* [Buildroot] [PATCH 1/3] configs: add support for the Raspberry Pi 5 board.
@ 2023-12-11 8:17 Christophe Blaess
2023-12-13 21:01 ` Yann E. MORIN
0 siblings, 1 reply; 5+ messages in thread
From: Christophe Blaess @ 2023-12-11 8:17 UTC (permalink / raw)
To: buildroot; +Cc: Christophe Blaess
The Raspberry Pi 5 defconfig is mostly inspired by the Raspberry
Pi 4 64-bits defconfig.
(sorry for possible double post, I had some issues with the email I
used for subscribing to the mailing list).
Signed-off-by: Christophe Blaess <christophe.blaess@logilin.fr>
---
configs/raspberrypi5_defconfig | 45 ++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 configs/raspberrypi5_defconfig
diff --git a/configs/raspberrypi5_defconfig b/configs/raspberrypi5_defconfig
new file mode 100644
index 0000000000..031f24a977
--- /dev/null
+++ b/configs/raspberrypi5_defconfig
@@ -0,0 +1,45 @@
+BR2_aarch64=y
+BR2_cortex_a76=y
+BR2_ARM_FPU_VFPV4=y
+
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+
+BR2_SYSTEM_DHCP="eth0"
+
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="bcm2712"
+
+# Build the DTB from the kernel sources
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2712-rpi-5-b"
+
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi5/config_5.txt"
+
+# Required tools to create the SD image
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+
+# Filesystem / image
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi5/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi5/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y
--
2.34.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [Buildroot] [PATCH 1/3] configs: add support for the Raspberry Pi 5 board.
2023-12-11 8:17 [Buildroot] [PATCH 1/3] configs: add support for the Raspberry Pi 5 board Christophe Blaess
@ 2023-12-13 21:01 ` Yann E. MORIN
2023-12-14 14:06 ` Christophe Blaess
0 siblings, 1 reply; 5+ messages in thread
From: Yann E. MORIN @ 2023-12-13 21:01 UTC (permalink / raw)
To: Christophe Blaess, Gaël PORTAY; +Cc: buildroot
Christophe, All,
+Gaël for almost simultaneous similar submission.
On 2023-12-11 09:17 +0100, Christophe Blaess spake thusly:
> The Raspberry Pi 5 defconfig is mostly inspired by the Raspberry
> Pi 4 64-bits defconfig.
>
>
> (sorry for possible double post, I had some issues with the email I
> used for subscribing to the mailing list).
>
> Signed-off-by: Christophe Blaess <christophe.blaess@logilin.fr>
This series is not correct: if we apply just the first patch, then the
config file will be missing: it should have been a single commit.
Besides, the change to rpi-firmware should have come first.
Gaël has sent another series about the rpi5:
https://patchwork.ozlabs.org/project/buildroot/list/?series=386144
Can you look at his patch and see what is missing compared to what you
did?
Regards,
Yann E. MORIN.
> ---
> configs/raspberrypi5_defconfig | 45 ++++++++++++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
> create mode 100644 configs/raspberrypi5_defconfig
>
> diff --git a/configs/raspberrypi5_defconfig b/configs/raspberrypi5_defconfig
> new file mode 100644
> index 0000000000..031f24a977
> --- /dev/null
> +++ b/configs/raspberrypi5_defconfig
> @@ -0,0 +1,45 @@
> +BR2_aarch64=y
> +BR2_cortex_a76=y
> +BR2_ARM_FPU_VFPV4=y
> +
> +BR2_TOOLCHAIN_BUILDROOT_CXX=y
> +
> +BR2_SYSTEM_DHCP="eth0"
> +
> +# Linux headers same as kernel, a 6.1 series
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
> +
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
> +BR2_LINUX_KERNEL_DEFCONFIG="bcm2712"
> +
> +# Build the DTB from the kernel sources
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2712-rpi-5-b"
> +
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +
> +BR2_PACKAGE_RPI_FIRMWARE=y
> +BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
> +BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi5/config_5.txt"
> +
> +# Required tools to create the SD image
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> +
> +# Filesystem / image
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> +# BR2_TARGET_ROOTFS_TAR is not set
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi5/post-build.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi5/post-image.sh"
> +
> +# Enable compressed kernel module support
> +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
> +BR2_PACKAGE_KMOD_TOOLS=y
> +BR2_PACKAGE_XZ=y
> +BR2_PACKAGE_KMOD=y
> +BR2_PACKAGE_HOST_KMOD_XZ=y
> --
> 2.34.1
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH 1/3] configs: add support for the Raspberry Pi 5 board.
@ 2023-12-11 8:14 Christophe Blaess
0 siblings, 0 replies; 5+ messages in thread
From: Christophe Blaess @ 2023-12-11 8:14 UTC (permalink / raw)
To: buildroot; +Cc: Christophe Blaess
The Raspberry Pi 5 defconfig is mostly inspired by the Raspberry
Pi 4 64-bits defconfig.
(sorry for possible double post, I had some issues with the email I
used for subscribing to the mailing list).
Signed-off-by: Christophe Blaess <christophe.blaess@logilin.fr>
---
configs/raspberrypi5_defconfig | 45 ++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 configs/raspberrypi5_defconfig
diff --git a/configs/raspberrypi5_defconfig b/configs/raspberrypi5_defconfig
new file mode 100644
index 0000000000..031f24a977
--- /dev/null
+++ b/configs/raspberrypi5_defconfig
@@ -0,0 +1,45 @@
+BR2_aarch64=y
+BR2_cortex_a76=y
+BR2_ARM_FPU_VFPV4=y
+
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+
+BR2_SYSTEM_DHCP="eth0"
+
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="bcm2712"
+
+# Build the DTB from the kernel sources
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2712-rpi-5-b"
+
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi5/config_5.txt"
+
+# Required tools to create the SD image
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+
+# Filesystem / image
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi5/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi5/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y
--
2.34.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-01-19 12:53 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-12-11 8:17 [Buildroot] [PATCH 1/3] configs: add support for the Raspberry Pi 5 board Christophe Blaess
2023-12-13 21:01 ` Yann E. MORIN
2023-12-14 14:06 ` Christophe Blaess
2024-01-19 12:53 ` Gaël PORTAY
-- strict thread matches above, loose matches on Subject: below --
2023-12-11 8:14 Christophe Blaess
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox