* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel: atstk100x
@ 2009-01-29 9:33 ulf at uclibc.org
2009-01-29 9:38 ` Peter Korsgaard
0 siblings, 1 reply; 10+ messages in thread
From: ulf at uclibc.org @ 2009-01-29 9:33 UTC (permalink / raw)
To: buildroot
Author: ulf
Date: 2009-01-29 09:33:25 +0000 (Thu, 29 Jan 2009)
New Revision: 25114
Log:
Update atstk100x BSP
Added:
trunk/buildroot/target/device/Atmel/atstk100x/atstk100x-linux-2.6.27.12.config
trunk/buildroot/target/device/Atmel/atstk100x/atstk100x-linux-2.6.27.3.config
Modified:
trunk/buildroot/target/device/Atmel/atstk100x/atstk100x_defconfig
trunk/buildroot/target/device/Atmel/uClibc.config.avr32
Changeset:
Sorry, the patch is too large to include (2762 lines).
Please use ViewCVS to see it!
http://uclibc.org/cgi-bin/viewcvs.cgi?view=rev&root=svn&rev=25114
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel: atstk100x
2009-01-29 9:33 [Buildroot] svn commit: trunk/buildroot/target/device/Atmel: atstk100x ulf at uclibc.org
@ 2009-01-29 9:38 ` Peter Korsgaard
2009-01-29 9:43 ` Hans-Christian Egtvedt
0 siblings, 1 reply; 10+ messages in thread
From: Peter Korsgaard @ 2009-01-29 9:38 UTC (permalink / raw)
To: buildroot
>>>>> "ulf" == ulf <ulf@uclibc.org> writes:
ulf> Author: ulf
ulf> Date: 2009-01-29 09:33:25 +0000 (Thu, 29 Jan 2009)
ulf> New Revision: 25114
ulf> Log:
ulf> Update atstk100x BSP
ulf> Added:
ulf> trunk/buildroot/target/device/Atmel/atstk100x/atstk100x-linux-2.6.27.12.config
ulf> trunk/buildroot/target/device/Atmel/atstk100x/atstk100x-linux-2.6.27.3.config
Too configs for practically the same kernel version? That doesn't
sound right.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel: atstk100x
2009-01-29 9:38 ` Peter Korsgaard
@ 2009-01-29 9:43 ` Hans-Christian Egtvedt
2009-01-29 9:52 ` Peter Korsgaard
0 siblings, 1 reply; 10+ messages in thread
From: Hans-Christian Egtvedt @ 2009-01-29 9:43 UTC (permalink / raw)
To: buildroot
On Thu, 29 Jan 2009 10:38:14 +0100
Peter Korsgaard <jacmet@uclibc.org> wrote:
> >>>>> "ulf" == ulf <ulf@uclibc.org> writes:
<snipp>
> ulf> trunk/buildroot/target/device/Atmel/atstk100x/atstk100x-linux-2.6.27.12.config
> ulf> trunk/buildroot/target/device/Atmel/atstk100x/atstk100x-linux-2.6.27.3.config
>
> Too configs for practically the same kernel version? That doesn't
> sound right.
>
You can do "make atstk1005_defconfig" and similar for most of the AVR32
boards. The defconfig in the kernel is quite sane.
--
Best regards,
Hans-Christian Egtvedt
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel: atstk100x
2009-01-29 9:43 ` Hans-Christian Egtvedt
@ 2009-01-29 9:52 ` Peter Korsgaard
2009-01-29 9:59 ` Hans-Christian Egtvedt
2009-01-29 18:01 ` Ulf Samuelsson
0 siblings, 2 replies; 10+ messages in thread
From: Peter Korsgaard @ 2009-01-29 9:52 UTC (permalink / raw)
To: buildroot
>>>>> "Hans-Christian" == Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> writes:
>> Too configs for practically the same kernel version? That doesn't
>> sound right.
>>
Hans-Christian> You can do "make atstk1005_defconfig" and similar for
Hans-Christian> most of the AVR32 boards. The defconfig in the kernel
Hans-Christian> is quite sane.
So in other words these files should go away?
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel: atstk100x
2009-01-29 9:52 ` Peter Korsgaard
@ 2009-01-29 9:59 ` Hans-Christian Egtvedt
2009-01-29 18:01 ` Ulf Samuelsson
1 sibling, 0 replies; 10+ messages in thread
From: Hans-Christian Egtvedt @ 2009-01-29 9:59 UTC (permalink / raw)
To: buildroot
On Thu, 29 Jan 2009 10:52:58 +0100
Peter Korsgaard <jacmet@uclibc.org> wrote:
> >>>>> "Hans-Christian" == Hans-Christian Egtvedt
> >>>>> <hans-christian.egtvedt@atmel.com> writes:
>
> >> Too configs for practically the same kernel version? That doesn't
> >> sound right.
> >>
>
> Hans-Christian> You can do "make atstk1005_defconfig" and similar for
> Hans-Christian> most of the AVR32 boards. The defconfig in the kernel
> Hans-Christian> is quite sane.
>
> So in other words these files should go away?
>
A kernel config is only needed for the ngw100-base board, if that is
present in the upstream BR. I use the advanced Linux make stuff to grab
the kernel config from the already included defconfigs.
--
Best regards,
Hans-Christian Egtvedt
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel: atstk100x
2009-01-29 9:52 ` Peter Korsgaard
2009-01-29 9:59 ` Hans-Christian Egtvedt
@ 2009-01-29 18:01 ` Ulf Samuelsson
2009-01-30 8:09 ` Hans-Christian Egtvedt
1 sibling, 1 reply; 10+ messages in thread
From: Ulf Samuelsson @ 2009-01-29 18:01 UTC (permalink / raw)
To: buildroot
tor 2009-01-29 klockan 10:52 +0100 skrev Peter Korsgaard:
> >>>>> "Hans-Christian" == Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> writes:
>
> >> Too configs for practically the same kernel version? That doesn't
> >> sound right.
> >>
>
> Hans-Christian> You can do "make atstk1005_defconfig" and similar for
> Hans-Christian> most of the AVR32 boards. The defconfig in the kernel
> Hans-Christian> is quite sane.
>
> So in other words these files should go away?
>
These are example projects and the user is likely
to want to do things which are specific for his/her kernel.
That is easier to do if you set buildroot to use a configuration file.
If you set buildroot to use make defconfig, then the user
has to change some other configurations in buildroot
to allow change of configuration.
The way buildroot now works is that it will seek
for a config version which is smaller or equal
to that of the current kernel.
It is probably safe to remove the 2.6.7.3
BR
Ulf Samuelsson.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel: atstk100x
2009-01-29 18:01 ` Ulf Samuelsson
@ 2009-01-30 8:09 ` Hans-Christian Egtvedt
2009-01-30 8:52 ` Peter Korsgaard
2009-01-30 9:05 ` Ulf Samuelsson
0 siblings, 2 replies; 10+ messages in thread
From: Hans-Christian Egtvedt @ 2009-01-30 8:09 UTC (permalink / raw)
To: buildroot
On Thu, 29 Jan 2009 19:01:10 +0100
Ulf Samuelsson <ulf.samuelsson@atmel.com> wrote:
> tor 2009-01-29 klockan 10:52 +0100 skrev Peter Korsgaard:
> > >>>>> "Hans-Christian" == Hans-Christian Egtvedt
> > >>>>> <hans-christian.egtvedt@atmel.com> writes:
> >
> > >> Too configs for practically the same kernel version? That
> > >> doesn't sound right.
> > >>
> >
> > Hans-Christian> You can do "make atstk1005_defconfig" and similar
> > for Hans-Christian> most of the AVR32 boards. The defconfig in the
> > kernel Hans-Christian> is quite sane.
> >
> > So in other words these files should go away?
> >
>
> These are example projects and the user is likely
> to want to do things which are specific for his/her kernel.
>
> That is easier to do if you set buildroot to use a configuration file.
>
Why?
make linux26-menuconfig works fine.
> If you set buildroot to use make defconfig, then the user
> has to change some other configurations in buildroot
> to allow change of configuration.
>
Nope, see above.
> The way buildroot now works is that it will seek
> for a config version which is smaller or equal
> to that of the current kernel.
>
> It is probably safe to remove the 2.6.7.3
>
Hmm, sure, did that have anything to do with the AVR32 boards?
Linux v2.6.7.3 was never official supported by AVR32.
--
Best regards,
Hans-Christian Egtvedt
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel: atstk100x
2009-01-30 8:09 ` Hans-Christian Egtvedt
@ 2009-01-30 8:52 ` Peter Korsgaard
2009-01-30 9:05 ` Ulf Samuelsson
1 sibling, 0 replies; 10+ messages in thread
From: Peter Korsgaard @ 2009-01-30 8:52 UTC (permalink / raw)
To: buildroot
>>>>> "Hans-Christian" == Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> writes:
>> These are example projects and the user is likely
>> to want to do things which are specific for his/her kernel.
>>
>> That is easier to do if you set buildroot to use a configuration file.
>>
Hans-Christian> Why?
Hans-Christian> make linux26-menuconfig works fine.
Agreed.
>> It is probably safe to remove the 2.6.7.3
>>
Hans-Christian> Hmm, sure, did that have anything to do with the
Hans-Christian> AVR32 boards? Linux v2.6.7.3 was never official
Hans-Christian> supported by AVR32.
I guess there's a 2 missing, E.G. 2.6.27.3 ;)
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel: atstk100x
2009-01-30 8:09 ` Hans-Christian Egtvedt
2009-01-30 8:52 ` Peter Korsgaard
@ 2009-01-30 9:05 ` Ulf Samuelsson
2009-01-30 9:14 ` Hans-Christian Egtvedt
1 sibling, 1 reply; 10+ messages in thread
From: Ulf Samuelsson @ 2009-01-30 9:05 UTC (permalink / raw)
To: buildroot
fre 2009-01-30 klockan 09:09 +0100 skrev Hans-Christian Egtvedt:
> On Thu, 29 Jan 2009 19:01:10 +0100
> Ulf Samuelsson <ulf.samuelsson@atmel.com> wrote:
>
> > tor 2009-01-29 klockan 10:52 +0100 skrev Peter Korsgaard:
> > > >>>>> "Hans-Christian" == Hans-Christian Egtvedt
> > > >>>>> <hans-christian.egtvedt@atmel.com> writes:
> > >
> > > >> Too configs for practically the same kernel version? That
> > > >> doesn't sound right.
> > > >>
> > >
> > > Hans-Christian> You can do "make atstk1005_defconfig" and similar
> > > for Hans-Christian> most of the AVR32 boards. The defconfig in the
> > > kernel Hans-Christian> is quite sane.
> > >
> > > So in other words these files should go away?
> > >
> >
> > These are example projects and the user is likely
> > to want to do things which are specific for his/her kernel.
> >
> > That is easier to do if you set buildroot to use a configuration file.
> >
>
> Why?
>
> make linux26-menuconfig works fine.
>
> > If you set buildroot to use make defconfig, then the user
> > has to change some other configurations in buildroot
> > to allow change of configuration.
> >
>
> Nope, see above.
>
Try "make linux26-update" with that configuration...
BR
Ulf Samuelsson
> > The way buildroot now works is that it will seek
> > for a config version which is smaller or equal
> > to that of the current kernel.
> >
> > It is probably safe to remove the 2.6.7.3
> >
>
> Hmm, sure, did that have anything to do with the AVR32 boards?
> Linux v2.6.7.3 was never official supported by AVR32.
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] svn commit: trunk/buildroot/target/device/Atmel: atstk100x
2009-01-30 9:05 ` Ulf Samuelsson
@ 2009-01-30 9:14 ` Hans-Christian Egtvedt
0 siblings, 0 replies; 10+ messages in thread
From: Hans-Christian Egtvedt @ 2009-01-30 9:14 UTC (permalink / raw)
To: buildroot
On Fri, 30 Jan 2009 10:05:22 +0100
Ulf Samuelsson <ulf.samuelsson@atmel.com> wrote:
> fre 2009-01-30 klockan 09:09 +0100 skrev Hans-Christian Egtvedt:
> > On Thu, 29 Jan 2009 19:01:10 +0100
> > Ulf Samuelsson <ulf.samuelsson@atmel.com> wrote:
> >
<snipp>
> > > That is easier to do if you set buildroot to use a configuration
> > > file.
> > >
> >
> > Why?
> >
> > make linux26-menuconfig works fine.
> >
> > > If you set buildroot to use make defconfig, then the user
> > > has to change some other configurations in buildroot
> > > to allow change of configuration.
> > >
> >
> > Nope, see above.
> >
>
> Try "make linux26-update" with that configuration...
>
Then linux26-update is broken IMHO.
--
Best regards,
Hans-Christian Egtvedt
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2009-01-30 9:14 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-01-29 9:33 [Buildroot] svn commit: trunk/buildroot/target/device/Atmel: atstk100x ulf at uclibc.org
2009-01-29 9:38 ` Peter Korsgaard
2009-01-29 9:43 ` Hans-Christian Egtvedt
2009-01-29 9:52 ` Peter Korsgaard
2009-01-29 9:59 ` Hans-Christian Egtvedt
2009-01-29 18:01 ` Ulf Samuelsson
2009-01-30 8:09 ` Hans-Christian Egtvedt
2009-01-30 8:52 ` Peter Korsgaard
2009-01-30 9:05 ` Ulf Samuelsson
2009-01-30 9:14 ` Hans-Christian Egtvedt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox