IMX_AFT_LICESE_FILES = license.rst + +define IMX_ATF_BUILD_CMDS + $(TARGET_MAKE_ENV) \ + CROSS_COMPILE=$(TARGET_CROSS) \ + $(MAKE) -C $(@D) PLAT=imx8mq bl31 +endef + +define IMX_ATF_INSTALL_TARGET_CMDS + cp $(@D)/build/imx8mq/release/bl31.bin $(BINARIES_DIR)/imx-boot +endef + +$(eval $(generic-package)) -- 2.7.4 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 2/3] imx-atf: new package 2018-02-18 13:28 ` [Buildroot] [PATCH 2/3] imx-atf: " Erik Larsson @ 2018-02-18 13:46 ` Baruch Siach 2018-02-18 13:55 ` Erik Larsson 0 siblings, 1 reply; 18+ messages in thread From: Baruch Siach @ 2018-02-18 13:46 UTC (permalink / raw) To: buildroot Hi Erik, On Sun, Feb 18, 2018 at 02:28:30PM +0100, Erik Larsson wrote: > Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> > --- > package/freescale-imx/Config.in | 4 ++++ > package/freescale-imx/imx-atf/Config.in | 5 +++++ > package/freescale-imx/imx-atf/imx-atf.hash | 3 +++ > package/freescale-imx/imx-atf/imx-atf.mk | 23 +++++++++++++++++++++++ > 4 files changed, 35 insertions(+) > create mode 100644 package/freescale-imx/imx-atf/Config.in > create mode 100644 package/freescale-imx/imx-atf/imx-atf.hash > create mode 100644 package/freescale-imx/imx-atf/imx-atf.mk We have an arm-trusted-firmware already at boot/arm-trusted-firmware/. Any reason you can't use that? baruch -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il - ^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 2/3] imx-atf: new package 2018-02-18 13:46 ` Baruch Siach @ 2018-02-18 13:55 ` Erik Larsson 0 siblings, 0 replies; 18+ messages in thread From: Erik Larsson @ 2018-02-18 13:55 UTC (permalink / raw) To: buildroot Hi Baruch, 2018-02-18 14:46 GMT+01:00 Baruch Siach <baruch@tkos.co.il>: > Hi Erik, > > On Sun, Feb 18, 2018 at 02:28:30PM +0100, Erik Larsson wrote: > > Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> > > --- > > package/freescale-imx/Config.in | 4 ++++ > > package/freescale-imx/imx-atf/Config.in | 5 +++++ > > package/freescale-imx/imx-atf/imx-atf.hash | 3 +++ > > package/freescale-imx/imx-atf/imx-atf.mk | 23 +++++++++++++++++++++++ > > 4 files changed, 35 insertions(+) > > create mode 100644 package/freescale-imx/imx-atf/Config.in > > create mode 100644 package/freescale-imx/imx-atf/imx-atf.hash > > create mode 100644 package/freescale-imx/imx-atf/imx-atf.mk > > We have an arm-trusted-firmware already at boot/arm-trusted-firmware/. Any > reason you can't use that? > Sorry to say, but I completely missed that there already where an ATF-package. After a first glance there shouldn't be any reason not to use boot/arm-trusted-firmware. I will look into this. > > baruch > > -- > http://baruch.siach.name/blog/ ~. .~ Tk Open > Systems > =}------------------------------------------------ooO--U-- > Ooo------------{= > - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il - > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180218/06346e60/attachment.html> ^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 3/3] add support for iMX8MQ-evk board 2018-02-18 13:28 [Buildroot] [PATCH 0/3] Initial support for NXP iMX8 (imx8mq-evk) Erik Larsson 2018-02-18 13:28 ` [Buildroot] [PATCH 1/3] imx-mkimage: new package Erik Larsson 2018-02-18 13:28 ` [Buildroot] [PATCH 2/3] imx-atf: " Erik Larsson @ 2018-02-18 13:28 ` Erik Larsson 2018-02-18 14:47 ` Baruch Siach 2018-02-19 10:12 ` Marcus Folkesson 2 siblings, 2 replies; 18+ messages in thread From: Erik Larsson @ 2018-02-18 13:28 UTC (permalink / raw) To: buildroot Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> --- .../common/imx/genimage.cfg.template_imx8 | 40 ++ board/freescale/common/imx/post-image.sh | 33 +- board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++ configs/freescale_imx8mqevk_defconfig | 35 ++ package/freescale-imx/Config.in | 4 +- package/freescale-imx/firmware-imx/Config.in | 2 +- package/freescale-imx/firmware-imx/firmware-imx.mk | 8 + 7 files changed, 742 insertions(+), 5 deletions(-) create mode 100644 board/freescale/common/imx/genimage.cfg.template_imx8 create mode 100644 board/freescale/imx8mqevk/linux-4.9.config create mode 100644 configs/freescale_imx8mqevk_defconfig diff --git a/board/freescale/common/imx/genimage.cfg.template_imx8 b/board/freescale/common/imx/genimage.cfg.template_imx8 new file mode 100644 index 0000000..138beff --- /dev/null +++ b/board/freescale/common/imx/genimage.cfg.template_imx8 @@ -0,0 +1,40 @@ +# Minimal SD card image for the Freescale boards Template for SPL Boot +# +# We mimic the .sdcard Freescale's image format: +# * the SD card must have 33 kB free space at the beginning, +# * U-Boot is integrated into imx-boot-imx8mqevk-sd.bin and is dumped as is, +# * a FAT partition at offset 64MB is containing Image and DTB files +# * a single root filesystem partition is required (ext2, ext3 or ext4) +# + +image boot.vfat { + vfat { + files = { + %FILES% + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition imx-boot { + in-partition-table = "no" + image = "imx-boot-imx8mqevk-sd.bin" + offset = 33K + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 8M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext2" + } +} diff --git a/board/freescale/common/imx/post-image.sh b/board/freescale/common/imx/post-image.sh index b239743..e3082a3 100755 --- a/board/freescale/common/imx/post-image.sh +++ b/board/freescale/common/imx/post-image.sh @@ -7,10 +7,10 @@ # dtb_list() { - local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})" + local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([\/a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})" for dt in $DTB_LIST; do - echo -n "\"$dt.dtb\", " + echo -n "\"`basename $dt`.dtb\", " done } @@ -23,6 +23,8 @@ linux_image() { if grep -Eq "^BR2_LINUX_KERNEL_UIMAGE=y$" ${BR2_CONFIG}; then echo "\"uImage\"" + elif grep -Eq "^BR2_LINUX_KERNEL_IMAGE=y$" ${BR2_CONFIG}; then + echo "\"Image\"" else echo "\"zImage\"" fi @@ -30,19 +32,44 @@ linux_image() genimage_type() { - if grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" ${BR2_CONFIG}; then + if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then + echo "genimage.cfg.template_imx8" + elif grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" ${BR2_CONFIG}; then echo "genimage.cfg.template_spl" else echo "genimage.cfg.template" fi } +gen_imx8_boot() +{ + objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem_pad.bin + objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem_pad.bin + objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem_pad.bin + cat ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem_pad.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem_pad.bin > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_fw.bin + cat ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem_pad.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_dmem.bin > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_fw.bin + cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_fw.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin + rm -f ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_fw.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_fw.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem_pad.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem_pad.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem_pad.bin + + BL31=${BINARIES_DIR}/imx-boot/bl31.bin BL33=${BINARIES_DIR}/u-boot.bin mkimage_fit_atf.sh ${BINARIES_DIR}/fsl-imx8mq-evk.dtb > ${BINARIES_DIR}/imx-boot/u-boot.its + pushd ${BINARIES_DIR} + mkimage -E -p 0x3000 -f ${BINARIES_DIR}/imx-boot/u-boot.its ${BINARIES_DIR}/u-boot.itb + popd + rm -f ${BINARIES_DIR}/imx-boot/u-boot.its + + mkimage_imx8 -fit -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx-boot-imx8mqevk-sd.bin +} + main() { local FILES="$(dtb_list) $(linux_image)" local GENIMAGE_CFG="$(mktemp --suffix genimage.cfg)" local GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" + if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then + $(gen_imx8_boot) + fi + sed -e "s/%FILES%/${FILES}/" \ board/freescale/common/imx/$(genimage_type) > ${GENIMAGE_CFG} diff --git a/board/freescale/imx8mqevk/linux-4.9.config b/board/freescale/imx8mqevk/linux-4.9.config new file mode 100644 index 0000000..f6c32cd --- /dev/null +++ b/board/freescale/imx8mqevk/linux-4.9.config @@ -0,0 +1,625 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_AUDIT=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_USER_NS=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_JUMP_LABEL=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_ALPINE=y +CONFIG_ARCH_BCM_IPROC=y +CONFIG_ARCH_BERLIN=y +CONFIG_ARCH_EXYNOS=y +CONFIG_ARCH_LAYERSCAPE=y +CONFIG_ARCH_LG1K=y +CONFIG_ARCH_HISI=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_ARCH_MESON=y +CONFIG_ARCH_MVEBU=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_ARCH_SEATTLE=y +CONFIG_ARCH_RENESAS=y +CONFIG_ARCH_R8A7795=y +CONFIG_ARCH_R8A7796=y +CONFIG_ARCH_STRATIX10=y +CONFIG_ARCH_TEGRA=y +CONFIG_ARCH_SPRD=y +CONFIG_ARCH_THUNDER=y +CONFIG_ARCH_UNIPHIER=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VULCAN=y +CONFIG_ARCH_XGENE=y +CONFIG_ARCH_ZX=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_ARCH_FSL_IMX8QM=y +CONFIG_ARCH_FSL_IMX8QXP=y +CONFIG_ARCH_FSL_IMX8MQ=y +CONFIG_PCI=y +CONFIG_PCI_IOV=y +CONFIG_PCI_AARDVARK=y +CONFIG_PCI_IMX6=y +CONFIG_PCIE_RCAR=y +CONFIG_PCI_HOST_GENERIC=y +CONFIG_PCI_XGENE=y +CONFIG_PCI_HISI=y +CONFIG_ARM64_VA_BITS_48=y +CONFIG_SCHED_MC=y +CONFIG_PREEMPT=y +CONFIG_KSM=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_CMA=y +CONFIG_SECCOMP=y +CONFIG_KEXEC=y +CONFIG_XEN=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_COMPAT=y +CONFIG_PM_DEBUG=y +CONFIG_PM_TEST_SUSPEND=y +CONFIG_ARM_CPUIDLE=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y +CONFIG_CPU_FREQ_GOV_INTERACTIVE=y +CONFIG_CPUFREQ_DT=y +CONFIG_ARM_BIG_LITTLE_CPUFREQ=y +CONFIG_ARM_IMX8_CPUFREQ=y +CONFIG_ARM_IMX8MQ_CPUFREQ=y +CONFIG_ARM_SCPI_CPUFREQ=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IPV6=m +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_MANGLE=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +CONFIG_LLC2=y +CONFIG_BPF_JIT=y +CONFIG_CAN=y +CONFIG_CAN_FLEXCAN=y +CONFIG_BT=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y +CONFIG_BT_LEDS=y +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +CONFIG_BT_HCIUART_3WIRE=y +CONFIG_BT_HCIUART_BCM=y +CONFIG_BT_HCIUART_QCA=y +CONFIG_BT_HCIVHCI=y +CONFIG_CFG80211=y +CONFIG_MAC80211=y +CONFIG_MAC80211_LEDS=y +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=320 +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_RAM=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_SLRAM=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_GPMI_NAND=y +CONFIG_MTD_SPI_NOR=y +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set +CONFIG_SPI_FSL_QUADSPI=y +CONFIG_SPI_FSL_FLEXSPI=y +CONFIG_MTD_UBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NBD=m +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_VIRTIO_BLK=y +CONFIG_SENSORS_FXOS8700=y +CONFIG_SENSORS_FXAS2100X=y +CONFIG_SRAM=y +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_HISI_SAS=y +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_IMX=y +CONFIG_AHCI_CEVA=y +CONFIG_AHCI_MVEBU=y +CONFIG_AHCI_XGENE=y +CONFIG_AHCI_QORIQ=y +CONFIG_SATA_SIL24=y +CONFIG_SATA_RCAR=y +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y +CONFIG_NETDEVICES=y +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_TUN=y +CONFIG_VETH=m +CONFIG_VIRTIO_NET=y +CONFIG_AMD_XGBE=y +CONFIG_NET_XGENE=y +CONFIG_MACB=y +CONFIG_HNS_DSAF=y +CONFIG_HNS_ENET=y +CONFIG_E1000E=y +CONFIG_IGB=y +CONFIG_IGBVF=y +CONFIG_SKY2=y +CONFIG_RAVB=y +CONFIG_SMC91X=y +CONFIG_SMSC911X=y +CONFIG_STMMAC_ETH=m +CONFIG_AT803X_PHY=y +CONFIG_MICREL_PHY=y +CONFIG_REALTEK_PHY=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_ATH10K=y +CONFIG_ATH10K_PCI=y +CONFIG_ATH10K_AHB=y +CONFIG_ATH10K_DEBUGFS=y +CONFIG_BCMDHD_1363=y +CONFIG_BCMDHD_PCIE=y +CONFIG_RTL_CARDS=m +# CONFIG_WLAN_VENDOR_TI is not set +CONFIG_INPUT_POLLDEV=y +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_IMX_SC_PWRKEY=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_PM8941_PWRKEY=y +CONFIG_INPUT_HISI_POWERKEY=y +CONFIG_INPUT_MPL3115=y +CONFIG_INPUT_ISL29023=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_MT6577=y +CONFIG_SERIAL_8250_UNIPHIER=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_MESON=y +CONFIG_SERIAL_MESON_CONSOLE=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_TEGRA=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=11 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +CONFIG_SERIAL_XILINX_PS_UART=y +CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +CONFIG_SERIAL_MVEBU_UART=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_IMX=y +CONFIG_I2C_IMX_LPI2C=y +CONFIG_I2C_MESON=y +CONFIG_I2C_MV64XXX=y +CONFIG_I2C_QUP=y +CONFIG_I2C_TEGRA=y +CONFIG_I2C_UNIPHIER_F=y +CONFIG_I2C_RCAR=y +CONFIG_I2C_CROS_EC_TUNNEL=y +CONFIG_SPI=y +CONFIG_SPI_FSL_LPSPI=y +CONFIG_SPI_MESON_SPIFC=m +CONFIG_SPI_ORION=y +CONFIG_SPI_PL022=y +CONFIG_SPI_QUP=y +CONFIG_SPI_S3C64XX=y +CONFIG_SPI_SPIDEV=m +CONFIG_SPMI=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_PINCTRL_MAX77620=y +CONFIG_PINCTRL_MSM8916=y +CONFIG_PINCTRL_MSM8996=y +CONFIG_PINCTRL_QDF2XXX=y +CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_PL061=y +CONFIG_GPIO_RCAR=y +CONFIG_GPIO_XGENE=y +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_MAX77620=y +CONFIG_POWER_RESET_MSM=y +CONFIG_POWER_RESET_XGENE=y +CONFIG_POWER_RESET_SYSCON=y +CONFIG_BATTERY_BQ27XXX=y +CONFIG_SENSORS_ARM_SCPI=y +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_INA2XX=m +# CONFIG_MXC_MMA8451 is not set +CONFIG_THERMAL_WRITABLE_TRIPS=y +CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y +CONFIG_CPU_THERMAL=y +CONFIG_THERMAL_EMULATION=y +CONFIG_IMX8M_THERMAL=y +CONFIG_IMX_SC_THERMAL=y +CONFIG_DEVICE_THERMAL=y +CONFIG_EXYNOS_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_S3C2410_WATCHDOG=y +CONFIG_IMX2_WDT=y +CONFIG_IMX8_WDT=y +CONFIG_MESON_GXBB_WATCHDOG=m +CONFIG_MESON_WATCHDOG=m +CONFIG_RENESAS_WDT=y +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_I2C=y +CONFIG_MFD_HI655X_PMIC=y +CONFIG_MFD_MAX77620=y +CONFIG_MFD_SPMI_PMIC=y +CONFIG_MFD_SEC_CORE=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_HI655X=y +CONFIG_REGULATOR_MAX77620=y +CONFIG_REGULATOR_PFUZE100=y +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_QCOM_SMD_RPM=y +CONFIG_REGULATOR_QCOM_SPMI=y +CONFIG_REGULATOR_S2MPS11=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_MXC_CAPTURE=y +CONFIG_VIDEO_MX8_CAPTURE=y +CONFIG_GMSL_MAX9286=y +CONFIG_VIDEO_MXC_CSI_CAMERA=y +CONFIG_MXC_MIPI_CSI=y +CONFIG_MXC_CAMERA_OV5640_MIPI_V2=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_IMX_DPU_CORE=y +CONFIG_IMX_DCSS_CORE=y +CONFIG_DRM=y +CONFIG_DRM_NOUVEAU=m +CONFIG_DRM_VIVANTE=m +CONFIG_DRM_MSM=m +CONFIG_DRM_TEGRA=m +CONFIG_DRM_PANEL_SIMPLE=m +CONFIG_DRM_PANEL_RAYDIUM_RM67191=y +CONFIG_DRM_I2C_ADV7511=y +CONFIG_DRM_ITE_IT6263=y +CONFIG_DRM_IMX_PARALLEL_DISPLAY=y +CONFIG_DRM_IMX_TVE=y +CONFIG_DRM_IMX_LDB=y +CONFIG_DRM_IMX_HDMI=y +CONFIG_DRM_IMX_NWL_DSI=y +CONFIG_DRM_IMX_HDP=y +CONFIG_IMX_HDP_CEC=y +CONFIG_DRM_HISI_KIRIN=m +CONFIG_DRM_MXSFB=y +CONFIG_FB_IMX64=y +CONFIG_FB_IMX64_DEBUG=y +CONFIG_FB_ARMCLCD=y +CONFIG_FB_MXC_DISP_FRAMEWORK=y +CONFIG_FB_MX8_HDMI=y +CONFIG_BACKLIGHT_GENERIC=m +CONFIG_BACKLIGHT_LP855X=m +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_SOC=y +CONFIG_SND_SOC_FSL_ACM=y +CONFIG_SND_SOC_FSL_HIFI4=y +CONFIG_SND_IMX_SOC=y +CONFIG_SND_SOC_IMX_WM8960=y +CONFIG_SND_SOC_IMX_WM8524=y +CONFIG_SND_SOC_IMX_CS42888=y +CONFIG_SND_SOC_IMX_WM8962=y +CONFIG_SND_SOC_IMX_MQS=y +CONFIG_SND_SOC_IMX_SPDIF=y +CONFIG_SND_SOC_IMX_AMIX=y +CONFIG_SND_SOC_IMX_CDNHDMI=y +CONFIG_SND_SOC_SAMSUNG=y +CONFIG_SND_SOC_RCAR=y +CONFIG_SND_SOC_AK4613=y +CONFIG_HID_MULTITOUCH=y +CONFIG_USB=y +CONFIG_USB_OTG=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_TEGRA=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MSM=y +CONFIG_USB_EHCI_EXYNOS=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_EXYNOS=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_RENESAS_USBHS=m +CONFIG_USB_ACM=m +CONFIG_USB_STORAGE=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC2=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_ISP1760=y +CONFIG_USB_ISP1760_HOST_ROLE=y +CONFIG_USB_CDNS3=y +CONFIG_USB_CDNS3_GADGET=y +CONFIG_USB_CDNS3_HOST=y +CONFIG_USB_TEST=m +CONFIG_USB_EHSET_TEST_FIXTURE=y +CONFIG_USB_HSIC_USB3503=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_USB_GPIO_VBUS=y +CONFIG_USB_MXS_PHY=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=m +CONFIG_USB_CONFIGFS=y +CONFIG_USB_CONFIGFS_SERIAL=y +CONFIG_USB_CONFIGFS_ACM=y +CONFIG_USB_CONFIGFS_OBEX=y +CONFIG_USB_CONFIGFS_NCM=y +CONFIG_USB_CONFIGFS_ECM=y +CONFIG_USB_CONFIGFS_ECM_SUBSET=y +CONFIG_USB_CONFIGFS_RNDIS=y +CONFIG_USB_CONFIGFS_EEM=y +CONFIG_USB_CONFIGFS_MASS_STORAGE=y +CONFIG_FSL_UTP=y +CONFIG_USB_CONFIGFS_F_LB_SS=y +CONFIG_USB_CONFIGFS_F_FS=y +CONFIG_USB_CONFIGFS_F_UAC1=y +CONFIG_USB_CONFIGFS_F_UAC2=y +CONFIG_USB_CONFIGFS_F_MIDI=y +CONFIG_USB_CONFIGFS_F_HID=y +CONFIG_USB_ZERO=m +CONFIG_USB_AUDIO=m +CONFIG_GADGET_UAC1=y +CONFIG_USB_ETH=m +CONFIG_USB_ETH_EEM=y +CONFIG_USB_G_NCM=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_USB_CDC_COMPOSITE=m +CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=32 +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ACPI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y +# CONFIG_MMC_SDHCI_IPROC is not set +CONFIG_MMC_SPI=y +CONFIG_MMC_SDHI=y +CONFIG_MXC_MLB150=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y +CONFIG_LEDS_SYSCON=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_S5M=y +CONFIG_RTC_DRV_DS3232=y +CONFIG_RTC_DRV_EFI=y +CONFIG_RTC_DRV_S3C=y +CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_TEGRA=y +CONFIG_RTC_DRV_SNVS=y +CONFIG_RTC_DRV_IMX_SC=y +CONFIG_RTC_DRV_XGENE=y +CONFIG_DMADEVICES=y +CONFIG_FSL_EDMA_V3=y +CONFIG_IMX_SDMA=y +CONFIG_MXS_DMA=y +CONFIG_PL330_DMA=y +CONFIG_TEGRA20_APB_DMA=y +CONFIG_QCOM_BAM_DMA=y +CONFIG_QCOM_HIDMA_MGMT=y +CONFIG_QCOM_HIDMA=y +CONFIG_RCAR_DMAC=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_VIRTIO_MMIO=y +CONFIG_XEN_GNTDEV=y +CONFIG_XEN_GRANT_DEV_ALLOC=y +CONFIG_STAGING=y +CONFIG_STAGING_MEDIA=y +CONFIG_MEDIA_CEC=y +CONFIG_ION=y +CONFIG_ION_MXC=y +CONFIG_TYPEC_TCPM=y +CONFIG_TYPEC_TCPCI=y +CONFIG_COMMON_CLK_SCPI=y +CONFIG_COMMON_CLK_CS2000_CP=y +CONFIG_COMMON_CLK_S2MPS11=y +CONFIG_CLK_QORIQ=y +CONFIG_COMMON_CLK_QCOM=y +CONFIG_MSM_GCC_8916=y +CONFIG_MSM_MMCC_8996=y +CONFIG_HWSPINLOCK_QCOM=y +CONFIG_CLKSRC_IMX_SYS_CNT=y +CONFIG_MAILBOX=y +CONFIG_ARM_MHU=y +CONFIG_HI6220_MBOX=y +CONFIG_ARM_SMMU=y +CONFIG_ARCH_MXC_ARM64=y +CONFIG_QCOM_SMEM=y +CONFIG_QCOM_SMD=y +CONFIG_QCOM_SMD_RPM=y +CONFIG_ARCH_TEGRA_132_SOC=y +CONFIG_ARCH_TEGRA_210_SOC=y +CONFIG_EXTCON_PTN5150=y +CONFIG_IIO=y +CONFIG_EXYNOS_ADC=y +CONFIG_PWM=y +CONFIG_PWM_IMX=y +CONFIG_PWM_SAMSUNG=y +CONFIG_PWM_TEGRA=m +CONFIG_PHY_HI6220_USB=y +CONFIG_PHY_XGENE=y +CONFIG_PHY_TEGRA_XUSB=y +CONFIG_IMX8_DDR_PERF=y +CONFIG_NVMEM=y +CONFIG_NVMEM_IMX_OCOTP=y +CONFIG_NVMEM_IMX_SCU_OCOTP=y +CONFIG_ARM_SCPI_PROTOCOL=y +CONFIG_ACPI=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=m +CONFIG_VFAT_FS=y +CONFIG_HUGETLBFS=y +CONFIG_EFIVAR_FS=y +CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y +CONFIG_SQUASHFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_ROOT_NFS=y +CONFIG_9P_FS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_KVM=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_FTRACE is not set +CONFIG_MEMTEST=y +CONFIG_SECURITY=y +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_CHACHA20POLY1305=y +CONFIG_CRYPTO_ECHAINIV=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTS=y +CONFIG_CRYPTO_LRW=y +CONFIG_CRYPTO_XTS=y +CONFIG_CRYPTO_MD4=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_RMD128=y +CONFIG_CRYPTO_RMD160=y +CONFIG_CRYPTO_RMD256=y +CONFIG_CRYPTO_RMD320=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_SHA3=y +CONFIG_CRYPTO_TGR192=y +CONFIG_CRYPTO_WP512=y +CONFIG_CRYPTO_BLOWFISH=y +CONFIG_CRYPTO_CAMELLIA=y +CONFIG_CRYPTO_CAST5=y +CONFIG_CRYPTO_CAST6=y +CONFIG_CRYPTO_SERPENT=y +CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_CRYPTO_DEV_FSL_CAAM=y +CONFIG_ARM64_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM64_CE=y +CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +CONFIG_CRYPTO_CRC32_ARM64=y diff --git a/configs/freescale_imx8mqevk_defconfig b/configs/freescale_imx8mqevk_defconfig new file mode 100644 index 0000000..a2ec07e --- /dev/null +++ b/configs/freescale_imx8mqevk_defconfig @@ -0,0 +1,35 @@ +BR2_aarch64=y +BR2_ARM_FPU_VFPV3=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/linux-imx" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="imx_4.9.51_imx8m_beta" +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/imx8mqevk/linux-4.9.config" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-imx8mq-evk" +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_PACKAGE_IMX_ATF=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/uboot-imx" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="imx_v2017.03_4.9.51_imx8m_beta" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mq_evk" +BR2_TARGET_UBOOT_FORMAT_IMX=y +BR2_TARGET_UBOOT_SPL=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_IMX_MKIMAGE=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y +BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in index 2535caa..adda403 100644 --- a/package/freescale-imx/Config.in +++ b/package/freescale-imx/Config.in @@ -1,6 +1,6 @@ menuconfig BR2_PACKAGE_FREESCALE_IMX bool "Freescale i.MX libraries" - depends on BR2_arm + depends on BR2_arm || BR2_aarch64 help Those packages provide hardware acceleration for GPU or VPU, hardware optimization or some hardware tools for Freescale @@ -40,6 +40,8 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6UL config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX7 bool "imx7d/imx7ulp" +config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M + bool "imx8m" endchoice config BR2_PACKAGE_FREESCALE_IMX_PLATFORM diff --git a/package/freescale-imx/firmware-imx/Config.in b/package/freescale-imx/firmware-imx/Config.in index fca280a..56d5b80 100644 --- a/package/freescale-imx/firmware-imx/Config.in +++ b/package/freescale-imx/firmware-imx/Config.in @@ -1,6 +1,6 @@ config BR2_PACKAGE_FIRMWARE_IMX bool "firmware-imx" - depends on BR2_arm # Only relevant for i.MX + depends on BR2_arm || BR2_aarch64 # Only relevant for i.MX help Firmware blobs for the Freescale i.MX SoCs. diff --git a/package/freescale-imx/firmware-imx/firmware-imx.mk b/package/freescale-imx/firmware-imx/firmware-imx.mk index 630afca..040a088 100644 --- a/package/freescale-imx/firmware-imx/firmware-imx.mk +++ b/package/freescale-imx/firmware-imx/firmware-imx.mk @@ -18,6 +18,13 @@ define FIRMWARE_IMX_EXTRACT_CMDS $(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(FIRMWARE_IMX_SOURCE)) endef +ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y) +define FIRMWARE_IMX_INSTALL_TARGET_CMDS + mkdir -p $(BINARIES_DIR)/imx-boot + cp $(@D)/firmware/ddr/synopsys/lpddr4_pmu_train_*.bin $(BINARIES_DIR)/imx-boot + cp $(@D)/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(BINARIES_DIR)/imx-boot +endef +else define FIRMWARE_IMX_INSTALL_TARGET_CMDS mkdir -p $(TARGET_DIR)/lib/firmware/imx for blobdir in $(FIRMWARE_IMX_BLOBS); do \ @@ -27,5 +34,6 @@ define FIRMWARE_IMX_INSTALL_TARGET_CMDS mv $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw.nonrestricted \ $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw endef +endif $(eval $(generic-package)) -- 2.7.4 ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 3/3] add support for iMX8MQ-evk board 2018-02-18 13:28 ` [Buildroot] [PATCH 3/3] add support for iMX8MQ-evk board Erik Larsson @ 2018-02-18 14:47 ` Baruch Siach 2018-02-19 6:01 ` Erik Larsson 2018-02-19 10:12 ` Marcus Folkesson 1 sibling, 1 reply; 18+ messages in thread From: Baruch Siach @ 2018-02-18 14:47 UTC (permalink / raw) To: buildroot Hi Erik, On Sun, Feb 18, 2018 at 02:28:31PM +0100, Erik Larsson wrote: > +gen_imx8_boot() > +{ > + objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem_pad.bin > + objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem_pad.bin > + objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem_pad.bin > + cat ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem_pad.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem_pad.bin > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_fw.bin > + cat ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem_pad.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_dmem.bin > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_fw.bin > + cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_fw.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin > + rm -f ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_fw.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_fw.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem_pad.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem_pad.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem_pad.bin > + > + BL31=${BINARIES_DIR}/imx-boot/bl31.bin BL33=${BINARIES_DIR}/u-boot.bin mkimage_fit_atf.sh ${BINARIES_DIR}/fsl-imx8mq-evk.dtb > ${BINARIES_DIR}/imx-boot/u-boot.its > + pushd ${BINARIES_DIR} > + mkimage -E -p 0x3000 -f ${BINARIES_DIR}/imx-boot/u-boot.its ${BINARIES_DIR}/u-boot.itb > + popd > + rm -f ${BINARIES_DIR}/imx-boot/u-boot.its > + > + mkimage_imx8 -fit -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx-boot-imx8mqevk-sd.bin > +} Instead of reproducing the convoluted way of generating the i.MX8 boot image, can't you just copy the files into the iMX8M/ subdirectory of imx-mkimage, and run there 'make SOC=iMX8M flash_spl_uboot'? [...] > diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in > index 2535caa..adda403 100644 > --- a/package/freescale-imx/Config.in > +++ b/package/freescale-imx/Config.in > @@ -1,6 +1,6 @@ > menuconfig BR2_PACKAGE_FREESCALE_IMX > bool "Freescale i.MX libraries" > - depends on BR2_arm > + depends on BR2_arm || BR2_aarch64 > help > Those packages provide hardware acceleration for GPU or VPU, > hardware optimization or some hardware tools for Freescale > @@ -40,6 +40,8 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6UL > config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX7 > bool "imx7d/imx7ulp" > > +config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M > + bool "imx8m" > endchoice > > config BR2_PACKAGE_FREESCALE_IMX_PLATFORM > diff --git a/package/freescale-imx/firmware-imx/Config.in b/package/freescale-imx/firmware-imx/Config.in > index fca280a..56d5b80 100644 > --- a/package/freescale-imx/firmware-imx/Config.in > +++ b/package/freescale-imx/firmware-imx/Config.in > @@ -1,6 +1,6 @@ > config BR2_PACKAGE_FIRMWARE_IMX > bool "firmware-imx" > - depends on BR2_arm # Only relevant for i.MX > + depends on BR2_arm || BR2_aarch64 # Only relevant for i.MX > help > Firmware blobs for the Freescale i.MX SoCs. > > diff --git a/package/freescale-imx/firmware-imx/firmware-imx.mk b/package/freescale-imx/firmware-imx/firmware-imx.mk > index 630afca..040a088 100644 > --- a/package/freescale-imx/firmware-imx/firmware-imx.mk > +++ b/package/freescale-imx/firmware-imx/firmware-imx.mk > @@ -18,6 +18,13 @@ define FIRMWARE_IMX_EXTRACT_CMDS > $(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(FIRMWARE_IMX_SOURCE)) > endef > > +ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y) > +define FIRMWARE_IMX_INSTALL_TARGET_CMDS > + mkdir -p $(BINARIES_DIR)/imx-boot > + cp $(@D)/firmware/ddr/synopsys/lpddr4_pmu_train_*.bin $(BINARIES_DIR)/imx-boot > + cp $(@D)/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(BINARIES_DIR)/imx-boot > +endef > +else > define FIRMWARE_IMX_INSTALL_TARGET_CMDS > mkdir -p $(TARGET_DIR)/lib/firmware/imx > for blobdir in $(FIRMWARE_IMX_BLOBS); do \ > @@ -27,5 +34,6 @@ define FIRMWARE_IMX_INSTALL_TARGET_CMDS > mv $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw.nonrestricted \ > $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw > endef > +endif These changes should be in a separate patch to firmware-imx. baruch -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il - ^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 3/3] add support for iMX8MQ-evk board 2018-02-18 14:47 ` Baruch Siach @ 2018-02-19 6:01 ` Erik Larsson 2018-02-19 12:44 ` Baruch Siach 0 siblings, 1 reply; 18+ messages in thread From: Erik Larsson @ 2018-02-19 6:01 UTC (permalink / raw) To: buildroot Hello, 2018-02-18 15:47 GMT+01:00 Baruch Siach <baruch@tkos.co.il>: > Hi Erik, > > On Sun, Feb 18, 2018 at 02:28:31PM +0100, Erik Larsson wrote: > > +gen_imx8_boot() > > +{ > > + objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem.bin > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem_pad.bin > > + objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem.bin > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem_pad.bin > > + objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem.bin > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem_pad.bin > > + cat ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem_pad.bin > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem_pad.bin > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_fw.bin > > + cat ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem_pad.bin > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_dmem.bin > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_fw.bin > > + cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_fw.bin > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_fw.bin > > ${BINARIES_DIR}/u-boot-spl-ddr.bin > > + rm -f ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_fw.bin > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_fw.bin > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem_pad.bin > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem_pad.bin > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem_pad.bin > > + > > + BL31=${BINARIES_DIR}/imx-boot/bl31.bin > BL33=${BINARIES_DIR}/u-boot.bin mkimage_fit_atf.sh > ${BINARIES_DIR}/fsl-imx8mq-evk.dtb > ${BINARIES_DIR}/imx-boot/u-boot.its > > + pushd ${BINARIES_DIR} > > + mkimage -E -p 0x3000 -f ${BINARIES_DIR}/imx-boot/u-boot.its > ${BINARIES_DIR}/u-boot.itb > > + popd > > + rm -f ${BINARIES_DIR}/imx-boot/u-boot.its > > + > > + mkimage_imx8 -fit -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin > 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out > ${BINARIES_DIR}/imx-boot-imx8mqevk-sd.bin > > +} > > Instead of reproducing the convoluted way of generating the i.MX8 boot > image, > can't you just copy the files into the iMX8M/ subdirectory of imx-mkimage, > and > run there 'make SOC=iMX8M flash_spl_uboot'? > Yes this is pretty convoluted, just as you say. There are some issues with doing this in the imx-mkimage (at least I think so, please let me know if I'm wrong :) ). The main Makefile of imx-mkimage has a step called buildinfo which reads information from its git repository, in buildroot there are no git repository during build time. This can off course be fixed using a small patch in the packet. The other problem is that we need to have a way of selecting which file is used as BL33 in the mkimage_fit_aft.sh which is called from iMX8M/soc.mk. This can also be fixed with a packet patch, or we can simply copy our u-boot.bin and call it u-boot-nodtb.bin as mkimage_fit_atf.sh is expecting it to be called. Please let my know what you think! > [...] > > > diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/ > Config.in > > index 2535caa..adda403 100644 > > --- a/package/freescale-imx/Config.in > > +++ b/package/freescale-imx/Config.in > > @@ -1,6 +1,6 @@ > > menuconfig BR2_PACKAGE_FREESCALE_IMX > > bool "Freescale i.MX libraries" > > - depends on BR2_arm > > + depends on BR2_arm || BR2_aarch64 > > help > > Those packages provide hardware acceleration for GPU or VPU, > > hardware optimization or some hardware tools for Freescale > > @@ -40,6 +40,8 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6UL > > config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX7 > > bool "imx7d/imx7ulp" > > > > +config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M > > + bool "imx8m" > > endchoice > > > > config BR2_PACKAGE_FREESCALE_IMX_PLATFORM > > diff --git a/package/freescale-imx/firmware-imx/Config.in > b/package/freescale-imx/firmware-imx/Config.in > > index fca280a..56d5b80 100644 > > --- a/package/freescale-imx/firmware-imx/Config.in > > +++ b/package/freescale-imx/firmware-imx/Config.in > > @@ -1,6 +1,6 @@ > > config BR2_PACKAGE_FIRMWARE_IMX > > bool "firmware-imx" > > - depends on BR2_arm # Only relevant for i.MX > > + depends on BR2_arm || BR2_aarch64 # Only relevant for i.MX > > help > > Firmware blobs for the Freescale i.MX SoCs. > > > > diff --git a/package/freescale-imx/firmware-imx/firmware-imx.mk > b/package/freescale-imx/firmware-imx/firmware-imx.mk > > index 630afca..040a088 100644 > > --- a/package/freescale-imx/firmware-imx/firmware-imx.mk > > +++ b/package/freescale-imx/firmware-imx/firmware-imx.mk > > @@ -18,6 +18,13 @@ define FIRMWARE_IMX_EXTRACT_CMDS > > $(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(FIRMWARE_IMX_ > SOURCE)) > > endef > > > > +ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y) > > +define FIRMWARE_IMX_INSTALL_TARGET_CMDS > > + mkdir -p $(BINARIES_DIR)/imx-boot > > + cp $(@D)/firmware/ddr/synopsys/lpddr4_pmu_train_*.bin > $(BINARIES_DIR)/imx-boot > > + cp $(@D)/firmware/hdmi/cadence/signed_hdmi_imx8m.bin > $(BINARIES_DIR)/imx-boot > > +endef > > +else > > define FIRMWARE_IMX_INSTALL_TARGET_CMDS > > mkdir -p $(TARGET_DIR)/lib/firmware/imx > > for blobdir in $(FIRMWARE_IMX_BLOBS); do \ > > @@ -27,5 +34,6 @@ define FIRMWARE_IMX_INSTALL_TARGET_CMDS > > mv $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw.nonrestricted > \ > > $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw > > endef > > +endif > > These changes should be in a separate patch to firmware-imx. > Ok, I will fix that! > > baruch > > -- > http://baruch.siach.name/blog/ ~. .~ Tk Open > Systems > =}------------------------------------------------ooO--U-- > Ooo------------{= > - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il - > Erik -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180219/ecd58e84/attachment.html> ^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 3/3] add support for iMX8MQ-evk board 2018-02-19 6:01 ` Erik Larsson @ 2018-02-19 12:44 ` Baruch Siach 0 siblings, 0 replies; 18+ messages in thread From: Baruch Siach @ 2018-02-19 12:44 UTC (permalink / raw) To: buildroot Hi Erik, On Mon, Feb 19, 2018 at 07:01:54AM +0100, Erik Larsson wrote: > 2018-02-18 15:47 GMT+01:00 Baruch Siach <baruch@tkos.co.il>: > > On Sun, Feb 18, 2018 at 02:28:31PM +0100, Erik Larsson wrote: > > > +gen_imx8_boot() > > > +{ > > > + objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem.bin > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem_pad.bin > > > + objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem.bin > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem_pad.bin > > > + objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem.bin > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem_pad.bin > > > + cat ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem_pad.bin > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem_pad.bin > > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_fw.bin > > > + cat ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem_pad.bin > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_dmem.bin > > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_fw.bin > > > + cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_fw.bin > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_fw.bin > > > ${BINARIES_DIR}/u-boot-spl-ddr.bin > > > + rm -f ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_fw.bin > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_fw.bin > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_imem_pad.bin > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_1d_dmem_pad.bin > > ${BINARIES_DIR}/imx-boot/lpddr4_pmu_train_2d_imem_pad.bin > > > + > > > + BL31=${BINARIES_DIR}/imx-boot/bl31.bin > > BL33=${BINARIES_DIR}/u-boot.bin mkimage_fit_atf.sh > > ${BINARIES_DIR}/fsl-imx8mq-evk.dtb > ${BINARIES_DIR}/imx-boot/u-boot.its > > > + pushd ${BINARIES_DIR} > > > + mkimage -E -p 0x3000 -f ${BINARIES_DIR}/imx-boot/u-boot.its > > ${BINARIES_DIR}/u-boot.itb > > > + popd > > > + rm -f ${BINARIES_DIR}/imx-boot/u-boot.its > > > + > > > + mkimage_imx8 -fit -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin > > 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out > > ${BINARIES_DIR}/imx-boot-imx8mqevk-sd.bin > > > +} > > > > Instead of reproducing the convoluted way of generating the i.MX8 boot > > image, can't you just copy the files into the iMX8M/ subdirectory of > > imx-mkimage, and run there 'make SOC=iMX8M flash_spl_uboot'? > > > Yes this is pretty convoluted, just as you say. There are some issues with > doing this in the imx-mkimage (at least I think so, please let me know if > I'm wrong :) ). > The main Makefile of imx-mkimage has a step called buildinfo which reads > information from its git repository, in buildroot there are no git > repository during build time. This can off course be fixed using a small > patch in the packet. Yes. I think that patching the top-level Makefile is preferable. > The other problem is that we need to have a way of > selecting which file is used as BL33 in the mkimage_fit_aft.sh which is > called from iMX8M/soc.mk. This can also be fixed with a packet patch, or we > can simply copy our u-boot.bin and call it u-boot-nodtb.bin as > mkimage_fit_atf.sh is expecting it to be called. Renaming u-boot.bin to u-boot-nodtb.bin is a small price to pay for not having to duplicate the logic of iMX8M/soc.mak in Buildroot. This logic has changed in the recent past, and I don't think we want to chase the creative imagination of NXP engineers. Over at the U-Boot mailing list Fabio indicated[1] that imx-mkimage will merge into the U-Boot mkimage. So hopefully we can get rid of this mess at some point. [1] https://patchwork.ozlabs.org/patch/857974/#1843851 baruch -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il - ^ permalink raw reply [flat|nested] 18+ messages in thread
* [Buildroot] [PATCH 3/3] add support for iMX8MQ-evk board 2018-02-18 13:28 ` [Buildroot] [PATCH 3/3] add support for iMX8MQ-evk board Erik Larsson 2018-02-18 14:47 ` Baruch Siach @ 2018-02-19 10:12 ` Marcus Folkesson 1 sibling, 0 replies; 18+ messages in thread From: Marcus Folkesson @ 2018-02-19 10:12 UTC (permalink / raw) To: buildroot On Sun, Feb 18, 2018 at 02:28:31PM +0100, Erik Larsson wrote: > Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Ask Christopher if he want to be stated here as well. > --- > diff --git a/board/freescale/common/imx/post-image.sh b/board/freescale/common/imx/post-image.sh > index b239743..e3082a3 100755 > --- a/board/freescale/common/imx/post-image.sh > +++ b/board/freescale/common/imx/post-image.sh > @@ -7,10 +7,10 @@ > # > dtb_list() > { > - local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})" > + local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([\/a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})" Just a thought.. is ${BR2_LINUX_KERNEL_INTREE_DTS_NAME} available in postscripts? It would be nice if we could avoid this sed magic. I'm not in an environment that I can check this by myself. > > for dt in $DTB_LIST; do > - echo -n "\"$dt.dtb\", " > + echo -n "\"`basename $dt`.dtb\", " > done > } Best regards Marcus Folkesson -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180219/4d67c64f/attachment.asc> ^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2018-02-19 16:55 UTC | newest] Thread overview: 18+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-02-18 13:28 [Buildroot] [PATCH 0/3] Initial support for NXP iMX8 (imx8mq-evk) Erik Larsson 2018-02-18 13:28 ` [Buildroot] [PATCH 1/3] imx-mkimage: new package Erik Larsson 2018-02-18 14:51 ` Thomas Petazzoni 2018-02-19 5:43 ` Erik Larsson 2018-02-19 8:02 ` Thomas Petazzoni 2018-02-19 8:05 ` Erik Larsson 2018-02-19 9:55 ` Marcus Folkesson 2018-02-19 16:44 ` Gary Bisson 2018-02-19 16:55 ` Thomas Petazzoni 2018-02-19 10:00 ` Marcus Folkesson 2018-02-18 13:28 ` [Buildroot] [PATCH 2/3] imx-atf: " Erik Larsson 2018-02-18 13:46 ` Baruch Siach 2018-02-18 13:55 ` Erik Larsson 2018-02-18 13:28 ` [Buildroot] [PATCH 3/3] add support for iMX8MQ-evk board Erik Larsson 2018-02-18 14:47 ` Baruch Siach 2018-02-19 6:01 ` Erik Larsson 2018-02-19 12:44 ` Baruch Siach 2018-02-19 10:12 ` Marcus Folkesson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox