[PATCH 2/7] dma: fsl-edma: Add FSL_EDMA_DRV_MCF flag for ColdFire eDMA

[Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>]

Add FSL_EDMA_DRV_MCF driver flag to identify MCF ColdFire eDMA
controllers which have a native M68K register layout.

The edma_writeb() function applies an XOR ^ 0x3 byte-lane adjustment for
big-endian eDMA controllers where byte registers within a 32-bit word
need address correction.

However, the MCF54418 eDMA 8-bit registers (SERQ, CERQ, SEEI, CEEI,
CINT, CERR, SSRT, CDNE) are located at sequential byte addresses
(0x4018-0x401F) as documented in the MCF54418 Reference Manual Table
19-2. No byte-lane adjustment is needed, as applying the XOR causes
writes to target incorrect registers (writing to CERR at 0x401D would
actually access SSRT at 0x401E).

Set this flag in the MCF eDMA driver to bypass the XOR adjustment and
access registers at their documented addresses.

Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
---
 drivers/dma/fsl-edma-common.h | 5 ++++-
 drivers/dma/mcf-edma-main.c   | 2 +-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
index 205a96489094805aa728b72a51ae101cd88fa003..4c86f2f39c1db9a812245fe85755ec8d1169c44c 100644
--- a/drivers/dma/fsl-edma-common.h
+++ b/drivers/dma/fsl-edma-common.h
@@ -225,6 +225,8 @@ struct fsl_edma_desc {
 #define FSL_EDMA_DRV_TCD64		BIT(15)
 /* All channel ERR IRQ share one IRQ line */
 #define FSL_EDMA_DRV_ERRIRQ_SHARE       BIT(16)
+/* MCF eDMA: Different register layout, no XOR for byte access */
+#define FSL_EDMA_DRV_MCF                BIT(17)
 
 
 #define FSL_EDMA_DRV_EDMA3	(FSL_EDMA_DRV_SPLIT_REG |	\
@@ -419,7 +421,8 @@ static inline void edma_writeb(struct fsl_edma_engine *edma,
 			       u8 val, void __iomem *addr)
 {
 	/* swap the reg offset for these in big-endian mode */
-	if (edma->big_endian)
+	/* MCF eDMA has different register layout, no XOR needed */
+	if (edma->big_endian && !(edma->drvdata->flags & FSL_EDMA_DRV_MCF))
 		iowrite8(val, (void __iomem *)((unsigned long)addr ^ 0x3));
 	else
 		iowrite8(val, addr);
diff --git a/drivers/dma/mcf-edma-main.c b/drivers/dma/mcf-edma-main.c
index 9e1c6400c77be237684855759382d7b7bd2e6ea0..f95114829d8006fe4558169888ff38037d7610de 100644
--- a/drivers/dma/mcf-edma-main.c
+++ b/drivers/dma/mcf-edma-main.c
@@ -145,7 +145,7 @@ static void mcf_edma_irq_free(struct platform_device *pdev,
 }
 
 static struct fsl_edma_drvdata mcf_data = {
-	.flags = FSL_EDMA_DRV_EDMA64,
+	.flags = FSL_EDMA_DRV_EDMA64 | FSL_EDMA_DRV_MCF,
 	.setup_irq = mcf_edma_irq_init,
 };
 

-- 
2.39.5