From: Vincent Abriou <vincent.abriou@st.com>
To: dri-devel@lists.freedesktop.org
Cc: Vincent Abriou <vincent.abriou@st.com>,
Fabien Dessenne <fabien.dessenne@st.com>,
Benjamin Gaignard <benjamin.gaignard@linaro.org>
Subject: [PATCH 03/10] drm/sti: add debugfs entries for HDA connector
Date: Fri, 12 Feb 2016 10:14:02 +0100 [thread overview]
Message-ID: <1455268449-686-4-git-send-email-vincent.abriou@st.com> (raw)
In-Reply-To: <1455268449-686-1-git-send-email-vincent.abriou@st.com>
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
---
drivers/gpu/drm/sti/sti_hda.c | 105 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 104 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sti/sti_hda.c b/drivers/gpu/drm/sti/sti_hda.c
index 293a133..ec0d017 100644
--- a/drivers/gpu/drm/sti/sti_hda.c
+++ b/drivers/gpu/drm/sti/sti_hda.c
@@ -326,6 +326,103 @@ static void hda_enable_hd_dacs(struct sti_hda *hda, bool enable)
}
}
+#define DBGFS_DUMP(reg) seq_printf(s, "\n %-25s 0x%08X", #reg, \
+ readl(hda->regs + reg))
+
+static void hda_dbg_cfg(struct seq_file *s, int val)
+{
+ seq_puts(s, "\tAWG ");
+ seq_puts(s, val & CFG_AWG_ASYNC_EN ? "enabled" : "disabled");
+}
+
+static void hda_dbg_awg_microcode(struct seq_file *s, void __iomem *reg)
+{
+ unsigned int i;
+
+ seq_puts(s, "\n\n");
+ seq_puts(s, " HDA AWG microcode:");
+ for (i = 0; i < AWG_MAX_INST; i++) {
+ if (i % 8 == 0)
+ seq_printf(s, "\n %04X:", i);
+ seq_printf(s, " %04X", readl(reg + i * 4));
+ }
+}
+
+static void hda_dbg_video_dacs_ctrl(struct seq_file *s, void __iomem *reg)
+{
+ u32 val = readl(reg);
+ u32 mask;
+
+ switch ((u32)reg & VIDEO_DACS_CONTROL_MASK) {
+ case VIDEO_DACS_CONTROL_SYSCFG2535:
+ mask = DAC_CFG_HD_OFF_MASK;
+ break;
+ case VIDEO_DACS_CONTROL_SYSCFG5072:
+ mask = DAC_CFG_HD_HZUVW_OFF_MASK;
+ break;
+ default:
+ DRM_DEBUG_DRIVER("Warning: DACS ctrl register not supported!");
+ return;
+ }
+
+ seq_puts(s, "\n");
+ seq_printf(s, "\n %-25s 0x%08X", "VIDEO_DACS_CONTROL", val);
+ seq_puts(s, "\tHD DACs ");
+ seq_puts(s, val & mask ? "disabled" : "enabled");
+}
+
+static int hda_dbg_show(struct seq_file *s, void *data)
+{
+ struct drm_info_node *node = s->private;
+ struct sti_hda *hda = (struct sti_hda *)node->info_ent->data;
+ struct drm_device *dev = node->minor->dev;
+ int ret;
+
+ ret = mutex_lock_interruptible(&dev->struct_mutex);
+ if (ret)
+ return ret;
+
+ seq_printf(s, "HD Analog: (vaddr = 0x%p)", hda->regs);
+ DBGFS_DUMP(HDA_ANA_CFG);
+ hda_dbg_cfg(s, readl(hda->regs + HDA_ANA_CFG));
+ DBGFS_DUMP(HDA_ANA_SCALE_CTRL_Y);
+ DBGFS_DUMP(HDA_ANA_SCALE_CTRL_CB);
+ DBGFS_DUMP(HDA_ANA_SCALE_CTRL_CR);
+ DBGFS_DUMP(HDA_ANA_ANC_CTRL);
+ DBGFS_DUMP(HDA_ANA_SRC_Y_CFG);
+ DBGFS_DUMP(HDA_ANA_SRC_C_CFG);
+ hda_dbg_awg_microcode(s, hda->regs + HDA_SYNC_AWGI);
+ if (hda->video_dacs_ctrl)
+ hda_dbg_video_dacs_ctrl(s, hda->video_dacs_ctrl);
+ seq_puts(s, "\n");
+
+ mutex_unlock(&dev->struct_mutex);
+ return 0;
+}
+
+static struct drm_info_list hda_debugfs_files[] = {
+ { "hda", hda_dbg_show, 0, NULL },
+};
+
+static void hda_debugfs_exit(struct sti_hda *hda, struct drm_minor *minor)
+{
+ drm_debugfs_remove_files(hda_debugfs_files,
+ ARRAY_SIZE(hda_debugfs_files),
+ minor);
+}
+
+static int hda_debugfs_init(struct sti_hda *hda, struct drm_minor *minor)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(hda_debugfs_files); i++)
+ hda_debugfs_files[i].data = hda;
+
+ return drm_debugfs_create_files(hda_debugfs_files,
+ ARRAY_SIZE(hda_debugfs_files),
+ minor->debugfs_root, minor);
+}
+
/**
* Configure AWG, writing instructions
*
@@ -688,6 +785,9 @@ static int sti_hda_bind(struct device *dev, struct device *master, void *data)
/* force to disable hd dacs at startup */
hda_enable_hd_dacs(hda, false);
+ if (hda_debugfs_init(hda, drm_dev->primary))
+ DRM_ERROR("HDA debugfs setup failed\n");
+
return 0;
err_sysfs:
@@ -700,7 +800,10 @@ err_connector:
static void sti_hda_unbind(struct device *dev,
struct device *master, void *data)
{
- /* do nothing */
+ struct sti_hda *hda = dev_get_drvdata(dev);
+ struct drm_device *drm_dev = data;
+
+ hda_debugfs_exit(hda, drm_dev->primary);
}
static const struct component_ops sti_hda_ops = {
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2016-02-12 9:14 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-12 9:13 [PATCH 00/10] drm/sti: debugfs Vincent Abriou
2016-02-12 9:14 ` [PATCH 01/10] drm/sti: add debugfs entries for HDMI connector Vincent Abriou
2016-02-12 9:14 ` [PATCH 02/10] drm/sti: add debugfs entries for DVO connector Vincent Abriou
2016-02-12 9:14 ` Vincent Abriou [this message]
2016-02-12 9:14 ` [PATCH 04/10] drm/sti: add debugfs entries for CURSOR plane Vincent Abriou
2016-02-12 9:14 ` [PATCH 05/10] drm/sti: add debugfs entries for GDP planes Vincent Abriou
2016-02-12 9:14 ` [PATCH 06/10] drm/sti: add debugfs entries for HQVDP plane Vincent Abriou
2016-02-12 9:14 ` [PATCH 07/10] drm/sti: add debugfs entries for VID plane Vincent Abriou
2016-02-12 9:14 ` [PATCH 08/10] drm/sti: add debugfs entries for MIXER crtc Vincent Abriou
2016-02-12 9:14 ` [PATCH 09/10] drm/sti: add debugfs entries for TVOUT encoders Vincent Abriou
2016-02-12 9:14 ` [PATCH 10/10] drm/sti: add debugfs fps_show/fps_get mechanism for planes Vincent Abriou
2016-04-22 13:29 ` [PATCH 00/10] drm/sti: debugfs Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455268449-686-4-git-send-email-vincent.abriou@st.com \
--to=vincent.abriou@st.com \
--cc=benjamin.gaignard@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=fabien.dessenne@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox