[dm-crypt] cryptsetup with Python subprocess + pipes

[dm-crypt] cryptsetup with Python subprocess + pipes

[Police Terror]

Hello,

I'm trying to make a plausible deniability encryption wrapper around
cryptsetup.

Basically it uses a hash table to first lookup an offset (encrypted with
the password), then uses that offset to load a hidden volume within a
contiguous file (within which other volumes may or may not exist).

The theory is solid, and everything is mostly working. The only problem
I'm having is doing the communication in Python:

    # Format the volume
    pipe = subprocess.Popen(["cryptsetup", "luksFormat", loop_device],
                            stdout=subprocess.PIPE,
                            stdin=subprocess.PIPE)
    out = pipe.communicate(input=b"YES\n" + password)
    if pipe.returncode:
        error("Problem formatting volume.")
        return pipe.returncode

For some reason, this does not give any output! But the volume gets
created, but I cannot decrypt it with the password.

I don't want to save the password to disk, so I cannot use --key-file.

For some reason, this works with other commands, just not cryptsetup. I
think it is suppressing output and stopping me doing this. Why?

Any help?

Thanks.

Re: [dm-crypt] cryptsetup with Python subprocess + pipes (saout: to exclusive)

[Diagon]

On 06/23/2016 02:37 PM, Police Terror - PoliceTerror@dyne.org wrote:
> Hello,
>
> I'm trying to make a plausible deniability encryption wrapper around
> cryptsetup.
>
> [...]

Not what you're asking, but for this purpose, have you had a look at
dmsteg?  http://dmsteg.sourceforge.net/

/D

Re: [dm-crypt] cryptsetup with Python subprocess + pipes (saout: to exclusive)

[Police Terror]

dmsteg would be great but last updates are 2012 and my solution is way
simpler building off existing crypto primitives.

Diagon:
> On 06/23/2016 02:37 PM, Police Terror - PoliceTerror@dyne.org wrote:
>> Hello,
>>
>> I'm trying to make a plausible deniability encryption wrapper around
>> cryptsetup.
>>
>> [...]
> 
> Not what you're asking, but for this purpose, have you had a look at
> dmsteg?  http://dmsteg.sourceforge.net/
> 
> /D
> 
> _______________________________________________
> dm-crypt mailing list
> dm-crypt@saout.de
> http://www.saout.de/mailman/listinfo/dm-crypt
> 

Re: [dm-crypt] cryptsetup with Python subprocess + pipes

[Milan Broz]

On 06/23/2016 11:37 PM, Police Terror wrote:
> Hello,
> 
> I'm trying to make a plausible deniability encryption wrapper around
> cryptsetup.
> 
> Basically it uses a hash table to first lookup an offset (encrypted with
> the password), then uses that offset to load a hidden volume within a
> contiguous file (within which other volumes may or may not exist).
> 
> The theory is solid, and everything is mostly working. The only problem
> I'm having is doing the communication in Python:
> 
>     # Format the volume
>     pipe = subprocess.Popen(["cryptsetup", "luksFormat", loop_device],
>                             stdout=subprocess.PIPE,
>                             stdin=subprocess.PIPE)
>     out = pipe.communicate(input=b"YES\n" + password)
>     if pipe.returncode:
>         error("Problem formatting volume.")
>         return pipe.returncode
> 
> For some reason, this does not give any output! But the volume gets
> created, but I cannot decrypt it with the password.

Probably because if you use pipe, cryptsetup will switch to batch
mode where there is no question and no output.

It is better to add batch mode (-q switch) explicitly and remove from
"YES\n" from your script (otherwise it becomes password ;-).

There is also simple Python pycryptsetup wrapper (it doesn't cover all
commands though).

Milan

Re: [dm-crypt] cryptsetup with Python subprocess + pipes

[Police Terror]

Ahhh yes! Thank you Diagon and Milan.
I've added now the -q switch.

I looked at the pycryptsetup but 2 things:

1. It's not Python 3
2. It's an extra dependency and not in the repos.

Milan Broz:
> On 06/23/2016 11:37 PM, Police Terror wrote:
>> Hello,
>>
>> I'm trying to make a plausible deniability encryption wrapper around
>> cryptsetup.
>>
>> Basically it uses a hash table to first lookup an offset (encrypted with
>> the password), then uses that offset to load a hidden volume within a
>> contiguous file (within which other volumes may or may not exist).
>>
>> The theory is solid, and everything is mostly working. The only problem
>> I'm having is doing the communication in Python:
>>
>>     # Format the volume
>>     pipe = subprocess.Popen(["cryptsetup", "luksFormat", loop_device],
>>                             stdout=subprocess.PIPE,
>>                             stdin=subprocess.PIPE)
>>     out = pipe.communicate(input=b"YES\n" + password)
>>     if pipe.returncode:
>>         error("Problem formatting volume.")
>>         return pipe.returncode
>>
>> For some reason, this does not give any output! But the volume gets
>> created, but I cannot decrypt it with the password.
> 
> Probably because if you use pipe, cryptsetup will switch to batch
> mode where there is no question and no output.
> 
> It is better to add batch mode (-q switch) explicitly and remove from
> "YES\n" from your script (otherwise it becomes password ;-).
> 
> There is also simple Python pycryptsetup wrapper (it doesn't cover all
> commands though).
> 
> Milan
> _______________________________________________
> dm-crypt mailing list
> dm-crypt@saout.de
> http://www.saout.de/mailman/listinfo/dm-crypt
> 

Re: [dm-crypt] cryptsetup with Python subprocess + pipes

[Milan Broz]

On 06/24/2016 11:56 AM, Police Terror wrote:
> Ahhh yes! Thank you Diagon and Milan.
> I've added now the -q switch.
> 
> I looked at the pycryptsetup but 2 things:
> 
> 1. It's not Python 3
> 2. It's an extra dependency and not in the repos.

Fedora has both Python3 and 2 builds but other
distros do not compile it probably.

(It was designed for Anaconda installer mainly.)

Milan

Re: [dm-crypt] cryptsetup with Python subprocess + pipes

[Police Terror]

Here's the tool:

https://github.com/RojavaCrypto/hiddencrypt

Mostly proof of concept for now.

Would be cool in the future to work something better out by hacking
cryptsetup itself. Maybe if there's headerless volumes (that just look
like random data).

Multiple deniable Linux installs would be a killer feature.

Milan Broz:
> On 06/24/2016 11:56 AM, Police Terror wrote:
>> Ahhh yes! Thank you Diagon and Milan.
>> I've added now the -q switch.
>>
>> I looked at the pycryptsetup but 2 things:
>>
>> 1. It's not Python 3
>> 2. It's an extra dependency and not in the repos.
> 
> Fedora has both Python3 and 2 builds but other
> distros do not compile it probably.
> 
> (It was designed for Anaconda installer mainly.)
> 
> Milan
> _______________________________________________
> dm-crypt mailing list
> dm-crypt@saout.de
> http://www.saout.de/mailman/listinfo/dm-crypt
> 

Re: [dm-crypt] cryptsetup with Python subprocess + pipes

[Arno Wagner]

What I would like to see is a plausible deniability technique
that is not just a worthless tech-demo, but where the 
"plausible" part was actually well engineered with regards
to how things work in the real world and that is not limited
to a very small amount of steganographically hidden data.
So far, none exists.

The thing is, for an incompetent attacker it is already 
enough to just remove a partition from the partition table 
and re-create it at need in the same place. For a competent
attacker, the things that exist today just provide probable
cause that you are trying to hide something and hence make
things worse.

As it is, these tools are of negative worth, as they give 
users a false sense of security.

Also refer to FAQ 5.18 for my analysis of the status-quo.
The paper by Schneier et. al. I reference provides an 
excellent in-depth analysis of the problems with the idea 
of plausible deniability in a real OS environment.

Regards,
Arno

On Fri, Jun 24, 2016 at 14:16:05 CEST, Police Terror wrote:
> Here's the tool:
> 
> https://github.com/RojavaCrypto/hiddencrypt
> 
> Mostly proof of concept for now.
> 
> Would be cool in the future to work something better out by hacking
> cryptsetup itself. Maybe if there's headerless volumes (that just look
> like random data).
> 
> Multiple deniable Linux installs would be a killer feature.
> 
> Milan Broz:
> > On 06/24/2016 11:56 AM, Police Terror wrote:
> >> Ahhh yes! Thank you Diagon and Milan.
> >> I've added now the -q switch.
> >>
> >> I looked at the pycryptsetup but 2 things:
> >>
> >> 1. It's not Python 3
> >> 2. It's an extra dependency and not in the repos.
> > 
> > Fedora has both Python3 and 2 builds but other
> > distros do not compile it probably.
> > 
> > (It was designed for Anaconda installer mainly.)
> > 
> > Milan
> > _______________________________________________
> > dm-crypt mailing list
> > dm-crypt@saout.de
> > http://www.saout.de/mailman/listinfo/dm-crypt
> > 
> _______________________________________________
> dm-crypt mailing list
> dm-crypt@saout.de
> http://www.saout.de/mailman/listinfo/dm-crypt

-- 
Arno Wagner,     Dr. sc. techn., Dipl. Inform.,    Email: arno@wagner.name
GnuPG: ID: CB5D9718  FP: 12D6 C03B 1B30 33BB 13CF  B774 E35C 5FA1 CB5D 9718
----
A good decision is based on knowledge and not on numbers. -- Plato

If it's in the news, don't worry about it.  The very definition of 
"news" is "something that hardly ever happens." -- Bruce Schneier

Re: [dm-crypt] cryptsetup with Python subprocess + pipes

[Police Terror]

You obviously did not look at the example because the data is not hidden
steganographically.

The way it works is that you have a slab with multiple possible volumes
at various offsets. To decrypt a volume, you need to know the offset and
the password. An attacker cannot delete the volume because he does not
know the offset.

These offsets are stored in a hashmap array. The password is hashed
using scrypt, then the array is indexed. The value at that index is then
decrypted using the password to get the offset.

So all the user needs is a password. With that, the software can find
the index, use the password to get the volume's index within the slab
and then decrypt it.

About a well engineered solution: today I just found VeraCrypt which
actually works well. I encourage people to try it. It can create hidden
volumes.

Arno Wagner:
> What I would like to see is a plausible deniability technique
> that is not just a worthless tech-demo, but where the 
> "plausible" part was actually well engineered with regards
> to how things work in the real world and that is not limited
> to a very small amount of steganographically hidden data.
> So far, none exists.
> 
> The thing is, for an incompetent attacker it is already 
> enough to just remove a partition from the partition table 
> and re-create it at need in the same place. For a competent
> attacker, the things that exist today just provide probable
> cause that you are trying to hide something and hence make
> things worse.
> 
> As it is, these tools are of negative worth, as they give 
> users a false sense of security.
> 
> Also refer to FAQ 5.18 for my analysis of the status-quo.
> The paper by Schneier et. al. I reference provides an 
> excellent in-depth analysis of the problems with the idea 
> of plausible deniability in a real OS environment.
> 
> Regards,
> Arno
> 
> On Fri, Jun 24, 2016 at 14:16:05 CEST, Police Terror wrote:
>> Here's the tool:
>>
>> https://github.com/RojavaCrypto/hiddencrypt
>>
>> Mostly proof of concept for now.
>>
>> Would be cool in the future to work something better out by hacking
>> cryptsetup itself. Maybe if there's headerless volumes (that just look
>> like random data).
>>
>> Multiple deniable Linux installs would be a killer feature.
>>
>> Milan Broz:
>>> On 06/24/2016 11:56 AM, Police Terror wrote:
>>>> Ahhh yes! Thank you Diagon and Milan.
>>>> I've added now the -q switch.
>>>>
>>>> I looked at the pycryptsetup but 2 things:
>>>>
>>>> 1. It's not Python 3
>>>> 2. It's an extra dependency and not in the repos.
>>>
>>> Fedora has both Python3 and 2 builds but other
>>> distros do not compile it probably.
>>>
>>> (It was designed for Anaconda installer mainly.)
>>>
>>> Milan
>>> _______________________________________________
>>> dm-crypt mailing list
>>> dm-crypt@saout.de
>>> http://www.saout.de/mailman/listinfo/dm-crypt
>>>
>> _______________________________________________
>> dm-crypt mailing list
>> dm-crypt@saout.de
>> http://www.saout.de/mailman/listinfo/dm-crypt
> 

Re: [dm-crypt] cryptsetup with Python subprocess + pipes

[Arno Wagner]

On Fri, Jun 24, 2016 at 18:33:37 CEST, Police Terror wrote:
> You obviously did not look at the example because the data is not hidden
> steganographically.

You obviously did not understand what I wrote, because
I never claimed that in this case it was. I only claimed that
at this time this is the only valid known way to do plausible 
deniablility.

[...] 

> About a well engineered solution: today I just found VeraCrypt which
> actually works well. I encourage people to try it. It can create hidden
> volumes.

... and that have all the problems hidden volumes come with. 
They also managed to create additional problems TrueCrypt does
not have, for example a broken password "quality" assessment
that cannot be bypassed (alternatively you get a broken 
password iteration, that can lead to minutes of unlock time).
My trust in the VeraCrypt developers is much, much lower than
in the original TrueCrypt developers.

Seriously. Bright-eyed "can do" attitudes have no place in 
IT security. They do much more harm than good and they endanger
users.
 
Regards,
Arno

> Arno Wagner:
> > What I would like to see is a plausible deniability technique
> > that is not just a worthless tech-demo, but where the 
> > "plausible" part was actually well engineered with regards
> > to how things work in the real world and that is not limited
> > to a very small amount of steganographically hidden data.
> > So far, none exists.
> > 
> > The thing is, for an incompetent attacker it is already 
> > enough to just remove a partition from the partition table 
> > and re-create it at need in the same place. For a competent
> > attacker, the things that exist today just provide probable
> > cause that you are trying to hide something and hence make
> > things worse.
> > 
> > As it is, these tools are of negative worth, as they give 
> > users a false sense of security.
> > 
> > Also refer to FAQ 5.18 for my analysis of the status-quo.
> > The paper by Schneier et. al. I reference provides an 
> > excellent in-depth analysis of the problems with the idea 
> > of plausible deniability in a real OS environment.
> > 
> > Regards,
> > Arno
> > 
> > On Fri, Jun 24, 2016 at 14:16:05 CEST, Police Terror wrote:
> >> Here's the tool:
> >>
> >> https://github.com/RojavaCrypto/hiddencrypt
> >>
> >> Mostly proof of concept for now.
> >>
> >> Would be cool in the future to work something better out by hacking
> >> cryptsetup itself. Maybe if there's headerless volumes (that just look
> >> like random data).
> >>
> >> Multiple deniable Linux installs would be a killer feature.
> >>
> >> Milan Broz:
> >>> On 06/24/2016 11:56 AM, Police Terror wrote:
> >>>> Ahhh yes! Thank you Diagon and Milan.
> >>>> I've added now the -q switch.
> >>>>
> >>>> I looked at the pycryptsetup but 2 things:
> >>>>
> >>>> 1. It's not Python 3
> >>>> 2. It's an extra dependency and not in the repos.
> >>>
> >>> Fedora has both Python3 and 2 builds but other
> >>> distros do not compile it probably.
> >>>
> >>> (It was designed for Anaconda installer mainly.)
> >>>
> >>> Milan
> >>> _______________________________________________
> >>> dm-crypt mailing list
> >>> dm-crypt@saout.de
> >>> http://www.saout.de/mailman/listinfo/dm-crypt
> >>>
> >> _______________________________________________
> >> dm-crypt mailing list
> >> dm-crypt@saout.de
> >> http://www.saout.de/mailman/listinfo/dm-crypt
> > 
> _______________________________________________
> dm-crypt mailing list
> dm-crypt@saout.de
> http://www.saout.de/mailman/listinfo/dm-crypt

-- 
Arno Wagner,     Dr. sc. techn., Dipl. Inform.,    Email: arno@wagner.name
GnuPG: ID: CB5D9718  FP: 12D6 C03B 1B30 33BB 13CF  B774 E35C 5FA1 CB5D 9718
----
A good decision is based on knowledge and not on numbers. -- Plato

If it's in the news, don't worry about it.  The very definition of 
"news" is "something that hardly ever happens." -- Bruce Schneier

Re: [dm-crypt] cryptsetup with Python subprocess + pipes

[Arno Wagner]

I think I may have found what confuses all these people. They
may actually be thinking about simple deniability (just
hiding data) instead of plausible deniability (where the
attacker knows something may be in those "random" bytes
but cannot prove it and in particular it is "plausible" 
that no data is in there). 

I have updated FAQ Item 5.18 to hopefully make that clearer.

Regards,
Arno


On Fri, Jun 24, 2016 at 18:58:16 CEST, Arno Wagner wrote:
> On Fri, Jun 24, 2016 at 18:33:37 CEST, Police Terror wrote:
> > You obviously did not look at the example because the data is not hidden
> > steganographically.
> 
> You obviously did not understand what I wrote, because
> I never claimed that in this case it was. I only claimed that
> at this time this is the only valid known way to do plausible 
> deniablility.
> 
> [...] 
> 
> > About a well engineered solution: today I just found VeraCrypt which
> > actually works well. I encourage people to try it. It can create hidden
> > volumes.
> 
> ... and that have all the problems hidden volumes come with. 
> They also managed to create additional problems TrueCrypt does
> not have, for example a broken password "quality" assessment
> that cannot be bypassed (alternatively you get a broken 
> password iteration, that can lead to minutes of unlock time).
> My trust in the VeraCrypt developers is much, much lower than
> in the original TrueCrypt developers.
> 
> Seriously. Bright-eyed "can do" attitudes have no place in 
> IT security. They do much more harm than good and they endanger
> users.
>  
> Regards,
> Arno
> 
> > Arno Wagner:
> > > What I would like to see is a plausible deniability technique
> > > that is not just a worthless tech-demo, but where the 
> > > "plausible" part was actually well engineered with regards
> > > to how things work in the real world and that is not limited
> > > to a very small amount of steganographically hidden data.
> > > So far, none exists.
> > > 
> > > The thing is, for an incompetent attacker it is already 
> > > enough to just remove a partition from the partition table 
> > > and re-create it at need in the same place. For a competent
> > > attacker, the things that exist today just provide probable
> > > cause that you are trying to hide something and hence make
> > > things worse.
> > > 
> > > As it is, these tools are of negative worth, as they give 
> > > users a false sense of security.
> > > 
> > > Also refer to FAQ 5.18 for my analysis of the status-quo.
> > > The paper by Schneier et. al. I reference provides an 
> > > excellent in-depth analysis of the problems with the idea 
> > > of plausible deniability in a real OS environment.
> > > 
> > > Regards,
> > > Arno
> > > 
> > > On Fri, Jun 24, 2016 at 14:16:05 CEST, Police Terror wrote:
> > >> Here's the tool:
> > >>
> > >> https://github.com/RojavaCrypto/hiddencrypt
> > >>
> > >> Mostly proof of concept for now.
> > >>
> > >> Would be cool in the future to work something better out by hacking
> > >> cryptsetup itself. Maybe if there's headerless volumes (that just look
> > >> like random data).
> > >>
> > >> Multiple deniable Linux installs would be a killer feature.
> > >>
> > >> Milan Broz:
> > >>> On 06/24/2016 11:56 AM, Police Terror wrote:
> > >>>> Ahhh yes! Thank you Diagon and Milan.
> > >>>> I've added now the -q switch.
> > >>>>
> > >>>> I looked at the pycryptsetup but 2 things:
> > >>>>
> > >>>> 1. It's not Python 3
> > >>>> 2. It's an extra dependency and not in the repos.
> > >>>
> > >>> Fedora has both Python3 and 2 builds but other
> > >>> distros do not compile it probably.
> > >>>
> > >>> (It was designed for Anaconda installer mainly.)
> > >>>
> > >>> Milan
> > >>> _______________________________________________
> > >>> dm-crypt mailing list
> > >>> dm-crypt@saout.de
> > >>> http://www.saout.de/mailman/listinfo/dm-crypt
> > >>>
> > >> _______________________________________________
> > >> dm-crypt mailing list
> > >> dm-crypt@saout.de
> > >> http://www.saout.de/mailman/listinfo/dm-crypt
> > > 
> > _______________________________________________
> > dm-crypt mailing list
> > dm-crypt@saout.de
> > http://www.saout.de/mailman/listinfo/dm-crypt
> 
> -- 
> Arno Wagner,     Dr. sc. techn., Dipl. Inform.,    Email: arno@wagner.name
> GnuPG: ID: CB5D9718  FP: 12D6 C03B 1B30 33BB 13CF  B774 E35C 5FA1 CB5D 9718
> ----
> A good decision is based on knowledge and not on numbers. -- Plato
> 
> If it's in the news, don't worry about it.  The very definition of 
> "news" is "something that hardly ever happens." -- Bruce Schneier
> _______________________________________________
> dm-crypt mailing list
> dm-crypt@saout.de
> http://www.saout.de/mailman/listinfo/dm-crypt

-- 
Arno Wagner,     Dr. sc. techn., Dipl. Inform.,    Email: arno@wagner.name
GnuPG: ID: CB5D9718  FP: 12D6 C03B 1B30 33BB 13CF  B774 E35C 5FA1 CB5D 9718
----
A good decision is based on knowledge and not on numbers. -- Plato

If it's in the news, don't worry about it.  The very definition of 
"news" is "something that hardly ever happens." -- Bruce Schneier

Re: [dm-crypt] cryptsetup with Python subprocess + pipes

[Police Terror]

In this case we have 10 volumes which are created upon initialization,
and the key is discarded.

The attacker does not know if anything exists in any of those 10
volumes, and he cannot prove it either.

Your password is hashed and indexed to look up a row in a hashmap array,
and then that row is decrypted to get the offset for the volume to
decrypt. Then using your password, you can decrypt that volume.

Otherwise there's no other data. If LUKS didn't have headers, it would
be even more deniable because the crypto would just look like random data.

Arno Wagner:
> I think I may have found what confuses all these people. They
> may actually be thinking about simple deniability (just
> hiding data) instead of plausible deniability (where the
> attacker knows something may be in those "random" bytes
> but cannot prove it and in particular it is "plausible" 
> that no data is in there). 
> 
> I have updated FAQ Item 5.18 to hopefully make that clearer.
> 
> Regards,
> Arno
> 
> 
> On Fri, Jun 24, 2016 at 18:58:16 CEST, Arno Wagner wrote:
>> On Fri, Jun 24, 2016 at 18:33:37 CEST, Police Terror wrote:
>>> You obviously did not look at the example because the data is not hidden
>>> steganographically.
>>
>> You obviously did not understand what I wrote, because
>> I never claimed that in this case it was. I only claimed that
>> at this time this is the only valid known way to do plausible 
>> deniablility.
>>
>> [...] 
>>
>>> About a well engineered solution: today I just found VeraCrypt which
>>> actually works well. I encourage people to try it. It can create hidden
>>> volumes.
>>
>> ... and that have all the problems hidden volumes come with. 
>> They also managed to create additional problems TrueCrypt does
>> not have, for example a broken password "quality" assessment
>> that cannot be bypassed (alternatively you get a broken 
>> password iteration, that can lead to minutes of unlock time).
>> My trust in the VeraCrypt developers is much, much lower than
>> in the original TrueCrypt developers.
>>
>> Seriously. Bright-eyed "can do" attitudes have no place in 
>> IT security. They do much more harm than good and they endanger
>> users.
>>  
>> Regards,
>> Arno
>>
>>> Arno Wagner:
>>>> What I would like to see is a plausible deniability technique
>>>> that is not just a worthless tech-demo, but where the 
>>>> "plausible" part was actually well engineered with regards
>>>> to how things work in the real world and that is not limited
>>>> to a very small amount of steganographically hidden data.
>>>> So far, none exists.
>>>>
>>>> The thing is, for an incompetent attacker it is already 
>>>> enough to just remove a partition from the partition table 
>>>> and re-create it at need in the same place. For a competent
>>>> attacker, the things that exist today just provide probable
>>>> cause that you are trying to hide something and hence make
>>>> things worse.
>>>>
>>>> As it is, these tools are of negative worth, as they give 
>>>> users a false sense of security.
>>>>
>>>> Also refer to FAQ 5.18 for my analysis of the status-quo.
>>>> The paper by Schneier et. al. I reference provides an 
>>>> excellent in-depth analysis of the problems with the idea 
>>>> of plausible deniability in a real OS environment.
>>>>
>>>> Regards,
>>>> Arno
>>>>
>>>> On Fri, Jun 24, 2016 at 14:16:05 CEST, Police Terror wrote:
>>>>> Here's the tool:
>>>>>
>>>>> https://github.com/RojavaCrypto/hiddencrypt
>>>>>
>>>>> Mostly proof of concept for now.
>>>>>
>>>>> Would be cool in the future to work something better out by hacking
>>>>> cryptsetup itself. Maybe if there's headerless volumes (that just look
>>>>> like random data).
>>>>>
>>>>> Multiple deniable Linux installs would be a killer feature.
>>>>>
>>>>> Milan Broz:
>>>>>> On 06/24/2016 11:56 AM, Police Terror wrote:
>>>>>>> Ahhh yes! Thank you Diagon and Milan.
>>>>>>> I've added now the -q switch.
>>>>>>>
>>>>>>> I looked at the pycryptsetup but 2 things:
>>>>>>>
>>>>>>> 1. It's not Python 3
>>>>>>> 2. It's an extra dependency and not in the repos.
>>>>>>
>>>>>> Fedora has both Python3 and 2 builds but other
>>>>>> distros do not compile it probably.
>>>>>>
>>>>>> (It was designed for Anaconda installer mainly.)
>>>>>>
>>>>>> Milan
>>>>>> _______________________________________________
>>>>>> dm-crypt mailing list
>>>>>> dm-crypt@saout.de
>>>>>> http://www.saout.de/mailman/listinfo/dm-crypt
>>>>>>
>>>>> _______________________________________________
>>>>> dm-crypt mailing list
>>>>> dm-crypt@saout.de
>>>>> http://www.saout.de/mailman/listinfo/dm-crypt
>>>>
>>> _______________________________________________
>>> dm-crypt mailing list
>>> dm-crypt@saout.de
>>> http://www.saout.de/mailman/listinfo/dm-crypt
>>
>> -- 
>> Arno Wagner,     Dr. sc. techn., Dipl. Inform.,    Email: arno@wagner.name
>> GnuPG: ID: CB5D9718  FP: 12D6 C03B 1B30 33BB 13CF  B774 E35C 5FA1 CB5D 9718
>> ----
>> A good decision is based on knowledge and not on numbers. -- Plato
>>
>> If it's in the news, don't worry about it.  The very definition of 
>> "news" is "something that hardly ever happens." -- Bruce Schneier
>> _______________________________________________
>> dm-crypt mailing list
>> dm-crypt@saout.de
>> http://www.saout.de/mailman/listinfo/dm-crypt
> 

Re: [dm-crypt] cryptsetup with Python subprocess + pipes

[Arno Wagner]

If you want that, just use plain dm-crypt. It does not have 
a header. Just remember that you have no plausibility for
the denial that they have data (because the assumption that 
volumes contain data is entirely plausible), hence you need to 
hide the volumes effectively. If the attacker finds these, 
you are screwed. (As explained in FAQ 5.18.)

Also remember that the key point in "plausible deniability"
is "plausible" and not "deniability". Deniability is easy.
Plausible deniability is not.

Regards,
Arno

On Wed, Jun 29, 2016 at 10:47:15 CEST, Police Terror wrote:
> In this case we have 10 volumes which are created upon initialization,
> and the key is discarded.
> 
> The attacker does not know if anything exists in any of those 10
> volumes, and he cannot prove it either.
> 
> Your password is hashed and indexed to look up a row in a hashmap array,
> and then that row is decrypted to get the offset for the volume to
> decrypt. Then using your password, you can decrypt that volume.
> 
> Otherwise there's no other data. If LUKS didn't have headers, it would
> be even more deniable because the crypto would just look like random data.
> 
> Arno Wagner:
> > I think I may have found what confuses all these people. They
> > may actually be thinking about simple deniability (just
> > hiding data) instead of plausible deniability (where the
> > attacker knows something may be in those "random" bytes
> > but cannot prove it and in particular it is "plausible" 
> > that no data is in there). 
> > 
> > I have updated FAQ Item 5.18 to hopefully make that clearer.
> > 
> > Regards,
> > Arno
> > 
> > 
> > On Fri, Jun 24, 2016 at 18:58:16 CEST, Arno Wagner wrote:
> >> On Fri, Jun 24, 2016 at 18:33:37 CEST, Police Terror wrote:
> >>> You obviously did not look at the example because the data is not hidden
> >>> steganographically.
> >>
> >> You obviously did not understand what I wrote, because
> >> I never claimed that in this case it was. I only claimed that
> >> at this time this is the only valid known way to do plausible 
> >> deniablility.
> >>
> >> [...] 
> >>
> >>> About a well engineered solution: today I just found VeraCrypt which
> >>> actually works well. I encourage people to try it. It can create hidden
> >>> volumes.
> >>
> >> ... and that have all the problems hidden volumes come with. 
> >> They also managed to create additional problems TrueCrypt does
> >> not have, for example a broken password "quality" assessment
> >> that cannot be bypassed (alternatively you get a broken 
> >> password iteration, that can lead to minutes of unlock time).
> >> My trust in the VeraCrypt developers is much, much lower than
> >> in the original TrueCrypt developers.
> >>
> >> Seriously. Bright-eyed "can do" attitudes have no place in 
> >> IT security. They do much more harm than good and they endanger
> >> users.
> >>  
> >> Regards,
> >> Arno
> >>
> >>> Arno Wagner:
> >>>> What I would like to see is a plausible deniability technique
> >>>> that is not just a worthless tech-demo, but where the 
> >>>> "plausible" part was actually well engineered with regards
> >>>> to how things work in the real world and that is not limited
> >>>> to a very small amount of steganographically hidden data.
> >>>> So far, none exists.
> >>>>
> >>>> The thing is, for an incompetent attacker it is already 
> >>>> enough to just remove a partition from the partition table 
> >>>> and re-create it at need in the same place. For a competent
> >>>> attacker, the things that exist today just provide probable
> >>>> cause that you are trying to hide something and hence make
> >>>> things worse.
> >>>>
> >>>> As it is, these tools are of negative worth, as they give 
> >>>> users a false sense of security.
> >>>>
> >>>> Also refer to FAQ 5.18 for my analysis of the status-quo.
> >>>> The paper by Schneier et. al. I reference provides an 
> >>>> excellent in-depth analysis of the problems with the idea 
> >>>> of plausible deniability in a real OS environment.
> >>>>
> >>>> Regards,
> >>>> Arno
> >>>>
> >>>> On Fri, Jun 24, 2016 at 14:16:05 CEST, Police Terror wrote:
> >>>>> Here's the tool:
> >>>>>
> >>>>> https://github.com/RojavaCrypto/hiddencrypt
> >>>>>
> >>>>> Mostly proof of concept for now.
> >>>>>
> >>>>> Would be cool in the future to work something better out by hacking
> >>>>> cryptsetup itself. Maybe if there's headerless volumes (that just look
> >>>>> like random data).
> >>>>>
> >>>>> Multiple deniable Linux installs would be a killer feature.
> >>>>>
> >>>>> Milan Broz:
> >>>>>> On 06/24/2016 11:56 AM, Police Terror wrote:
> >>>>>>> Ahhh yes! Thank you Diagon and Milan.
> >>>>>>> I've added now the -q switch.
> >>>>>>>
> >>>>>>> I looked at the pycryptsetup but 2 things:
> >>>>>>>
> >>>>>>> 1. It's not Python 3
> >>>>>>> 2. It's an extra dependency and not in the repos.
> >>>>>>
> >>>>>> Fedora has both Python3 and 2 builds but other
> >>>>>> distros do not compile it probably.
> >>>>>>
> >>>>>> (It was designed for Anaconda installer mainly.)
> >>>>>>
> >>>>>> Milan
> >>>>>> _______________________________________________
> >>>>>> dm-crypt mailing list
> >>>>>> dm-crypt@saout.de
> >>>>>> http://www.saout.de/mailman/listinfo/dm-crypt
> >>>>>>
> >>>>> _______________________________________________
> >>>>> dm-crypt mailing list
> >>>>> dm-crypt@saout.de
> >>>>> http://www.saout.de/mailman/listinfo/dm-crypt
> >>>>
> >>> _______________________________________________
> >>> dm-crypt mailing list
> >>> dm-crypt@saout.de
> >>> http://www.saout.de/mailman/listinfo/dm-crypt
> >>
> >> -- 
> >> Arno Wagner,     Dr. sc. techn., Dipl. Inform.,    Email: arno@wagner.name
> >> GnuPG: ID: CB5D9718  FP: 12D6 C03B 1B30 33BB 13CF  B774 E35C 5FA1 CB5D 9718
> >> ----
> >> A good decision is based on knowledge and not on numbers. -- Plato
> >>
> >> If it's in the news, don't worry about it.  The very definition of 
> >> "news" is "something that hardly ever happens." -- Bruce Schneier
> >> _______________________________________________
> >> dm-crypt mailing list
> >> dm-crypt@saout.de
> >> http://www.saout.de/mailman/listinfo/dm-crypt
> > 
> _______________________________________________
> dm-crypt mailing list
> dm-crypt@saout.de
> http://www.saout.de/mailman/listinfo/dm-crypt

-- 
Arno Wagner,     Dr. sc. techn., Dipl. Inform.,    Email: arno@wagner.name
GnuPG: ID: CB5D9718  FP: 12D6 C03B 1B30 33BB 13CF  B774 E35C 5FA1 CB5D 9718
----
A good decision is based on knowledge and not on numbers. -- Plato

If it's in the news, don't worry about it.  The very definition of 
"news" is "something that hardly ever happens." -- Bruce Schneier

Re: [dm-crypt] cryptsetup with Python subprocess + pipes

[Police Terror]

Under UK law there is no difference.

The police need reasonable suspicion to be able to compel you to give up
a crypto key. If you have several volumes that are randomly used
depending on the passphrase you give, then there is nothing to give them
reasonable doubt you are using one over the other. This is covered by
Regulation of Investigatory Powers Act 2000, section 49. 1. Whereas with
VeraCrypt style volumes (which can contain 1 hidden volume), the scheme
I presented is better because under UK law, a police officer could
suspect another hidden volume based on circumstantial evidence. But the
scheme with 10 volumes, leaves no link or indication that they are used
as storage. For a UK officer to compel you to decrypt something, they
must be able to say which volume they suspect you have access to.

Also because the volumes are looked up based on passphrases (to index
the hash map array), then it makes rainbow attacks more difficult. This
is a common case in UK law where they compel a person who previously
knew the password but cannot remember it in full. The suspect gives the
police instructions on how they can regenerate the password. With this
scheme it will be expensive to run these kinds of attacks unless it was
a pure brute force.

Arno Wagner:
> If you want that, just use plain dm-crypt. It does not have 
> a header. Just remember that you have no plausibility for
> the denial that they have data (because the assumption that 
> volumes contain data is entirely plausible), hence you need to 
> hide the volumes effectively. If the attacker finds these, 
> you are screwed. (As explained in FAQ 5.18.)
> 
> Also remember that the key point in "plausible deniability"
> is "plausible" and not "deniability". Deniability is easy.
> Plausible deniability is not.
> 
> Regards,
> Arno
> 
> On Wed, Jun 29, 2016 at 10:47:15 CEST, Police Terror wrote:
>> In this case we have 10 volumes which are created upon initialization,
>> and the key is discarded.
>>
>> The attacker does not know if anything exists in any of those 10
>> volumes, and he cannot prove it either.
>>
>> Your password is hashed and indexed to look up a row in a hashmap array,
>> and then that row is decrypted to get the offset for the volume to
>> decrypt. Then using your password, you can decrypt that volume.
>>
>> Otherwise there's no other data. If LUKS didn't have headers, it would
>> be even more deniable because the crypto would just look like random data.
>>
>> Arno Wagner:
>>> I think I may have found what confuses all these people. They
>>> may actually be thinking about simple deniability (just
>>> hiding data) instead of plausible deniability (where the
>>> attacker knows something may be in those "random" bytes
>>> but cannot prove it and in particular it is "plausible" 
>>> that no data is in there). 
>>>
>>> I have updated FAQ Item 5.18 to hopefully make that clearer.
>>>
>>> Regards,
>>> Arno
>>>
>>>
>>> On Fri, Jun 24, 2016 at 18:58:16 CEST, Arno Wagner wrote:
>>>> On Fri, Jun 24, 2016 at 18:33:37 CEST, Police Terror wrote:
>>>>> You obviously did not look at the example because the data is not hidden
>>>>> steganographically.
>>>>
>>>> You obviously did not understand what I wrote, because
>>>> I never claimed that in this case it was. I only claimed that
>>>> at this time this is the only valid known way to do plausible 
>>>> deniablility.
>>>>
>>>> [...] 
>>>>
>>>>> About a well engineered solution: today I just found VeraCrypt which
>>>>> actually works well. I encourage people to try it. It can create hidden
>>>>> volumes.
>>>>
>>>> ... and that have all the problems hidden volumes come with. 
>>>> They also managed to create additional problems TrueCrypt does
>>>> not have, for example a broken password "quality" assessment
>>>> that cannot be bypassed (alternatively you get a broken 
>>>> password iteration, that can lead to minutes of unlock time).
>>>> My trust in the VeraCrypt developers is much, much lower than
>>>> in the original TrueCrypt developers.
>>>>
>>>> Seriously. Bright-eyed "can do" attitudes have no place in 
>>>> IT security. They do much more harm than good and they endanger
>>>> users.
>>>>  
>>>> Regards,
>>>> Arno
>>>>
>>>>> Arno Wagner:
>>>>>> What I would like to see is a plausible deniability technique
>>>>>> that is not just a worthless tech-demo, but where the 
>>>>>> "plausible" part was actually well engineered with regards
>>>>>> to how things work in the real world and that is not limited
>>>>>> to a very small amount of steganographically hidden data.
>>>>>> So far, none exists.
>>>>>>
>>>>>> The thing is, for an incompetent attacker it is already 
>>>>>> enough to just remove a partition from the partition table 
>>>>>> and re-create it at need in the same place. For a competent
>>>>>> attacker, the things that exist today just provide probable
>>>>>> cause that you are trying to hide something and hence make
>>>>>> things worse.
>>>>>>
>>>>>> As it is, these tools are of negative worth, as they give 
>>>>>> users a false sense of security.
>>>>>>
>>>>>> Also refer to FAQ 5.18 for my analysis of the status-quo.
>>>>>> The paper by Schneier et. al. I reference provides an 
>>>>>> excellent in-depth analysis of the problems with the idea 
>>>>>> of plausible deniability in a real OS environment.
>>>>>>
>>>>>> Regards,
>>>>>> Arno
>>>>>>
>>>>>> On Fri, Jun 24, 2016 at 14:16:05 CEST, Police Terror wrote:
>>>>>>> Here's the tool:
>>>>>>>
>>>>>>> https://github.com/RojavaCrypto/hiddencrypt
>>>>>>>
>>>>>>> Mostly proof of concept for now.
>>>>>>>
>>>>>>> Would be cool in the future to work something better out by hacking
>>>>>>> cryptsetup itself. Maybe if there's headerless volumes (that just look
>>>>>>> like random data).
>>>>>>>
>>>>>>> Multiple deniable Linux installs would be a killer feature.
>>>>>>>
>>>>>>> Milan Broz:
>>>>>>>> On 06/24/2016 11:56 AM, Police Terror wrote:
>>>>>>>>> Ahhh yes! Thank you Diagon and Milan.
>>>>>>>>> I've added now the -q switch.
>>>>>>>>>
>>>>>>>>> I looked at the pycryptsetup but 2 things:
>>>>>>>>>
>>>>>>>>> 1. It's not Python 3
>>>>>>>>> 2. It's an extra dependency and not in the repos.
>>>>>>>>
>>>>>>>> Fedora has both Python3 and 2 builds but other
>>>>>>>> distros do not compile it probably.
>>>>>>>>
>>>>>>>> (It was designed for Anaconda installer mainly.)
>>>>>>>>
>>>>>>>> Milan
>>>>>>>> _______________________________________________
>>>>>>>> dm-crypt mailing list
>>>>>>>> dm-crypt@saout.de
>>>>>>>> http://www.saout.de/mailman/listinfo/dm-crypt
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> dm-crypt mailing list
>>>>>>> dm-crypt@saout.de
>>>>>>> http://www.saout.de/mailman/listinfo/dm-crypt
>>>>>>
>>>>> _______________________________________________
>>>>> dm-crypt mailing list
>>>>> dm-crypt@saout.de
>>>>> http://www.saout.de/mailman/listinfo/dm-crypt
>>>>
>>>> -- 
>>>> Arno Wagner,     Dr. sc. techn., Dipl. Inform.,    Email: arno@wagner.name
>>>> GnuPG: ID: CB5D9718  FP: 12D6 C03B 1B30 33BB 13CF  B774 E35C 5FA1 CB5D 9718
>>>> ----
>>>> A good decision is based on knowledge and not on numbers. -- Plato
>>>>
>>>> If it's in the news, don't worry about it.  The very definition of 
>>>> "news" is "something that hardly ever happens." -- Bruce Schneier
>>>> _______________________________________________
>>>> dm-crypt mailing list
>>>> dm-crypt@saout.de
>>>> http://www.saout.de/mailman/listinfo/dm-crypt
>>>
>> _______________________________________________
>> dm-crypt mailing list
>> dm-crypt@saout.de
>> http://www.saout.de/mailman/listinfo/dm-crypt
> 

Re: [dm-crypt] cryptsetup with Python subprocess + pipes

[Arno Wagner]

Well, if you read that right, then you have found a big fat 
loophole in the UK legislation. It will be no doubt be closed 
if anybody ever uses it successfully.

However, I see it only talking about "protected information",
not about how and where it is stored. So my reading would
be that they can demand the passphrase for "that storage 
system" (or the like), and all you can claim is that your 
"storage system" (which comprises all parts including decoys) 
does not contain data. Then you need to hope a judge believes 
you, because rather obviously nobody would normally go to 
that effort and then store nothing in it.

You could of course still put several containers in there
and only give them one and claim the others are decoys.
Again, you need a judge to believe you or you are screwed.

Here is an even simpler system that makes the problem 
blatantly obvious: Put a large file with random data on 
disk. Claim it is random input used as driver of a 
simulation and put in a file to be able to repeat the 
simulation. (In reality, it is a loop-mounted dm-crypt 
device.) If I were to do that, I could even point to academic 
papers of which I an the author that deal with simulations.

Yet if "they" suspect something, do you really think this
scheme would work? They would just say that obviously this 
is a file holding "protected information" and obviously
I am lying to them. If there already is some suspicion,
they have a good chance to convince a judge, and even
if that is only "he acted funny". People have been shot
by the police even in the UK on grounds not any more solid.

Regards,
Arno

On Wed, Jun 29, 2016 at 13:47:00 CEST, Police Terror wrote:
> Under UK law there is no difference.
> 
> The police need reasonable suspicion to be able to compel you to give up
> a crypto key. If you have several volumes that are randomly used
> depending on the passphrase you give, then there is nothing to give them
> reasonable doubt you are using one over the other. This is covered by
> Regulation of Investigatory Powers Act 2000, section 49. 1. Whereas with
> VeraCrypt style volumes (which can contain 1 hidden volume), the scheme
> I presented is better because under UK law, a police officer could
> suspect another hidden volume based on circumstantial evidence. But the
> scheme with 10 volumes, leaves no link or indication that they are used
> as storage. For a UK officer to compel you to decrypt something, they
> must be able to say which volume they suspect you have access to.
> 
> Also because the volumes are looked up based on passphrases (to index
> the hash map array), then it makes rainbow attacks more difficult. This
> is a common case in UK law where they compel a person who previously
> knew the password but cannot remember it in full. The suspect gives the
> police instructions on how they can regenerate the password. With this
> scheme it will be expensive to run these kinds of attacks unless it was
> a pure brute force.
> 
> Arno Wagner:
> > If you want that, just use plain dm-crypt. It does not have 
> > a header. Just remember that you have no plausibility for
> > the denial that they have data (because the assumption that 
> > volumes contain data is entirely plausible), hence you need to 
> > hide the volumes effectively. If the attacker finds these, 
> > you are screwed. (As explained in FAQ 5.18.)
> > 
> > Also remember that the key point in "plausible deniability"
> > is "plausible" and not "deniability". Deniability is easy.
> > Plausible deniability is not.
> > 
> > Regards,
> > Arno
> > 
> > On Wed, Jun 29, 2016 at 10:47:15 CEST, Police Terror wrote:
> >> In this case we have 10 volumes which are created upon initialization,
> >> and the key is discarded.
> >>
> >> The attacker does not know if anything exists in any of those 10
> >> volumes, and he cannot prove it either.
> >>
> >> Your password is hashed and indexed to look up a row in a hashmap array,
> >> and then that row is decrypted to get the offset for the volume to
> >> decrypt. Then using your password, you can decrypt that volume.
> >>
> >> Otherwise there's no other data. If LUKS didn't have headers, it would
> >> be even more deniable because the crypto would just look like random data.
> >>
> >> Arno Wagner:
> >>> I think I may have found what confuses all these people. They
> >>> may actually be thinking about simple deniability (just
> >>> hiding data) instead of plausible deniability (where the
> >>> attacker knows something may be in those "random" bytes
> >>> but cannot prove it and in particular it is "plausible" 
> >>> that no data is in there). 
> >>>
> >>> I have updated FAQ Item 5.18 to hopefully make that clearer.
> >>>
> >>> Regards,
> >>> Arno
> >>>
> >>>
> >>> On Fri, Jun 24, 2016 at 18:58:16 CEST, Arno Wagner wrote:
> >>>> On Fri, Jun 24, 2016 at 18:33:37 CEST, Police Terror wrote:
> >>>>> You obviously did not look at the example because the data is not hidden
> >>>>> steganographically.
> >>>>
> >>>> You obviously did not understand what I wrote, because
> >>>> I never claimed that in this case it was. I only claimed that
> >>>> at this time this is the only valid known way to do plausible 
> >>>> deniablility.
> >>>>
> >>>> [...] 
> >>>>
> >>>>> About a well engineered solution: today I just found VeraCrypt which
> >>>>> actually works well. I encourage people to try it. It can create hidden
> >>>>> volumes.
> >>>>
> >>>> ... and that have all the problems hidden volumes come with. 
> >>>> They also managed to create additional problems TrueCrypt does
> >>>> not have, for example a broken password "quality" assessment
> >>>> that cannot be bypassed (alternatively you get a broken 
> >>>> password iteration, that can lead to minutes of unlock time).
> >>>> My trust in the VeraCrypt developers is much, much lower than
> >>>> in the original TrueCrypt developers.
> >>>>
> >>>> Seriously. Bright-eyed "can do" attitudes have no place in 
> >>>> IT security. They do much more harm than good and they endanger
> >>>> users.
> >>>>  
> >>>> Regards,
> >>>> Arno
> >>>>
> >>>>> Arno Wagner:
> >>>>>> What I would like to see is a plausible deniability technique
> >>>>>> that is not just a worthless tech-demo, but where the 
> >>>>>> "plausible" part was actually well engineered with regards
> >>>>>> to how things work in the real world and that is not limited
> >>>>>> to a very small amount of steganographically hidden data.
> >>>>>> So far, none exists.
> >>>>>>
> >>>>>> The thing is, for an incompetent attacker it is already 
> >>>>>> enough to just remove a partition from the partition table 
> >>>>>> and re-create it at need in the same place. For a competent
> >>>>>> attacker, the things that exist today just provide probable
> >>>>>> cause that you are trying to hide something and hence make
> >>>>>> things worse.
> >>>>>>
> >>>>>> As it is, these tools are of negative worth, as they give 
> >>>>>> users a false sense of security.
> >>>>>>
> >>>>>> Also refer to FAQ 5.18 for my analysis of the status-quo.
> >>>>>> The paper by Schneier et. al. I reference provides an 
> >>>>>> excellent in-depth analysis of the problems with the idea 
> >>>>>> of plausible deniability in a real OS environment.
> >>>>>>
> >>>>>> Regards,
> >>>>>> Arno
> >>>>>>
> >>>>>> On Fri, Jun 24, 2016 at 14:16:05 CEST, Police Terror wrote:
> >>>>>>> Here's the tool:
> >>>>>>>
> >>>>>>> https://github.com/RojavaCrypto/hiddencrypt
> >>>>>>>
> >>>>>>> Mostly proof of concept for now.
> >>>>>>>
> >>>>>>> Would be cool in the future to work something better out by hacking
> >>>>>>> cryptsetup itself. Maybe if there's headerless volumes (that just look
> >>>>>>> like random data).
> >>>>>>>
> >>>>>>> Multiple deniable Linux installs would be a killer feature.
> >>>>>>>
> >>>>>>> Milan Broz:
> >>>>>>>> On 06/24/2016 11:56 AM, Police Terror wrote:
> >>>>>>>>> Ahhh yes! Thank you Diagon and Milan.
> >>>>>>>>> I've added now the -q switch.
> >>>>>>>>>
> >>>>>>>>> I looked at the pycryptsetup but 2 things:
> >>>>>>>>>
> >>>>>>>>> 1. It's not Python 3
> >>>>>>>>> 2. It's an extra dependency and not in the repos.
> >>>>>>>>
> >>>>>>>> Fedora has both Python3 and 2 builds but other
> >>>>>>>> distros do not compile it probably.
> >>>>>>>>
> >>>>>>>> (It was designed for Anaconda installer mainly.)
> >>>>>>>>
> >>>>>>>> Milan
> >>>>>>>> _______________________________________________
> >>>>>>>> dm-crypt mailing list
> >>>>>>>> dm-crypt@saout.de
> >>>>>>>> http://www.saout.de/mailman/listinfo/dm-crypt
> >>>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> dm-crypt mailing list
> >>>>>>> dm-crypt@saout.de
> >>>>>>> http://www.saout.de/mailman/listinfo/dm-crypt
> >>>>>>
> >>>>> _______________________________________________
> >>>>> dm-crypt mailing list
> >>>>> dm-crypt@saout.de
> >>>>> http://www.saout.de/mailman/listinfo/dm-crypt
> >>>>
> >>>> -- 
> >>>> Arno Wagner,     Dr. sc. techn., Dipl. Inform.,    Email: arno@wagner.name
> >>>> GnuPG: ID: CB5D9718  FP: 12D6 C03B 1B30 33BB 13CF  B774 E35C 5FA1 CB5D 9718
> >>>> ----
> >>>> A good decision is based on knowledge and not on numbers. -- Plato
> >>>>
> >>>> If it's in the news, don't worry about it.  The very definition of 
> >>>> "news" is "something that hardly ever happens." -- Bruce Schneier
> >>>> _______________________________________________
> >>>> dm-crypt mailing list
> >>>> dm-crypt@saout.de
> >>>> http://www.saout.de/mailman/listinfo/dm-crypt
> >>>
> >> _______________________________________________
> >> dm-crypt mailing list
> >> dm-crypt@saout.de
> >> http://www.saout.de/mailman/listinfo/dm-crypt
> > 
> _______________________________________________
> dm-crypt mailing list
> dm-crypt@saout.de
> http://www.saout.de/mailman/listinfo/dm-crypt

-- 
Arno Wagner,     Dr. sc. techn., Dipl. Inform.,    Email: arno@wagner.name
GnuPG: ID: CB5D9718  FP: 12D6 C03B 1B30 33BB 13CF  B774 E35C 5FA1 CB5D 9718
----
A good decision is based on knowledge and not on numbers. -- Plato

If it's in the news, don't worry about it.  The very definition of 
"news" is "something that hardly ever happens." -- Bruce Schneier