From: Vincent Abriou <vincent.abriou@st.com>
To: dri-devel@lists.freedesktop.org
Cc: Vincent Abriou <vincent.abriou@st.com>,
Fabien Dessenne <fabien.dessenne@st.com>,
Benjamin Gaignard <benjamin.gaignard@linaro.org>
Subject: [PATCH 02/10] drm/sti: add debugfs entries for DVO connector
Date: Fri, 12 Feb 2016 10:14:01 +0100 [thread overview]
Message-ID: <1455268449-686-3-git-send-email-vincent.abriou@st.com> (raw)
In-Reply-To: <1455268449-686-1-git-send-email-vincent.abriou@st.com>
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
---
drivers/gpu/drm/sti/sti_dvo.c | 70 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/drivers/gpu/drm/sti/sti_dvo.c b/drivers/gpu/drm/sti/sti_dvo.c
index 9e90b74..25f7663 100644
--- a/drivers/gpu/drm/sti/sti_dvo.c
+++ b/drivers/gpu/drm/sti/sti_dvo.c
@@ -6,6 +6,7 @@
#include <linux/clk.h>
#include <linux/component.h>
+#include <linux/debugfs.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
@@ -156,6 +157,69 @@ static void dvo_awg_configure(struct sti_dvo *dvo, u32 *awg_ram_code, int nb)
writel(DVO_AWG_CTRL_EN, dvo->regs + DVO_AWG_DIGSYNC_CTRL);
}
+#define DBGFS_DUMP(reg) seq_printf(s, "\n %-25s 0x%08X", #reg, \
+ readl(dvo->regs + reg))
+
+static void dvo_dbg_awg_microcode(struct seq_file *s, void __iomem *reg)
+{
+ unsigned int i;
+
+ seq_puts(s, "\n\n");
+ seq_puts(s, " DVO AWG microcode:");
+ for (i = 0; i < AWG_MAX_INST; i++) {
+ if (i % 8 == 0)
+ seq_printf(s, "\n %04X:", i);
+ seq_printf(s, " %04X", readl(reg + i * 4));
+ }
+}
+
+static int dvo_dbg_show(struct seq_file *s, void *data)
+{
+ struct drm_info_node *node = s->private;
+ struct sti_dvo *dvo = (struct sti_dvo *)node->info_ent->data;
+ struct drm_device *dev = node->minor->dev;
+ int ret;
+
+ ret = mutex_lock_interruptible(&dev->struct_mutex);
+ if (ret)
+ return ret;
+
+ seq_printf(s, "DVO: (vaddr = 0x%p)", dvo->regs);
+ DBGFS_DUMP(DVO_AWG_DIGSYNC_CTRL);
+ DBGFS_DUMP(DVO_DOF_CFG);
+ DBGFS_DUMP(DVO_LUT_PROG_LOW);
+ DBGFS_DUMP(DVO_LUT_PROG_MID);
+ DBGFS_DUMP(DVO_LUT_PROG_HIGH);
+ dvo_dbg_awg_microcode(s, dvo->regs + DVO_DIGSYNC_INSTR_I);
+ seq_puts(s, "\n");
+
+ mutex_unlock(&dev->struct_mutex);
+ return 0;
+}
+
+static struct drm_info_list dvo_debugfs_files[] = {
+ { "dvo", dvo_dbg_show, 0, NULL },
+};
+
+static void dvo_debugfs_exit(struct sti_dvo *dvo, struct drm_minor *minor)
+{
+ drm_debugfs_remove_files(dvo_debugfs_files,
+ ARRAY_SIZE(dvo_debugfs_files),
+ minor);
+}
+
+static int dvo_debugfs_init(struct sti_dvo *dvo, struct drm_minor *minor)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(dvo_debugfs_files); i++)
+ dvo_debugfs_files[i].data = dvo;
+
+ return drm_debugfs_create_files(dvo_debugfs_files,
+ ARRAY_SIZE(dvo_debugfs_files),
+ minor->debugfs_root, minor);
+}
+
static void sti_dvo_disable(struct drm_bridge *bridge)
{
struct sti_dvo *dvo = bridge->driver_private;
@@ -455,6 +519,9 @@ static int sti_dvo_bind(struct device *dev, struct device *master, void *data)
goto err_sysfs;
}
+ if (dvo_debugfs_init(dvo, drm_dev->primary))
+ DRM_ERROR("DVO debugfs setup failed\n");
+
return 0;
err_sysfs:
@@ -469,6 +536,9 @@ static void sti_dvo_unbind(struct device *dev,
struct device *master, void *data)
{
struct sti_dvo *dvo = dev_get_drvdata(dev);
+ struct drm_device *drm_dev = data;
+
+ dvo_debugfs_exit(dvo, drm_dev->primary);
drm_bridge_remove(dvo->bridge);
}
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2016-02-12 9:14 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-12 9:13 [PATCH 00/10] drm/sti: debugfs Vincent Abriou
2016-02-12 9:14 ` [PATCH 01/10] drm/sti: add debugfs entries for HDMI connector Vincent Abriou
2016-02-12 9:14 ` Vincent Abriou [this message]
2016-02-12 9:14 ` [PATCH 03/10] drm/sti: add debugfs entries for HDA connector Vincent Abriou
2016-02-12 9:14 ` [PATCH 04/10] drm/sti: add debugfs entries for CURSOR plane Vincent Abriou
2016-02-12 9:14 ` [PATCH 05/10] drm/sti: add debugfs entries for GDP planes Vincent Abriou
2016-02-12 9:14 ` [PATCH 06/10] drm/sti: add debugfs entries for HQVDP plane Vincent Abriou
2016-02-12 9:14 ` [PATCH 07/10] drm/sti: add debugfs entries for VID plane Vincent Abriou
2016-02-12 9:14 ` [PATCH 08/10] drm/sti: add debugfs entries for MIXER crtc Vincent Abriou
2016-02-12 9:14 ` [PATCH 09/10] drm/sti: add debugfs entries for TVOUT encoders Vincent Abriou
2016-02-12 9:14 ` [PATCH 10/10] drm/sti: add debugfs fps_show/fps_get mechanism for planes Vincent Abriou
2016-04-22 13:29 ` [PATCH 00/10] drm/sti: debugfs Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455268449-686-3-git-send-email-vincent.abriou@st.com \
--to=vincent.abriou@st.com \
--cc=benjamin.gaignard@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=fabien.dessenne@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox