From: "Yann E. MORIN" <yann.morin.1998@free.fr>
To: "Frager, Neal" <neal.frager@amd.com>
Cc: "Simek, Michal" <michal.simek@amd.com>,
"Erkiaga Elorza, Ibai" <ibai.erkiaga-elorza@amd.com>,
"luca.ceresoli@bootlin.com" <luca.ceresoli@bootlin.com>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Neal Frager via buildroot <buildroot@buildroot.org>
Subject: Re: [Buildroot] [PATCH v6 03/10] package/newlib-bare-metal: new package
Date: Wed, 15 Nov 2023 19:12:43 +0100 [thread overview]
Message-ID: <20231115181243.GK996011@scaer> (raw)
In-Reply-To: <CH2PR12MB50048B7684BF4AB7C79CC87DF0B2A@CH2PR12MB5004.namprd12.prod.outlook.com>
Neal, All,
On 2023-11-14 05:47 +0000, Frager, Neal via buildroot spake thusly:
[--SNIP--]
> I finally got the time to get back on this, but there appears to be another issue.
> When I use the following for installing the newlib in the sysroot staging area:
> NEWLIB_BARE_METAL_INSTALL_STAGING_OPTS = \
> DESTDIR=$(HOST_GCC_BARE_METAL_SYSROOT) \
> Install
> I get the following error message:
> /usr/bin/install: cannot create regular file '/buildroot/output/host/microblazeel-xilinx-elf/sysroot/usr/microblazeel-xilinx-elf/lib': No such file or directory
I had a very quick glance at the newlib Makefile, and it seems it might
not be totally parallel-safe, especially for installation, so maybe:
NEWLIB_BARE_METAL_MAKE = $(MAKE1)
Can you try that, please?
> This is because newlib tries to install libraries to this directory before the autotools runs the following command later on:
> /usr/bin/mkdir -p '/buildroot/output/host/microblazeel-xilinx-elf/sysroot/usr/microblazeel-xilinx-elf/lib'
>
> I have a hack solution by manually doing the mkdir in advance, but this should not be needed.
> The autotools should make all the directories that are needed for the install.
The issue is that newlib is not really an autotools package: the
Makefile is generated from Makefile.in, itself generated by autogen
(https://www.gnu.org/software/autogen/) which, AFAIK, is not part of the
autotools suite.
So, newlib uses autoconf, but does not use automake, and thus uses a
custom Makefile template, which might explain why it is not
parallel-safe.
Regards,
Yann E. MORIN.
> Would you be able to look at the pkg-autotools to see if we can fix this problem at its root by creating the lib directory from the beginning of install_staging?
>
> Thank you for your help!
>
> Best regards,
> Neal Frager
> AMD
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
next prev parent reply other threads:[~2023-11-15 18:12 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-20 11:42 [Buildroot] [PATCH v6 01/10] package/binutils-bare-metal: new package Neal Frager via buildroot
2023-10-20 11:42 ` [Buildroot] [PATCH v6 02/10] package/gcc-bare-metal: " Neal Frager via buildroot
2023-10-26 16:06 ` Luca Ceresoli via buildroot
2023-10-31 12:41 ` Thomas Petazzoni via buildroot
2023-10-20 11:42 ` [Buildroot] [PATCH v6 03/10] package/newlib-bare-metal: " Neal Frager via buildroot
2023-10-26 16:07 ` Luca Ceresoli via buildroot
2023-10-31 12:43 ` Thomas Petazzoni via buildroot
2023-11-01 11:43 ` Frager, Neal via buildroot
2023-11-01 11:50 ` Thomas Petazzoni via buildroot
2023-11-01 13:23 ` Frager, Neal via buildroot
2023-11-01 13:42 ` Yann E. MORIN
2023-11-02 9:35 ` Frager, Neal via buildroot
2023-11-02 9:37 ` Thomas Petazzoni via buildroot
2023-11-02 10:27 ` Frager, Neal via buildroot
2023-11-14 5:47 ` Frager, Neal via buildroot
2023-11-15 18:12 ` Yann E. MORIN [this message]
2023-11-16 10:20 ` Frager, Neal via buildroot
2023-11-16 11:32 ` Frager, Neal via buildroot
2023-10-31 12:52 ` Thomas Petazzoni via buildroot
2023-10-20 11:42 ` [Buildroot] [PATCH v6 04/10] toolchain/toolchain-bare-metal-buildroot: new toolchain Neal Frager via buildroot
2023-10-26 16:07 ` Luca Ceresoli via buildroot
2023-10-31 12:51 ` Thomas Petazzoni via buildroot
2023-11-02 9:47 ` Frager, Neal via buildroot
2023-10-20 11:42 ` [Buildroot] [PATCH v6 05/10] boot/zynqmp-firmware: new boot firmware Neal Frager via buildroot
2023-10-26 16:07 ` Luca Ceresoli via buildroot
2023-10-31 12:54 ` Thomas Petazzoni via buildroot
2023-10-31 19:07 ` Frager, Neal via buildroot
2023-11-01 9:24 ` Thomas Petazzoni via buildroot
2023-11-01 10:18 ` Frager, Neal via buildroot
2023-10-20 11:42 ` [Buildroot] [PATCH v6 06/10] boot/uboot.mk: new zynqmp pmufw build option Neal Frager via buildroot
2023-10-26 16:07 ` Luca Ceresoli via buildroot
2023-10-20 11:42 ` [Buildroot] [PATCH v6 07/10] configs/zynqmp*: build pmufw source Neal Frager via buildroot
2023-10-26 16:07 ` Luca Ceresoli via buildroot
2023-10-20 11:42 ` [Buildroot] [PATCH v6 08/10] boot/versal-firmware: new boot firmware Neal Frager via buildroot
2023-10-26 16:08 ` Luca Ceresoli via buildroot
2023-10-31 12:57 ` Thomas Petazzoni via buildroot
2023-10-20 11:42 ` [Buildroot] [PATCH v6 09/10] configs/versal_vck190_defconfig: build plm and psmfw source Neal Frager via buildroot
2023-10-26 16:08 ` Luca Ceresoli via buildroot
2023-10-20 11:42 ` [Buildroot] [PATCH v6 10/10] package/versal-firmware: remove package Neal Frager via buildroot
2023-10-26 16:08 ` Luca Ceresoli via buildroot
2023-10-26 11:59 ` [Buildroot] [PATCH v6 01/10] package/binutils-bare-metal: new package Frager, Neal via buildroot
2023-10-26 16:06 ` Luca Ceresoli via buildroot
2023-10-31 7:32 ` Frager, Neal via buildroot
2023-10-31 12:37 ` Thomas Petazzoni via buildroot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231115181243.GK996011@scaer \
--to=yann.morin.1998@free.fr \
--cc=buildroot@buildroot.org \
--cc=ibai.erkiaga-elorza@amd.com \
--cc=luca.ceresoli@bootlin.com \
--cc=michal.simek@amd.com \
--cc=neal.frager@amd.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox