dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Philipp Zabel <p.zabel@pengutronix.de>
To: Steve Longerbeam <slongerbeam@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 07/72] gpu: ipu-v3: Add ipu_dp_set_chroma_key()
Date: Mon, 03 Nov 2014 13:31:22 +0100	[thread overview]
Message-ID: <1415017882.3060.19.camel@pengutronix.de> (raw)
In-Reply-To: <1414796095-10107-8-git-send-email-steve_longerbeam@mentor.com>

Am Freitag, den 31.10.2014, 15:53 -0700 schrieb Steve Longerbeam:
> Adds the function ipu_dp_set_chroma_key(), which sets up a color key
> value for a DP foreground plane.
> 
> ipu_dp_set_chroma_key() accepts a color key value in RGB24 format.
> If the combiner unit colorspace is YUV, the key must be converted
> to YUV444, using the same CSC coefficients as programmed in the DP.
> So pull out the CSC coefficients from ipu_dp_csc_init() to make
> them available to rgb24_to_yuv444() that converts to color key.

What is the rationale to disallow specifying the color key in YUV?
Regardless of the new feature, I like the move to static const
coefficient tables. Maybe split that into two patches?

regards
Philipp

> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
> ---
>  drivers/gpu/ipu-v3/ipu-dp.c |  121 ++++++++++++++++++++++++++++++++++++-------
>  include/video/imx-ipu-v3.h  |    1 +
>  2 files changed, 103 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/gpu/ipu-v3/ipu-dp.c b/drivers/gpu/ipu-v3/ipu-dp.c
> index 98686ed..e4026f1 100644
> --- a/drivers/gpu/ipu-v3/ipu-dp.c
> +++ b/drivers/gpu/ipu-v3/ipu-dp.c
> @@ -84,6 +84,52 @@ static inline struct ipu_flow *to_flow(struct ipu_dp *dp)
>  		return container_of(dp, struct ipu_flow, background);
>  }
>  
> +static const int rgb2yuv_coeff[5][3] = {
> +	{ 0x0099, 0x012d, 0x003a },
> +	{ 0x03a9, 0x0356, 0x0100 },
> +	{ 0x0100, 0x0329, 0x03d6 },
> +	{ 0x0000, 0x0200, 0x0200 }, /* B0, B1, B2 */
> +	{ 0x2,    0x2,    0x2 },    /* S0, S1, S2 */
> +};
> +
> +static const int yuv2rgb_coeff[5][3] = {
> +	{ 0x0095, 0x0000, 0x00cc },
> +	{ 0x0095, 0x03ce, 0x0398 },
> +	{ 0x0095, 0x00ff, 0x0000 },
> +	{ 0x3e42, 0x010a, 0x3dd6 }, /* B0,B1,B2 */
> +	{ 0x1,    0x1,    0x1 },    /* S0,S1,S2 */
> +};
> +
> +/*
> + * This is used to convert an RGB24 color key to YUV444, using
> + * the same CSC coefficients as programmed in the DP.
> + */
> +static u32 rgb24_to_yuv444(u32 rgb24)
> +{
> +	u32 red, green, blue;
> +	int i, c[3];
> +
> +	red   = (rgb24 >> 16) & 0xff;
> +	green = (rgb24 >>  8) & 0xff;
> +	blue  = (rgb24 >>  0) & 0xff;
> +
> +	for (i = 0; i < 3; i++) {
> +		c[i] = red * rgb2yuv_coeff[i][0];
> +		c[i] += green * rgb2yuv_coeff[i][1];
> +		c[i] += blue * rgb2yuv_coeff[i][2];
> +		c[i] /= 16;
> +		c[i] += rgb2yuv_coeff[3][i] * 4;
> +		c[i] += 8;
> +		c[i] /= 16;
> +		if (c[i] < 0)
> +			c[i] = 0;
> +		if (c[i] > 255)
> +			c[i] = 255;
> +	}
> +
> +	return (c[0] << 16) | (c[1] << 8) | c[2];
> +}
> +
>  int ipu_dp_set_global_alpha(struct ipu_dp *dp, bool enable,
>  		u8 alpha, bool bg_chan)
>  {
> @@ -120,6 +166,48 @@ int ipu_dp_set_global_alpha(struct ipu_dp *dp, bool enable,
>  }
>  EXPORT_SYMBOL_GPL(ipu_dp_set_global_alpha);
>  
> +/*
> + * The input color_key must always be RGB24. It will be converted to
> + * YUV444 if the pixel format to the Combining unit is YUV space.
> + */
> +int ipu_dp_set_chroma_key(struct ipu_dp *dp, bool enable, u32 color_key)
> +{
> +	struct ipu_flow *flow = to_flow(dp);
> +	struct ipu_dp_priv *priv = flow->priv;
> +	enum ipu_color_space combiner_cs;
> +	u32 reg;
> +
> +	mutex_lock(&priv->mutex);
> +
> +	if (flow->foreground.in_cs == flow->background.in_cs)
> +		combiner_cs = flow->foreground.in_cs;
> +	else
> +		combiner_cs = flow->out_cs;
> +
> +	if (combiner_cs == IPUV3_COLORSPACE_YUV)
> +		color_key = rgb24_to_yuv444(color_key);
> +
> +	color_key &= 0x00ffffff;
> +
> +	if (enable) {
> +		reg = readl(flow->base + DP_GRAPH_WIND_CTRL) & ~0x00FFFFFFL;
> +		writel(reg | color_key, flow->base + DP_GRAPH_WIND_CTRL);
> +
> +		reg = readl(flow->base + DP_COM_CONF);
> +		writel(reg | DP_COM_CONF_GWCKE, flow->base + DP_COM_CONF);
> +	} else {
> +		reg = readl(flow->base + DP_COM_CONF);
> +		writel(reg & ~DP_COM_CONF_GWCKE, flow->base + DP_COM_CONF);
> +	}
> +
> +	ipu_srm_dp_sync_update(priv->ipu);
> +
> +	mutex_unlock(&priv->mutex);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(ipu_dp_set_chroma_key);
> +
>  int ipu_dp_set_window_pos(struct ipu_dp *dp, u16 x_pos, u16 y_pos)
>  {
>  	struct ipu_flow *flow = to_flow(dp);
> @@ -138,6 +226,7 @@ static void ipu_dp_csc_init(struct ipu_flow *flow,
>  		enum ipu_color_space out,
>  		u32 place)
>  {
> +	const int (*c)[3];
>  	u32 reg;
>  
>  	reg = readl(flow->base + DP_COM_CONF);
> @@ -148,25 +237,19 @@ static void ipu_dp_csc_init(struct ipu_flow *flow,
>  		return;
>  	}
>  
> -	if (in == IPUV3_COLORSPACE_RGB && out == IPUV3_COLORSPACE_YUV) {
> -		writel(0x099 | (0x12d << 16), flow->base + DP_CSC_A_0);
> -		writel(0x03a | (0x3a9 << 16), flow->base + DP_CSC_A_1);
> -		writel(0x356 | (0x100 << 16), flow->base + DP_CSC_A_2);
> -		writel(0x100 | (0x329 << 16), flow->base + DP_CSC_A_3);
> -		writel(0x3d6 | (0x0000 << 16) | (2 << 30),
> -				flow->base + DP_CSC_0);
> -		writel(0x200 | (2 << 14) | (0x200 << 16) | (2 << 30),
> -				flow->base + DP_CSC_1);
> -	} else {
> -		writel(0x095 | (0x000 << 16), flow->base + DP_CSC_A_0);
> -		writel(0x0cc | (0x095 << 16), flow->base + DP_CSC_A_1);
> -		writel(0x3ce | (0x398 << 16), flow->base + DP_CSC_A_2);
> -		writel(0x095 | (0x0ff << 16), flow->base + DP_CSC_A_3);
> -		writel(0x000 | (0x3e42 << 16) | (1 << 30),
> -				flow->base + DP_CSC_0);
> -		writel(0x10a | (1 << 14) | (0x3dd6 << 16) | (1 << 30),
> -				flow->base + DP_CSC_1);
> -	}
> +	if (in == IPUV3_COLORSPACE_RGB && out == IPUV3_COLORSPACE_YUV)
> +		c = rgb2yuv_coeff;
> +	else
> +		c = yuv2rgb_coeff;
> +
> +	writel(c[0][0] | (c[0][1] << 16), flow->base + DP_CSC_A_0);
> +	writel(c[0][2] | (c[1][0] << 16), flow->base + DP_CSC_A_1);
> +	writel(c[1][1] | (c[1][2] << 16), flow->base + DP_CSC_A_2);
> +	writel(c[2][0] | (c[2][1] << 16), flow->base + DP_CSC_A_3);
> +	writel(c[2][2] | (c[3][0] << 16) | (c[4][0] << 30),
> +	       flow->base + DP_CSC_0);
> +	writel(c[3][1] | (c[4][1] << 14) | (c[3][2] << 16) | (c[4][2] << 30),
> +	       flow->base + DP_CSC_1);
>  
>  	reg |= place;
>  
> diff --git a/include/video/imx-ipu-v3.h b/include/video/imx-ipu-v3.h
> index 03cda50..e878343 100644
> --- a/include/video/imx-ipu-v3.h
> +++ b/include/video/imx-ipu-v3.h
> @@ -273,6 +273,7 @@ int ipu_dp_setup_channel(struct ipu_dp *dp,
>  int ipu_dp_set_window_pos(struct ipu_dp *, u16 x_pos, u16 y_pos);
>  int ipu_dp_set_global_alpha(struct ipu_dp *dp, bool enable, u8 alpha,
>  		bool bg_chan);
> +int ipu_dp_set_chroma_key(struct ipu_dp *dp, bool enable, u32 color_key);
>  
>  /*
>   * IPU CMOS Sensor Interface (csi) functions


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2014-11-03 12:31 UTC|newest]

Thread overview: 115+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-31 22:53 [PATCH 00/72] staging imx-drm new features and fixes Steve Longerbeam
2014-10-31 22:53 ` [PATCH 01/72] ARM: dts: imx6qdl-sabrelite: Add HDMI device Steve Longerbeam
2014-10-31 22:53 ` [PATCH 02/72] ARM: dts: imx6qdl-sabreauto: " Steve Longerbeam
2014-10-31 22:53 ` [PATCH 03/72] ARM: dts: imx6qdl: Create imx-drm crtc nodes Steve Longerbeam
2014-11-03 12:31   ` Philipp Zabel
2014-11-03 17:09     ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 04/72] ARM: i.MX6: use pll2_pfd0_352m as clock root of ipu_di Steve Longerbeam
2014-11-03 12:30   ` Philipp Zabel
2014-11-03 19:10     ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 05/72] ARM: i.MX6: select pll3_usb_otg for ldb_di for rev 1.0 chip Steve Longerbeam
2014-11-03 12:30   ` Philipp Zabel
2014-11-03 19:17     ` Steve Longerbeam
2014-11-03 20:06       ` Fabio Estevam
2014-11-04  2:38         ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 06/72] gpu: ipu-cpmem: Add ipu_cpmem_set_uv_offset() Steve Longerbeam
2014-11-03 12:30   ` Philipp Zabel
2014-11-03 22:52     ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 07/72] gpu: ipu-v3: Add ipu_dp_set_chroma_key() Steve Longerbeam
2014-11-03 12:31   ` Philipp Zabel [this message]
2014-11-04  1:55     ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 08/72] gpu: ipu-v3: Add ipu_dp_set_gamma_correction() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 09/72] gpu: ipu-v3: Add support for dynamic DC interface pixel maps Steve Longerbeam
2014-10-31 22:53 ` [PATCH 10/72] gpu: ipu-v3: Add ipu_dc_uninit_sync() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 11/72] gpu: ipu-v3: Pass struct ipu_dc to enable/disable Steve Longerbeam
2014-10-31 22:53 ` [PATCH 12/72] gpu: ipu-v3: Add ipu_dp_uninit_channel() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 13/72] gpu: ipu-v3: Pass struct ipu_dp to enable/disable Steve Longerbeam
2014-10-31 22:53 ` [PATCH 14/72] gpu: ipu-v3: Implement use counter for ipu_dc_enable(), ipu_dc_disable() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 15/72] gpu: ipu-v3: fix HDMI timing issues Steve Longerbeam
2014-10-31 22:53 ` [PATCH 16/72] gpu: ipu-v3: Add DMFC/DP/DC/DI module enable/disable debug Steve Longerbeam
2014-10-31 22:54 ` [PATCH 17/72] gpu: ipu-v3: Add ipu_di_uninit_sync_panel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 18/72] gpu: ipu-v3: Split out DI clock enable/disable Steve Longerbeam
2014-10-31 22:54 ` [PATCH 19/72] gpu: ipu-v3: Protect more CM reg access with IPU lock Steve Longerbeam
2014-11-04 17:51   ` Philipp Zabel
2014-11-05  1:54     ` Steve Longerbeam
2014-11-05  1:55     ` Steve Longerbeam
2014-10-31 22:54 ` [PATCH 20/72] gpu: ipu-v3: Move DI waveform counter enable/disable to ipu-di Steve Longerbeam
2014-10-31 22:54 ` [PATCH 21/72] gpu: ipu-v3: Update DP sync SRM always in ipu_dp_enable_channel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 22/72] gpu: ipu-v3: Fix indent/ws in ipu-dmfc Steve Longerbeam
2014-10-31 22:54 ` [PATCH 23/72] gpu: ipu-v3: Allow burstsize of 20 in ipu_dmfc_setup_channel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 24/72] gpu: ipu-v3: Remove ipu_dmfc_init_channel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 25/72] gpu: ipu-v3: Consolidate mutex lock in ipu_dmfc_alloc_bandwidth() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 26/72] gpu: ipu-v3: Enumerate the DC channel names Steve Longerbeam
2014-10-31 22:54 ` [PATCH 27/72] gpu: ipu-di: Move ipu pointer init Steve Longerbeam
2014-10-31 22:54 ` [PATCH 28/72] gpu: ipu-di: Add and improve debug/error messages Steve Longerbeam
2014-10-31 22:54 ` [PATCH 29/72] gpu: ipu-v3: Change signal names in struct ipu_di_signal_cfg Steve Longerbeam
2014-10-31 22:54 ` [PATCH 30/72] gpu: ipu-v3: Remove IPU client registration Steve Longerbeam
2014-10-31 22:54 ` [PATCH 31/72] gpu: ipu-di: Set rate of DI pre clock Steve Longerbeam
2014-10-31 22:54 ` [PATCH 32/72] gpu: ipu-v3: Add RGB666 interface pixel map Steve Longerbeam
2014-10-31 22:54 ` [PATCH 33/72] gpu: ipu-cpmem: Pass drm fourcc to ipu_cpmem_set_yuv_* Steve Longerbeam
2014-10-31 22:54 ` [PATCH 34/72] gpu: ipu-v3: Add ipu_drm_fourcc_is_planar() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 35/72] gpu: ipu-v3: Add IDMA channel linking support Steve Longerbeam
2014-10-31 22:54 ` [PATCH 36/72] gpu: ipu-cpmem: Support YVU422 Steve Longerbeam
2014-10-31 22:54 ` [PATCH 37/72] gpu: ipu-cpmem: Add ipu_cpmem_get_burstsize() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 38/72] imx-drm: Crtcs moved to device tree Steve Longerbeam
2014-10-31 22:54 ` [PATCH 39/72] imx-drm: hdmi: optimize i2c write wait Steve Longerbeam
2014-10-31 22:54 ` [PATCH 40/72] imx-drm: parallel-display: Support RGB666 pixel fmt Steve Longerbeam
2014-10-31 22:54 ` [PATCH 41/72] imx-drm: imx-ldb: Add debug to connector/encoder entry points Steve Longerbeam
2014-10-31 22:54 ` [PATCH 42/72] imx-drm: imx-ldb: Implement imx_ldb_encoder_dpms() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 43/72] imx-drm: parallel-display: Fix typo when setting mode type Steve Longerbeam
2014-10-31 22:54 ` [PATCH 44/72] imx-drm: ipuv3-plane: Fix planar formats Steve Longerbeam
2014-10-31 22:54 ` [PATCH 45/72] imx-drm: ipuv3-plane: Allow YUV space for background plane Steve Longerbeam
2014-10-31 22:54 ` [PATCH 46/72] imx-drm: ipuv3-plane: Add more supported pixel formats Steve Longerbeam
2014-10-31 22:54 ` [PATCH 47/72] imx-drm: ipuv3-plane: Implement global alpha and colorkey properties Steve Longerbeam
2014-10-31 22:54 ` [PATCH 48/72] imx-drm: hdmi: rework irq request/free Steve Longerbeam
2014-10-31 22:54 ` [PATCH 49/72] imx-drm: imx-ldb: Add DDC support Steve Longerbeam
2014-11-04 17:52   ` Philipp Zabel
2014-10-31 22:54 ` [PATCH 50/72] imx-drm: Fix separate primary plane objects Steve Longerbeam
2014-10-31 22:54 ` [PATCH 51/72] imx-drm: Move page flip handling to plane driver Steve Longerbeam
2014-10-31 22:54 ` [PATCH 52/72] imx-drm: Reset ipu unit pointers to NULL on errors Steve Longerbeam
2014-10-31 22:54 ` [PATCH 53/72] drm: implement page flipping support for planes Steve Longerbeam
2014-11-01 13:25   ` Rob Clark
2014-10-31 22:54 ` [PATCH 54/72] imx-drm: ipuv3-plane: Assign page_flip method to drm_plane_funcs Steve Longerbeam
2014-10-31 22:54 ` [PATCH 55/72] imx-drm: Implement DRM gamma set Steve Longerbeam
2014-10-31 22:54 ` [PATCH 56/72] imx-drm: Implement custom ioctl to set gamma Steve Longerbeam
2014-10-31 22:54 ` [PATCH 57/72] imx-drm: Add support for interface pixel maps Steve Longerbeam
2014-10-31 22:54 ` [PATCH 58/72] imx-drm: parallel-display: Add interface-pix-map DT property Steve Longerbeam
2014-10-31 22:54 ` [PATCH 59/72] imx-drm: hdmi: set DI clock source to DI pre clock Steve Longerbeam
2014-10-31 22:54 ` [PATCH 60/72] imx-drm: ipuv3-crtc: Set the crtc device name Steve Longerbeam
2014-10-31 22:54 ` [PATCH 61/72] imx-drm: hdmi: Save ipu/di mux for later iomux setup Steve Longerbeam
2014-10-31 22:54 ` [PATCH 62/72] imx-drm: ipuv3-plane: Assign correct dmfc burst size Steve Longerbeam
2014-10-31 22:54 ` [PATCH 63/72] drm_modes: videomode: add pos/neg pixel clock polarity flag Steve Longerbeam
2014-10-31 22:54 ` [PATCH 64/72] imx-drm: ipuv3-crtc: Use DRM mode flags to configure pixel clock polarity Steve Longerbeam
2014-10-31 22:54 ` [PATCH 65/72] imx-drm: imx-ldb: Add all defined of video modes Steve Longerbeam
2014-10-31 22:54 ` [PATCH 66/72] imx-drm: parallel-display: " Steve Longerbeam
2014-10-31 22:54 ` [PATCH 67/72] imx-drm: ipuv3-crtc: Disable fb on crtc unbind Steve Longerbeam
2014-10-31 22:54 ` [PATCH 68/72] imx-drm: imx-ldb: Use DDC probe as connection detect Steve Longerbeam
2014-11-04 17:57   ` Philipp Zabel
2014-10-31 22:54 ` [PATCH 69/72] imx-drm: ipuv3-crtc: Implement mode_set_base Steve Longerbeam
2014-10-31 22:54 ` [PATCH 70/72] imx-drm: Cancel pending page flip events at preclose Steve Longerbeam
2014-10-31 22:54 ` [PATCH 71/72] imx-drm: ipuv3-crtc: Disable overlay plane during crtc disable Steve Longerbeam
2014-10-31 22:54 ` [PATCH 72/72] imx-drm: ipuv3-plane: Enable 8 burst locking Steve Longerbeam
2014-11-01  0:09 ` [PATCH 00/72] staging imx-drm new features and fixes Fabio Estevam
2014-11-01  0:19   ` Steve Longerbeam
2014-11-03 13:12     ` Fabio Estevam
2014-11-03 13:17       ` Fabio Estevam
2014-11-03 13:20       ` Fabio Estevam
2014-11-03 14:13         ` Fabio Estevam
2014-11-03 22:41           ` Steve Longerbeam
2014-11-04 15:15             ` Fabio Estevam
2014-11-02  3:03   ` Steve Longerbeam
2014-11-03 11:17 ` Zubair Lutfullah Kakakhel
2014-11-03 16:04   ` Rob Clark
2014-11-03 16:12 ` Daniel Vetter
2014-11-03 16:14   ` Greg KH
2014-11-03 17:17     ` Daniel Vetter
2014-11-03 17:48       ` Greg KH
2014-11-03 18:58         ` Steve Longerbeam
2014-11-04  2:32           ` Alex Deucher
2014-11-03 18:59         ` Steve Longerbeam
2014-11-03 20:00           ` Fabio Estevam
2014-11-03 22:11             ` Steve Longerbeam
2014-11-04  9:35           ` Philipp Zabel
2014-11-05  1:20             ` Steve Longerbeam
2015-01-17 19:45               ` Fabio Estevam
2015-01-21 17:22 ` Rob Clark

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1415017882.3060.19.camel@pengutronix.de \
    --to=p.zabel@pengutronix.de \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=slongerbeam@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox