From: Steve Longerbeam <slongerbeam@gmail.com>
To: dri-devel@lists.freedesktop.org
Subject: [PATCH 00/72] staging imx-drm new features and fixes
Date: Fri, 31 Oct 2014 15:53:43 -0700 [thread overview]
Message-ID: <1414796095-10107-1-git-send-email-steve_longerbeam@mentor.com> (raw)
Hi, this affects only Freescale imx IPU and imx-drm staging drivers,
except for two patches that affect drm core (patch 53 and 63, see below).
New features for imx-drm staging driver:
- Support for multi-display (HDMI and LVDS).
- Support for global alpha and color-key properties for overlay plane.
- Support for gamma correction.
- The imx-drm crtc devices moved to device tree.
- Support for defining custom display interface pixel mappings in the
device tree.
- Implements encoder DPMS for LVDS.
- YUV planar pixel formats supported for DRM framebuffers.
- DDC support added for LVDS.
- Page flip handling moved to imx plane driver and implemented with
IPU double-buffering.
- Support page-flip in the overlay plane (patch 53 affects drm core).
- Add support for parsing pixel clock edge select (patch 63 affects drm core).
- Add LVDS connection detect via drm_probe_ddc().
- Implement crtc mode_set_base using plane page-flip.
Fixed issues:
- HDMI and LVDS now use different PLL clock roots (part of multi-display
support).
- Use counter added to IPU DC enable/disable (part of multi-display
support).
- Fixed some HDMI timing issues.
- Wider range of supported DI pixel clocks generated (all EDID modes
reported from HDMI displays now work).
- Fix separate primary plane objects.
- HDMI must select DI pre clock as DI clock parent during encoder prepare
(LVDS may have switched DI clock to LDB parent, part of multi-display
support).
- Assign correct DMFC burst size.
- Resolve some DI synchronous display error cases.
George G. Davis (1):
ARM: dts: imx6qdl-sabreauto: Add HDMI device
Jiada Wang (1):
gpu: ipu-v3: fix HDMI timing issues
Steve Longerbeam (70):
ARM: dts: imx6qdl-sabrelite: Add HDMI device
ARM: dts: imx6qdl: Create imx-drm crtc nodes
ARM: i.MX6: use pll2_pfd0_352m as clock root of ipu_di
ARM: i.MX6: select pll3_usb_otg for ldb_di for rev 1.0 chip
gpu: ipu-cpmem: Add ipu_cpmem_set_uv_offset()
gpu: ipu-v3: Add ipu_dp_set_chroma_key()
gpu: ipu-v3: Add ipu_dp_set_gamma_correction()
gpu: ipu-v3: Add support for dynamic DC interface pixel maps
gpu: ipu-v3: Add ipu_dc_uninit_sync()
gpu: ipu-v3: Pass struct ipu_dc to enable/disable
gpu: ipu-v3: Add ipu_dp_uninit_channel()
gpu: ipu-v3: Pass struct ipu_dp to enable/disable
gpu: ipu-v3: Implement use counter for ipu_dc_enable(),
ipu_dc_disable()
gpu: ipu-v3: Add DMFC/DP/DC/DI module enable/disable debug
gpu: ipu-v3: Add ipu_di_uninit_sync_panel()
gpu: ipu-v3: Split out DI clock enable/disable
gpu: ipu-v3: Protect more CM reg access with IPU lock
gpu: ipu-v3: Move DI waveform counter enable/disable to ipu-di
gpu: ipu-v3: Update DP sync SRM always in ipu_dp_enable_channel()
gpu: ipu-v3: Fix indent/ws in ipu-dmfc
gpu: ipu-v3: Allow burstsize of 20 in ipu_dmfc_setup_channel()
gpu: ipu-v3: Remove ipu_dmfc_init_channel()
gpu: ipu-v3: Consolidate mutex lock in ipu_dmfc_alloc_bandwidth()
gpu: ipu-v3: Enumerate the DC channel names
gpu: ipu-di: Move ipu pointer init
gpu: ipu-di: Add and improve debug/error messages
gpu: ipu-v3: Change signal names in struct ipu_di_signal_cfg
gpu: ipu-v3: Remove IPU client registration
gpu: ipu-di: Set rate of DI pre clock
gpu: ipu-v3: Add RGB666 interface pixel map
gpu: ipu-cpmem: Pass drm fourcc to ipu_cpmem_set_yuv_*
gpu: ipu-v3: Add ipu_drm_fourcc_is_planar()
gpu: ipu-v3: Add IDMA channel linking support
gpu: ipu-cpmem: Support YVU422
gpu: ipu-cpmem: Add ipu_cpmem_get_burstsize()
imx-drm: Crtcs moved to device tree
imx-drm: hdmi: optimize i2c write wait
imx-drm: parallel-display: Support RGB666 pixel fmt
imx-drm: imx-ldb: Add debug to connector/encoder entry points
imx-drm: imx-ldb: Implement imx_ldb_encoder_dpms()
imx-drm: parallel-display: Fix typo when setting mode type
imx-drm: ipuv3-plane: Fix planar formats
imx-drm: ipuv3-plane: Allow YUV space for background plane
imx-drm: ipuv3-plane: Add more supported pixel formats
imx-drm: ipuv3-plane: Implement global alpha and colorkey properties
imx-drm: hdmi: rework irq request/free
imx-drm: imx-ldb: Add DDC support
imx-drm: Fix separate primary plane objects
imx-drm: Move page flip handling to plane driver
imx-drm: Reset ipu unit pointers to NULL on errors
drm: implement page flipping support for planes
imx-drm: ipuv3-plane: Assign page_flip method to drm_plane_funcs
imx-drm: Implement DRM gamma set
imx-drm: Implement custom ioctl to set gamma
imx-drm: Add support for interface pixel maps
imx-drm: parallel-display: Add interface-pix-map DT property
imx-drm: hdmi: set DI clock source to DI pre clock
imx-drm: ipuv3-crtc: Set the crtc device name
imx-drm: hdmi: Save ipu/di mux for later iomux setup
imx-drm: ipuv3-plane: Assign correct dmfc burst size
drm_modes: videomode: add pos/neg pixel clock polarity flag
imx-drm: ipuv3-crtc: Use DRM mode flags to configure pixel clock
polarity
imx-drm: imx-ldb: Add all defined of video modes
imx-drm: parallel-display: Add all defined of video modes
imx-drm: ipuv3-crtc: Disable fb on crtc unbind
imx-drm: imx-ldb: Use DDC probe as connection detect
imx-drm: ipuv3-crtc: Implement mode_set_base
imx-drm: Cancel pending page flip events at preclose
imx-drm: ipuv3-crtc: Disable overlay plane during crtc disable
imx-drm: ipuv3-plane: Enable 8 burst locking
.../bindings/staging/imx-drm/fsl-imx-drm.txt | 43 +-
arch/arm/boot/dts/imx6dl.dtsi | 10 +-
arch/arm/boot/dts/imx6q.dtsi | 128 +++--
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 5 +
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 19 +
arch/arm/boot/dts/imx6qdl.dtsi | 125 ++---
arch/arm/mach-imx/clk-imx6q.c | 11 +-
drivers/gpu/drm/drm_crtc.c | 241 +++++----
drivers/gpu/drm/drm_ioctl.c | 1 +
drivers/gpu/drm/drm_modes.c | 4 +
drivers/gpu/ipu-v3/ipu-common.c | 303 +++++++-----
drivers/gpu/ipu-v3/ipu-cpmem.c | 99 ++--
drivers/gpu/ipu-v3/ipu-dc.c | 305 ++++++++----
drivers/gpu/ipu-v3/ipu-di.c | 300 +++++++++---
drivers/gpu/ipu-v3/ipu-dmfc.c | 94 ++--
drivers/gpu/ipu-v3/ipu-dp.c | 214 ++++++--
drivers/gpu/ipu-v3/ipu-prv.h | 1 +
drivers/staging/imx-drm/imx-drm-core.c | 190 +++++---
drivers/staging/imx-drm/imx-drm.h | 26 +-
drivers/staging/imx-drm/imx-hdmi.c | 77 ++-
drivers/staging/imx-drm/imx-ldb.c | 268 ++++++----
drivers/staging/imx-drm/imx-tve.c | 5 +-
drivers/staging/imx-drm/ipuv3-crtc.c | 515 ++++++++++++++------
drivers/staging/imx-drm/ipuv3-plane.c | 399 +++++++++++++--
drivers/staging/imx-drm/ipuv3-plane.h | 35 +-
drivers/staging/imx-drm/parallel-display.c | 78 ++-
include/drm/drm_crtc.h | 11 +
include/uapi/drm/drm.h | 1 +
include/uapi/drm/drm_mode.h | 12 +
include/uapi/drm/imx_drm.h | 30 ++
include/video/imx-ipu-v3.h | 86 +++-
31 files changed, 2557 insertions(+), 1079 deletions(-)
create mode 100644 include/uapi/drm/imx_drm.h
--
1.7.9.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2014-10-31 22:56 UTC|newest]
Thread overview: 115+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-31 22:53 Steve Longerbeam [this message]
2014-10-31 22:53 ` [PATCH 01/72] ARM: dts: imx6qdl-sabrelite: Add HDMI device Steve Longerbeam
2014-10-31 22:53 ` [PATCH 02/72] ARM: dts: imx6qdl-sabreauto: " Steve Longerbeam
2014-10-31 22:53 ` [PATCH 03/72] ARM: dts: imx6qdl: Create imx-drm crtc nodes Steve Longerbeam
2014-11-03 12:31 ` Philipp Zabel
2014-11-03 17:09 ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 04/72] ARM: i.MX6: use pll2_pfd0_352m as clock root of ipu_di Steve Longerbeam
2014-11-03 12:30 ` Philipp Zabel
2014-11-03 19:10 ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 05/72] ARM: i.MX6: select pll3_usb_otg for ldb_di for rev 1.0 chip Steve Longerbeam
2014-11-03 12:30 ` Philipp Zabel
2014-11-03 19:17 ` Steve Longerbeam
2014-11-03 20:06 ` Fabio Estevam
2014-11-04 2:38 ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 06/72] gpu: ipu-cpmem: Add ipu_cpmem_set_uv_offset() Steve Longerbeam
2014-11-03 12:30 ` Philipp Zabel
2014-11-03 22:52 ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 07/72] gpu: ipu-v3: Add ipu_dp_set_chroma_key() Steve Longerbeam
2014-11-03 12:31 ` Philipp Zabel
2014-11-04 1:55 ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 08/72] gpu: ipu-v3: Add ipu_dp_set_gamma_correction() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 09/72] gpu: ipu-v3: Add support for dynamic DC interface pixel maps Steve Longerbeam
2014-10-31 22:53 ` [PATCH 10/72] gpu: ipu-v3: Add ipu_dc_uninit_sync() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 11/72] gpu: ipu-v3: Pass struct ipu_dc to enable/disable Steve Longerbeam
2014-10-31 22:53 ` [PATCH 12/72] gpu: ipu-v3: Add ipu_dp_uninit_channel() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 13/72] gpu: ipu-v3: Pass struct ipu_dp to enable/disable Steve Longerbeam
2014-10-31 22:53 ` [PATCH 14/72] gpu: ipu-v3: Implement use counter for ipu_dc_enable(), ipu_dc_disable() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 15/72] gpu: ipu-v3: fix HDMI timing issues Steve Longerbeam
2014-10-31 22:53 ` [PATCH 16/72] gpu: ipu-v3: Add DMFC/DP/DC/DI module enable/disable debug Steve Longerbeam
2014-10-31 22:54 ` [PATCH 17/72] gpu: ipu-v3: Add ipu_di_uninit_sync_panel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 18/72] gpu: ipu-v3: Split out DI clock enable/disable Steve Longerbeam
2014-10-31 22:54 ` [PATCH 19/72] gpu: ipu-v3: Protect more CM reg access with IPU lock Steve Longerbeam
2014-11-04 17:51 ` Philipp Zabel
2014-11-05 1:54 ` Steve Longerbeam
2014-11-05 1:55 ` Steve Longerbeam
2014-10-31 22:54 ` [PATCH 20/72] gpu: ipu-v3: Move DI waveform counter enable/disable to ipu-di Steve Longerbeam
2014-10-31 22:54 ` [PATCH 21/72] gpu: ipu-v3: Update DP sync SRM always in ipu_dp_enable_channel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 22/72] gpu: ipu-v3: Fix indent/ws in ipu-dmfc Steve Longerbeam
2014-10-31 22:54 ` [PATCH 23/72] gpu: ipu-v3: Allow burstsize of 20 in ipu_dmfc_setup_channel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 24/72] gpu: ipu-v3: Remove ipu_dmfc_init_channel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 25/72] gpu: ipu-v3: Consolidate mutex lock in ipu_dmfc_alloc_bandwidth() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 26/72] gpu: ipu-v3: Enumerate the DC channel names Steve Longerbeam
2014-10-31 22:54 ` [PATCH 27/72] gpu: ipu-di: Move ipu pointer init Steve Longerbeam
2014-10-31 22:54 ` [PATCH 28/72] gpu: ipu-di: Add and improve debug/error messages Steve Longerbeam
2014-10-31 22:54 ` [PATCH 29/72] gpu: ipu-v3: Change signal names in struct ipu_di_signal_cfg Steve Longerbeam
2014-10-31 22:54 ` [PATCH 30/72] gpu: ipu-v3: Remove IPU client registration Steve Longerbeam
2014-10-31 22:54 ` [PATCH 31/72] gpu: ipu-di: Set rate of DI pre clock Steve Longerbeam
2014-10-31 22:54 ` [PATCH 32/72] gpu: ipu-v3: Add RGB666 interface pixel map Steve Longerbeam
2014-10-31 22:54 ` [PATCH 33/72] gpu: ipu-cpmem: Pass drm fourcc to ipu_cpmem_set_yuv_* Steve Longerbeam
2014-10-31 22:54 ` [PATCH 34/72] gpu: ipu-v3: Add ipu_drm_fourcc_is_planar() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 35/72] gpu: ipu-v3: Add IDMA channel linking support Steve Longerbeam
2014-10-31 22:54 ` [PATCH 36/72] gpu: ipu-cpmem: Support YVU422 Steve Longerbeam
2014-10-31 22:54 ` [PATCH 37/72] gpu: ipu-cpmem: Add ipu_cpmem_get_burstsize() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 38/72] imx-drm: Crtcs moved to device tree Steve Longerbeam
2014-10-31 22:54 ` [PATCH 39/72] imx-drm: hdmi: optimize i2c write wait Steve Longerbeam
2014-10-31 22:54 ` [PATCH 40/72] imx-drm: parallel-display: Support RGB666 pixel fmt Steve Longerbeam
2014-10-31 22:54 ` [PATCH 41/72] imx-drm: imx-ldb: Add debug to connector/encoder entry points Steve Longerbeam
2014-10-31 22:54 ` [PATCH 42/72] imx-drm: imx-ldb: Implement imx_ldb_encoder_dpms() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 43/72] imx-drm: parallel-display: Fix typo when setting mode type Steve Longerbeam
2014-10-31 22:54 ` [PATCH 44/72] imx-drm: ipuv3-plane: Fix planar formats Steve Longerbeam
2014-10-31 22:54 ` [PATCH 45/72] imx-drm: ipuv3-plane: Allow YUV space for background plane Steve Longerbeam
2014-10-31 22:54 ` [PATCH 46/72] imx-drm: ipuv3-plane: Add more supported pixel formats Steve Longerbeam
2014-10-31 22:54 ` [PATCH 47/72] imx-drm: ipuv3-plane: Implement global alpha and colorkey properties Steve Longerbeam
2014-10-31 22:54 ` [PATCH 48/72] imx-drm: hdmi: rework irq request/free Steve Longerbeam
2014-10-31 22:54 ` [PATCH 49/72] imx-drm: imx-ldb: Add DDC support Steve Longerbeam
2014-11-04 17:52 ` Philipp Zabel
2014-10-31 22:54 ` [PATCH 50/72] imx-drm: Fix separate primary plane objects Steve Longerbeam
2014-10-31 22:54 ` [PATCH 51/72] imx-drm: Move page flip handling to plane driver Steve Longerbeam
2014-10-31 22:54 ` [PATCH 52/72] imx-drm: Reset ipu unit pointers to NULL on errors Steve Longerbeam
2014-10-31 22:54 ` [PATCH 53/72] drm: implement page flipping support for planes Steve Longerbeam
2014-11-01 13:25 ` Rob Clark
2014-10-31 22:54 ` [PATCH 54/72] imx-drm: ipuv3-plane: Assign page_flip method to drm_plane_funcs Steve Longerbeam
2014-10-31 22:54 ` [PATCH 55/72] imx-drm: Implement DRM gamma set Steve Longerbeam
2014-10-31 22:54 ` [PATCH 56/72] imx-drm: Implement custom ioctl to set gamma Steve Longerbeam
2014-10-31 22:54 ` [PATCH 57/72] imx-drm: Add support for interface pixel maps Steve Longerbeam
2014-10-31 22:54 ` [PATCH 58/72] imx-drm: parallel-display: Add interface-pix-map DT property Steve Longerbeam
2014-10-31 22:54 ` [PATCH 59/72] imx-drm: hdmi: set DI clock source to DI pre clock Steve Longerbeam
2014-10-31 22:54 ` [PATCH 60/72] imx-drm: ipuv3-crtc: Set the crtc device name Steve Longerbeam
2014-10-31 22:54 ` [PATCH 61/72] imx-drm: hdmi: Save ipu/di mux for later iomux setup Steve Longerbeam
2014-10-31 22:54 ` [PATCH 62/72] imx-drm: ipuv3-plane: Assign correct dmfc burst size Steve Longerbeam
2014-10-31 22:54 ` [PATCH 63/72] drm_modes: videomode: add pos/neg pixel clock polarity flag Steve Longerbeam
2014-10-31 22:54 ` [PATCH 64/72] imx-drm: ipuv3-crtc: Use DRM mode flags to configure pixel clock polarity Steve Longerbeam
2014-10-31 22:54 ` [PATCH 65/72] imx-drm: imx-ldb: Add all defined of video modes Steve Longerbeam
2014-10-31 22:54 ` [PATCH 66/72] imx-drm: parallel-display: " Steve Longerbeam
2014-10-31 22:54 ` [PATCH 67/72] imx-drm: ipuv3-crtc: Disable fb on crtc unbind Steve Longerbeam
2014-10-31 22:54 ` [PATCH 68/72] imx-drm: imx-ldb: Use DDC probe as connection detect Steve Longerbeam
2014-11-04 17:57 ` Philipp Zabel
2014-10-31 22:54 ` [PATCH 69/72] imx-drm: ipuv3-crtc: Implement mode_set_base Steve Longerbeam
2014-10-31 22:54 ` [PATCH 70/72] imx-drm: Cancel pending page flip events at preclose Steve Longerbeam
2014-10-31 22:54 ` [PATCH 71/72] imx-drm: ipuv3-crtc: Disable overlay plane during crtc disable Steve Longerbeam
2014-10-31 22:54 ` [PATCH 72/72] imx-drm: ipuv3-plane: Enable 8 burst locking Steve Longerbeam
2014-11-01 0:09 ` [PATCH 00/72] staging imx-drm new features and fixes Fabio Estevam
2014-11-01 0:19 ` Steve Longerbeam
2014-11-03 13:12 ` Fabio Estevam
2014-11-03 13:17 ` Fabio Estevam
2014-11-03 13:20 ` Fabio Estevam
2014-11-03 14:13 ` Fabio Estevam
2014-11-03 22:41 ` Steve Longerbeam
2014-11-04 15:15 ` Fabio Estevam
2014-11-02 3:03 ` Steve Longerbeam
2014-11-03 11:17 ` Zubair Lutfullah Kakakhel
2014-11-03 16:04 ` Rob Clark
2014-11-03 16:12 ` Daniel Vetter
2014-11-03 16:14 ` Greg KH
2014-11-03 17:17 ` Daniel Vetter
2014-11-03 17:48 ` Greg KH
2014-11-03 18:58 ` Steve Longerbeam
2014-11-04 2:32 ` Alex Deucher
2014-11-03 18:59 ` Steve Longerbeam
2014-11-03 20:00 ` Fabio Estevam
2014-11-03 22:11 ` Steve Longerbeam
2014-11-04 9:35 ` Philipp Zabel
2014-11-05 1:20 ` Steve Longerbeam
2015-01-17 19:45 ` Fabio Estevam
2015-01-21 17:22 ` Rob Clark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414796095-10107-1-git-send-email-steve_longerbeam@mentor.com \
--to=slongerbeam@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox