DAMON development mailing list
 help / color / mirror / Atom feed
From: SeongJae Park <sj@kernel.org>
Cc: SeongJae Park <sj@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	damon@lists.linux.dev, linux-kernel@vger.kernel.org,
	linux-mm@kvack.org
Subject: [RFC PATCH v1.1 13/13] mm/damon: remove damon_region->nr_accesses_bp
Date: Sat, 20 Jun 2026 10:22:43 -0700	[thread overview]
Message-ID: <20260620172244.90953-14-sj@kernel.org> (raw)
In-Reply-To: <20260620172244.90953-1-sj@kernel.org>

No code touches damon_region->nr_accesses_bp field.  Remove it.

Signed-off-by: SeongJae Park <sj@kernel.org>
---
 include/linux/damon.h | 10 ----------
 mm/damon/core.c       |  3 +--
 2 files changed, 1 insertion(+), 12 deletions(-)

diff --git a/include/linux/damon.h b/include/linux/damon.h
index 55a743d99b567..90d2910b3217a 100644
--- a/include/linux/damon.h
+++ b/include/linux/damon.h
@@ -47,8 +47,6 @@ struct damon_size_range {
  * @ar:			The address range of the region.
  * @sampling_addr:	Address of the sample for the next access check.
  * @nr_accesses:	Access frequency of this region.
- * @nr_accesses_bp:	@nr_accesses in basis point (0.01%) that updated for
- *			each sampling interval.
  * @probe_hits:		Number of probe-positive region samples.
  * @list:		List head for siblings.
  * @age:		Age of this region.
@@ -61,13 +59,6 @@ struct damon_size_range {
  * not be done with direct access but with the helper function,
  * damon_update_region_access_rate().
  *
- * @nr_accesses_bp is another representation of @nr_accesses in basis point
- * (1 in 10,000) that updated for every &damon_attrs->sample_interval in a
- * manner similar to moving sum.  By the algorithm, this value becomes
- * @nr_accesses * 10000 for every &struct damon_attrs->aggr_interval.  This can
- * be used when the aggregation interval is too huge and therefore cannot wait
- * for it before getting the access monitoring results.
- *
  * @age is initially zero, increased for each aggregation interval, and reset
  * to zero again if the access frequency is significantly changed.  If two
  * regions are merged into a new region, both @nr_accesses and @age of the new
@@ -77,7 +68,6 @@ struct damon_region {
 	struct damon_addr_range ar;
 	unsigned long sampling_addr;
 	unsigned int nr_accesses;
-	unsigned int nr_accesses_bp;
 	unsigned char probe_hits[DAMON_MAX_PROBES];
 	struct list_head list;
 
diff --git a/mm/damon/core.c b/mm/damon/core.c
index f96f54a7f178a..abccac9e9f9e8 100644
--- a/mm/damon/core.c
+++ b/mm/damon/core.c
@@ -3580,8 +3580,7 @@ static int kdamond_fn(void *data)
 				 * aggregation, and make aggregation
 				 * information reset for all regions.  Then,
 				 * following kdamond_reset_aggregated() call
-				 * will make the region information invalid,
-				 * particularly for ->nr_accesses_bp.
+				 * will make the region information invalid.
 				 *
 				 * Reset ->next_aggregation_sis to avoid that.
 				 * It will anyway correctly updated after this
-- 
2.47.3

      parent reply	other threads:[~2026-06-20 17:23 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-20 17:22 [RFC PATCH v1.1 00/13] mm/damon: optimize out nr_accesses_bp SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 01/13] mm/damon: introduce damon_nr_accesses_mvsum() SeongJae Park
2026-06-20 17:36   ` sashiko-bot
2026-06-20 17:39     ` SeongJae Park
2026-06-20 17:41       ` SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 02/13] mm/damon/tests/core-kunit: test damon_mvsum() SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 03/13] mm/damon/core: use damon_nr_accesses_mvsum() in __damos_valid_target() SeongJae Park
2026-06-20 17:41   ` sashiko-bot
2026-06-20 18:07     ` SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 04/13] mm/damon/core: use damon_nr_accesses_mvsum() for damos region tracing SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 05/13] mm/damon/sysfs-schemes: use damon_nr_accesses_mvsum() for damo regions SeongJae Park
2026-06-20 17:37   ` sashiko-bot
2026-06-20 18:19     ` SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 06/13] mm/damon/core: remove damon_warn_fix_nr_accesses_corruption() SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 07/13] mm/damon/core: remove damon_verify_reset_aggregated() SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 08/13] mm/damon/core: remove damon_verify_merge_regions_of() SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 09/13] mm/damon/tests/core-kunit: remove nr_accesses_bp setup and tests SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 10/13] selftests/damon/drgn_dump_damon_status: do not dump nr_accesses_bp SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 11/13] mm/damon/core: remove nr_accesses_bp setups and updates SeongJae Park
2026-06-20 17:34   ` sashiko-bot
2026-06-20 17:45     ` SeongJae Park
2026-06-20 18:20       ` SeongJae Park
2026-06-20 17:22 ` [RFC PATCH v1.1 12/13] mm/damon/core: remove damon_moving_sum() and its unit test SeongJae Park
2026-06-20 17:35   ` sashiko-bot
2026-06-20 17:47     ` SeongJae Park
2026-06-20 17:22 ` SeongJae Park [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260620172244.90953-14-sj@kernel.org \
    --to=sj@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=damon@lists.linux.dev \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox