dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v3 3/9] video: Add generic HDMI infoframe helpers
Date: Wed, 16 Jan 2013 15:27:14 +0200	[thread overview]
Message-ID: <20130116132714.GM3503@intel.com> (raw)
In-Reply-To: <1358173828-31674-4-git-send-email-thierry.reding@avionic-design.de>

On Mon, Jan 14, 2013 at 03:30:22PM +0100, Thierry Reding wrote:
> Add generic helpers to pack HDMI infoframes into binary buffers.
> 
> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
> ---
> Changes in v2:
> - add support for audio, vendor-specific and SPD infoframes
> - add various validity checks on infoframes
> - factor out checksum computation
> 
> Changes in v3:
> - introduce HDMI_INFOFRAME_HEADER_SIZE
> - fix SPD infoframe SDI field offset
> 
>  drivers/video/Kconfig  |   3 +
>  drivers/video/Makefile |   1 +
>  drivers/video/hdmi.c   | 332 +++++++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/hdmi.h   | 221 ++++++++++++++++++++++++++++++++
>  4 files changed, 557 insertions(+)
>  create mode 100644 drivers/video/hdmi.c
>  create mode 100644 include/linux/hdmi.h
> 
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 807c7fa..baa3f90 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -54,6 +54,9 @@ config OF_VIDEOMODE
>  	help
>  	  helper to get videomodes from the devicetree
>  
> +config HDMI
> +	bool
> +
>  menuconfig FB
>  	tristate "Support for frame buffer devices"
>  	---help---
> diff --git a/drivers/video/Makefile b/drivers/video/Makefile
> index f592f3b..0b50082 100644
> --- a/drivers/video/Makefile
> +++ b/drivers/video/Makefile
> @@ -5,6 +5,7 @@
>  # Each configuration option enables a list of files.
>  
>  obj-$(CONFIG_VGASTATE)            += vgastate.o
> +obj-$(CONFIG_HDMI)                += hdmi.o
>  obj-y                             += fb_notify.o
>  obj-$(CONFIG_FB)                  += fb.o
>  fb-y                              := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
> diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
> new file mode 100644
> index 0000000..a84e606
> --- /dev/null
> +++ b/drivers/video/hdmi.c
> @@ -0,0 +1,332 @@
> +/*
> + * Copyright (C) 2012 Avionic Design GmbH
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/errno.h>
> +#include <linux/export.h>
> +#include <linux/hdmi.h>
> +#include <linux/string.h>
> +
> +static void hdmi_infoframe_checksum(void *buffer, size_t size)
> +{
> +	u8 *ptr = buffer;
> +	u8 csum = 0;
> +	size_t i;
> +
> +	/* compute checksum */
> +	for (i = 0; i < size; i++)
> +		csum += ptr[i];
> +
> +	ptr[3] = 256 - csum;
> +}
> +
> +/**
> + * hdmi_avi_infoframe_init() - initialize an HDMI AVI infoframe
> + * @frame: HDMI AVI infoframe
> + *
> + * Returns 0 on success or a negative error code on failure.
> + */
> +int hdmi_avi_infoframe_init(struct hdmi_avi_infoframe *frame)
> +{
> +	if (!frame)
> +		return -EINVAL;

There's quite a bit of error checking all around which seems a bit
pointless since this is all internal stuff. Any errors are bugs in
some driver code, so just letting the thing oops would be fine in my
opinion.

> +	memset(frame, 0, sizeof(*frame));
> +
> +	frame->type = HDMI_INFOFRAME_TYPE_AVI;
> +	frame->version = 2;
> +	frame->length = 13;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(hdmi_avi_infoframe_init);
> +
> +/**
> + * hdmi_avi_infoframe_pack() - write HDMI AVI infoframe to binary buffer
> + * @frame: HDMI AVI infoframe
> + * @buffer: destination buffer
> + * @size: size of buffer
> + *
> + * Packs the information contained in the @frame structure into a binary
> + * representation that can be written into the corresponding controller
> + * registers. Also computes the checksum as required by section 5.3.5 of
> + * the HDMI 1.4 specification.
> + *
> + * Returns the number of bytes packed into the binary buffer or a negative
> + * error code on failure.
> + */
> +ssize_t hdmi_avi_infoframe_pack(struct hdmi_avi_infoframe *frame, void *buffer,
> +				size_t size)
> +{
> +	u8 *ptr = buffer;
> +	size_t length;
> +
> +	if (!frame || !buffer)
> +		return -EINVAL;
> +
> +	length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
> +
> +	if (size < length)
> +		return -ENOSPC;
> +
> +	memset(buffer, 0, length);
> +
> +	ptr[0] = frame->type;
> +	ptr[1] = frame->version;
> +	ptr[2] = frame->length;
> +	ptr[3] = 0; /* checksum */
> +
> +	/* start infoframe payload */
> +	ptr += HDMI_INFOFRAME_HEADER_SIZE;
> +
> +	ptr[0] = ((frame->colorspace & 0x3) << 5) | (frame->scan_mode & 0x3);
> +
> +	if (frame->active_info_valid)
> +		ptr[0] |= BIT(4);
> +
> +	if (frame->horizontal_bar_valid)
> +		ptr[0] |= BIT(3);
> +
> +	if (frame->vertical_bar_valid)
> +		ptr[0] |= BIT(2);
> +
> +	ptr[1] = ((frame->colorimetry & 0x3) << 6) |
> +		 ((frame->picture_aspect & 0x3) << 4) |
> +		 (frame->active_aspect & 0xf);
> +
> +	ptr[2] = ((frame->extended_colorimetry & 0x7) << 4) |
> +		 ((frame->quantization_range & 0x3) << 2) |
> +		 (frame->nups & 0x3);
> +
> +	if (frame->itc)
> +		ptr[2] |= BIT(7);
> +
> +	ptr[3] = frame->video_code & 0x7f;
> +
> +	ptr[4] = ((frame->ycc_quantization_range & 0x3) << 6) |
> +		 ((frame->content_type & 0x3) << 4) |
> +		 (frame->pixel_repeat & 0xf);
> +
> +	ptr[5] = frame->top_bar & 0xff;
> +	ptr[6] = (frame->top_bar >> 8) & 0xff;
> +	ptr[7] = frame->bottom_bar & 0xff;
> +	ptr[8] = (frame->bottom_bar >> 8) & 0xff;
> +	ptr[9] = frame->left_bar & 0xff;
> +	ptr[10] = (frame->left_bar >> 8) & 0xff;
> +	ptr[11] = frame->right_bar & 0xff;
> +	ptr[12] = (frame->right_bar >> 8) & 0xff;
> +
> +	hdmi_infoframe_checksum(buffer, length);
> +
> +	return length;
> +}
> +EXPORT_SYMBOL(hdmi_avi_infoframe_pack);
> +
> +/**
> + * hdmi_spd_infoframe_init() - initialize an HDMI SPD infoframe
> + * @frame: HDMI SPD infoframe
> + * @vendor: vendor string
> + * @product: product string
> + *
> + * Returns 0 on success or a negative error code on failure.
> + */
> +int hdmi_spd_infoframe_init(struct hdmi_spd_infoframe *frame,
> +			    const char *vendor, const char *product)
> +{
> +	if (!frame)
> +		return -EINVAL;
> +
> +	memset(frame, 0, sizeof(*frame));
> +
> +	frame->type = HDMI_INFOFRAME_TYPE_SPD;
> +	frame->version = 1;
> +	frame->length = 25;
> +
> +	strncpy(frame->vendor, vendor, sizeof(frame->vendor));
> +	strncpy(frame->product, product, sizeof(frame->product));
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(hdmi_spd_infoframe_init);
> +
> +/**
> + * hdmi_spd_infoframe_pack() - write HDMI SPD infoframe to binary buffer
> + * @frame: HDMI SPD infoframe
> + * @buffer: destination buffer
> + * @size: size of buffer
> + *
> + * Packs the information contained in the @frame structure into a binary
> + * representation that can be written into the corresponding controller
> + * registers. Also computes the checksum as required by section 5.3.5 of
> + * the HDMI 1.4 specification.
> + *
> + * Returns the number of bytes packed into the binary buffer or a negative
> + * error code on failure.
> + */
> +ssize_t hdmi_spd_infoframe_pack(struct hdmi_spd_infoframe *frame, void *buffer,
> +				size_t size)
> +{
> +	u8 *ptr = buffer;
> +	size_t length, i;
> +
> +	if (!frame || !buffer)
> +		return -EINVAL;
> +
> +	length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
> +
> +	if (size < length)
> +		return -ENOSPC;
> +
> +	memset(buffer, 0, length);
> +
> +	ptr[0] = frame->type;
> +	ptr[1] = frame->version;
> +	ptr[2] = frame->length;
> +	ptr[3] = 0; /* checksum */
> +
> +	/* start infoframe payload */
> +	ptr += HDMI_INFOFRAME_HEADER_SIZE;
> +
> +	for (i = 0; i < sizeof(frame->vendor); i++)
> +		ptr[i] = frame->vendor[i];
> +
> +	for (i = 0; i < sizeof(frame->product); i++)
> +		ptr[8 + i] = frame->product[i];

memcpy()

> +
> +	ptr[24] = frame->sdi;
> +
> +	hdmi_infoframe_checksum(buffer, length);
> +
> +	return length;
> +}
> +EXPORT_SYMBOL(hdmi_spd_infoframe_pack);
> +
> +/**
> + * hdmi_audio_infoframe_init() - initialize an HDMI audio infoframe
> + * @frame: HDMI audio infoframe
> + *
> + * Returns 0 on success or a negative error code on failure.
> + */
> +int hdmi_audio_infoframe_init(struct hdmi_audio_infoframe *frame)
> +{
> +	if (!frame)
> +		return -EINVAL;
> +
> +	memset(frame, 0, sizeof(*frame));
> +
> +	frame->type = HDMI_INFOFRAME_TYPE_AUDIO;
> +	frame->version = 1;
> +	frame->length = 10;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(hdmi_audio_infoframe_init);
> +
> +/**
> + * hdmi_audio_infoframe_pack() - write HDMI audio infoframe to binary buffer
> + * @frame: HDMI audio infoframe
> + * @buffer: destination buffer
> + * @size: size of buffer
> + *
> + * Packs the information contained in the @frame structure into a binary
> + * representation that can be written into the corresponding controller
> + * registers. Also computes the checksum as required by section 5.3.5 of
> + * the HDMI 1.4 specification.
> + *
> + * Returns the number of bytes packed into the binary buffer or a negative
> + * error code on failure.
> + */
> +ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
> +				  void *buffer, size_t size)
> +{
> +	unsigned char channels;
> +	u8 *ptr = buffer;
> +	size_t length;
> +
> +	if (!frame || !buffer)
> +		return -EINVAL;
> +
> +	length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
> +
> +	if (size < length)
> +		return -ENOSPC;
> +
> +	memset(buffer, 0, length);
> +
> +	if (frame->channels >= 2)
> +		channels = frame->channels - 1;
> +	else
> +		channels = 0;
> +
> +	ptr[0] = frame->type;
> +	ptr[1] = frame->version;
> +	ptr[2] = frame->length;
> +	ptr[3] = 0; /* checksum */
> +
> +	/* start infoframe payload */
> +	ptr += HDMI_INFOFRAME_HEADER_SIZE;
> +
> +	ptr[0] = ((frame->coding_type & 0xf) << 4) | (channels & 0x7);
> +	ptr[1] = ((frame->sample_frequency & 0x7) << 2) |
> +		 (frame->sample_size & 0x3);
> +	ptr[2] = 0;
> +	ptr[3] = frame->channel_allocation;
> +	ptr[4] = (frame->level_shift_value & 0xf) << 3;
> +
> +	if (frame->downmix_inhibit)
> +		ptr[4] |= BIT(7);
> +
> +	hdmi_infoframe_checksum(buffer, length);
> +
> +	return length;
> +}
> +EXPORT_SYMBOL(hdmi_audio_infoframe_pack);
> +
> +/**
> + * hdmi_vendor_infoframe_pack() - write a HDMI vendor infoframe to binary
> + *                                buffer
> + * @frame: HDMI vendor infoframe
> + * @buffer: destination buffer
> + * @size: size of buffer
> + *
> + * Packs the information contained in the @frame structure into a binary
> + * representation that can be written into the corresponding controller
> + * registers. Also computes the checksum as required by section 5.3.5 of
> + * the HDMI 1.4 specification.
> + *
> + * Returns the number of bytes packed into the binary buffer or a negative
> + * error code on failure.
> + */
> +ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
> +				   void *buffer, size_t size)
> +{
> +	u8 *ptr = buffer;
> +	size_t length;
> +
> +	if (!frame || !buffer)
> +		return -EINVAL;
> +
> +	length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
> +
> +	if (size < length)
> +		return -ENOSPC;
> +
> +	memset(buffer, 0, length);
> +
> +	ptr[0] = frame->type;
> +	ptr[1] = frame->version;
> +	ptr[2] = frame->length;
> +	ptr[3] = 0; /* checksum */
> +
> +	memcpy(&ptr[HDMI_INFOFRAME_HEADER_SIZE], frame->data, frame->length);
> +
> +	hdmi_infoframe_checksum(buffer, length);
> +
> +	return length;
> +}
> +EXPORT_SYMBOL(hdmi_vendor_infoframe_pack);
> diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
> new file mode 100644
> index 0000000..47d59b1
> --- /dev/null
> +++ b/include/linux/hdmi.h
> @@ -0,0 +1,221 @@
> +/*
> + * Copyright (C) 2012 Avionic Design GmbH
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __LINUX_HDMI_H_
> +#define __LINUX_HDMI_H_
> +
> +#include <linux/types.h>
> +
> +enum hdmi_infoframe_type {
> +	HDMI_INFOFRAME_TYPE_VENOR = 0x81,
> +	HDMI_INFOFRAME_TYPE_AVI = 0x82,
> +	HDMI_INFOFRAME_TYPE_SPD = 0x83,
> +	HDMI_INFOFRAME_TYPE_AUDIO = 0x84,
> +};
> +
> +#define HDMI_INFOFRAME_HEADER_SIZE  4
> +#define HDMI_AVI_INFOFRAME_SIZE    13
> +#define HDMI_SPD_INFOFRAME_SIZE    25
> +#define HDMI_AUDIO_INFOFRAME_SIZE  10
> +
> +enum hdmi_colorspace {
> +	HDMI_COLORSPACE_RGB,
> +	HDMI_COLORSPACE_YUV422,
> +	HDMI_COLORSPACE_YUV444,
> +};
> +
> +enum hdmi_scan_mode {
> +	HDMI_SCAN_MODE_NONE,
> +	HDMI_SCAN_MODE_OVERSCAN,
> +	HDMI_SCAN_MODE_UNDERSCAN,
> +};
> +
> +enum hdmi_colorimetry {
> +	HDMI_COLORIMETRY_NONE,
> +	HDMI_COLORIMETRY_ITU_601,
> +	HDMI_COLORIMETRY_ITU_709,
> +	HDMI_COLORIMETRY_EXTENDED,
> +};
> +
> +enum hdmi_picture_aspect {
> +	HDMI_PICTURE_ASPECT_NONE,
> +	HDMI_PICTURE_ASPECT_4_3,
> +	HDMI_PICTURE_ASPECT_16_9,
> +};
> +
> +enum hdmi_active_aspect {
> +	HDMI_ACTIVE_ASPECT_16_9_TOP = 2,
> +	HDMI_ACTIVE_ASPECT_14_9_TOP = 3,
> +	HDMI_ACTIVE_ASPECT_16_9_CENTER = 4,
> +	HDMI_ACTIVE_ASPECT_PICTURE = 8,
> +	HDMI_ACTIVE_ASPECT_4_3 = 9,
> +	HDMI_ACTIVE_ASPECT_16_9 = 10,
> +	HDMI_ACTIVE_ASPECT_14_9 = 11,
> +	HDMI_ACTIVE_ASPECT_4_3_SP_14_9 = 13,
> +	HDMI_ACTIVE_ASPECT_16_9_SP_14_9 = 14,
> +	HDMI_ACTIVE_ASPECT_16_9_SP_4_3 = 15,
> +};
> +
> +enum hdmi_extended_colorimetry {
> +	HDMI_EXTENDED_COLORIMETRY_XV_YCC_601,
> +	HDMI_EXTENDED_COLORIMETRY_XV_YCC_709,
> +	HDMI_EXTENDED_COLORIMETRY_S_YCC_601,
> +	HDMI_EXTENDED_COLORIMETRY_ADOBE_YCC_601,
> +	HDMI_EXTENDED_COLORIMETRY_ADOBE_RGB,
> +};
> +
> +enum hdmi_quantization_range {
> +	HDMI_QUANTIZATION_RANGE_DEFAULT,
> +	HDMI_QUANTIZATION_RANGE_LIMITED,
> +	HDMI_QUANTIZATION_RANGE_FULL,
> +};
> +
> +/* non-uniform picture scaling */
> +enum hdmi_nups {
> +	HDMI_NUPS_UNKNOWN,
> +	HDMI_NUPS_HORIZONTAL,
> +	HDMI_NUPS_VERTICAL,
> +	HDMI_NUPS_BOTH,
> +};
> +
> +enum hdmi_ycc_quantization_range {
> +	HDMI_YCC_QUANTIZATION_RANGE_LIMITED,
> +	HDMI_YCC_QUANTIZATION_RANGE_FULL,
> +};
> +
> +enum hdmi_content_type {
> +	HDMI_CONTENT_TYPE_NONE,
> +	HDMI_CONTENT_TYPE_PHOTO,
> +	HDMI_CONTENT_TYPE_CINEMA,
> +	HDMI_CONTENT_TYPE_GAME,
> +};
> +
> +struct hdmi_avi_infoframe {
> +	enum hdmi_infoframe_type type;
> +	unsigned char version;
> +	unsigned char length;
> +	enum hdmi_colorspace colorspace;
> +	bool active_info_valid;
> +	bool horizontal_bar_valid;
> +	bool vertical_bar_valid;
> +	enum hdmi_scan_mode scan_mode;
> +	enum hdmi_colorimetry colorimetry;
> +	enum hdmi_picture_aspect picture_aspect;
> +	enum hdmi_active_aspect active_aspect;
> +	bool itc;
> +	enum hdmi_extended_colorimetry extended_colorimetry;
> +	enum hdmi_quantization_range quantization_range;
> +	enum hdmi_nups nups;
> +	unsigned char video_code;
> +	enum hdmi_ycc_quantization_range ycc_quantization_range;
> +	enum hdmi_content_type content_type;
> +	unsigned char pixel_repeat;
> +	unsigned short top_bar;
> +	unsigned short bottom_bar;
> +	unsigned short left_bar;
> +	unsigned short right_bar;
> +};
> +
> +int hdmi_avi_infoframe_init(struct hdmi_avi_infoframe *frame);
> +ssize_t hdmi_avi_infoframe_pack(struct hdmi_avi_infoframe *frame, void *buffer,
> +				size_t size);
> +
> +enum hdmi_spd_sdi {
> +	HDMI_SPD_SDI_UNKNOWN,
> +	HDMI_SPD_SDI_DSTB,
> +	HDMI_SPD_SDI_DVDP,
> +	HDMI_SPD_SDI_DVHS,
> +	HDMI_SPD_SDI_HDDVR,
> +	HDMI_SPD_SDI_DVC,
> +	HDMI_SPD_SDI_DSC,
> +	HDMI_SPD_SDI_VCD,
> +	HDMI_SPD_SDI_GAME,
> +	HDMI_SPD_SDI_PC,
> +	HDMI_SPD_SDI_BD,
> +	HDMI_SPD_SDI_SCD,

I believe SACD is a more correct name.

HD DVD and PMP are missing from this list.

> +};
> +
> +struct hdmi_spd_infoframe {
> +	enum hdmi_infoframe_type type;
> +	unsigned char version;
> +	unsigned char length;
> +	char vendor[8];
> +	char product[16];
> +	enum hdmi_spd_sdi sdi;
> +};
> +
> +int hdmi_spd_infoframe_init(struct hdmi_spd_infoframe *frame,
> +			    const char *vendor, const char *product);
> +ssize_t hdmi_spd_infoframe_pack(struct hdmi_spd_infoframe *frame, void *buffer,
> +				size_t size);
> +
> +enum hdmi_audio_coding_type {
> +	HDMI_AUDIO_CODING_TYPE_STREAM,
> +	HDMI_AUDIO_CODING_TYPE_IEC_60958,
> +	HDMI_AUDIO_CODING_TYPE_AC3,
> +	HDMI_AUDIO_CODING_TYPE_MPEG1,
> +	HDMI_AUDIO_CODING_TYPE_MP3,
> +	HDMI_AUDIO_CODING_TYPE_MPEG2,
> +	HDMI_AUDIO_CODING_TYPE_AAC,
> +	HDMI_AUDIO_CODING_TYPE_DTS,
> +	HDMI_AUDIO_CODING_TYPE_ATRAC,
> +	HDMI_AUDIO_CODING_TYPE_ONE_BIT_AUDIO,
> +	HDMI_AUDIO_CODING_TYPE_DOLBY_DIGITAL_PLUS,
> +	HDMI_AUDIO_CODING_TYPE_DTS_HD,
> +	HDMI_AUDIO_CODING_TYPE_MAT_MLP,
> +	HDMI_AUDIO_CODING_TYPE_DST,
> +	HDMI_AUDIO_CODING_TYPE_WMPRO,

These don't always quite match the names in CEA-861-E. Wouldn't it
be better to use matching names?

Also the audio coding extension type is missing.

> +};
> +
> +enum hdmi_audio_sample_size {
> +	HDMI_AUDIO_SAMPLE_SIZE_STREAM,
> +	HDMI_AUDIO_SAMPLE_SIZE_16,
> +	HDMI_AUDIO_SAMPLE_SIZE_20,
> +	HDMI_AUDIO_SAMPLE_SIZE_24,
> +};
> +
> +enum hdmi_audio_sample_frequency {
> +	HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM,
> +	HDMI_AUDIO_SAMPLE_FREQUENCY_32000,
> +	HDMI_AUDIO_SAMPLE_FREQUENCY_44100,
> +	HDMI_AUDIO_SAMPLE_FREQUENCY_48000,
> +	HDMI_AUDIO_SAMPLE_FREQUENCY_88200,
> +	HDMI_AUDIO_SAMPLE_FREQUENCY_96000,
> +	HDMI_AUDIO_SAMPLE_FREQUENCY_176400,
> +	HDMI_AUDIO_SAMPLE_FREQUENCY_192000,
> +};
> +
> +struct hdmi_audio_infoframe {
> +	enum hdmi_infoframe_type type;
> +	unsigned char version;
> +	unsigned char length;
> +	unsigned char channels;
> +	enum hdmi_audio_coding_type coding_type;
> +	enum hdmi_audio_sample_size sample_size;
> +	enum hdmi_audio_sample_frequency sample_frequency;
> +	unsigned char channel_allocation;
> +	unsigned char level_shift_value;
> +	bool downmix_inhibit;
> +
> +};
> +
> +int hdmi_audio_infoframe_init(struct hdmi_audio_infoframe *frame);
> +ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
> +				  void *buffer, size_t size);
> +
> +struct hdmi_vendor_infoframe {
> +	enum hdmi_infoframe_type type;
> +	unsigned char version;
> +	unsigned char length;
> +	u8 data[27];
> +};
> +
> +ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
> +				   void *buffer, size_t size);
> +
> +#endif /* _DRM_HDMI_H */
> -- 
> 1.8.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel OTC

  reply	other threads:[~2013-01-16 13:27 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-14 14:30 [PATCH v3 0/9] Add HDMI infoframe helpers Thierry Reding
2013-01-14 14:30 ` [PATCH v3 1/9] drm: Make drm_num_cea_modes unsigned Thierry Reding
2013-01-14 14:42   ` Ville Syrjälä
2013-01-14 15:06     ` Thierry Reding
2013-01-14 15:47       ` Ville Syrjälä
2013-01-18 10:30         ` Thierry Reding
2013-01-18 10:51           ` Ville Syrjälä
2013-01-18 11:08             ` Thierry Reding
2013-01-14 14:30 ` [PATCH v3 2/9] drm: Add some missing forward declarations Thierry Reding
2013-01-14 14:30 ` [PATCH v3 3/9] video: Add generic HDMI infoframe helpers Thierry Reding
2013-01-16 13:27   ` Ville Syrjälä [this message]
2013-01-18  8:56     ` Thierry Reding
2013-01-18 10:50       ` Ville Syrjälä
2013-01-14 14:30 ` [PATCH v3 4/9] drm: Add " Thierry Reding
2013-01-14 14:30 ` [PATCH v3 5/9] drm: Add EDID helper documentation Thierry Reding
2013-01-14 14:30 ` [PATCH v3 6/9] drm/tegra: Use generic HDMI infoframe helpers Thierry Reding
2013-01-14 14:30 ` [PATCH v3 7/9] drm/i915: " Thierry Reding
2013-01-14 14:30 ` [PATCH v3 8/9] drm/radeon: " Thierry Reding
2013-01-14 14:30 ` [PATCH v3 9/9] drm: Remove duplicate drm_mode_cea_vic() Thierry Reding
2013-01-14 14:57   ` Ville Syrjälä
2013-01-14 15:03     ` Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130116132714.GM3503@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    --cc=thierry.reding@avionic-design.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox