From: Changming Huang <jerry.huang@nxp.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 4/9] boot/arm-trusted-firmware: Add RCW support
Date: Wed, 20 Nov 2019 12:07:20 +0800 [thread overview]
Message-ID: <20191120040725.32207-5-jerry.huang@nxp.com> (raw)
In-Reply-To: <20191120040725.32207-1-jerry.huang@nxp.com>
NXP Layerscape platforms use RCW (Reset Configure Word) to
setup clocking and IO allocations and then launches the next stage of boot.
RCW needs ATF as well as uboot.
BR2_PACKAGE_HOST_RCW_BOOT_MODE is used to determine if ATF is used for RCW.
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
---
boot/arm-trusted-firmware/arm-trusted-firmware.mk | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
index 70d36fff73..6896d9a7aa 100644
--- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk
+++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
@@ -95,6 +95,15 @@ endif
ARM_TRUSTED_FIRMWARE_MAKE_TARGETS = all
+RCW_BOOT_MODE = $(call qstrip,$(BR2_PACKAGE_HOST_RCW_BOOT_MODE))
+ifneq ($(RCW_BOOT_MODE),)
+RCW_PATH = $(call qstrip,$(BR2_PACKAGE_HOST_RCW_BIN))
+RCW_FILE = $(lastword $(subst /, ,$(RCW_PATH)))
+ARM_TRUSTED_FIRMWARE_MAKE_OPTS += BOOT_MODE=$(RCW_BOOT_MODE) RCW=$(BINARIES_DIR)/$(RCW_FILE)
+ARM_TRUSTED_FIRMWARE_MAKE_TARGETS += pbl
+ARM_TRUSTED_FIRMWARE_DEPENDENCIES += host-rcw
+endif
+
ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP),y)
ARM_TRUSTED_FIRMWARE_MAKE_TARGETS += fip
ARM_TRUSTED_FIRMWARE_DEPENDENCIES += host-openssl
--
2.17.1
next prev parent reply other threads:[~2019-11-20 4:07 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-20 4:07 [Buildroot] [PATCH 0/9] new board ls1028ardb introduced Changming Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 1/9] package/rcw: upgrade the rcw version to LSDK-19.09 Changming Huang
2019-11-20 7:59 ` Thomas Petazzoni
2019-11-20 8:04 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:21 ` [Buildroot] " Michael Walle
2019-11-20 9:32 ` Thomas Petazzoni
2019-11-20 9:38 ` Matthew Weber
2019-11-20 9:45 ` Thomas Petazzoni
2019-11-20 9:51 ` [Buildroot] [External] " Matthew Weber
2019-11-20 9:57 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 10:00 ` [Buildroot] " Michael Walle
2019-11-20 10:23 ` Matthew Weber
2019-11-20 9:54 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 2/9] package/rcw: add target rcw binary support Changming Huang
2019-11-20 9:30 ` Matthew Weber
2019-11-20 4:07 ` [Buildroot] [PATCH 3/9] boot/arm-trusted-firmware: Add u-boot-dtb.bin support Changming Huang
2019-11-20 7:37 ` Sergey Matyukevich
2019-11-20 8:13 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:07 ` [Buildroot] " Thomas Petazzoni
2019-11-20 4:07 ` Changming Huang [this message]
2019-11-20 7:50 ` [Buildroot] [PATCH 4/9] boot/arm-trusted-firmware: Add RCW support Sergey Matyukevich
2019-11-20 8:45 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 8:02 ` Sergey Matyukevich
2019-11-21 8:37 ` Jerry Huang
2019-11-21 8:39 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 5/9] package/freescale-qoriq: new package directory Changming Huang
2019-11-20 8:57 ` Thomas Petazzoni
2019-11-20 4:07 ` [Buildroot] [PATCH 6/9] package/freescale-qoriq/cadence: new package Changming Huang
2019-11-20 9:13 ` Thomas Petazzoni
2019-11-20 9:30 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:36 ` Thomas Petazzoni
2019-11-20 9:47 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 7/9] package/rcw: Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO Changming Huang
2019-11-20 9:14 ` Thomas Petazzoni
2019-11-20 9:34 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:38 ` Thomas Petazzoni
2019-11-20 10:22 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 8/9] board/freescale/common/ls: Add standard post image script for Layerscape processors Changming Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 9/9] configs/freescale_ls1028ardb*: new board Changming Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191120040725.32207-5-jerry.huang@nxp.com \
--to=jerry.huang@nxp.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox