From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 1/9] package/rcw: upgrade the rcw version to LSDK-19.09
Date: Wed, 20 Nov 2019 08:59:44 +0100 [thread overview]
Message-ID: <20191120085944.78aed103@windsurf.home> (raw)
In-Reply-To: <20191120040725.32207-2-jerry.huang@nxp.com>
Hello Jerry,
First of all, thanks a lot for this patch series, it is very nice to
see NXP directly contributing to Buildroot some support for the LS1028
platform. See below one question about this patch.
On Wed, 20 Nov 2019 12:07:17 +0800
Changming Huang <jerry.huang@nxp.com> wrote:
> Change the RCW version to LSDK-19.09.
>
> Signed-off-by: Changming Huang <jerry.huang@nxp.com>
> ---
> package/rcw/rcw.hash | 3 +--
> package/rcw/rcw.mk | 2 +-
> 2 files changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/package/rcw/rcw.hash b/package/rcw/rcw.hash
> index 7de1ec659a..3fbb5d167f 100644
> --- a/package/rcw/rcw.hash
> +++ b/package/rcw/rcw.hash
> @@ -1,3 +1,2 @@
> # Locally calculated
> -sha256 1421ada9fec10b12ff21cd9ad82f0a835b191cb2dde80f03547764574b1346c3 rcw-LSDK-18.12.tar.gz
> -sha256 a531b3146425e592db17a51ff39c4801cb01fb4055ffdaada0572decc0655bcd LICENSE
Why are you removing the hash of the license file here ?
Best regards,
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2019-11-20 7:59 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-20 4:07 [Buildroot] [PATCH 0/9] new board ls1028ardb introduced Changming Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 1/9] package/rcw: upgrade the rcw version to LSDK-19.09 Changming Huang
2019-11-20 7:59 ` Thomas Petazzoni [this message]
2019-11-20 8:04 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:21 ` [Buildroot] " Michael Walle
2019-11-20 9:32 ` Thomas Petazzoni
2019-11-20 9:38 ` Matthew Weber
2019-11-20 9:45 ` Thomas Petazzoni
2019-11-20 9:51 ` [Buildroot] [External] " Matthew Weber
2019-11-20 9:57 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 10:00 ` [Buildroot] " Michael Walle
2019-11-20 10:23 ` Matthew Weber
2019-11-20 9:54 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 2/9] package/rcw: add target rcw binary support Changming Huang
2019-11-20 9:30 ` Matthew Weber
2019-11-20 4:07 ` [Buildroot] [PATCH 3/9] boot/arm-trusted-firmware: Add u-boot-dtb.bin support Changming Huang
2019-11-20 7:37 ` Sergey Matyukevich
2019-11-20 8:13 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:07 ` [Buildroot] " Thomas Petazzoni
2019-11-20 4:07 ` [Buildroot] [PATCH 4/9] boot/arm-trusted-firmware: Add RCW support Changming Huang
2019-11-20 7:50 ` Sergey Matyukevich
2019-11-20 8:45 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 8:02 ` Sergey Matyukevich
2019-11-21 8:37 ` Jerry Huang
2019-11-21 8:39 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 5/9] package/freescale-qoriq: new package directory Changming Huang
2019-11-20 8:57 ` Thomas Petazzoni
2019-11-20 4:07 ` [Buildroot] [PATCH 6/9] package/freescale-qoriq/cadence: new package Changming Huang
2019-11-20 9:13 ` Thomas Petazzoni
2019-11-20 9:30 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:36 ` Thomas Petazzoni
2019-11-20 9:47 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 7/9] package/rcw: Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO Changming Huang
2019-11-20 9:14 ` Thomas Petazzoni
2019-11-20 9:34 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:38 ` Thomas Petazzoni
2019-11-20 10:22 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 8/9] board/freescale/common/ls: Add standard post image script for Layerscape processors Changming Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 9/9] configs/freescale_ls1028ardb*: new board Changming Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191120085944.78aed103@windsurf.home \
--to=thomas.petazzoni@bootlin.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox