* [Buildroot] [PATCH v2 1/3] board/andes: rearrange nds32 folder structure
@ 2022-01-25 5:49 Yu Chien Peter Lin
2022-01-25 5:49 ` [Buildroot] [PATCH v2 2/3] board/andes/ae350: add support for Andes AE350 Yu Chien Peter Lin
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Yu Chien Peter Lin @ 2022-01-25 5:49 UTC (permalink / raw)
To: buildroot; +Cc: Yu Chien Peter Lin, alankao
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
---
.../patches/linux/0001-nds32-Fix-boot-messages-garbled.patch | 0
board/andes/{ => ae3xx}/readme.txt | 0
configs/andes_ae3xx_defconfig | 2 +-
3 files changed, 1 insertion(+), 1 deletion(-)
rename board/andes/{ => ae3xx}/patches/linux/0001-nds32-Fix-boot-messages-garbled.patch (100%)
rename board/andes/{ => ae3xx}/readme.txt (100%)
diff --git a/board/andes/patches/linux/0001-nds32-Fix-boot-messages-garbled.patch b/board/andes/ae3xx/patches/linux/0001-nds32-Fix-boot-messages-garbled.patch
similarity index 100%
rename from board/andes/patches/linux/0001-nds32-Fix-boot-messages-garbled.patch
rename to board/andes/ae3xx/patches/linux/0001-nds32-Fix-boot-messages-garbled.patch
diff --git a/board/andes/readme.txt b/board/andes/ae3xx/readme.txt
similarity index 100%
rename from board/andes/readme.txt
rename to board/andes/ae3xx/readme.txt
diff --git a/configs/andes_ae3xx_defconfig b/configs/andes_ae3xx_defconfig
index 52634caa50..18051115c3 100644
--- a/configs/andes_ae3xx_defconfig
+++ b/configs/andes_ae3xx_defconfig
@@ -1,5 +1,5 @@
BR2_nds32=y
-BR2_GLOBAL_PATCH_DIR="board/andes/patches/"
+BR2_GLOBAL_PATCH_DIR="board/andes/ae3xx/patches"
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_ANDES_NDS32=y
BR2_LINUX_KERNEL=y
--
2.17.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Buildroot] [PATCH v2 2/3] board/andes/ae350: add support for Andes AE350 2022-01-25 5:49 [Buildroot] [PATCH v2 1/3] board/andes: rearrange nds32 folder structure Yu Chien Peter Lin @ 2022-01-25 5:49 ` Yu Chien Peter Lin 2022-02-09 23:39 ` Giulio Benetti 2022-01-25 5:49 ` [Buildroot] [PATCH v2 3/3] DEVELOPERS: add Yu-Chien Lin to board/andes Yu Chien Peter Lin 2022-02-09 22:58 ` [Buildroot] [PATCH v2 1/3] board/andes: rearrange nds32 folder structure Giulio Benetti 2 siblings, 1 reply; 8+ messages in thread From: Yu Chien Peter Lin @ 2022-01-25 5:49 UTC (permalink / raw) To: buildroot; +Cc: Yu Chien Peter Lin, alankao This patch provides defconfig and basic support for the Andes 45 series RISC-V architecture. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Signed-off-by: Alan Kao <alankao@andestech.com> --- board/andes/ae350/ae350.dts | 274 ++++++++++++++++++ board/andes/ae350/boot.cmd | 3 + board/andes/ae350/genimage_sdcard.cfg | 29 ++ ...isable-PIC-explicitly-for-assembling.patch | 29 ++ ...2-Enable-cache-for-opensbi-jump-mode.patch | 25 ++ ...001-Fix-mmc-no-partition-table-error.patch | 27 ++ ...2-Prevent-fw_dynamic-from-relocation.patch | 27 ++ ...0003-Fix-u-boot-proper-booting-issue.patch | 26 ++ ...04-Enable-printing-OpenSBI-boot-logo.patch | 25 ++ board/andes/ae350/readme.txt | 63 ++++ board/andes/ae350/uboot.config.fragment | 5 + configs/andes_ae350_45_defconfig | 40 +++ 12 files changed, 573 insertions(+) create mode 100755 board/andes/ae350/ae350.dts create mode 100644 board/andes/ae350/boot.cmd create mode 100644 board/andes/ae350/genimage_sdcard.cfg create mode 100644 board/andes/ae350/patches/opensbi/0001-Disable-PIC-explicitly-for-assembling.patch create mode 100644 board/andes/ae350/patches/opensbi/0002-Enable-cache-for-opensbi-jump-mode.patch create mode 100644 board/andes/ae350/patches/uboot/0001-Fix-mmc-no-partition-table-error.patch create mode 100644 board/andes/ae350/patches/uboot/0002-Prevent-fw_dynamic-from-relocation.patch create mode 100644 board/andes/ae350/patches/uboot/0003-Fix-u-boot-proper-booting-issue.patch create mode 100644 board/andes/ae350/patches/uboot/0004-Enable-printing-OpenSBI-boot-logo.patch create mode 100644 board/andes/ae350/readme.txt create mode 100644 board/andes/ae350/uboot.config.fragment create mode 100644 configs/andes_ae350_45_defconfig diff --git a/board/andes/ae350/ae350.dts b/board/andes/ae350/ae350.dts new file mode 100755 index 0000000000..5e5d70ab25 --- /dev/null +++ b/board/andes/ae350/ae350.dts @@ -0,0 +1,274 @@ +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; + compatible = "andestech,ae350"; + model = "andestech,ax45"; + aliases { + uart0 = &serial0; + spi0 = &spi; + }; + + chosen { + bootargs = "console=ttyS0,38400n8 earlycon=sbi debug loglevel=7"; + stdout-path = "uart0:38400n8"; + }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <60000000>; + CPU0: cpu@0 { + device_type = "cpu"; + reg = <0>; + status = "okay"; + compatible = "riscv"; + riscv,isa = "rv64i2p0m2p0a2p0f2p0d2p0c2p0xv5-1p1xdsp0p0"; + riscv,priv-major = <1>; + riscv,priv-minor = <10>; + mmu-type = "riscv,sv48"; + clock-frequency = <60000000>; + i-cache-size = <0x8000>; + i-cache-sets = <256>; + i-cache-block-size = <64>; + i-cache-line-size = <64>; + d-cache-size = <0x8000>; + d-cache-sets = <128>; + d-cache-block-size = <64>; + d-cache-line-size = <64>; + next-level-cache = <&L2>; + CPU0_intc: interrupt-controller { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + }; + }; + CPU1: cpu@1 { + device_type = "cpu"; + reg = <1>; + status = "okay"; + compatible = "riscv"; + riscv,isa = "rv64i2p0m2p0a2p0f2p0d2p0c2p0xv5-1p1xdsp0p0"; + riscv,priv-major = <1>; + riscv,priv-minor = <10>; + mmu-type = "riscv,sv48"; + clock-frequency = <60000000>; + i-cache-size = <0x8000>; + i-cache-sets = <256>; + i-cache-block-size = <64>; + i-cache-line-size = <64>; + d-cache-size = <0x8000>; + d-cache-sets = <128>; + d-cache-block-size = <64>; + d-cache-line-size = <64>; + next-level-cache = <&L2>; + CPU1_intc: interrupt-controller { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + }; + }; + CPU2: cpu@2 { + device_type = "cpu"; + reg = <2>; + status = "okay"; + compatible = "riscv"; + riscv,isa = "rv64i2p0m2p0a2p0f2p0d2p0c2p0xv5-1p1xdsp0p0"; + riscv,priv-major = <1>; + riscv,priv-minor = <10>; + mmu-type = "riscv,sv48"; + clock-frequency = <60000000>; + i-cache-size = <0x8000>; + i-cache-sets = <256>; + i-cache-block-size = <64>; + i-cache-line-size = <64>; + d-cache-size = <0x8000>; + d-cache-sets = <128>; + d-cache-block-size = <64>; + d-cache-line-size = <64>; + next-level-cache = <&L2>; + CPU2_intc: interrupt-controller { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + }; + }; + CPU3: cpu@3 { + device_type = "cpu"; + reg = <3>; + status = "okay"; + compatible = "riscv"; + riscv,isa = "rv64i2p0m2p0a2p0f2p0d2p0c2p0xv5-1p1xdsp0p0"; + riscv,priv-major = <1>; + riscv,priv-minor = <10>; + mmu-type = "riscv,sv48"; + clock-frequency = <60000000>; + i-cache-size = <0x8000>; + i-cache-sets = <256>; + i-cache-block-size = <64>; + i-cache-line-size = <64>; + d-cache-size = <0x8000>; + d-cache-sets = <128>; + d-cache-block-size = <64>; + d-cache-line-size = <64>; + next-level-cache = <&L2>; + CPU3_intc: interrupt-controller { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + }; + }; + }; + L2: l2-cache@e0500000 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + reg = <0x00000000 0xe0500000 0x00000000 0x00001000>; + andes,inst-prefetch = <3>; + andes,data-prefetch = <3>; + // The value format is <XRAMOCTL XRAMICTL> + andes,tag-ram-ctl = <0 0>; + andes,data-ram-ctl = <0 0>; + }; + memory@0 { + reg = <0x00000000 0x00000000 0x00000000 0x80000000>; + device_type = "memory"; + }; + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "andestech,riscv-ae350-soc", "simple-bus"; + ranges; + plic0: interrupt-controller@e4000000 { + compatible = "riscv,plic0"; + reg = <0x00000000 0xe4000000 0x00000000 0x02000000>; + interrupts-extended = < &CPU0_intc 11 &CPU0_intc 9 &CPU1_intc 11 &CPU1_intc 9 &CPU2_intc 11 &CPU2_intc 9 &CPU3_intc 11 &CPU3_intc 9>; + interrupt-controller; + #address-cells = <2>; + #interrupt-cells = <2>; + riscv,ndev = <71>; + }; + plic1: interrupt-controller@e6400000 { + compatible = "riscv,plic1"; + reg = <0x00000000 0xe6400000 0x00000000 0x00400000>; + interrupts-extended = < &CPU0_intc 3 &CPU1_intc 3 &CPU2_intc 3 &CPU3_intc 3>; + interrupt-controller; + #address-cells = <2>; + #interrupt-cells = <2>; + riscv,ndev = <4>; + }; + plmt0: plmt0@e6000000 { + compatible = "riscv,plmt0"; + reg = <0x00000000 0xe6000000 0x00000000 0x00100000>; + interrupts-extended = < &CPU0_intc 7 &CPU1_intc 7 &CPU2_intc 7 &CPU3_intc 7>; + }; + spiclk: virt_100mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + timer0: timer@f0400000 { + compatible = "andestech,atcpit100"; + reg = <0x00000000 0xf0400000 0x00000000 0x00001000>; + interrupts = <3 4>; + interrupt-parent = <&plic0>; + clock-frequency = <60000000>; + }; + pwm: pwm@f0400000 { + compatible = "andestech,atcpit100-pwm"; + reg = <0x00000000 0xf0400000 0x00000000 0x00001000>; + interrupts = <3 4>; + interrupt-parent = <&plic0>; + clock-frequency = <60000000>; + pwm-cells = <2>; + }; + wdt: wdt@f0500000 { + compatible = "andestech,atcwdt200"; + reg = <0x00000000 0xf0500000 0x00000000 0x00001000>; + interrupts = <3 4>; + interrupt-parent = <&plic0>; + clock-frequency = <15000000>; + }; + serial0: serial@f0300000 { + compatible = "andestech,uart16550", "ns16550a"; + reg = <0x00000000 0xf0300000 0x00000000 0x00001000>; + interrupts = <9 4>; + interrupt-parent = <&plic0>; + clock-frequency = <19660800>; + reg-shift = <2>; + reg-offset = <32>; + no-loopback-test = <1>; + }; + rtc0: rtc@f0600000 { + compatible = "andestech,atcrtc100"; + reg = <0x00000000 0xf0600000 0x00000000 0x00001000>; + interrupts = <1 4 2 4>; + interrupt-parent = <&plic0>; + wakeup-source; + }; + gpio: gpio@f0700000 { + compatible = "andestech,atcgpio100"; + reg = <0x00000000 0xf0700000 0x00000000 0x00001000>; + interrupts = <7 4>; + interrupt-parent = <&plic0>; + wakeup-source; + }; + mac0: mac@e0100000 { + compatible = "andestech,atmac100"; + reg = <0x00000000 0xe0100000 0x00000000 0x00001000>; + interrupts = <19 4>; + interrupt-parent = <&plic0>; + dma-coherent; + }; + smu: smu@f0100000 { + compatible = "andestech,atcsmu"; + reg = <0x00000000 0xf0100000 0x00000000 0x00001000>; + }; + mmc0: mmc@f0e00000 { + compatible = "andestech,atfsdc010"; + reg = <0x00000000 0xf0e00000 0x00000000 0x00001000>; + interrupts = <18 4>; + interrupt-parent = <&plic0>; + clock-freq-min-max = <400000 100000000>; + max-frequency = <100000000>; + fifo-depth = <16>; + cap-sd-highspeed; + dma-coherent; + }; + dma0: dma@f0c00000 { + compatible = "andestech,atcdmac300"; + reg = <0x00000000 0xf0c00000 0x00000000 0x00001000>; + interrupts = <10 4 64 4 65 4 66 4 67 4 68 4 69 4 70 4 71 4>; + interrupt-parent = <&plic0>; + dma-channels = <8>; + }; + lcd0: lcd@e0200000 { + compatible = "andestech,atflcdc100"; + reg = <0x00000000 0xe0200000 0x00000000 0x00001000>; + interrupts = <20 4>; + interrupt-parent = <&plic0>; + dma-coherent; + }; + pmu: pmu { + compatible = "riscv,andes-pmu"; + device_type = "pmu"; + }; + spi: spi@f0b00000 { + compatible = "andestech,atcspi200"; + reg = <0x00000000 0xf0b00000 0x00000000 0x00001000>; + interrupts = <4 4>; + interrupt-parent = <&plic0>; + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + clocks = <&spiclk>; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x00000000>; + spi-max-frequency = <50000000>; + spi-cpol; + spi-cpha; + }; + }; + }; +}; diff --git a/board/andes/ae350/boot.cmd b/board/andes/ae350/boot.cmd new file mode 100644 index 0000000000..2a046c6c7a --- /dev/null +++ b/board/andes/ae350/boot.cmd @@ -0,0 +1,3 @@ +setenv bootargs earlycon=sbi root=/dev/mmcblk0p2 rootwait +load mmc 0:1 0x600000 Image +booti 0x600000 - $fdtcontroladdr diff --git a/board/andes/ae350/genimage_sdcard.cfg b/board/andes/ae350/genimage_sdcard.cfg new file mode 100644 index 0000000000..e8bb3d4903 --- /dev/null +++ b/board/andes/ae350/genimage_sdcard.cfg @@ -0,0 +1,29 @@ +image boot.vfat { + vfat { + files = { + "Image", + "boot.scr", + "u-boot-spl.bin", + "u-boot.itb", + "ae350.dtb", + } + } + size = 128M +} + +image sdcard.img { + hdimage { + gpt = true + } + + partition u-boot { + partition-type-uuid = ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type-uuid = 0fc63daf-8483-4772-8e79-3d69d8477de4 + image = "rootfs.ext4" + } +} diff --git a/board/andes/ae350/patches/opensbi/0001-Disable-PIC-explicitly-for-assembling.patch b/board/andes/ae350/patches/opensbi/0001-Disable-PIC-explicitly-for-assembling.patch new file mode 100644 index 0000000000..aeafed4c9f --- /dev/null +++ b/board/andes/ae350/patches/opensbi/0001-Disable-PIC-explicitly-for-assembling.patch @@ -0,0 +1,29 @@ +From 3ccb71eeca42dbcd5e4d00ae1877a489ae82598d Mon Sep 17 00:00:00 2001 +From: Yu Chien Peter Lin <peterlin@andestech.com> +Date: Wed, 29 Dec 2021 16:04:54 +0800 +Subject: [PATCH] Disable PIC explicitly for assembling + +This patch is necessary if the fw_dynamic load address +is not equal to link address. +However, they are equal currently, since we include an u-boot +patch for preventing fw_dynamic relocation. + +Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> +--- + Makefile | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/Makefile b/Makefile +index d6f097d..441518d 100644 +--- a/Makefile ++++ b/Makefile +@@ -225,6 +225,7 @@ ASFLAGS += -mcmodel=$(PLATFORM_RISCV_CODE_MODEL) + ASFLAGS += $(GENFLAGS) + ASFLAGS += $(platform-asflags-y) + ASFLAGS += $(firmware-asflags-y) ++ASFLAGS += -fno-pic + + ARFLAGS = rcs + +-- +2.25.1 diff --git a/board/andes/ae350/patches/opensbi/0002-Enable-cache-for-opensbi-jump-mode.patch b/board/andes/ae350/patches/opensbi/0002-Enable-cache-for-opensbi-jump-mode.patch new file mode 100644 index 0000000000..ae48a760c8 --- /dev/null +++ b/board/andes/ae350/patches/opensbi/0002-Enable-cache-for-opensbi-jump-mode.patch @@ -0,0 +1,25 @@ +From 325328f4204b40b1fcc8db3b46c7c8805710d21c Mon Sep 17 00:00:00 2001 +From: Yu Chien Peter Lin <peterlin@andestech.com> +Date: Thu, 30 Dec 2021 08:47:34 +0800 +Subject: [PATCH] Enable cache for opensbi jump mode + +Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> +--- + firmware/fw_base.S | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/firmware/fw_base.S b/firmware/fw_base.S +index ab33e11..155d230 100644 +--- a/firmware/fw_base.S ++++ b/firmware/fw_base.S +@@ -46,6 +46,8 @@ + .globl _start + .globl _start_warm + _start: ++ li t0, 0x80003 ++ csrw 0x7ca, t0 + /* Find preferred boot HART id */ + MOV_3R s0, a0, s1, a1, s2, a2 + call fw_boot_hart +-- +2.25.1 diff --git a/board/andes/ae350/patches/uboot/0001-Fix-mmc-no-partition-table-error.patch b/board/andes/ae350/patches/uboot/0001-Fix-mmc-no-partition-table-error.patch new file mode 100644 index 0000000000..7aff3cebf6 --- /dev/null +++ b/board/andes/ae350/patches/uboot/0001-Fix-mmc-no-partition-table-error.patch @@ -0,0 +1,27 @@ +From ea4675215b53d16a72d29b8a6fc6a86cccf59cf0 Mon Sep 17 00:00:00 2001 +From: Yu Chien Peter Lin <peterlin@andestech.com> +Date: Wed, 5 Jan 2022 11:00:59 +0800 +Subject: [PATCH] Fix mmc no partition table error + +Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> +--- + drivers/mmc/ftsdc010_mci.c | 4 ---- + 1 file changed, 4 deletions(-) + +diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c +index 570d54cf..3b1e0aa0 100644 +--- a/drivers/mmc/ftsdc010_mci.c ++++ b/drivers/mmc/ftsdc010_mci.c +@@ -438,10 +438,6 @@ static int ftsdc010_mmc_probe(struct udevice *dev) + return ret; + #endif + +- if (dev_read_bool(dev, "cap-mmc-highspeed") || \ +- dev_read_bool(dev, "cap-sd-highspeed")) +- chip->caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz; +- + ftsdc_setup_cfg(&plat->cfg, dev->name, chip->buswidth, chip->caps, + priv->minmax[1] , priv->minmax[0]); + chip->mmc = &plat->mmc; +-- +2.25.1 diff --git a/board/andes/ae350/patches/uboot/0002-Prevent-fw_dynamic-from-relocation.patch b/board/andes/ae350/patches/uboot/0002-Prevent-fw_dynamic-from-relocation.patch new file mode 100644 index 0000000000..c6e1896f1c --- /dev/null +++ b/board/andes/ae350/patches/uboot/0002-Prevent-fw_dynamic-from-relocation.patch @@ -0,0 +1,27 @@ +From 4c0c5378d032f2f95577585935624baf7b4decf3 Mon Sep 17 00:00:00 2001 +From: Yu Chien Peter Lin <peterlin@andestech.com> +Date: Wed, 5 Jan 2022 11:02:26 +0800 +Subject: [PATCH] Prevent fw_dynamic from relocation + +This patch prevents OpenSBI relocation, load fw_dynamic to link address + +Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> +--- + board/AndesTech/ax25-ae350/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/board/AndesTech/ax25-ae350/Kconfig b/board/AndesTech/ax25-ae350/Kconfig +index e50f505a..385c4c11 100644 +--- a/board/AndesTech/ax25-ae350/Kconfig ++++ b/board/AndesTech/ax25-ae350/Kconfig +@@ -25,7 +25,7 @@ config SPL_TEXT_BASE + default 0x800000 + + config SPL_OPENSBI_LOAD_ADDR +- default 0x01000000 ++ default 0x0 + + config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y +-- +2.25.1 diff --git a/board/andes/ae350/patches/uboot/0003-Fix-u-boot-proper-booting-issue.patch b/board/andes/ae350/patches/uboot/0003-Fix-u-boot-proper-booting-issue.patch new file mode 100644 index 0000000000..20598fdba4 --- /dev/null +++ b/board/andes/ae350/patches/uboot/0003-Fix-u-boot-proper-booting-issue.patch @@ -0,0 +1,26 @@ +From 3d09501175ae6f5e3f6520b48b1358226a99ff16 Mon Sep 17 00:00:00 2001 +From: Yu Chien Peter Lin <peterlin@andestech.com> +Date: Wed, 5 Jan 2022 18:17:39 +0800 +Subject: [PATCH] Fix u-boot proper booting issue + +Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> +--- + arch/riscv/cpu/start.S | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S +index 76850ec9..2ccda4f5 100644 +--- a/arch/riscv/cpu/start.S ++++ b/arch/riscv/cpu/start.S +@@ -139,7 +139,9 @@ call_harts_early_init: + * accesses gd). + */ + mv gp, s0 ++#if !CONFIG_IS_ENABLED(RISCV_SMODE) + bnez tp, secondary_hart_loop ++#endif + #endif + + jal board_init_f_init_reserve +-- +2.25.1 diff --git a/board/andes/ae350/patches/uboot/0004-Enable-printing-OpenSBI-boot-logo.patch b/board/andes/ae350/patches/uboot/0004-Enable-printing-OpenSBI-boot-logo.patch new file mode 100644 index 0000000000..efd78ab26d --- /dev/null +++ b/board/andes/ae350/patches/uboot/0004-Enable-printing-OpenSBI-boot-logo.patch @@ -0,0 +1,25 @@ +From 3847a959ac4c07facbd80104ca5fa6a91fad5f35 Mon Sep 17 00:00:00 2001 +From: Yu Chien Peter Lin <peterlin@andestech.com> +Date: Thu, 6 Jan 2022 13:50:07 +0800 +Subject: [PATCH] Enable printing OpenSBI boot logo + +Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> +--- + include/opensbi.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/include/opensbi.h b/include/opensbi.h +index d812cc8c..91fb8fd9 100644 +--- a/include/opensbi.h ++++ b/include/opensbi.h +@@ -20,7 +20,7 @@ + + enum sbi_scratch_options { + /** Disable prints during boot */ +- SBI_SCRATCH_NO_BOOT_PRINTS = (1 << 0), ++ SBI_SCRATCH_NO_BOOT_PRINTS = 0, + }; + + /** Representation dynamic info passed by previous booting stage */ +-- +2.25.1 diff --git a/board/andes/ae350/readme.txt b/board/andes/ae350/readme.txt new file mode 100644 index 0000000000..a104bb108e --- /dev/null +++ b/board/andes/ae350/readme.txt @@ -0,0 +1,63 @@ +Intro +===== + +Andestech AE350 Platform + +The AE350 prototype demonstrates the AE350 platform on the FPGA. + +How to build it +=============== + +Configure Buildroot +------------------- + + $ make andes_ae350_45_defconfig + +If you want to customize your configuration: + + $ make menuconfig + +Build everything +---------------- +Note: you will need to access to the network, since Buildroot will +download the packages' sources. + + $ make + +Result of the build +------------------- + +After building, you should obtain the following files: + + output/images/ + |-- Image + |-- ae350.dtb + |-- boot.scr + |-- boot.vfat + |-- fw_dynamic.bin + |-- fw_dynamic.elf + |-- fw_jump.bin + |-- fw_jump.elf + |-- rootfs.ext2 + |-- rootfs.ext4 -> rootfs.ext2 + |-- sdcard.img + |-- u-boot-spl.bin + `-- u-boot.itb + +Copy the sdcard.img to a SD card with "dd": + + $ sudo dd if=sdcard.img of=/dev/sdX bs=4096 + +Your SD card partition should be: + + Disk /dev/mmcblk0: 31457280 sectors, 3072M + Logical sector size: 512 + Disk identifier (GUID): 546663ee-d2f1-427f-93a5-5c7b69dd801c + Partition table holds up to 128 entries + First usable sector is 34, last usable sector is 385062 + + Number Start (sector) End (sector) Size Name + 1 34 262177 128M u-boot + 2 262178 385057 60.0M rootfs + +Insert SD card and reset the board, should boot Linux from mmc. diff --git a/board/andes/ae350/uboot.config.fragment b/board/andes/ae350/uboot.config.fragment new file mode 100644 index 0000000000..4992d712a5 --- /dev/null +++ b/board/andes/ae350/uboot.config.fragment @@ -0,0 +1,5 @@ +CONFIG_SPL_FS_FAT=y +CONFIG_SPL_MMC=y +# CONFIG_SPL_RAM_SUPPORT is not set +# CONFIG_OF_BOARD is not set +CONFIG_OF_SEPARATE=y diff --git a/configs/andes_ae350_45_defconfig b/configs/andes_ae350_45_defconfig new file mode 100644 index 0000000000..b8f91e50b3 --- /dev/null +++ b/configs/andes_ae350_45_defconfig @@ -0,0 +1,40 @@ +BR2_riscv=y +BR2_riscv_custom=y +BR2_RISCV_ISA_CUSTOM_RVM=y +BR2_RISCV_ISA_CUSTOM_RVF=y +BR2_RISCV_ISA_CUSTOM_RVD=y +BR2_RISCV_ISA_CUSTOM_RVC=y +BR2_GLOBAL_PATCH_DIR="board/andes/ae350/patches" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/andes/ae350/genimage_sdcard.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,andestech,linux,591f3f73757ab80b46e7e1e10067ce3c82ff83a9)/linux-591f3f73757ab80b46e7e1e10067ce3c82ff83a9.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="ae350_rv64_smp" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/andes/ae350/ae350.dts" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_OPENSBI=y +BR2_TARGET_OPENSBI_PLAT="andes/ae350" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ae350_rv64_spl_xip" +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/andes/ae350/uboot.config.fragment" +BR2_TARGET_UBOOT_NEEDS_OPENSBI=y +# BR2_TARGET_UBOOT_FORMAT_BIN is not set +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="ARCH_FLAGS=-march=rv64imafdc" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y +BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/andes/ae350/boot.cmd" -- 2.17.1 _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [Buildroot] [PATCH v2 2/3] board/andes/ae350: add support for Andes AE350 2022-01-25 5:49 ` [Buildroot] [PATCH v2 2/3] board/andes/ae350: add support for Andes AE350 Yu Chien Peter Lin @ 2022-02-09 23:39 ` Giulio Benetti 0 siblings, 0 replies; 8+ messages in thread From: Giulio Benetti @ 2022-02-09 23:39 UTC (permalink / raw) To: Yu Chien Peter Lin, buildroot; +Cc: alankao Hi Peter, I review it now, On 25/01/22 06:49, Yu Chien Peter Lin wrote: > This patch provides defconfig and basic support for the Andes > 45 series RISC-V architecture. > > Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> > Signed-off-by: Alan Kao <alankao@andestech.com> Here you need to write the changes from previous patches like: --- V1->V2: * done this * done that V2->V3: * done this * done that > --- > board/andes/ae350/ae350.dts | 274 ++++++++++++++++++ > board/andes/ae350/boot.cmd | 3 + > board/andes/ae350/genimage_sdcard.cfg | 29 ++ > ...isable-PIC-explicitly-for-assembling.patch | 29 ++ > ...2-Enable-cache-for-opensbi-jump-mode.patch | 25 ++ > ...001-Fix-mmc-no-partition-table-error.patch | 27 ++ > ...2-Prevent-fw_dynamic-from-relocation.patch | 27 ++ > ...0003-Fix-u-boot-proper-booting-issue.patch | 26 ++ > ...04-Enable-printing-OpenSBI-boot-logo.patch | 25 ++ > board/andes/ae350/readme.txt | 63 ++++ > board/andes/ae350/uboot.config.fragment | 5 + > configs/andes_ae350_45_defconfig | 40 +++ > 12 files changed, 573 insertions(+) > create mode 100755 board/andes/ae350/ae350.dts > create mode 100644 board/andes/ae350/boot.cmd > create mode 100644 board/andes/ae350/genimage_sdcard.cfg > create mode 100644 board/andes/ae350/patches/opensbi/0001-Disable-PIC-explicitly-for-assembling.patch > create mode 100644 board/andes/ae350/patches/opensbi/0002-Enable-cache-for-opensbi-jump-mode.patch > create mode 100644 board/andes/ae350/patches/uboot/0001-Fix-mmc-no-partition-table-error.patch > create mode 100644 board/andes/ae350/patches/uboot/0002-Prevent-fw_dynamic-from-relocation.patch > create mode 100644 board/andes/ae350/patches/uboot/0003-Fix-u-boot-proper-booting-issue.patch > create mode 100644 board/andes/ae350/patches/uboot/0004-Enable-printing-OpenSBI-boot-logo.patch Would it be possible for you to upstream these patches? I mean, do you maintain the uboot, opensbi repositories so you can do that? If yes it would be great having no patches at all here. > create mode 100644 board/andes/ae350/readme.txt > create mode 100644 board/andes/ae350/uboot.config.fragment > create mode 100644 configs/andes_ae350_45_defconfig > > diff --git a/board/andes/ae350/ae350.dts b/board/andes/ae350/ae350.dts > new file mode 100755 > index 0000000000..5e5d70ab25 > --- /dev/null > +++ b/board/andes/ae350/ae350.dts > @@ -0,0 +1,274 @@ > +/dts-v1/; > + > +/ { > + #address-cells = <2>; > + #size-cells = <2>; > + compatible = "andestech,ae350"; > + model = "andestech,ax45"; > + aliases { > + uart0 = &serial0; > + spi0 = &spi; > + }; > + > + chosen { > + bootargs = "console=ttyS0,38400n8 earlycon=sbi debug loglevel=7"; > + stdout-path = "uart0:38400n8"; > + }; > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + timebase-frequency = <60000000>; > + CPU0: cpu@0 { > + device_type = "cpu"; > + reg = <0>; > + status = "okay"; > + compatible = "riscv"; > + riscv,isa = "rv64i2p0m2p0a2p0f2p0d2p0c2p0xv5-1p1xdsp0p0"; > + riscv,priv-major = <1>; > + riscv,priv-minor = <10>; > + mmu-type = "riscv,sv48"; > + clock-frequency = <60000000>; > + i-cache-size = <0x8000>; > + i-cache-sets = <256>; > + i-cache-block-size = <64>; > + i-cache-line-size = <64>; > + d-cache-size = <0x8000>; > + d-cache-sets = <128>; > + d-cache-block-size = <64>; > + d-cache-line-size = <64>; > + next-level-cache = <&L2>; > + CPU0_intc: interrupt-controller { > + #interrupt-cells = <1>; > + interrupt-controller; > + compatible = "riscv,cpu-intc"; > + }; > + }; > + CPU1: cpu@1 { > + device_type = "cpu"; > + reg = <1>; > + status = "okay"; > + compatible = "riscv"; > + riscv,isa = "rv64i2p0m2p0a2p0f2p0d2p0c2p0xv5-1p1xdsp0p0"; > + riscv,priv-major = <1>; > + riscv,priv-minor = <10>; > + mmu-type = "riscv,sv48"; > + clock-frequency = <60000000>; > + i-cache-size = <0x8000>; > + i-cache-sets = <256>; > + i-cache-block-size = <64>; > + i-cache-line-size = <64>; > + d-cache-size = <0x8000>; > + d-cache-sets = <128>; > + d-cache-block-size = <64>; > + d-cache-line-size = <64>; > + next-level-cache = <&L2>; > + CPU1_intc: interrupt-controller { > + #interrupt-cells = <1>; > + interrupt-controller; > + compatible = "riscv,cpu-intc"; > + }; > + }; > + CPU2: cpu@2 { > + device_type = "cpu"; > + reg = <2>; > + status = "okay"; > + compatible = "riscv"; > + riscv,isa = "rv64i2p0m2p0a2p0f2p0d2p0c2p0xv5-1p1xdsp0p0"; > + riscv,priv-major = <1>; > + riscv,priv-minor = <10>; > + mmu-type = "riscv,sv48"; > + clock-frequency = <60000000>; > + i-cache-size = <0x8000>; > + i-cache-sets = <256>; > + i-cache-block-size = <64>; > + i-cache-line-size = <64>; > + d-cache-size = <0x8000>; > + d-cache-sets = <128>; > + d-cache-block-size = <64>; > + d-cache-line-size = <64>; > + next-level-cache = <&L2>; > + CPU2_intc: interrupt-controller { > + #interrupt-cells = <1>; > + interrupt-controller; > + compatible = "riscv,cpu-intc"; > + }; > + }; > + CPU3: cpu@3 { > + device_type = "cpu"; > + reg = <3>; > + status = "okay"; > + compatible = "riscv"; > + riscv,isa = "rv64i2p0m2p0a2p0f2p0d2p0c2p0xv5-1p1xdsp0p0"; > + riscv,priv-major = <1>; > + riscv,priv-minor = <10>; > + mmu-type = "riscv,sv48"; > + clock-frequency = <60000000>; > + i-cache-size = <0x8000>; > + i-cache-sets = <256>; > + i-cache-block-size = <64>; > + i-cache-line-size = <64>; > + d-cache-size = <0x8000>; > + d-cache-sets = <128>; > + d-cache-block-size = <64>; > + d-cache-line-size = <64>; > + next-level-cache = <&L2>; > + CPU3_intc: interrupt-controller { > + #interrupt-cells = <1>; > + interrupt-controller; > + compatible = "riscv,cpu-intc"; > + }; > + }; > + }; > + L2: l2-cache@e0500000 { > + compatible = "cache"; > + cache-level = <2>; > + cache-size = <0x80000>; > + reg = <0x00000000 0xe0500000 0x00000000 0x00001000>; > + andes,inst-prefetch = <3>; > + andes,data-prefetch = <3>; > + // The value format is <XRAMOCTL XRAMICTL> > + andes,tag-ram-ctl = <0 0>; > + andes,data-ram-ctl = <0 0>; > + }; > + memory@0 { > + reg = <0x00000000 0x00000000 0x00000000 0x80000000>; > + device_type = "memory"; > + }; > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + compatible = "andestech,riscv-ae350-soc", "simple-bus"; > + ranges; > + plic0: interrupt-controller@e4000000 { > + compatible = "riscv,plic0"; > + reg = <0x00000000 0xe4000000 0x00000000 0x02000000>; > + interrupts-extended = < &CPU0_intc 11 &CPU0_intc 9 &CPU1_intc 11 &CPU1_intc 9 &CPU2_intc 11 &CPU2_intc 9 &CPU3_intc 11 &CPU3_intc 9>; > + interrupt-controller; > + #address-cells = <2>; > + #interrupt-cells = <2>; > + riscv,ndev = <71>; > + }; > + plic1: interrupt-controller@e6400000 { > + compatible = "riscv,plic1"; > + reg = <0x00000000 0xe6400000 0x00000000 0x00400000>; > + interrupts-extended = < &CPU0_intc 3 &CPU1_intc 3 &CPU2_intc 3 &CPU3_intc 3>; > + interrupt-controller; > + #address-cells = <2>; > + #interrupt-cells = <2>; > + riscv,ndev = <4>; > + }; > + plmt0: plmt0@e6000000 { > + compatible = "riscv,plmt0"; > + reg = <0x00000000 0xe6000000 0x00000000 0x00100000>; > + interrupts-extended = < &CPU0_intc 7 &CPU1_intc 7 &CPU2_intc 7 &CPU3_intc 7>; > + }; > + spiclk: virt_100mhz { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <100000000>; > + }; > + timer0: timer@f0400000 { > + compatible = "andestech,atcpit100"; > + reg = <0x00000000 0xf0400000 0x00000000 0x00001000>; > + interrupts = <3 4>; > + interrupt-parent = <&plic0>; > + clock-frequency = <60000000>; > + }; > + pwm: pwm@f0400000 { > + compatible = "andestech,atcpit100-pwm"; > + reg = <0x00000000 0xf0400000 0x00000000 0x00001000>; > + interrupts = <3 4>; > + interrupt-parent = <&plic0>; > + clock-frequency = <60000000>; > + pwm-cells = <2>; > + }; > + wdt: wdt@f0500000 { > + compatible = "andestech,atcwdt200"; > + reg = <0x00000000 0xf0500000 0x00000000 0x00001000>; > + interrupts = <3 4>; > + interrupt-parent = <&plic0>; > + clock-frequency = <15000000>; > + }; > + serial0: serial@f0300000 { > + compatible = "andestech,uart16550", "ns16550a"; > + reg = <0x00000000 0xf0300000 0x00000000 0x00001000>; > + interrupts = <9 4>; > + interrupt-parent = <&plic0>; > + clock-frequency = <19660800>; > + reg-shift = <2>; > + reg-offset = <32>; > + no-loopback-test = <1>; > + }; > + rtc0: rtc@f0600000 { > + compatible = "andestech,atcrtc100"; > + reg = <0x00000000 0xf0600000 0x00000000 0x00001000>; > + interrupts = <1 4 2 4>; > + interrupt-parent = <&plic0>; > + wakeup-source; > + }; > + gpio: gpio@f0700000 { > + compatible = "andestech,atcgpio100"; > + reg = <0x00000000 0xf0700000 0x00000000 0x00001000>; > + interrupts = <7 4>; > + interrupt-parent = <&plic0>; > + wakeup-source; > + }; > + mac0: mac@e0100000 { > + compatible = "andestech,atmac100"; > + reg = <0x00000000 0xe0100000 0x00000000 0x00001000>; > + interrupts = <19 4>; > + interrupt-parent = <&plic0>; > + dma-coherent; > + }; > + smu: smu@f0100000 { > + compatible = "andestech,atcsmu"; > + reg = <0x00000000 0xf0100000 0x00000000 0x00001000>; > + }; > + mmc0: mmc@f0e00000 { > + compatible = "andestech,atfsdc010"; > + reg = <0x00000000 0xf0e00000 0x00000000 0x00001000>; > + interrupts = <18 4>; > + interrupt-parent = <&plic0>; > + clock-freq-min-max = <400000 100000000>; > + max-frequency = <100000000>; > + fifo-depth = <16>; > + cap-sd-highspeed; > + dma-coherent; > + }; > + dma0: dma@f0c00000 { > + compatible = "andestech,atcdmac300"; > + reg = <0x00000000 0xf0c00000 0x00000000 0x00001000>; > + interrupts = <10 4 64 4 65 4 66 4 67 4 68 4 69 4 70 4 71 4>; > + interrupt-parent = <&plic0>; > + dma-channels = <8>; > + }; > + lcd0: lcd@e0200000 { > + compatible = "andestech,atflcdc100"; > + reg = <0x00000000 0xe0200000 0x00000000 0x00001000>; > + interrupts = <20 4>; > + interrupt-parent = <&plic0>; > + dma-coherent; > + }; > + pmu: pmu { > + compatible = "riscv,andes-pmu"; > + device_type = "pmu"; > + }; > + spi: spi@f0b00000 { > + compatible = "andestech,atcspi200"; > + reg = <0x00000000 0xf0b00000 0x00000000 0x00001000>; > + interrupts = <4 4>; > + interrupt-parent = <&plic0>; > + #address-cells = <1>; > + #size-cells = <0>; > + num-cs = <1>; > + clocks = <&spiclk>; > + flash@0 { > + compatible = "jedec,spi-nor"; > + reg = <0x00000000>; > + spi-max-frequency = <50000000>; > + spi-cpol; > + spi-cpha; > + }; > + }; > + }; > +}; It's a bit out of topic, but with this .dts ^^^ you define and entire SoC+board, shouldn't it be like a .dtsi file for SoC and a .dts file for board? > diff --git a/board/andes/ae350/boot.cmd b/board/andes/ae350/boot.cmd > new file mode 100644 > index 0000000000..2a046c6c7a > --- /dev/null > +++ b/board/andes/ae350/boot.cmd > @@ -0,0 +1,3 @@ > +setenv bootargs earlycon=sbi root=/dev/mmcblk0p2 rootwait > +load mmc 0:1 0x600000 Image > +booti 0x600000 - $fdtcontroladdr This is ok, but during the last 15-20 days I've seen the increasing wish to go for extlinux.conf instead of boot.scr because it's easier to debug. Then nothing prevents one to customize the defconfig and use the boot.scr in production, where for example I find checksum very important. But please use extlinux.conf here. > diff --git a/board/andes/ae350/genimage_sdcard.cfg b/board/andes/ae350/genimage_sdcard.cfg > new file mode 100644 > index 0000000000..e8bb3d4903 > --- /dev/null > +++ b/board/andes/ae350/genimage_sdcard.cfg > @@ -0,0 +1,29 @@ > +image boot.vfat { > + vfat { > + files = { > + "Image", > + "boot.scr", > + "u-boot-spl.bin", > + "u-boot.itb", > + "ae350.dtb", > + } > + } > + size = 128M > +} > + > +image sdcard.img { > + hdimage { > + gpt = true > + } > + > + partition u-boot { > + partition-type-uuid = ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 > + bootable = "true" > + image = "boot.vfat" > + } > + > + partition rootfs { > + partition-type-uuid = 0fc63daf-8483-4772-8e79-3d69d8477de4 > + image = "rootfs.ext4" > + } > +} This file ^^^ doesn't respect the standard I've defined in Buildroot manual: https://buildroot.org/downloads/manual/manual.html#writing-genimage-cfg It's some time I have to write a Linter for it, but time is always few and I will take some other time :-/ > diff --git a/board/andes/ae350/patches/opensbi/0001-Disable-PIC-explicitly-for-assembling.patch b/board/andes/ae350/patches/opensbi/0001-Disable-PIC-explicitly-for-assembling.patch > new file mode 100644 > index 0000000000..aeafed4c9f > --- /dev/null > +++ b/board/andes/ae350/patches/opensbi/0001-Disable-PIC-explicitly-for-assembling.patch > @@ -0,0 +1,29 @@ > +From 3ccb71eeca42dbcd5e4d00ae1877a489ae82598d Mon Sep 17 00:00:00 2001 > +From: Yu Chien Peter Lin <peterlin@andestech.com> > +Date: Wed, 29 Dec 2021 16:04:54 +0800 > +Subject: [PATCH] Disable PIC explicitly for assembling > + > +This patch is necessary if the fw_dynamic load address > +is not equal to link address. > +However, they are equal currently, since we include an u-boot > +patch for preventing fw_dynamic relocation. > + > +Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> > +--- > + Makefile | 1 + > + 1 file changed, 1 insertion(+) > + > +diff --git a/Makefile b/Makefile > +index d6f097d..441518d 100644 > +--- a/Makefile > ++++ b/Makefile > +@@ -225,6 +225,7 @@ ASFLAGS += -mcmodel=$(PLATFORM_RISCV_CODE_MODEL) > + ASFLAGS += $(GENFLAGS) > + ASFLAGS += $(platform-asflags-y) > + ASFLAGS += $(firmware-asflags-y) > ++ASFLAGS += -fno-pic > + > + ARFLAGS = rcs > + > +-- > +2.25.1 > diff --git a/board/andes/ae350/patches/opensbi/0002-Enable-cache-for-opensbi-jump-mode.patch b/board/andes/ae350/patches/opensbi/0002-Enable-cache-for-opensbi-jump-mode.patch > new file mode 100644 > index 0000000000..ae48a760c8 > --- /dev/null > +++ b/board/andes/ae350/patches/opensbi/0002-Enable-cache-for-opensbi-jump-mode.patch > @@ -0,0 +1,25 @@ > +From 325328f4204b40b1fcc8db3b46c7c8805710d21c Mon Sep 17 00:00:00 2001 > +From: Yu Chien Peter Lin <peterlin@andestech.com> > +Date: Thu, 30 Dec 2021 08:47:34 +0800 > +Subject: [PATCH] Enable cache for opensbi jump mode > + > +Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> > +--- > + firmware/fw_base.S | 2 ++ > + 1 file changed, 2 insertions(+) > + > +diff --git a/firmware/fw_base.S b/firmware/fw_base.S > +index ab33e11..155d230 100644 > +--- a/firmware/fw_base.S > ++++ b/firmware/fw_base.S > +@@ -46,6 +46,8 @@ > + .globl _start > + .globl _start_warm > + _start: > ++ li t0, 0x80003 > ++ csrw 0x7ca, t0 > + /* Find preferred boot HART id */ > + MOV_3R s0, a0, s1, a1, s2, a2 > + call fw_boot_hart > +-- > +2.25.1 > diff --git a/board/andes/ae350/patches/uboot/0001-Fix-mmc-no-partition-table-error.patch b/board/andes/ae350/patches/uboot/0001-Fix-mmc-no-partition-table-error.patch > new file mode 100644 > index 0000000000..7aff3cebf6 > --- /dev/null > +++ b/board/andes/ae350/patches/uboot/0001-Fix-mmc-no-partition-table-error.patch > @@ -0,0 +1,27 @@ > +From ea4675215b53d16a72d29b8a6fc6a86cccf59cf0 Mon Sep 17 00:00:00 2001 > +From: Yu Chien Peter Lin <peterlin@andestech.com> > +Date: Wed, 5 Jan 2022 11:00:59 +0800 > +Subject: [PATCH] Fix mmc no partition table error > + > +Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> > +--- > + drivers/mmc/ftsdc010_mci.c | 4 ---- > + 1 file changed, 4 deletions(-) > + > +diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c > +index 570d54cf..3b1e0aa0 100644 > +--- a/drivers/mmc/ftsdc010_mci.c > ++++ b/drivers/mmc/ftsdc010_mci.c > +@@ -438,10 +438,6 @@ static int ftsdc010_mmc_probe(struct udevice *dev) > + return ret; > + #endif > + > +- if (dev_read_bool(dev, "cap-mmc-highspeed") || \ > +- dev_read_bool(dev, "cap-sd-highspeed")) > +- chip->caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz; > +- > + ftsdc_setup_cfg(&plat->cfg, dev->name, chip->buswidth, chip->caps, > + priv->minmax[1] , priv->minmax[0]); > + chip->mmc = &plat->mmc; > +-- > +2.25.1 > diff --git a/board/andes/ae350/patches/uboot/0002-Prevent-fw_dynamic-from-relocation.patch b/board/andes/ae350/patches/uboot/0002-Prevent-fw_dynamic-from-relocation.patch > new file mode 100644 > index 0000000000..c6e1896f1c > --- /dev/null > +++ b/board/andes/ae350/patches/uboot/0002-Prevent-fw_dynamic-from-relocation.patch > @@ -0,0 +1,27 @@ > +From 4c0c5378d032f2f95577585935624baf7b4decf3 Mon Sep 17 00:00:00 2001 > +From: Yu Chien Peter Lin <peterlin@andestech.com> > +Date: Wed, 5 Jan 2022 11:02:26 +0800 > +Subject: [PATCH] Prevent fw_dynamic from relocation > + > +This patch prevents OpenSBI relocation, load fw_dynamic to link address > + > +Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> > +--- > + board/AndesTech/ax25-ae350/Kconfig | 2 +- > + 1 file changed, 1 insertion(+), 1 deletion(-) > + > +diff --git a/board/AndesTech/ax25-ae350/Kconfig b/board/AndesTech/ax25-ae350/Kconfig > +index e50f505a..385c4c11 100644 > +--- a/board/AndesTech/ax25-ae350/Kconfig > ++++ b/board/AndesTech/ax25-ae350/Kconfig > +@@ -25,7 +25,7 @@ config SPL_TEXT_BASE > + default 0x800000 > + > + config SPL_OPENSBI_LOAD_ADDR > +- default 0x01000000 > ++ default 0x0 > + > + config BOARD_SPECIFIC_OPTIONS # dummy > + def_bool y > +-- > +2.25.1 > diff --git a/board/andes/ae350/patches/uboot/0003-Fix-u-boot-proper-booting-issue.patch b/board/andes/ae350/patches/uboot/0003-Fix-u-boot-proper-booting-issue.patch > new file mode 100644 > index 0000000000..20598fdba4 > --- /dev/null > +++ b/board/andes/ae350/patches/uboot/0003-Fix-u-boot-proper-booting-issue.patch > @@ -0,0 +1,26 @@ > +From 3d09501175ae6f5e3f6520b48b1358226a99ff16 Mon Sep 17 00:00:00 2001 > +From: Yu Chien Peter Lin <peterlin@andestech.com> > +Date: Wed, 5 Jan 2022 18:17:39 +0800 > +Subject: [PATCH] Fix u-boot proper booting issue > + > +Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> > +--- > + arch/riscv/cpu/start.S | 2 ++ > + 1 file changed, 2 insertions(+) > + > +diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S > +index 76850ec9..2ccda4f5 100644 > +--- a/arch/riscv/cpu/start.S > ++++ b/arch/riscv/cpu/start.S > +@@ -139,7 +139,9 @@ call_harts_early_init: > + * accesses gd). > + */ > + mv gp, s0 > ++#if !CONFIG_IS_ENABLED(RISCV_SMODE) > + bnez tp, secondary_hart_loop > ++#endif > + #endif > + > + jal board_init_f_init_reserve > +-- > +2.25.1 > diff --git a/board/andes/ae350/patches/uboot/0004-Enable-printing-OpenSBI-boot-logo.patch b/board/andes/ae350/patches/uboot/0004-Enable-printing-OpenSBI-boot-logo.patch > new file mode 100644 > index 0000000000..efd78ab26d > --- /dev/null > +++ b/board/andes/ae350/patches/uboot/0004-Enable-printing-OpenSBI-boot-logo.patch > @@ -0,0 +1,25 @@ > +From 3847a959ac4c07facbd80104ca5fa6a91fad5f35 Mon Sep 17 00:00:00 2001 > +From: Yu Chien Peter Lin <peterlin@andestech.com> > +Date: Thu, 6 Jan 2022 13:50:07 +0800 > +Subject: [PATCH] Enable printing OpenSBI boot logo > + > +Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> > +--- > + include/opensbi.h | 2 +- > + 1 file changed, 1 insertion(+), 1 deletion(-) > + > +diff --git a/include/opensbi.h b/include/opensbi.h > +index d812cc8c..91fb8fd9 100644 > +--- a/include/opensbi.h > ++++ b/include/opensbi.h > +@@ -20,7 +20,7 @@ > + > + enum sbi_scratch_options { > + /** Disable prints during boot */ > +- SBI_SCRATCH_NO_BOOT_PRINTS = (1 << 0), > ++ SBI_SCRATCH_NO_BOOT_PRINTS = 0, > + }; > + > + /** Representation dynamic info passed by previous booting stage */ > +-- > +2.25.1 > diff --git a/board/andes/ae350/readme.txt b/board/andes/ae350/readme.txt > new file mode 100644 > index 0000000000..a104bb108e > --- /dev/null > +++ b/board/andes/ae350/readme.txt > @@ -0,0 +1,63 @@ > +Intro > +===== > + > +Andestech AE350 Platform > + > +The AE350 prototype demonstrates the AE350 platform on the FPGA. > + > +How to build it > +=============== > + > +Configure Buildroot > +------------------- > + > + $ make andes_ae350_45_defconfig > + > +If you want to customize your configuration: > + > + $ make menuconfig > + > +Build everything > +---------------- > +Note: you will need to access to the network, since Buildroot will > +download the packages' sources. > + > + $ make > + > +Result of the build > +------------------- > + > +After building, you should obtain the following files: > + > + output/images/ > + |-- Image > + |-- ae350.dtb > + |-- boot.scr > + |-- boot.vfat > + |-- fw_dynamic.bin > + |-- fw_dynamic.elf > + |-- fw_jump.bin > + |-- fw_jump.elf > + |-- rootfs.ext2 > + |-- rootfs.ext4 -> rootfs.ext2 > + |-- sdcard.img > + |-- u-boot-spl.bin > + `-- u-boot.itb > + > +Copy the sdcard.img to a SD card with "dd": > + > + $ sudo dd if=sdcard.img of=/dev/sdX bs=4096 Here please add: $ sudo sync > + > +Your SD card partition should be: > + > + Disk /dev/mmcblk0: 31457280 sectors, 3072M > + Logical sector size: 512 > + Disk identifier (GUID): 546663ee-d2f1-427f-93a5-5c7b69dd801c > + Partition table holds up to 128 entries > + First usable sector is 34, last usable sector is 385062 > + > + Number Start (sector) End (sector) Size Name > + 1 34 262177 128M u-boot > + 2 262178 385057 60.0M rootfs > + > +Insert SD card and reset the board, should boot Linux from mmc. "it should boot..." > diff --git a/board/andes/ae350/uboot.config.fragment b/board/andes/ae350/uboot.config.fragment > new file mode 100644 > index 0000000000..4992d712a5 > --- /dev/null > +++ b/board/andes/ae350/uboot.config.fragment > @@ -0,0 +1,5 @@ > +CONFIG_SPL_FS_FAT=y > +CONFIG_SPL_MMC=y > +# CONFIG_SPL_RAM_SUPPORT is not set > +# CONFIG_OF_BOARD is not set > +CONFIG_OF_SEPARATE=y > diff --git a/configs/andes_ae350_45_defconfig b/configs/andes_ae350_45_defconfig > new file mode 100644 > index 0000000000..b8f91e50b3 > --- /dev/null > +++ b/configs/andes_ae350_45_defconfig > @@ -0,0 +1,40 @@ > +BR2_riscv=y > +BR2_riscv_custom=y > +BR2_RISCV_ISA_CUSTOM_RVM=y > +BR2_RISCV_ISA_CUSTOM_RVF=y > +BR2_RISCV_ISA_CUSTOM_RVD=y > +BR2_RISCV_ISA_CUSTOM_RVC=y > +BR2_GLOBAL_PATCH_DIR="board/andes/ae350/patches" > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y > +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" > +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" > +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/andes/ae350/genimage_sdcard.cfg" > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,andestech,linux,591f3f73757ab80b46e7e1e10067ce3c82ff83a9)/linux-591f3f73757ab80b46e7e1e10067ce3c82ff83a9.tar.gz" > +BR2_LINUX_KERNEL_DEFCONFIG="ae350_rv64_smp" > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/andes/ae350/ae350.dts" > +BR2_TARGET_ROOTFS_EXT2=y > +BR2_TARGET_ROOTFS_EXT2_4=y > +# BR2_TARGET_ROOTFS_TAR is not set > +BR2_TARGET_OPENSBI=y > +BR2_TARGET_OPENSBI_PLAT="andes/ae350" > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > +BR2_TARGET_UBOOT_CUSTOM_VERSION=y > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01" > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ae350_rv64_spl_xip" > +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/andes/ae350/uboot.config.fragment" I've just built your defconfig using gitlab-ci docker but it fails because you need to add also: BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y > +BR2_TARGET_UBOOT_NEEDS_OPENSBI=y > +# BR2_TARGET_UBOOT_FORMAT_BIN is not set > +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y > +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" > +BR2_TARGET_UBOOT_SPL=y > +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="ARCH_FLAGS=-march=rv64imafdc" > +BR2_PACKAGE_HOST_DOSFSTOOLS=y > +BR2_PACKAGE_HOST_GENIMAGE=y > +BR2_PACKAGE_HOST_MTOOLS=y > +BR2_PACKAGE_HOST_UBOOT_TOOLS=y > +BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y > +BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/andes/ae350/boot.cmd" For the rest it looks good to me. So I wait the V3 from you. Thank you! Best regards -- Giulio Benetti Benetti Engineering sas _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH v2 3/3] DEVELOPERS: add Yu-Chien Lin to board/andes 2022-01-25 5:49 [Buildroot] [PATCH v2 1/3] board/andes: rearrange nds32 folder structure Yu Chien Peter Lin 2022-01-25 5:49 ` [Buildroot] [PATCH v2 2/3] board/andes/ae350: add support for Andes AE350 Yu Chien Peter Lin @ 2022-01-25 5:49 ` Yu Chien Peter Lin 2022-02-09 23:09 ` Giulio Benetti 2022-02-09 22:58 ` [Buildroot] [PATCH v2 1/3] board/andes: rearrange nds32 folder structure Giulio Benetti 2 siblings, 1 reply; 8+ messages in thread From: Yu Chien Peter Lin @ 2022-01-25 5:49 UTC (permalink / raw) To: buildroot; +Cc: Yu Chien Peter Lin, alankao Nylon is no longer at Andes. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Signed-off-by: Alan Kao <alankao@andestech.com> --- DEVELOPERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/DEVELOPERS b/DEVELOPERS index dc810b6fe1..b191734d5a 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2137,10 +2137,11 @@ N: Norbert Lange <nolange79@gmail.com> F: package/systemd/ F: package/tcf-agent/ -N: Nylon Chen <nylon7@andestech.com> +N: Yu Chien Peter Lin <peterlin@andestech.com> F: arch/Config.in.nds32 F: board/andes F: configs/andes_ae3xx_defconfig +F: configs/andes_ae350_45_defconfig F: toolchain/toolchain-external/toolchain-external-andes-nds32/ N: Olaf Rempel <razzor@kopf-tisch.de> -- 2.17.1 _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [Buildroot] [PATCH v2 3/3] DEVELOPERS: add Yu-Chien Lin to board/andes 2022-01-25 5:49 ` [Buildroot] [PATCH v2 3/3] DEVELOPERS: add Yu-Chien Lin to board/andes Yu Chien Peter Lin @ 2022-02-09 23:09 ` Giulio Benetti 2022-02-15 2:13 ` Yu Chien Peter Lin 0 siblings, 1 reply; 8+ messages in thread From: Giulio Benetti @ 2022-02-09 23:09 UTC (permalink / raw) To: Yu Chien Peter Lin, buildroot; +Cc: alankao Hi Peter, On 25/01/22 06:49, Yu Chien Peter Lin wrote: > Nylon is no longer at Andes. > > Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> > Signed-off-by: Alan Kao <alankao@andestech.com> > --- > DEVELOPERS | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/DEVELOPERS b/DEVELOPERS > index dc810b6fe1..b191734d5a 100644 > --- a/DEVELOPERS > +++ b/DEVELOPERS > @@ -2137,10 +2137,11 @@ N: Norbert Lange <nolange79@gmail.com> > F: package/systemd/ > F: package/tcf-agent/ > > -N: Nylon Chen <nylon7@andestech.com> > +N: Yu Chien Peter Lin <peterlin@andestech.com> > F: arch/Config.in.nds32 > F: board/andes > F: configs/andes_ae3xx_defconfig > +F: configs/andes_ae350_45_defconfig This ^^^ line goes before its previous one for alphabetical order > F: toolchain/toolchain-external/toolchain-external-andes-nds32/ > > N: Olaf Rempel <razzor@kopf-tisch.de> Best regards -- Giulio Benetti Benetti Engineering sas _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Buildroot] [PATCH v2 3/3] DEVELOPERS: add Yu-Chien Lin to board/andes 2022-02-09 23:09 ` Giulio Benetti @ 2022-02-15 2:13 ` Yu Chien Peter Lin 2022-02-15 2:22 ` Giulio Benetti 0 siblings, 1 reply; 8+ messages in thread From: Yu Chien Peter Lin @ 2022-02-15 2:13 UTC (permalink / raw) To: Giulio Benetti; +Cc: alankao, buildroot Hi Giulio, Thanks for your comments. > On Thu, Feb 10, 2022 at 12:39:07AM +0100, Giulio Benetti wrote: > > Hi Peter, > > > > I review it now, > > > > On 25/01/22 06:49, Yu Chien Peter Lin wrote: > > > This patch provides defconfig and basic support for the Andes > > > 45 series RISC-V architecture. > > > > > > Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> > > > Signed-off-by: Alan Kao <alankao@andestech.com> > ... > > > create mode 100644 board/andes/ae350/patches/opensbi/0001-Disable-PIC-explicitly-for-assembling.patch > > > create mode 100644 board/andes/ae350/patches/opensbi/0002-Enable-cache-for-opensbi-jump-mode.patch > > > create mode 100644 board/andes/ae350/patches/uboot/0001-Fix-mmc-no-partition-table-error.patch > > > create mode 100644 board/andes/ae350/patches/uboot/0002-Prevent-fw_dynamic-from-relocation.patch > > > create mode 100644 board/andes/ae350/patches/uboot/0003-Fix-u-boot-proper-booting-issue.patch > > > create mode 100644 board/andes/ae350/patches/uboot/0004-Enable-printing-OpenSBI-boot-logo.patch > > > > Would it be possible for you to upstream these patches? I mean, do you > > maintain the uboot, opensbi repositories so you can do that? > > If yes it would be great having no patches at all here. We have a plan to upstream some of them if the patch is platform specific. I'll remove them when the u-boot bumps to the future version. > > > index 0000000000..5e5d70ab25 > > > --- /dev/null > > > +++ b/board/andes/ae350/ae350.dts > ... > > It's a bit out of topic, but with this .dts ^^^ you define and entire > > SoC+board, shouldn't it be like a .dtsi file for SoC and a .dts file for > > board? We would like to remain in this form until new board is available. Thanks. Regards, Yu-Chien Peter Lin _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Buildroot] [PATCH v2 3/3] DEVELOPERS: add Yu-Chien Lin to board/andes 2022-02-15 2:13 ` Yu Chien Peter Lin @ 2022-02-15 2:22 ` Giulio Benetti 0 siblings, 0 replies; 8+ messages in thread From: Giulio Benetti @ 2022-02-15 2:22 UTC (permalink / raw) To: Yu Chien Peter Lin; +Cc: alankao, buildroot Hi Peter, On 15/02/22 03:13, Yu Chien Peter Lin wrote: > Hi Giulio, > > Thanks for your comments. > >> On Thu, Feb 10, 2022 at 12:39:07AM +0100, Giulio Benetti wrote: >>> Hi Peter, >>> >>> I review it now, >>> >>> On 25/01/22 06:49, Yu Chien Peter Lin wrote: >>>> This patch provides defconfig and basic support for the Andes >>>> 45 series RISC-V architecture. >>>> >>>> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> >>>> Signed-off-by: Alan Kao <alankao@andestech.com> >> ... >>>> create mode 100644 board/andes/ae350/patches/opensbi/0001-Disable-PIC-explicitly-for-assembling.patch >>>> create mode 100644 board/andes/ae350/patches/opensbi/0002-Enable-cache-for-opensbi-jump-mode.patch >>>> create mode 100644 board/andes/ae350/patches/uboot/0001-Fix-mmc-no-partition-table-error.patch >>>> create mode 100644 board/andes/ae350/patches/uboot/0002-Prevent-fw_dynamic-from-relocation.patch >>>> create mode 100644 board/andes/ae350/patches/uboot/0003-Fix-u-boot-proper-booting-issue.patch >>>> create mode 100644 board/andes/ae350/patches/uboot/0004-Enable-printing-OpenSBI-boot-logo.patch >>> >>> Would it be possible for you to upstream these patches? I mean, do you >>> maintain the uboot, opensbi repositories so you can do that? >>> If yes it would be great having no patches at all here. > > We have a plan to upstream some of them if the patch is platform specific. This sounds good > I'll remove them when the u-boot bumps to the future version. That's ok >>>> index 0000000000..5e5d70ab25 >>>> --- /dev/null >>>> +++ b/board/andes/ae350/ae350.dts >> ... >>> It's a bit out of topic, but with this .dts ^^^ you define and entire >>> SoC+board, shouldn't it be like a .dtsi file for SoC and a .dts file for >>> board? > > We would like to remain in this form until new board is available. Thanks. Ok, with some new board on the horizon it makes sense to me. Best regards -- Giulio Benetti Benetti Engineering sas _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Buildroot] [PATCH v2 1/3] board/andes: rearrange nds32 folder structure 2022-01-25 5:49 [Buildroot] [PATCH v2 1/3] board/andes: rearrange nds32 folder structure Yu Chien Peter Lin 2022-01-25 5:49 ` [Buildroot] [PATCH v2 2/3] board/andes/ae350: add support for Andes AE350 Yu Chien Peter Lin 2022-01-25 5:49 ` [Buildroot] [PATCH v2 3/3] DEVELOPERS: add Yu-Chien Lin to board/andes Yu Chien Peter Lin @ 2022-02-09 22:58 ` Giulio Benetti 2 siblings, 0 replies; 8+ messages in thread From: Giulio Benetti @ 2022-02-09 22:58 UTC (permalink / raw) To: Yu Chien Peter Lin, buildroot; +Cc: alankao Hi Peter, On 25/01/22 06:49, Yu Chien Peter Lin wrote: I would add also: "Rearrange nds32 folder structure to add different boards"(or SoCs) > Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> > Signed-off-by: Alan Kao <alankao@andestech.com> > --- > .../patches/linux/0001-nds32-Fix-boot-messages-garbled.patch | 0 > board/andes/{ => ae3xx}/readme.txt | 0 > configs/andes_ae3xx_defconfig | 2 +- > 3 files changed, 1 insertion(+), 1 deletion(-) > rename board/andes/{ => ae3xx}/patches/linux/0001-nds32-Fix-boot-messages-garbled.patch (100%) > rename board/andes/{ => ae3xx}/readme.txt (100%) > > diff --git a/board/andes/patches/linux/0001-nds32-Fix-boot-messages-garbled.patch b/board/andes/ae3xx/patches/linux/0001-nds32-Fix-boot-messages-garbled.patch > similarity index 100% > rename from board/andes/patches/linux/0001-nds32-Fix-boot-messages-garbled.patch > rename to board/andes/ae3xx/patches/linux/0001-nds32-Fix-boot-messages-garbled.patch > diff --git a/board/andes/readme.txt b/board/andes/ae3xx/readme.txt > similarity index 100% > rename from board/andes/readme.txt > rename to board/andes/ae3xx/readme.txt > diff --git a/configs/andes_ae3xx_defconfig b/configs/andes_ae3xx_defconfig > index 52634caa50..18051115c3 100644 > --- a/configs/andes_ae3xx_defconfig > +++ b/configs/andes_ae3xx_defconfig > @@ -1,5 +1,5 @@ > BR2_nds32=y > -BR2_GLOBAL_PATCH_DIR="board/andes/patches/" > +BR2_GLOBAL_PATCH_DIR="board/andes/ae3xx/patches" > BR2_TOOLCHAIN_EXTERNAL=y > BR2_TOOLCHAIN_EXTERNAL_ANDES_NDS32=y > BR2_LINUX_KERNEL=y Best regards -- Giulio Benetti Benetti Engineering sas _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-02-15 2:22 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-01-25 5:49 [Buildroot] [PATCH v2 1/3] board/andes: rearrange nds32 folder structure Yu Chien Peter Lin 2022-01-25 5:49 ` [Buildroot] [PATCH v2 2/3] board/andes/ae350: add support for Andes AE350 Yu Chien Peter Lin 2022-02-09 23:39 ` Giulio Benetti 2022-01-25 5:49 ` [Buildroot] [PATCH v2 3/3] DEVELOPERS: add Yu-Chien Lin to board/andes Yu Chien Peter Lin 2022-02-09 23:09 ` Giulio Benetti 2022-02-15 2:13 ` Yu Chien Peter Lin 2022-02-15 2:22 ` Giulio Benetti 2022-02-09 22:58 ` [Buildroot] [PATCH v2 1/3] board/andes: rearrange nds32 folder structure Giulio Benetti
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox