From: Prashant Gupta <prashant.gupta_3@nxp.com>
To: stephen@networkplumber.org, dev@dpdk.org
Cc: Gagandeep Singh <g.singh@nxp.com>
Subject: [PATCH v5-S1 4/5] dma/dpaa2: validate FLE pool IOVA mapping at vchan setup
Date: Tue, 29 Sep 2026 19:51:16 +0530 [thread overview]
Message-ID: <20260929142117.3109066-5-prashant.gupta_3@nxp.com> (raw)
In-Reply-To: <20260929142117.3109066-1-prashant.gupta_3@nxp.com>
From: Gagandeep Singh <g.singh@nxp.com>
After allocating the FLE mempool in dpaa2_qdma_vchan_setup(), iterate
over every memory chunk with rte_mempool_mem_iter() and verify that each
chunk is reachable through the IOMMU/SMMU by calling
DPAA2_VADDR_TO_IOVA_AND_CHECK(). If any chunk has no mapping, log the
pool name, release the pool with rte_mempool_free() and clear the pointer
to NULL before returning -ENOMEM, so that a subsequent vchan-setup retry
does not trip over a stale pool-name collision.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
---
drivers/dma/dpaa2/dpaa2_qdma.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/dpaa2/dpaa2_qdma.c b/drivers/dma/dpaa2/dpaa2_qdma.c
index 3b272f6593..409993ab08 100644
--- a/drivers/dma/dpaa2/dpaa2_qdma.c
+++ b/drivers/dma/dpaa2/dpaa2_qdma.c
@@ -1331,6 +1331,18 @@ dpaa2_qdma_vchan_rbp_set(struct qdma_virt_queue *vq,
return 0;
}
+static void
+dpaa2_qdma_fle_pool_iova_check(struct rte_mempool *mp __rte_unused,
+ void *opaque, struct rte_mempool_memhdr *memhdr,
+ unsigned int mem_idx __rte_unused)
+{
+ int *bad_map = opaque;
+
+ if (DPAA2_VADDR_TO_IOVA_AND_CHECK(memhdr->addr,
+ memhdr->len) == RTE_BAD_IOVA)
+ *bad_map = 1;
+}
+
static int
dpaa2_qdma_vchan_setup(struct rte_dma_dev *dev, uint16_t vchan,
const struct rte_dma_vchan_conf *conf,
@@ -1340,7 +1352,7 @@ dpaa2_qdma_vchan_setup(struct rte_dma_dev *dev, uint16_t vchan,
struct qdma_device *qdma_dev = dpdmai_dev->qdma_dev;
uint32_t pool_size;
char pool_name[64];
- int ret;
+ int ret, bad_map = 0;
uint64_t iova, va;
DPAA2_QDMA_FUNC_TRACE();
@@ -1381,6 +1393,15 @@ dpaa2_qdma_vchan_setup(struct rte_dma_dev *dev, uint16_t vchan,
va = qdma_dev->vqs[vchan].fle_pool->mz->addr_64;
qdma_dev->vqs[vchan].fle_iova2va_offset = va - iova;
+ rte_mempool_mem_iter(qdma_dev->vqs[vchan].fle_pool,
+ dpaa2_qdma_fle_pool_iova_check, &bad_map);
+ if (bad_map) {
+ DPAA2_QDMA_ERR("No IOMMU map for %s", pool_name);
+ rte_mempool_free(qdma_dev->vqs[vchan].fle_pool);
+ qdma_dev->vqs[vchan].fle_pool = NULL;
+ return -ENOMEM;
+ }
+
if (qdma_dev->is_silent) {
ret = rte_mempool_get_bulk(qdma_dev->vqs[vchan].fle_pool,
(void **)qdma_dev->vqs[vchan].cntx_sg,
next prev parent reply other threads:[~2026-09-29 14:21 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-15 11:34 [PATCH v3-S1 0/5] dpaa2: bus, DMA and mempool base fixes Prashant Gupta
2026-09-15 11:34 ` [PATCH v3-S1 1/5] bus/fslmc: defer bus initialization to probe Prashant Gupta
2026-09-15 11:34 ` [PATCH v3-S1 2/5] bus/fslmc: reduce probe-time logging and MC traffic Prashant Gupta
2026-09-15 11:34 ` [PATCH v3-S1 3/5] dma/dpaa2: fix array-bounds warning in dequeue path Prashant Gupta
2026-09-15 11:34 ` [PATCH v3-S1 4/5] dma/dpaa2: validate IOVA in pre-populate helpers Prashant Gupta
2026-09-15 11:34 ` [PATCH v3-S1 5/5] mempool/dpaa2: support ops index from primary in secondary Prashant Gupta
2026-09-15 15:24 ` [PATCH v3-S1 0/5] dpaa2: bus, DMA and mempool base fixes Stephen Hemminger
2026-09-22 9:21 ` [PATCH v4-S1 " Prashant Gupta
2026-09-22 9:21 ` [PATCH v4-S1 1/5] bus/fslmc: defer bus initialization to probe Prashant Gupta
2026-09-22 9:21 ` [PATCH v4-S1 2/5] bus/fslmc: reduce probe-time logging and MC traffic Prashant Gupta
2026-09-22 9:21 ` [PATCH v4-S1 3/5] dma/dpaa2: fix array-bounds warning in dequeue path Prashant Gupta
2026-09-22 9:21 ` [PATCH v4-S1 4/5] dma/dpaa2: validate IOVA in pre-populate helpers Prashant Gupta
2026-09-22 9:21 ` [PATCH v4-S1 5/5] mempool/dpaa2: support ops index from primary in secondary Prashant Gupta
2026-09-22 13:59 ` [PATCH v4-S1 0/5] dpaa2: bus, DMA and mempool base fixes Stephen Hemminger
2026-09-29 14:21 ` [PATCH v5-S1 " Prashant Gupta
2026-09-29 14:21 ` [PATCH v5-S1 1/5] bus/fslmc: defer bus initialization to probe Prashant Gupta
2026-09-29 14:21 ` [PATCH v5-S1 2/5] bus/fslmc: reduce probe-time logging and skip ignored devices Prashant Gupta
2026-09-29 14:21 ` [PATCH v5-S1 3/5] dma/dpaa2: fix array-bounds warning and SG FD double-put Prashant Gupta
2026-09-29 14:21 ` Prashant Gupta [this message]
2026-09-29 14:21 ` [PATCH v5-S1 5/5] mempool/dpaa2: look up ops index locally in secondary Prashant Gupta
2026-09-29 15:45 ` [PATCH v5-S1 0/5] dpaa2: bus, DMA and mempool base fixes Stephen Hemminger
2026-10-06 14:57 ` [EXT] " Prashant Gupta
2026-10-06 15:07 ` [PATCH v6-S1 0/6] " Prashant Gupta
2026-10-06 15:07 ` [PATCH v6-S1 1/6] bus/fslmc: defer bus initialization to probe Prashant Gupta
2026-10-06 15:07 ` [PATCH v6-S1 2/6] bus/fslmc: reduce probe logging and skip ignored devices Prashant Gupta
2026-10-06 15:07 ` [PATCH v6-S1 3/6] dma/dpaa2: use memcpy to fill completion index ring Prashant Gupta
2026-10-06 15:07 ` [PATCH v6-S1 4/6] dma/dpaa2: release SG FLE on completion ring overflow Prashant Gupta
2026-10-06 15:07 ` [PATCH v6-S1 5/6] dma/dpaa2: validate FLE pool IOVA mapping at vchan setup Prashant Gupta
2026-10-06 15:07 ` [PATCH v6-S1 6/6] mempool/dpaa2: look up ops index locally in secondary Prashant Gupta
2026-10-07 15:51 ` [PATCH v6-S1 0/6] dpaa2: bus, DMA and mempool base fixes Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260929142117.3109066-5-prashant.gupta_3@nxp.com \
--to=prashant.gupta_3@nxp.com \
--cc=dev@dpdk.org \
--cc=g.singh@nxp.com \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox