* [Buildroot] udev 182: scsi/scsi.h not found
@ 2014-02-21 19:37 Marco Trapanese
2014-02-21 21:01 ` Peter Korsgaard
2014-02-24 10:42 ` Jérôme Pouiller
0 siblings, 2 replies; 6+ messages in thread
From: Marco Trapanese @ 2014-02-21 19:37 UTC (permalink / raw)
To: buildroot
Hi all!
I'm still learning and I was able to fix several issue by myself.
Anyway my first buildroot compilation is not completed yet!
The building of udev 182 ends with the following error:
src/ata_id/ata_id.c:32:23: fatal error: scsi/scsi.h: File o directory
non esistente
#include <scsi/scsi.h>
^
compilation terminated.
make[3]: *** [src/ata_id/ata_id.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [all-recursive] Error 1
make[1]: *** [all] Error 2
grep -rn 'scsi' package/ leads to the package libiscsi but selecting it
doesn't fix the problem.
Thus I'm asking again an hint to put me on the right way.....
Thanks!
Marco
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] udev 182: scsi/scsi.h not found
2014-02-21 19:37 [Buildroot] udev 182: scsi/scsi.h not found Marco Trapanese
@ 2014-02-21 21:01 ` Peter Korsgaard
2014-02-21 21:17 ` Marco Trapanese
2014-02-24 10:42 ` Jérôme Pouiller
1 sibling, 1 reply; 6+ messages in thread
From: Peter Korsgaard @ 2014-02-21 21:01 UTC (permalink / raw)
To: buildroot
>>>>> "Marco" == Marco Trapanese <marcotrapanese@gmail.com> writes:
> Hi all!
> I'm still learning and I was able to fix several issue by myself.
> Anyway my first buildroot compilation is not completed yet!
> The building of udev 182 ends with the following error:
> src/ata_id/ata_id.c:32:23: fatal error: scsi/scsi.h: File o directory
> non esistente
> #include <scsi/scsi.h>
> ^
> compilation terminated.
> make[3]: *** [src/ata_id/ata_id.o] Error 1
> make[3]: *** Waiting for unfinished jobs....
> make[2]: *** [all-recursive] Error 1
> make[1]: *** [all] Error 2
What toolchain / .config are you using? uClibc (default for the internal
toolchain) provides scsi/scsi.h
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] udev 182: scsi/scsi.h not found
2014-02-21 21:01 ` Peter Korsgaard
@ 2014-02-21 21:17 ` Marco Trapanese
2014-02-21 22:59 ` Thomas Petazzoni
0 siblings, 1 reply; 6+ messages in thread
From: Marco Trapanese @ 2014-02-21 21:17 UTC (permalink / raw)
To: buildroot
Il 21/02/2014 22:01, Peter Korsgaard ha scritto:
> What toolchain / .config are you using? uClibc (default for the internal
> toolchain) provides scsi/scsi.h
I'm using eglibc because I need the eglfs support. Currently I'm trying
to use the internal toolchain just to see if it builds successfully.
Likely the next shot will be the linaro toolchain (it's for a imx6 board).
Best regards
Marco
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] udev 182: scsi/scsi.h not found
2014-02-21 21:17 ` Marco Trapanese
@ 2014-02-21 22:59 ` Thomas Petazzoni
0 siblings, 0 replies; 6+ messages in thread
From: Thomas Petazzoni @ 2014-02-21 22:59 UTC (permalink / raw)
To: buildroot
Dear Marco Trapanese,
On Fri, 21 Feb 2014 22:17:25 +0100, Marco Trapanese wrote:
> Il 21/02/2014 22:01, Peter Korsgaard ha scritto:
> > What toolchain / .config are you using? uClibc (default for the internal
> > toolchain) provides scsi/scsi.h
>
> I'm using eglibc because I need the eglfs support. Currently I'm trying
> to use the internal toolchain just to see if it builds successfully.
> Likely the next shot will be the linaro toolchain (it's for a imx6 board).
When you report a build error, you should always :
1) Ensure that the build error can be reproduced after a "make clean;
make" cycle.
2) Provide your Buildroot .config file as well as the exact Buildroot
version you're using.
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] udev 182: scsi/scsi.h not found
2014-02-21 19:37 [Buildroot] udev 182: scsi/scsi.h not found Marco Trapanese
2014-02-21 21:01 ` Peter Korsgaard
@ 2014-02-24 10:42 ` Jérôme Pouiller
2014-02-24 11:18 ` Marco Trapanese
1 sibling, 1 reply; 6+ messages in thread
From: Jérôme Pouiller @ 2014-02-24 10:42 UTC (permalink / raw)
To: buildroot
Hello,
On Friday 21 February 2014 20:37:51 Marco Trapanese wrote:
> Hi all!
> I'm still learning and I was able to fix several issue by myself.
> Anyway my first buildroot compilation is not completed yet!
>
> The building of udev 182 ends with the following error:
>
> src/ata_id/ata_id.c:32:23: fatal error: scsi/scsi.h: File o directory
> non esistente
> #include <scsi/scsi.h>
I already noticed this problem. It happends when linux-headers is rebuilt
after libc (during its installation, linux-headers remove include/scsi/).
You can simply rebuild your toolchain or just do a "make clean".
--
J?r?me Pouiller, Sysmic
Embedded Linux specialist
http://www.sysmic.fr
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] udev 182: scsi/scsi.h not found
2014-02-24 10:42 ` Jérôme Pouiller
@ 2014-02-24 11:18 ` Marco Trapanese
0 siblings, 0 replies; 6+ messages in thread
From: Marco Trapanese @ 2014-02-24 11:18 UTC (permalink / raw)
To: buildroot
Il 24/02/2014 11:42, J?r?me Pouiller ha scritto:
> I already noticed this problem. It happends when linux-headers is
> rebuilt after libc (during its installation, linux-headers remove
> include/scsi/). You can simply rebuild your toolchain or just do a
> "make clean".
In fact I've just finished a full rebuild and now there are no errors!
Thanks
Marco
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-02-24 11:18 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-02-21 19:37 [Buildroot] udev 182: scsi/scsi.h not found Marco Trapanese
2014-02-21 21:01 ` Peter Korsgaard
2014-02-21 21:17 ` Marco Trapanese
2014-02-21 22:59 ` Thomas Petazzoni
2014-02-24 10:42 ` Jérôme Pouiller
2014-02-24 11:18 ` Marco Trapanese
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox