Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [Buildroot] eUdev Label Issues
@ 2015-08-13  2:07 Christian Stewart
  2015-08-24 21:16 ` Arnout Vandecappelle
  0 siblings, 1 reply; 2+ messages in thread
From: Christian Stewart @ 2015-08-13  2:07 UTC (permalink / raw)
  To: buildroot

Hi all,

I'm using buildroot to compile a system for an odroid XU4.

Here's my defconfig: http://pastebin.com/raw.php?i=ETU9d160

Seemingly randomly, my udev device labels will be messed up.

ls /dev/disk/by-label/
boot layer rogtfs swap

After a reboot there's a 50% chance it will be correct:

ls /dev/disk/by-label/
boot layer rootfs swap

I'm using an SD card with a msdos partition table made with gparted. I'm
using fat16, ext2, ext4, linux-swap for the partitions, respectively.

Any idea why this would happen? It's always rogtfs, once I saw layer
spelled daqer, and boot spelled bogt.

Thanks!
Christian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20150813/c3b4610f/attachment.html>

^ permalink raw reply	[flat|nested] 2+ messages in thread

* [Buildroot] eUdev Label Issues
  2015-08-13  2:07 [Buildroot] eUdev Label Issues Christian Stewart
@ 2015-08-24 21:16 ` Arnout Vandecappelle
  0 siblings, 0 replies; 2+ messages in thread
From: Arnout Vandecappelle @ 2015-08-24 21:16 UTC (permalink / raw)
  To: buildroot

On 08/13/2015 04:07 AM, Christian Stewart wrote:
> Hi all,
> 
> I'm using buildroot to compile a system for an odroid XU4.
> 
> Here's my defconfig: http://pastebin.com/raw.php?i=ETU9d160
> 
> Seemingly randomly, my udev device labels will be messed up.
> 
> ls /dev/disk/by-label/
> boot layer rogtfs swap
> 
> After a reboot there's a 50% chance it will be correct:
> 
> ls /dev/disk/by-label/
> boot layer rootfs swap
> 
> I'm using an SD card with a msdos partition table made with gparted. I'm using
> fat16, ext2, ext4, linux-swap for the partitions, respectively.
> 
> Any idea why this would happen? It's always rogtfs, once I saw layer spelled
> daqer, and boot spelled bogt.

 Note that all of these bitflips are in the same bit. So I guess you have a
hardware problem, possibly a timing issue..

 Regards,
 Arnout

> 
> Thanks!
> Christian
> 
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
> 


-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2015-08-24 21:16 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-08-13  2:07 [Buildroot] eUdev Label Issues Christian Stewart
2015-08-24 21:16 ` Arnout Vandecappelle

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox