From: Steve Longerbeam <slongerbeam@gmail.com>
To: dri-devel@lists.freedesktop.org
Subject: [PATCH 18/72] gpu: ipu-v3: Split out DI clock enable/disable
Date: Fri, 31 Oct 2014 15:54:01 -0700 [thread overview]
Message-ID: <1414796095-10107-19-git-send-email-steve_longerbeam@mentor.com> (raw)
In-Reply-To: <1414796095-10107-1-git-send-email-steve_longerbeam@mentor.com>
DI clock enable/disable is moved out of ipu_di_enable() and ipu_di_disable()
and into (new) ipu_di_enable_clock() and ipu_di_disable_clock(). So
ipu_di_enable() and ipu_di_disable() are now pure module enable/disable.
The purpose of this change is to more closely emulate the display mode
setting sequence in FSL kernels, which enable and disable the DI
clock as the very last steps during legacy fbdev set_par().
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
---
drivers/gpu/ipu-v3/ipu-di.c | 20 +++++++++++++-------
drivers/staging/imx-drm/ipuv3-crtc.c | 2 ++
include/video/imx-ipu-v3.h | 2 ++
3 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c
index 9841419..7ab19a3 100644
--- a/drivers/gpu/ipu-v3/ipu-di.c
+++ b/drivers/gpu/ipu-v3/ipu-di.c
@@ -659,14 +659,8 @@ EXPORT_SYMBOL(ipu_di_uninit_sync_panel);
int ipu_di_enable(struct ipu_di *di)
{
- int ret;
-
WARN_ON(IS_ERR(di->clk_di_pixel));
- ret = clk_prepare_enable(di->clk_di_pixel);
- if (ret)
- return ret;
-
dev_dbg(di->ipu->dev, "DI%d enable\n", di->id);
ipu_module_enable(di->ipu, di->module);
@@ -674,6 +668,12 @@ int ipu_di_enable(struct ipu_di *di)
}
EXPORT_SYMBOL_GPL(ipu_di_enable);
+int ipu_di_enable_clock(struct ipu_di *di)
+{
+ return clk_prepare_enable(di->clk_di_pixel);
+}
+EXPORT_SYMBOL_GPL(ipu_di_enable_clock);
+
int ipu_di_disable(struct ipu_di *di)
{
WARN_ON(IS_ERR(di->clk_di_pixel));
@@ -681,11 +681,17 @@ int ipu_di_disable(struct ipu_di *di)
dev_dbg(di->ipu->dev, "DI%d disable\n", di->id);
ipu_module_disable(di->ipu, di->module);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ipu_di_disable);
+
+int ipu_di_disable_clock(struct ipu_di *di)
+{
clk_disable_unprepare(di->clk_di_pixel);
return 0;
}
-EXPORT_SYMBOL_GPL(ipu_di_disable);
+EXPORT_SYMBOL_GPL(ipu_di_disable_clock);
int ipu_di_get_num(struct ipu_di *di)
{
diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c
index 7053619..be24cb9 100644
--- a/drivers/staging/imx-drm/ipuv3-crtc.c
+++ b/drivers/staging/imx-drm/ipuv3-crtc.c
@@ -68,6 +68,7 @@ static void ipu_fb_enable(struct ipu_crtc *ipu_crtc)
/* Start DC channel and DI after IDMAC */
ipu_dc_enable_channel(ipu_crtc->dc);
ipu_di_enable(ipu_crtc->di);
+ ipu_di_enable_clock(ipu_crtc->di);
ipu_crtc->enabled = 1;
}
@@ -82,6 +83,7 @@ static void ipu_fb_disable(struct ipu_crtc *ipu_crtc)
ipu_di_disable(ipu_crtc->di);
ipu_plane_disable(ipu_crtc->plane[0]);
ipu_dc_disable(ipu_crtc->dc);
+ ipu_di_disable_clock(ipu_crtc->di);
ipu_crtc->enabled = 0;
}
diff --git a/include/video/imx-ipu-v3.h b/include/video/imx-ipu-v3.h
index 01ab5e0..31b6fde 100644
--- a/include/video/imx-ipu-v3.h
+++ b/include/video/imx-ipu-v3.h
@@ -257,7 +257,9 @@ void ipu_dc_disable(struct ipu_dc *dc);
struct ipu_di *ipu_di_get(struct ipu_soc *ipu, int disp);
void ipu_di_put(struct ipu_di *);
int ipu_di_disable(struct ipu_di *);
+int ipu_di_disable_clock(struct ipu_di *di);
int ipu_di_enable(struct ipu_di *);
+int ipu_di_enable_clock(struct ipu_di *di);
int ipu_di_get_num(struct ipu_di *);
int ipu_di_init_sync_panel(struct ipu_di *, struct ipu_di_signal_cfg *sig);
void ipu_di_uninit_sync_panel(struct ipu_di *di);
--
1.7.9.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2014-10-31 22:57 UTC|newest]
Thread overview: 115+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-31 22:53 [PATCH 00/72] staging imx-drm new features and fixes Steve Longerbeam
2014-10-31 22:53 ` [PATCH 01/72] ARM: dts: imx6qdl-sabrelite: Add HDMI device Steve Longerbeam
2014-10-31 22:53 ` [PATCH 02/72] ARM: dts: imx6qdl-sabreauto: " Steve Longerbeam
2014-10-31 22:53 ` [PATCH 03/72] ARM: dts: imx6qdl: Create imx-drm crtc nodes Steve Longerbeam
2014-11-03 12:31 ` Philipp Zabel
2014-11-03 17:09 ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 04/72] ARM: i.MX6: use pll2_pfd0_352m as clock root of ipu_di Steve Longerbeam
2014-11-03 12:30 ` Philipp Zabel
2014-11-03 19:10 ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 05/72] ARM: i.MX6: select pll3_usb_otg for ldb_di for rev 1.0 chip Steve Longerbeam
2014-11-03 12:30 ` Philipp Zabel
2014-11-03 19:17 ` Steve Longerbeam
2014-11-03 20:06 ` Fabio Estevam
2014-11-04 2:38 ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 06/72] gpu: ipu-cpmem: Add ipu_cpmem_set_uv_offset() Steve Longerbeam
2014-11-03 12:30 ` Philipp Zabel
2014-11-03 22:52 ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 07/72] gpu: ipu-v3: Add ipu_dp_set_chroma_key() Steve Longerbeam
2014-11-03 12:31 ` Philipp Zabel
2014-11-04 1:55 ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 08/72] gpu: ipu-v3: Add ipu_dp_set_gamma_correction() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 09/72] gpu: ipu-v3: Add support for dynamic DC interface pixel maps Steve Longerbeam
2014-10-31 22:53 ` [PATCH 10/72] gpu: ipu-v3: Add ipu_dc_uninit_sync() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 11/72] gpu: ipu-v3: Pass struct ipu_dc to enable/disable Steve Longerbeam
2014-10-31 22:53 ` [PATCH 12/72] gpu: ipu-v3: Add ipu_dp_uninit_channel() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 13/72] gpu: ipu-v3: Pass struct ipu_dp to enable/disable Steve Longerbeam
2014-10-31 22:53 ` [PATCH 14/72] gpu: ipu-v3: Implement use counter for ipu_dc_enable(), ipu_dc_disable() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 15/72] gpu: ipu-v3: fix HDMI timing issues Steve Longerbeam
2014-10-31 22:53 ` [PATCH 16/72] gpu: ipu-v3: Add DMFC/DP/DC/DI module enable/disable debug Steve Longerbeam
2014-10-31 22:54 ` [PATCH 17/72] gpu: ipu-v3: Add ipu_di_uninit_sync_panel() Steve Longerbeam
2014-10-31 22:54 ` Steve Longerbeam [this message]
2014-10-31 22:54 ` [PATCH 19/72] gpu: ipu-v3: Protect more CM reg access with IPU lock Steve Longerbeam
2014-11-04 17:51 ` Philipp Zabel
2014-11-05 1:54 ` Steve Longerbeam
2014-11-05 1:55 ` Steve Longerbeam
2014-10-31 22:54 ` [PATCH 20/72] gpu: ipu-v3: Move DI waveform counter enable/disable to ipu-di Steve Longerbeam
2014-10-31 22:54 ` [PATCH 21/72] gpu: ipu-v3: Update DP sync SRM always in ipu_dp_enable_channel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 22/72] gpu: ipu-v3: Fix indent/ws in ipu-dmfc Steve Longerbeam
2014-10-31 22:54 ` [PATCH 23/72] gpu: ipu-v3: Allow burstsize of 20 in ipu_dmfc_setup_channel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 24/72] gpu: ipu-v3: Remove ipu_dmfc_init_channel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 25/72] gpu: ipu-v3: Consolidate mutex lock in ipu_dmfc_alloc_bandwidth() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 26/72] gpu: ipu-v3: Enumerate the DC channel names Steve Longerbeam
2014-10-31 22:54 ` [PATCH 27/72] gpu: ipu-di: Move ipu pointer init Steve Longerbeam
2014-10-31 22:54 ` [PATCH 28/72] gpu: ipu-di: Add and improve debug/error messages Steve Longerbeam
2014-10-31 22:54 ` [PATCH 29/72] gpu: ipu-v3: Change signal names in struct ipu_di_signal_cfg Steve Longerbeam
2014-10-31 22:54 ` [PATCH 30/72] gpu: ipu-v3: Remove IPU client registration Steve Longerbeam
2014-10-31 22:54 ` [PATCH 31/72] gpu: ipu-di: Set rate of DI pre clock Steve Longerbeam
2014-10-31 22:54 ` [PATCH 32/72] gpu: ipu-v3: Add RGB666 interface pixel map Steve Longerbeam
2014-10-31 22:54 ` [PATCH 33/72] gpu: ipu-cpmem: Pass drm fourcc to ipu_cpmem_set_yuv_* Steve Longerbeam
2014-10-31 22:54 ` [PATCH 34/72] gpu: ipu-v3: Add ipu_drm_fourcc_is_planar() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 35/72] gpu: ipu-v3: Add IDMA channel linking support Steve Longerbeam
2014-10-31 22:54 ` [PATCH 36/72] gpu: ipu-cpmem: Support YVU422 Steve Longerbeam
2014-10-31 22:54 ` [PATCH 37/72] gpu: ipu-cpmem: Add ipu_cpmem_get_burstsize() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 38/72] imx-drm: Crtcs moved to device tree Steve Longerbeam
2014-10-31 22:54 ` [PATCH 39/72] imx-drm: hdmi: optimize i2c write wait Steve Longerbeam
2014-10-31 22:54 ` [PATCH 40/72] imx-drm: parallel-display: Support RGB666 pixel fmt Steve Longerbeam
2014-10-31 22:54 ` [PATCH 41/72] imx-drm: imx-ldb: Add debug to connector/encoder entry points Steve Longerbeam
2014-10-31 22:54 ` [PATCH 42/72] imx-drm: imx-ldb: Implement imx_ldb_encoder_dpms() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 43/72] imx-drm: parallel-display: Fix typo when setting mode type Steve Longerbeam
2014-10-31 22:54 ` [PATCH 44/72] imx-drm: ipuv3-plane: Fix planar formats Steve Longerbeam
2014-10-31 22:54 ` [PATCH 45/72] imx-drm: ipuv3-plane: Allow YUV space for background plane Steve Longerbeam
2014-10-31 22:54 ` [PATCH 46/72] imx-drm: ipuv3-plane: Add more supported pixel formats Steve Longerbeam
2014-10-31 22:54 ` [PATCH 47/72] imx-drm: ipuv3-plane: Implement global alpha and colorkey properties Steve Longerbeam
2014-10-31 22:54 ` [PATCH 48/72] imx-drm: hdmi: rework irq request/free Steve Longerbeam
2014-10-31 22:54 ` [PATCH 49/72] imx-drm: imx-ldb: Add DDC support Steve Longerbeam
2014-11-04 17:52 ` Philipp Zabel
2014-10-31 22:54 ` [PATCH 50/72] imx-drm: Fix separate primary plane objects Steve Longerbeam
2014-10-31 22:54 ` [PATCH 51/72] imx-drm: Move page flip handling to plane driver Steve Longerbeam
2014-10-31 22:54 ` [PATCH 52/72] imx-drm: Reset ipu unit pointers to NULL on errors Steve Longerbeam
2014-10-31 22:54 ` [PATCH 53/72] drm: implement page flipping support for planes Steve Longerbeam
2014-11-01 13:25 ` Rob Clark
2014-10-31 22:54 ` [PATCH 54/72] imx-drm: ipuv3-plane: Assign page_flip method to drm_plane_funcs Steve Longerbeam
2014-10-31 22:54 ` [PATCH 55/72] imx-drm: Implement DRM gamma set Steve Longerbeam
2014-10-31 22:54 ` [PATCH 56/72] imx-drm: Implement custom ioctl to set gamma Steve Longerbeam
2014-10-31 22:54 ` [PATCH 57/72] imx-drm: Add support for interface pixel maps Steve Longerbeam
2014-10-31 22:54 ` [PATCH 58/72] imx-drm: parallel-display: Add interface-pix-map DT property Steve Longerbeam
2014-10-31 22:54 ` [PATCH 59/72] imx-drm: hdmi: set DI clock source to DI pre clock Steve Longerbeam
2014-10-31 22:54 ` [PATCH 60/72] imx-drm: ipuv3-crtc: Set the crtc device name Steve Longerbeam
2014-10-31 22:54 ` [PATCH 61/72] imx-drm: hdmi: Save ipu/di mux for later iomux setup Steve Longerbeam
2014-10-31 22:54 ` [PATCH 62/72] imx-drm: ipuv3-plane: Assign correct dmfc burst size Steve Longerbeam
2014-10-31 22:54 ` [PATCH 63/72] drm_modes: videomode: add pos/neg pixel clock polarity flag Steve Longerbeam
2014-10-31 22:54 ` [PATCH 64/72] imx-drm: ipuv3-crtc: Use DRM mode flags to configure pixel clock polarity Steve Longerbeam
2014-10-31 22:54 ` [PATCH 65/72] imx-drm: imx-ldb: Add all defined of video modes Steve Longerbeam
2014-10-31 22:54 ` [PATCH 66/72] imx-drm: parallel-display: " Steve Longerbeam
2014-10-31 22:54 ` [PATCH 67/72] imx-drm: ipuv3-crtc: Disable fb on crtc unbind Steve Longerbeam
2014-10-31 22:54 ` [PATCH 68/72] imx-drm: imx-ldb: Use DDC probe as connection detect Steve Longerbeam
2014-11-04 17:57 ` Philipp Zabel
2014-10-31 22:54 ` [PATCH 69/72] imx-drm: ipuv3-crtc: Implement mode_set_base Steve Longerbeam
2014-10-31 22:54 ` [PATCH 70/72] imx-drm: Cancel pending page flip events at preclose Steve Longerbeam
2014-10-31 22:54 ` [PATCH 71/72] imx-drm: ipuv3-crtc: Disable overlay plane during crtc disable Steve Longerbeam
2014-10-31 22:54 ` [PATCH 72/72] imx-drm: ipuv3-plane: Enable 8 burst locking Steve Longerbeam
2014-11-01 0:09 ` [PATCH 00/72] staging imx-drm new features and fixes Fabio Estevam
2014-11-01 0:19 ` Steve Longerbeam
2014-11-03 13:12 ` Fabio Estevam
2014-11-03 13:17 ` Fabio Estevam
2014-11-03 13:20 ` Fabio Estevam
2014-11-03 14:13 ` Fabio Estevam
2014-11-03 22:41 ` Steve Longerbeam
2014-11-04 15:15 ` Fabio Estevam
2014-11-02 3:03 ` Steve Longerbeam
2014-11-03 11:17 ` Zubair Lutfullah Kakakhel
2014-11-03 16:04 ` Rob Clark
2014-11-03 16:12 ` Daniel Vetter
2014-11-03 16:14 ` Greg KH
2014-11-03 17:17 ` Daniel Vetter
2014-11-03 17:48 ` Greg KH
2014-11-03 18:58 ` Steve Longerbeam
2014-11-04 2:32 ` Alex Deucher
2014-11-03 18:59 ` Steve Longerbeam
2014-11-03 20:00 ` Fabio Estevam
2014-11-03 22:11 ` Steve Longerbeam
2014-11-04 9:35 ` Philipp Zabel
2014-11-05 1:20 ` Steve Longerbeam
2015-01-17 19:45 ` Fabio Estevam
2015-01-21 17:22 ` Rob Clark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414796095-10107-19-git-send-email-steve_longerbeam@mentor.com \
--to=slongerbeam@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox