From: Frank Li <Frank.li@oss.nxp.com>
To: Linus Walleij <linusw@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>,
dmaengine@vger.kernel.org, phone-devel@vger.kernel.org,
sashiko-bot@kernel.org
Subject: Re: [PATCH v7 11/24] dmaengine: ste_dma40: Fix DMA registration unwind
Date: Mon, 28 Sep 2026 11:57:05 -0500 [thread overview]
Message-ID: <arqcYYhVRnSuuTRY@SMW015318> (raw)
In-Reply-To: <20260927-dma40-fixes-v7-11-89f595e8851d@kernel.org>
On Sun, Sep 27, 2026 at 11:03:24AM +0200, Linus Walleij wrote:
> d40_dmaengine_init() registers DMAengine devices using devres-managed
> unregister actions. If probe fails after one of those registrations, the
> DMAengine devices stay visible until devres unwinds after d40_probe()
> returns.
>
> The channel tasklets are also initialized before each DMAengine device is
> registered. An interrupt can therefore have queued a tasklet by the time a
> later registration step fails, but unregistering the DMAengine devices
> does not drain that tasklet before probe-owned storage is released.
>
> Add tasklet cleanup actions to the DMAengine registration devres group.
> Install each action before publishing its DMAengine device. If action
> registration fails, those tasklets have never been exposed and cannot have
> been scheduled, so use devm_add_action() without immediate reset cleanup.
>
> On later failure, free the IRQ before releasing the group so no new
> tasklets can be scheduled, then unregister the DMAengine devices and drain
> their tasklets before freeing the remaining probe resources. Keep the
> managed registrations and cleanup actions in place on successful probe by
> removing only the temporary group markers.
>
> Fixes: 42ae6f1695be ("dmaengine: ste_dma40: Remove platform data")
> Reported-by: sashiko-bot@kernel.org
> Closes: https://lore.kernel.org/dmaengine/20260819225215.5EA2F1F000E9@smtp.kernel.org/
> Assisted-by: LLM
> Signed-off-by: Linus Walleij <linusw@kernel.org>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> drivers/dma/ste_dma40.c | 45 +++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 43 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
> index 4c545a947264..f72d91c8d0fa 100644
> --- a/drivers/dma/ste_dma40.c
> +++ b/drivers/dma/ste_dma40.c
> @@ -3039,6 +3039,18 @@ static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma,
> }
> }
>
> +static void d40_kill_tasklets(void *data)
> +{
> + struct dma_device *dma = data;
> + struct d40_chan *d40c;
> + struct dma_chan *chan;
> +
> + list_for_each_entry(chan, &dma->channels, device_node) {
> + d40c = container_of(chan, struct d40_chan, chan);
> + tasklet_kill(&d40c->tasklet);
> + }
> +}
> +
> static void d40_ops_init(struct d40_base *base, struct dma_device *dev)
> {
> if (dma_has_cap(DMA_SLAVE, dev->cap_mask)) {
> @@ -3085,6 +3097,11 @@ static int __init d40_dmaengine_init(struct d40_base *base,
>
> d40_ops_init(base, &base->dma_slave);
>
> + err = devm_add_action(base->dev, d40_kill_tasklets,
> + &base->dma_slave);
> + if (err)
> + goto exit;
> +
> err = dmaenginem_async_device_register(&base->dma_slave);
>
> if (err) {
> @@ -3100,6 +3117,11 @@ static int __init d40_dmaengine_init(struct d40_base *base,
>
> d40_ops_init(base, &base->dma_memcpy);
>
> + err = devm_add_action(base->dev, d40_kill_tasklets,
> + &base->dma_memcpy);
> + if (err)
> + goto exit;
> +
> err = dmaenginem_async_device_register(&base->dma_memcpy);
>
> if (err) {
> @@ -3117,6 +3139,12 @@ static int __init d40_dmaengine_init(struct d40_base *base,
> dma_cap_set(DMA_CYCLIC, base->dma_both.cap_mask);
>
> d40_ops_init(base, &base->dma_both);
> +
> + err = devm_add_action(base->dev, d40_kill_tasklets,
> + &base->dma_both);
> + if (err)
> + goto exit;
> +
> err = dmaenginem_async_device_register(&base->dma_both);
>
> if (err) {
> @@ -3714,6 +3742,7 @@ static int __init d40_probe(struct platform_device *pdev)
> struct d40_base *base;
> struct resource *res;
> struct resource res_lcpa;
> + void *dmaenginem_reg_group;
> int num_reserved_chans;
> u32 val;
> int ret;
> @@ -3844,20 +3873,32 @@ static int __init d40_probe(struct platform_device *pdev)
> d40_err(dev, "No IRQ defined\n");
> goto destroy_cache;
> }
> +
> + dmaenginem_reg_group = devres_open_group(dev, NULL, GFP_KERNEL);
> + if (!dmaenginem_reg_group) {
> + ret = -ENOMEM;
> + goto release_irq;
> + }
> +
> ret = d40_dmaengine_init(base, num_reserved_chans);
> if (ret)
> - goto release_irq;
> + goto release_dmaenginem;
>
> ret = of_dma_controller_register(np, d40_xlate, NULL);
> if (ret) {
> dev_err(dev,
> "could not register of_dma_controller\n");
> - goto release_irq;
> + goto release_dmaenginem;
> }
> + devres_remove_group(dev, dmaenginem_reg_group);
>
> dev_info(base->dev, "initialized\n");
> return 0;
>
> + release_dmaenginem:
> + free_irq(base->irq, base);
> + devres_release_group(dev, dmaenginem_reg_group);
> + goto destroy_cache;
> release_irq:
> free_irq(base->irq, base);
> destroy_cache:
>
> --
> 2.55.0
>
next prev parent reply other threads:[~2026-09-28 16:57 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-27 9:03 [PATCH v7 00/24] dmaengine: ste_dma40: Fix numerous accumulated bugs Linus Walleij
2026-09-27 9:03 ` [PATCH v7 01/24] dmaengine: ste_dma40: Fix physical cyclic capability Linus Walleij
2026-09-27 9:03 ` [PATCH v7 02/24] dmaengine: ste_dma40: Fix cyclic transfer residue Linus Walleij
2026-09-27 9:03 ` [PATCH v7 03/24] dmaengine: ste_dma40: Recover coalesced cyclic callbacks Linus Walleij
2026-09-28 16:48 ` Frank Li
2026-09-27 9:03 ` [PATCH v7 04/24] dmaengine: ste_dma40: Fix failed start cleanup Linus Walleij
2026-09-27 9:03 ` [PATCH v7 05/24] dmaengine: ste_dma40: Fix probe runtime PM disable Linus Walleij
2026-09-27 9:03 ` [PATCH v7 06/24] dmaengine: ste_dma40: Check runtime PM in IRQ Linus Walleij
2026-09-27 9:24 ` sashiko-bot
2026-09-27 17:48 ` Linus Walleij
2026-09-27 9:03 ` [PATCH v7 07/24] dmaengine: ste_dma40: Handle runtime PM resume errors Linus Walleij
2026-09-27 9:03 ` [PATCH v7 08/24] dmaengine: ste_dma40: Return IRQ_NONE when no interrupt is pending Linus Walleij
2026-09-27 9:03 ` [PATCH v7 09/24] dmaengine: ste_dma40: Init hardware before registration Linus Walleij
2026-09-28 16:49 ` Frank Li
2026-09-27 9:03 ` [PATCH v7 10/24] dmaengine: ste_dma40: Fix probe IRQ leak Linus Walleij
2026-09-28 16:50 ` Frank Li
2026-09-27 9:03 ` [PATCH v7 11/24] dmaengine: ste_dma40: Fix DMA registration unwind Linus Walleij
2026-09-28 16:57 ` Frank Li [this message]
2026-09-27 9:03 ` [PATCH v7 12/24] dmaengine: ste_dma40: Fix LCLA allocation order Linus Walleij
2026-09-27 9:03 ` [PATCH v7 13/24] dmaengine: ste_dma40: Fix probe LCLA free Linus Walleij
2026-09-27 9:03 ` [PATCH v7 14/24] dmaengine: ste_dma40: Put the LCPA SRAM node Linus Walleij
2026-09-27 9:03 ` [PATCH v7 15/24] dmaengine: ste_dma40: Fix memcpy channel parsing Linus Walleij
2026-09-27 9:03 ` [PATCH v7 16/24] dmaengine: ste_dma40: Validate disabled channel indexes Linus Walleij
2026-09-27 9:03 ` [PATCH v7 17/24] dmaengine: ste_dma40: Validate DMA specifier length Linus Walleij
2026-09-27 9:03 ` [PATCH v7 18/24] dmaengine: ste_dma40: Reject direction changes after allocation Linus Walleij
2026-09-27 9:03 ` [PATCH v7 19/24] dmaengine: ste_dma40: Fix logical channel bounds check Linus Walleij
2026-09-28 16:58 ` Frank Li
2026-09-27 9:03 ` [PATCH v7 20/24] dmaengine: ste_dma40: Fix event group bounds Linus Walleij
2026-09-28 17:00 ` Frank Li
2026-09-27 9:03 ` [PATCH v7 21/24] dmaengine: ste_dma40: Fix V4B event group mapping Linus Walleij
2026-09-30 19:36 ` Frank Li
2026-09-27 9:03 ` [PATCH v7 22/24] dmaengine: ste_dma40: Search all blocks for fixed logical channels Linus Walleij
2026-10-05 15:39 ` Vinod Koul
2026-10-05 22:26 ` Linus Walleij
2026-09-27 9:03 ` [PATCH v7 23/24] dmaengine: ste_dma40: Validate fixed physical channel indexes Linus Walleij
2026-09-27 9:03 ` [PATCH v7 24/24] dmaengine: ste_dma40: Validate memcpy configuration Linus Walleij
2026-10-05 15:43 ` [PATCH v7 00/24] dmaengine: ste_dma40: Fix numerous accumulated bugs Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=arqcYYhVRnSuuTRY@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linusw@kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=sashiko-bot@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox